Merge branch 'sh_eth'

Sergei Shtylyov says:

====================
Beautify 'sh_eth' driver's messages

This patchset converts te driver to using netdev_*() and netif_*() to print out
its messages whenever possible.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/renesas/sh_eth.c

@@ -400,7 +400,8 @@ static void sh_eth_select_mii(struct net_device *ndev)
 		value = 0x0;
 		break;
 	default:
-		pr_warn("PHY interface mode was not setup. Set to MII.\n");
+		netdev_warn(ndev,
+			    "PHY interface mode was not setup. Set to MII.\n");
 		value = 0x1;
 		break;
 	}
@@ -854,7 +855,7 @@ static int sh_eth_check_reset(struct net_device *ndev)
 		cnt--;
 	}
 	if (cnt <= 0) {
-		pr_err("Device reset failed\n");
+		netdev_err(ndev, "Device reset failed\n");
 		ret = -ETIMEDOUT;
 	}
 	return ret;
@@ -1556,8 +1557,7 @@ static void sh_eth_error(struct net_device *ndev, int intr_status)
 		/* Unused write back interrupt */
 		if (intr_status & EESR_TABT) {	/* Transmit Abort int */
 			ndev->stats.tx_aborted_errors++;
-			if (netif_msg_tx_err(mdp))
-				dev_err(&ndev->dev, "Transmit Abort\n");
+			netif_err(mdp, tx_err, ndev, "Transmit Abort\n");
 		}
 	}
 
@@ -1566,45 +1566,38 @@ static void sh_eth_error(struct net_device *ndev, int intr_status)
 		if (intr_status & EESR_RFRMER) {
 			/* Receive Frame Overflow int */
 			ndev->stats.rx_frame_errors++;
-			if (netif_msg_rx_err(mdp))
-				dev_err(&ndev->dev, "Receive Abort\n");
+			netif_err(mdp, rx_err, ndev, "Receive Abort\n");
 		}
 	}
 
 	if (intr_status & EESR_TDE) {
 		/* Transmit Descriptor Empty int */
 		ndev->stats.tx_fifo_errors++;
-		if (netif_msg_tx_err(mdp))
-			dev_err(&ndev->dev, "Transmit Descriptor Empty\n");
+		netif_err(mdp, tx_err, ndev, "Transmit Descriptor Empty\n");
 	}
 
 	if (intr_status & EESR_TFE) {
 		/* FIFO under flow */
 		ndev->stats.tx_fifo_errors++;
-		if (netif_msg_tx_err(mdp))
-			dev_err(&ndev->dev, "Transmit FIFO Under flow\n");
+		netif_err(mdp, tx_err, ndev, "Transmit FIFO Under flow\n");
 	}
 
 	if (intr_status & EESR_RDE) {
 		/* Receive Descriptor Empty int */
 		ndev->stats.rx_over_errors++;
-
-		if (netif_msg_rx_err(mdp))
-			dev_err(&ndev->dev, "Receive Descriptor Empty\n");
+		netif_err(mdp, rx_err, ndev, "Receive Descriptor Empty\n");
 	}
 
 	if (intr_status & EESR_RFE) {
 		/* Receive FIFO Overflow int */
 		ndev->stats.rx_fifo_errors++;
-		if (netif_msg_rx_err(mdp))
-			dev_err(&ndev->dev, "Receive FIFO Overflow\n");
+		netif_err(mdp, rx_err, ndev, "Receive FIFO Overflow\n");
 	}
 
 	if (!mdp->cd->no_ade && (intr_status & EESR_ADE)) {
 		/* Address Error */
 		ndev->stats.tx_fifo_errors++;
-		if (netif_msg_tx_err(mdp))
-			dev_err(&ndev->dev, "Address Error\n");
+		netif_err(mdp, tx_err, ndev, "Address Error\n");
 	}
 
 	mask = EESR_TWB | EESR_TABT | EESR_ADE | EESR_TDE | EESR_TFE;
@@ -1615,7 +1608,7 @@ static void sh_eth_error(struct net_device *ndev, int intr_status)
 		u32 edtrr = sh_eth_read(ndev, EDTRR);
 
 		/* dmesg */
-		dev_err(&ndev->dev, "TX error. status=%8.8x cur_tx=%8.8x dirty_tx=%8.8x state=%8.8x EDTRR=%8.8x.\n",
+		netdev_err(ndev, "TX error. status=%8.8x cur_tx=%8.8x dirty_tx=%8.8x state=%8.8x EDTRR=%8.8x.\n",
 			   intr_status, mdp->cur_tx, mdp->dirty_tx,
 			   (u32)ndev->state, edtrr);
 		/* dirty buffer free */
@@ -1662,7 +1655,7 @@ static irqreturn_t sh_eth_interrupt(int irq, void *netdev)
 				     EESIPR);
 			__napi_schedule(&mdp->napi);
 		} else {
-			dev_warn(&ndev->dev,
+			netdev_warn(ndev,
 				    "ignoring interrupt, status 0x%08lx, mask 0x%08lx.\n",
 				    intr_status, intr_enable);
 		}
@@ -1793,11 +1786,11 @@ static int sh_eth_phy_init(struct net_device *ndev)
 	}
 
 	if (IS_ERR(phydev)) {
-		dev_err(&ndev->dev, "failed to connect PHY\n");
+		netdev_err(ndev, "failed to connect PHY\n");
 		return PTR_ERR(phydev);
 	}
 
-	dev_info(&ndev->dev, "attached PHY %d (IRQ %d) to driver %s\n",
+	netdev_info(ndev, "attached PHY %d (IRQ %d) to driver %s\n",
 		    phydev->addr, phydev->irq, phydev->drv->name);
 
 	mdp->phydev = phydev;
@@ -1979,12 +1972,12 @@ static int sh_eth_set_ringparam(struct net_device *ndev,
 
 	ret = sh_eth_ring_init(ndev);
 	if (ret < 0) {
-		dev_err(&ndev->dev, "%s: sh_eth_ring_init failed.\n", __func__);
+		netdev_err(ndev, "%s: sh_eth_ring_init failed.\n", __func__);
 		return ret;
 	}
 	ret = sh_eth_dev_init(ndev, false);
 	if (ret < 0) {
-		dev_err(&ndev->dev, "%s: sh_eth_dev_init failed.\n", __func__);
+		netdev_err(ndev, "%s: sh_eth_dev_init failed.\n", __func__);
 		return ret;
 	}
 
@@ -2025,7 +2018,7 @@ static int sh_eth_open(struct net_device *ndev)
 	ret = request_irq(ndev->irq, sh_eth_interrupt,
 			  mdp->cd->irq_flags, ndev->name, ndev);
 	if (ret) {
-		dev_err(&ndev->dev, "Can not assign IRQ number\n");
+		netdev_err(ndev, "Can not assign IRQ number\n");
 		goto out_napi_off;
 	}
 
@@ -2063,10 +2056,9 @@ static void sh_eth_tx_timeout(struct net_device *ndev)
 
 	netif_stop_queue(ndev);
 
-	if (netif_msg_timer(mdp)) {
-		dev_err(&ndev->dev, "%s: transmit timed out, status %8.8x, resetting...\n",
-			ndev->name, (int)sh_eth_read(ndev, EESR));
-	}
+	netif_err(mdp, timer, ndev,
+		  "transmit timed out, status %8.8x, resetting...\n",
+		  (int)sh_eth_read(ndev, EESR));
 
 	/* tx_errors count up */
 	ndev->stats.tx_errors++;
@@ -2101,8 +2093,7 @@ static int sh_eth_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 	spin_lock_irqsave(&mdp->lock, flags);
 	if ((mdp->cur_tx - mdp->dirty_tx) >= (mdp->num_tx_ring - 4)) {
 		if (!sh_eth_txfree(ndev)) {
-			if (netif_msg_tx_queued(mdp))
-				dev_warn(&ndev->dev, "TxFD exhausted.\n");
+			netif_warn(mdp, tx_queued, ndev, "TxFD exhausted.\n");
 			netif_stop_queue(ndev);
 			spin_unlock_irqrestore(&mdp->lock, flags);
 			return NETDEV_TX_BUSY;
@@ -2272,7 +2263,7 @@ static int sh_eth_tsu_busy(struct net_device *ndev)
 		udelay(10);
 		timeout--;
 		if (timeout <= 0) {
-			dev_err(&ndev->dev, "%s: timeout\n", __func__);
+			netdev_err(ndev, "%s: timeout\n", __func__);
 			return -ETIMEDOUT;
 		}
 	}
@@ -2924,7 +2915,7 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
 	}
 
 	/* print device information */
-	pr_info("Base address at 0x%x, %pM, IRQ %d.\n",
+	netdev_info(ndev, "Base address at 0x%x, %pM, IRQ %d.\n",
 		    (u32)ndev->base_addr, ndev->dev_addr, ndev->irq);
 
 	platform_set_drvdata(pdev, ndev);