Commit d6a20deb authored by Ludovic Desroches's avatar Ludovic Desroches Committed by Chris Ball

mmc: at91-mci: remove obsolete driver

The at91-mci driver is not needed anymore since the atmel-mci driver now
supports all Atmel devices.
Signed-off-by: default avatarLudovic Desroches <ludovic.desroches@atmel.com>
Acked-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: default avatarChris Ball <cjb@laptop.org>
parent f5072512
...@@ -1352,14 +1352,6 @@ S: Maintained ...@@ -1352,14 +1352,6 @@ S: Maintained
F: drivers/atm/ F: drivers/atm/
F: include/linux/atm* F: include/linux/atm*
ATMEL AT91 MCI DRIVER
M: Ludovic Desroches <ludovic.desroches@atmel.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.atmel.com/products/AT91/
W: http://www.at91.com/
S: Maintained
F: drivers/mmc/host/at91_mci.c
ATMEL AT91 / AT32 MCI DRIVER ATMEL AT91 / AT32 MCI DRIVER
M: Ludovic Desroches <ludovic.desroches@atmel.com> M: Ludovic Desroches <ludovic.desroches@atmel.com>
S: Maintained S: Maintained
......
...@@ -70,16 +70,6 @@ struct at91_cf_data { ...@@ -70,16 +70,6 @@ struct at91_cf_data {
extern void __init at91_add_device_cf(struct at91_cf_data *data); extern void __init at91_add_device_cf(struct at91_cf_data *data);
/* MMC / SD */ /* MMC / SD */
/* at91_mci platform config */
struct at91_mmc_data {
int det_pin; /* card detect IRQ */
unsigned slot_b:1; /* uses Slot B */
unsigned wire4:1; /* (SD) supports DAT0..DAT3 */
int wp_pin; /* (SD) writeprotect detect */
int vcc_pin; /* power switching (high == on) */
};
extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
/* atmel-mci platform config */ /* atmel-mci platform config */
extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data); extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data);
......
...@@ -270,26 +270,8 @@ config MMC_AU1X ...@@ -270,26 +270,8 @@ config MMC_AU1X
If unsure, say N. If unsure, say N.
choice
prompt "Atmel SD/MMC Driver"
depends on AVR32 || ARCH_AT91
default MMC_ATMELMCI if AVR32
help
Choose which driver to use for the Atmel MCI Silicon
config MMC_AT91
tristate "AT91 SD/MMC Card Interface support (DEPRECATED)"
depends on ARCH_AT91
help
This selects the AT91 MCI controller. This driver will
be removed soon (for more information have a look to
Documentation/feature-removal-schedule.txt). Please use
MMC_ATMEL_MCI.
If unsure, say N.
config MMC_ATMELMCI config MMC_ATMELMCI
tristate "Atmel Multimedia Card Interface support" tristate "Atmel SD/MMC Driver (Multimedia Card Interface)"
depends on AVR32 || ARCH_AT91 depends on AVR32 || ARCH_AT91
help help
This selects the Atmel Multimedia Card Interface driver. If This selects the Atmel Multimedia Card Interface driver. If
...@@ -298,8 +280,6 @@ config MMC_ATMELMCI ...@@ -298,8 +280,6 @@ config MMC_ATMELMCI
If unsure, say N. If unsure, say N.
endchoice
config MMC_ATMELMCI_DMA config MMC_ATMELMCI_DMA
bool "Atmel MCI DMA support" bool "Atmel MCI DMA support"
depends on MMC_ATMELMCI && (AVR32 || ARCH_AT91SAM9G45) && DMA_ENGINE depends on MMC_ATMELMCI && (AVR32 || ARCH_AT91SAM9G45) && DMA_ENGINE
......
...@@ -17,7 +17,6 @@ obj-$(CONFIG_MMC_WBSD) += wbsd.o ...@@ -17,7 +17,6 @@ obj-$(CONFIG_MMC_WBSD) += wbsd.o
obj-$(CONFIG_MMC_AU1X) += au1xmmc.o obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
obj-$(CONFIG_MMC_OMAP) += omap.o obj-$(CONFIG_MMC_OMAP) += omap.o
obj-$(CONFIG_MMC_OMAP_HS) += omap_hsmmc.o obj-$(CONFIG_MMC_OMAP_HS) += omap_hsmmc.o
obj-$(CONFIG_MMC_AT91) += at91_mci.o
obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o
obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
obj-$(CONFIG_MMC_MSM) += msm_sdcc.o obj-$(CONFIG_MMC_MSM) += msm_sdcc.o
......
This diff is collapsed.
/*
* drivers/mmc/host/at91_mci.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
*
* MultiMedia Card Interface (MCI) registers.
* Based on AT91RM9200 datasheet revision F.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef AT91_MCI_H
#define AT91_MCI_H
#define AT91_MCI_CR 0x00 /* Control Register */
#define AT91_MCI_MCIEN (1 << 0) /* Multi-Media Interface Enable */
#define AT91_MCI_MCIDIS (1 << 1) /* Multi-Media Interface Disable */
#define AT91_MCI_PWSEN (1 << 2) /* Power Save Mode Enable */
#define AT91_MCI_PWSDIS (1 << 3) /* Power Save Mode Disable */
#define AT91_MCI_SWRST (1 << 7) /* Software Reset */
#define AT91_MCI_MR 0x04 /* Mode Register */
#define AT91_MCI_CLKDIV (0xff << 0) /* Clock Divider */
#define AT91_MCI_PWSDIV (7 << 8) /* Power Saving Divider */
#define AT91_MCI_RDPROOF (1 << 11) /* Read Proof Enable [SAM926[03] only] */
#define AT91_MCI_WRPROOF (1 << 12) /* Write Proof Enable [SAM926[03] only] */
#define AT91_MCI_PDCFBYTE (1 << 13) /* PDC Force Byte Transfer [SAM926[03] only] */
#define AT91_MCI_PDCPADV (1 << 14) /* PDC Padding Value */
#define AT91_MCI_PDCMODE (1 << 15) /* PDC-orientated Mode */
#define AT91_MCI_BLKLEN (0xfff << 18) /* Data Block Length */
#define AT91_MCI_DTOR 0x08 /* Data Timeout Register */
#define AT91_MCI_DTOCYC (0xf << 0) /* Data Timeout Cycle Number */
#define AT91_MCI_DTOMUL (7 << 4) /* Data Timeout Multiplier */
#define AT91_MCI_DTOMUL_1 (0 << 4)
#define AT91_MCI_DTOMUL_16 (1 << 4)
#define AT91_MCI_DTOMUL_128 (2 << 4)
#define AT91_MCI_DTOMUL_256 (3 << 4)
#define AT91_MCI_DTOMUL_1K (4 << 4)
#define AT91_MCI_DTOMUL_4K (5 << 4)
#define AT91_MCI_DTOMUL_64K (6 << 4)
#define AT91_MCI_DTOMUL_1M (7 << 4)
#define AT91_MCI_SDCR 0x0c /* SD Card Register */
#define AT91_MCI_SDCSEL (3 << 0) /* SD Card Selector */
#define AT91_MCI_SDCBUS (1 << 7) /* 1-bit or 4-bit bus */
#define AT91_MCI_ARGR 0x10 /* Argument Register */
#define AT91_MCI_CMDR 0x14 /* Command Register */
#define AT91_MCI_CMDNB (0x3f << 0) /* Command Number */
#define AT91_MCI_RSPTYP (3 << 6) /* Response Type */
#define AT91_MCI_RSPTYP_NONE (0 << 6)
#define AT91_MCI_RSPTYP_48 (1 << 6)
#define AT91_MCI_RSPTYP_136 (2 << 6)
#define AT91_MCI_SPCMD (7 << 8) /* Special Command */
#define AT91_MCI_SPCMD_NONE (0 << 8)
#define AT91_MCI_SPCMD_INIT (1 << 8)
#define AT91_MCI_SPCMD_SYNC (2 << 8)
#define AT91_MCI_SPCMD_ICMD (4 << 8)
#define AT91_MCI_SPCMD_IRESP (5 << 8)
#define AT91_MCI_OPDCMD (1 << 11) /* Open Drain Command */
#define AT91_MCI_MAXLAT (1 << 12) /* Max Latency for Command to Response */
#define AT91_MCI_TRCMD (3 << 16) /* Transfer Command */
#define AT91_MCI_TRCMD_NONE (0 << 16)
#define AT91_MCI_TRCMD_START (1 << 16)
#define AT91_MCI_TRCMD_STOP (2 << 16)
#define AT91_MCI_TRDIR (1 << 18) /* Transfer Direction */
#define AT91_MCI_TRTYP (3 << 19) /* Transfer Type */
#define AT91_MCI_TRTYP_BLOCK (0 << 19)
#define AT91_MCI_TRTYP_MULTIPLE (1 << 19)
#define AT91_MCI_TRTYP_STREAM (2 << 19)
#define AT91_MCI_TRTYP_SDIO_BYTE (4 << 19)
#define AT91_MCI_TRTYP_SDIO_BLOCK (5 << 19)
#define AT91_MCI_BLKR 0x18 /* Block Register */
#define AT91_MCI_BLKR_BCNT(n) ((0xffff & (n)) << 0) /* Block count */
#define AT91_MCI_BLKR_BLKLEN(n) ((0xffff & (n)) << 16) /* Block length */
#define AT91_MCI_RSPR(n) (0x20 + ((n) * 4)) /* Response Registers 0-3 */
#define AT91_MCR_RDR 0x30 /* Receive Data Register */
#define AT91_MCR_TDR 0x34 /* Transmit Data Register */
#define AT91_MCI_SR 0x40 /* Status Register */
#define AT91_MCI_CMDRDY (1 << 0) /* Command Ready */
#define AT91_MCI_RXRDY (1 << 1) /* Receiver Ready */
#define AT91_MCI_TXRDY (1 << 2) /* Transmit Ready */
#define AT91_MCI_BLKE (1 << 3) /* Data Block Ended */
#define AT91_MCI_DTIP (1 << 4) /* Data Transfer in Progress */
#define AT91_MCI_NOTBUSY (1 << 5) /* Data Not Busy */
#define AT91_MCI_ENDRX (1 << 6) /* End of RX Buffer */
#define AT91_MCI_ENDTX (1 << 7) /* End fo TX Buffer */
#define AT91_MCI_SDIOIRQA (1 << 8) /* SDIO Interrupt for Slot A */
#define AT91_MCI_SDIOIRQB (1 << 9) /* SDIO Interrupt for Slot B */
#define AT91_MCI_RXBUFF (1 << 14) /* RX Buffer Full */
#define AT91_MCI_TXBUFE (1 << 15) /* TX Buffer Empty */
#define AT91_MCI_RINDE (1 << 16) /* Response Index Error */
#define AT91_MCI_RDIRE (1 << 17) /* Response Direction Error */
#define AT91_MCI_RCRCE (1 << 18) /* Response CRC Error */
#define AT91_MCI_RENDE (1 << 19) /* Response End Bit Error */
#define AT91_MCI_RTOE (1 << 20) /* Response Time-out Error */
#define AT91_MCI_DCRCE (1 << 21) /* Data CRC Error */
#define AT91_MCI_DTOE (1 << 22) /* Data Time-out Error */
#define AT91_MCI_OVRE (1 << 30) /* Overrun */
#define AT91_MCI_UNRE (1 << 31) /* Underrun */
#define AT91_MCI_IER 0x44 /* Interrupt Enable Register */
#define AT91_MCI_IDR 0x48 /* Interrupt Disable Register */
#define AT91_MCI_IMR 0x4c /* Interrupt Mask Register */
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment