Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [NET] Eliminate user-selectable CONFIG_MV643XX_ETH_[012]
  [MIPS] Drop __init from init_8259A()
  [MIPS] Fix Kconfig typo bug
  [MIPS] Fix double signal on trap and break instruction
  [MIPS] sigset_32 has been made redundand by compat_sigset_t.
  [MIPS] emma2rh: Remove needless <asm/i8259.h> inclusion.
  [MIPS] Add MTD device support for Cobalt

arch/mips/cobalt/Makefile

@@ -5,5 +5,6 @@
 obj-y	 := irq.o reset.o setup.o
 
 obj-$(CONFIG_EARLY_PRINTK)	+= console.o
+obj-$(CONFIG_MTD_PHYSMAP)	+= mtd.o
 
 EXTRA_AFLAGS := $(CFLAGS)

arch/mips/cobalt/mtd.c

+/*
+ *  Registration of Cobalt MTD device.
+ *
+ *  Copyright (C) 2006  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+static struct mtd_partition cobalt_mtd_partitions[] = {
+	{
+		.name	= "Colo",
+		.offset	= 0x0,
+		.size	= 0x80000,
+	},
+};
+
+static struct physmap_flash_data cobalt_flash_data = {
+	.width		= 1,
+	.nr_parts	= 1,
+	.parts		= cobalt_mtd_partitions,
+};
+
+static struct resource cobalt_mtd_resource = {
+	.start	= 0x1fc00000,
+	.end	= 0x1fc7ffff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device cobalt_mtd = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &cobalt_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &cobalt_mtd_resource,
+};
+
+static int __init cobalt_mtd_init(void)
+{
+	platform_device_register(&cobalt_mtd);
+
+	return 0;
+}
+
+module_init(cobalt_mtd_init);

arch/mips/configs/cobalt_defconfig

 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.20
-# Sun Feb 18 21:27:37 2007
+# Mon Feb 19 14:51:58 2007
 #
 CONFIG_MIPS=y
 
@@ -373,7 +373,88 @@ CONFIG_PROC_EVENTS=y
 #
 # Memory Technology Devices (MTD)
 #
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_NAND_CAFE is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
 
 #
 # Parallel port support
@@ -901,6 +982,7 @@ CONFIG_CONFIGFS_FS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_HPFS_FS is not set

arch/mips/emma2rh/common/irq.c

@@ -27,7 +27,6 @@
 #include <linux/irq.h>
 #include <linux/types.h>
 
-#include <asm/i8259.h>
 #include <asm/system.h>
 #include <asm/mipsregs.h>
 #include <asm/debug.h>

arch/mips/emma2rh/markeins/irq.c

@@ -29,7 +29,6 @@
 #include <linux/ptrace.h>
 #include <linux/delay.h>
 
-#include <asm/i8259.h>
 #include <asm/irq_cpu.h>
 #include <asm/system.h>
 #include <asm/mipsregs.h>

arch/mips/kernel/i8259.c

@@ -28,7 +28,7 @@
  * moves to arch independent land
  */
 
-static int i8259A_auto_eoi;
+static int i8259A_auto_eoi = -1;
 DEFINE_SPINLOCK(i8259A_lock);
 /* some platforms call this... */
 void mask_and_ack_8259A(unsigned int);
@@ -216,6 +216,7 @@ void mask_and_ack_8259A(unsigned int irq)
 
 static int i8259A_resume(struct sys_device *dev)
 {
+	if (i8259A_auto_eoi >= 0)
 		init_8259A(i8259A_auto_eoi);
 	return 0;
 }
@@ -226,8 +227,10 @@ static int i8259A_shutdown(struct sys_device *dev)
 	 * the kernel initialization code can get it
 	 * out of.
 	 */
+	if (i8259A_auto_eoi >= 0) {
 		outb(0xff, PIC_MASTER_IMR);	/* mask all of 8259A-1 */
 		outb(0xff, PIC_SLAVE_IMR);	/* mask all of 8259A-1 */
+	}
 	return 0;
 }
 
@@ -252,7 +255,7 @@ static int __init i8259A_init_sysfs(void)
 
 device_initcall(i8259A_init_sysfs);
 
-void __init init_8259A(int auto_eoi)
+void init_8259A(int auto_eoi)
 {
 	unsigned long flags;
 

arch/mips/kernel/signal32.c

@@ -108,13 +108,6 @@ typedef struct compat_siginfo {
 
 /* 32-bit compatibility types */
 
-#define _NSIG_BPW32	32
-#define _NSIG_WORDS32	(_NSIG / _NSIG_BPW32)
-
-typedef struct {
-	unsigned int sig[_NSIG_WORDS32];
-} sigset_t32;
-
 typedef unsigned int __sighandler32_t;
 typedef void (*vfptr_t)(void);
 
@@ -136,7 +129,7 @@ struct ucontext32 {
 	s32                 uc_link;
 	stack32_t           uc_stack;
 	struct sigcontext32 uc_mcontext;
-	sigset_t32          uc_sigmask;   /* mask last for extensibility */
+	compat_sigset_t     uc_sigmask;   /* mask last for extensibility */
 };
 
 /*

arch/mips/kernel/traps.c

@@ -704,6 +704,7 @@ asmlinkage void do_bp(struct pt_regs *regs)
 		die_if_kernel("Break instruction in kernel code", regs);
 		force_sig(SIGTRAP, current);
 	}
+	return;
 
 out_sigsegv:
 	force_sig(SIGSEGV, current);
@@ -747,6 +748,7 @@ asmlinkage void do_tr(struct pt_regs *regs)
 		die_if_kernel("Trap instruction in kernel code", regs);
 		force_sig(SIGTRAP, current);
 	}
+	return;
 
 out_sigsegv:
 	force_sig(SIGSEGV, current);

arch/mips/momentum/jaguar_atx/platform.c

@@ -38,8 +38,6 @@ static struct platform_device mv643xx_eth_shared_device = {
 #define MV64x60_IRQ_ETH_1 49
 #define MV64x60_IRQ_ETH_2 50
 
-#ifdef CONFIG_MV643XX_ETH_0
-
 static struct resource mv64x60_eth0_resources[] = {
 	[0] = {
 		.name	= "eth0 irq",
@@ -72,9 +70,6 @@ static struct platform_device eth0_device = {
 		.platform_data = &eth0_pd,
 	},
 };
-#endif /* CONFIG_MV643XX_ETH_0 */
-
-#ifdef CONFIG_MV643XX_ETH_1
 
 static struct resource mv64x60_eth1_resources[] = {
 	[0] = {
@@ -108,9 +103,6 @@ static struct platform_device eth1_device = {
 		.platform_data = &eth1_pd,
 	},
 };
-#endif /* CONFIG_MV643XX_ETH_1 */
-
-#ifdef CONFIG_MV643XX_ETH_2
 
 static struct resource mv64x60_eth2_resources[] = {
 	[0] = {
@@ -136,19 +128,12 @@ static struct platform_device eth2_device = {
 		.platform_data = &eth2_pd,
 	},
 };
-#endif /* CONFIG_MV643XX_ETH_2 */
 
 static struct platform_device *mv643xx_eth_pd_devs[] __initdata = {
 	&mv643xx_eth_shared_device,
-#ifdef CONFIG_MV643XX_ETH_0
 	&eth0_device,
-#endif
-#ifdef CONFIG_MV643XX_ETH_1
 	&eth1_device,
-#endif
-#ifdef CONFIG_MV643XX_ETH_2
 	&eth2_device,
-#endif
 };
 
 static u8 __init exchange_bit(u8 val, u8 cs)
@@ -215,15 +200,9 @@ static int __init mv643xx_eth_add_pds(void)
 	int ret;
 
 	get_mac(mac);
-#ifdef CONFIG_MV643XX_ETH_0
 	eth_mac_add(eth1_mac_addr, mac, 0);
-#endif
-#ifdef CONFIG_MV643XX_ETH_1
 	eth_mac_add(eth1_mac_addr, mac, 1);
-#endif
-#ifdef CONFIG_MV643XX_ETH_2
 	eth_mac_add(eth2_mac_addr, mac, 2);
-#endif
 	ret = platform_add_devices(mv643xx_eth_pd_devs,
 			ARRAY_SIZE(mv643xx_eth_pd_devs));
 

arch/mips/momentum/ocelot_3/platform.c

@@ -38,8 +38,6 @@ static struct platform_device mv643xx_eth_shared_device = {
 #define MV64x60_IRQ_ETH_1 49
 #define MV64x60_IRQ_ETH_2 50
 
-#ifdef CONFIG_MV643XX_ETH_0
-
 static struct resource mv64x60_eth0_resources[] = {
 	[0] = {
 		.name	= "eth0 irq",
@@ -72,9 +70,6 @@ static struct platform_device eth0_device = {
 		.platform_data = &eth0_pd,
 	},
 };
-#endif /* CONFIG_MV643XX_ETH_0 */
-
-#ifdef CONFIG_MV643XX_ETH_1
 
 static struct resource mv64x60_eth1_resources[] = {
 	[0] = {
@@ -108,9 +103,6 @@ static struct platform_device eth1_device = {
 		.platform_data = &eth1_pd,
 	},
 };
-#endif /* CONFIG_MV643XX_ETH_1 */
-
-#ifdef CONFIG_MV643XX_ETH_2
 
 static struct resource mv64x60_eth2_resources[] = {
 	[0] = {
@@ -136,19 +128,12 @@ static struct platform_device eth2_device = {
 		.platform_data = &eth2_pd,
 	},
 };
-#endif /* CONFIG_MV643XX_ETH_2 */
 
 static struct platform_device *mv643xx_eth_pd_devs[] __initdata = {
 	&mv643xx_eth_shared_device,
-#ifdef CONFIG_MV643XX_ETH_0
 	&eth0_device,
-#endif
-#ifdef CONFIG_MV643XX_ETH_1
 	&eth1_device,
-#endif
-#ifdef CONFIG_MV643XX_ETH_2
 	&eth2_device,
-#endif
 };
 
 static u8 __init exchange_bit(u8 val, u8 cs)
@@ -215,15 +200,9 @@ static int __init mv643xx_eth_add_pds(void)
 	int ret;
 
 	get_mac(mac);
-#ifdef CONFIG_MV643XX_ETH_0
 	eth_mac_add(eth1_mac_addr, mac, 0);
-#endif
-#ifdef CONFIG_MV643XX_ETH_1
 	eth_mac_add(eth1_mac_addr, mac, 1);
-#endif
-#ifdef CONFIG_MV643XX_ETH_2
 	eth_mac_add(eth2_mac_addr, mac, 2);
-#endif
 	ret = platform_add_devices(mv643xx_eth_pd_devs,
 			ARRAY_SIZE(mv643xx_eth_pd_devs));
 

arch/mips/momentum/ocelot_c/platform.c

@@ -37,8 +37,6 @@ static struct platform_device mv643xx_eth_shared_device = {
 #define MV64x60_IRQ_ETH_0 48
 #define MV64x60_IRQ_ETH_1 49
 
-#ifdef CONFIG_MV643XX_ETH_0
-
 static struct resource mv64x60_eth0_resources[] = {
 	[0] = {
 		.name	= "eth0 irq",
@@ -71,9 +69,6 @@ static struct platform_device eth0_device = {
 		.platform_data = &eth0_pd,
 	},
 };
-#endif /* CONFIG_MV643XX_ETH_0 */
-
-#ifdef CONFIG_MV643XX_ETH_1
 
 static struct resource mv64x60_eth1_resources[] = {
 	[0] = {
@@ -107,16 +102,11 @@ static struct platform_device eth1_device = {
 		.platform_data = &eth1_pd,
 	},
 };
-#endif /* CONFIG_MV643XX_ETH_1 */
 
 static struct platform_device *mv643xx_eth_pd_devs[] __initdata = {
 	&mv643xx_eth_shared_device,
-#ifdef CONFIG_MV643XX_ETH_0
 	&eth0_device,
-#endif
-#ifdef CONFIG_MV643XX_ETH_1
 	&eth1_device,
-#endif
 	/* The third port is not wired up on the Ocelot C */
 };
 
@@ -184,12 +174,8 @@ static int __init mv643xx_eth_add_pds(void)
 	int ret;
 
 	get_mac(mac);
-#ifdef CONFIG_MV643XX_ETH_0
 	eth_mac_add(eth1_mac_addr, mac, 0);
-#endif
-#ifdef CONFIG_MV643XX_ETH_1
 	eth_mac_add(eth1_mac_addr, mac, 1);
-#endif
 	ret = platform_add_devices(mv643xx_eth_pd_devs,
 			ARRAY_SIZE(mv643xx_eth_pd_devs));
 

arch/mips/oprofile/Kconfig

@@ -11,7 +11,7 @@ config PROFILING
 
 config OPROFILE
 	tristate "OProfile system profiling (EXPERIMENTAL)"
-	depends on PROFILING && !!MIPS_MT_SMTC && EXPERIMENTAL
+	depends on PROFILING && !MIPS_MT_SMTC && EXPERIMENTAL
 	help
 	  OProfile is a profiling system capable of profiling the
 	  whole system, include the kernel, kernel modules, libraries,

arch/ppc/Kconfig

@@ -845,6 +845,21 @@ config MV64X60
 	select PPC_INDIRECT_PCI
 	default y
 
+config MV643XX_ETH_0
+	bool
+	depends on MV643XX_ETH && (KATANA || RADSTONE_PPC7D || EV64360 || HDPU)
+	default y
+
+config MV643XX_ETH_1
+	bool
+	depends on MV643XX_ETH && (KATANA || RADSTONE_PPC7D || EV64360)
+	default y
+
+config MV643XX_ETH_2
+	bool
+	depends on MV643XX_ETH && (KATANA || RADSTONE_PPC7D || EV64360)
+	default y
+
 menu "Set bridge options"
 	depends on MV64X60
 

drivers/char/lcd.c

@@ -409,138 +409,6 @@ static int lcd_ioctl(struct inode *inode, struct file *file,
 			break;
 		}
 
-//  Erase the flash
-
-	case FLASH_Erase:{
-
-			int ctr = 0;
-
-			if ( !capable(CAP_SYS_ADMIN) ) return -EPERM;
-
-			pr_info(LCD "Erasing Flash\n");
-
-			// Chip Erase Sequence
-			WRITE_FLASH(kFlash_Addr1, kFlash_Data1);
-			WRITE_FLASH(kFlash_Addr2, kFlash_Data2);
-			WRITE_FLASH(kFlash_Addr1, kFlash_Erase3);
-			WRITE_FLASH(kFlash_Addr1, kFlash_Data1);
-			WRITE_FLASH(kFlash_Addr2, kFlash_Data2);
-			WRITE_FLASH(kFlash_Addr1, kFlash_Erase6);
-
-			while ((!dqpoll(0x00000000, 0xFF))
-			       && (!timeout(0x00000000))) {
-				ctr++;
-			}
-
-			if (READ_FLASH(0x07FFF0) == 0xFF) {
-				pr_info(LCD "Erase Successful\n");
-			} else if (timeout) {
-				pr_info(LCD "Erase Timed Out\n");
-			}
-
-			break;
-		}
-
-// burn the flash
-
-	case FLASH_Burn:{
-
-			volatile unsigned long burn_addr;
-			unsigned long flags;
-			unsigned int i, index;
-			unsigned char *rom;
-
-
-			struct lcd_display display;
-
-			if ( !capable(CAP_SYS_ADMIN) ) return -EPERM;
-
-			if (copy_from_user
-			    (&display, (struct lcd_display *) arg,
-			     sizeof(struct lcd_display)))
-				return -EFAULT;
-			rom = kmalloc((128), GFP_ATOMIC);
-			if (rom == NULL) {
-				printk(KERN_ERR LCD "kmalloc() failed in %s\n",
-						__FUNCTION__);
-				return -ENOMEM;
-			}
-
-			pr_info(LCD "Starting Flash burn\n");
-			for (i = 0; i < FLASH_SIZE; i = i + 128) {
-
-				if (copy_from_user
-				    (rom, display.RomImage + i, 128)) {
-					kfree(rom);
-					return -EFAULT;
-				}
-				burn_addr = kFlashBase + i;
-				spin_lock_irqsave(&lcd_lock, flags);
-				for (index = 0; index < (128); index++) {
-
-					WRITE_FLASH(kFlash_Addr1,
-						    kFlash_Data1);
-					WRITE_FLASH(kFlash_Addr2,
-						    kFlash_Data2);
-					WRITE_FLASH(kFlash_Addr1,
-						    kFlash_Prog);
-					*((volatile unsigned char *)burn_addr) =
-					  (volatile unsigned char) rom[index];
-
-					while ((!dqpoll (burn_addr,
-						(volatile unsigned char)
-						rom[index])) &&
-						(!timeout(burn_addr))) { }
-					burn_addr++;
-				}
-				spin_unlock_irqrestore(&lcd_lock, flags);
-				if (* ((volatile unsigned char *)
-					(burn_addr - 1)) ==
-					(volatile unsigned char)
-					rom[index - 1]) {
-				} else if (timeout) {
-					pr_info(LCD "Flash burn timed out\n");
-				}
-
-
-			}
-			kfree(rom);
-
-			pr_info(LCD "Flash successfully burned\n");
-
-			break;
-		}
-
-//  read the flash all at once
-
-	case FLASH_Read:{
-
-			unsigned char *user_bytes;
-			volatile unsigned long read_addr;
-			unsigned int i;
-
-			user_bytes =
-			    &(((struct lcd_display *) arg)->RomImage[0]);
-
-			if (!access_ok
-			    (VERIFY_WRITE, user_bytes, FLASH_SIZE))
-				return -EFAULT;
-
-			pr_info(LCD "Reading Flash");
-			for (i = 0; i < FLASH_SIZE; i++) {
-				unsigned char tmp_byte;
-				read_addr = kFlashBase + i;
-				tmp_byte =
-				    *((volatile unsigned char *)
-				      read_addr);
-				if (__put_user(tmp_byte, &user_bytes[i]))
-					return -EFAULT;
-			}
-
-
-			break;
-		}
-
 	default:
 		return -EINVAL;
 
@@ -644,42 +512,6 @@ static void __exit lcd_exit(void)
 	misc_deregister(&lcd_dev);
 }
 
-//
-// Function: dqpoll
-//
-// Description:  Polls the data lines to see if the flash is busy
-//
-// In: address, byte data
-//
-// Out: 0 = busy, 1 = write or erase complete
-//
-//
-
-static int dqpoll(volatile unsigned long address, volatile unsigned char data)
-{
-	volatile unsigned char dq7;
-
-	dq7 = data & 0x80;
-
-	return ((READ_FLASH(address) & 0x80) == dq7);
-}
-
-//
-// Function: timeout
-//
-// Description: Checks to see if erase or write has timed out
-//              By polling dq5
-//
-// In: address
-//
-//
-// Out: 0 = not timed out, 1 = timed out
-
-static int timeout(volatile unsigned long address)
-{
-	return (READ_FLASH(address) & 0x20) == 0x20;
-}
-
 module_init(lcd_init);
 module_exit(lcd_exit);
 

drivers/char/lcd.h

@@ -14,11 +14,7 @@
 
 // function headers
 
-static int dqpoll(volatile unsigned long, volatile unsigned char );
-static int timeout(volatile unsigned long);
-
 #define LCD_CHARS_PER_LINE 40
-#define FLASH_SIZE 524288
 #define MAX_IDLE_TIME 120
 
 struct lcd_display {
@@ -54,26 +50,6 @@ struct lcd_display {
 #define LCDTimeoutValue	0xfff
 
 
-// Flash definitions AMD 29F040
-#define kFlashBase	0x0FC00000
-
-#define kFlash_Addr1    0x5555
-#define kFlash_Addr2    0x2AAA
-#define kFlash_Data1    0xAA
-#define kFlash_Data2    0x55
-#define kFlash_Prog     0xA0
-#define kFlash_Erase3   0x80
-#define kFlash_Erase6   0x10
-#define kFlash_Read     0xF0
-
-#define kFlash_ID       0x90
-#define kFlash_VenAddr  0x00
-#define kFlash_DevAddr  0x01
-#define kFlash_VenID    0x01
-#define kFlash_DevID    0xA4    // 29F040
-//#define kFlash_DevID  0xAD    // 29F016
-
-
 // Macros
 
 #define LCDWriteData(x)	outl((x << 24), kLCD_DR)
@@ -89,9 +65,6 @@ struct lcd_display {
 #define WRITE_GAL(x,y)	outl(y, 0x04000000 | (x))
 #define BusyCheck()	while ((LCDReadInst & 0x80) == 0x80)
 
-#define WRITE_FLASH(x,y) outb((char)y, kFlashBase | (x))
-#define READ_FLASH(x)	(inb(kFlashBase | (x)))
-
 
 
 /*
@@ -124,11 +97,6 @@ struct lcd_display {
 //  Button defs
 #define BUTTON_Read             50
 
-//  Flash command codes
-#define FLASH_Erase		60
-#define FLASH_Burn		61
-#define FLASH_Read		62
-
 
 // Ethernet LINK check hackaroo
 #define LINK_Check              90

drivers/net/Kconfig

@@ -2307,27 +2307,6 @@ config MV643XX_ETH
 	  chipset which is used in the Momenco Ocelot C and Jaguar ATX and
 	  Pegasos II, amongst other PPC and MIPS boards.
 
-config MV643XX_ETH_0
-	bool "MV-643XX Port 0"
-	depends on MV643XX_ETH
-	help
-	  This enables support for Port 0 of the Marvell MV643XX Gigabit
-	  Ethernet.
-
-config MV643XX_ETH_1
-	bool "MV-643XX Port 1"
-	depends on MV643XX_ETH
-	help
-	  This enables support for Port 1 of the Marvell MV643XX Gigabit
-	  Ethernet.
-
-config MV643XX_ETH_2
-	bool "MV-643XX Port 2"
-	depends on MV643XX_ETH
-	help
-	  This enables support for Port 2 of the Marvell MV643XX Gigabit
-	  Ethernet.
-
 config QLA3XXX
 	tristate "QLogic QLA3XXX Network Driver Support"
 	depends on PCI