Commit d1c0a65f authored by Jan Engelhardt's avatar Jan Engelhardt Committed by Jeff Garzik

Use menuconfig objects II - netdev (general+100mbit)

CONFIG_NETDEVICES, CONFIG_NET_ETHERNET:
Change Kconfig objects from "menu, config" into "menuconfig" so
that the user can disable the whole feature without having to
enter the menu first.

CONFIG_SMC9194:
Move it so that it appears correctly in menuconfig.
Signed-off-by: default avatarJan Engelhardt <jengelh@gmx.de>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
parent 8f036c04
......@@ -3,10 +3,7 @@
# Network device configuration
#
menu "Network device support"
depends on NET
config NETDEVICES
menuconfig NETDEVICES
default y if UML
bool "Network device support"
---help---
......@@ -151,11 +148,9 @@ source "drivers/net/phy/Kconfig"
# Ethernet
#
menu "Ethernet (10 or 100Mbit)"
depends on !UML
config NET_ETHERNET
menuconfig NET_ETHERNET
bool "Ethernet (10 or 100Mbit)"
depends on !UML
---help---
Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
type of Local Area Network (LAN) in universities and companies.
......@@ -180,9 +175,10 @@ config NET_ETHERNET
kernel: saying N will just cause the configurator to skip all
the questions about Ethernet network cards. If unsure, say N.
if NET_ETHERNET
config MII
tristate "Generic Media Independent Interface device support"
depends on NET_ETHERNET
help
Most ethernet controllers have MII transceiver either as an external
or internal device. It is safe to say Y or M here even if your
......@@ -190,7 +186,7 @@ config MII
config MACB
tristate "Atmel MACB support"
depends on NET_ETHERNET && (AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263)
depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263
select MII
help
The Atmel MACB ethernet interface is found on many AT32 and AT91
......@@ -203,7 +199,7 @@ source "drivers/net/arm/Kconfig"
config MACE
tristate "MACE (Power Mac ethernet) support"
depends on NET_ETHERNET && PPC_PMAC && PPC32
depends on PPC_PMAC && PPC32
select CRC32
help
Power Macintoshes and clones with Ethernet built-in on the
......@@ -226,7 +222,7 @@ config MACE_AAUI_PORT
config BMAC
tristate "BMAC (G3 ethernet) support"
depends on NET_ETHERNET && PPC_PMAC && PPC32
depends on PPC_PMAC && PPC32
select CRC32
help
Say Y for support of BMAC Ethernet interfaces. These are used on G3
......@@ -237,7 +233,7 @@ config BMAC
config ARIADNE
tristate "Ariadne support"
depends on NET_ETHERNET && ZORRO
depends on ZORRO
help
If you have a Village Tronic Ariadne Ethernet adapter, say Y.
Otherwise, say N.
......@@ -247,7 +243,7 @@ config ARIADNE
config A2065
tristate "A2065 support"
depends on NET_ETHERNET && ZORRO
depends on ZORRO
select CRC32
help
If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
......@@ -258,7 +254,7 @@ config A2065
config HYDRA
tristate "Hydra support"
depends on NET_ETHERNET && ZORRO
depends on ZORRO
select CRC32
help
If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
......@@ -268,7 +264,7 @@ config HYDRA
config ZORRO8390
tristate "Zorro NS8390-based Ethernet support"
depends on NET_ETHERNET && ZORRO
depends on ZORRO
select CRC32
help
This driver is for Zorro Ethernet cards using an NS8390-compatible
......@@ -281,7 +277,7 @@ config ZORRO8390
config APNE
tristate "PCMCIA NE2000 support"
depends on NET_ETHERNET && AMIGA_PCMCIA
depends on AMIGA_PCMCIA
select CRC32
help
If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
......@@ -292,7 +288,7 @@ config APNE
config APOLLO_ELPLUS
tristate "Apollo 3c505 support"
depends on NET_ETHERNET && APOLLO
depends on APOLLO
help
Say Y or M here if your Apollo has a 3Com 3c505 ISA Ethernet card.
If you don't have one made for Apollos, you can use one from a PC,
......@@ -301,7 +297,7 @@ config APOLLO_ELPLUS
config MAC8390
bool "Macintosh NS 8390 based ethernet cards"
depends on NET_ETHERNET && MAC
depends on MAC
select CRC32
help
If you want to include a driver to support Nubus or LC-PDS
......@@ -311,7 +307,7 @@ config MAC8390
config MAC89x0
tristate "Macintosh CS89x0 based ethernet cards"
depends on NET_ETHERNET && MAC
depends on MAC
---help---
Support for CS89x0 chipset based Ethernet cards. If you have a
Nubus or LC-PDS network (Ethernet) card of this type, say Y and
......@@ -324,7 +320,7 @@ config MAC89x0
config MACSONIC
tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)"
depends on NET_ETHERNET && MAC
depends on MAC
---help---
Support for NatSemi SONIC based Ethernet devices. This includes
the onboard Ethernet in many Quadras as well as some LC-PDS,
......@@ -338,7 +334,7 @@ config MACSONIC
config MACMACE
bool "Macintosh (AV) onboard MACE ethernet"
depends on NET_ETHERNET && MAC
depends on MAC
select CRC32
help
Support for the onboard AMD 79C940 MACE Ethernet controller used in
......@@ -348,7 +344,7 @@ config MACMACE
config MVME147_NET
tristate "MVME147 (Lance) Ethernet support"
depends on NET_ETHERNET && MVME147
depends on MVME147
select CRC32
help
Support for the on-board Ethernet interface on the Motorola MVME147
......@@ -358,7 +354,7 @@ config MVME147_NET
config MVME16x_NET
tristate "MVME16x Ethernet support"
depends on NET_ETHERNET && MVME16x
depends on MVME16x
help
This is the driver for the Ethernet interface on the Motorola
MVME162, 166, 167, 172 and 177 boards. Say Y here to include the
......@@ -367,7 +363,7 @@ config MVME16x_NET
config BVME6000_NET
tristate "BVME6000 Ethernet support"
depends on NET_ETHERNET && BVME6000
depends on BVME6000
help
This is the driver for the Ethernet interface on BVME4000 and
BVME6000 VME boards. Say Y here to include the driver for this chip
......@@ -376,7 +372,7 @@ config BVME6000_NET
config ATARILANCE
tristate "Atari Lance support"
depends on NET_ETHERNET && ATARI
depends on ATARI
help
Say Y to include support for several Atari Ethernet adapters based
on the AMD Lance chipset: RieblCard (with or without battery), or
......@@ -384,7 +380,7 @@ config ATARILANCE
config ATARI_BIONET
tristate "BioNet-100 support"
depends on NET_ETHERNET && ATARI && ATARI_ACSI && BROKEN
depends on ATARI && ATARI_ACSI && BROKEN
help
Say Y to include support for BioData's BioNet-100 Ethernet adapter
for the ACSI port. The driver works (has to work...) with a polled
......@@ -392,7 +388,7 @@ config ATARI_BIONET
config ATARI_PAMSNET
tristate "PAMsNet support"
depends on NET_ETHERNET && ATARI && ATARI_ACSI && BROKEN
depends on ATARI && ATARI_ACSI && BROKEN
help
Say Y to include support for the PAMsNet Ethernet adapter for the
ACSI port ("ACSI node"). The driver works (has to work...) with a
......@@ -400,7 +396,7 @@ config ATARI_PAMSNET
config SUN3LANCE
tristate "Sun3/Sun3x on-board LANCE support"
depends on NET_ETHERNET && (SUN3 || SUN3X)
depends on SUN3 || SUN3X
help
Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
featured an AMD Lance 10Mbit Ethernet controller on board; say Y
......@@ -413,7 +409,7 @@ config SUN3LANCE
config SUN3_82586
bool "Sun3 on-board Intel 82586 support"
depends on NET_ETHERNET && SUN3
depends on SUN3
help
This driver enables support for the on-board Intel 82586 based
Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards. Note
......@@ -422,7 +418,7 @@ config SUN3_82586
config HPLANCE
bool "HP on-board LANCE support"
depends on NET_ETHERNET && DIO
depends on DIO
select CRC32
help
If you want to use the builtin "LANCE" Ethernet controller on an
......@@ -430,21 +426,21 @@ config HPLANCE
config LASI_82596
tristate "Lasi ethernet"
depends on NET_ETHERNET && GSC
depends on GSC
help
Say Y here to support the builtin Intel 82596 ethernet controller
found in Hewlett-Packard PA-RISC machines with 10Mbit ethernet.
config MIPS_JAZZ_SONIC
tristate "MIPS JAZZ onboard SONIC Ethernet support"
depends on NET_ETHERNET && MACH_JAZZ
depends on MACH_JAZZ
help
This is the driver for the onboard card of MIPS Magnum 4000,
Acer PICA, Olivetti M700-10 and a few other identical OEM systems.
config MIPS_AU1X00_ENET
bool "MIPS AU1000 Ethernet support"
depends on NET_ETHERNET && SOC_AU1X00
depends on SOC_AU1X00
select PHYLIB
select CRC32
help
......@@ -453,11 +449,11 @@ config MIPS_AU1X00_ENET
config NET_SB1250_MAC
tristate "SB1250 Ethernet support"
depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC
depends on SIBYTE_SB1xxx_SOC
config SGI_IOC3_ETH
bool "SGI IOC3 Ethernet"
depends on NET_ETHERNET && PCI && SGI_IP27
depends on PCI && SGI_IP27
select CRC32
select MII
help
......@@ -487,7 +483,7 @@ config SGI_IOC3_ETH_HW_TX_CSUM
config MIPS_SIM_NET
tristate "MIPS simulator Network device"
depends on NET_ETHERNET && MIPS_SIM
depends on MIPS_SIM
help
The MIPSNET device is a simple Ethernet network device which is
emulated by the MIPS Simulator.
......@@ -495,11 +491,11 @@ config MIPS_SIM_NET
config SGI_O2MACE_ETH
tristate "SGI O2 MACE Fast Ethernet support"
depends on NET_ETHERNET && SGI_IP32=y
depends on SGI_IP32=y
config STNIC
tristate "National DP83902AV support"
depends on NET_ETHERNET && SUPERH
depends on SUPERH
select CRC32
help
Support for cards based on the National Semiconductor DP83902AV
......@@ -511,7 +507,7 @@ config STNIC
config SUNLANCE
tristate "Sun LANCE support"
depends on NET_ETHERNET && SBUS
depends on SBUS
select CRC32
help
This driver supports the "le" interface present on all 32-bit Sparc
......@@ -524,7 +520,7 @@ config SUNLANCE
config HAPPYMEAL
tristate "Sun Happy Meal 10/100baseT support"
depends on NET_ETHERNET && (SBUS || PCI)
depends on SBUS || PCI
select CRC32
help
This driver supports the "hme" interface present on most Ultra
......@@ -537,7 +533,7 @@ config HAPPYMEAL
config SUNBMAC
tristate "Sun BigMAC 10/100baseT support (EXPERIMENTAL)"
depends on NET_ETHERNET && SBUS && EXPERIMENTAL
depends on SBUS && EXPERIMENTAL
select CRC32
help
This driver supports the "be" interface available as an Sbus option.
......@@ -548,7 +544,7 @@ config SUNBMAC
config SUNQE
tristate "Sun QuadEthernet support"
depends on NET_ETHERNET && SBUS
depends on SBUS
select CRC32
help
This driver supports the "qe" 10baseT Ethernet device, available as
......@@ -560,7 +556,7 @@ config SUNQE
config SUNGEM
tristate "Sun GEM support"
depends on NET_ETHERNET && PCI
depends on PCI
select CRC32
help
Support for the Sun GEM chip, aka Sun GigabitEthernet/P 2.0. See also
......@@ -568,7 +564,7 @@ config SUNGEM
config CASSINI
tristate "Sun Cassini support"
depends on NET_ETHERNET && PCI
depends on PCI
select CRC32
help
Support for the Sun Cassini chip, aka Sun GigaSwift Ethernet. See also
......@@ -576,7 +572,7 @@ config CASSINI
config NET_VENDOR_3COM
bool "3COM cards"
depends on NET_ETHERNET && (ISA || EISA || MCA || PCI)
depends on ISA || EISA || MCA || PCI
help
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
......@@ -736,7 +732,7 @@ config TYPHOON
config LANCE
tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
depends on NET_ETHERNET && ISA && ISA_DMA_API
depends on ISA && ISA_DMA_API
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
......@@ -748,7 +744,7 @@ config LANCE
config NET_VENDOR_SMC
bool "Western Digital/SMC cards"
depends on NET_ETHERNET && (ISA || MCA || EISA || MAC)
depends on ISA || MCA || EISA || MAC
help
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
......@@ -818,11 +814,27 @@ config ULTRA32
<file:Documentation/networking/net-modules.txt>. The module
will be called smc-ultra32.
config SMC9194
tristate "SMC 9194 support"
depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN)
select CRC32
---help---
This is support for the SMC9xxx based Ethernet cards. Choose this
option if you have a DELL laptop with the docking station, or
another SMC9192/9194 based chipset. Say Y if you want it compiled
into the kernel, and read the file
<file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
available from <http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called smc9194.
config SMC91X
tristate "SMC 91C9x/91C1xxx support"
select CRC32
select MII
depends on NET_ETHERNET && (ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || SOC_AU1X00 || BFIN)
depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || SOC_AU1X00 || BFIN
help
This is a driver for SMC's 91x series of Ethernet chipsets,
including the SMC91C94 and the SMC91C111. Say Y if you want it
......@@ -836,26 +848,10 @@ config SMC91X
module, say M here and read <file:Documentation/kbuild/modules.txt>
as well as <file:Documentation/networking/net-modules.txt>.
config SMC9194
tristate "SMC 9194 support"
depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN)
select CRC32
---help---
This is support for the SMC9xxx based Ethernet cards. Choose this
option if you have a DELL laptop with the docking station, or
another SMC9192/9194 based chipset. Say Y if you want it compiled
into the kernel, and read the file
<file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
available from <http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called smc9194.
config NET_NETX
tristate "NetX Ethernet support"
select MII
depends on NET_ETHERNET && ARCH_NETX
depends on ARCH_NETX
help
This is support for the Hilscher netX builtin Ethernet ports
......@@ -865,7 +861,7 @@ config NET_NETX
config DM9000
tristate "DM9000 support"
depends on (ARM || MIPS) && NET_ETHERNET
depends on ARM || MIPS
select CRC32
select MII
---help---
......@@ -879,7 +875,7 @@ config SMC911X
tristate "SMSC LAN911[5678] support"
select CRC32
select MII
depends on NET_ETHERNET && ARCH_PXA
depends on ARCH_PXA
help
This is a driver for SMSC's LAN911x series of Ethernet chipsets
including the new LAN9115, LAN9116, LAN9117, and LAN9118.
......@@ -893,7 +889,7 @@ config SMC911X
config NET_VENDOR_RACAL
bool "Racal-Interlan (Micom) NI cards"
depends on NET_ETHERNET && ISA
depends on ISA
help
If you have a network (Ethernet) card belonging to this class, such
as the NI5010, NI5210 or NI6210, say Y and read the Ethernet-HOWTO,
......@@ -945,7 +941,7 @@ source "drivers/net/tulip/Kconfig"
config AT1700
tristate "AT1700/1720 support (EXPERIMENTAL)"
depends on NET_ETHERNET && (ISA || MCA_LEGACY) && EXPERIMENTAL
depends on (ISA || MCA_LEGACY) && EXPERIMENTAL
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
......@@ -958,7 +954,7 @@ config AT1700
config DEPCA
tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support"
depends on NET_ETHERNET && (ISA || EISA || MCA)
depends on ISA || EISA || MCA
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
......@@ -972,7 +968,7 @@ config DEPCA
config HP100
tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support"
depends on NET_ETHERNET && (ISA || EISA || PCI)
depends on ISA || EISA || PCI
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
......@@ -984,7 +980,7 @@ config HP100
config NET_ISA
bool "Other ISA cards"
depends on NET_ETHERNET && ISA
depends on ISA
---help---
If your network (Ethernet) card hasn't been mentioned yet and its
bus system (that's the way the cards talks to the other components
......@@ -1147,7 +1143,7 @@ config SEEQ8005
config NE2_MCA
tristate "NE/2 (ne2000 MCA version) support"
depends on NET_ETHERNET && MCA_LEGACY
depends on MCA_LEGACY
select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
......@@ -1160,7 +1156,7 @@ config NE2_MCA
config IBMLANA
tristate "IBM LAN Adapter/A support"
depends on NET_ETHERNET && MCA && MCA_LEGACY
depends on MCA && MCA_LEGACY
---help---
This is a Micro Channel Ethernet adapter. You need to set
CONFIG_MCA to use this driver. It is both available as an in-kernel
......@@ -1176,7 +1172,7 @@ config IBMLANA
config IBMVETH
tristate "IBM LAN Virtual Ethernet support"
depends on NET_ETHERNET && PPC_PSERIES
depends on PPC_PSERIES
---help---
This driver supports virtual ethernet adapters on newer IBM iSeries
and pSeries systems.
......@@ -1257,7 +1253,7 @@ config IBM_EMAC_TAH
config NET_PCI
bool "EISA, VLB, PCI and on board controllers"
depends on NET_ETHERNET && (ISA || EISA || PCI)
depends on ISA || EISA || PCI
help
This is another class of network cards which attach directly to the
bus. If you have one of those, say Y and read the Ethernet-HOWTO,
......@@ -1313,6 +1309,7 @@ config AMD8111_ETH
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called amd8111e.
config AMD8111E_NAPI
bool "Enable NAPI support"
depends on AMD8111_ETH
......@@ -1778,7 +1775,7 @@ config SC92031
config NET_POCKET
bool "Pocket and portable adapters"
depends on NET_ETHERNET && PARPORT
depends on PARPORT
---help---
Cute little network (Ethernet) devices which attach to the parallel
port ("pocket adapters"), commonly used with laptops. If you have
......@@ -1847,14 +1844,14 @@ config DE620
config SGISEEQ
tristate "SGI Seeq ethernet controller support"
depends on NET_ETHERNET && SGI_IP22
depends on SGI_IP22
help
Say Y here if you have an Seeq based Ethernet network card. This is
used in many Silicon Graphics machines.
config DECLANCE
tristate "DEC LANCE ethernet controller support"
depends on NET_ETHERNET && MACH_DECSTATION
depends on MACH_DECSTATION
select CRC32
help
This driver is for the series of Ethernet controllers produced by
......@@ -1884,7 +1881,7 @@ config FEC2
config NE_H8300
tristate "NE2000 compatible support for H8/300"
depends on H8300 && NET_ETHERNET
depends on H8300
help
Say Y here if you want to use the NE2000 compatible
controller on the Renesas H8/300 processor.
......@@ -1892,7 +1889,7 @@ config NE_H8300
source "drivers/net/fec_8xx/Kconfig"
source "drivers/net/fs_enet/Kconfig"
endmenu
endif # NET_ETHERNET
#
# Gigabit Ethernet
......@@ -2948,8 +2945,6 @@ config NETCONSOLE
If you want to log kernel messages over the network, enable this.
See <file:Documentation/networking/netconsole.txt> for details.
endif #NETDEVICES
config NETPOLL
def_bool NETCONSOLE
......@@ -2961,4 +2956,4 @@ config NETPOLL_TRAP
config NET_POLL_CONTROLLER
def_bool NETPOLL
endmenu
endif # NETDEVICES
......@@ -4,7 +4,7 @@
#
config ARM_AM79C961A
bool "ARM EBSA110 AM79C961A support"
depends on NET_ETHERNET && ARM && ARCH_EBSA110
depends on ARM && ARCH_EBSA110
select CRC32
help
If you wish to compile a kernel for the EBSA-110, then you should
......@@ -12,21 +12,21 @@ config ARM_AM79C961A
config ARM_ETHER1
tristate "Acorn Ether1 support"
depends on NET_ETHERNET && ARM && ARCH_ACORN
depends on ARM && ARCH_ACORN
help
If you have an Acorn system with one of these (AKA25) network cards,
you should say Y to this option if you wish to use it with Linux.
config ARM_ETHER3
tristate "Acorn/ANT Ether3 support"
depends on NET_ETHERNET && ARM && ARCH_ACORN
depends on ARM && ARCH_ACORN
help
If you have an Acorn system with one of these network cards, you
should say Y to this option if you wish to use it with Linux.
config ARM_ETHERH
tristate "I-cubed EtherH/ANT EtherM support"
depends on NET_ETHERNET && ARM && ARCH_ACORN
depends on ARM && ARCH_ACORN
select CRC32
help
If you have an Acorn system with one of these network cards, you
......@@ -34,7 +34,7 @@ config ARM_ETHERH
config ARM_AT91_ETHER
tristate "AT91RM9200 Ethernet support"
depends on NET_ETHERNET && ARM && ARCH_AT91RM9200
depends on ARM && ARCH_AT91RM9200
select MII
help
If you wish to compile a kernel for the AT91RM9200 and enable
......@@ -42,7 +42,7 @@ config ARM_AT91_ETHER
config EP93XX_ETH
tristate "EP93xx Ethernet support"
depends on NET_ETHERNET && ARM && ARCH_EP93XX
depends on ARM && ARCH_EP93XX
help
This is a driver for the ethernet hardware included in EP93xx CPUs.
Say Y if you are building a kernel for EP93xx based devices.
config FEC_8XX
tristate "Motorola 8xx FEC driver"
depends on NET_ETHERNET && 8xx
depends on 8XX
select MII
config FEC_8XX_GENERIC_PHY
......
config FS_ENET
tristate "Freescale Ethernet Driver"
depends on NET_ETHERNET && (CPM1 || CPM2)
depends on CPM1 || CPM2
select MII
config FS_ENET_HAS_SCC
......
......@@ -2,17 +2,17 @@
# Tulip family network device configuration
#
menu "Tulip family network device support"
depends on NET_ETHERNET && (PCI || EISA || CARDBUS)
config NET_TULIP
menuconfig NET_TULIP
bool "\"Tulip\" family network device support"
depends on PCI || EISA || CARDBUS
help
This selects the "Tulip" family of EISA/PCI network cards.
if NET_TULIP
config DE2104X
tristate "Early DECchip Tulip (dc2104x) PCI support (EXPERIMENTAL)"
depends on NET_TULIP && PCI && EXPERIMENTAL
depends on PCI && EXPERIMENTAL
select CRC32
---help---
This driver is developed for the SMC EtherPower series Ethernet
......@@ -30,7 +30,7 @@ config DE2104X
config TULIP
tristate "DECchip Tulip (dc2114x) PCI support"
depends on NET_TULIP && PCI
depends on PCI
select CRC32
---help---
This driver is developed for the SMC EtherPower series Ethernet
......@@ -95,7 +95,7 @@ config TULIP_NAPI_HW_MITIGATION
config DE4X5
tristate "Generic DECchip & DIGITAL EtherWORKS PCI/EISA"
depends on NET_TULIP && (PCI || EISA)
depends on PCI || EISA
select CRC32
---help---
This is support for the DIGITAL series of PCI/EISA Ethernet cards.
......@@ -112,7 +112,7 @@ config DE4X5
config WINBOND_840
tristate "Winbond W89c840 Ethernet support"
depends on NET_TULIP && PCI
depends on PCI
select CRC32
select MII
help
......@@ -123,7 +123,7 @@ config WINBOND_840
config DM9102
tristate "Davicom DM910x/DM980x support"
depends on NET_TULIP && PCI
depends on PCI
select CRC32
---help---
This driver is for DM9102(A)/DM9132/DM9801 compatible PCI cards from
......@@ -137,7 +137,7 @@ config DM9102
config ULI526X
tristate "ULi M526x controller support"
depends on NET_TULIP && PCI
depends on PCI
select CRC32
---help---
This driver is for ULi M5261/M5263 10/100M Ethernet Controller
......@@ -149,7 +149,7 @@ config ULI526X
config PCMCIA_XIRCOM
tristate "Xircom CardBus support (new driver)"
depends on NET_TULIP && CARDBUS
depends on CARDBUS
---help---
This driver is for the Digital "Tulip" Ethernet CardBus adapters.
It should work with most DEC 21*4*-based chips/ethercards, as well
......@@ -162,7 +162,7 @@ config PCMCIA_XIRCOM
config PCMCIA_XIRTULIP
tristate "Xircom Tulip-like CardBus support (old driver)"
depends on NET_TULIP && CARDBUS && BROKEN_ON_SMP
depends on CARDBUS && BROKEN_ON_SMP
select CRC32
---help---
This driver is for the Digital "Tulip" Ethernet CardBus adapters.
......@@ -174,5 +174,4 @@ config PCMCIA_XIRTULIP
<file:Documentation/networking/net-modules.txt>. The module will
be called xircom_tulip_cb. If unsure, say N.
endmenu
endif # NET_TULIP
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment