Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (37 commits)
  MIPS: O32: Provide definition of registers ta0 .. ta3.
  MIPS: perf: Add Octeon support for hardware perf.
  MIPS: perf: Add support for 64-bit perf counters.
  MIPS: perf: Reorganize contents of perf support files.
  MIPS: perf: Cleanup formatting in arch/mips/kernel/perf_event.c
  MIPS: Add accessor macros for 64-bit performance counter registers.
  MIPS: Add probes for more Octeon II CPUs.
  MIPS: Add more CPU identifiers for Octeon II CPUs.
  MIPS: XLR, XLS: Add comment for smp setup
  MIPS: JZ4740: GPIO: Check correct IRQ in demux handler
  MIPS: JZ4740: GPIO: Simplify IRQ demuxer
  MIPS: JZ4740: Use generic irq chip
  MIPS: Alchemy: remove all CONFIG_SOC_AU1??? defines
  MIPS: Alchemy: kill au1xxx.h header
  MIPS: Alchemy: clean DMA code of CONFIG_SOC_AU1??? defines
  MIPS, IDE: Alchem, au1xxx-ide: Remove pb1200/db1200 header dep
  MIPS: Alchemy: Redo PCI as platform driver
  MIPS: Alchemy: more base address cleanup
  MIPS: Alchemy: rewrite USB platform setup.
  MIPS: Alchemy: abstract USB block control register access
  ...

Fix up trivial conflicts in:
	arch/mips/alchemy/devboards/db1x00/platform.c
	drivers/ide/Kconfig
	drivers/mmc/host/au1xmmc.c
	drivers/video/Kconfig
	sound/mips/Kconfig

arch/mips/Kconfig

@@ -47,6 +47,8 @@ config MIPS_ALCHEMY
 	select GENERIC_GPIO
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select SYS_SUPPORTS_ZBOOT
+	select USB_ARCH_HAS_OHCI
+	select USB_ARCH_HAS_EHCI
 
 config AR7
 	bool "Texas Instruments AR7"
@@ -206,6 +208,7 @@ config MACH_JZ4740
 	select SYS_HAS_EARLY_PRINTK
 	select HAVE_PWM
 	select HAVE_CLK
+	select GENERIC_IRQ_CHIP
 
 config LANTIQ
 	bool "Lantiq based platforms"
@@ -2092,7 +2095,7 @@ config NODES_SHIFT
 
 config HW_PERF_EVENTS
 	bool "Enable hardware performance counter support for perf events"
-	depends on PERF_EVENTS && !MIPS_MT_SMTC && OPROFILE=n && CPU_MIPS32
+	depends on PERF_EVENTS && !MIPS_MT_SMTC && OPROFILE=n && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON)
 	default y
 	help
 	  Enable hardware performance counter support for perf events. If

arch/mips/Makefile

@@ -226,7 +226,7 @@ LDFLAGS			+= -m $(ld-emul)
 ifdef CONFIG_MIPS
 CHECKFLAGS += $(shell $(CC) $(KBUILD_CFLAGS) -dM -E -xc /dev/null | \
 	egrep -vw '__GNUC_(|MINOR_|PATCHLEVEL_)_' | \
-	sed -e 's/^\#define /-D/' -e "s/ /='/" -e "s/$$/'/")
+	sed -e "s/^\#define /-D'/" -e "s/ /'='/" -e "s/$$/'/")
 ifdef CONFIG_64BIT
 CHECKFLAGS		+= -m64
 endif
@@ -295,7 +295,9 @@ endif
 
 install:
 	$(Q)install -D -m 755 vmlinux $(INSTALL_PATH)/vmlinux-$(KERNELRELEASE)
+ifdef CONFIG_SYS_SUPPORTS_ZBOOT
 	$(Q)install -D -m 755 vmlinuz $(INSTALL_PATH)/vmlinuz-$(KERNELRELEASE)
+endif
 	$(Q)install -D -m 644 .config $(INSTALL_PATH)/config-$(KERNELRELEASE)
 	$(Q)install -D -m 644 System.map $(INSTALL_PATH)/System.map-$(KERNELRELEASE)
 

arch/mips/alchemy/Kconfig

@@ -18,20 +18,20 @@ config MIPS_MTX1
 	bool "4G Systems MTX-1 board"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
-	select SOC_AU1500
+	select ALCHEMY_GPIOINT_AU1000
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_BOSPORUS
 	bool "Alchemy Bosporus board"
-	select SOC_AU1500
+	select ALCHEMY_GPIOINT_AU1000
 	select DMA_NONCOHERENT
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_DB1000
 	bool "Alchemy DB1000 board"
-	select SOC_AU1000
+	select ALCHEMY_GPIOINT_AU1000
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -39,14 +39,14 @@ config MIPS_DB1000
 
 config MIPS_DB1100
 	bool "Alchemy DB1100 board"
-	select SOC_AU1100
+	select ALCHEMY_GPIOINT_AU1000
 	select DMA_NONCOHERENT
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_DB1200
 	bool "Alchemy DB1200 board"
-	select SOC_AU1200
+	select ALCHEMY_GPIOINT_AU1000
 	select DMA_COHERENT
 	select MIPS_DISABLE_OBSOLETE_IDE
 	select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -54,7 +54,7 @@ config MIPS_DB1200
 
 config MIPS_DB1500
 	bool "Alchemy DB1500 board"
-	select SOC_AU1500
+	select ALCHEMY_GPIOINT_AU1000
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select MIPS_DISABLE_OBSOLETE_IDE
@@ -64,7 +64,7 @@ config MIPS_DB1500
 
 config MIPS_DB1550
 	bool "Alchemy DB1550 board"
-	select SOC_AU1550
+	select ALCHEMY_GPIOINT_AU1000
 	select HW_HAS_PCI
 	select DMA_NONCOHERENT
 	select MIPS_DISABLE_OBSOLETE_IDE
@@ -74,13 +74,13 @@ config MIPS_DB1550
 config MIPS_MIRAGE
 	bool "Alchemy Mirage board"
 	select DMA_NONCOHERENT
-	select SOC_AU1500
+	select ALCHEMY_GPIOINT_AU1000
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_PB1000
 	bool "Alchemy PB1000 board"
-	select SOC_AU1000
+	select ALCHEMY_GPIOINT_AU1000
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select SWAP_IO_SPACE
@@ -89,7 +89,7 @@ config MIPS_PB1000
 
 config MIPS_PB1100
 	bool "Alchemy PB1100 board"
-	select SOC_AU1100
+	select ALCHEMY_GPIOINT_AU1000
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select SWAP_IO_SPACE
@@ -98,7 +98,7 @@ config MIPS_PB1100
 
 config MIPS_PB1200
 	bool "Alchemy PB1200 board"
-	select SOC_AU1200
+	select ALCHEMY_GPIOINT_AU1000
 	select DMA_NONCOHERENT
 	select MIPS_DISABLE_OBSOLETE_IDE
 	select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -106,7 +106,7 @@ config MIPS_PB1200
 
 config MIPS_PB1500
 	bool "Alchemy PB1500 board"
-	select SOC_AU1500
+	select ALCHEMY_GPIOINT_AU1000
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -114,7 +114,7 @@ config MIPS_PB1500
 
 config MIPS_PB1550
 	bool "Alchemy PB1550 board"
-	select SOC_AU1550
+	select ALCHEMY_GPIOINT_AU1000
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select MIPS_DISABLE_OBSOLETE_IDE
@@ -124,13 +124,13 @@ config MIPS_PB1550
 config MIPS_XXS1500
 	bool "MyCable XXS1500 board"
 	select DMA_NONCOHERENT
-	select SOC_AU1500
+	select ALCHEMY_GPIOINT_AU1000
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_GPR
 	bool "Trapeze ITS GPR board"
-	select SOC_AU1550
+	select ALCHEMY_GPIOINT_AU1000
 	select HW_HAS_PCI
 	select DMA_NONCOHERENT
 	select MIPS_DISABLE_OBSOLETE_IDE
@@ -138,23 +138,3 @@ config MIPS_GPR
 	select SYS_HAS_EARLY_PRINTK
 
 endchoice
-
-config SOC_AU1000
-	bool
-	select ALCHEMY_GPIOINT_AU1000
-
-config SOC_AU1100
-	bool
-	select ALCHEMY_GPIOINT_AU1000
-
-config SOC_AU1500
-	bool
-	select ALCHEMY_GPIOINT_AU1000
-
-config SOC_AU1550
-	bool
-	select ALCHEMY_GPIOINT_AU1000
-
-config SOC_AU1200
-	bool
-	select ALCHEMY_GPIOINT_AU1000

arch/mips/alchemy/common/Makefile

@@ -12,9 +12,5 @@ obj-$(CONFIG_ALCHEMY_GPIOINT_AU1000) += irq.o
 
 # optional gpiolib support
 ifeq ($(CONFIG_ALCHEMY_GPIO_INDIRECT),)
- ifeq ($(CONFIG_GPIOLIB),y)
-  obj-$(CONFIG_ALCHEMY_GPIOINT_AU1000) += gpiolib-au1000.o
- endif
+ obj-$(CONFIG_GPIOLIB) += gpiolib.o
 endif
-
-obj-$(CONFIG_PCI)		+= pci.o

arch/mips/alchemy/common/dma.c

@@ -40,8 +40,6 @@
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1000_dma.h>
 
-#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || \
-    defined(CONFIG_SOC_AU1100)
 /*
  * A note on resource allocation:
  *
@@ -88,12 +86,12 @@ static const struct dma_dev {
 	{ AU1000_AC97_PHYS_ADDR + 0x08, DMA_DW16 | DMA_DR },	/* AC97 RX c */
 	{ AU1000_UART3_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC },	/* UART3_TX */
 	{ AU1000_UART3_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* UART3_RX */
-	{ AU1000_USBD_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* EP0RD */
-	{ AU1000_USBD_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* EP0WR */
-	{ AU1000_USBD_PHYS_ADDR + 0x08, DMA_DW8 | DMA_NC }, /* EP2WR */
-	{ AU1000_USBD_PHYS_ADDR + 0x0c, DMA_DW8 | DMA_NC }, /* EP3WR */
-	{ AU1000_USBD_PHYS_ADDR + 0x10, DMA_DW8 | DMA_NC | DMA_DR }, /* EP4RD */
-	{ AU1000_USBD_PHYS_ADDR + 0x14, DMA_DW8 | DMA_NC | DMA_DR }, /* EP5RD */
+	{ AU1000_USB_UDC_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* EP0RD */
+	{ AU1000_USB_UDC_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* EP0WR */
+	{ AU1000_USB_UDC_PHYS_ADDR + 0x08, DMA_DW8 | DMA_NC }, /* EP2WR */
+	{ AU1000_USB_UDC_PHYS_ADDR + 0x0c, DMA_DW8 | DMA_NC }, /* EP3WR */
+	{ AU1000_USB_UDC_PHYS_ADDR + 0x10, DMA_DW8 | DMA_NC | DMA_DR }, /* EP4RD */
+	{ AU1000_USB_UDC_PHYS_ADDR + 0x14, DMA_DW8 | DMA_NC | DMA_DR }, /* EP5RD */
 	/* on Au1500, these 2 are DMA_REQ2/3 (GPIO208/209) instead! */
 	{ AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC},	/* I2S TX */
 	{ AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC | DMA_DR}, /* I2S RX */
@@ -170,13 +168,13 @@ int request_au1000_dma(int dev_id, const char *dev_str,
 	const struct dma_dev *dev;
 	int i, ret;
 
-#if defined(CONFIG_SOC_AU1100)
+	if (alchemy_get_cputype() == ALCHEMY_CPU_AU1100) {
 		if (dev_id < 0 || dev_id >= (DMA_NUM_DEV + DMA_NUM_DEV_BANK2))
 			return -EINVAL;
-#else
+	} else {
 		if (dev_id < 0 || dev_id >= DMA_NUM_DEV)
 			return -EINVAL;
-#endif
+	}
 
 	for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++)
 		if (au1000_dma_table[i].dev_id < 0)
@@ -264,5 +262,3 @@ static int __init au1000_dma_init(void)
 	return 0;
 }
 arch_initcall(au1000_dma_init);
-
-#endif /* AU1000 AU1500 AU1100 */

arch/mips/alchemy/common/gpiolib-au1000.c → arch/mips/alchemy/common/gpiolib.c

 /*
  *  Copyright (C) 2007-2009, OpenWrt.org, Florian Fainelli <florian@openwrt.org>
- *  	GPIOLIB support for Au1000, Au1500, Au1100, Au1550 and Au12x0.
+ *	GPIOLIB support for Alchemy chips.
  *
  *  This program is free software; you can redistribute	 it and/or modify it
  *  under  the terms of	 the GNU General  Public License as published by the
@@ -23,18 +23,18 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  *
  *  Notes :
+ *	This file must ONLY be built when CONFIG_GPIOLIB=y and
+ *	 CONFIG_ALCHEMY_GPIO_INDIRECT=n, otherwise compilation will fail!
  *	au1000 SoC have only one GPIO block : GPIO1
  *	Au1100, Au15x0, Au12x0 have a second one : GPIO2
  */
 
+#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/types.h>
-#include <linux/platform_device.h>
 #include <linux/gpio.h>
-
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-au1x00/gpio.h>
+#include <asm/mach-au1x00/gpio-au1000.h>
 
 static int gpio2_get(struct gpio_chip *chip, unsigned offset)
 {
@@ -115,12 +115,19 @@ struct gpio_chip alchemy_gpio_chip[] = {
 	},
 };
 
-static int __init alchemy_gpiolib_init(void)
+static int __init alchemy_gpiochip_init(void)
 {
-	gpiochip_add(&alchemy_gpio_chip[0]);
-	if (alchemy_get_cputype() != ALCHEMY_CPU_AU1000)
-		gpiochip_add(&alchemy_gpio_chip[1]);
-
-	return 0;
+	int ret = 0;
+
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+		ret = gpiochip_add(&alchemy_gpio_chip[0]);
+		break;
+	case ALCHEMY_CPU_AU1500...ALCHEMY_CPU_AU1200:
+		ret = gpiochip_add(&alchemy_gpio_chip[0]);
+		ret |= gpiochip_add(&alchemy_gpio_chip[1]);
+		break;
+	}
+	return ret;
 }
-arch_initcall(alchemy_gpiolib_init);
+arch_initcall(alchemy_gpiochip_init);

arch/mips/alchemy/common/pci.c

-/*
- * BRIEF MODULE DESCRIPTION
- *	Alchemy/AMD Au1x00 PCI support.
- *
- * Copyright 2001-2003, 2007-2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
- *
- *  Support for all devices (greater than 16) added by David Gathright.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-/* TBD */
-static struct resource pci_io_resource = {
-	.start	= PCI_IO_START,
-	.end	= PCI_IO_END,
-	.name	= "PCI IO space",
-	.flags	= IORESOURCE_IO
-};
-
-static struct resource pci_mem_resource = {
-	.start	= PCI_MEM_START,
-	.end	= PCI_MEM_END,
-	.name	= "PCI memory space",
-	.flags	= IORESOURCE_MEM
-};
-
-extern struct pci_ops au1x_pci_ops;
-
-static struct pci_controller au1x_controller = {
-	.pci_ops	= &au1x_pci_ops,
-	.io_resource	= &pci_io_resource,
-	.mem_resource	= &pci_mem_resource,
-};
-
-#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
-static unsigned long virt_io_addr;
-#endif
-
-static int __init au1x_pci_setup(void)
-{
-	extern void au1x_pci_cfg_init(void);
-
-#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
-	virt_io_addr = (unsigned long)ioremap(Au1500_PCI_IO_START,
-			Au1500_PCI_IO_END - Au1500_PCI_IO_START + 1);
-
-	if (!virt_io_addr) {
-		printk(KERN_ERR "Unable to ioremap pci space\n");
-		return 1;
-	}
-	au1x_controller.io_map_base = virt_io_addr;
-
-#ifdef CONFIG_DMA_NONCOHERENT
-	{
-		/*
-		 *  Set the NC bit in controller for Au1500 pre-AC silicon
-		 */
-		u32 prid = read_c0_prid();
-
-		if ((prid & 0xFF000000) == 0x01000000 && prid < 0x01030202) {
-			au_writel((1 << 16) | au_readl(Au1500_PCI_CFG),
-				  Au1500_PCI_CFG);
-			printk(KERN_INFO "Non-coherent PCI accesses enabled\n");
-		}
-	}
-#endif
-
-	set_io_port_base(virt_io_addr);
-#endif
-
-	au1x_pci_cfg_init();
-
-	register_pci_controller(&au1x_controller);
-	return 0;
-}
-
-arch_initcall(au1x_pci_setup);

arch/mips/alchemy/common/power.c

@@ -37,8 +37,6 @@
 #include <asm/uaccess.h>
 #include <asm/mach-au1x00/au1000.h>
 
-#ifdef CONFIG_PM
-
 /*
  * We need to save/restore a bunch of core registers that are
  * either volatile or reset to some state across a processor sleep.
@@ -49,7 +47,6 @@
  * We only have to save/restore registers that aren't otherwise
  * done as part of a driver pm_* function.
  */
-static unsigned int sleep_usb[2];
 static unsigned int sleep_sys_clocks[5];
 static unsigned int sleep_sys_pinfunc;
 static unsigned int sleep_static_memctlr[4][3];
@@ -57,31 +54,6 @@ static unsigned int sleep_static_memctlr[4][3];
 
 static void save_core_regs(void)
 {
-#ifndef CONFIG_SOC_AU1200
-	/* Shutdown USB host/device. */
-	sleep_usb[0] = au_readl(USB_HOST_CONFIG);
-
-	/* There appears to be some undocumented reset register.... */
-	au_writel(0, 0xb0100004);
-	au_sync();
-	au_writel(0, USB_HOST_CONFIG);
-	au_sync();
-
-	sleep_usb[1] = au_readl(USBD_ENABLE);
-	au_writel(0, USBD_ENABLE);
-	au_sync();
-
-#else	/* AU1200 */
-
-	/* enable access to OTG mmio so we can save OTG CAP/MUX.
-	 * FIXME: write an OTG driver and move this stuff there!
-	 */
-	au_writel(au_readl(USB_MSR_BASE + 4) | (1 << 6), USB_MSR_BASE + 4);
-	au_sync();
-	sleep_usb[0] = au_readl(0xb4020020);	/* OTG_CAP */
-	sleep_usb[1] = au_readl(0xb4020024);	/* OTG_MUX */
-#endif
-
 	/* Clocks and PLLs. */
 	sleep_sys_clocks[0] = au_readl(SYS_FREQCTRL0);
 	sleep_sys_clocks[1] = au_readl(SYS_FREQCTRL1);
@@ -125,22 +97,6 @@ static void restore_core_regs(void)
 	au_writel(sleep_sys_pinfunc, SYS_PINFUNC);
 	au_sync();
 
-#ifndef CONFIG_SOC_AU1200
-	au_writel(sleep_usb[0], USB_HOST_CONFIG);
-	au_writel(sleep_usb[1], USBD_ENABLE);
-	au_sync();
-#else
-	/* enable access to OTG memory */
-	au_writel(au_readl(USB_MSR_BASE + 4) | (1 << 6), USB_MSR_BASE + 4);
-	au_sync();
-
-	/* restore OTG caps and port mux. */
-	au_writel(sleep_usb[0], 0xb4020020 + 0);	/* OTG_CAP */
-	au_sync();
-	au_writel(sleep_usb[1], 0xb4020020 + 4);	/* OTG_MUX */
-	au_sync();
-#endif
-
 	/* Restore the static memory controller configuration. */
 	au_writel(sleep_static_memctlr[0][0], MEM_STCFG0);
 	au_writel(sleep_static_memctlr[0][1], MEM_STTIME0);
@@ -174,5 +130,3 @@ void au_sleep(void)
 
 	restore_core_regs();
 }
-
-#endif	/* CONFIG_PM */

arch/mips/alchemy/common/setup.c

@@ -73,8 +73,8 @@ void __init plat_mem_setup(void)
 /* This routine should be valid for all Au1x based boards */
 phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
 {
-	u32 start = (u32)Au1500_PCI_MEM_START;
-	u32 end   = (u32)Au1500_PCI_MEM_END;
+	unsigned long start = ALCHEMY_PCI_MEMWIN_START;
+	unsigned long end = ALCHEMY_PCI_MEMWIN_END;
 
 	/* Don't fixup 36-bit addresses */
 	if ((phys_addr >> 32) != 0)
@@ -82,7 +82,7 @@ phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
 
 	/* Check for PCI memory window */
 	if (phys_addr >= start && (phys_addr + size - 1) <= end)
-		return (phys_t)((phys_addr - start) + Au1500_PCI_MEM_START);
+		return (phys_t)(AU1500_PCI_MEM_PHYS_ADDR + phys_addr);
 
 	/* default nop */
 	return phys_addr;

arch/mips/alchemy/devboards/db1200/platform.c

@@ -213,7 +213,12 @@ static struct resource db1200_ide_res[] = {
 		.start	= DB1200_IDE_INT,
 		.end	= DB1200_IDE_INT,
 		.flags	= IORESOURCE_IRQ,
-	}
+	},
+	[2] = {
+		.start	= AU1200_DSCR_CMD0_DMA_REQ1,
+		.end	= AU1200_DSCR_CMD0_DMA_REQ1,
+		.flags	= IORESOURCE_DMA,
+	},
 };
 
 static u64 ide_dmamask = DMA_BIT_MASK(32);
@@ -328,23 +333,85 @@ static struct led_classdev db1200_mmc_led = {
 	.brightness_set	= db1200_mmcled_set,
 };
 
-/* needed by arch/mips/alchemy/common/platform.c */
-struct au1xmmc_platform_data au1xmmc_platdata[] = {
-	[0] = {
+static struct au1xmmc_platform_data db1200mmc_platdata = {
 	.cd_setup	= db1200_mmc_cd_setup,
 	.set_power	= db1200_mmc_set_power,
 	.card_inserted	= db1200_mmc_card_inserted,
 	.card_readonly	= db1200_mmc_card_readonly,
 	.led		= &db1200_mmc_led,
+};
+
+static struct resource au1200_mmc0_resources[] = {
+	[0] = {
+		.start	= AU1100_SD0_PHYS_ADDR,
+		.end	= AU1100_SD0_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1200_SD_INT,
+		.end	= AU1200_SD_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1200_DSCR_CMD0_SDMS_TX0,
+		.end	= AU1200_DSCR_CMD0_SDMS_TX0,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1200_DSCR_CMD0_SDMS_RX0,
+		.end	= AU1200_DSCR_CMD0_SDMS_RX0,
+		.flags	= IORESOURCE_DMA,
+	}
+};
+
+static u64 au1xxx_mmc_dmamask =  DMA_BIT_MASK(32);
+
+static struct platform_device db1200_mmc0_dev = {
+	.name		= "au1xxx-mmc",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &au1xxx_mmc_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &db1200mmc_platdata,
+	},
+	.num_resources	= ARRAY_SIZE(au1200_mmc0_resources),
+	.resource	= au1200_mmc0_resources,
+};
+
+/**********************************************************************/
+
+static struct resource au1200_lcd_res[] = {
+	[0] = {
+		.start	= AU1200_LCD_PHYS_ADDR,
+		.end	= AU1200_LCD_PHYS_ADDR + 0x800 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1200_LCD_INT,
+		.end	= AU1200_LCD_INT,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static u64 au1200_lcd_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device au1200_lcd_dev = {
+	.name		= "au1200-lcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &au1200_lcd_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
 	},
+	.num_resources	= ARRAY_SIZE(au1200_lcd_res),
+	.resource	= au1200_lcd_res,
 };
 
 /**********************************************************************/
 
 static struct resource au1200_psc0_res[] = {
 	[0] = {
-		.start	= PSC0_PHYS_ADDR,
-		.end	= PSC0_PHYS_ADDR + 0x000fffff,
+		.start	= AU1550_PSC0_PHYS_ADDR,
+		.end	= AU1550_PSC0_PHYS_ADDR + 0xfff,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -353,13 +420,13 @@ static struct resource au1200_psc0_res[] = {
 		.flags	= IORESOURCE_IRQ,
 	},
 	[2] = {
-		.start	= DSCR_CMD0_PSC0_TX,
-		.end	= DSCR_CMD0_PSC0_TX,
+		.start	= AU1200_DSCR_CMD0_PSC0_TX,
+		.end	= AU1200_DSCR_CMD0_PSC0_TX,
 		.flags	= IORESOURCE_DMA,
 	},
 	[3] = {
-		.start	= DSCR_CMD0_PSC0_RX,
-		.end	= DSCR_CMD0_PSC0_RX,
+		.start	= AU1200_DSCR_CMD0_PSC0_RX,
+		.end	= AU1200_DSCR_CMD0_PSC0_RX,
 		.flags	= IORESOURCE_DMA,
 	},
 };
@@ -401,8 +468,8 @@ static struct platform_device db1200_spi_dev = {
 
 static struct resource au1200_psc1_res[] = {
 	[0] = {
-		.start	= PSC1_PHYS_ADDR,
-		.end	= PSC1_PHYS_ADDR + 0x000fffff,
+		.start	= AU1550_PSC1_PHYS_ADDR,
+		.end	= AU1550_PSC1_PHYS_ADDR + 0xfff,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -411,13 +478,13 @@ static struct resource au1200_psc1_res[] = {
 		.flags	= IORESOURCE_IRQ,
 	},
 	[2] = {
-		.start	= DSCR_CMD0_PSC1_TX,
-		.end	= DSCR_CMD0_PSC1_TX,
+		.start	= AU1200_DSCR_CMD0_PSC1_TX,
+		.end	= AU1200_DSCR_CMD0_PSC1_TX,
 		.flags	= IORESOURCE_DMA,
 	},
 	[3] = {
-		.start	= DSCR_CMD0_PSC1_RX,
-		.end	= DSCR_CMD0_PSC1_RX,
+		.start	= AU1200_DSCR_CMD0_PSC1_RX,
+		.end	= AU1200_DSCR_CMD0_PSC1_RX,
 		.flags	= IORESOURCE_DMA,
 	},
 };
@@ -449,6 +516,8 @@ static struct platform_device db1200_audiodma_dev = {
 static struct platform_device *db1200_devs[] __initdata = {
 	NULL,		/* PSC0, selected by S6.8 */
 	&db1200_ide_dev,
+	&db1200_mmc0_dev,
+	&au1200_lcd_dev,
 	&db1200_eth_dev,
 	&db1200_rtc_dev,
 	&db1200_nand_dev,
@@ -526,32 +595,28 @@ static int __init db1200_dev_init(void)
 
 	/* Audio PSC clock is supplied externally. (FIXME: platdata!!) */
 	__raw_writel(PSC_SEL_CLK_SERCLK,
-		(void __iomem *)KSEG1ADDR(PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
+		(void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
 	wmb();
 
-	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
-				    PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
-				    PCMCIA_MEM_PHYS_ADDR,
-				    PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
-				    PCMCIA_IO_PHYS_ADDR,
-				    PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
-				    DB1200_PC0_INT,
-				    DB1200_PC0_INSERT_INT,
-				    /*DB1200_PC0_STSCHG_INT*/0,
-				    DB1200_PC0_EJECT_INT,
-				    0);
-
-	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
-				    PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
-				    PCMCIA_MEM_PHYS_ADDR  + 0x004000000,
-				    PCMCIA_MEM_PHYS_ADDR  + 0x004400000 - 1,
-				    PCMCIA_IO_PHYS_ADDR   + 0x004000000,
-				    PCMCIA_IO_PHYS_ADDR   + 0x004010000 - 1,
-				    DB1200_PC1_INT,
-				    DB1200_PC1_INSERT_INT,
-				    /*DB1200_PC1_STSCHG_INT*/0,
-				    DB1200_PC1_EJECT_INT,
-				    1);
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
+		DB1200_PC0_INT, DB1200_PC0_INSERT_INT,
+		/*DB1200_PC0_STSCHG_INT*/0, DB1200_PC0_EJECT_INT, 0);
+
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x004000000,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x004400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004000000,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004010000 - 1,
+		DB1200_PC1_INT, DB1200_PC1_INSERT_INT,
+		/*DB1200_PC1_STSCHG_INT*/0, DB1200_PC1_EJECT_INT, 1);
 
 	swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT;
 	db1x_register_norflash(64 << 20, 2, swapped);

arch/mips/alchemy/devboards/db1x00/board_setup.c

@@ -40,24 +40,6 @@
 
 #include <prom.h>
 
-#ifdef CONFIG_MIPS_DB1500
-char irq_tab_alchemy[][5] __initdata = {
-	[12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - HPT371   */
-	[13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */
-};
-
-#endif
-
-
-#ifdef CONFIG_MIPS_DB1550
-char irq_tab_alchemy[][5] __initdata = {
-	[11] = { -1, AU1550_PCI_INTC, 0xff, 0xff, 0xff }, /* IDSEL 11 - on-board HPT371 */
-	[12] = { -1, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD, AU1550_PCI_INTA }, /* IDSEL 12 - PCI slot 2 (left) */
-	[13] = { -1, AU1550_PCI_INTA, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD }, /* IDSEL 13 - PCI slot 1 (right) */
-};
-#endif
-
-
 #ifdef CONFIG_MIPS_BOSPORUS
 char irq_tab_alchemy[][5] __initdata = {
 	[11] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 11 - miniPCI  */
@@ -91,12 +73,6 @@ const char *get_system_type(void)
 
 
 #ifdef CONFIG_MIPS_MIRAGE
-char irq_tab_alchemy[][5] __initdata = {
-	[11] = { -1, AU1500_PCI_INTD, 0xff, 0xff, 0xff }, /* IDSEL 11 - SMI VGX */
-	[12] = { -1, 0xff, 0xff, AU1500_PCI_INTC, 0xff }, /* IDSEL 12 - PNX1300 */
-	[13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 13 - miniPCI */
-};
-
 static void mirage_power_off(void)
 {
 	alchemy_gpio_direction_output(210, 1);
@@ -158,9 +134,7 @@ void __init board_setup(void)
 	/* initialize board register space */
 	bcsr_init(bcsr1, bcsr2);
 
-	/* Not valid for Au1550 */
-#if defined(CONFIG_IRDA) && \
-   (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
+#if defined(CONFIG_IRDA) && defined(CONFIG_AU1000_FIR)
 	{
 		u32 pin_func;
 

arch/mips/alchemy/devboards/db1x00/platform.c

@@ -20,14 +20,16 @@
 
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1000_dma.h>
-#include <asm/mach-au1x00/au1xxx.h>
 #include <asm/mach-db1x00/bcsr.h>
 #include "../platform.h"
 
+struct pci_dev;
+
 /* DB1xxx PCMCIA interrupt sources:
  * CD0/1 	GPIO0/3
  * STSCHG0/1	GPIO1/4
@@ -88,6 +90,155 @@
 #endif
 #endif
 
+#ifdef CONFIG_PCI
+#ifdef CONFIG_MIPS_DB1500
+static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+	if ((slot < 12) || (slot > 13) || pin == 0)
+		return -1;
+	if (slot == 12)
+		return (pin == 1) ? AU1500_PCI_INTA : 0xff;
+	if (slot == 13) {
+		switch (pin) {
+		case 1: return AU1500_PCI_INTA;
+		case 2: return AU1500_PCI_INTB;
+		case 3: return AU1500_PCI_INTC;
+		case 4: return AU1500_PCI_INTD;
+		}
+	}
+	return -1;
+}
+#endif
+
+#ifdef CONFIG_MIPS_DB1550
+static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+	if ((slot < 11) || (slot > 13) || pin == 0)
+		return -1;
+	if (slot == 11)
+		return (pin == 1) ? AU1550_PCI_INTC : 0xff;
+	if (slot == 12) {
+		switch (pin) {
+		case 1: return AU1550_PCI_INTB;
+		case 2: return AU1550_PCI_INTC;
+		case 3: return AU1550_PCI_INTD;
+		case 4: return AU1550_PCI_INTA;
+		}
+	}
+	if (slot == 13) {
+		switch (pin) {
+		case 1: return AU1550_PCI_INTA;
+		case 2: return AU1550_PCI_INTB;
+		case 3: return AU1550_PCI_INTC;
+		case 4: return AU1550_PCI_INTD;
+		}
+	}
+	return -1;
+}
+#endif
+
+#ifdef CONFIG_MIPS_BOSPORUS
+static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+	if ((slot < 11) || (slot > 13) || pin == 0)
+		return -1;
+	if (slot == 12)
+		return (pin == 1) ? AU1500_PCI_INTA : 0xff;
+	if (slot == 11) {
+		switch (pin) {
+		case 1: return AU1500_PCI_INTA;
+		case 2: return AU1500_PCI_INTB;
+		default: return 0xff;
+		}
+	}
+	if (slot == 13) {
+		switch (pin) {
+		case 1: return AU1500_PCI_INTA;
+		case 2: return AU1500_PCI_INTB;
+		case 3: return AU1500_PCI_INTC;
+		case 4: return AU1500_PCI_INTD;
+		}
+	}
+	return -1;
+}
+#endif
+
+#ifdef CONFIG_MIPS_MIRAGE
+static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+	if ((slot < 11) || (slot > 13) || pin == 0)
+		return -1;
+	if (slot == 11)
+		return (pin == 1) ? AU1500_PCI_INTD : 0xff;
+	if (slot == 12)
+		return (pin == 3) ? AU1500_PCI_INTC : 0xff;
+	if (slot == 13) {
+		switch (pin) {
+		case 1: return AU1500_PCI_INTA;
+		case 2: return AU1500_PCI_INTB;
+		default: return 0xff;
+		}
+	}
+	return -1;
+}
+#endif
+
+static struct resource alchemy_pci_host_res[] = {
+	[0] = {
+		.start	= AU1500_PCI_PHYS_ADDR,
+		.end	= AU1500_PCI_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct alchemy_pci_platdata db1xxx_pci_pd = {
+	.board_map_irq	= db1xxx_map_pci_irq,
+};
+
+static struct platform_device db1xxx_pci_host_dev = {
+	.dev.platform_data = &db1xxx_pci_pd,
+	.name		= "alchemy-pci",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(alchemy_pci_host_res),
+	.resource	= alchemy_pci_host_res,
+};
+
+static int __init db15x0_pci_init(void)
+{
+	return platform_device_register(&db1xxx_pci_host_dev);
+}
+/* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */
+arch_initcall(db15x0_pci_init);
+#endif
+
+#ifdef CONFIG_MIPS_DB1100
+static struct resource au1100_lcd_resources[] = {
+	[0] = {
+		.start	= AU1100_LCD_PHYS_ADDR,
+		.end	= AU1100_LCD_PHYS_ADDR + 0x800 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1100_LCD_INT,
+		.end	= AU1100_LCD_INT,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device au1100_lcd_device = {
+	.name		= "au1100-lcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &au1100_lcd_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(au1100_lcd_resources),
+	.resource	= au1100_lcd_resources,
+};
+#endif
+
 static struct resource alchemy_ac97c_res[] = {
 	[0] = {
 		.start	= AU1000_AC97_PHYS_ADDR,
@@ -130,29 +281,28 @@ static struct platform_device db1x00_audio_dev = {
 static int __init db1xxx_dev_init(void)
 {
 #ifdef DB1XXX_HAS_PCMCIA
-	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
-				    PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
-				    PCMCIA_MEM_PHYS_ADDR,
-				    PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
-				    PCMCIA_IO_PHYS_ADDR,
-				    PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
-				    DB1XXX_PCMCIA_CARD0,
-				    DB1XXX_PCMCIA_CD0,
-				    /*DB1XXX_PCMCIA_STSCHG0*/0,
-				    0,
-				    0);
-
-	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
-				    PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
-				    PCMCIA_MEM_PHYS_ADDR  + 0x004000000,
-				    PCMCIA_MEM_PHYS_ADDR  + 0x004400000 - 1,
-				    PCMCIA_IO_PHYS_ADDR   + 0x004000000,
-				    PCMCIA_IO_PHYS_ADDR   + 0x004010000 - 1,
-				    DB1XXX_PCMCIA_CARD1,
-				    DB1XXX_PCMCIA_CD1,
-				    /*DB1XXX_PCMCIA_STSCHG1*/0,
-				    0,
-				    1);
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
+		DB1XXX_PCMCIA_CARD0, DB1XXX_PCMCIA_CD0,
+		/*DB1XXX_PCMCIA_STSCHG0*/0, 0, 0);
+
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x004000000,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x004400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004000000,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004010000 - 1,
+		DB1XXX_PCMCIA_CARD1, DB1XXX_PCMCIA_CD1,
+		/*DB1XXX_PCMCIA_STSCHG1*/0, 0, 1);
+#endif
+#ifdef CONFIG_MIPS_DB1100
+	platform_device_register(&au1100_lcd_device);
 #endif
 	db1x_register_norflash(BOARD_FLASH_SIZE, BOARD_FLASH_WIDTH, F_SWAPPED);
 

arch/mips/alchemy/devboards/pb1100/platform.c

@@ -19,31 +19,58 @@
  */
 
 #include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
 
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-db1x00/bcsr.h>
 
 #include "../platform.h"
 
+static struct resource au1100_lcd_resources[] = {
+	[0] = {
+		.start	= AU1100_LCD_PHYS_ADDR,
+		.end	= AU1100_LCD_PHYS_ADDR + 0x800 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1100_LCD_INT,
+		.end	= AU1100_LCD_INT,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device au1100_lcd_device = {
+	.name		= "au1100-lcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &au1100_lcd_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(au1100_lcd_resources),
+	.resource	= au1100_lcd_resources,
+};
+
 static int __init pb1100_dev_init(void)
 {
 	int swapped;
 
 	/* PCMCIA. single socket, identical to Pb1500 */
-	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
-				    PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
-				    PCMCIA_MEM_PHYS_ADDR,
-				    PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
-				    PCMCIA_IO_PHYS_ADDR,
-				    PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
-				    AU1100_GPIO11_INT,	 /* card */
-				    AU1100_GPIO9_INT,	 /* insert */
-				    /*AU1100_GPIO10_INT*/0, /* stschg */
-				    0,			 /* eject */
-				    0);			 /* id */
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
+		AU1100_GPIO11_INT, AU1100_GPIO9_INT,	 /* card / insert */
+		/*AU1100_GPIO10_INT*/0, 0, 0); /* stschg / eject / id */
 
 	swapped = bcsr_read(BCSR_STATUS) &  BCSR_STATUS_DB1000_SWAPBOOT;
 	db1x_register_norflash(64 * 1024 * 1024, 4, swapped);
+	platform_device_register(&au1100_lcd_device);
 
 	return 0;
 }

arch/mips/alchemy/devboards/pb1200/platform.c

@@ -24,9 +24,11 @@
 #include <linux/platform_device.h>
 #include <linux/smc91x.h>
 
-#include <asm/mach-au1x00/au1xxx.h>
+#include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1100_mmc.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
 #include <asm/mach-db1x00/bcsr.h>
+#include <asm/mach-pb1x00/pb1200.h>
 
 #include "../platform.h"
 
@@ -88,7 +90,7 @@ static int pb1200mmc1_card_inserted(void *mmc_host)
 	return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) ? 1 : 0;
 }
 
-const struct au1xmmc_platform_data au1xmmc_platdata[2] = {
+static struct au1xmmc_platform_data pb1200mmc_platdata[2] = {
 	[0] = {
 		.set_power	= pb1200mmc0_set_power,
 		.card_inserted	= pb1200mmc0_card_inserted,
@@ -105,6 +107,79 @@ const struct au1xmmc_platform_data au1xmmc_platdata[2] = {
 	},
 };
 
+static u64 au1xxx_mmc_dmamask =  DMA_BIT_MASK(32);
+
+static struct resource au1200_mmc0_res[] = {
+	[0] = {
+		.start	= AU1100_SD0_PHYS_ADDR,
+		.end	= AU1100_SD0_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1200_SD_INT,
+		.end	= AU1200_SD_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1200_DSCR_CMD0_SDMS_TX0,
+		.end	= AU1200_DSCR_CMD0_SDMS_TX0,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1200_DSCR_CMD0_SDMS_RX0,
+		.end	= AU1200_DSCR_CMD0_SDMS_RX0,
+		.flags	= IORESOURCE_DMA,
+	}
+};
+
+static struct platform_device pb1200_mmc0_dev = {
+	.name		= "au1xxx-mmc",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &au1xxx_mmc_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &pb1200mmc_platdata[0],
+	},
+	.num_resources	= ARRAY_SIZE(au1200_mmc0_res),
+	.resource	= au1200_mmc0_res,
+};
+
+static struct resource au1200_mmc1_res[] = {
+	[0] = {
+		.start	= AU1100_SD1_PHYS_ADDR,
+		.end	= AU1100_SD1_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1200_SD_INT,
+		.end	= AU1200_SD_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1200_DSCR_CMD0_SDMS_TX1,
+		.end	= AU1200_DSCR_CMD0_SDMS_TX1,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1200_DSCR_CMD0_SDMS_RX1,
+		.end	= AU1200_DSCR_CMD0_SDMS_RX1,
+		.flags	= IORESOURCE_DMA,
+	}
+};
+
+static struct platform_device pb1200_mmc1_dev = {
+	.name		= "au1xxx-mmc",
+	.id		= 1,
+	.dev = {
+		.dma_mask		= &au1xxx_mmc_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &pb1200mmc_platdata[1],
+	},
+	.num_resources	= ARRAY_SIZE(au1200_mmc1_res),
+	.resource	= au1200_mmc1_res,
+};
+
+
 static struct resource ide_resources[] = {
 	[0] = {
 		.start	= IDE_PHYS_ADDR,
@@ -115,7 +190,12 @@ static struct resource ide_resources[] = {
 		.start	= IDE_INT,
 		.end	= IDE_INT,
 		.flags	= IORESOURCE_IRQ
-	}
+	},
+	[2] = {
+		.start	= AU1200_DSCR_CMD0_DMA_REQ1,
+		.end	= AU1200_DSCR_CMD0_DMA_REQ1,
+		.flags	= IORESOURCE_DMA,
+	},
 };
 
 static u64 ide_dmamask = DMA_BIT_MASK(32);
@@ -161,38 +241,94 @@ static struct platform_device smc91c111_device = {
 	.resource	= smc91c111_resources
 };
 
+static struct resource au1200_psc0_res[] = {
+	[0] = {
+		.start	= AU1550_PSC0_PHYS_ADDR,
+		.end	= AU1550_PSC0_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1200_PSC0_INT,
+		.end	= AU1200_PSC0_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1200_DSCR_CMD0_PSC0_TX,
+		.end	= AU1200_DSCR_CMD0_PSC0_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1200_DSCR_CMD0_PSC0_RX,
+		.end	= AU1200_DSCR_CMD0_PSC0_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device pb1200_i2c_dev = {
+	.name		= "au1xpsc_smbus",
+	.id		= 0,	/* bus number */
+	.num_resources	= ARRAY_SIZE(au1200_psc0_res),
+	.resource	= au1200_psc0_res,
+};
+
+static struct resource au1200_lcd_res[] = {
+	[0] = {
+		.start	= AU1200_LCD_PHYS_ADDR,
+		.end	= AU1200_LCD_PHYS_ADDR + 0x800 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1200_LCD_INT,
+		.end	= AU1200_LCD_INT,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static u64 au1200_lcd_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device au1200_lcd_dev = {
+	.name		= "au1200-lcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &au1200_lcd_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(au1200_lcd_res),
+	.resource	= au1200_lcd_res,
+};
+
 static struct platform_device *board_platform_devices[] __initdata = {
 	&ide_device,
-	&smc91c111_device
+	&smc91c111_device,
+	&pb1200_i2c_dev,
+	&pb1200_mmc0_dev,
+	&pb1200_mmc1_dev,
+	&au1200_lcd_dev,
 };
 
 static int __init board_register_devices(void)
 {
 	int swapped;
 
-	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
-				    PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
-				    PCMCIA_MEM_PHYS_ADDR,
-				    PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
-				    PCMCIA_IO_PHYS_ADDR,
-				    PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
-				    PB1200_PC0_INT,
-				    PB1200_PC0_INSERT_INT,
-				    /*PB1200_PC0_STSCHG_INT*/0,
-				    PB1200_PC0_EJECT_INT,
-				    0);
-
-	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x008000000,
-				    PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1,
-				    PCMCIA_MEM_PHYS_ADDR  + 0x008000000,
-				    PCMCIA_MEM_PHYS_ADDR  + 0x008400000 - 1,
-				    PCMCIA_IO_PHYS_ADDR   + 0x008000000,
-				    PCMCIA_IO_PHYS_ADDR   + 0x008010000 - 1,
-				    PB1200_PC1_INT,
-				    PB1200_PC1_INSERT_INT,
-				    /*PB1200_PC1_STSCHG_INT*/0,
-				    PB1200_PC1_EJECT_INT,
-				    1);
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
+		PB1200_PC0_INT, PB1200_PC0_INSERT_INT,
+		/*PB1200_PC0_STSCHG_INT*/0, PB1200_PC0_EJECT_INT, 0);
+
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x008000000,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x008000000,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x008400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x008000000,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x008010000 - 1,
+		PB1200_PC1_INT, PB1200_PC1_INSERT_INT,
+		/*PB1200_PC1_STSCHG_INT*/0, PB1200_PC1_EJECT_INT, 1);
 
 	swapped = bcsr_read(BCSR_STATUS) &  BCSR_STATUS_DB1200_SWAPBOOT;
 	db1x_register_norflash(128 * 1024 * 1024, 2, swapped);

arch/mips/alchemy/devboards/pb1500/board_setup.c

@@ -33,13 +33,6 @@
 
 #include <prom.h>
 
-
-char irq_tab_alchemy[][5] __initdata = {
-	[12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff },   /* IDSEL 12 - HPT370	*/
-	[13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD },   /* IDSEL 13 - PCI slot */
-};
-
-
 const char *get_system_type(void)
 {
 	return "Alchemy Pb1500";
@@ -101,20 +94,18 @@ void __init board_setup(void)
 #endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
 
 #ifdef CONFIG_PCI
+	{
+		void __iomem *base =
+				(void __iomem *)KSEG1ADDR(AU1500_PCI_PHYS_ADDR);
 		/* Setup PCI bus controller */
-	au_writel(0, Au1500_PCI_CMEM);
-	au_writel(0x00003fff, Au1500_CFG_BASE);
-#if defined(__MIPSEB__)
-	au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
-#else
-	au_writel(0xf, Au1500_PCI_CFG);
-#endif
-	au_writel(0xf0000000, Au1500_PCI_MWMASK_DEV);
-	au_writel(0, Au1500_PCI_MWBASE_REV_CCL);
-	au_writel(0x02a00356, Au1500_PCI_STATCMD);
-	au_writel(0x00003c04, Au1500_PCI_HDRTYPE);
-	au_writel(0x00000008, Au1500_PCI_MBAR);
-	au_sync();
+		__raw_writel(0x00003fff, base + PCI_REG_CMEM);
+		__raw_writel(0xf0000000, base + PCI_REG_MWMASK_DEV);
+		__raw_writel(0, base + PCI_REG_MWBASE_REV_CCL);
+		__raw_writel(0x02a00356, base + PCI_REG_STATCMD);
+		__raw_writel(0x00003c04, base + PCI_REG_PARAM);
+		__raw_writel(0x00000008, base + PCI_REG_MBAR);
+		wmb();
+	}
 #endif
 
 	/* Enable sys bus clock divider when IDLE state or no bus activity. */

arch/mips/alchemy/devboards/pb1500/platform.c

@@ -18,32 +18,77 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#include <linux/dma-mapping.h>
 #include <linux/init.h>
+#include <linux/platform_device.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-db1x00/bcsr.h>
 
 #include "../platform.h"
 
+static int pb1500_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+	if ((slot < 12) || (slot > 13) || pin == 0)
+		return -1;
+	if (slot == 12)
+		return (pin == 1) ? AU1500_PCI_INTA : 0xff;
+	if (slot == 13) {
+		switch (pin) {
+		case 1: return AU1500_PCI_INTA;
+		case 2: return AU1500_PCI_INTB;
+		case 3: return AU1500_PCI_INTC;
+		case 4: return AU1500_PCI_INTD;
+		}
+	}
+	return -1;
+}
+
+static struct resource alchemy_pci_host_res[] = {
+	[0] = {
+		.start	= AU1500_PCI_PHYS_ADDR,
+		.end	= AU1500_PCI_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct alchemy_pci_platdata pb1500_pci_pd = {
+	.board_map_irq	= pb1500_map_pci_irq,
+	.pci_cfg_set	= PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H |
+			  PCI_CONFIG_CH |
+#if defined(__MIPSEB__)
+			  PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM,
+#else
+			  0,
+#endif
+};
+
+static struct platform_device pb1500_pci_host = {
+	.dev.platform_data = &pb1500_pci_pd,
+	.name		= "alchemy-pci",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(alchemy_pci_host_res),
+	.resource	= alchemy_pci_host_res,
+};
+
 static int __init pb1500_dev_init(void)
 {
 	int swapped;
 
-	/* PCMCIA. single socket, identical to Pb1500 */
-	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
-				    PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
-				    PCMCIA_MEM_PHYS_ADDR,
-				    PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
-				    PCMCIA_IO_PHYS_ADDR,
-				    PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
-				    AU1500_GPIO11_INT,	 /* card */
-				    AU1500_GPIO9_INT,	 /* insert */
-				    /*AU1500_GPIO10_INT*/0, /* stschg */
-				    0,			 /* eject */
-				    0);			 /* id */
+	/* PCMCIA. single socket, identical to Pb1100 */
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
+		AU1500_GPIO11_INT, AU1500_GPIO9_INT,	 /* card / insert */
+		/*AU1500_GPIO10_INT*/0, 0, 0); /* stschg / eject / id */
 
 	swapped = bcsr_read(BCSR_STATUS) &  BCSR_STATUS_DB1000_SWAPBOOT;
 	db1x_register_norflash(64 * 1024 * 1024, 4, swapped);
+	platform_device_register(&pb1500_pci_host);
 
 	return 0;
 }
-device_initcall(pb1500_dev_init);
+arch_initcall(pb1500_dev_init);

arch/mips/alchemy/devboards/pb1550/board_setup.c

@@ -37,12 +37,6 @@
 
 #include <prom.h>
 
-
-char irq_tab_alchemy[][5] __initdata = {
-	[12] = { -1, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD, AU1550_PCI_INTA }, /* IDSEL 12 - PCI slot 2 (left)  */
-	[13] = { -1, AU1550_PCI_INTA, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD }, /* IDSEL 13 - PCI slot 1 (right) */
-};
-
 const char *get_system_type(void)
 {
 	return "Alchemy Pb1550";

arch/mips/alchemy/devboards/pb1550/platform.c

@@ -18,14 +18,89 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#include <linux/dma-mapping.h>
 #include <linux/init.h>
-
+#include <linux/platform_device.h>
 #include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
 #include <asm/mach-pb1x00/pb1550.h>
 #include <asm/mach-db1x00/bcsr.h>
 
 #include "../platform.h"
 
+static int pb1550_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+	if ((slot < 12) || (slot > 13) || pin == 0)
+		return -1;
+	if (slot == 12) {
+		switch (pin) {
+		case 1: return AU1500_PCI_INTB;
+		case 2: return AU1500_PCI_INTC;
+		case 3: return AU1500_PCI_INTD;
+		case 4: return AU1500_PCI_INTA;
+		}
+	}
+	if (slot == 13) {
+		switch (pin) {
+		case 1: return AU1500_PCI_INTA;
+		case 2: return AU1500_PCI_INTB;
+		case 3: return AU1500_PCI_INTC;
+		case 4: return AU1500_PCI_INTD;
+		}
+	}
+	return -1;
+}
+
+static struct resource alchemy_pci_host_res[] = {
+	[0] = {
+		.start	= AU1500_PCI_PHYS_ADDR,
+		.end	= AU1500_PCI_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct alchemy_pci_platdata pb1550_pci_pd = {
+	.board_map_irq	= pb1550_map_pci_irq,
+};
+
+static struct platform_device pb1550_pci_host = {
+	.dev.platform_data = &pb1550_pci_pd,
+	.name		= "alchemy-pci",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(alchemy_pci_host_res),
+	.resource	= alchemy_pci_host_res,
+};
+
+static struct resource au1550_psc2_res[] = {
+	[0] = {
+		.start	= AU1550_PSC2_PHYS_ADDR,
+		.end	= AU1550_PSC2_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1550_PSC2_INT,
+		.end	= AU1550_PSC2_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1550_DSCR_CMD0_PSC2_TX,
+		.end	= AU1550_DSCR_CMD0_PSC2_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1550_DSCR_CMD0_PSC2_RX,
+		.end	= AU1550_DSCR_CMD0_PSC2_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device pb1550_i2c_dev = {
+	.name		= "au1xpsc_smbus",
+	.id		= 0,	/* bus number */
+	.num_resources	= ARRAY_SIZE(au1550_psc2_res),
+	.resource	= au1550_psc2_res,
+};
+
 static int __init pb1550_dev_init(void)
 {
 	int swapped;
@@ -37,33 +112,29 @@ static int __init pb1550_dev_init(void)
 	* drivers are used to shared irqs and b) statuschange isn't really use-
 	* ful anyway.
 	*/
-	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
-				    PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
-				    PCMCIA_MEM_PHYS_ADDR,
-				    PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
-				    PCMCIA_IO_PHYS_ADDR,
-				    PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
-				    AU1550_GPIO201_205_INT,
-				    AU1550_GPIO0_INT,
-				    0,
-				    0,
-				    0);
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
+		AU1550_GPIO201_205_INT, AU1550_GPIO0_INT, 0, 0, 0);
 
-	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x008000000,
-				    PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1,
-				    PCMCIA_MEM_PHYS_ADDR  + 0x008000000,
-				    PCMCIA_MEM_PHYS_ADDR  + 0x008400000 - 1,
-				    PCMCIA_IO_PHYS_ADDR   + 0x008000000,
-				    PCMCIA_IO_PHYS_ADDR   + 0x008010000 - 1,
-				    AU1550_GPIO201_205_INT,
-				    AU1550_GPIO1_INT,
-				    0,
-				    0,
-				    1);
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x008000000,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x008000000,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x008400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x008000000,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x008010000 - 1,
+		AU1550_GPIO201_205_INT, AU1550_GPIO1_INT, 0, 0, 1);
 
 	swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_PB1550_SWAPBOOT;
 	db1x_register_norflash(128 * 1024 * 1024, 4, swapped);
+	platform_device_register(&pb1550_pci_host);
+	platform_device_register(&pb1550_i2c_dev);
 
 	return 0;
 }
-device_initcall(pb1550_dev_init);
+arch_initcall(pb1550_dev_init);

arch/mips/alchemy/gpr/board_setup.c

@@ -36,10 +36,6 @@
 
 #include <prom.h>
 
-char irq_tab_alchemy[][5] __initdata = {
-	[0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff },
-};
-
 static void gpr_reset(char *c)
 {
 	/* switch System-LED to orange (red# and green# on) */
@@ -76,12 +72,4 @@ void __init board_setup(void)
 
 	/* Take away Reset of UMTS-card */
 	alchemy_gpio_direction_output(215, 1);
-
-#ifdef CONFIG_PCI
-#if defined(__MIPSEB__)
-	au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
-#else
-	au_writel(0xf, Au1500_PCI_CFG);
-#endif
-#endif
 }

arch/mips/alchemy/gpr/platform.c

@@ -167,6 +167,45 @@ static struct i2c_board_info gpr_i2c_info[] __initdata = {
 	}
 };
 
+
+
+static struct resource alchemy_pci_host_res[] = {
+	[0] = {
+		.start	= AU1500_PCI_PHYS_ADDR,
+		.end	= AU1500_PCI_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static int gpr_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+	if ((slot == 0) && (pin == 1))
+		return AU1550_PCI_INTA;
+	else if ((slot == 0) && (pin == 2))
+		return AU1550_PCI_INTB;
+
+	return -1;
+}
+
+static struct alchemy_pci_platdata gpr_pci_pd = {
+	.board_map_irq	= gpr_map_pci_irq,
+	.pci_cfg_set	= PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H |
+			  PCI_CONFIG_CH |
+#if defined(__MIPSEB__)
+			  PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM,
+#else
+			  0,
+#endif
+};
+
+static struct platform_device gpr_pci_host_dev = {
+	.dev.platform_data = &gpr_pci_pd,
+	.name		= "alchemy-pci",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(alchemy_pci_host_res),
+	.resource	= alchemy_pci_host_res,
+};
+
 static struct platform_device *gpr_devices[] __initdata = {
 	&gpr_wdt_device,
 	&gpr_mtd_device,
@@ -174,6 +213,14 @@ static struct platform_device *gpr_devices[] __initdata = {
 	&gpr_led_devices,
 };
 
+static int __init gpr_pci_init(void)
+{
+	return platform_device_register(&gpr_pci_host_dev);
+}
+/* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */
+arch_initcall(gpr_pci_init);
+
+
 static int __init gpr_dev_init(void)
 {
 	i2c_register_board_info(0, gpr_i2c_info, ARRAY_SIZE(gpr_i2c_info));

arch/mips/alchemy/mtx-1/board_setup.c

@@ -38,20 +38,6 @@
 
 #include <prom.h>
 
-char irq_tab_alchemy[][5] __initdata = {
-	[0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 00 - AdapterA-Slot0 (top) */
-	[1] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
-	[2] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 02 - AdapterB-Slot0 (top) */
-	[3] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
-	[4] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 04 - AdapterC-Slot0 (top) */
-	[5] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
-	[6] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 06 - AdapterD-Slot0 (top) */
-	[7] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
-};
-
-extern int (*board_pci_idsel)(unsigned int devsel, int assert);
-int mtx1_pci_idsel(unsigned int devsel, int assert);
-
 static void mtx1_reset(char *c)
 {
 	/* Jump to the reset vector */
@@ -74,15 +60,6 @@ void __init board_setup(void)
 	alchemy_gpio_direction_output(204, 0);
 #endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
 
-#ifdef CONFIG_PCI
-#if defined(__MIPSEB__)
-	au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
-#else
-	au_writel(0xf, Au1500_PCI_CFG);
-#endif
-	board_pci_idsel = mtx1_pci_idsel;
-#endif
-
 	/* Initialize sys_pinfunc */
 	au_writel(SYS_PF_NI2, SYS_PINFUNC);
 
@@ -104,23 +81,6 @@ void __init board_setup(void)
 	printk(KERN_INFO "4G Systems MTX-1 Board\n");
 }
 
-int
-mtx1_pci_idsel(unsigned int devsel, int assert)
-{
-	/* This function is only necessary to support a proprietary Cardbus
-	 * adapter on the mtx-1 "singleboard" variant. It triggers a custom
-	 * logic chip connected to EXT_IO3 (GPIO1) to suppress IDSEL signals.
-	 */
-	if (assert && devsel != 0)
-		/* Suppress signal to Cardbus */
-		alchemy_gpio_set_value(1, 0);	/* set EXT_IO3 OFF */
-	else
-		alchemy_gpio_set_value(1, 1);	/* set EXT_IO3 ON */
-
-	udelay(1);
-	return 1;
-}
-
 static int __init mtx1_init_irq(void)
 {
 	irq_set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH);

arch/mips/alchemy/mtx-1/platform.c

@@ -135,7 +135,69 @@ static struct platform_device mtx1_mtd = {
 	.resource	= &mtx1_mtd_resource,
 };
 
+static struct resource alchemy_pci_host_res[] = {
+	[0] = {
+		.start	= AU1500_PCI_PHYS_ADDR,
+		.end	= AU1500_PCI_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static int mtx1_pci_idsel(unsigned int devsel, int assert)
+{
+	/* This function is only necessary to support a proprietary Cardbus
+	 * adapter on the mtx-1 "singleboard" variant. It triggers a custom
+	 * logic chip connected to EXT_IO3 (GPIO1) to suppress IDSEL signals.
+	 */
+	if (assert && devsel != 0)
+		/* Suppress signal to Cardbus */
+		alchemy_gpio_set_value(1, 0);	/* set EXT_IO3 OFF */
+	else
+		alchemy_gpio_set_value(1, 1);	/* set EXT_IO3 ON */
+
+	udelay(1);
+	return 1;
+}
+
+static const char mtx1_irqtab[][5] = {
+	[0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 00 - AdapterA-Slot0 (top) */
+	[1] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
+	[2] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 02 - AdapterB-Slot0 (top) */
+	[3] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
+	[4] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 04 - AdapterC-Slot0 (top) */
+	[5] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
+	[6] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 06 - AdapterD-Slot0 (top) */
+	[7] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
+};
+
+static int mtx1_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+	return mtx1_irqtab[slot][pin];
+}
+
+static struct alchemy_pci_platdata mtx1_pci_pd = {
+	.board_map_irq	 = mtx1_map_pci_irq,
+	.board_pci_idsel = mtx1_pci_idsel,
+	.pci_cfg_set	 = PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H |
+			   PCI_CONFIG_CH |
+#if defined(__MIPSEB__)
+			   PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM,
+#else
+			   0,
+#endif
+};
+
+static struct platform_device mtx1_pci_host = {
+	.dev.platform_data = &mtx1_pci_pd,
+	.name		= "alchemy-pci",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(alchemy_pci_host_res),
+	.resource	= alchemy_pci_host_res,
+};
+
+
 static struct __initdata platform_device * mtx1_devs[] = {
+	&mtx1_pci_host,
 	&mtx1_gpio_leds,
 	&mtx1_wdt,
 	&mtx1_button,

arch/mips/alchemy/xxs1500/board_setup.c

@@ -70,14 +70,6 @@ void __init board_setup(void)
 	/* Enable DTR (MCR bit 0) = USB power up */
 	__raw_writel(1, (void __iomem *)KSEG1ADDR(AU1000_UART3_PHYS_ADDR + 0x18));
 	wmb();
-
-#ifdef CONFIG_PCI
-#if defined(__MIPSEB__)
-	au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
-#else
-	au_writel(0xf, Au1500_PCI_CFG);
-#endif
-#endif
 }
 
 static int __init xxs1500_init_irq(void)

arch/mips/alchemy/xxs1500/platform.c

@@ -27,20 +27,20 @@ static struct resource xxs1500_pcmcia_res[] = {
 	{
 		.name	= "pcmcia-io",
 		.flags	= IORESOURCE_MEM,
-		.start	= PCMCIA_IO_PHYS_ADDR,
-		.end	= PCMCIA_IO_PHYS_ADDR + 0x000400000 - 1,
+		.start	= AU1000_PCMCIA_IO_PHYS_ADDR,
+		.end	= AU1000_PCMCIA_IO_PHYS_ADDR + 0x000400000 - 1,
 	},
 	{
 		.name	= "pcmcia-attr",
 		.flags	= IORESOURCE_MEM,
-		.start	= PCMCIA_ATTR_PHYS_ADDR,
-		.end	= PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+		.start	= AU1000_PCMCIA_ATTR_PHYS_ADDR,
+		.end	= AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
 	},
 	{
 		.name	= "pcmcia-mem",
 		.flags	= IORESOURCE_MEM,
-		.start	= PCMCIA_MEM_PHYS_ADDR,
-		.end	= PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
+		.start	= AU1000_PCMCIA_MEM_PHYS_ADDR,
+		.end	= AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
 	},
 };
 

arch/mips/include/asm/cacheflush.h

@@ -114,4 +114,28 @@ unsigned long run_uncached(void *func);
 extern void *kmap_coherent(struct page *page, unsigned long addr);
 extern void kunmap_coherent(void);
 
+#define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE
+static inline void flush_kernel_dcache_page(struct page *page)
+{
+	BUG_ON(cpu_has_dc_aliases && PageHighMem(page));
+}
+
+/*
+ * For now flush_kernel_vmap_range and invalidate_kernel_vmap_range both do a
+ * cache writeback and invalidate operation.
+ */
+extern void (*__flush_kernel_vmap_range)(unsigned long vaddr, int size);
+
+static inline void flush_kernel_vmap_range(void *vaddr, int size)
+{
+	if (cpu_has_dc_aliases)
+		__flush_kernel_vmap_range((unsigned long) vaddr, size);
+}
+
+static inline void invalidate_kernel_vmap_range(void *vaddr, int size)
+{
+	if (cpu_has_dc_aliases)
+		__flush_kernel_vmap_range((unsigned long) vaddr, size);
+}
+
 #endif /* _ASM_CACHEFLUSH_H */

arch/mips/include/asm/cpu.h

@@ -135,6 +135,9 @@
 #define PRID_IMP_CAVIUM_CN50XX 0x0600
 #define PRID_IMP_CAVIUM_CN52XX 0x0700
 #define PRID_IMP_CAVIUM_CN63XX 0x9000
+#define PRID_IMP_CAVIUM_CN68XX 0x9100
+#define PRID_IMP_CAVIUM_CN66XX 0x9200
+#define PRID_IMP_CAVIUM_CN61XX 0x9300
 
 /*
  * These are the PRID's for when 23:16 == PRID_COMP_INGENIC

arch/mips/include/asm/io.h

@@ -329,14 +329,10 @@ static inline void pfx##write##bwlq(type val,				\
 			"dsrl32	%L0, %L0, 0"			"\n\t"	\
 			"dsll32	%M0, %M0, 0"			"\n\t"	\
 			"or	%L0, %L0, %M0"			"\n\t"	\
-			".set	push"				"\n\t"	\
-			".set	noreorder"			"\n\t"	\
-			".set	nomacro"			"\n\t"	\
 			"sd	%L0, %2"			"\n\t"	\
-			".set	pop"				"\n\t"	\
 			".set	mips0"				"\n"	\
 			: "=r" (__tmp)					\
-			: "0" (__val), "R" (*__mem));			\
+			: "0" (__val), "m" (*__mem));			\
 		if (irq)						\
 			local_irq_restore(__flags);			\
 	} else								\
@@ -359,16 +355,12 @@ static inline type pfx##read##bwlq(const volatile void __iomem *mem)	\
 			local_irq_save(__flags);			\
 		__asm__ __volatile__(					\
 			".set	mips3"		"\t\t# __readq"	"\n\t"	\
-			".set	push"				"\n\t"	\
-			".set	noreorder"			"\n\t"	\
-			".set	nomacro"			"\n\t"	\
 			"ld	%L0, %1"			"\n\t"	\
-			".set	pop"				"\n\t"	\
 			"dsra32	%M0, %L0, 0"			"\n\t"	\
 			"sll	%L0, %L0, 0"			"\n\t"	\
 			".set	mips0"				"\n"	\
 			: "=r" (__val)					\
-			: "R" (*__mem));				\
+			: "m" (*__mem));				\
 		if (irq)						\
 			local_irq_restore(__flags);			\
 	} else {							\

arch/mips/include/asm/mach-au1x00/au1xxx.h

-/*
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _AU1XXX_H_
-#define _AU1XXX_H_
-
-#include <asm/mach-au1x00/au1000.h>
-
-#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || \
-    defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550)
-#include <asm/mach-db1x00/db1x00.h>
-
-#elif defined(CONFIG_MIPS_PB1550)
-#include <asm/mach-pb1x00/pb1550.h>
-
-#elif defined(CONFIG_MIPS_PB1200)
-#include <asm/mach-pb1x00/pb1200.h>
-
-#elif defined(CONFIG_MIPS_DB1200)
-#include <asm/mach-db1x00/db1200.h>
-
-#endif
-
-#endif /* _AU1XXX_H_ */

arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h

@@ -126,66 +126,62 @@ typedef volatile struct au1xxx_ddma_desc {
 #define SW_STATUS_INUSE 	(1 << 0)
 
 /* Command 0 device IDs. */
-#ifdef CONFIG_SOC_AU1550
-#define DSCR_CMD0_UART0_TX	0
-#define DSCR_CMD0_UART0_RX	1
-#define DSCR_CMD0_UART3_TX	2
-#define DSCR_CMD0_UART3_RX	3
-#define DSCR_CMD0_DMA_REQ0	4
-#define DSCR_CMD0_DMA_REQ1	5
-#define DSCR_CMD0_DMA_REQ2	6
-#define DSCR_CMD0_DMA_REQ3	7
-#define DSCR_CMD0_USBDEV_RX0	8
-#define DSCR_CMD0_USBDEV_TX0	9
-#define DSCR_CMD0_USBDEV_TX1	10
-#define DSCR_CMD0_USBDEV_TX2	11
-#define DSCR_CMD0_USBDEV_RX3	12
-#define DSCR_CMD0_USBDEV_RX4	13
-#define DSCR_CMD0_PSC0_TX	14
-#define DSCR_CMD0_PSC0_RX	15
-#define DSCR_CMD0_PSC1_TX	16
-#define DSCR_CMD0_PSC1_RX	17
-#define DSCR_CMD0_PSC2_TX	18
-#define DSCR_CMD0_PSC2_RX	19
-#define DSCR_CMD0_PSC3_TX	20
-#define DSCR_CMD0_PSC3_RX	21
-#define DSCR_CMD0_PCI_WRITE	22
-#define DSCR_CMD0_NAND_FLASH	23
-#define DSCR_CMD0_MAC0_RX	24
-#define DSCR_CMD0_MAC0_TX	25
-#define DSCR_CMD0_MAC1_RX	26
-#define DSCR_CMD0_MAC1_TX	27
-#endif /* CONFIG_SOC_AU1550 */
-
-#ifdef CONFIG_SOC_AU1200
-#define DSCR_CMD0_UART0_TX	0
-#define DSCR_CMD0_UART0_RX	1
-#define DSCR_CMD0_UART1_TX	2
-#define DSCR_CMD0_UART1_RX	3
-#define DSCR_CMD0_DMA_REQ0	4
-#define DSCR_CMD0_DMA_REQ1	5
-#define DSCR_CMD0_MAE_BE	6
-#define DSCR_CMD0_MAE_FE	7
-#define DSCR_CMD0_SDMS_TX0	8
-#define DSCR_CMD0_SDMS_RX0	9
-#define DSCR_CMD0_SDMS_TX1	10
-#define DSCR_CMD0_SDMS_RX1	11
-#define DSCR_CMD0_AES_TX	13
-#define DSCR_CMD0_AES_RX	12
-#define DSCR_CMD0_PSC0_TX	14
-#define DSCR_CMD0_PSC0_RX	15
-#define DSCR_CMD0_PSC1_TX	16
-#define DSCR_CMD0_PSC1_RX	17
-#define DSCR_CMD0_CIM_RXA	18
-#define DSCR_CMD0_CIM_RXB	19
-#define DSCR_CMD0_CIM_RXC	20
-#define DSCR_CMD0_MAE_BOTH	21
-#define DSCR_CMD0_LCD		22
-#define DSCR_CMD0_NAND_FLASH	23
-#define DSCR_CMD0_PSC0_SYNC	24
-#define DSCR_CMD0_PSC1_SYNC	25
-#define DSCR_CMD0_CIM_SYNC	26
-#endif /* CONFIG_SOC_AU1200 */
+#define AU1550_DSCR_CMD0_UART0_TX	0
+#define AU1550_DSCR_CMD0_UART0_RX	1
+#define AU1550_DSCR_CMD0_UART3_TX	2
+#define AU1550_DSCR_CMD0_UART3_RX	3
+#define AU1550_DSCR_CMD0_DMA_REQ0	4
+#define AU1550_DSCR_CMD0_DMA_REQ1	5
+#define AU1550_DSCR_CMD0_DMA_REQ2	6
+#define AU1550_DSCR_CMD0_DMA_REQ3	7
+#define AU1550_DSCR_CMD0_USBDEV_RX0	8
+#define AU1550_DSCR_CMD0_USBDEV_TX0	9
+#define AU1550_DSCR_CMD0_USBDEV_TX1	10
+#define AU1550_DSCR_CMD0_USBDEV_TX2	11
+#define AU1550_DSCR_CMD0_USBDEV_RX3	12
+#define AU1550_DSCR_CMD0_USBDEV_RX4	13
+#define AU1550_DSCR_CMD0_PSC0_TX	14
+#define AU1550_DSCR_CMD0_PSC0_RX	15
+#define AU1550_DSCR_CMD0_PSC1_TX	16
+#define AU1550_DSCR_CMD0_PSC1_RX	17
+#define AU1550_DSCR_CMD0_PSC2_TX	18
+#define AU1550_DSCR_CMD0_PSC2_RX	19
+#define AU1550_DSCR_CMD0_PSC3_TX	20
+#define AU1550_DSCR_CMD0_PSC3_RX	21
+#define AU1550_DSCR_CMD0_PCI_WRITE	22
+#define AU1550_DSCR_CMD0_NAND_FLASH	23
+#define AU1550_DSCR_CMD0_MAC0_RX	24
+#define AU1550_DSCR_CMD0_MAC0_TX	25
+#define AU1550_DSCR_CMD0_MAC1_RX	26
+#define AU1550_DSCR_CMD0_MAC1_TX	27
+
+#define AU1200_DSCR_CMD0_UART0_TX	0
+#define AU1200_DSCR_CMD0_UART0_RX	1
+#define AU1200_DSCR_CMD0_UART1_TX	2
+#define AU1200_DSCR_CMD0_UART1_RX	3
+#define AU1200_DSCR_CMD0_DMA_REQ0	4
+#define AU1200_DSCR_CMD0_DMA_REQ1	5
+#define AU1200_DSCR_CMD0_MAE_BE		6
+#define AU1200_DSCR_CMD0_MAE_FE		7
+#define AU1200_DSCR_CMD0_SDMS_TX0	8
+#define AU1200_DSCR_CMD0_SDMS_RX0	9
+#define AU1200_DSCR_CMD0_SDMS_TX1	10
+#define AU1200_DSCR_CMD0_SDMS_RX1	11
+#define AU1200_DSCR_CMD0_AES_TX		13
+#define AU1200_DSCR_CMD0_AES_RX		12
+#define AU1200_DSCR_CMD0_PSC0_TX	14
+#define AU1200_DSCR_CMD0_PSC0_RX	15
+#define AU1200_DSCR_CMD0_PSC1_TX	16
+#define AU1200_DSCR_CMD0_PSC1_RX	17
+#define AU1200_DSCR_CMD0_CIM_RXA	18
+#define AU1200_DSCR_CMD0_CIM_RXB	19
+#define AU1200_DSCR_CMD0_CIM_RXC	20
+#define AU1200_DSCR_CMD0_MAE_BOTH	21
+#define AU1200_DSCR_CMD0_LCD		22
+#define AU1200_DSCR_CMD0_NAND_FLASH	23
+#define AU1200_DSCR_CMD0_PSC0_SYNC	24
+#define AU1200_DSCR_CMD0_PSC1_SYNC	25
+#define AU1200_DSCR_CMD0_CIM_SYNC	26
 
 #define DSCR_CMD0_THROTTLE	30
 #define DSCR_CMD0_ALWAYS	31

arch/mips/include/asm/mach-au1x00/au1xxx_ide.h

@@ -58,6 +58,7 @@ typedef struct {
 #endif
 	int			irq;
 	u32			regbase;
+	int			ddma_id;
 } _auide_hwif;
 
 /******************************************************************************/

arch/mips/include/asm/mach-au1x00/au1xxx_psc.h

@@ -33,19 +33,6 @@
 #ifndef _AU1000_PSC_H_
 #define _AU1000_PSC_H_
 
-/* The PSC base addresses.  */
-#ifdef CONFIG_SOC_AU1550
-#define PSC0_BASE_ADDR		0xb1a00000
-#define PSC1_BASE_ADDR		0xb1b00000
-#define PSC2_BASE_ADDR		0xb0a00000
-#define PSC3_BASE_ADDR		0xb0b00000
-#endif
-
-#ifdef CONFIG_SOC_AU1200
-#define PSC0_BASE_ADDR		0xb1a00000
-#define PSC1_BASE_ADDR		0xb1b00000
-#endif
-
 /*
  * The PSC select and control registers are common to all protocols.
  */
@@ -80,19 +67,6 @@
 #define PSC_AC97GPO_OFFSET	0x00000028
 #define PSC_AC97GPI_OFFSET	0x0000002c
 
-#define AC97_PSC_SEL		(AC97_PSC_BASE + PSC_SEL_OFFSET)
-#define AC97_PSC_CTRL		(AC97_PSC_BASE + PSC_CTRL_OFFSET)
-#define PSC_AC97CFG		(AC97_PSC_BASE + PSC_AC97CFG_OFFSET)
-#define PSC_AC97MSK		(AC97_PSC_BASE + PSC_AC97MSK_OFFSET)
-#define PSC_AC97PCR		(AC97_PSC_BASE + PSC_AC97PCR_OFFSET)
-#define PSC_AC97STAT		(AC97_PSC_BASE + PSC_AC97STAT_OFFSET)
-#define PSC_AC97EVNT		(AC97_PSC_BASE + PSC_AC97EVNT_OFFSET)
-#define PSC_AC97TXRX		(AC97_PSC_BASE + PSC_AC97TXRX_OFFSET)
-#define PSC_AC97CDC		(AC97_PSC_BASE + PSC_AC97CDC_OFFSET)
-#define PSC_AC97RST		(AC97_PSC_BASE + PSC_AC97RST_OFFSET)
-#define PSC_AC97GPO		(AC97_PSC_BASE + PSC_AC97GPO_OFFSET)
-#define PSC_AC97GPI		(AC97_PSC_BASE + PSC_AC97GPI_OFFSET)
-
 /* AC97 Config Register. */
 #define PSC_AC97CFG_RT_MASK	(3 << 30)
 #define PSC_AC97CFG_RT_FIFO1	(0 << 30)

arch/mips/include/asm/mach-au1x00/gpio-au1000.h

@@ -347,17 +347,6 @@ static inline int alchemy_gpio2_to_irq(int gpio)
 
 /**********************************************************************/
 
-/* On Au1000, Au1500 and Au1100 GPIOs won't work as inputs before
- * SYS_PININPUTEN is written to at least once.  On Au1550/Au1200 this
- * register enables use of GPIOs as wake source.
- */
-static inline void alchemy_gpio1_input_enable(void)
-{
-	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
-	__raw_writel(0, base + SYS_PININPUTEN);	/* the write op is key */
-	wmb();
-}
-
 /* GPIO2 shared interrupts and control */
 
 static inline void __alchemy_gpio2_mod_int(int gpio2, int en)
@@ -561,6 +550,7 @@ static inline int alchemy_irq_to_gpio(int irq)
 
 #ifndef CONFIG_GPIOLIB
 
+#ifdef CONFIG_ALCHEMY_GPIOINT_AU1000
 
 #ifndef CONFIG_ALCHEMY_GPIO_INDIRECT	/* case (4) */
 
@@ -665,24 +655,7 @@ static inline void gpio_unexport(unsigned gpio)
 
 #endif	/* !CONFIG_ALCHEMY_GPIO_INDIRECT */
 
-
-#else	/* CONFIG GPIOLIB */
-
-
- /* using gpiolib to provide up to 2 gpio_chips for on-chip gpios */
-#ifndef CONFIG_ALCHEMY_GPIO_INDIRECT	/* case (2) */
-
-/* get everything through gpiolib */
-#define gpio_to_irq	__gpio_to_irq
-#define gpio_get_value	__gpio_get_value
-#define gpio_set_value	__gpio_set_value
-#define gpio_cansleep	__gpio_cansleep
-#define irq_to_gpio	alchemy_irq_to_gpio
-
-#include <asm-generic/gpio.h>
-
-#endif	/* !CONFIG_ALCHEMY_GPIO_INDIRECT */
-
+#endif	/* CONFIG_ALCHEMY_GPIOINT_AU1000 */
 
 #endif	/* !CONFIG_GPIOLIB */
 

arch/mips/include/asm/mach-au1x00/gpio.h

+/*
+ * Alchemy GPIO support.
+ *
+ * With CONFIG_GPIOLIB=y different types of on-chip GPIO can be supported within
+ *  the same kernel image.
+ * With CONFIG_GPIOLIB=n, your board must select ALCHEMY_GPIOINT_AU1XXX for the
+ *  appropriate CPU type (AU1000 currently).
+ */
+
 #ifndef _ALCHEMY_GPIO_H_
 #define _ALCHEMY_GPIO_H_
 
-#if defined(CONFIG_ALCHEMY_GPIOINT_AU1000)
-
+#include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/gpio-au1000.h>
 
-#endif
+/* On Au1000, Au1500 and Au1100 GPIOs won't work as inputs before
+ * SYS_PININPUTEN is written to at least once.  On Au1550/Au1200/Au1300 this
+ * register enables use of GPIOs as wake source.
+ */
+static inline void alchemy_gpio1_input_enable(void)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
+	__raw_writel(0, base + 0x110);		/* the write op is key */
+	wmb();
+}
+
+
+/* Linux gpio framework integration.
+*
+* 4 use cases of Alchemy GPIOS:
+*(1) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=y:
+*	Board must register gpiochips.
+*(2) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=n:
+*	A gpiochip for the 75 GPIOs is registered.
+*
+*(3) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=y:
+*	the boards' gpio.h must provide	the linux gpio wrapper functions,
+*
+*(4) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=n:
+*	inlinable gpio functions are provided which enable access to the
+*	Au1300 gpios only by using the numbers straight out of the data-
+*	sheets.
+
+* Cases 1 and 3 are intended for boards which want to provide their own
+* GPIO namespace and -operations (i.e. for example you have 8 GPIOs
+* which are in part provided by spare Au1300 GPIO pins and in part by
+* an external FPGA but you still want them to be accssible in linux
+* as gpio0-7. The board can of course use the alchemy_gpioX_* functions
+* as required).
+*/
+
+#ifdef CONFIG_GPIOLIB
+
+/* wraps the cpu-dependent irq_to_gpio functions */
+/* FIXME: gpiolib needs an irq_to_gpio hook */
+static inline int __au_irq_to_gpio(unsigned int irq)
+{
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000...ALCHEMY_CPU_AU1200:
+		return alchemy_irq_to_gpio(irq);
+	}
+	return -EINVAL;
+}
+
+
+/* using gpiolib to provide up to 2 gpio_chips for on-chip gpios */
+#ifndef CONFIG_ALCHEMY_GPIO_INDIRECT	/* case (2) */
+
+/* get everything through gpiolib */
+#define gpio_to_irq	__gpio_to_irq
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define irq_to_gpio	__au_irq_to_gpio
+
+#include <asm-generic/gpio.h>
+
+#endif	/* !CONFIG_ALCHEMY_GPIO_INDIRECT */
+
+
+#endif	/* CONFIG_GPIOLIB */
 
 #endif	/* _ALCHEMY_GPIO_H_ */

arch/mips/include/asm/mach-db1x00/db1200.h

@@ -46,8 +46,6 @@
 
 #define IDE_PHYS_ADDR		0x18800000
 #define IDE_REG_SHIFT		5
-#define IDE_DDMA_REQ		DSCR_CMD0_DMA_REQ1
-#define IDE_RQSIZE		128
 
 #define DB1200_IDE_PHYS_ADDR	IDE_PHYS_ADDR
 #define DB1200_IDE_PHYS_LEN	(16 << IDE_REG_SHIFT)

arch/mips/include/asm/mach-db1x00/db1x00.h

@@ -31,15 +31,15 @@
 
 #ifdef CONFIG_MIPS_DB1550
 
-#define DBDMA_AC97_TX_CHAN	DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN	DSCR_CMD0_PSC1_RX
-#define DBDMA_I2S_TX_CHAN	DSCR_CMD0_PSC3_TX
-#define DBDMA_I2S_RX_CHAN	DSCR_CMD0_PSC3_RX
+#define DBDMA_AC97_TX_CHAN	AU1550_DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN	AU1550_DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN	AU1550_DSCR_CMD0_PSC3_TX
+#define DBDMA_I2S_RX_CHAN	AU1550_DSCR_CMD0_PSC3_RX
 
-#define SPI_PSC_BASE		PSC0_BASE_ADDR
-#define AC97_PSC_BASE		PSC1_BASE_ADDR
-#define SMBUS_PSC_BASE		PSC2_BASE_ADDR
-#define I2S_PSC_BASE		PSC3_BASE_ADDR
+#define SPI_PSC_BASE		AU1550_PSC0_PHYS_ADDR
+#define AC97_PSC_BASE		AU1550_PSC1_PHYS_ADDR
+#define SMBUS_PSC_BASE		AU1550_PSC2_PHYS_ADDR
+#define I2S_PSC_BASE		AU1550_PSC3_PHYS_ADDR
 
 #define NAND_PHYS_ADDR		0x20000000
 

arch/mips/include/asm/mach-pb1x00/pb1200.h

@@ -28,23 +28,23 @@
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1xxx_psc.h>
 
-#define DBDMA_AC97_TX_CHAN	DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN	DSCR_CMD0_PSC1_RX
-#define DBDMA_I2S_TX_CHAN	DSCR_CMD0_PSC1_TX
-#define DBDMA_I2S_RX_CHAN	DSCR_CMD0_PSC1_RX
+#define DBDMA_AC97_TX_CHAN	AU1200_DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN	AU1200_DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN	AU1200_DSCR_CMD0_PSC1_TX
+#define DBDMA_I2S_RX_CHAN	AU1200_DSCR_CMD0_PSC1_RX
 
 /*
  * SPI and SMB are muxed on the Pb1200 board.
  * Refer to board documentation.
  */
-#define SPI_PSC_BASE		PSC0_BASE_ADDR
-#define SMBUS_PSC_BASE		PSC0_BASE_ADDR
+#define SPI_PSC_BASE		AU1550_PSC0_PHYS_ADDR
+#define SMBUS_PSC_BASE		AU1550_PSC0_PHYS_ADDR
 /*
  * AC97 and I2S are muxed on the Pb1200 board.
  * Refer to board documentation.
  */
-#define AC97_PSC_BASE       PSC1_BASE_ADDR
-#define I2S_PSC_BASE	PSC1_BASE_ADDR
+#define AC97_PSC_BASE       AU1550_PSC1_PHYS_ADDR
+#define I2S_PSC_BASE	AU1550_PSC1_PHYS_ADDR
 
 
 #define BCSR_SYSTEM_VDDI	0x001F
@@ -76,8 +76,6 @@
 #define IDE_REG_SHIFT		5
 #define IDE_PHYS_LEN		(16 << IDE_REG_SHIFT)
 #define IDE_INT 		PB1200_IDE_INT
-#define IDE_DDMA_REQ		DSCR_CMD0_DMA_REQ1
-#define IDE_RQSIZE		128
 
 #define NAND_PHYS_ADDR 	0x1C000000
 

arch/mips/include/asm/mach-pb1x00/pb1550.h

@@ -30,15 +30,15 @@
 #include <linux/types.h>
 #include <asm/mach-au1x00/au1xxx_psc.h>
 
-#define DBDMA_AC97_TX_CHAN	DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN	DSCR_CMD0_PSC1_RX
-#define DBDMA_I2S_TX_CHAN	DSCR_CMD0_PSC3_TX
-#define DBDMA_I2S_RX_CHAN	DSCR_CMD0_PSC3_RX
+#define DBDMA_AC97_TX_CHAN	AU1550_DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN	AU1550_DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN	AU1550_DSCR_CMD0_PSC3_TX
+#define DBDMA_I2S_RX_CHAN	AU1550_DSCR_CMD0_PSC3_RX
 
-#define SPI_PSC_BASE		PSC0_BASE_ADDR
-#define AC97_PSC_BASE		PSC1_BASE_ADDR
-#define SMBUS_PSC_BASE		PSC2_BASE_ADDR
-#define I2S_PSC_BASE		PSC3_BASE_ADDR
+#define SPI_PSC_BASE		AU1550_PSC0_PHYS_ADDR
+#define AC97_PSC_BASE		AU1550_PSC1_PHYS_ADDR
+#define SMBUS_PSC_BASE		AU1550_PSC2_PHYS_ADDR
+#define I2S_PSC_BASE		AU1550_PSC3_PHYS_ADDR
 
 /*
  * Timing values as described in databook, * ns value stripped of

arch/mips/include/asm/mipsprom.h

-#ifndef __ASM_MIPS_PROM_H
-#define __ASM_MIPS_PROM_H
+#ifndef __ASM_MIPSPROM_H
+#define __ASM_MIPSPROM_H
 
 #define PROM_RESET		0
 #define PROM_EXEC		1
@@ -73,4 +73,4 @@
 
 extern char *prom_getenv(char *);
 
-#endif /* __ASM_MIPS_PROM_H */
+#endif /* __ASM_MIPSPROM_H */

arch/mips/include/asm/mipsregs.h

@@ -1006,18 +1006,26 @@ do {									\
 #define write_c0_perfctrl0(val)	__write_32bit_c0_register($25, 0, val)
 #define read_c0_perfcntr0()	__read_32bit_c0_register($25, 1)
 #define write_c0_perfcntr0(val)	__write_32bit_c0_register($25, 1, val)
+#define read_c0_perfcntr0_64()	__read_64bit_c0_register($25, 1)
+#define write_c0_perfcntr0_64(val) __write_64bit_c0_register($25, 1, val)
 #define read_c0_perfctrl1()	__read_32bit_c0_register($25, 2)
 #define write_c0_perfctrl1(val)	__write_32bit_c0_register($25, 2, val)
 #define read_c0_perfcntr1()	__read_32bit_c0_register($25, 3)
 #define write_c0_perfcntr1(val)	__write_32bit_c0_register($25, 3, val)
+#define read_c0_perfcntr1_64()	__read_64bit_c0_register($25, 3)
+#define write_c0_perfcntr1_64(val) __write_64bit_c0_register($25, 3, val)
 #define read_c0_perfctrl2()	__read_32bit_c0_register($25, 4)
 #define write_c0_perfctrl2(val)	__write_32bit_c0_register($25, 4, val)
 #define read_c0_perfcntr2()	__read_32bit_c0_register($25, 5)
 #define write_c0_perfcntr2(val)	__write_32bit_c0_register($25, 5, val)
+#define read_c0_perfcntr2_64()	__read_64bit_c0_register($25, 5)
+#define write_c0_perfcntr2_64(val) __write_64bit_c0_register($25, 5, val)
 #define read_c0_perfctrl3()	__read_32bit_c0_register($25, 6)
 #define write_c0_perfctrl3(val)	__write_32bit_c0_register($25, 6, val)
 #define read_c0_perfcntr3()	__read_32bit_c0_register($25, 7)
 #define write_c0_perfcntr3(val)	__write_32bit_c0_register($25, 7, val)
+#define read_c0_perfcntr3_64()	__read_64bit_c0_register($25, 7)
+#define write_c0_perfcntr3_64(val) __write_64bit_c0_register($25, 7, val)
 
 /* RM9000 PerfCount performance counter register */
 #define read_c0_perfcount()	__read_64bit_c0_register($25, 0)

arch/mips/include/asm/prom.h

@@ -8,8 +8,8 @@
  * published by the Free Software Foundation.
  *
  */
-#ifndef __ASM_MIPS_PROM_H
-#define __ASM_MIPS_PROM_H
+#ifndef __ASM_PROM_H
+#define __ASM_PROM_H
 
 #ifdef CONFIG_OF
 #include <asm/bootinfo.h>
@@ -25,4 +25,4 @@ extern void device_tree_init(void);
 static inline void device_tree_init(void) { }
 #endif /* CONFIG_OF */
 
-#endif /* _ASM_MIPS_PROM_H */
+#endif /* __ASM_PROM_H */

arch/mips/include/asm/regdef.h

@@ -6,6 +6,8 @@
  * Copyright (C) 1985 MIPS Computer Systems, Inc.
  * Copyright (C) 1994, 95, 99, 2003 by Ralf Baechle
  * Copyright (C) 1990 - 1992, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 2011 Wind River Systems,
+ *   written by Ralf Baechle <ralf@linux-mips.org>
  */
 #ifndef _ASM_REGDEF_H
 #define _ASM_REGDEF_H
@@ -30,9 +32,13 @@
 #define t2      $10
 #define t3      $11
 #define t4      $12
+#define ta0	$12
 #define t5      $13
+#define ta1	$13
 #define t6      $14
+#define ta2	$14
 #define t7      $15
+#define ta3	$15
 #define s0      $16     /* callee saved */
 #define s1      $17
 #define s2      $18

arch/mips/jz4740/gpio.c

@@ -17,8 +17,6 @@
 #include <linux/module.h>
 #include <linux/init.h>
 
-#include <linux/spinlock.h>
-#include <linux/syscore_ops.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/delay.h>
@@ -30,6 +28,8 @@
 
 #include <asm/mach-jz4740/base.h>
 
+#include "irq.h"
+
 #define JZ4740_GPIO_BASE_A (32*0)
 #define JZ4740_GPIO_BASE_B (32*1)
 #define JZ4740_GPIO_BASE_C (32*2)
@@ -77,14 +77,10 @@
 struct jz_gpio_chip {
 	unsigned int irq;
 	unsigned int irq_base;
-	uint32_t wakeup;
-	uint32_t suspend_mask;
 	uint32_t edge_trigger_both;
 
 	void __iomem *base;
 
-	spinlock_t lock;
-
 	struct gpio_chip gpio_chip;
 };
 
@@ -102,7 +98,8 @@ static inline struct jz_gpio_chip *gpio_chip_to_jz_gpio_chip(struct gpio_chip *g
 
 static inline struct jz_gpio_chip *irq_to_jz_gpio_chip(struct irq_data *data)
 {
-	return irq_data_get_irq_chip_data(data);
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
+	return gc->private;
 }
 
 static inline void jz_gpio_write_bit(unsigned int gpio, unsigned int reg)
@@ -304,21 +301,15 @@ static void jz_gpio_irq_demux_handler(unsigned int irq, struct irq_desc *desc)
 {
 	uint32_t flag;
 	unsigned int gpio_irq;
-	unsigned int gpio_bank;
 	struct jz_gpio_chip *chip = irq_desc_get_handler_data(desc);
 
-	gpio_bank = JZ4740_IRQ_GPIO0 - irq;
-
 	flag = readl(chip->base + JZ_REG_GPIO_FLAG);
-
 	if (!flag)
 		return;
 
-	gpio_irq = __fls(flag);
+	gpio_irq = chip->irq_base + __fls(flag);
 
-	jz_gpio_check_trigger_both(chip, irq);
-
-	gpio_irq += (gpio_bank << 5) + JZ4740_IRQ_GPIO(0);
+	jz_gpio_check_trigger_both(chip, gpio_irq);
 
 	generic_handle_irq(gpio_irq);
 };
@@ -329,18 +320,12 @@ static inline void jz_gpio_set_irq_bit(struct irq_data *data, unsigned int reg)
 	writel(IRQ_TO_BIT(data->irq), chip->base + reg);
 }
 
-static void jz_gpio_irq_mask(struct irq_data *data)
-{
-	jz_gpio_set_irq_bit(data, JZ_REG_GPIO_MASK_SET);
-};
-
 static void jz_gpio_irq_unmask(struct irq_data *data)
 {
 	struct jz_gpio_chip *chip = irq_to_jz_gpio_chip(data);
 
 	jz_gpio_check_trigger_both(chip, data->irq);
-
-	jz_gpio_set_irq_bit(data, JZ_REG_GPIO_MASK_CLEAR);
+	irq_gc_unmask_enable_reg(data);
 };
 
 /* TODO: Check if function is gpio */
@@ -353,18 +338,13 @@ static unsigned int jz_gpio_irq_startup(struct irq_data *data)
 
 static void jz_gpio_irq_shutdown(struct irq_data *data)
 {
-	jz_gpio_irq_mask(data);
+	irq_gc_mask_disable_reg(data);
 
 	/* Set direction to input */
 	jz_gpio_set_irq_bit(data, JZ_REG_GPIO_DIRECTION_CLEAR);
 	jz_gpio_set_irq_bit(data, JZ_REG_GPIO_SELECT_CLEAR);
 }
 
-static void jz_gpio_irq_ack(struct irq_data *data)
-{
-	jz_gpio_set_irq_bit(data, JZ_REG_GPIO_FLAG_CLEAR);
-};
-
 static int jz_gpio_irq_set_type(struct irq_data *data, unsigned int flow_type)
 {
 	struct jz_gpio_chip *chip = irq_to_jz_gpio_chip(data);
@@ -408,35 +388,13 @@ static int jz_gpio_irq_set_type(struct irq_data *data, unsigned int flow_type)
 static int jz_gpio_irq_set_wake(struct irq_data *data, unsigned int on)
 {
 	struct jz_gpio_chip *chip = irq_to_jz_gpio_chip(data);
-	spin_lock(&chip->lock);
-	if (on)
-		chip->wakeup |= IRQ_TO_BIT(data->irq);
-	else
-		chip->wakeup &= ~IRQ_TO_BIT(data->irq);
-	spin_unlock(&chip->lock);
 
+	irq_gc_set_wake(data, on);
 	irq_set_irq_wake(chip->irq, on);
+
 	return 0;
 }
 
-static struct irq_chip jz_gpio_irq_chip = {
-	.name = "GPIO",
-	.irq_mask = jz_gpio_irq_mask,
-	.irq_unmask = jz_gpio_irq_unmask,
-	.irq_ack = jz_gpio_irq_ack,
-	.irq_startup = jz_gpio_irq_startup,
-	.irq_shutdown = jz_gpio_irq_shutdown,
-	.irq_set_type = jz_gpio_irq_set_type,
-	.irq_set_wake = jz_gpio_irq_set_wake,
-	.flags = IRQCHIP_SET_TYPE_MASKED,
-};
-
-/*
- * This lock class tells lockdep that GPIO irqs are in a different
- * category than their parents, so it won't report false recursion.
- */
-static struct lock_class_key gpio_lock_class;
-
 #define JZ4740_GPIO_CHIP(_bank) { \
 	.irq_base = JZ4740_IRQ_GPIO_BASE_ ## _bank, \
 	.gpio_chip = { \
@@ -458,64 +416,44 @@ static struct jz_gpio_chip jz4740_gpio_chips[] = {
 	JZ4740_GPIO_CHIP(D),
 };
 
-static void jz4740_gpio_suspend_chip(struct jz_gpio_chip *chip)
-{
-	chip->suspend_mask = readl(chip->base + JZ_REG_GPIO_MASK);
-	writel(~(chip->wakeup), chip->base + JZ_REG_GPIO_MASK_SET);
-	writel(chip->wakeup, chip->base + JZ_REG_GPIO_MASK_CLEAR);
-}
-
-static int jz4740_gpio_suspend(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(jz4740_gpio_chips); i++)
-		jz4740_gpio_suspend_chip(&jz4740_gpio_chips[i]);
-
-	return 0;
-}
-
-static void jz4740_gpio_resume_chip(struct jz_gpio_chip *chip)
+static void jz4740_gpio_chip_init(struct jz_gpio_chip *chip, unsigned int id)
 {
-	uint32_t mask = chip->suspend_mask;
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
 
-	writel(~mask, chip->base + JZ_REG_GPIO_MASK_CLEAR);
-	writel(mask, chip->base + JZ_REG_GPIO_MASK_SET);
-}
+	chip->base = ioremap(JZ4740_GPIO_BASE_ADDR + (id * 0x100), 0x100);
 
-static void jz4740_gpio_resume(void)
-{
-	int i;
+	chip->irq = JZ4740_IRQ_INTC_GPIO(id);
+	irq_set_handler_data(chip->irq, chip);
+	irq_set_chained_handler(chip->irq, jz_gpio_irq_demux_handler);
 
-	for (i = ARRAY_SIZE(jz4740_gpio_chips) - 1; i >= 0 ; i--)
-		jz4740_gpio_resume_chip(&jz4740_gpio_chips[i]);
-}
+	gc = irq_alloc_generic_chip(chip->gpio_chip.label, 1, chip->irq_base,
+		chip->base, handle_level_irq);
 
-static struct syscore_ops jz4740_gpio_syscore_ops = {
-	.suspend = jz4740_gpio_suspend,
-	.resume = jz4740_gpio_resume,
-};
+	gc->wake_enabled = IRQ_MSK(chip->gpio_chip.ngpio);
+	gc->private = chip;
 
-static void jz4740_gpio_chip_init(struct jz_gpio_chip *chip, unsigned int id)
-{
-	int irq;
+	ct = gc->chip_types;
+	ct->regs.enable = JZ_REG_GPIO_MASK_CLEAR;
+	ct->regs.disable = JZ_REG_GPIO_MASK_SET;
+	ct->regs.ack = JZ_REG_GPIO_FLAG_CLEAR;
 
-	spin_lock_init(&chip->lock);
+	ct->chip.name = "GPIO";
+	ct->chip.irq_mask = irq_gc_mask_disable_reg;
+	ct->chip.irq_unmask = jz_gpio_irq_unmask;
+	ct->chip.irq_ack = irq_gc_ack_set_bit;
+	ct->chip.irq_suspend = jz4740_irq_suspend;
+	ct->chip.irq_resume = jz4740_irq_resume;
+	ct->chip.irq_startup = jz_gpio_irq_startup;
+	ct->chip.irq_shutdown = jz_gpio_irq_shutdown;
+	ct->chip.irq_set_type = jz_gpio_irq_set_type;
+	ct->chip.irq_set_wake = jz_gpio_irq_set_wake;
+	ct->chip.flags = IRQCHIP_SET_TYPE_MASKED;
 
-	chip->base = ioremap(JZ4740_GPIO_BASE_ADDR + (id * 0x100), 0x100);
+	irq_setup_generic_chip(gc, IRQ_MSK(chip->gpio_chip.ngpio),
+		IRQ_GC_INIT_NESTED_LOCK, 0, IRQ_NOPROBE | IRQ_LEVEL);
 
 	gpiochip_add(&chip->gpio_chip);
-
-	chip->irq = JZ4740_IRQ_INTC_GPIO(id);
-	irq_set_handler_data(chip->irq, chip);
-	irq_set_chained_handler(chip->irq, jz_gpio_irq_demux_handler);
-
-	for (irq = chip->irq_base; irq < chip->irq_base + chip->gpio_chip.ngpio; ++irq) {
-		irq_set_lockdep_class(irq, &gpio_lock_class);
-		irq_set_chip_data(irq, chip);
-		irq_set_chip_and_handler(irq, &jz_gpio_irq_chip,
-					 handle_level_irq);
-	}
 }
 
 static int __init jz4740_gpio_init(void)
@@ -525,8 +463,6 @@ static int __init jz4740_gpio_init(void)
 	for (i = 0; i < ARRAY_SIZE(jz4740_gpio_chips); ++i)
 		jz4740_gpio_chip_init(&jz4740_gpio_chips[i], i);
 
-	register_syscore_ops(&jz4740_gpio_syscore_ops);
-
 	printk(KERN_INFO "JZ4740 GPIO initialized\n");
 
 	return 0;

arch/mips/jz4740/irq.c

@@ -32,8 +32,6 @@
 #include <asm/mach-jz4740/base.h>
 
 static void __iomem *jz_intc_base;
-static uint32_t jz_intc_wakeup;
-static uint32_t jz_intc_saved;
 
 #define JZ_REG_INTC_STATUS	0x00
 #define JZ_REG_INTC_MASK	0x04
@@ -41,51 +39,36 @@ static uint32_t jz_intc_saved;
 #define JZ_REG_INTC_CLEAR_MASK	0x0c
 #define JZ_REG_INTC_PENDING	0x10
 
-#define IRQ_BIT(x) BIT((x) - JZ4740_IRQ_BASE)
-
-static inline unsigned long intc_irq_bit(struct irq_data *data)
+static irqreturn_t jz4740_cascade(int irq, void *data)
 {
-	return (unsigned long)irq_data_get_irq_chip_data(data);
-}
+	uint32_t irq_reg;
 
-static void intc_irq_unmask(struct irq_data *data)
-{
-	writel(intc_irq_bit(data), jz_intc_base + JZ_REG_INTC_CLEAR_MASK);
-}
+	irq_reg = readl(jz_intc_base + JZ_REG_INTC_PENDING);
 
-static void intc_irq_mask(struct irq_data *data)
-{
-	writel(intc_irq_bit(data), jz_intc_base + JZ_REG_INTC_SET_MASK);
+	if (irq_reg)
+		generic_handle_irq(__fls(irq_reg) + JZ4740_IRQ_BASE);
+
+	return IRQ_HANDLED;
 }
 
-static int intc_irq_set_wake(struct irq_data *data, unsigned int on)
+static void jz4740_irq_set_mask(struct irq_chip_generic *gc, uint32_t mask)
 {
-	if (on)
-		jz_intc_wakeup |= intc_irq_bit(data);
-	else
-		jz_intc_wakeup &= ~intc_irq_bit(data);
+	struct irq_chip_regs *regs = &gc->chip_types->regs;
 
-	return 0;
+	writel(mask, gc->reg_base + regs->enable);
+	writel(~mask, gc->reg_base + regs->disable);
 }
 
-static struct irq_chip intc_irq_type = {
-	.name =		"INTC",
-	.irq_mask =	intc_irq_mask,
-	.irq_mask_ack =	intc_irq_mask,
-	.irq_unmask =	intc_irq_unmask,
-	.irq_set_wake =	intc_irq_set_wake,
-};
-
-static irqreturn_t jz4740_cascade(int irq, void *data)
+void jz4740_irq_suspend(struct irq_data *data)
 {
-	uint32_t irq_reg;
-
-	irq_reg = readl(jz_intc_base + JZ_REG_INTC_PENDING);
-
-	if (irq_reg)
-		generic_handle_irq(__fls(irq_reg) + JZ4740_IRQ_BASE);
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
+	jz4740_irq_set_mask(gc, gc->wake_active);
+}
 
-	return IRQ_HANDLED;
+void jz4740_irq_resume(struct irq_data *data)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
+	jz4740_irq_set_mask(gc, gc->mask_cache);
 }
 
 static struct irqaction jz4740_cascade_action = {
@@ -95,7 +78,9 @@ static struct irqaction jz4740_cascade_action = {
 
 void __init arch_init_irq(void)
 {
-	int i;
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+
 	mips_cpu_irq_init();
 
 	jz_intc_base = ioremap(JZ4740_INTC_BASE_ADDR, 0x14);
@@ -103,10 +88,22 @@ void __init arch_init_irq(void)
 	/* Mask all irqs */
 	writel(0xffffffff, jz_intc_base + JZ_REG_INTC_SET_MASK);
 
-	for (i = JZ4740_IRQ_BASE; i < JZ4740_IRQ_BASE + 32; i++) {
-		irq_set_chip_data(i, (void *)IRQ_BIT(i));
-		irq_set_chip_and_handler(i, &intc_irq_type, handle_level_irq);
-	}
+	gc = irq_alloc_generic_chip("INTC", 1, JZ4740_IRQ_BASE, jz_intc_base,
+		handle_level_irq);
+
+	gc->wake_enabled = IRQ_MSK(32);
+
+	ct = gc->chip_types;
+	ct->regs.enable = JZ_REG_INTC_CLEAR_MASK;
+	ct->regs.disable = JZ_REG_INTC_SET_MASK;
+	ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
+	ct->chip.irq_mask = irq_gc_mask_disable_reg;
+	ct->chip.irq_mask_ack = irq_gc_mask_disable_reg;
+	ct->chip.irq_set_wake = irq_gc_set_wake;
+	ct->chip.irq_suspend = jz4740_irq_suspend;
+	ct->chip.irq_resume = jz4740_irq_resume;
+
+	irq_setup_generic_chip(gc, IRQ_MSK(32), 0, 0, IRQ_NOPROBE | IRQ_LEVEL);
 
 	setup_irq(2, &jz4740_cascade_action);
 }
@@ -122,19 +119,6 @@ asmlinkage void plat_irq_dispatch(void)
 		spurious_interrupt();
 }
 
-void jz4740_intc_suspend(void)
-{
-	jz_intc_saved = readl(jz_intc_base + JZ_REG_INTC_MASK);
-	writel(~jz_intc_wakeup, jz_intc_base + JZ_REG_INTC_SET_MASK);
-	writel(jz_intc_wakeup, jz_intc_base + JZ_REG_INTC_CLEAR_MASK);
-}
-
-void jz4740_intc_resume(void)
-{
-	writel(~jz_intc_saved, jz_intc_base + JZ_REG_INTC_CLEAR_MASK);
-	writel(jz_intc_saved, jz_intc_base + JZ_REG_INTC_SET_MASK);
-}
-
 #ifdef CONFIG_DEBUG_FS
 
 static inline void intc_seq_reg(struct seq_file *s, const char *name,

arch/mips/jz4740/irq.h

@@ -15,7 +15,9 @@
 #ifndef __MIPS_JZ4740_IRQ_H__
 #define __MIPS_JZ4740_IRQ_H__
 
-extern void jz4740_intc_suspend(void);
-extern void jz4740_intc_resume(void);
+#include <linux/irq.h>
+
+extern void jz4740_irq_suspend(struct irq_data *data);
+extern void jz4740_irq_resume(struct irq_data *data);
 
 #endif

arch/mips/jz4740/pm.c

@@ -21,11 +21,9 @@
 #include <asm/mach-jz4740/clock.h>
 
 #include "clock.h"
-#include "irq.h"
 
 static int jz4740_pm_enter(suspend_state_t state)
 {
-	jz4740_intc_suspend();
 	jz4740_clock_suspend();
 
 	jz4740_clock_set_wait_mode(JZ4740_WAIT_MODE_SLEEP);
@@ -37,7 +35,6 @@ static int jz4740_pm_enter(suspend_state_t state)
 	jz4740_clock_set_wait_mode(JZ4740_WAIT_MODE_IDLE);
 
 	jz4740_clock_resume();
-	jz4740_intc_resume();
 
 	return 0;
 }

arch/mips/kernel/Makefile

@@ -11,6 +11,8 @@ obj-y		+= cpu-probe.o branch.o entry.o genex.o irq.o process.o \
 ifdef CONFIG_FUNCTION_TRACER
 CFLAGS_REMOVE_ftrace.o = -pg
 CFLAGS_REMOVE_early_printk.o = -pg
+CFLAGS_REMOVE_perf_event.o = -pg
+CFLAGS_REMOVE_perf_event_mipsxx.o = -pg
 endif
 
 obj-$(CONFIG_CEVT_BCM1480)	+= cevt-bcm1480.o
@@ -106,7 +108,8 @@ obj-$(CONFIG_HAVE_STD_PC_SERIAL_PORT)	+= 8250-platform.o
 
 obj-$(CONFIG_MIPS_CPUFREQ)	+= cpufreq/
 
-obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event.o
+obj-$(CONFIG_PERF_EVENTS)	+= perf_event.o
+obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event_mipsxx.o
 
 obj-$(CONFIG_JUMP_LABEL)	+= jump_label.o
 

arch/mips/kernel/cpu-probe.c

@@ -978,7 +978,10 @@ static inline void cpu_probe_cavium(struct cpuinfo_mips *c, unsigned int cpu)
 platform:
 		set_elf_platform(cpu, "octeon");
 		break;
+	case PRID_IMP_CAVIUM_CN61XX:
 	case PRID_IMP_CAVIUM_CN63XX:
+	case PRID_IMP_CAVIUM_CN66XX:
+	case PRID_IMP_CAVIUM_CN68XX:
 		c->cputype = CPU_CAVIUM_OCTEON2;
 		__cpu_name[cpu] = "Cavium Octeon II";
 		set_elf_platform(cpu, "octeon2");

arch/mips/kernel/scall32-o32.S

@@ -496,7 +496,7 @@ einval:	li	v0, -ENOSYS
 	sys	sys_lookup_dcookie	4
 	sys	sys_epoll_create	1
 	sys	sys_epoll_ctl		4
-	sys	sys_epoll_wait		3	/* 4250 */
+	sys	sys_epoll_wait		4	/* 4250 */
 	sys	sys_remap_file_pages	5
 	sys	sys_set_tid_address	1
 	sys	sys_restart_syscall	0

arch/mips/mm/c-octeon.c

@@ -169,6 +169,10 @@ static void octeon_flush_cache_page(struct vm_area_struct *vma,
 		octeon_flush_icache_all_cores(vma);
 }
 
+static void octeon_flush_kernel_vmap_range(unsigned long vaddr, int size)
+{
+	BUG();
+}
 
 /**
  * Probe Octeon's caches
@@ -273,6 +277,8 @@ void __cpuinit octeon_cache_init(void)
 	flush_icache_range		= octeon_flush_icache_range;
 	local_flush_icache_range	= local_octeon_flush_icache_range;
 
+	__flush_kernel_vmap_range	= octeon_flush_kernel_vmap_range;
+
 	build_clear_page();
 	build_copy_page();
 }

arch/mips/mm/c-r3k.c

@@ -299,6 +299,11 @@ static void r3k_flush_cache_sigtramp(unsigned long addr)
 	write_c0_status(flags);
 }
 
+static void r3k_flush_kernel_vmap_range(unsigned long vaddr, int size)
+{
+	BUG();
+}
+
 static void r3k_dma_cache_wback_inv(unsigned long start, unsigned long size)
 {
 	/* Catch bad driver code */
@@ -323,6 +328,8 @@ void __cpuinit r3k_cache_init(void)
 	flush_icache_range = r3k_flush_icache_range;
 	local_flush_icache_range = r3k_flush_icache_range;
 
+	__flush_kernel_vmap_range = r3k_flush_kernel_vmap_range;
+
 	flush_cache_sigtramp = r3k_flush_cache_sigtramp;
 	local_flush_data_cache_page = local_r3k_flush_data_cache_page;
 	flush_data_cache_page = r3k_flush_data_cache_page;

arch/mips/mm/c-r4k.c

@@ -722,6 +722,39 @@ static void r4k_flush_icache_all(void)
 		r4k_blast_icache();
 }
 
+struct flush_kernel_vmap_range_args {
+	unsigned long	vaddr;
+	int		size;
+};
+
+static inline void local_r4k_flush_kernel_vmap_range(void *args)
+{
+	struct flush_kernel_vmap_range_args *vmra = args;
+	unsigned long vaddr = vmra->vaddr;
+	int size = vmra->size;
+
+	/*
+	 * Aliases only affect the primary caches so don't bother with
+	 * S-caches or T-caches.
+	 */
+	if (cpu_has_safe_index_cacheops && size >= dcache_size)
+		r4k_blast_dcache();
+	else {
+		R4600_HIT_CACHEOP_WAR_IMPL;
+		blast_dcache_range(vaddr, vaddr + size);
+	}
+}
+
+static void r4k_flush_kernel_vmap_range(unsigned long vaddr, int size)
+{
+	struct flush_kernel_vmap_range_args args;
+
+	args.vaddr = (unsigned long) vaddr;
+	args.size = size;
+
+	r4k_on_each_cpu(local_r4k_flush_kernel_vmap_range, &args);
+}
+
 static inline void rm7k_erratum31(void)
 {
 	const unsigned long ic_lsize = 32;
@@ -1403,6 +1436,8 @@ void __cpuinit r4k_cache_init(void)
 	flush_cache_page	= r4k_flush_cache_page;
 	flush_cache_range	= r4k_flush_cache_range;
 
+	__flush_kernel_vmap_range = r4k_flush_kernel_vmap_range;
+
 	flush_cache_sigtramp	= r4k_flush_cache_sigtramp;
 	flush_icache_all	= r4k_flush_icache_all;
 	local_flush_data_cache_page	= local_r4k_flush_data_cache_page;

arch/mips/mm/c-tx39.c

@@ -253,6 +253,11 @@ static void tx39_flush_icache_range(unsigned long start, unsigned long end)
 	}
 }
 
+static void tx39_flush_kernel_vmap_range(unsigned long vaddr, int size)
+{
+	BUG();
+}
+
 static void tx39_dma_cache_wback_inv(unsigned long addr, unsigned long size)
 {
 	unsigned long end;
@@ -394,6 +399,8 @@ void __cpuinit tx39_cache_init(void)
 		flush_icache_range = tx39_flush_icache_range;
 		local_flush_icache_range = tx39_flush_icache_range;
 
+		__flush_kernel_vmap_range = tx39_flush_kernel_vmap_range;
+
 		flush_cache_sigtramp = tx39_flush_cache_sigtramp;
 		local_flush_data_cache_page = local_tx39_flush_data_cache_page;
 		flush_data_cache_page = tx39_flush_data_cache_page;

arch/mips/mm/cache.c

@@ -35,6 +35,11 @@ void (*local_flush_icache_range)(unsigned long start, unsigned long end);
 void (*__flush_cache_vmap)(void);
 void (*__flush_cache_vunmap)(void);
 
+void (*__flush_kernel_vmap_range)(unsigned long vaddr, int size);
+void (*__invalidate_kernel_vmap_range)(unsigned long vaddr, int size);
+
+EXPORT_SYMBOL_GPL(__flush_kernel_vmap_range);
+
 /* MIPS specific cache operations */
 void (*flush_cache_sigtramp)(unsigned long addr);
 void (*local_flush_data_cache_page)(void * addr);

arch/mips/mm/tlb-r3k.c

@@ -223,7 +223,7 @@ void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
 	local_irq_restore(flags);
 }
 
-void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
+void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
 		     unsigned long entryhi, unsigned long pagemask)
 {
 	unsigned long flags;

arch/mips/mm/tlb-r4k.c

@@ -337,7 +337,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
 	EXIT_CRITICAL(flags);
 }
 
-void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
+void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
 		     unsigned long entryhi, unsigned long pagemask)
 {
 	unsigned long flags;

arch/mips/netlogic/Platform

@@ -4,6 +4,11 @@
 cflags-$(CONFIG_NLM_COMMON)  += -I$(srctree)/arch/mips/include/asm/mach-netlogic
 cflags-$(CONFIG_NLM_COMMON)  += -I$(srctree)/arch/mips/include/asm/netlogic
 
+#
+# use mips64 if xlr is not available
+#
+cflags-$(CONFIG_NLM_XLR)	+= $(call cc-option,-march=xlr,-march=mips64)
+
 #
 # NETLOGIC XLR/XLS SoC, Simulator and boards
 #

arch/mips/netlogic/xlr/setup.c

@@ -53,7 +53,7 @@ unsigned long netlogic_io_base = (unsigned long)(DEFAULT_NETLOGIC_IO_BASE);
 unsigned long nlm_common_ebase = 0x0;
 struct psb_info nlm_prom_info;
 
-static void nlm_early_serial_setup(void)
+static void __init nlm_early_serial_setup(void)
 {
 	struct uart_port s;
 	nlm_reg_t *uart_base;
@@ -101,7 +101,7 @@ void __init prom_free_prom_memory(void)
 	/* Nothing yet */
 }
 
-static void build_arcs_cmdline(int *argv)
+static void __init build_arcs_cmdline(int *argv)
 {
 	int i, remain, len;
 	char *arg;

arch/mips/netlogic/xlr/smp.c

@@ -158,6 +158,10 @@ void __init nlm_smp_setup(void)
 
 	num_cpus = 1;
 	for (i = 0; i < NR_CPUS; i++) {
+		/*
+		 * BSP is not set in nlm_cpu_ready array, it is only for
+		 * ASPs (goto see smpboot.S)
+		 */
 		if (nlm_cpu_ready[i]) {
 			cpu_set(i, phys_cpu_present_map);
 			__cpu_number_map[i] = num_cpus;
@@ -191,7 +195,7 @@ struct plat_smp_ops nlm_smp_ops = {
 
 unsigned long secondary_entry_point;
 
-int nlm_wakeup_secondary_cpus(u32 wakeup_mask)
+int __cpuinit nlm_wakeup_secondary_cpus(u32 wakeup_mask)
 {
 	unsigned int tid, pid, ipi, i, boot_cpu;
 	void *reset_vec;

arch/mips/netlogic/xlr/smpboot.S

@@ -32,17 +32,19 @@
  * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
+#include <linux/init.h>
+
 #include <asm/asm.h>
 #include <asm/asm-offsets.h>
 #include <asm/regdef.h>
 #include <asm/mipsregs.h>
 
-
-/* Don't jump to linux function from Bootloader stack. Change it
- * here. Kernel might allocate bootloader memory before all the CPUs are
- * brought up (eg: Inode cache region) and we better don't overwrite this
- * memory
+/*
+ * Early code for secondary CPUs. This will get them out of the bootloader
+ * code and into linux. Needed because the bootloader area will be taken
+ * and initialized by linux.
  */
+	__CPUINIT
 NESTED(prom_pre_boot_secondary_cpus, 16, sp)
 	.set	mips64
 	mfc0	t0, $15, 1	# read ebase
@@ -73,7 +75,11 @@ NESTED(prom_pre_boot_secondary_cpus, 16, sp)
 	jr	t0
 	nop
 END(prom_pre_boot_secondary_cpus)
+	__FINIT
 
+/*
+ * NMI code, used for CPU wakeup, copied to reset entry
+ */
 NESTED(nlm_boot_smp_nmi, 0, sp)
 	.set push
 	.set noat

arch/mips/pci/Makefile

@@ -18,14 +18,13 @@ obj-$(CONFIG_PCI_TX4927)	+= ops-tx4927.o
 obj-$(CONFIG_BCM47XX)		+= pci-bcm47xx.o
 obj-$(CONFIG_BCM63XX)		+= pci-bcm63xx.o fixup-bcm63xx.o \
 					ops-bcm63xx.o
+obj-$(CONFIG_MIPS_ALCHEMY)	+= pci-alchemy.o
 
 #
 # These are still pretty much in the old state, watch, go blind.
 #
 obj-$(CONFIG_LASAT)		+= pci-lasat.o
 obj-$(CONFIG_MIPS_COBALT)	+= fixup-cobalt.o
-obj-$(CONFIG_SOC_AU1500)	+= fixup-au1000.o ops-au1000.o
-obj-$(CONFIG_SOC_AU1550)	+= fixup-au1000.o ops-au1000.o
 obj-$(CONFIG_SOC_PNX8550)	+= fixup-pnx8550.o ops-pnx8550.o
 obj-$(CONFIG_LEMOTE_FULOONG2E)	+= fixup-fuloong2e.o ops-loongson2.o
 obj-$(CONFIG_LEMOTE_MACH2F)	+= fixup-lemote2f.o ops-loongson2.o

arch/mips/pci/fixup-au1000.c

-/*
- * BRIEF MODULE DESCRIPTION
- *	Board specific PCI fixups.
- *
- * Copyright 2001-2003, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/pci.h>
-#include <linux/init.h>
-
-extern char irq_tab_alchemy[][5];
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	return irq_tab_alchemy[slot][pin];
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	return 0;
-}

arch/mips/pmc-sierra/msp71xx/msp_setup.c

@@ -14,6 +14,7 @@
 #include <asm/cacheflush.h>
 #include <asm/r4kcache.h>
 #include <asm/reboot.h>
+#include <asm/smp-ops.h>
 #include <asm/time.h>
 
 #include <msp_prom.h>

arch/mips/pnx8550/common/prom.c

@@ -30,7 +30,7 @@ typedef struct
 }t_env_var;
 
 
-char * prom_getcmdline(void)
+char * __init prom_getcmdline(void)
 {
 	return &(arcs_cmdline[0]);
 }

arch/mips/sgi-ip27/ip27-irq.c

@@ -337,12 +337,12 @@ static struct irq_chip bridge_irq_type = {
 	.irq_unmask	= enable_bridge_irq,
 };
 
-void __devinit register_bridge_irq(unsigned int irq)
+void register_bridge_irq(unsigned int irq)
 {
 	irq_set_chip_and_handler(irq, &bridge_irq_type, handle_level_irq);
 }
 
-int __devinit request_bridge_irq(struct bridge_controller *bc)
+int request_bridge_irq(struct bridge_controller *bc)
 {
 	int irq = allocate_irqno();
 	int swlevel, cpu;

drivers/usb/host/Makefile

@@ -36,3 +36,4 @@ obj-$(CONFIG_USB_HWA_HCD)	+= hwa-hc.o
 obj-$(CONFIG_USB_IMX21_HCD)	+= imx21-hcd.o
 obj-$(CONFIG_USB_FSL_MPH_DR_OF)	+= fsl-mph-dr-of.o
 obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o
+obj-$(CONFIG_MIPS_ALCHEMY)	+= alchemy-common.o