Commit d4d5dc3d authored by Felix Fietkau's avatar Felix Fietkau Committed by John W. Linville

ath9k: do not limit the chainmask to 1 for legacy mode

Restricting the chainmask to 1 for legacy mode disables useful features
such as MRC, and it reduces the available transmit power.
I can't think of a good reason to do this in legacy mode, so let's just
get rid of that code.
Signed-off-by: default avatarFelix Fietkau <nbd@openwrt.org>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent f1a8abb0
......@@ -675,7 +675,6 @@ void ath9k_deinit_device(struct ath_softc *sc);
void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw);
void ath9k_update_ichannel(struct ath_softc *sc, struct ieee80211_hw *hw,
struct ath9k_channel *ichan);
void ath_update_chainmask(struct ath_softc *sc, int is_ht);
int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
struct ath9k_channel *hchan);
......
......@@ -538,32 +538,6 @@ void ath_ani_calibrate(unsigned long data)
}
}
/*
* Update tx/rx chainmask. For legacy association,
* hard code chainmask to 1x1, for 11n association, use
* the chainmask configuration, for bt coexistence, use
* the chainmask configuration even in legacy mode.
*/
void ath_update_chainmask(struct ath_softc *sc, int is_ht)
{
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
if ((sc->sc_flags & SC_OP_OFFCHANNEL) || is_ht ||
(ah->btcoex_hw.scheme != ATH_BTCOEX_CFG_NONE)) {
common->tx_chainmask = ah->caps.tx_chainmask;
common->rx_chainmask = ah->caps.rx_chainmask;
} else {
common->tx_chainmask = 1;
common->rx_chainmask = 1;
}
ath_dbg(common, ATH_DBG_CONFIG,
"tx chmask: %d, rx chmask: %d\n",
common->tx_chainmask,
common->rx_chainmask);
}
static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta)
{
struct ath_node *an;
......@@ -1679,8 +1653,6 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
/* XXX: remove me eventualy */
ath9k_update_ichannel(sc, hw, &sc->sc_ah->channels[pos]);
ath_update_chainmask(sc, conf_is_ht(conf));
/* update survey stats for the old channel before switching */
spin_lock_irqsave(&common->cc_lock, flags);
ath_update_survey_stats(sc);
......@@ -1912,10 +1884,6 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
/* Set aggregation protection mode parameters */
sc->config.ath_aggr_prot = 0;
/* Only legacy IBSS for now */
if (vif->type == NL80211_IFTYPE_ADHOC)
ath_update_chainmask(sc, 0);
ath_dbg(common, ATH_DBG_CONFIG, "BSSID: %pM aid: 0x%x\n",
common->curbssid, common->curaid);
......
......@@ -288,7 +288,6 @@ void ath9k_wiphy_chan_work(struct work_struct *work)
/* sync hw configuration for hw code */
common->hw = aphy->hw;
ath_update_chainmask(sc, sc->chan_is_ht);
if (ath_set_channel(sc, aphy->hw,
&sc->sc_ah->channels[sc->chan_idx]) < 0) {
printk(KERN_DEBUG "ath9k: Failed to set channel for new "
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment