Merge bk://kernel.bkbits.net/gregkh/linux/pci-2.6

into ppc970.osdl.org:/home/torvalds/v2.6/linux

drivers/base/power/resume.c

@@ -35,7 +35,10 @@ void dpm_resume(void)
 		struct list_head * entry = dpm_off.next;
 		struct device * dev = to_device(entry);
 		list_del_init(entry);
+
+		if (!dev->power.prev_state)
 			resume_device(dev);
+
 		list_add_tail(entry,&dpm_active);
 	}
 }

drivers/base/power/runtime.c

@@ -12,9 +12,11 @@
 
 static void runtime_resume(struct device * dev)
 {
+	dev_dbg(dev, "resuming\n");
 	if (!dev->power.power_state)
 		return;
-	resume_device(dev);
+	if (!resume_device(dev))
+		dev->power.power_state = 0;
 }
 
 

drivers/base/power/suspend.c

@@ -39,16 +39,13 @@ int suspend_device(struct device * dev, u32 state)
 {
 	int error = 0;
 
-	if (dev->bus && dev->bus->suspend)
+	dev_dbg(dev, "suspending\n");
+
+	dev->power.prev_state = dev->power.power_state;
+
+	if (dev->bus && dev->bus->suspend && !dev->power.power_state)
 		error = dev->bus->suspend(dev,state);
 
-	if (!error) {
-		list_del(&dev->power.entry);
-		list_add(&dev->power.entry,&dpm_off);
-	} else if (error == -EAGAIN) {
-		list_del(&dev->power.entry);
-		list_add(&dev->power.entry,&dpm_off_irq);
-	}
 	return error;
 }
 
@@ -81,11 +78,18 @@ int device_suspend(u32 state)
 	while(!list_empty(&dpm_active)) {
 		struct list_head * entry = dpm_active.prev;
 		struct device * dev = to_device(entry);
-		if ((error = suspend_device(dev,state))) {
-			if (error != -EAGAIN)
+		error = suspend_device(dev,state);
+
+		if (!error) {
+			list_del(&dev->power.entry);
+			list_add(&dev->power.entry,&dpm_off);
+		} else if (error == -EAGAIN) {
+			list_del(&dev->power.entry);
+			list_add(&dev->power.entry,&dpm_off_irq);
+		} else {
+			printk(KERN_ERR "Could not suspend device %s: "
+				"error %d\n", kobject_name(&dev->kobj), error);
 			goto Error;
-			else
-				error = 0;
 		}
 	}
  Done:

drivers/char/watchdog/alim1535_wdt.c

@@ -16,6 +16,7 @@
 #include <linux/notifier.h>
 #include <linux/reboot.h>
 #include <linux/init.h>
+#include <linux/fs.h>
 #include <linux/pci.h>
 
 #include <asm/uaccess.h>

drivers/char/watchdog/alim7101_wdt.c

@@ -24,6 +24,7 @@
 #include <linux/notifier.h>
 #include <linux/reboot.h>
 #include <linux/init.h>
+#include <linux/fs.h>
 #include <linux/pci.h>
 
 #include <asm/io.h>

drivers/char/watchdog/sc1200wdt.c

@@ -38,6 +38,7 @@
 #include <linux/reboot.h>
 #include <linux/init.h>
 #include <linux/pnp.h>
+#include <linux/fs.h>
 #include <linux/pci.h>
 
 #include <asm/semaphore.h>

drivers/char/watchdog/sc520_wdt.c

@@ -23,7 +23,6 @@
  *	-	Switched to private locks not lock_kernel
  *	-	Used ioremap/writew/readw
  *	-	Added NOWAYOUT support
- *
  *	4/12 - 2002 Changes by Rob Radez <rob@osinvestor.com>
  *	-	Change comments
  *	-	Eliminate fop_llseek
@@ -39,6 +38,10 @@
  *	-	use module_param
  *	-	made timeout (the emulated heartbeat) a module_param
  *	-	made the keepalive ping an internal subroutine
+ *	3/27 - 2004 Changes by Sean Young <sean@mess.org>
+ *	-	set MMCR_BASE to 0xfffef000
+ *	-	CBAR does not need to be read
+ *	-	removed debugging printks
  *
  *  This WDT driver is different from most other Linux WDT
  *  drivers in that the driver will ping the watchdog by itself,
@@ -65,8 +68,16 @@
 #include <asm/uaccess.h>
 #include <asm/system.h>
 
+#define OUR_NAME "sc520_wdt"
+#define PFX OUR_NAME ": "
+
 /*
- * The SC520 can timeout anywhere from 492us to 32.21s.
+ * The AMD Elan SC520 timeout value is 492us times a power of 2 (0-7)
+ *
+ *   0: 492us    2: 1.01s    4: 4.03s   6: 16.22s
+ *   1: 503ms    3: 2.01s    5: 8.05s   7: 32.21s
+ *
+ * We will program the SC520 watchdog for a timeout of 2.01s.
  * If we reset the watchdog every ~250ms we should be safe.
  */
 
@@ -83,25 +94,33 @@ static int timeout = WATCHDOG_TIMEOUT;	/* in seconds, will be multiplied by HZ t
 module_param(timeout, int, 0);
 MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<=3600, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")");
 
-/*
- * AMD Elan SC520 timeout value is 492us times a power of 2 (0-7)
- *
- *   0: 492us    2: 1.01s    4: 4.03s   6: 16.22s
- *   1: 503ms    3: 2.01s    5: 8.05s   7: 32.21s
- */
+#ifdef CONFIG_WATCHDOG_NOWAYOUT
+static int nowayout = 1;
+#else
+static int nowayout = 0;
+#endif
 
-#define TIMEOUT_EXPONENT ( 1 << 3 )  /* 0x08 = 2.01s */
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");
 
-/* #define MMCR_BASE_DEFAULT 0xfffef000 */
-#define MMCR_BASE_DEFAULT ((__u16 *)0xffffe)
-#define OFFS_WDTMRCTL ((unsigned int)0xcb0)
-#define WDT_ENB 0x8000		/* [15] Watchdog Timer Enable */
+/*
+ * AMD Elan SC520 - Watchdog Timer Registers
+ */
+#define MMCR_BASE	0xfffef000	/* The default base address */
+#define OFFS_WDTMRCTL	0xCB0	/* Watchdog Timer Control Register */
+
+/* WDT Control Register bit definitions */
+#define WDT_EXP_SEL_01	0x0001	/* [01] Time-out = 496 us (with 33 Mhz clk). */
+#define WDT_EXP_SEL_02	0x0002	/* [02] Time-out = 508 ms (with 33 Mhz clk). */
+#define WDT_EXP_SEL_03	0x0004	/* [03] Time-out = 1.02 s (with 33 Mhz clk). */
+#define WDT_EXP_SEL_04	0x0008	/* [04] Time-out = 2.03 s (with 33 Mhz clk). */
+#define WDT_EXP_SEL_05	0x0010	/* [05] Time-out = 4.07 s (with 33 Mhz clk). */
+#define WDT_EXP_SEL_06	0x0020	/* [06] Time-out = 8.13 s (with 33 Mhz clk). */
+#define WDT_EXP_SEL_07	0x0040	/* [07] Time-out = 16.27s (with 33 Mhz clk). */
+#define WDT_EXP_SEL_08	0x0080	/* [08] Time-out = 32.54s (with 33 Mhz clk). */
+#define WDT_IRQ_FLG	0x1000	/* [12] Interrupt Request Flag */
 #define WDT_WRST_ENB	0x4000	/* [14] Watchdog Timer Reset Enable */
-
-#define OUR_NAME "sc520_wdt"
-#define PFX OUR_NAME ": "
-
-#define WRT_DOG(data) *wdtmrctl=data
+#define WDT_ENB		0x8000	/* [15] Watchdog Timer Enable */
 
 static __u16 *wdtmrctl;
 
@@ -112,15 +131,6 @@ static unsigned long wdt_is_open;
 static char wdt_expect_close;
 static spinlock_t wdt_spinlock;
 
-#ifdef CONFIG_WATCHDOG_NOWAYOUT
-static int nowayout = 1;
-#else
-static int nowayout = 0;
-#endif
-
-module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");
-
 /*
  *	Whack the dog
  */
@@ -160,7 +170,7 @@ static void wdt_config(int writeval)
 	dummy=readw(wdtmrctl);	/* ensure write synchronization */
 	writew(0xAAAA, wdtmrctl);
 	writew(0x5555, wdtmrctl);
-	/* make WDT configuration register writable one time */
+	/* unlock WDT = make WDT configuration register writable one time */
 	writew(0x3333, wdtmrctl);
 	writew(0xCCCC, wdtmrctl);
 	/* write WDT configuration register */
@@ -168,7 +178,7 @@ static void wdt_config(int writeval)
 	spin_unlock_irqrestore(&wdt_spinlock, flags);
 }
 
-static void wdt_startup(void)
+static int wdt_startup(void)
 {
 	next_heartbeat = jiffies + (timeout * HZ);
 
@@ -176,24 +186,39 @@ static void wdt_startup(void)
 	timer.expires = jiffies + WDT_INTERVAL;
 	add_timer(&timer);
 
-	wdt_config(WDT_ENB | WDT_WRST_ENB | TIMEOUT_EXPONENT);
+	/* Start the watchdog */
+	wdt_config(WDT_ENB | WDT_WRST_ENB | WDT_EXP_SEL_04);
+
 	printk(KERN_INFO PFX "Watchdog timer is now enabled.\n");
+	return 0;
 }
 
-static void wdt_turnoff(void)
+static int wdt_turnoff(void)
 {
-	if (!nowayout) {
 	/* Stop the timer */
 	del_timer(&timer);
+
+	/* Stop the watchdog */
 	wdt_config(0);
+
 	printk(KERN_INFO PFX "Watchdog timer is now disabled...\n");
-	}
+	return 0;
 }
 
-static void wdt_keepalive(void)
+static int wdt_keepalive(void)
 {
 	/* user land ping */
 	next_heartbeat = jiffies + (timeout * HZ);
+	return 0;
+}
+
+static int wdt_set_heartbeat(int t)
+{
+	if ((t < 1) || (t > 3600))	/* arbitrary upper limit */
+		return -EINVAL;
+
+	timeout = t;
+	return 0;
 }
 
 /*
@@ -207,10 +232,8 @@ static ssize_t fop_write(struct file * file, const char * buf, size_t count, lof
 		return -ESPIPE;
 
 	/* See if we got the magic character 'V' and reload the timer */
-	if(count)
-	{
-		if (!nowayout)
-		{
+	if(count) {
+		if (!nowayout) {
 			size_t ofs;
 
 			/* note: just in case someone wrote the magic character
@@ -248,11 +271,11 @@ static int fop_open(struct inode * inode, struct file * file)
 
 static int fop_close(struct inode * inode, struct file * file)
 {
-	if(wdt_expect_close == 42)
+	if(wdt_expect_close == 42) {
 		wdt_turnoff();
-	else {
-		del_timer(&timer);
-		printk(KERN_CRIT PFX "device file closed unexpectedly. Will not stop the WDT!\n");
+	} else {
+		printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
+		wdt_keepalive();
 	}
 	clear_bit(0, &wdt_is_open);
 	wdt_expect_close = 0;
@@ -262,8 +285,7 @@ static int fop_close(struct inode * inode, struct file * file)
 static int fop_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 	unsigned long arg)
 {
-	static struct watchdog_info ident=
-	{
+	static struct watchdog_info ident = {
 		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
 		.identity = "SC520",
@@ -307,10 +329,9 @@ static int fop_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 			if(get_user(new_timeout, (int *)arg))
 				return -EFAULT;
 
-			if(new_timeout < 1 || new_timeout > 3600) /* arbitrary upper limit */
+			if(wdt_set_heartbeat(new_timeout))
 				return -EINVAL;
 
-			timeout = new_timeout;
 			wdt_keepalive();
 			/* Fall through */
 		}
@@ -351,81 +372,59 @@ static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
  *	turn the timebomb registers off.
  */
 
-static struct notifier_block wdt_notifier=
-{
+static struct notifier_block wdt_notifier = {
 	.notifier_call = wdt_notify_sys,
 };
 
 static void __exit sc520_wdt_unload(void)
 {
+	if (!nowayout)
 		wdt_turnoff();
 
 	/* Deregister */
 	misc_deregister(&wdt_miscdev);
-	iounmap(wdtmrctl);
 	unregister_reboot_notifier(&wdt_notifier);
+	iounmap(wdtmrctl);
 }
 
 static int __init sc520_wdt_init(void)
 {
 	int rc = -EBUSY;
-	unsigned long cbar;
 
 	spin_lock_init(&wdt_spinlock);
 
-	if(timeout < 1 || timeout > 3600) /* arbitrary upper limit */
-	{
-		timeout = WATCHDOG_TIMEOUT;
-		printk(KERN_INFO PFX "timeout value must be 1<=x<=3600, using %d\n",
-			timeout);
-	}
-
 	init_timer(&timer);
 	timer.function = wdt_timer_ping;
 	timer.data = 0;
 
-	rc = misc_register(&wdt_miscdev);
-	if (rc)
-	{
-		printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			wdt_miscdev.minor, rc);
+	/* Check that the timeout value is within it's range ; if not reset to the default */
+	if (wdt_set_heartbeat(timeout)) {
+		wdt_set_heartbeat(WATCHDOG_TIMEOUT);
+		printk(KERN_INFO PFX "timeout value must be 1<=timeout<=3600, using %d\n",
+			WATCHDOG_TIMEOUT);
+	}
+
+	wdtmrctl = ioremap((unsigned long)(MMCR_BASE + OFFS_WDTMRCTL), 2);
+	if (!wdtmrctl) {
+		printk(KERN_ERR PFX "Unable to remap memory\n");
+		rc = -ENOMEM;
 		goto err_out_region2;
 	}
 
 	rc = register_reboot_notifier(&wdt_notifier);
-	if (rc)
-	{
+	if (rc) {
 		printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
 			rc);
-		goto err_out_miscdev;
+		goto err_out_ioremap;
 	}
 
-	/* get the Base Address Register */
-	cbar = inl_p(0xfffc);
-	printk(KERN_INFO PFX "CBAR: 0x%08lx\n", cbar);
-	/* check if MMCR aliasing bit is set */
-	if (cbar & 0x80000000) {
-		printk(KERN_INFO PFX "MMCR Aliasing enabled.\n");
-		wdtmrctl = (__u16 *)(cbar & 0x3fffffff);
-	} else {
-		printk(KERN_INFO PFX "!!! WARNING !!!\n"
-		  "\t MMCR Aliasing found NOT enabled!\n"
-		  "\t Using default value of: %p\n"
-		  "\t This has not been tested!\n"
-		  "\t Please email Scott Jennings <smj@oro.net>\n"
-		  "\t  and Bill Jennings <bj@oro.net> if it works!\n"
-		  , MMCR_BASE_DEFAULT
-		  );
-	  wdtmrctl = MMCR_BASE_DEFAULT;
-	}
-
-	wdtmrctl = (__u16 *)((char *)wdtmrctl + OFFS_WDTMRCTL);
-	wdtmrctl = ioremap((unsigned long)wdtmrctl, 2);
-	if (!wdtmrctl) {
-		printk (KERN_ERR PFX "Unable to remap memory.\n");
-		rc = -ENOMEM;
+	rc = misc_register(&wdt_miscdev);
+	if (rc) {
+		printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
+			WATCHDOG_MINOR, rc);
 		goto err_out_notifier;
 	}
+
 	printk(KERN_INFO PFX "WDT driver for SC520 initialised. timeout=%d sec (nowayout=%d)\n",
 		timeout,nowayout);
 
@@ -433,8 +432,8 @@ static int __init sc520_wdt_init(void)
 
 err_out_notifier:
 	unregister_reboot_notifier(&wdt_notifier);
-err_out_miscdev:
-	misc_deregister(&wdt_miscdev);
+err_out_ioremap:
+	iounmap(wdtmrctl);
 err_out_region2:
 	return rc;
 }

drivers/char/watchdog/scx200_wdt.c

@@ -25,6 +25,7 @@
 #include <linux/watchdog.h>
 #include <linux/notifier.h>
 #include <linux/reboot.h>
+#include <linux/fs.h>
 #include <linux/pci.h>
 #include <linux/scx200.h>
 

drivers/char/watchdog/w83627hf_wdt.c

@@ -264,7 +264,7 @@ wdt_init(void)
 {
 	int ret;
 
-	printk(KERN_INFO "WDT driver for Advantech single board computer initialising.\n");
+	printk(KERN_INFO "WDT driver for the Winbond(TM) W83627HF Super I/O chip initialising.\n");
 
 	if (timeout < 1 || timeout > 63) {
 		timeout = WATCHDOG_TIMEOUT;

drivers/firmware/Kconfig

@@ -34,12 +34,4 @@ config EFI_VARS
 	  Subsequent efibootmgr releases may be found at:
 	  http://linux.dell.com/efibootmgr
 
-config SMBIOS
-	tristate "BIOS SMBIOS table access driver."
-	help
-	  Say Y or M here if you want to enable access to the SMBIOS table
-	  via driverfs. It exposes /sys/firmware/smbios/ subdirectory tree
-	  containing a binary dump of the SMBIOS table header as well as the SMBIOS
-	  table.
-
 endmenu

drivers/firmware/Makefile

@@ -3,4 +3,3 @@
 #
 obj-$(CONFIG_EDD)             	+= edd.o
 obj-$(CONFIG_EFI_VARS)		+= efivars.o
-obj-$(CONFIG_SMBIOS)            += smbios.o

drivers/firmware/smbios.c

-/*
- * linux/drivers/firmware/smbios.c
- *  Copyright (C) 2004 Dell Inc.
- *  by Michael Brown <Michael_E_Brown@dell.com>
- *  vim:noet:ts=8:sw=8:filetype=c:textwidth=80:
- *
- * BIOS SMBIOS Table access
- * conformant to DMTF SMBIOS definition
- *   at http://www.dmtf.org/standards/smbios
- *
- * This code takes information provided by SMBIOS tables
- * and presents it in sysfs as:
- *    /sys/firmware/smbios
- *			|--> /table_entry_point
- *			|--> /table
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License v2.0 as published by
- * the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include "smbios.h"
-
-MODULE_AUTHOR("Michael Brown <Michael_E_Brown@Dell.com>");
-MODULE_DESCRIPTION("sysfs interface to SMBIOS information");
-MODULE_LICENSE("GPL");
-
-#define SMBIOS_VERSION "1.0 2004-04-19"
-
-struct smbios_device {
-	struct smbios_table_entry_point table_eps;
-	unsigned int smbios_table_real_length;
-};
-
-/* there shall be only one */
-static struct smbios_device the_smbios_device;
-
-#define to_smbios_device(obj) container_of(obj,struct smbios_device,kobj)
-
-/* don't currently have any "normal" attributes, so we don't need a way to
- * show them. */
-static struct sysfs_ops smbios_attr_ops = { };
-
-static __init int
-checksum_eps(struct smbios_table_entry_point *table_eps)
-{
-	u8 *p = (u8 *)table_eps;
-	u8 checksum = 0;
-	int i=0;
-	for (i=0; i < table_eps->eps_length && i < sizeof(*table_eps); ++i) {
-		checksum += p[i];
-	}
-	return( checksum == 0 );
-}
-
-static __init int
-find_table_entry_point(struct smbios_device *sdev)
-{
-	struct smbios_table_entry_point *table_eps = &(sdev->table_eps);
-	u32 fp = 0xF0000;
-	while (fp < 0xFFFFF) {
-		isa_memcpy_fromio(table_eps, fp, sizeof(*table_eps));
-		if (memcmp(table_eps->anchor, "_SM_", 4)==0 &&
-					checksum_eps(table_eps)) {
-			return 0;
-		}
-		fp += 16;
-	}
-
-	printk(KERN_INFO "SMBIOS table entry point not found in "
-			"0xF0000 - 0xFFFFF\n");
-	return -ENODEV;
-}
-
-static __init int
-find_table_max_address(struct smbios_device *sdev)
-{
-	/* break out on one of three conditions:
-	 *   -- hit table_eps.table_length
-	 *   -- hit number of items that table claims we have
-	 *   -- hit structure type 127
-	 */
-
-	u8 *buf = ioremap(sdev->table_eps.table_address,
-			sdev->table_eps.table_length);
-	u8 *ptr = buf;
-	int count = 0, keep_going = 1;
-	int max_count = sdev->table_eps.table_num_structs;
-	int max_length = sdev->table_eps.table_length;
-	while(keep_going && ((ptr - buf) <= max_length) && count < max_count){
-		if( ptr[0] == 0x7F )   /* ptr[0] is type */
-			keep_going = 0;
-
-		ptr += ptr[1]; /* ptr[1] is length, skip structure */
-		/* skip strings at end of structure */
-		while((ptr-buf) < max_length && (ptr[0] || ptr[1]))
-			++ptr;
-
-		/* string area ends in double-null. skip it. */
-		ptr += 2;
-		++count;
-	}
-	sdev->smbios_table_real_length = (ptr - buf);
-	iounmap(buf);
-
-	if( count != max_count )
-		printk(KERN_INFO "Warning: SMBIOS table structure count"
-				" does not match count specified in the"
-				" table entry point.\n"
-				" Table entry point count: %d\n"
-				" Actual count: %d\n",
-				max_count, count );
-
-	if(keep_going != 0)
-		printk(KERN_INFO "Warning: SMBIOS table does not end with a"
-				" structure type 127. This may indicate a"
-				" truncated table.");
-
-	if(sdev->smbios_table_real_length != max_length)
-		printk(KERN_INFO "Warning: BIOS specified SMBIOS table length"
-				" does not match calculated length.\n"
-				" BIOS specified: %d\n"
-				" calculated length: %d\n",
-				max_length, sdev->smbios_table_real_length);
-
-	return sdev->smbios_table_real_length;
-}
-
-static ssize_t
-smbios_read_table_entry_point(struct kobject *kobj, char *buffer,
-				loff_t pos, size_t size)
-{
-	struct smbios_device *sdev = &the_smbios_device;
-	const char *p = (const char *)&(sdev->table_eps);
-	unsigned int count =
-		size > sizeof(sdev->table_eps) ?
-			sizeof(sdev->table_eps) : size;
-	memcpy( buffer, p, count );
-	return count;
-}
-
-static ssize_t
-smbios_read_table(struct kobject *kobj, char *buffer,
-				loff_t pos, size_t size)
-{
-	struct smbios_device *sdev = &the_smbios_device;
-	u8 *buf;
-	unsigned int count = sdev->smbios_table_real_length - pos;
-	int i = 0;
-	count = count < size ? count : size;
-
-	if (pos > sdev->smbios_table_real_length)
-		return 0;
-
-	buf = ioremap(sdev->table_eps.table_address, sdev->smbios_table_real_length);
-	if (buf == NULL)
-		return -ENXIO;
-
-	/* memcpy( buffer, buf+pos, count ); */
-	for (i = 0; i < count; ++i) {
-		buffer[i] = readb( buf+pos+i );
-	}
-
-	iounmap(buf);
-
-	return count;
-}
-
-static struct bin_attribute tep_attr = {
-	.attr = {.name = "table_entry_point", .owner = THIS_MODULE, .mode = 0444},
-	.size = sizeof(struct smbios_table_entry_point),
-	.read = smbios_read_table_entry_point,
-	/* not writeable */
-};
-
-static struct bin_attribute table_attr = {
-	.attr = { .name = "table", .owner = THIS_MODULE, .mode = 0444 },
-	/* size set later, we don't know it here. */
-	.read = smbios_read_table,
-	/* not writeable */
-};
-
-/* no default attributes yet. */
-static struct attribute * def_attrs[] = { NULL, };
-
-static struct kobj_type ktype_smbios = {
-	.sysfs_ops	= &smbios_attr_ops,
-	.default_attrs	= def_attrs,
-	/* statically allocated, no release method necessary */
-};
-
-static decl_subsys(smbios,&ktype_smbios,NULL);
-
-static void smbios_device_unregister(void)
-{
-	sysfs_remove_bin_file(&smbios_subsys.kset.kobj, &tep_attr );
-	sysfs_remove_bin_file(&smbios_subsys.kset.kobj, &table_attr );
-}
-
-static void __init smbios_device_register(void)
-{
-	sysfs_create_bin_file(&smbios_subsys.kset.kobj, &tep_attr );
-	sysfs_create_bin_file(&smbios_subsys.kset.kobj, &table_attr );
-}
-
-static int __init
-smbios_init(void)
-{
-	int rc=0;
-
-	printk(KERN_INFO "SMBIOS facility v%s\n", SMBIOS_VERSION );
-
-	rc = find_table_entry_point(&the_smbios_device);
-	if (rc)
-		return rc;
-
-	table_attr.size = find_table_max_address(&the_smbios_device);
-
-	rc = firmware_register(&smbios_subsys);
-	if (rc)
-		return rc;
-
-	smbios_device_register();
-
-	return rc;
-}
-
-static void __exit
-smbios_exit(void)
-{
-	smbios_device_unregister();
-	firmware_unregister(&smbios_subsys);
-}
-
-late_initcall(smbios_init);
-module_exit(smbios_exit);

drivers/firmware/smbios.h

-/*
- * linux/drivers/firmware/smbios.c
- *  Copyright (C) 2002, 2003, 2004 Dell Inc.
- *  by Michael Brown <Michael_E_Brown@dell.com>
- *  vim:noet:ts=8:sw=8:filetype=c:textwidth=80:
- *
- * BIOS SMBIOS Table access 
- * conformant to DMTF SMBIOS definition
- *   at http://www.dmtf.org/standards/smbios
- *
- * This code takes information provided by SMBIOS tables
- * and presents it in sysfs.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License v2.0 as published by
- * the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _LINUX_SMBIOS_H
-#define _LINUX_SMBIOS_H
-
-#include <linux/types.h>
-
-struct smbios_table_entry_point {
-	u8 anchor[4];
-	u8 checksum;
-	u8 eps_length;
-	u8 major_ver;
-	u8 minor_ver;
-	u16 max_struct_size;
-	u8 revision;
-	u8 formatted_area[5];
-	u8 dmi_anchor[5];
-	u8 intermediate_checksum;
-	u16 table_length;
-	u32 table_address;
-	u16 table_num_structs;
-	u8 smbios_bcd_revision;
-} __attribute__ ((packed));
-
-struct smbios_structure_header {
-	u8 type;
-	u8 length;
-	u16 handle;
-} __attribute__ ((packed));
-
-#endif				/* _LINUX_SMBIOS_H */

drivers/i2c/busses/Kconfig

@@ -118,8 +118,14 @@ config I2C_I810
 	  will be called i2c-i810.
 
 config I2C_IBM_IIC
-	tristate "IBM IIC I2C"
+	tristate "IBM PPC 4xx on-chip I2C interface"
 	depends on IBM_OCP && I2C
+	help
+	  Say Y here if you want to use IIC peripheral found on 
+	  embedded IBM PPC 4xx based systems. 
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-ibm_iic.
 
 config I2C_IOP3XX
 	tristate "Intel XScale IOP3xx on-chip I2C interface"

drivers/i2c/busses/i2c-ibm_iic.c

@@ -3,7 +3,7 @@
  *
  * Support for the IIC peripheral on IBM PPC 4xx
  *
- * Copyright (c) 2003 Zultys Technologies.
+ * Copyright (c) 2003, 2004 Zultys Technologies.
  * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
  *
  * Based on original work by 
@@ -45,7 +45,7 @@
 
 #include "i2c-ibm_iic.h"
 
-#define DRIVER_VERSION "2.0"
+#define DRIVER_VERSION "2.01"
 
 MODULE_DESCRIPTION("IBM IIC driver v" DRIVER_VERSION);
 MODULE_LICENSE("GPL");
@@ -69,14 +69,14 @@ MODULE_PARM_DESC(iic_fast_poll, "Force fast mode (400 kHz)");
 #endif
 
 #if DBG_LEVEL > 0
-#  define DBG(x...)	printk(KERN_DEBUG "ibm-iic" ##x)
+#  define DBG(f,x...)	printk(KERN_DEBUG "ibm-iic" f, ##x)
 #else
-#  define DBG(x...)	((void)0)
+#  define DBG(f,x...)	((void)0)
 #endif
 #if DBG_LEVEL > 1
-#  define DBG2(x...) 	DBG( ##x )
+#  define DBG2(f,x...) 	DBG(f, ##x)
 #else
-#  define DBG2(x...) 	((void)0)
+#  define DBG2(f,x...) 	((void)0)
 #endif
 #if DBG_LEVEL > 2
 static void dump_iic_regs(const char* header, struct ibm_iic_private* dev)
@@ -455,6 +455,16 @@ static int iic_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	}		
 	for (i = 0; i < num; ++i){
 		if (unlikely(msgs[i].len <= 0)){
+			if (num == 1 && !msgs[0].len){
+				/* Special case for I2C_SMBUS_QUICK emulation.
+				 * Although this logic is FAR FROM PERFECT, this 
+				 * is what previous driver version did.
+				 * IBM IIC doesn't support 0-length transactions
+				 * (except bit-banging through IICx_DIRECTCNTL).
+				 */
+				DBG("%d: zero-length msg kludge\n", dev->idx); 
+				return 0;
+			}
 			DBG("%d: invalid len %d in msg[%d]\n", dev->idx, 
 				msgs[i].len, i);
 			return -EINVAL;
@@ -549,19 +559,24 @@ static int __devinit iic_probe(struct ocp_device *ocp){
 
 	struct ibm_iic_private* dev;
 	struct i2c_adapter* adap;
+	struct ocp_func_iic_data* iic_data = ocp->def->additions;
 	int ret;
-	bd_t* bd = (bd_t*)&__res;
+	
+	if (!iic_data)
+		printk(KERN_WARNING"ibm-iic%d: missing additional data!\n",
+			ocp->def->index);
 
 	if (!(dev = kmalloc(sizeof(*dev), GFP_KERNEL))){
-		printk(KERN_CRIT "ibm-iic: failed to allocate device data\n");
+		printk(KERN_CRIT "ibm-iic%d: failed to allocate device data\n",
+			ocp->def->index);
 		return -ENOMEM;
 	}
 
 	memset(dev, 0, sizeof(*dev));
-	dev->idx = ocp->num;
+	dev->idx = ocp->def->index;
 	ocp_set_drvdata(ocp, dev);
 	
-	if (!(dev->vaddr = ioremap(ocp->paddr, sizeof(struct iic_regs)))){
+	if (!(dev->vaddr = ioremap(ocp->def->paddr, sizeof(struct iic_regs)))){
 		printk(KERN_CRIT "ibm-iic%d: failed to ioremap device registers\n",
 			dev->idx);
 		ret = -ENXIO;
@@ -570,7 +585,7 @@ static int __devinit iic_probe(struct ocp_device *ocp){
 	
 	init_waitqueue_head(&dev->wq);
 
-	dev->irq = iic_force_poll ? -1 : ocp->irq;
+	dev->irq = iic_force_poll ? -1 : ocp->def->irq;
 	if (dev->irq >= 0){
 		/* Disable interrupts until we finish intialization,
 		   assumes level-sensitive IRQ setup...
@@ -589,13 +604,12 @@ static int __devinit iic_probe(struct ocp_device *ocp){
 			dev->idx);
 		
 	/* Board specific settings */
-	BUG_ON(dev->idx >= sizeof(bd->bi_iic_fast) / sizeof(bd->bi_iic_fast[0]));
-	dev->fast_mode = iic_force_fast ? 1 : bd->bi_iic_fast[dev->idx];
+	dev->fast_mode = iic_force_fast ? 1 : (iic_data ? iic_data->fast_mode : 0);
 	
 	/* clckdiv is the same for *all* IIC interfaces, 
 	 * but I'd rather make a copy than introduce another global. --ebs
 	 */
-	dev->clckdiv = iic_clckdiv(bd->bi_opb_busfreq);
+	dev->clckdiv = iic_clckdiv(ocp_sys_info.opb_bus_freq);
 	DBG("%d: clckdiv = %d\n", dev->idx, dev->clckdiv);
 	
 	/* Initialize IIC interface */
@@ -664,7 +678,7 @@ static void __devexit iic_remove(struct ocp_device *ocp)
 
 static struct ocp_device_id ibm_iic_ids[] __devinitdata = 
 {
-	{ .vendor = OCP_VENDOR_IBM, .device = OCP_FUNC_IIC },
+	{ .vendor = OCP_VENDOR_IBM, .function = OCP_FUNC_IIC },
 	{ .vendor = OCP_VENDOR_INVALID }
 };
 
@@ -672,7 +686,7 @@ MODULE_DEVICE_TABLE(ocp, ibm_iic_ids);
 
 static struct ocp_driver ibm_iic_driver =
 {
-	.name 		= "ocp_iic",
+	.name 		= "iic",
 	.id_table	= ibm_iic_ids,
 	.probe		= iic_probe,
 	.remove		= __devexit_p(iic_remove),
@@ -685,7 +699,7 @@ static struct ocp_driver ibm_iic_driver =
 static int __init iic_init(void)
 {
 	printk(KERN_INFO "IBM IIC driver v" DRIVER_VERSION "\n");
-	return ocp_module_init(&ibm_iic_driver);
+	return ocp_register_driver(&ibm_iic_driver);
 }
 
 static void __exit iic_exit(void)

drivers/i2c/busses/i2c-parport.h

@@ -67,13 +67,18 @@ static struct adapter_parm adapter_parm[] = {
 		.getsda	= { 0x40, STAT, 1 },
 		.getscl	= { 0x08, STAT, 1 },
 	},
-	/* type 4: ADM1025 and ADM1032 evaluation boards */
+	/* type 4: ADM1032 evaluation board */
+	{
+		.setsda	= { 0x02, DATA, 1 },
+		.setscl	= { 0x01, DATA, 1 },
+		.getsda	= { 0x10, STAT, 1 },
+		.init	= { 0xf0, DATA, 0 },
+	},
+	/* type 5: ADM1025, ADM1030 and ADM1031 evaluation boards */
 	{
 		.setsda	= { 0x02, DATA, 1 },
 		.setscl	= { 0x01, DATA, 1 },
 		.getsda	= { 0x10, STAT, 1 },
-		.init	= { 0xf0, DATA, 0 }, /* ADM1025 doesn't need this,
-						but it doesn't hurt */
 	},
 };
 
@@ -85,4 +90,5 @@ MODULE_PARM_DESC(type,
 	" 1 = home brew teletext adapter\n"
 	" 2 = Velleman K8000 adapter\n"
 	" 3 = ELV adapter\n"
-	" 4 = ADM1025 and ADM1032 evaluation boards\n");
+	" 4 = ADM1032 evaluation board\n"
+	" 5 = ADM1025, ADM1030 and ADM1031 evaluation boards\n");

drivers/i2c/chips/Kconfig

@@ -145,6 +145,16 @@ config SENSORS_LM90
 	  This driver can also be built as a module.  If so, the module
 	  will be called lm90.
 
+config SENSORS_MAX1619
+	tristate "Maxim MAX1619 sensor chip"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for MAX1619 sensor chip.
+	  
+	  This driver can also be built as a module.  If so, the module
+	  will be called max1619.
+
 config SENSORS_VIA686A
 	tristate "VIA686A"
 	depends on I2C && EXPERIMENTAL

drivers/i2c/chips/Makefile

@@ -19,6 +19,7 @@ obj-$(CONFIG_SENSORS_LM80)	+= lm80.o
 obj-$(CONFIG_SENSORS_LM83)	+= lm83.o
 obj-$(CONFIG_SENSORS_LM85)	+= lm85.o
 obj-$(CONFIG_SENSORS_LM90)	+= lm90.o
+obj-$(CONFIG_SENSORS_MAX1619)	+= max1619.o
 obj-$(CONFIG_SENSORS_PCF8574)	+= pcf8574.o
 obj-$(CONFIG_SENSORS_PCF8591)	+= pcf8591.o
 obj-$(CONFIG_SENSORS_RTC8564)	+= rtc8564.o

drivers/i2c/chips/eeprom.c

@@ -203,11 +203,12 @@ int eeprom_detect(struct i2c_adapter *adapter, int address, int kind)
 	new_client->driver = &eeprom_driver;
 	new_client->flags = 0;
 
+	/* prevent 24RF08 corruption */
+	i2c_smbus_write_quick(new_client, 0);
+
 	/* Now, we do the remaining detection. It is not there, unless you force
 	   the checksum to work out. */
 	if (checksum) {
-		/* prevent 24RF08 corruption */
-		i2c_smbus_write_quick(new_client, 0);
 		cs = 0;
 		for (i = 0; i <= 0x3e; i++)
 			cs += i2c_smbus_read_byte_data(new_client, i);

drivers/i2c/i2c-core.c

@@ -28,6 +28,7 @@
 #include <linux/slab.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
+#include <linux/idr.h>
 #include <linux/seq_file.h>
 #include <asm/uaccess.h>
 
@@ -35,6 +36,7 @@
 static LIST_HEAD(adapters);
 static LIST_HEAD(drivers);
 static DECLARE_MUTEX(core_lists);
+static DEFINE_IDR(i2c_adapter_idr);
 
 int i2c_device_probe(struct device *dev)
 {
@@ -113,13 +115,19 @@ static struct device_attribute dev_attr_client_name = {
  */
 int i2c_add_adapter(struct i2c_adapter *adap)
 {
-	static int nr = 0;
+	int id, res = 0;
 	struct list_head   *item;
 	struct i2c_driver  *driver;
 
 	down(&core_lists);
 
-	adap->nr = nr++;
+	if (idr_pre_get(&i2c_adapter_idr, GFP_KERNEL) == 0) {
+		res = -ENOMEM;
+		goto out_unlock;
+	}
+
+	id = idr_get_new(&i2c_adapter_idr, NULL);
+	adap->nr =  id & MAX_ID_MASK;
 	init_MUTEX(&adap->bus_lock);
 	init_MUTEX(&adap->clist_lock);
 	list_add_tail(&adap->list,&adapters);
@@ -151,10 +159,12 @@ int i2c_add_adapter(struct i2c_adapter *adap)
 			/* We ignore the return code; if it fails, too bad */
 			driver->attach_adapter(adap);
 	}
-	up(&core_lists);
 
 	dev_dbg(&adap->dev, "registered as adapter #%d\n", adap->nr);
-	return 0;
+
+ out_unlock:
+	up(&core_lists);
+	return res;
 }
 
 
@@ -208,6 +218,9 @@ int i2c_del_adapter(struct i2c_adapter *adap)
 	wait_for_completion(&adap->dev_released);
 	wait_for_completion(&adap->class_dev_released);
 
+	/* free dynamically allocated bus id */
+	idr_remove(&i2c_adapter_idr, adap->nr);
+
 	dev_dbg(&adap->dev, "adapter unregistered\n");
 
  out_unlock:

drivers/net/3c59x.c

@@ -520,7 +520,7 @@ static struct vortex_chip_info {
 	{"3c905B-FX Cyclone 100baseFx",
 	 PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, },
 	{"3c905C Tornado",
-	PCI_USES_IO|PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, },
+	 PCI_USES_IO|PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM, 128, },
 	{"3c980 Cyclone",
 	 PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, },
 	{"3c980C Python-T",

drivers/usb/class/usblp.c

@@ -226,11 +226,21 @@ extern struct usb_driver usblp_driver;
 
 static int usblp_ctrl_msg(struct usblp *usblp, int request, int type, int dir, int recip, int value, void *buf, int len)
 {
-	int retval = usb_control_msg(usblp->dev,
+	int retval;
+	int index = usblp->ifnum;
+
+	/* High byte has the interface index.
+	   Low byte has the alternate setting.
+	 */
+	if ((request == USBLP_REQ_GET_ID) && (type == USB_TYPE_CLASS)) {
+	  index = (usblp->ifnum<<8)|usblp->protocol[usblp->current_protocol].alt_setting;
+	}
+
+	retval = usb_control_msg(usblp->dev,
 		dir ? usb_rcvctrlpipe(usblp->dev, 0) : usb_sndctrlpipe(usblp->dev, 0),
-		request, type | dir | recip, value, usblp->ifnum, buf, len, USBLP_WRITE_TIMEOUT);
-	dbg("usblp_control_msg: rq: 0x%02x dir: %d recip: %d value: %d len: %#x result: %d",
-		request, !!dir, recip, value, len, retval);
+		request, type | dir | recip, value, index, buf, len, USBLP_WRITE_TIMEOUT);
+	dbg("usblp_control_msg: rq: 0x%02x dir: %d recip: %d value: %d idx: %d len: %#x result: %d",
+		request, !!dir, recip, value, index, len, retval);
 	return retval < 0 ? retval : 0;
 }
 
@@ -440,6 +450,9 @@ static int usblp_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 		goto done;
 	}
 
+	dbg("usblp_ioctl: cmd=0x%x (%c nr=%d len=%d dir=%d)", cmd, _IOC_TYPE(cmd),
+		_IOC_NR(cmd), _IOC_SIZE(cmd), _IOC_DIR(cmd) );
+
 	if (_IOC_TYPE(cmd) == 'P')	/* new-style ioctl number */
 
 		switch (_IOC_NR(cmd)) {

drivers/usb/core/Makefile

@@ -3,7 +3,7 @@
 #
 
 usbcore-objs	:= usb.o hub.o hcd.o urb.o message.o \
-			config.o file.o buffer.o driverfs.o
+			config.o file.o buffer.o sysfs.o
 
 ifeq ($(CONFIG_PCI),y)
 	usbcore-objs	+= hcd-pci.o

drivers/usb/core/config.c

@@ -465,23 +465,24 @@ int usb_get_configuration(struct usb_device *dev)
 		goto err2;
 	memset(dev->rawdescriptors, 0, length);
 
-	buffer = kmalloc(8, GFP_KERNEL);
+	buffer = kmalloc(USB_DT_CONFIG_SIZE, GFP_KERNEL);
 	if (!buffer)
 		goto err2;
 	desc = (struct usb_config_descriptor *)buffer;
 
 	for (cfgno = 0; cfgno < ncfg; cfgno++) {
-		/* We grab the first 8 bytes so we know how long the whole */
-		/* configuration is */
+		/* We grab just the first descriptor so we know how long
+		 * the whole configuration is */
 		result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno,
-		    buffer, 8);
+		    buffer, USB_DT_CONFIG_SIZE);
 		if (result < 0) {
 			dev_err(ddev, "unable to read config index %d "
-			    "descriptor\n", cfgno);
+			    "descriptor/%s\n", cfgno, "start");
 			goto err;
-		} else if (result < 8) {
+		} else if (result < 4) {
 			dev_err(ddev, "config index %d descriptor too short "
-			    "(expected %i, got %i)\n", cfgno, 8, result);
+			    "(expected %i, got %i)\n", cfgno,
+			    USB_DT_CONFIG_SIZE, result);
 			result = -EINVAL;
 			goto err;
 		}
@@ -498,7 +499,7 @@ int usb_get_configuration(struct usb_device *dev)
 		    bigbuffer, length);
 		if (result < 0) {
 			dev_err(ddev, "unable to read config index %d "
-			    "descriptor\n", cfgno);
+			    "descriptor/%s\n", cfgno, "all");
 			kfree(bigbuffer);
 			goto err;
 		}

drivers/usb/core/hcd.h

@@ -243,13 +243,13 @@ extern void usb_hc_died (struct usb_hcd *hcd);
 extern struct usb_device *usb_alloc_dev(struct usb_device *parent,
 					struct usb_bus *, unsigned port);
 extern int usb_new_device(struct usb_device *dev);
-extern void usb_choose_address(struct usb_device *dev);
 extern void usb_disconnect(struct usb_device **);
+extern void usb_choose_address(struct usb_device *dev);
+extern void usb_release_address(struct usb_device *dev);
 
 /* exported to hub driver ONLY to support usb_reset_device () */
 extern int usb_get_configuration(struct usb_device *dev);
 extern void usb_destroy_configuration(struct usb_device *dev);
-extern int usb_set_address(struct usb_device *dev);
 
 /* use these only before the device's address has been set */
 #define usb_snddefctrl(dev)		((PIPE_CONTROL << 30))

drivers/usb/core/message.c

@@ -1252,7 +1252,7 @@ int usb_set_configuration(struct usb_device *dev, int configuration)
 					ret);
 				continue;
 			}
-			usb_create_driverfs_intf_files (intf);
+			usb_create_sysfs_intf_files (intf);
 		}
 	}
 

drivers/usb/core/driverfs.c → drivers/usb/core/sysfs.c

 /*
- * drivers/usb/core/driverfs.c
+ * drivers/usb/core/sysfs.c
  *
  * (C) Copyright 2002 David Brownell
  * (C) Copyright 2002 Greg Kroah-Hartman
  * (C) Copyright 2002 IBM Corp.
  *
- * All of the driverfs file attributes for usb devices and interfaces.
+ * All of the sysfs file attributes for usb devices and interfaces.
  *
  */
 
@@ -163,7 +163,7 @@ usb_descriptor_attr (bDeviceProtocol, "%02x\n")
 usb_descriptor_attr (bNumConfigurations, "%d\n")
 
 
-void usb_create_driverfs_dev_files (struct usb_device *udev)
+void usb_create_sysfs_dev_files (struct usb_device *udev)
 {
 	struct device *dev = &udev->dev;
 
@@ -217,7 +217,7 @@ usb_intf_attr (bInterfaceSubClass, "%02x\n")
 usb_intf_attr (bInterfaceProtocol, "%02x\n")
 usb_intf_attr (iInterface, "%02x\n")
 
-void usb_create_driverfs_intf_files (struct usb_interface *intf)
+void usb_create_sysfs_intf_files (struct usb_interface *intf)
 {
 	device_create_file (&intf->dev, &dev_attr_bInterfaceNumber);
 	device_create_file (&intf->dev, &dev_attr_bAlternateSetting);

drivers/usb/core/usb.c

@@ -998,12 +998,10 @@ void usb_disconnect(struct usb_device **pdev)
 	 */
 	usb_disable_device(dev, 0);
 
-	dev_dbg (&dev->dev, "unregistering device\n");
 	/* Free the device number and remove the /proc/bus/usb entry */
-	if (dev->devnum > 0) {
-		clear_bit(dev->devnum, dev->bus->devmap.devicemap);
+	dev_dbg (&dev->dev, "unregistering device\n");
+	usb_release_address(dev);
 	usbfs_remove_device(dev);
-	}
 	up(&dev->serialize);
 	device_unregister(&dev->dev);
 }
@@ -1038,24 +1036,23 @@ void usb_choose_address(struct usb_device *dev)
 	}
 }
 
-
-// hub-only!! ... and only exported for reset/reinit path.
-// otherwise used internally, for usb_new_device()
-int usb_set_address(struct usb_device *dev)
+/**
+ * usb_release_address - deallocate device address (usbcore-internal)
+ * @dev: newly removed device
+ *
+ * Removes and deallocates the address assigned to a device.
+ * Only hub drivers (but not virtual root hub drivers for host
+ * controllers) should ever call this.
+ */
+void usb_release_address(struct usb_device *dev)
 {
-	int retval;
-
-	if (dev->devnum == 0)
-		return -EINVAL;
-	if (dev->state != USB_STATE_DEFAULT && dev->state != USB_STATE_ADDRESS)
-		return -EINVAL;
-	retval = usb_control_msg(dev, usb_snddefctrl(dev), USB_REQ_SET_ADDRESS,
-		0, dev->devnum, 0, NULL, 0, HZ * USB_CTRL_SET_TIMEOUT);
-	if (retval == 0)
-		dev->state = USB_STATE_ADDRESS;
-	return retval;
+	if (dev->devnum > 0) {
+		clear_bit(dev->devnum, dev->bus->devmap.devicemap);
+		dev->devnum = -1;
+	}
 }
 
+
 static inline void usb_show_string(struct usb_device *dev, char *id, int index)
 {
 	char *buf;
@@ -1069,6 +1066,37 @@ static inline void usb_show_string(struct usb_device *dev, char *id, int index)
 	kfree(buf);
 }
 
+static int usb_choose_configuration(struct usb_device *dev)
+{
+	int c, i;
+
+	c = dev->config[0].desc.bConfigurationValue;
+	if (dev->descriptor.bNumConfigurations != 1) {
+		for (i = 0; i < dev->descriptor.bNumConfigurations; i++) {
+			struct usb_interface_descriptor	*desc;
+
+			/* heuristic:  Linux is more likely to have class
+			 * drivers, so avoid vendor-specific interfaces.
+			 */
+			desc = &dev->config[i].intf_cache[0]
+					->altsetting->desc;
+			if (desc->bInterfaceClass == USB_CLASS_VENDOR_SPEC)
+				continue;
+			/* COMM/2/all is CDC ACM, except 0xff is MSFT RNDIS */
+			if (desc->bInterfaceClass == USB_CLASS_COMM
+					&& desc->bInterfaceSubClass == 2
+					&& desc->bInterfaceProtocol == 0xff)
+				continue;
+			c = dev->config[i].desc.bConfigurationValue;
+			break;
+		}
+		dev_info(&dev->dev,
+			"configuration #%d chosen from %d choices\n",
+			c, dev->descriptor.bNumConfigurations);
+	}
+	return c;
+}
+
 /*
  * usb_new_device - perform initial device setup (usbcore-internal)
  * @dev: newly addressed device (in ADDRESS state)
@@ -1090,8 +1118,7 @@ static inline void usb_show_string(struct usb_device *dev, char *id, int index)
 int usb_new_device(struct usb_device *dev)
 {
 	int err;
-	int i;
-	int config;
+	int c;
 
 	err = usb_get_configuration(dev);
 	if (err < 0) {
@@ -1119,41 +1146,16 @@ int usb_new_device(struct usb_device *dev)
 		dev_err(&dev->dev, "can't device_add, error %d\n", err);
 		goto fail;
 	}
-	usb_create_driverfs_dev_files (dev);
+	usb_create_sysfs_dev_files (dev);
 
 	/* choose and set the configuration. that registers the interfaces
 	 * with the driver core, and lets usb device drivers bind to them.
 	 * NOTE:  should interact with hub power budgeting.
 	 */
-	config = dev->config[0].desc.bConfigurationValue;
-	if (dev->descriptor.bNumConfigurations != 1) {
-		for (i = 0; i < dev->descriptor.bNumConfigurations; i++) {
-			struct usb_interface_descriptor	*desc;
-
-			/* heuristic:  Linux is more likely to have class
-			 * drivers, so avoid vendor-specific interfaces.
-			 */
-			desc = &dev->config[i].intf_cache[0]
-					->altsetting->desc;
-			if (desc->bInterfaceClass == USB_CLASS_VENDOR_SPEC)
-				continue;
-			/* COMM/2/all is CDC ACM, except 0xff is MSFT RNDIS */
-			if (desc->bInterfaceClass == USB_CLASS_COMM
-					&& desc->bInterfaceSubClass == 2
-					&& desc->bInterfaceProtocol == 0xff)
-				continue;
-			config = dev->config[i].desc.bConfigurationValue;
-			break;
-		}
-		dev_info(&dev->dev,
-			"configuration #%d chosen from %d choices\n",
-			config,
-			dev->descriptor.bNumConfigurations);
-	}
-	err = usb_set_configuration(dev, config);
+	c = usb_choose_configuration(dev);
+	err = usb_set_configuration(dev, c);
 	if (err) {
-		dev_err(&dev->dev, "can't set config #%d, error %d\n",
-			config, err);
+		dev_err(&dev->dev, "can't set config #%d, error %d\n", c, err);
 		device_del(&dev->dev);
 		goto fail;
 	}
@@ -1166,8 +1168,7 @@ int usb_new_device(struct usb_device *dev)
 	return 0;
 fail:
 	dev->state = USB_STATE_NOTATTACHED;
-	clear_bit(dev->devnum, dev->bus->devmap.devicemap);
-	dev->devnum = -1;
+	usb_release_address(dev);
 	usb_put_dev(dev);
 	return err;
 }

drivers/usb/core/usb.h

 /* Functions local to drivers/usb/core/ */
 
-extern void usb_create_driverfs_dev_files (struct usb_device *dev);
-extern void usb_create_driverfs_intf_files (struct usb_interface *intf);
+extern void usb_create_sysfs_dev_files (struct usb_device *dev);
+extern void usb_create_sysfs_intf_files (struct usb_interface *intf);
 extern int usb_probe_interface (struct device *dev);
 extern int usb_unbind_interface (struct device *dev);
 

drivers/usb/gadget/Kconfig

@@ -95,6 +95,7 @@ config USB_PXA2XX
 config USB_PXA2XX_SMALL
 	depends on USB_GADGET_PXA2XX
 	bool
+	default n if USB_ETH_RNDIS
 	default y if USB_ZERO
 	default y if USB_ETH
 	default y if USB_G_SERIAL

drivers/usb/gadget/epautoconf.c

@@ -96,7 +96,8 @@ ep_matches (
 				/* for now, avoid PXA "interrupt-in";
 				 * it's documented as never using DATA1.
 				 */
-				if (gadget_is_pxa (gadget))
+				if (gadget_is_pxa (gadget)
+						&& 'i' == tmp [1])
 					return 0;
 				break;
 			case USB_ENDPOINT_XFER_BULK:

drivers/usb/gadget/serial.c

@@ -154,14 +154,9 @@ do {									\
 
 #define GS_CLOSE_TIMEOUT		15
 
-/* debug macro */
+/* debug settings */
 #if G_SERIAL_DEBUG
 static int debug = G_SERIAL_DEBUG;
-#else
-static int debug = 0;
-#endif
-
-#if G_SERIAL_DEBUG
 
 #define gs_debug(format, arg...) \
 	do { if (debug) printk(KERN_DEBUG format, ## arg); } while(0)
@@ -598,8 +593,10 @@ MODULE_DESCRIPTION(GS_LONG_NAME);
 MODULE_AUTHOR("Al Borchers");
 MODULE_LICENSE("GPL");
 
+#if G_SERIAL_DEBUG
 MODULE_PARM(debug, "i");
 MODULE_PARM_DESC(debug, "Enable debugging, 0=off, 1=on");
+#endif
 
 MODULE_PARM(read_q_size, "i");
 MODULE_PARM_DESC(read_q_size, "Read request queue size, default=32");

drivers/usb/host/uhci-hcd.c

@@ -95,6 +95,10 @@ static kmem_cache_t *uhci_up_cachep;	/* urb_priv */
 static int uhci_get_current_frame_number(struct uhci_hcd *uhci);
 static int uhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb);
 static void uhci_unlink_generic(struct uhci_hcd *uhci, struct urb *urb);
+static void uhci_remove_pending_urbps(struct uhci_hcd *uhci);
+static void uhci_finish_completion(struct usb_hcd *hcd, struct pt_regs *regs);
+static void uhci_free_pending_qhs(struct uhci_hcd *uhci);
+static void uhci_free_pending_tds(struct uhci_hcd *uhci);
 
 static void hc_state_transitions(struct uhci_hcd *uhci);
 
@@ -373,6 +377,7 @@ static void uhci_remove_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
 {
 	struct uhci_qh *pqh;
 	u32 newlink;
+	unsigned int age;
 
 	if (!qh)
 		return;
@@ -425,6 +430,12 @@ static void uhci_remove_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
 	list_del_init(&qh->urbp->queue_list);
 	qh->urbp = NULL;
 
+	age = uhci_get_current_frame_number(uhci);
+	if (age != uhci->qh_remove_age) {
+		uhci_free_pending_qhs(uhci);
+		uhci->qh_remove_age = age;
+	}
+
 	/* Check to see if the remove list is empty. Set the IOC bit */
 	/* to force an interrupt so we can remove the QH */
 	if (list_empty(&uhci->qh_remove_list))
@@ -628,6 +639,7 @@ static void uhci_destroy_urb_priv(struct uhci_hcd *uhci, struct urb *urb)
 {
 	struct list_head *head, *tmp;
 	struct urb_priv *urbp;
+	unsigned int age;
 
 	urbp = (struct urb_priv *)urb->hcpriv;
 	if (!urbp)
@@ -637,6 +649,12 @@ static void uhci_destroy_urb_priv(struct uhci_hcd *uhci, struct urb *urb)
 		dev_warn(uhci_dev(uhci), "urb %p still on uhci->urb_list "
 				"or uhci->remove_list!\n", urb);
 
+	age = uhci_get_current_frame_number(uhci);
+	if (age != uhci->td_remove_age) {
+		uhci_free_pending_tds(uhci);
+		uhci->td_remove_age = age;
+	}
+
 	/* Check to see if the remove list is empty. Set the IOC bit */
 	/* to force an interrupt so we can remove the TD's*/
 	if (list_empty(&uhci->td_remove_list))
@@ -1512,6 +1530,7 @@ static int uhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
 	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 	unsigned long flags;
 	struct urb_priv *urbp;
+	unsigned int age;
 
 	spin_lock_irqsave(&uhci->schedule_lock, flags);
 	urbp = urb->hcpriv;
@@ -1521,6 +1540,12 @@ static int uhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
 
 	uhci_unlink_generic(uhci, urb);
 
+	age = uhci_get_current_frame_number(uhci);
+	if (age != uhci->urb_remove_age) {
+		uhci_remove_pending_urbps(uhci);
+		uhci->urb_remove_age = age;
+	}
+
 	/* If we're the first, set the next interrupt bit */
 	if (list_empty(&uhci->urb_remove_list))
 		uhci_set_next_interrupt(uhci);
@@ -1590,6 +1615,12 @@ static void stall_callback(unsigned long ptr)
 	INIT_LIST_HEAD(&list);
 
 	spin_lock_irqsave(&uhci->schedule_lock, flags);
+	if (!list_empty(&uhci->urb_remove_list) &&
+	    uhci_get_current_frame_number(uhci) != uhci->urb_remove_age) {
+		uhci_remove_pending_urbps(uhci);
+		uhci_finish_completion(hcd, NULL);
+	}
+
 	head = &uhci->urb_list;
 	tmp = head->next;
 	while (tmp != head) {
@@ -1728,6 +1759,7 @@ static irqreturn_t uhci_irq(struct usb_hcd *hcd, struct pt_regs *regs)
 	unsigned int io_addr = uhci->io_addr;
 	unsigned short status;
 	struct list_head *tmp, *head;
+	unsigned int age;
 
 	/*
 	 * Read the interrupt status, and write it back to clear the
@@ -1758,11 +1790,20 @@ static irqreturn_t uhci_irq(struct usb_hcd *hcd, struct pt_regs *regs)
 
 	spin_lock(&uhci->schedule_lock);
 
+	age = uhci_get_current_frame_number(uhci);
+	if (age != uhci->qh_remove_age)
 		uhci_free_pending_qhs(uhci);
+	if (age != uhci->td_remove_age)
 		uhci_free_pending_tds(uhci);
+	if (age != uhci->urb_remove_age)
 		uhci_remove_pending_urbps(uhci);
 
+	if (list_empty(&uhci->urb_remove_list) &&
+	    list_empty(&uhci->td_remove_list) &&
+	    list_empty(&uhci->qh_remove_list))
 		uhci_clear_next_interrupt(uhci);
+	else
+		uhci_set_next_interrupt(uhci);
 
 	/* Walk the list of pending URB's to see which ones completed */
 	head = &uhci->urb_list;

drivers/usb/host/uhci-hcd.h

@@ -357,12 +357,15 @@ struct uhci_hcd {
 
 	/* List of QH's that are done, but waiting to be unlinked (race) */
 	struct list_head qh_remove_list;	/* P: uhci->schedule_lock */
+	unsigned int qh_remove_age;		/* Age in frames */
 
 	/* List of TD's that are done, but waiting to be freed (race) */
 	struct list_head td_remove_list;	/* P: uhci->schedule_lock */
+	unsigned int td_remove_age;		/* Age in frames */
 
 	/* List of asynchronously unlinked URB's */
 	struct list_head urb_remove_list;	/* P: uhci->schedule_lock */
+	unsigned int urb_remove_age;		/* Age in frames */
 
 	/* List of URB's awaiting completion callback */
 	struct list_head complete_list;		/* P: uhci->schedule_lock */

drivers/usb/input/hiddev.c

@@ -232,7 +232,7 @@ static int hiddev_fasync(int fd, struct file *file, int on)
 static struct usb_class_driver hiddev_class;
 static void hiddev_cleanup(struct hiddev *hiddev)
 {
-	hiddev_table[hiddev->hid->minor] = NULL;
+	hiddev_table[hiddev->hid->minor - HIDDEV_MINOR_BASE] = NULL;
 	usb_deregister_dev(hiddev->hid->intf, &hiddev_class);
 	kfree(hiddev);
 }

drivers/usb/input/powermate.c

@@ -33,6 +33,7 @@
 #include <linux/input.h>
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/spinlock.h>
 #include <linux/usb.h>
 
 #define POWERMATE_VENDOR	0x077d	/* Griffin Technology, Inc. */
@@ -67,7 +68,7 @@ struct powermate_device {
 	dma_addr_t configcr_dma;
 	struct usb_device *udev;
 	struct input_dev input;
-	struct semaphore lock;
+	spinlock_t lock;
 	int static_brightness;
 	int pulse_speed;
 	int pulse_table;
@@ -116,7 +117,7 @@ static void powermate_irq(struct urb *urb, struct pt_regs *regs)
 		     __FUNCTION__, retval);
 }
 
-/* Decide if we need to issue a control message and do so. Must be called with pm->lock down */
+/* Decide if we need to issue a control message and do so. Must be called with pm->lock taken */
 static void powermate_sync_state(struct powermate_device *pm)
 {
 	if (pm->requires_update == 0) 
@@ -194,19 +195,22 @@ static void powermate_sync_state(struct powermate_device *pm)
 static void powermate_config_complete(struct urb *urb, struct pt_regs *regs)
 {
 	struct powermate_device *pm = urb->context;
+	unsigned long flags;
 
 	if (urb->status)
 		printk(KERN_ERR "powermate: config urb returned %d\n", urb->status);
 	
-	down(&pm->lock);
+	spin_lock_irqsave(&pm->lock, flags);
 	powermate_sync_state(pm);
-	up(&pm->lock);
+	spin_unlock_irqrestore(&pm->lock, flags);
 }
 
 /* Set the LED up as described and begin the sync with the hardware if required */
 static void powermate_pulse_led(struct powermate_device *pm, int static_brightness, int pulse_speed, 
 				int pulse_table, int pulse_asleep, int pulse_awake)
 {
+	unsigned long flags;
+
 	if (pulse_speed < 0)
 		pulse_speed = 0;
 	if (pulse_table < 0)
@@ -219,7 +223,8 @@ static void powermate_pulse_led(struct powermate_device *pm, int static_brightne
 	pulse_asleep = !!pulse_asleep;
 	pulse_awake = !!pulse_awake;
 
-	down(&pm->lock);
+
+	spin_lock_irqsave(&pm->lock, flags);
 
 	/* mark state updates which are required */
 	if (static_brightness != pm->static_brightness){
@@ -242,7 +247,7 @@ static void powermate_pulse_led(struct powermate_device *pm, int static_brightne
 
 	powermate_sync_state(pm);
    
-	up(&pm->lock);
+	spin_unlock_irqrestore(&pm->lock, flags);
 }
 
 /* Callback from the Input layer when an event arrives from userspace to configure the LED */
@@ -344,7 +349,7 @@ static int powermate_probe(struct usb_interface *intf, const struct usb_device_i
 		return -ENOMEM;
 	}
 
-	init_MUTEX(&pm->lock);
+	pm->lock = SPIN_LOCK_UNLOCKED;
 	init_input_dev(&pm->input);
 
 	/* get a handle to the interrupt data pipe */
@@ -411,7 +416,6 @@ static void powermate_disconnect(struct usb_interface *intf)
 
 	usb_set_intfdata(intf, NULL);
 	if (pm) {
-		down(&pm->lock);
 		pm->requires_update = 0;
 		usb_unlink_urb(pm->irq);
 		input_unregister_device(&pm->input);

drivers/usb/net/kaweth.c

@@ -1240,20 +1240,21 @@ static int usb_start_wait_urb(struct urb *urb, int timeout, int* actual_length)
         init_waitqueue_head(&awd.wqh);
         awd.done = 0;
 
-        set_current_state(TASK_INTERRUPTIBLE);
         add_wait_queue(&awd.wqh, &wait);
         urb->context = &awd;
-        status = usb_submit_urb(urb, GFP_ATOMIC);
+        status = usb_submit_urb(urb, GFP_NOIO);
         if (status) {
                 // something went wrong
                 usb_free_urb(urb);
-                set_current_state(TASK_RUNNING);
                 remove_wait_queue(&awd.wqh, &wait);
                 return status;
         }
 
-	while (timeout && !awd.done)
+	set_current_state(TASK_UNINTERRUPTIBLE);
+	while (timeout && !awd.done) {
 		timeout = schedule_timeout(timeout);
+		set_current_state(TASK_UNINTERRUPTIBLE);
+	}
 
         set_current_state(TASK_RUNNING);
         remove_wait_queue(&awd.wqh, &wait);

drivers/usb/net/pegasus.h

@@ -136,6 +136,7 @@ struct usb_eth_dev {
 #define	VENDOR_LANEED		0x056e
 #define	VENDOR_LINKSYS		0x066b
 #define	VENDOR_MELCO		0x0411
+#define	VENDOR_MICROSOFT	0x045e
 #define	VENDOR_MOBILITY		0x1342
 #define	VENDOR_NETGEAR		0x0846
 #define	VENDOR_OCT		0x0b39
@@ -265,6 +266,8 @@ PEGASUS_DEV( "MELCO/BUFFALO LUA-TX", VENDOR_MELCO, 0x0005,
 		DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "MELCO/BUFFALO LUA2-TX", VENDOR_MELCO, 0x0009,
 		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Microsoft MN-110", VENDOR_MICROSOFT, 0x007a,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "NETGEAR FA101", VENDOR_NETGEAR, 0x1020,
 		DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "OCT Inc.", VENDOR_OCT, 0x0109,

drivers/usb/serial/Kconfig

@@ -314,8 +314,8 @@ config USB_SERIAL_KLSI
 	  module will be called kl5kusb105.
 
 config USB_SERIAL_KOBIL_SCT
-        tristate "USB KOBIL chipcard reader (EXPERIMENTAL)"
-        depends on USB_SERIAL && EXPERIMENTAL
+        tristate "USB KOBIL chipcard reader"
+        depends on USB_SERIAL
         ---help---
           Say Y here if you want to use one of the following KOBIL USB chipcard
           readers:

drivers/usb/serial/ftdi_sio.c

@@ -17,6 +17,9 @@
  * See http://ftdi-usb-sio.sourceforge.net for upto date testing info
  *	and extra documentation
  *
+ * (27/May/2004) Ian Abbott
+ *      Improved throttling code, mostly stolen from the WhiteHEAT driver.
+ *
  * (26/Mar/2004) Jan Capek
  *      Added PID's for ICD-U20/ICD-U40 - incircuit PIC debuggers from CCS Inc.
  *
@@ -584,6 +587,10 @@ static struct usb_driver ftdi_driver = {
 #define BUFSZ 512
 #define PKTSZ 64
 
+/* rx_flags */
+#define THROTTLED		0x01
+#define ACTUALLY_THROTTLED	0x02
+
 struct ftdi_private {
 	ftdi_chip_type_t chip_type;
 				/* type of the device, either SIO or FT8U232AM */
@@ -598,6 +605,8 @@ struct ftdi_private {
 	unsigned long last_dtr_rts;	/* saved modem control outputs */
         wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
  	char prev_status, diff_status;        /* Used for TIOCMIWAIT */
+	__u8 rx_flags;		/* receive state flags (throttling) */
+	spinlock_t rx_lock;	/* spinlock for receive state */
 
 	int force_baud;		/* if non-zero, force the baud rate to this value */
 	int force_rtscts;	/* if non-zero, force RTS-CTS to always be enabled */
@@ -625,6 +634,7 @@ static int  ftdi_write_room		(struct usb_serial_port *port);
 static int  ftdi_chars_in_buffer	(struct usb_serial_port *port);
 static void ftdi_write_bulk_callback	(struct urb *urb, struct pt_regs *regs);
 static void ftdi_read_bulk_callback	(struct urb *urb, struct pt_regs *regs);
+static void ftdi_process_read		(struct usb_serial_port *port);
 static void ftdi_set_termios		(struct usb_serial_port *port, struct termios * old);
 static int  ftdi_tiocmget               (struct usb_serial_port *port, struct file *file);
 static int  ftdi_tiocmset		(struct usb_serial_port *port, struct file * file, unsigned int set, unsigned int clear);
@@ -1110,6 +1120,7 @@ static int ftdi_common_startup (struct usb_serial *serial)
 	}
 	memset(priv, 0, sizeof(*priv));
 
+	spin_lock_init(&priv->rx_lock);
         init_waitqueue_head(&priv->delta_msr_wait);
 	/* This will push the characters through immediately rather
 	   than queue a task to deliver them */
@@ -1273,8 +1284,8 @@ static void ftdi_shutdown (struct usb_serial *serial)
 	 */
 
 	if (priv) {
-		kfree(priv);
 		usb_set_serial_port_data(port, NULL);
+		kfree(priv);
 	}
 } /* ftdi_shutdown */
 
@@ -1284,6 +1295,7 @@ static int  ftdi_open (struct usb_serial_port *port, struct file *filp)
 	struct termios tmp_termios;
 	struct usb_device *dev = port->serial->dev;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
 	
 	int result = 0;
 	char buf[1]; /* Needed for the usb_control_msg I think */
@@ -1317,6 +1329,11 @@ static int  ftdi_open (struct usb_serial_port *port, struct file *filp)
 		err("%s Error from RTS HIGH urb", __FUNCTION__);
 	}
 
+	/* Not throttled */
+	spin_lock_irqsave(&priv->rx_lock, flags);
+	priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
+	spin_unlock_irqrestore(&priv->rx_lock, flags);
+
 	/* Start reading from the device */
 	usb_fill_bulk_urb(port->read_urb, dev,
 		      usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress),
@@ -1370,7 +1387,12 @@ static void ftdi_close (struct usb_serial_port *port, struct file *filp)
 	/* shutdown our bulk read */
 	if (port->read_urb) {
 		if (usb_unlink_urb (port->read_urb) < 0) {
-			err("Error unlinking read urb");
+			/* Generally, this isn't an error.  If the previous
+			   read bulk callback occurred (or is about to occur)
+			   while the port was being closed or was throtted
+			   (and is still throttled), the read urb will not
+			   have been submitted. */
+			dbg("%s - failed to unlink read urb (generally not an error)", __FUNCTION__);
 		}
 	}
 } /* ftdi_close */
@@ -1546,13 +1568,6 @@ static void ftdi_read_bulk_callback (struct urb *urb, struct pt_regs *regs)
 	struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
 	struct tty_struct *tty;
 	struct ftdi_private *priv;
-	char error_flag;
-       	unsigned char *data = urb->transfer_buffer;
-
-	int i;
-	int result;
-	int need_flip;
-	int packet_offset;
 
 	if (urb->number_of_packets > 0) {
 		err("%s transfer_buffer_length %d actual_length %d number of packets %d",__FUNCTION__,
@@ -1560,7 +1575,7 @@ static void ftdi_read_bulk_callback (struct urb *urb, struct pt_regs *regs)
 		err("%s transfer_flags %x ", __FUNCTION__,urb->transfer_flags );
 	}
 
-	dbg("%s", __FUNCTION__);
+	dbg("%s - port %d", __FUNCTION__, port->number);
 
 	if (port->open_count <= 0)
 		return;
@@ -1572,6 +1587,14 @@ static void ftdi_read_bulk_callback (struct urb *urb, struct pt_regs *regs)
 	}
 
 	priv = usb_get_serial_port_data(port);
+	if (!priv) {
+		dbg("%s - bad port private data pointer - exiting", __FUNCTION__);
+		return;
+	}
+
+	if (urb != port->read_urb) {
+		err("%s - Not my urb!", __FUNCTION__);
+	}
 
 	if (urb->status) {
 		/* This will happen at close every time so it is a dbg not an err */
@@ -1579,6 +1602,59 @@ static void ftdi_read_bulk_callback (struct urb *urb, struct pt_regs *regs)
 		return;
 	}
 
+	/* If throttled, delay receive processing until unthrottled. */
+	spin_lock(&priv->rx_lock);
+	if (priv->rx_flags & THROTTLED) {
+		dbg("Deferring read urb processing until unthrottled");
+		priv->rx_flags |= ACTUALLY_THROTTLED;
+		spin_unlock(&priv->rx_lock);
+		return;
+	}
+	spin_unlock(&priv->rx_lock);
+
+	ftdi_process_read(port);
+
+} /* ftdi_read_bulk_callback */
+
+
+static void ftdi_process_read (struct usb_serial_port *port)
+{ /* ftdi_process_read */
+	struct urb *urb;
+	struct tty_struct *tty;
+	struct ftdi_private *priv;
+	char error_flag;
+       	unsigned char *data;
+
+	int i;
+	int result;
+	int need_flip;
+	int packet_offset;
+
+	dbg("%s - port %d", __FUNCTION__, port->number);
+
+	if (port->open_count <= 0)
+		return;
+
+	tty = port->tty;
+	if (!tty) {
+		dbg("%s - bad tty pointer - exiting",__FUNCTION__);
+		return;
+	}
+
+	priv = usb_get_serial_port_data(port);
+	if (!priv) {
+		dbg("%s - bad port private data pointer - exiting", __FUNCTION__);
+		return;
+	}
+
+	urb = port->read_urb;
+	if (!urb) {
+		dbg("%s - bad read_urb pointer - exiting", __FUNCTION__);
+		return;
+	}
+
+	data = urb->transfer_buffer;
+
         /* The first two bytes of every read packet are status */
 	if (urb->actual_length > 2) {
 		usb_serial_debug_data (__FILE__, __FUNCTION__, urb->actual_length, data);
@@ -1683,7 +1759,7 @@ static void ftdi_read_bulk_callback (struct urb *urb, struct pt_regs *regs)
 	}
 
 	return;
-} /* ftdi_read_bulk_callback */
+} /* ftdi_process_read */
 
 
 static void ftdi_break_ctl( struct usb_serial_port *port, int break_state )
@@ -2073,27 +2149,32 @@ static int ftdi_ioctl (struct usb_serial_port *port, struct file * file, unsigne
 
 static void ftdi_throttle (struct usb_serial_port *port)
 {
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+
 	dbg("%s - port %d", __FUNCTION__, port->number);
-	usb_unlink_urb (port->read_urb);
+
+	spin_lock_irqsave(&priv->rx_lock, flags);
+	priv->rx_flags |= THROTTLED;
+	spin_unlock_irqrestore(&priv->rx_lock, flags);
 }
 
 
 static void ftdi_unthrottle (struct usb_serial_port *port)
 {
-	int result;
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	int actually_throttled;
+	unsigned long flags;
 
 	dbg("%s - port %d", __FUNCTION__, port->number);
 
-	port->read_urb->dev = port->serial->dev;
+	spin_lock_irqsave(&priv->rx_lock, flags);
+	actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
+	priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
+	spin_unlock_irqrestore(&priv->rx_lock, flags);
 
-	usb_fill_bulk_urb(port->read_urb, port->serial->dev, 
-		      usb_rcvbulkpipe(port->serial->dev, port->bulk_in_endpointAddress),
-		      port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length,
-		      ftdi_read_bulk_callback, port);
-
-	result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
-	if (result)
-		err("%s - failed submitting read urb, error %d", __FUNCTION__, result);
+	if (actually_throttled)
+		ftdi_process_read(port);
 }
 
 static int __init ftdi_init (void)

drivers/usb/serial/kobil_sct.c

@@ -21,6 +21,9 @@
  * Supported readers: USB TWIN, KAAN Standard Plus and SecOVID Reader Plus
  * (Adapter K), B1 Professional and KAAN Professional (Adapter B)
  * 
+ * (21/05/2004) tw
+ *      Fix bug with P'n'P readers
+ *
  * (28/05/2003) tw
  *      Add support for KAAN SIM
  *
@@ -59,7 +62,7 @@
 #include "usb-serial.h"
 
 /* Version Information */
-#define DRIVER_VERSION "28/05/2003"
+#define DRIVER_VERSION "21/05/2004"
 #define DRIVER_AUTHOR "KOBIL Systems GmbH - http://www.kobil.com"
 #define DRIVER_DESC "KOBIL USB Smart Card Terminal Driver (experimental)"
 
@@ -339,6 +342,12 @@ static int kobil_open (struct usb_serial_port *port, struct file *filp)
 			);
 		dbg("%s - port %d Send reset_all_queues URB returns: %i", __FUNCTION__, port->number, result);
 	}
+	if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID || priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID ||
+	    priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID) {
+		// start reading (Adapter B 'cause PNP string)
+		result = usb_submit_urb( port->interrupt_in_urb, GFP_ATOMIC  ); 
+		dbg("%s - port %d Send read URB returns: %i", __FUNCTION__, port->number, result);
+	}
 
 	kfree(transfer_buffer);
 	return 0;
@@ -456,6 +465,11 @@ static int kobil_write (struct usb_serial_port *port, int from_user,
 	if ( ((priv->device_type != KOBIL_ADAPTER_B_PRODUCT_ID) && (priv->filled > 2) && (priv->filled >= (priv->buf[1] + 3))) || 
 	     ((priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID) && (priv->filled > 3) && (priv->filled >= (priv->buf[2] + 4))) ) {
 		
+		// stop reading (except TWIN and KAAN SIM)
+		if ( (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID) || (priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) ) {
+			usb_unlink_urb( port->interrupt_in_urb );
+		}
+
 		todo = priv->filled - priv->cur_pos;
 
 		while(todo > 0) {
@@ -463,25 +477,23 @@ static int kobil_write (struct usb_serial_port *port, int from_user,
 			length = (todo < 8) ? todo : 8;
 			// copy data to transfer buffer
 			memcpy(port->write_urb->transfer_buffer, priv->buf + priv->cur_pos, length );
-			
-			usb_fill_bulk_urb( port->write_urb,
+			usb_fill_int_urb( port->write_urb,
 					  port->serial->dev,
-					   usb_sndbulkpipe( port->serial->dev, priv->write_int_endpoint_address),
+					  usb_sndintpipe(port->serial->dev, priv->write_int_endpoint_address),
 					  port->write_urb->transfer_buffer,
 					  length,
 					  kobil_write_callback,
-					   port
+					  port,
+					  8
 				);
 
 			priv->cur_pos = priv->cur_pos + length;
-			result = usb_submit_urb( port->write_urb, GFP_ATOMIC );
+			result = usb_submit_urb( port->write_urb, GFP_NOIO );
 			dbg("%s - port %d Send write URB returns: %i", __FUNCTION__, port->number, result);
 			todo = priv->filled - priv->cur_pos;
 
 			if (todo > 0) {
-				//mdelay(16);
-				set_current_state(TASK_UNINTERRUPTIBLE);
-				schedule_timeout(24 * HZ / 1000);
+				msleep(24);
 			}
 
 		} // end while
@@ -492,10 +504,15 @@ static int kobil_write (struct usb_serial_port *port, int from_user,
 		// someone sets the dev to 0 if the close method has been called
 		port->interrupt_in_urb->dev = port->serial->dev;
 		
-		// start reading
-		result = usb_submit_urb( port->interrupt_in_urb, GFP_ATOMIC ); 
+		// start reading (except TWIN and KAAN SIM)
+		if ( (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID) || (priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) ) {
+			// someone sets the dev to 0 if the close method has been called
+			port->interrupt_in_urb->dev = port->serial->dev;
+			
+			result = usb_submit_urb( port->interrupt_in_urb, GFP_NOIO ); 
 			dbg("%s - port %d Send read URB returns: %i", __FUNCTION__, port->number, result);
 		}
+	}
 	return count;
 }
 

drivers/usb/serial/visor.c

@@ -680,7 +680,7 @@ static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_i
 	char *string;
 	int retval = 0;
 	int i;
-	int num_ports;
+	int num_ports = 0;
 
 	dbg("%s", __FUNCTION__);
 
@@ -703,15 +703,11 @@ static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_i
 		goto exit;
 	}
 
+	if (retval == sizeof(*connection_info)) {
 	        connection_info = (struct visor_connection_info *)transfer_buffer;
 
 		le16_to_cpus(&connection_info->num_ports);
 		num_ports = connection_info->num_ports;
-	/* handle devices that report invalid stuff here */
-	if (num_ports > 2)
-		num_ports = 2;
-	dev_info(dev, "%s: Number of ports: %d\n", serial->type->name,
-		connection_info->num_ports);
 
 		for (i = 0; i < num_ports; ++i) {
 			switch (connection_info->connections[i].port_function_id) {
@@ -734,9 +730,22 @@ static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_i
 					string = "unknown";
 					break;
 			}
-		dev_info(dev, "%s: port %d, is for %s use\n", serial->type->name,
+			dev_info(dev, "%s: port %d, is for %s use\n",
+				serial->type->name,
 				connection_info->connections[i].port, string);
 		}
+	}
+	/*
+	* Handle devices that report invalid stuff here.
+	*/
+	if (num_ports == 0 || num_ports > 2) {
+		dev_warn (dev, "%s: No valid connect info available\n",
+			serial->type->name);
+		num_ports = 2;
+	}
+  
+	dev_info(dev, "%s: Number of ports: %d\n", serial->type->name,
+		num_ports);
 
 	/*
 	 * save off our num_ports info so that we can use it in the
@@ -868,8 +877,7 @@ static int clie_3_5_startup (struct usb_serial *serial)
  
 static int treo_attach (struct usb_serial *serial)
 {
-	struct usb_serial_port *port;
-	int i;
+	struct usb_serial_port *swap_port;
 
 	/* Only do this endpoint hack for the Handspring devices with
 	 * interrupt in endpoints, which for now are the Treo devices. */
@@ -879,31 +887,28 @@ static int treo_attach (struct usb_serial *serial)
 
 	dbg("%s", __FUNCTION__);
 
-	/* Ok, this is pretty ugly, but these devices want to use the
-	 * interrupt endpoint as paired up with a bulk endpoint for a
-	 * "virtual serial port".  So let's force the endpoints to be
-	 * where we want them to be. */
-	for (i = serial->num_bulk_in; i < serial->num_ports; ++i) {
-		port = serial->port[i];
-		port->read_urb = serial->port[0]->read_urb;
-		port->bulk_in_endpointAddress = serial->port[0]->bulk_in_endpointAddress;
-		port->bulk_in_buffer = serial->port[0]->bulk_in_buffer;
-	}
-
-	for (i = serial->num_bulk_out; i < serial->num_ports; ++i) {
-		port = serial->port[i];
-		port->write_urb = serial->port[0]->write_urb;
-		port->bulk_out_size = serial->port[0]->bulk_out_size;
-		port->bulk_out_endpointAddress = serial->port[0]->bulk_out_endpointAddress;
-		port->bulk_out_buffer = serial->port[0]->bulk_out_buffer;
-	}
-
-	for (i = serial->num_interrupt_in; i < serial->num_ports; ++i) {
-		port = serial->port[i];
-		port->interrupt_in_urb = serial->port[0]->interrupt_in_urb;
-		port->interrupt_in_endpointAddress = serial->port[0]->interrupt_in_endpointAddress;
-		port->interrupt_in_buffer = serial->port[0]->interrupt_in_buffer;
-	}
+	/*
+	* It appears that Treos want to use the 1st interrupt endpoint to
+	* communicate with the 2nd bulk out endpoint, so let's swap the 1st
+	* and 2nd bulk in and interrupt endpoints.  Note that swapping the
+	* bulk out endpoints would break lots of apps that want to communicate
+	* on the second port.
+	*/
+#define COPY_PORT(dest, src)						\
+	dest->read_urb = src->read_urb;					\
+	dest->bulk_in_endpointAddress = src->bulk_in_endpointAddress;	\
+	dest->bulk_in_buffer = src->bulk_in_buffer;			\
+	dest->interrupt_in_urb = src->interrupt_in_urb;			\
+	dest->interrupt_in_endpointAddress = src->interrupt_in_endpointAddress;	\
+	dest->interrupt_in_buffer = src->interrupt_in_buffer;
+
+	swap_port = kmalloc(sizeof(*swap_port), GFP_KERNEL);
+	if (!swap_port)
+		return -ENOMEM;
+	COPY_PORT(swap_port, serial->port[0]);
+	COPY_PORT(serial->port[0], serial->port[1]);
+	COPY_PORT(serial->port[1], swap_port);
+	kfree(swap_port);
 
 	return 0;
 }

drivers/usb/storage/transport.c

@@ -1112,8 +1112,7 @@ static int usb_stor_reset_common(struct us_data *us,
 
 	/* long wait for reset, so unlock to allow disconnects */
 	up(&us->dev_semaphore);
-	set_current_state(TASK_UNINTERRUPTIBLE);
-	schedule_timeout(HZ*6);
+	msleep(6000);
 	down(&us->dev_semaphore);
 	if (test_bit(US_FLIDX_DISCONNECTING, &us->flags)) {
 		US_DEBUGP("Reset interrupted by disconnect\n");

fs/sysfs/dir.c

@@ -10,6 +10,8 @@
 #include <linux/kobject.h>
 #include "sysfs.h"
 
+DECLARE_RWSEM(sysfs_rename_sem);
+
 static int init_dir(struct inode * inode)
 {
 	inode->i_op = &simple_dir_inode_operations;
@@ -134,8 +136,14 @@ void sysfs_remove_dir(struct kobject * kobj)
 			/**
 			 * Unlink and unhash.
 			 */
+			__d_drop(d);
 			spin_unlock(&dcache_lock);
-			d_delete(d);
+			/* release the target kobject in case of 
+			 * a symlink
+			 */
+			if (S_ISLNK(d->d_inode->i_mode))
+				kobject_put(d->d_fsdata);
+			
 			simple_unlink(dentry->d_inode,d);
 			dput(d);
 			pr_debug(" done\n");
@@ -165,6 +173,7 @@ int sysfs_rename_dir(struct kobject * kobj, const char *new_name)
 	if (!kobj->parent)
 		return -EINVAL;
 
+	down_write(&sysfs_rename_sem);
 	parent = kobj->parent->dentry;
 
 	down(&parent->d_inode->i_sem);
@@ -179,6 +188,7 @@ int sysfs_rename_dir(struct kobject * kobj, const char *new_name)
 		dput(new_dentry);
 	}
 	up(&parent->d_inode->i_sem);	
+	up_write(&sysfs_rename_sem);
 
 	return error;
 }

fs/sysfs/inode.c

@@ -96,7 +96,12 @@ void sysfs_hash_and_remove(struct dentry * dir, const char * name)
 			pr_debug("sysfs: Removing %s (%d)\n", victim->d_name.name,
 				 atomic_read(&victim->d_count));
 
-			d_delete(victim);
+			d_drop(victim);
+			/* release the target kobject in case of 
+			 * a symlink
+			 */
+			if (S_ISLNK(victim->d_inode->i_mode))
+				kobject_put(victim->d_fsdata);
 			simple_unlink(dir->d_inode,victim);
 		}
 		/*

fs/sysfs/symlink.c

@@ -8,27 +8,17 @@
 
 #include "sysfs.h"
 
+static struct inode_operations sysfs_symlink_inode_operations = {
+	.readlink = sysfs_readlink,
+	.follow_link = sysfs_follow_link,
+};
 
 static int init_symlink(struct inode * inode)
 {
-	inode->i_op = &page_symlink_inode_operations;
+	inode->i_op = &sysfs_symlink_inode_operations;
 	return 0;
 }
 
-static int sysfs_symlink(struct inode * dir, struct dentry *dentry, const char * symname)
-{
-	int error;
-
-	error = sysfs_create(dentry, S_IFLNK|S_IRWXUGO, init_symlink);
-	if (!error) {
-		int l = strlen(symname)+1;
-		error = page_symlink(dentry->d_inode, symname, l);
-		if (error)
-			iput(dentry->d_inode);
-	}
-	return error;
-}
-
 static int object_depth(struct kobject * kobj)
 {
 	struct kobject * p = kobj;
@@ -74,37 +64,20 @@ int sysfs_create_link(struct kobject * kobj, struct kobject * target, char * nam
 	struct dentry * dentry = kobj->dentry;
 	struct dentry * d;
 	int error = 0;
-	int size;
-	int depth;
-	char * path;
-	char * s;
-
-	depth = object_depth(kobj);
-	size = object_path_length(target) + depth * 3 - 1;
-	if (size > PATH_MAX)
-		return -ENAMETOOLONG;
-	pr_debug("%s: depth = %d, size = %d\n",__FUNCTION__,depth,size);
-
-	path = kmalloc(size,GFP_KERNEL);
-	if (!path)
-		return -ENOMEM;
-	memset(path,0,size);
-
-	for (s = path; depth--; s += 3)
-		strcpy(s,"../");
-
-	fill_object_path(target,path,size);
-	pr_debug("%s: path = '%s'\n",__FUNCTION__,path);
 
 	down(&dentry->d_inode->i_sem);
 	d = sysfs_get_dentry(dentry,name);
-	if (!IS_ERR(d))
-		error = sysfs_symlink(dentry->d_inode,d,path);
-	else
-		error = PTR_ERR(d);
+	if (!IS_ERR(d)) {
+		error = sysfs_create(d, S_IFLNK|S_IRWXUGO, init_symlink);
+		if (!error)
+			/* 
+			 * associate the link dentry with the target kobject 
+			 */
+			d->d_fsdata = kobject_get(target);
 		dput(d);
+	} else 
+		error = PTR_ERR(d);
 	up(&dentry->d_inode->i_sem);
-	kfree(path);
 	return error;
 }
 
@@ -120,6 +93,86 @@ void sysfs_remove_link(struct kobject * kobj, char * name)
 	sysfs_hash_and_remove(kobj->dentry,name);
 }
 
+static int sysfs_get_target_path(struct kobject * kobj, struct kobject * target,
+				   char *path)
+{
+	char * s;
+	int depth, size;
+
+	depth = object_depth(kobj);
+	size = object_path_length(target) + depth * 3 - 1;
+	if (size > PATH_MAX)
+		return -ENAMETOOLONG;
+
+	pr_debug("%s: depth = %d, size = %d\n", __FUNCTION__, depth, size);
+
+	for (s = path; depth--; s += 3)
+		strcpy(s,"../");
+
+	fill_object_path(target, path, size);
+	pr_debug("%s: path = '%s'\n", __FUNCTION__, path);
+
+	return 0;
+}
+
+static int sysfs_getlink(struct dentry *dentry, char * path)
+{
+	struct kobject *kobj, *target_kobj;
+	int error = 0;
+
+	kobj = sysfs_get_kobject(dentry->d_parent);
+	if (!kobj)
+		return -EINVAL;
+
+	target_kobj = sysfs_get_kobject(dentry);
+	if (!target_kobj) {
+		kobject_put(kobj);
+		return -EINVAL;
+	}
+
+	down_read(&sysfs_rename_sem);
+	error = sysfs_get_target_path(kobj, target_kobj, path);
+	up_read(&sysfs_rename_sem);
+	
+	kobject_put(kobj);
+	kobject_put(target_kobj);
+	return error;
+
+}
+
+int sysfs_readlink(struct dentry *dentry, char __user *buffer, int buflen)
+{
+	int error = 0;
+	unsigned long page = get_zeroed_page(GFP_KERNEL);
+
+	if (!page)
+		return -ENOMEM;
+
+	error = sysfs_getlink(dentry, (char *) page);
+	if (!error)
+	        error = vfs_readlink(dentry, buffer, buflen, (char *) page);
+
+	free_page(page);
+
+	return error;
+}
+
+int sysfs_follow_link(struct dentry *dentry, struct nameidata *nd)
+{
+	int error = 0;
+	unsigned long page = get_zeroed_page(GFP_KERNEL);
+
+	if (!page)
+		return -ENOMEM;
+
+	error = sysfs_getlink(dentry, (char *) page); 
+	if (!error)
+	        error = vfs_follow_link(nd, (char *) page);
+
+	free_page(page);
+
+	return error;
+}
 
 EXPORT_SYMBOL(sysfs_create_link);
 EXPORT_SYMBOL(sysfs_remove_link);

fs/sysfs/sysfs.h

@@ -12,15 +12,18 @@ extern void sysfs_hash_and_remove(struct dentry * dir, const char * name);
 extern int sysfs_create_subdir(struct kobject *, const char *, struct dentry **);
 extern void sysfs_remove_subdir(struct dentry *);
 
+extern int sysfs_readlink(struct dentry *, char __user *, int );
+extern int sysfs_follow_link(struct dentry *, struct nameidata *);
+extern struct rw_semaphore sysfs_rename_sem;
 
 static inline struct kobject *sysfs_get_kobject(struct dentry *dentry)
 {
 	struct kobject * kobj = NULL;
 
-	spin_lock(&dentry->d_lock);
+	spin_lock(&dcache_lock);
 	if (!d_unhashed(dentry))
 		kobj = kobject_get(dentry->d_fsdata);
-	spin_unlock(&dentry->d_lock);
+	spin_unlock(&dcache_lock);
 
 	return kobj;
 }

include/linux/pm.h

@@ -231,6 +231,7 @@ struct device;
 struct dev_pm_info {
 	u32			power_state;
 #ifdef	CONFIG_PM
+	u32			prev_state;
 	u8			* saved_state;
 	atomic_t		pm_users;
 	struct device		* pm_parent;