staging:iio:ad7192: Add support for the AD7193

The AD7193 is mostly register map compatible to the AD7192. The main
difference is that it has 8 instead of 4 inputs, so the way the input
channels are selected is slightly different.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

drivers/staging/iio/adc/Kconfig

@@ -58,12 +58,12 @@ config AD7816
 	  temperature sensors and ADC.
 
 config AD7192
-	tristate "Analog Devices AD7190 AD7192 AD7195 ADC driver"
+	tristate "Analog Devices AD7190 AD7192 AD7193 AD7195 ADC driver"
 	depends on SPI
 	select AD_SIGMA_DELTA
 	help
 	  Say yes here to build support for Analog Devices AD7190,
-	  AD7192 or AD7195 SPI analog to digital converters (ADC).
+	  AD7192, AD7193 or AD7195 SPI analog to digital converters (ADC).
 	  If unsure, say N (but it's safe to say "Y").
 
 	  To compile this driver as a module, choose M here: the

drivers/staging/iio/adc/ad7192.c

 /*
- * AD7190 AD7192 AD7195 SPI ADC driver
+ * AD7190 AD7192 AD7193 AD7195 SPI ADC driver
  *
- * Copyright 2011-2012 Analog Devices Inc.
+ * Copyright 2011-2015 Analog Devices Inc.
  *
  * Licensed under the GPL-2.
  */
@@ -92,26 +92,43 @@
 
 #define AD7192_CONF_CHOP	BIT(23) /* CHOP enable */
 #define AD7192_CONF_REFSEL	BIT(20) /* REFIN1/REFIN2 Reference Select */
-#define AD7192_CONF_CHAN(x)	(((1 << (x)) & 0xFF) << 8) /* Channel select */
-#define AD7192_CONF_CHAN_MASK	(0xFF << 8) /* Channel select mask */
+#define AD7192_CONF_CHAN(x)	((x) << 8) /* Channel select */
+#define AD7192_CONF_CHAN_MASK	(0x7FF << 8) /* Channel select mask */
 #define AD7192_CONF_BURN	BIT(7) /* Burnout current enable */
 #define AD7192_CONF_REFDET	BIT(6) /* Reference detect enable */
 #define AD7192_CONF_BUF		BIT(4) /* Buffered Mode Enable */
 #define AD7192_CONF_UNIPOLAR	BIT(3) /* Unipolar/Bipolar Enable */
 #define AD7192_CONF_GAIN(x)	((x) & 0x7) /* Gain Select */
 
-#define AD7192_CH_AIN1P_AIN2M	0 /* AIN1(+) - AIN2(-) */
-#define AD7192_CH_AIN3P_AIN4M	1 /* AIN3(+) - AIN4(-) */
-#define AD7192_CH_TEMP		2 /* Temp Sensor */
-#define AD7192_CH_AIN2P_AIN2M	3 /* AIN2(+) - AIN2(-) */
-#define AD7192_CH_AIN1		4 /* AIN1 - AINCOM */
-#define AD7192_CH_AIN2		5 /* AIN2 - AINCOM */
-#define AD7192_CH_AIN3		6 /* AIN3 - AINCOM */
-#define AD7192_CH_AIN4		7 /* AIN4 - AINCOM */
+#define AD7192_CH_AIN1P_AIN2M	BIT(0) /* AIN1(+) - AIN2(-) */
+#define AD7192_CH_AIN3P_AIN4M	BIT(1) /* AIN3(+) - AIN4(-) */
+#define AD7192_CH_TEMP		BIT(2) /* Temp Sensor */
+#define AD7192_CH_AIN2P_AIN2M	BIT(3) /* AIN2(+) - AIN2(-) */
+#define AD7192_CH_AIN1		BIT(4) /* AIN1 - AINCOM */
+#define AD7192_CH_AIN2		BIT(5) /* AIN2 - AINCOM */
+#define AD7192_CH_AIN3		BIT(6) /* AIN3 - AINCOM */
+#define AD7192_CH_AIN4		BIT(7) /* AIN4 - AINCOM */
+
+#define AD7193_CH_AIN1P_AIN2M	0x000  /* AIN1(+) - AIN2(-) */
+#define AD7193_CH_AIN3P_AIN4M	0x001  /* AIN3(+) - AIN4(-) */
+#define AD7193_CH_AIN5P_AIN6M	0x002  /* AIN5(+) - AIN6(-) */
+#define AD7193_CH_AIN7P_AIN8M	0x004  /* AIN7(+) - AIN8(-) */
+#define AD7193_CH_TEMP		0x100 /* Temp senseor */
+#define AD7193_CH_AIN2P_AIN2M	0x200 /* AIN2(+) - AIN2(-) */
+#define AD7193_CH_AIN1		0x401 /* AIN1 - AINCOM */
+#define AD7193_CH_AIN2		0x402 /* AIN2 - AINCOM */
+#define AD7193_CH_AIN3		0x404 /* AIN3 - AINCOM */
+#define AD7193_CH_AIN4		0x408 /* AIN4 - AINCOM */
+#define AD7193_CH_AIN5		0x410 /* AIN5 - AINCOM */
+#define AD7193_CH_AIN6		0x420 /* AIN6 - AINCOM */
+#define AD7193_CH_AIN7		0x440 /* AIN7 - AINCOM */
+#define AD7193_CH_AIN8		0x480 /* AIN7 - AINCOM */
+#define AD7193_CH_AINCOM	0x600 /* AINCOM - AINCOM */
 
 /* ID Register Bit Designations (AD7192_REG_ID) */
 #define ID_AD7190		0x4
 #define ID_AD7192		0x0
+#define ID_AD7193		0x2
 #define ID_AD7195		0x6
 #define AD7192_ID_MASK		0x0F
 
@@ -607,6 +624,24 @@ static const struct iio_chan_spec ad7192_channels[] = {
 	IIO_CHAN_SOFT_TIMESTAMP(8),
 };
 
+static const struct iio_chan_spec ad7193_channels[] = {
+	AD_SD_DIFF_CHANNEL(0, 1, 2, AD7193_CH_AIN1P_AIN2M, 24, 32, 0),
+	AD_SD_DIFF_CHANNEL(1, 3, 4, AD7193_CH_AIN3P_AIN4M, 24, 32, 0),
+	AD_SD_DIFF_CHANNEL(2, 5, 6, AD7193_CH_AIN5P_AIN6M, 24, 32, 0),
+	AD_SD_DIFF_CHANNEL(3, 7, 8, AD7193_CH_AIN7P_AIN8M, 24, 32, 0),
+	AD_SD_TEMP_CHANNEL(4, AD7193_CH_TEMP, 24, 32, 0),
+	AD_SD_SHORTED_CHANNEL(5, 2, AD7193_CH_AIN2P_AIN2M, 24, 32, 0),
+	AD_SD_CHANNEL(6, 1, AD7193_CH_AIN1, 24, 32, 0),
+	AD_SD_CHANNEL(7, 2, AD7193_CH_AIN2, 24, 32, 0),
+	AD_SD_CHANNEL(8, 3, AD7193_CH_AIN3, 24, 32, 0),
+	AD_SD_CHANNEL(9, 4, AD7193_CH_AIN4, 24, 32, 0),
+	AD_SD_CHANNEL(10, 5, AD7193_CH_AIN5, 24, 32, 0),
+	AD_SD_CHANNEL(11, 6, AD7193_CH_AIN6, 24, 32, 0),
+	AD_SD_CHANNEL(12, 7, AD7193_CH_AIN7, 24, 32, 0),
+	AD_SD_CHANNEL(13, 8, AD7193_CH_AIN8, 24, 32, 0),
+	IIO_CHAN_SOFT_TIMESTAMP(14),
+};
+
 static int ad7192_probe(struct spi_device *spi)
 {
 	const struct ad7192_platform_data *pdata = dev_get_platdata(&spi->dev);
@@ -651,8 +686,18 @@ static int ad7192_probe(struct spi_device *spi)
 	indio_dev->dev.parent = &spi->dev;
 	indio_dev->name = spi_get_device_id(spi)->name;
 	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	switch (st->devid) {
+	case ID_AD7193:
+		indio_dev->channels = ad7193_channels;
+		indio_dev->num_channels = ARRAY_SIZE(ad7193_channels);
+		break;
+	default:
 		indio_dev->channels = ad7192_channels;
 		indio_dev->num_channels = ARRAY_SIZE(ad7192_channels);
+		break;
+	}
+
 	if (st->devid == ID_AD7195)
 		indio_dev->info = &ad7195_info;
 	else
@@ -699,6 +744,7 @@ static int ad7192_remove(struct spi_device *spi)
 static const struct spi_device_id ad7192_id[] = {
 	{"ad7190", ID_AD7190},
 	{"ad7192", ID_AD7192},
+	{"ad7193", ID_AD7193},
 	{"ad7195", ID_AD7195},
 	{}
 };
@@ -715,5 +761,5 @@ static struct spi_driver ad7192_driver = {
 module_spi_driver(ad7192_driver);
 
 MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
-MODULE_DESCRIPTION("Analog Devices AD7190, AD7192, AD7195 ADC");
+MODULE_DESCRIPTION("Analog Devices AD7190, AD7192, AD7193, AD7195 ADC");
 MODULE_LICENSE("GPL v2");