Commit d2daeabf authored by David S. Miller's avatar David S. Miller
parents c3b85423 1ce822fa
......@@ -184,8 +184,6 @@ usage should require reading the full document.
!Finclude/net/mac80211.h ieee80211_ctstoself_get
!Finclude/net/mac80211.h ieee80211_ctstoself_duration
!Finclude/net/mac80211.h ieee80211_generic_frame_duration
!Finclude/net/mac80211.h ieee80211_get_hdrlen_from_skb
!Finclude/net/mac80211.h ieee80211_hdrlen
!Finclude/net/mac80211.h ieee80211_wake_queue
!Finclude/net/mac80211.h ieee80211_stop_queue
!Finclude/net/mac80211.h ieee80211_wake_queues
......
config ATH_COMMON
tristate "Atheros Wireless Cards"
depends on WLAN_80211
depends on ATH5K || ATH9K || AR9170_USB
source "drivers/net/wireless/ath/ath5k/Kconfig"
......
......@@ -355,6 +355,13 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq,
}
if (bf_next == NULL) {
/*
* Make sure the last desc is reclaimed if it
* not a holding desc.
*/
if (!bf_last->bf_stale)
list_move_tail(&bf->list, &bf_head);
else
INIT_LIST_HEAD(&bf_head);
} else {
ASSERT(!list_empty(bf_q));
......
......@@ -648,6 +648,7 @@ struct b43_wl {
u8 nr_devs;
bool radiotap_enabled;
bool radio_enabled;
/* The beacon we are currently using (AP or IBSS mode).
* This beacon stuff is protected by the irq_lock. */
......
......@@ -3497,8 +3497,8 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
if (phy->ops->set_rx_antenna)
phy->ops->set_rx_antenna(dev, antenna);
if (!!conf->radio_enabled != phy->radio_on) {
if (conf->radio_enabled) {
if (wl->radio_enabled != phy->radio_on) {
if (wl->radio_enabled) {
b43_software_rfkill(dev, false);
b43info(dev->wl, "Radio turned on by software\n");
if (!dev->radio_hw_enable) {
......@@ -4339,6 +4339,7 @@ static int b43_op_start(struct ieee80211_hw *hw)
wl->beacon0_uploaded = 0;
wl->beacon1_uploaded = 0;
wl->beacon_templates_virgin = 1;
wl->radio_enabled = 1;
mutex_lock(&wl->mutex);
......@@ -4378,6 +4379,7 @@ static void b43_op_stop(struct ieee80211_hw *hw)
if (b43_status(dev) >= B43_STAT_STARTED)
b43_wireless_core_stop(dev);
b43_wireless_core_exit(dev);
wl->radio_enabled = 0;
mutex_unlock(&wl->mutex);
cancel_work_sync(&(wl->txpower_adjust_work));
......@@ -4560,6 +4562,7 @@ static int b43_wireless_core_attach(struct b43_wldev *dev)
B43_WARN_ON(1);
dev->phy.gmode = have_2ghz_phy;
dev->phy.radio_on = 1;
tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0;
b43_wireless_core_reset(dev, tmp);
......
......@@ -35,6 +35,7 @@
static /*const */ struct pcmcia_device_id b43_pcmcia_tbl[] = {
PCMCIA_DEVICE_MANF_CARD(0x2D0, 0x448),
PCMCIA_DEVICE_MANF_CARD(0x2D0, 0x476),
PCMCIA_DEVICE_NULL,
};
......
......@@ -607,6 +607,7 @@ struct b43legacy_wl {
u8 nr_devs;
bool radiotap_enabled;
bool radio_enabled;
/* The beacon we are currently using (AP or IBSS mode).
* This beacon stuff is protected by the irq_lock. */
......
......@@ -2689,8 +2689,8 @@ static int b43legacy_op_dev_config(struct ieee80211_hw *hw,
/* Antennas for RX and management frame TX. */
b43legacy_mgmtframe_txantenna(dev, antenna_tx);
if (!!conf->radio_enabled != phy->radio_on) {
if (conf->radio_enabled) {
if (wl->radio_enabled != phy->radio_on) {
if (wl->radio_enabled) {
b43legacy_radio_turn_on(dev);
b43legacyinfo(dev->wl, "Radio turned on by software\n");
if (!dev->radio_hw_enable)
......@@ -3441,6 +3441,7 @@ static int b43legacy_op_start(struct ieee80211_hw *hw)
wl->beacon0_uploaded = 0;
wl->beacon1_uploaded = 0;
wl->beacon_templates_virgin = 1;
wl->radio_enabled = 1;
mutex_lock(&wl->mutex);
......@@ -3479,6 +3480,7 @@ static void b43legacy_op_stop(struct ieee80211_hw *hw)
if (b43legacy_status(dev) >= B43legacy_STAT_STARTED)
b43legacy_wireless_core_stop(dev);
b43legacy_wireless_core_exit(dev);
wl->radio_enabled = 0;
mutex_unlock(&wl->mutex);
}
......@@ -3620,6 +3622,7 @@ static int b43legacy_wireless_core_attach(struct b43legacy_wldev *dev)
have_bphy = 1;
dev->phy.gmode = (have_gphy || have_bphy);
dev->phy.radio_on = 1;
tmp = dev->phy.gmode ? B43legacy_TMSLOW_GMODE : 0;
b43legacy_wireless_core_reset(dev, tmp);
......
......@@ -4,6 +4,15 @@ config IWM
depends on CFG80211
select WIRELESS_EXT
select FW_LOADER
help
The Intel Wireless Multicomm 3200 hardware is a combo
card with GPS, Bluetooth, WiMax and 802.11 radios. It
runs over SDIO and is typically found on Moorestown
based platform. This driver takes care of the 802.11
part, which is a fullmac one.
If you choose to build it as a module, it'll be called
iwmc3200wifi.ko.
config IWM_DEBUG
bool "Enable full debugging output in iwmc3200wifi"
......
......@@ -418,6 +418,7 @@ static bool mac80211_hwsim_tx_frame(struct ieee80211_hw *hw,
continue;
if (!data2->started || !hwsim_ps_rx_ok(data2, skb) ||
!data->channel || !data2->channel ||
data->channel->center_freq != data2->channel->center_freq ||
!(data->group & data2->group))
continue;
......
......@@ -912,13 +912,14 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb)
}
__skb_unlink(entry, &priv->tx_queue);
spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
frame_len = entry->len;
entry_hdr = (struct p54_hdr *) entry->data;
entry_data = (struct p54_tx_data *) entry_hdr->data;
if (priv->tx_stats[entry_data->hw_queue].len)
priv->tx_stats[entry_data->hw_queue].len--;
priv->stats.dot11ACKFailureCount += payload->tries - 1;
spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
/*
* Frames in P54_QUEUE_FWSCAN and P54_QUEUE_BEACON are
......
......@@ -38,7 +38,6 @@ static struct usb_device_id usb_ids[] = {
/* ZD1211 */
{ USB_DEVICE(0x0ace, 0x1211), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x0ace, 0xa211), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x07b8, 0x6001), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x126f, 0xa006), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x6891, 0xa727), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x0df6, 0x9071), .driver_info = DEVICE_ZD1211 },
......@@ -61,6 +60,7 @@ static struct usb_device_id usb_ids[] = {
{ USB_DEVICE(0x157e, 0x300a), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x0105, 0x145f), .driver_info = DEVICE_ZD1211 },
/* ZD1211B */
{ USB_DEVICE(0x054c, 0x0257), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x0ace, 0x1215), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x0ace, 0xb215), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x157e, 0x300d), .driver_info = DEVICE_ZD1211B },
......@@ -87,6 +87,7 @@ static struct usb_device_id usb_ids[] = {
{ USB_DEVICE(0x0471, 0x1237), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x07fa, 0x1196), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x0df6, 0x0036), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x07b8, 0x6001), .driver_info = DEVICE_ZD1211B },
/* "Driverless" devices that need ejecting */
{ USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER },
{ USB_DEVICE(0x0ace, 0x20ff), .driver_info = DEVICE_INSTALLER },
......
......@@ -171,7 +171,7 @@ static int hp_wmi_tablet_state(void)
static int hp_wmi_set_block(void *data, bool blocked)
{
unsigned long b = (unsigned long) data;
int query = BIT(b + 8) | ((!!blocked) << b);
int query = BIT(b + 8) | ((!blocked) << b);
return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, query);
}
......
......@@ -678,7 +678,8 @@ int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
sprom->board_rev = tuple.TupleData[1];
break;
case SSB_PCMCIA_CIS_PA:
GOTO_ERROR_ON(tuple.TupleDataLen != 9,
GOTO_ERROR_ON((tuple.TupleDataLen != 9) &&
(tuple.TupleDataLen != 10),
"pa tpl size");
sprom->pa0b0 = tuple.TupleData[1] |
((u16)tuple.TupleData[2] << 8);
......@@ -718,7 +719,8 @@ int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
sprom->antenna_gain.ghz5.a3 = tuple.TupleData[1];
break;
case SSB_PCMCIA_CIS_BFLAGS:
GOTO_ERROR_ON(tuple.TupleDataLen != 3,
GOTO_ERROR_ON((tuple.TupleDataLen != 3) &&
(tuple.TupleDataLen != 5),
"bfl tpl size");
sprom->boardflags_lo = tuple.TupleData[1] |
((u16)tuple.TupleData[2] << 8);
......
......@@ -99,7 +99,6 @@ enum rfkill_user_states {
#undef RFKILL_STATE_UNBLOCKED
#undef RFKILL_STATE_HARD_BLOCKED
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/mutex.h>
......
......@@ -637,7 +637,7 @@ static void mesh_queue_preq(struct mesh_path *mpath, u8 flags)
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
struct mesh_preq_queue *preq_node;
preq_node = kmalloc(sizeof(struct mesh_preq_queue), GFP_KERNEL);
preq_node = kmalloc(sizeof(struct mesh_preq_queue), GFP_ATOMIC);
if (!preq_node) {
printk(KERN_DEBUG "Mesh HWMP: could not allocate PREQ node\n");
return;
......
......@@ -66,7 +66,7 @@ rix_to_ndx(struct minstrel_sta_info *mi, int rix)
for (i = rix; i >= 0; i--)
if (mi->r[i].rix == rix)
break;
WARN_ON(mi->r[i].rix != rix);
WARN_ON(i < 0);
return i;
}
......@@ -181,6 +181,9 @@ minstrel_tx_status(void *priv, struct ieee80211_supported_band *sband,
break;
ndx = rix_to_ndx(mi, ar[i].idx);
if (ndx < 0)
continue;
mi->r[ndx].attempts += ar[i].count;
if ((i != IEEE80211_TX_MAX_RATES - 1) && (ar[i + 1].idx < 0))
......
......@@ -447,6 +447,7 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
rdev = __cfg80211_drv_from_info(info);
if (IS_ERR(rdev)) {
mutex_unlock(&cfg80211_mutex);
result = PTR_ERR(rdev);
goto unlock;
}
......
......@@ -366,7 +366,6 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev,
found = rb_find_bss(dev, res);
if (found) {
kref_get(&found->ref);
found->pub.beacon_interval = res->pub.beacon_interval;
found->pub.tsf = res->pub.tsf;
found->pub.signal = res->pub.signal;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment