Skip to content

L
linux
Commit d8470596 authored by Ingo Molnar's avatar Ingo Molnar
Browse files
Options

Merge branch 'x86/apic' into x86-v28-for-linus-phase4-B 

Conflicts:
	arch/x86/kernel/apic_32.c
	arch/x86/kernel/apic_64.c
	arch/x86/kernel/setup.c
	drivers/pci/intel-iommu.c
	include/asm-x86/cpufeature.h
	include/asm-x86/dma-mapping.h
parents 725c2581 11494547
Hide whitespace changes
Inline Side-by-side
Showing with 3635 additions and 963 deletions
Documentation/kernel-parameters.txt
View file @ d8470596
......@@ -1424,6 +1424,12 @@ and is between 256 and 4096 characters. It is defined in the file
nolapic_timer [X86-32,APIC] Do not use the local APIC timer.
nox2apic [X86-64,APIC] Do not enable x2APIC mode.
x2apic_phys [X86-64,APIC] Use x2apic physical mode instead of
default x2apic cluster mode on platforms
supporting x2apic.
noltlbs [PPC] Do not use large page/tlb entries for kernel
lowmem mapping on PPC40x.
......
arch/um/sys-x86_64/syscall_table.c
View file @ d8470596
......@@ -41,12 +41,12 @@
#define stub_rt_sigreturn sys_rt_sigreturn
#define __SYSCALL(nr, sym) extern asmlinkage void sym(void) ;
#undef _ASM_X86_64_UNISTD_H_
#undef ASM_X86__UNISTD_64_H
#include <asm-x86/unistd_64.h>
#undef __SYSCALL
#define __SYSCALL(nr, sym) [ nr ] = sym,
#undef _ASM_X86_64_UNISTD_H_
#undef ASM_X86__UNISTD_64_H
typedef void (*sys_call_ptr_t)(void);
......
arch/x86/Kconfig
View file @ d8470596
......@@ -1689,6 +1689,14 @@ config DMAR_FLOPPY_WA
workaround will setup a 1:1 mapping for the first
16M to make floppy (an ISA device) work.
config INTR_REMAP
bool "Support for Interrupt Remapping (EXPERIMENTAL)"
depends on X86_64 && X86_IO_APIC && PCI_MSI && ACPI && EXPERIMENTAL
help
Supports Interrupt remapping for IO-APIC and MSI devices.
To use x2apic mode in the CPU's which support x2APIC enhancements or
to support platforms with CPU's having > 8 bit APIC ID, say Y.
source "drivers/pci/pcie/Kconfig"
source "drivers/pci/Kconfig"
......
arch/x86/mach-es7000/es7000.h → arch/x86/es7000/es7000.h
View file @ d8470596
/*
* Written by: Garry Forsgren, Unisys Corporation
* Natalie Protasevich, Unisys Corporation
* This file contains the code to configure and interface
* This file contains the code to configure and interface
* with Unisys ES7000 series hardware system manager.
*
* Copyright (c) 2003 Unisys Corporation. All Rights Reserved.
......@@ -18,7 +18,7 @@
* with this program; if not, write the Free Software Foundation, Inc., 59
* Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
* Contact information: Unisys Corporation, Township Line & Union Meeting
* Contact information: Unisys Corporation, Township Line & Union Meeting
* Roads-A, Unisys Way, Blue Bell, Pennsylvania, 19424, or:
*
* http://www.unisys.com
......@@ -41,7 +41,7 @@
#define MIP_VALID 0x0100000000000000ULL
#define MIP_PORT(VALUE) ((VALUE >> 32) & 0xffff)
#define MIP_RD_LO(VALUE) (VALUE & 0xffffffff)
#define MIP_RD_LO(VALUE) (VALUE & 0xffffffff)
struct mip_reg_info {
unsigned long long mip_info;
......@@ -51,11 +51,11 @@ struct mip_reg_info {
};
struct part_info {
unsigned char type;
unsigned char type;
unsigned char length;
unsigned char part_id;
unsigned char apic_mode;
unsigned long snum;
unsigned long snum;
char ptype[16];
char sname[64];
char pname[64];
......@@ -68,11 +68,11 @@ struct psai {
};
struct es7000_mem_info {
unsigned char type;
unsigned char type;
unsigned char length;
unsigned char resv[6];
unsigned long long start;
unsigned long long size;
unsigned long long start;
unsigned long long size;
};
struct es7000_oem_table {
......@@ -106,7 +106,7 @@ struct mip_reg {
};
#define MIP_SW_APIC 0x1020b
#define MIP_FUNC(VALUE) (VALUE & 0xff)
#define MIP_FUNC(VALUE) (VALUE & 0xff)
extern int parse_unisys_oem (char *oemptr);
extern void setup_unisys(void);
......
arch/x86/mach-es7000/es7000plat.c → arch/x86/es7000/es7000plat.c
View file @ d8470596
......@@ -72,7 +72,7 @@ es7000_rename_gsi(int ioapic, int gsi)
base += nr_ioapic_registers[i];
}
if (!ioapic && (gsi < 16))
if (!ioapic && (gsi < 16))
gsi += base;
return gsi;
}
......
arch/x86/kernel/Makefile
View file @ d8470596
......@@ -104,6 +104,8 @@ obj-$(CONFIG_OLPC) += olpc.o
ifeq ($(CONFIG_X86_64),y)
obj-y += genapic_64.o genapic_flat_64.o genx2apic_uv_x.o tlb_uv.o
obj-y += bios_uv.o
obj-y += genx2apic_cluster.o
obj-y += genx2apic_phys.o
obj-$(CONFIG_X86_PM_TIMER) += pmtimer_64.o
obj-$(CONFIG_AUDIT) += audit_64.o
......
arch/x86/kernel/acpi/boot.c
View file @ d8470596
......@@ -252,10 +252,8 @@ static void __cpuinit acpi_register_lapic(int id, u8 enabled)
return;
}
#ifdef CONFIG_X86_32
if (boot_cpu_physical_apicid != -1U)
ver = apic_version[boot_cpu_physical_apicid];
#endif
generic_processor_info(id, ver);
}
......@@ -774,11 +772,9 @@ static void __init acpi_register_lapic_address(unsigned long address)
set_fixmap_nocache(FIX_APIC_BASE, address);
if (boot_cpu_physical_apicid == -1U) {
boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
#ifdef CONFIG_X86_32
boot_cpu_physical_apicid = read_apic_id();
apic_version[boot_cpu_physical_apicid] =
GET_APIC_VERSION(apic_read(APIC_LVR));
#endif
}
}
......@@ -1350,7 +1346,9 @@ static void __init acpi_process_madt(void)
acpi_ioapic = 1;
smp_found_config = 1;
#ifdef CONFIG_X86_32
setup_apic_routing();
#endif
}
}
if (error == -EINVAL) {
......
arch/x86/kernel/apic_32.c
View file @ d8470596
......@@ -60,10 +60,8 @@ unsigned long mp_lapic_addr;
static int force_enable_local_apic;
int disable_apic;
/* Local APIC timer verification ok */
static int local_apic_timer_verify_ok;
/* Disable local APIC timer from the kernel commandline or via dmi quirk */
static int local_apic_timer_disabled;
static int disable_apic_timer __cpuinitdata;
/* Local APIC timer works in C2 */
int local_apic_timer_c2_ok;
EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok);
......@@ -130,7 +128,11 @@ static inline int lapic_get_version(void)
*/
static inline int lapic_is_integrated(void)
{
#ifdef CONFIG_X86_64
return 1;
#else
return APIC_INTEGRATED(lapic_get_version());
#endif
}
/*
......@@ -145,13 +147,18 @@ static int modern_apic(void)
return lapic_get_version() >= 0x14;
}
void apic_wait_icr_idle(void)
/*
* Paravirt kernels also might be using these below ops. So we still
* use generic apic_read()/apic_write(), which might be pointing to different
* ops in PARAVIRT case.
*/
void xapic_wait_icr_idle(void)
{
while (apic_read(APIC_ICR) & APIC_ICR_BUSY)
cpu_relax();
}
u32 safe_apic_wait_icr_idle(void)
u32 safe_xapic_wait_icr_idle(void)
{
u32 send_status;
int timeout;
......@@ -167,16 +174,48 @@ u32 safe_apic_wait_icr_idle(void)
return send_status;
}
void xapic_icr_write(u32 low, u32 id)
{
apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(id));
apic_write(APIC_ICR, low);
}
u64 xapic_icr_read(void)
{
u32 icr1, icr2;
icr2 = apic_read(APIC_ICR2);
icr1 = apic_read(APIC_ICR);
return icr1 | ((u64)icr2 << 32);
}
static struct apic_ops xapic_ops = {
.read = native_apic_mem_read,
.write = native_apic_mem_write,
.icr_read = xapic_icr_read,
.icr_write = xapic_icr_write,
.wait_icr_idle = xapic_wait_icr_idle,
.safe_wait_icr_idle = safe_xapic_wait_icr_idle,
};
struct apic_ops __read_mostly *apic_ops = &xapic_ops;
EXPORT_SYMBOL_GPL(apic_ops);
/**
* enable_NMI_through_LVT0 - enable NMI through local vector table 0
*/
void __cpuinit enable_NMI_through_LVT0(void)
{
unsigned int v = APIC_DM_NMI;
unsigned int v;
/* Level triggered for 82489DX */
/* unmask and set to NMI */
v = APIC_DM_NMI;
/* Level triggered for 82489DX (32bit mode) */
if (!lapic_is_integrated())
v |= APIC_LVT_LEVEL_TRIGGER;
apic_write(APIC_LVT0, v);
}
......@@ -193,9 +232,13 @@ int get_physical_broadcast(void)
*/
int lapic_get_maxlvt(void)
{
unsigned int v = apic_read(APIC_LVR);
unsigned int v;
/* 82489DXs do not report # of LVT entries. */
v = apic_read(APIC_LVR);
/*
* - we always have APIC integrated on 64bit mode
* - 82489DXs do not report # of LVT entries
*/
return APIC_INTEGRATED(GET_APIC_VERSION(v)) ? GET_APIC_MAXLVT(v) : 2;
}
......@@ -203,8 +246,12 @@ int lapic_get_maxlvt(void)
* Local APIC timer
*/
/* Clock divisor is set to 16 */
/* Clock divisor */
#ifdef CONFG_X86_64
#define APIC_DIVISOR 1
#else
#define APIC_DIVISOR 16
#endif
/*
* This function sets up the local APIC timer, with a timeout of
......@@ -212,6 +259,9 @@ int lapic_get_maxlvt(void)
* this function twice on the boot CPU, once with a bogus timeout
* value, second time for real. The other (noncalibrating) CPUs
* call this function only once, with the real, calibrated value.
*
* We do reads before writes even if unnecessary, to get around the
* P5 APIC double write bug.
*/
static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
{
......@@ -233,13 +283,43 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
*/
tmp_value = apic_read(APIC_TDCR);
apic_write(APIC_TDCR,
(tmp_value & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) |
APIC_TDR_DIV_16);
(tmp_value & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) |
APIC_TDR_DIV_16);
if (!oneshot)
apic_write(APIC_TMICT, clocks / APIC_DIVISOR);
}
/*
* Setup extended LVT, AMD specific (K8, family 10h)
*
* Vector mappings are hard coded. On K8 only offset 0 (APIC500) and
* MCE interrupts are supported. Thus MCE offset must be set to 0.
*/
#define APIC_EILVT_LVTOFF_MCE 0
#define APIC_EILVT_LVTOFF_IBS 1
static void setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask)
{
unsigned long reg = (lvt_off << 4) + APIC_EILVT0;
unsigned int v = (mask << 16) | (msg_type << 8) | vector;
apic_write(reg, v);
}
u8 setup_APIC_eilvt_mce(u8 vector, u8 msg_type, u8 mask)
{
setup_APIC_eilvt(APIC_EILVT_LVTOFF_MCE, vector, msg_type, mask);
return APIC_EILVT_LVTOFF_MCE;
}
u8 setup_APIC_eilvt_ibs(u8 vector, u8 msg_type, u8 mask)
{
setup_APIC_eilvt(APIC_EILVT_LVTOFF_IBS, vector, msg_type, mask);
return APIC_EILVT_LVTOFF_IBS;
}
/*
* Program the next event, relative to now
*/
......@@ -259,8 +339,8 @@ static void lapic_timer_setup(enum clock_event_mode mode,
unsigned long flags;
unsigned int v;
/* Lapic used for broadcast ? */
if (!local_apic_timer_verify_ok)
/* Lapic used as dummy for broadcast ? */
if (evt->features & CLOCK_EVT_FEAT_DUMMY)
return;
local_irq_save(flags);
......@@ -473,7 +553,7 @@ static int __init calibrate_APIC_clock(void)
return -1;
}
local_apic_timer_verify_ok = 1;
levt->features &= ~CLOCK_EVT_FEAT_DUMMY;
/* We trust the pm timer based calibration */
if (!pm_referenced) {
......@@ -507,11 +587,11 @@ static int __init calibrate_APIC_clock(void)
if (deltaj >= LAPIC_CAL_LOOPS-2 && deltaj <= LAPIC_CAL_LOOPS+2)
apic_printk(APIC_VERBOSE, "... jiffies result ok\n");
else
local_apic_timer_verify_ok = 0;
levt->features |= CLOCK_EVT_FEAT_DUMMY;
} else
local_irq_enable();
if (!local_apic_timer_verify_ok) {
if (levt->features & CLOCK_EVT_FEAT_DUMMY) {
printk(KERN_WARNING
"APIC timer disabled due to verification failure.\n");
return -1;
......@@ -533,7 +613,8 @@ void __init setup_boot_APIC_clock(void)
* timer as a dummy clock event source on SMP systems, so the
* broadcast mechanism is used. On UP systems simply ignore it.
*/
if (local_apic_timer_disabled) {
if (disable_apic_timer) {
printk(KERN_INFO "Disabling APIC timer\n");
/* No broadcast on UP ! */
if (num_possible_cpus() > 1) {
lapic_clockevent.mult = 1;
......@@ -602,7 +683,11 @@ static void local_apic_timer_interrupt(void)
/*
* the NMI deadlock-detector uses this.
*/
#ifdef CONFIG_X86_64
add_pda(apic_timer_irqs, 1);
#else
per_cpu(irq_stat, cpu).apic_timer_irqs++;
#endif
evt->event_handler(evt);
}
......@@ -641,35 +726,6 @@ int setup_profiling_timer(unsigned int multiplier)
return -EINVAL;
}
/*
* Setup extended LVT, AMD specific (K8, family 10h)
*
* Vector mappings are hard coded. On K8 only offset 0 (APIC500) and
* MCE interrupts are supported. Thus MCE offset must be set to 0.
*/
#define APIC_EILVT_LVTOFF_MCE 0
#define APIC_EILVT_LVTOFF_IBS 1
static void setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask)
{
unsigned long reg = (lvt_off << 4) + APIC_EILVT0;
unsigned int v = (mask << 16) | (msg_type << 8) | vector;
apic_write(reg, v);
}
u8 setup_APIC_eilvt_mce(u8 vector, u8 msg_type, u8 mask)
{
setup_APIC_eilvt(APIC_EILVT_LVTOFF_MCE, vector, msg_type, mask);
return APIC_EILVT_LVTOFF_MCE;
}
u8 setup_APIC_eilvt_ibs(u8 vector, u8 msg_type, u8 mask)
{
setup_APIC_eilvt(APIC_EILVT_LVTOFF_IBS, vector, msg_type, mask);
return APIC_EILVT_LVTOFF_IBS;
}
/*
* Local APIC start and shutdown
*/
......@@ -715,7 +771,7 @@ void clear_local_APIC(void)
}
/* lets not touch this if we didn't frob it */
#ifdef CONFIG_X86_MCE_P4THERMAL
#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(X86_MCE_INTEL)
if (maxlvt >= 5) {
v = apic_read(APIC_LVTTHMR);
apic_write(APIC_LVTTHMR, v | APIC_LVT_MASKED);
......@@ -732,10 +788,6 @@ void clear_local_APIC(void)
if (maxlvt >= 4)
apic_write(APIC_LVTPC, APIC_LVT_MASKED);
#ifdef CONFIG_X86_MCE_P4THERMAL
if (maxlvt >= 5)
apic_write(APIC_LVTTHMR, APIC_LVT_MASKED);
#endif
/* Integrated APIC (!82489DX) ? */
if (lapic_is_integrated()) {
if (maxlvt > 3)
......@@ -750,7 +802,7 @@ void clear_local_APIC(void)
*/
void disable_local_APIC(void)
{
unsigned long value;
unsigned int value;
clear_local_APIC();
......@@ -762,6 +814,7 @@ void disable_local_APIC(void)
value &= ~APIC_SPIV_APIC_ENABLED;
apic_write(APIC_SPIV, value);
#ifdef CONFIG_X86_32
/*
* When LAPIC was disabled by the BIOS and enabled by the kernel,
* restore the disabled state.
......@@ -773,6 +826,7 @@ void disable_local_APIC(void)
l &= ~MSR_IA32_APICBASE_ENABLE;
wrmsr(MSR_IA32_APICBASE, l, h);
}
#endif
}
/*
......@@ -789,11 +843,15 @@ void lapic_shutdown(void)
return;
local_irq_save(flags);
clear_local_APIC();
if (enabled_via_apicbase)
#ifdef CONFIG_X86_32
if (!enabled_via_apicbase)
clear_local_APIC();
else
#endif
disable_local_APIC();
local_irq_restore(flags);
}
......@@ -838,6 +896,12 @@ int __init verify_local_APIC(void)
*/
reg0 = apic_read(APIC_ID);
apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0);
apic_write(APIC_ID, reg0 ^ APIC_ID_MASK);
reg1 = apic_read(APIC_ID);
apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg1);
apic_write(APIC_ID, reg0);
if (reg1 != (reg0 ^ APIC_ID_MASK))
return 0;
/*
* The next two are just to see if we have sane values.
......@@ -863,14 +927,15 @@ void __init sync_Arb_IDs(void)
*/
if (modern_apic() || boot_cpu_data.x86_vendor == X86_VENDOR_AMD)
return;
/*
* Wait for idle.
*/
apic_wait_icr_idle();
apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n");
apic_write(APIC_ICR,
APIC_DEST_ALLINC | APIC_INT_LEVELTRIG | APIC_DM_INIT);
apic_write(APIC_ICR, APIC_DEST_ALLINC |
APIC_INT_LEVELTRIG | APIC_DM_INIT);
}
/*
......@@ -878,7 +943,7 @@ void __init sync_Arb_IDs(void)
*/
void __init init_bsp_APIC(void)
{
unsigned long value;
unsigned int value;
/*
* Don't do the setup now if we have a SMP BIOS as the
......@@ -899,11 +964,13 @@ void __init init_bsp_APIC(void)
value &= ~APIC_VECTOR_MASK;
value |= APIC_SPIV_APIC_ENABLED;
#ifdef CONFIG_X86_32
/* This bit is reserved on P4/Xeon and should be cleared */
if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
(boot_cpu_data.x86 == 15))
value &= ~APIC_SPIV_FOCUS_DISABLED;
else
#endif
value |= APIC_SPIV_FOCUS_DISABLED;
value |= SPURIOUS_APIC_VECTOR;
apic_write(APIC_SPIV, value);
......@@ -922,6 +989,16 @@ static void __cpuinit lapic_setup_esr(void)
{
unsigned long oldvalue, value, maxlvt;
if (lapic_is_integrated() && !esr_disable) {
if (esr_disable) {
/*
* Something untraceable is creating bad interrupts on
* secondary quads ... for the moment, just leave the
* ESR disabled - we can't do anything useful with the
* errors anyway - mbligh
*/
printk(KERN_INFO "Leaving ESR disabled.\n");
return;
}
/* !82489DX */
maxlvt = lapic_get_maxlvt();
if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
......@@ -942,16 +1019,7 @@ static void __cpuinit lapic_setup_esr(void)
"vector: 0x%08lx after: 0x%08lx\n",
oldvalue, value);
} else {
if (esr_disable)
/*
* Something untraceable is creating bad interrupts on
* secondary quads ... for the moment, just leave the
* ESR disabled - we can't do anything useful with the
* errors anyway - mbligh
*/
printk(KERN_INFO "Leaving ESR disabled.\n");
else
printk(KERN_INFO "No ESR for 82489DX.\n");
printk(KERN_INFO "No ESR for 82489DX.\n");
}
}
......@@ -1089,13 +1157,17 @@ void __cpuinit setup_local_APIC(void)
void __cpuinit end_local_APIC_setup(void)
{
unsigned long value;
lapic_setup_esr();
/* Disable the local apic timer */
value = apic_read(APIC_LVTT);
value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
apic_write(APIC_LVTT, value);
#ifdef CONFIG_X86_32
{
unsigned int value;
/* Disable the local apic timer */
value = apic_read(APIC_LVTT);
value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
apic_write(APIC_LVTT, value);
}
#endif
setup_apic_nmi_watchdog(NULL);
apic_pm_activate();
......@@ -1205,7 +1277,7 @@ void __init init_apic_mappings(void)
* default configuration (or the MP table is broken).
*/
if (boot_cpu_physical_apicid == -1U)
boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
boot_cpu_physical_apicid = read_apic_id();
}
......@@ -1242,7 +1314,7 @@ int __init APIC_init_uniprocessor(void)
* might be zero if read from MP tables. Get it from LAPIC.
*/
#ifdef CONFIG_CRASH_DUMP
boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
boot_cpu_physical_apicid = read_apic_id();
#endif
physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map);
......@@ -1321,59 +1393,12 @@ void smp_error_interrupt(struct pt_regs *regs)
irq_exit();
}
#ifdef CONFIG_SMP
void __init smp_intr_init(void)
{
/*
* IRQ0 must be given a fixed assignment and initialized,
* because it's used before the IO-APIC is set up.
*/
set_intr_gate(FIRST_DEVICE_VECTOR, interrupt[0]);
/*
* The reschedule interrupt is a CPU-to-CPU reschedule-helper
* IPI, driven by wakeup.
*/
alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
/* IPI for invalidation */
alloc_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt);
/* IPI for generic function call */
alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
/* IPI for single call function */
set_intr_gate(CALL_FUNCTION_SINGLE_VECTOR,
call_function_single_interrupt);
}
#endif
/*
* Initialize APIC interrupts
*/
void __init apic_intr_init(void)
{
#ifdef CONFIG_SMP
smp_intr_init();
#endif
/* self generated IPI for local APIC timer */
alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
/* IPI vectors for APIC spurious and error interrupts */
alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
/* thermal monitor LVT interrupt */
#ifdef CONFIG_X86_MCE_P4THERMAL
alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
#endif
}
/**
* connect_bsp_APIC - attach the APIC to the interrupt system
*/
void __init connect_bsp_APIC(void)
{
#ifdef CONFIG_X86_32
if (pic_mode) {
/*
* Do not trust the local APIC being empty at bootup.
......@@ -1388,6 +1413,7 @@ void __init connect_bsp_APIC(void)
outb(0x70, 0x22);
outb(0x01, 0x23);
}
#endif
enable_apic_mode();
}
......@@ -1400,6 +1426,9 @@ void __init connect_bsp_APIC(void)
*/
void disconnect_bsp_APIC(int virt_wire_setup)
{
unsigned int value;
#ifdef CONFIG_X86_32
if (pic_mode) {
/*
* Put the board back into PIC mode (has an effect only on
......@@ -1411,54 +1440,53 @@ void disconnect_bsp_APIC(int virt_wire_setup)
"entering PIC mode.\n");
outb(0x70, 0x22);
outb(0x00, 0x23);
} else {
/* Go back to Virtual Wire compatibility mode */
unsigned long value;
return;
}
#endif
/* For the spurious interrupt use vector F, and enable it */
value = apic_read(APIC_SPIV);
value &= ~APIC_VECTOR_MASK;
value |= APIC_SPIV_APIC_ENABLED;
value |= 0xf;
apic_write(APIC_SPIV, value);
/* Go back to Virtual Wire compatibility mode */
if (!virt_wire_setup) {
/*
* For LVT0 make it edge triggered, active high,
* external and enabled
*/
value = apic_read(APIC_LVT0);
value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
apic_write(APIC_LVT0, value);
} else {
/* Disable LVT0 */
apic_write(APIC_LVT0, APIC_LVT_MASKED);
}
/* For the spurious interrupt use vector F, and enable it */
value = apic_read(APIC_SPIV);
value &= ~APIC_VECTOR_MASK;
value |= APIC_SPIV_APIC_ENABLED;
value |= 0xf;
apic_write(APIC_SPIV, value);
if (!virt_wire_setup) {
/*
* For LVT1 make it edge triggered, active high, nmi and
* enabled
* For LVT0 make it edge triggered, active high,
* external and enabled
*/
value = apic_read(APIC_LVT1);
value &= ~(
APIC_MODE_MASK | APIC_SEND_PENDING |
value = apic_read(APIC_LVT0);
value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI);
apic_write(APIC_LVT1, value);
value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
apic_write(APIC_LVT0, value);
} else {
/* Disable LVT0 */
apic_write(APIC_LVT0, APIC_LVT_MASKED);
}
/*
* For LVT1 make it edge triggered, active high,
* nmi and enabled
*/
value = apic_read(APIC_LVT1);
value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI);
apic_write(APIC_LVT1, value);
}
void __cpuinit generic_processor_info(int apicid, int version)
{
int cpu;
cpumask_t tmp_map;
physid_mask_t phys_cpu;
/*
* Validate version
......@@ -1471,9 +1499,6 @@ void __cpuinit generic_processor_info(int apicid, int version)
}
apic_version[apicid] = version;
phys_cpu = apicid_to_cpu_present(apicid);
physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu);
if (num_processors >= NR_CPUS) {
printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
" Processor ignored.\n", NR_CPUS);
......@@ -1484,17 +1509,19 @@ void __cpuinit generic_processor_info(int apicid, int version)
cpus_complement(tmp_map, cpu_present_map);
cpu = first_cpu(tmp_map);
if (apicid == boot_cpu_physical_apicid)
physid_set(apicid, phys_cpu_present_map);
if (apicid == boot_cpu_physical_apicid) {
/*
* x86_bios_cpu_apicid is required to have processors listed
* in same order as logical cpu numbers. Hence the first
* entry is BSP, and so on.
*/
cpu = 0;
}
if (apicid > max_physical_apicid)
max_physical_apicid = apicid;
#ifdef CONFIG_X86_32
/*
* Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y
* but we need to work other dependencies like SMP_SUSPEND etc
......@@ -1514,7 +1541,9 @@ void __cpuinit generic_processor_info(int apicid, int version)
def_to_bigsmp = 1;
}
}
#ifdef CONFIG_SMP
#endif
#if defined(CONFIG_X86_SMP) || defined(CONFIG_X86_64)
/* are we being called early in kernel startup? */
if (early_per_cpu_ptr(x86_cpu_to_apicid)) {
u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid);
......@@ -1527,6 +1556,7 @@ void __cpuinit generic_processor_info(int apicid, int version)
per_cpu(x86_bios_cpu_apicid, cpu) = apicid;
}
#endif
cpu_set(cpu, cpu_possible_map);
cpu_set(cpu, cpu_present_map);
}
......@@ -1537,6 +1567,11 @@ void __cpuinit generic_processor_info(int apicid, int version)
#ifdef CONFIG_PM
static struct {
/*
* 'active' is true if the local APIC was enabled by us and
* not the BIOS; this signifies that we are also responsible
* for disabling it before entering apm/acpi suspend
*/
int active;
/* r/w apic fields */
unsigned int apic_id;
......@@ -1577,7 +1612,7 @@ static int lapic_suspend(struct sys_device *dev, pm_message_t state)
apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR);
apic_pm_state.apic_tmict = apic_read(APIC_TMICT);
apic_pm_state.apic_tdcr = apic_read(APIC_TDCR);
#ifdef CONFIG_X86_MCE_P4THERMAL
#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL)
if (maxlvt >= 5)
apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR);
#endif
......@@ -1601,16 +1636,23 @@ static int lapic_resume(struct sys_device *dev)
local_irq_save(flags);
/*
* Make sure the APICBASE points to the right address
*
* FIXME! This will be wrong if we ever support suspend on
* SMP! We'll need to do this as part of the CPU restore!
*/
rdmsr(MSR_IA32_APICBASE, l, h);
l &= ~MSR_IA32_APICBASE_BASE;
l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
wrmsr(MSR_IA32_APICBASE, l, h);
#ifdef CONFIG_X86_64
if (x2apic)
enable_x2apic();
else
#endif
{
/*
* Make sure the APICBASE points to the right address
*
* FIXME! This will be wrong if we ever support suspend on
* SMP! We'll need to do this as part of the CPU restore!
*/
rdmsr(MSR_IA32_APICBASE, l, h);
l &= ~MSR_IA32_APICBASE_BASE;
l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
wrmsr(MSR_IA32_APICBASE, l, h);
}
apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED);
apic_write(APIC_ID, apic_pm_state.apic_id);
......@@ -1620,7 +1662,7 @@ static int lapic_resume(struct sys_device *dev)
apic_write(APIC_SPIV, apic_pm_state.apic_spiv);
apic_write(APIC_LVT0, apic_pm_state.apic_lvt0);
apic_write(APIC_LVT1, apic_pm_state.apic_lvt1);
#ifdef CONFIG_X86_MCE_P4THERMAL
#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL)
if (maxlvt >= 5)
apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr);
#endif
......@@ -1634,7 +1676,9 @@ static int lapic_resume(struct sys_device *dev)
apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr);
apic_write(APIC_ESR, 0);
apic_read(APIC_ESR);
local_irq_restore(flags);
return 0;
}
......@@ -1690,20 +1734,20 @@ static int __init parse_lapic(char *arg)
}
early_param("lapic", parse_lapic);
static int __init parse_nolapic(char *arg)
static int __init setup_disableapic(char *arg)
{
disable_apic = 1;
setup_clear_cpu_cap(X86_FEATURE_APIC);
return 0;
}
early_param("nolapic", parse_nolapic);
early_param("disableapic", setup_disableapic);
static int __init parse_disable_lapic_timer(char *arg)
/* same as disableapic, for compatibility */
static int __init setup_nolapic(char *arg)
{
local_apic_timer_disabled = 1;
return 0;
return setup_disableapic(arg);
}
early_param("nolapic_timer", parse_disable_lapic_timer);
early_param("nolapic", setup_nolapic);
static int __init parse_lapic_timer_c2_ok(char *arg)
{
......@@ -1712,15 +1756,40 @@ static int __init parse_lapic_timer_c2_ok(char *arg)
}
early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok);
static int __init parse_disable_apic_timer(char *arg)
{
disable_apic_timer = 1;
return 0;
}
early_param("noapictimer", parse_disable_apic_timer);
static int __init parse_nolapic_timer(char *arg)
{
disable_apic_timer = 1;
return 0;
}
early_param("nolapic_timer", parse_nolapic_timer);
static int __init apic_set_verbosity(char *arg)
{
if (!arg)
if (!arg) {
#ifdef CONFIG_X86_64
skip_ioapic_setup = 0;
ioapic_force = 1;
return 0;
#endif
return -EINVAL;
}
if (strcmp(arg, "debug") == 0)
if (strcmp("debug", arg) == 0)
apic_verbosity = APIC_DEBUG;
else if (strcmp(arg, "verbose") == 0)
else if (strcmp("verbose", arg) == 0)
apic_verbosity = APIC_VERBOSE;
else {
printk(KERN_WARNING "APIC Verbosity level %s not recognised"
" use apic=verbose or apic=debug\n", arg);
return -EINVAL;
}
return 0;
}
......
arch/x86/kernel/apic_64.c
View file @ d8470596
......@@ -27,6 +27,7 @@
#include <linux/clockchips.h>
#include <linux/acpi_pmtmr.h>
#include <linux/module.h>
#include <linux/dmar.h>
#include <asm/atomic.h>
#include <asm/smp.h>
......@@ -39,13 +40,20 @@
#include <asm/proto.h>
#include <asm/timex.h>
#include <asm/apic.h>
#include <asm/i8259.h>
#include <mach_ipi.h>
#include <mach_apic.h>
/* Disable local APIC timer from the kernel commandline or via dmi quirk */
static int disable_apic_timer __cpuinitdata;
static int apic_calibrate_pmtmr __initdata;
int disable_apic;
int disable_x2apic;
int x2apic;
/* x2apic enabled before OS handover */
int x2apic_preenabled;
/* Local APIC timer works in C2 */
int local_apic_timer_c2_ok;
......@@ -73,6 +81,9 @@ static void lapic_timer_setup(enum clock_event_mode mode,
static void lapic_timer_broadcast(cpumask_t mask);
static void apic_pm_activate(void);
/*
* The local apic timer can be used for any function which is CPU local.
*/
static struct clock_event_device lapic_clockevent = {
.name = "lapic",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT
......@@ -99,11 +110,15 @@ static inline int lapic_get_version(void)
}
/*
* Check, if the APIC is integrated or a seperate chip
* Check, if the APIC is integrated or a separate chip
*/
static inline int lapic_is_integrated(void)
{
#ifdef CONFIG_X86_64
return 1;
#else
return APIC_INTEGRATED(lapic_get_version());
#endif
}
/*
......@@ -118,13 +133,18 @@ static int modern_apic(void)
return lapic_get_version() >= 0x14;
}
void apic_wait_icr_idle(void)
/*
* Paravirt kernels also might be using these below ops. So we still
* use generic apic_read()/apic_write(), which might be pointing to different
* ops in PARAVIRT case.
*/
void xapic_wait_icr_idle(void)
{
while (apic_read(APIC_ICR) & APIC_ICR_BUSY)
cpu_relax();
}
u32 safe_apic_wait_icr_idle(void)
u32 safe_xapic_wait_icr_idle(void)
{
u32 send_status;
int timeout;
......@@ -140,6 +160,68 @@ u32 safe_apic_wait_icr_idle(void)
return send_status;
}
void xapic_icr_write(u32 low, u32 id)
{
apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(id));
apic_write(APIC_ICR, low);
}
u64 xapic_icr_read(void)
{
u32 icr1, icr2;
icr2 = apic_read(APIC_ICR2);
icr1 = apic_read(APIC_ICR);
return icr1 | ((u64)icr2 << 32);
}
static struct apic_ops xapic_ops = {
.read = native_apic_mem_read,
.write = native_apic_mem_write,
.icr_read = xapic_icr_read,
.icr_write = xapic_icr_write,
.wait_icr_idle = xapic_wait_icr_idle,
.safe_wait_icr_idle = safe_xapic_wait_icr_idle,
};
struct apic_ops __read_mostly *apic_ops = &xapic_ops;
EXPORT_SYMBOL_GPL(apic_ops);
static void x2apic_wait_icr_idle(void)
{
/* no need to wait for icr idle in x2apic */
return;
}
static u32 safe_x2apic_wait_icr_idle(void)
{
/* no need to wait for icr idle in x2apic */
return 0;
}
void x2apic_icr_write(u32 low, u32 id)
{
wrmsrl(APIC_BASE_MSR + (APIC_ICR >> 4), ((__u64) id) << 32 | low);
}
u64 x2apic_icr_read(void)
{
unsigned long val;
rdmsrl(APIC_BASE_MSR + (APIC_ICR >> 4), val);
return val;
}
static struct apic_ops x2apic_ops = {
.read = native_apic_msr_read,
.write = native_apic_msr_write,
.icr_read = x2apic_icr_read,
.icr_write = x2apic_icr_write,
.wait_icr_idle = x2apic_wait_icr_idle,
.safe_wait_icr_idle = safe_x2apic_wait_icr_idle,
};
/**
* enable_NMI_through_LVT0 - enable NMI through local vector table 0
*/
......@@ -149,6 +231,11 @@ void __cpuinit enable_NMI_through_LVT0(void)
/* unmask and set to NMI */
v = APIC_DM_NMI;
/* Level triggered for 82489DX (32bit mode) */
if (!lapic_is_integrated())
v |= APIC_LVT_LEVEL_TRIGGER;
apic_write(APIC_LVT0, v);
}
......@@ -157,13 +244,27 @@ void __cpuinit enable_NMI_through_LVT0(void)
*/
int lapic_get_maxlvt(void)
{
unsigned int v, maxlvt;
unsigned int v;
v = apic_read(APIC_LVR);
maxlvt = GET_APIC_MAXLVT(v);
return maxlvt;
/*
* - we always have APIC integrated on 64bit mode
* - 82489DXs do not report # of LVT entries
*/
return APIC_INTEGRATED(GET_APIC_VERSION(v)) ? GET_APIC_MAXLVT(v) : 2;
}
/*
* Local APIC timer
*/
/* Clock divisor */
#ifdef CONFG_X86_64
#define APIC_DIVISOR 1
#else
#define APIC_DIVISOR 16
#endif
/*
* This function sets up the local APIC timer, with a timeout of
* 'clocks' APIC bus clock. During calibration we actually call
......@@ -174,7 +275,6 @@ int lapic_get_maxlvt(void)
* We do reads before writes even if unnecessary, to get around the
* P5 APIC double write bug.
*/
static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
{
unsigned int lvtt_value, tmp_value;
......@@ -182,6 +282,9 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
lvtt_value = LOCAL_TIMER_VECTOR;
if (!oneshot)
lvtt_value |= APIC_LVT_TIMER_PERIODIC;
if (!lapic_is_integrated())
lvtt_value |= SET_APIC_TIMER_BASE(APIC_TIMER_BASE_DIV);
if (!irqen)
lvtt_value |= APIC_LVT_MASKED;
......@@ -191,12 +294,12 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
* Divide PICLK by 16
*/
tmp_value = apic_read(APIC_TDCR);
apic_write(APIC_TDCR, (tmp_value
& ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE))
| APIC_TDR_DIV_16);
apic_write(APIC_TDCR,
(tmp_value & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) |
APIC_TDR_DIV_16);
if (!oneshot)
apic_write(APIC_TMICT, clocks);
apic_write(APIC_TMICT, clocks / APIC_DIVISOR);
}
/*
......@@ -366,7 +469,7 @@ static int __init calibrate_APIC_clock(void)
lapic_clockevent.min_delta_ns =
clockevent_delta2ns(0xF, &lapic_clockevent);
calibration_result = result / HZ;
calibration_result = (result * APIC_DIVISOR) / HZ;
/*
* Do a sanity check on the APIC calibration result
......@@ -388,10 +491,10 @@ static int __init calibrate_APIC_clock(void)
void __init setup_boot_APIC_clock(void)
{
/*
* The local apic timer can be disabled via the kernel commandline.
* Register the lapic timer as a dummy clock event source on SMP
* systems, so the broadcast mechanism is used. On UP systems simply
* ignore it.
* The local apic timer can be disabled via the kernel
* commandline or from the CPU detection code. Register the lapic
* timer as a dummy clock event source on SMP systems, so the
* broadcast mechanism is used. On UP systems simply ignore it.
*/
if (disable_apic_timer) {
printk(KERN_INFO "Disabling APIC timer\n");
......@@ -403,7 +506,9 @@ void __init setup_boot_APIC_clock(void)
return;
}
printk(KERN_INFO "Using local APIC timer interrupts.\n");
apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n"
"calibrating APIC timer ...\n");
if (calibrate_APIC_clock()) {
/* No broadcast on UP ! */
if (num_possible_cpus() > 1)
......@@ -422,6 +527,7 @@ void __init setup_boot_APIC_clock(void)
printk(KERN_WARNING "APIC timer registered as dummy,"
" due to nmi_watchdog=%d!\n", nmi_watchdog);
/* Setup the lapic or request the broadcast */
setup_APIC_timer();
}
......@@ -460,7 +566,11 @@ static void local_apic_timer_interrupt(void)
/*
* the NMI deadlock-detector uses this.
*/
#ifdef CONFIG_X86_64
add_pda(apic_timer_irqs, 1);
#else
per_cpu(irq_stat, cpu).apic_timer_irqs++;
#endif
evt->event_handler(evt);
}
......@@ -491,6 +601,7 @@ void smp_apic_timer_interrupt(struct pt_regs *regs)
irq_enter();
local_apic_timer_interrupt();
irq_exit();
set_irq_regs(old_regs);
}
......@@ -544,6 +655,13 @@ void clear_local_APIC(void)
apic_write(APIC_LVTPC, v | APIC_LVT_MASKED);
}
/* lets not touch this if we didn't frob it */
#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(X86_MCE_INTEL)
if (maxlvt >= 5) {
v = apic_read(APIC_LVTTHMR);
apic_write(APIC_LVTTHMR, v | APIC_LVT_MASKED);
}
#endif
/*
* Clean APIC state for other OSs:
*/
......@@ -554,8 +672,14 @@ void clear_local_APIC(void)
apic_write(APIC_LVTERR, APIC_LVT_MASKED);
if (maxlvt >= 4)
apic_write(APIC_LVTPC, APIC_LVT_MASKED);
apic_write(APIC_ESR, 0);
apic_read(APIC_ESR);
/* Integrated APIC (!82489DX) ? */
if (lapic_is_integrated()) {
if (maxlvt > 3)
/* Clear ESR due to Pentium errata 3AP and 11AP */
apic_write(APIC_ESR, 0);
apic_read(APIC_ESR);
}
}
/**
......@@ -574,8 +698,28 @@ void disable_local_APIC(void)
value = apic_read(APIC_SPIV);
value &= ~APIC_SPIV_APIC_ENABLED;
apic_write(APIC_SPIV, value);
#ifdef CONFIG_X86_32
/*
* When LAPIC was disabled by the BIOS and enabled by the kernel,
* restore the disabled state.
*/
if (enabled_via_apicbase) {
unsigned int l, h;
rdmsr(MSR_IA32_APICBASE, l, h);
l &= ~MSR_IA32_APICBASE_ENABLE;
wrmsr(MSR_IA32_APICBASE, l, h);
}
#endif
}
/*
* If Linux enabled the LAPIC against the BIOS default disable it down before
* re-entering the BIOS on shutdown. Otherwise the BIOS may get confused and
* not power-off. Additionally clear all LVT entries before disable_local_APIC
* for the case where Linux didn't enable the LAPIC.
*/
void lapic_shutdown(void)
{
unsigned long flags;
......@@ -585,7 +729,13 @@ void lapic_shutdown(void)
local_irq_save(flags);
disable_local_APIC();
#ifdef CONFIG_X86_32
if (!enabled_via_apicbase)
clear_local_APIC();
else
#endif
disable_local_APIC();
local_irq_restore(flags);
}
......@@ -629,10 +779,10 @@ int __init verify_local_APIC(void)
/*
* The ID register is read/write in a real APIC.
*/
reg0 = read_apic_id();
reg0 = apic_read(APIC_ID);
apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0);
apic_write(APIC_ID, reg0 ^ APIC_ID_MASK);
reg1 = read_apic_id();
reg1 = apic_read(APIC_ID);
apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg1);
apic_write(APIC_ID, reg0);
if (reg1 != (reg0 ^ APIC_ID_MASK))
......@@ -656,8 +806,11 @@ int __init verify_local_APIC(void)
*/
void __init sync_Arb_IDs(void)
{
/* Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 */
if (modern_apic())
/*
* Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 And not
* needed on AMD.
*/
if (modern_apic() || boot_cpu_data.x86_vendor == X86_VENDOR_AMD)
return;
/*
......@@ -666,8 +819,8 @@ void __init sync_Arb_IDs(void)
apic_wait_icr_idle();
apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n");
apic_write(APIC_ICR, APIC_DEST_ALLINC | APIC_INT_LEVELTRIG
| APIC_DM_INIT);
apic_write(APIC_ICR, APIC_DEST_ALLINC |
APIC_INT_LEVELTRIG | APIC_DM_INIT);
}
/*
......@@ -684,8 +837,6 @@ void __init init_bsp_APIC(void)
if (smp_found_config || !cpu_has_apic)
return;
value = apic_read(APIC_LVR);
/*
* Do not trust the local APIC being empty at bootup.
*/
......@@ -697,7 +848,15 @@ void __init init_bsp_APIC(void)
value = apic_read(APIC_SPIV);
value &= ~APIC_VECTOR_MASK;
value |= APIC_SPIV_APIC_ENABLED;
value |= APIC_SPIV_FOCUS_DISABLED;
#ifdef CONFIG_X86_32
/* This bit is reserved on P4/Xeon and should be cleared */
if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
(boot_cpu_data.x86 == 15))
value &= ~APIC_SPIV_FOCUS_DISABLED;
else
#endif
value |= APIC_SPIV_FOCUS_DISABLED;
value |= SPURIOUS_APIC_VECTOR;
apic_write(APIC_SPIV, value);
......@@ -706,9 +865,50 @@ void __init init_bsp_APIC(void)
*/
apic_write(APIC_LVT0, APIC_DM_EXTINT);
value = APIC_DM_NMI;
if (!lapic_is_integrated()) /* 82489DX */
value |= APIC_LVT_LEVEL_TRIGGER;
apic_write(APIC_LVT1, value);
}
static void __cpuinit lapic_setup_esr(void)
{
unsigned long oldvalue, value, maxlvt;
if (lapic_is_integrated() && !esr_disable) {
if (esr_disable) {
/*
* Something untraceable is creating bad interrupts on
* secondary quads ... for the moment, just leave the
* ESR disabled - we can't do anything useful with the
* errors anyway - mbligh
*/
printk(KERN_INFO "Leaving ESR disabled.\n");
return;
}
/* !82489DX */
maxlvt = lapic_get_maxlvt();
if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
apic_write(APIC_ESR, 0);
oldvalue = apic_read(APIC_ESR);
/* enables sending errors */
value = ERROR_APIC_VECTOR;
apic_write(APIC_LVTERR, value);
/*
* spec says clear errors after enabling vector.
*/
if (maxlvt > 3)
apic_write(APIC_ESR, 0);
value = apic_read(APIC_ESR);
if (value != oldvalue)
apic_printk(APIC_VERBOSE, "ESR value before enabling "
"vector: 0x%08lx after: 0x%08lx\n",
oldvalue, value);
} else {
printk(KERN_INFO "No ESR for 82489DX.\n");
}
}
/**
* setup_local_APIC - setup the local APIC
*/
......@@ -814,25 +1014,143 @@ void __cpuinit setup_local_APIC(void)
preempt_enable();
}
static void __cpuinit lapic_setup_esr(void)
{
unsigned maxlvt = lapic_get_maxlvt();
apic_write(APIC_LVTERR, ERROR_APIC_VECTOR);
/*
* spec says clear errors after enabling vector.
*/
if (maxlvt > 3)
apic_write(APIC_ESR, 0);
}
void __cpuinit end_local_APIC_setup(void)
{
lapic_setup_esr();
#ifdef CONFIG_X86_32
{
unsigned int value;
/* Disable the local apic timer */
value = apic_read(APIC_LVTT);
value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
apic_write(APIC_LVTT, value);
}
#endif
setup_apic_nmi_watchdog(NULL);
apic_pm_activate();
}
void check_x2apic(void)
{
int msr, msr2;
rdmsr(MSR_IA32_APICBASE, msr, msr2);
if (msr & X2APIC_ENABLE) {
printk("x2apic enabled by BIOS, switching to x2apic ops\n");
x2apic_preenabled = x2apic = 1;
apic_ops = &x2apic_ops;
}
}
void enable_x2apic(void)
{
int msr, msr2;
rdmsr(MSR_IA32_APICBASE, msr, msr2);
if (!(msr & X2APIC_ENABLE)) {
printk("Enabling x2apic\n");
wrmsr(MSR_IA32_APICBASE, msr | X2APIC_ENABLE, 0);
}
}
void enable_IR_x2apic(void)
{
#ifdef CONFIG_INTR_REMAP
int ret;
unsigned long flags;
if (!cpu_has_x2apic)
return;
if (!x2apic_preenabled && disable_x2apic) {
printk(KERN_INFO
"Skipped enabling x2apic and Interrupt-remapping "
"because of nox2apic\n");
return;
}
if (x2apic_preenabled && disable_x2apic)
panic("Bios already enabled x2apic, can't enforce nox2apic");
if (!x2apic_preenabled && skip_ioapic_setup) {
printk(KERN_INFO
"Skipped enabling x2apic and Interrupt-remapping "
"because of skipping io-apic setup\n");
return;
}
ret = dmar_table_init();
if (ret) {
printk(KERN_INFO
"dmar_table_init() failed with %d:\n", ret);
if (x2apic_preenabled)
panic("x2apic enabled by bios. But IR enabling failed");
else
printk(KERN_INFO
"Not enabling x2apic,Intr-remapping\n");
return;
}
local_irq_save(flags);
mask_8259A();
save_mask_IO_APIC_setup();
ret = enable_intr_remapping(1);
if (ret && x2apic_preenabled) {
local_irq_restore(flags);
panic("x2apic enabled by bios. But IR enabling failed");
}
if (ret)
goto end;
if (!x2apic) {
x2apic = 1;
apic_ops = &x2apic_ops;
enable_x2apic();
}
end:
if (ret)
/*
* IR enabling failed
*/
restore_IO_APIC_setup();
else
reinit_intr_remapped_IO_APIC(x2apic_preenabled);
unmask_8259A();
local_irq_restore(flags);
if (!ret) {
if (!x2apic_preenabled)
printk(KERN_INFO
"Enabled x2apic and interrupt-remapping\n");
else
printk(KERN_INFO
"Enabled Interrupt-remapping\n");
} else
printk(KERN_ERR
"Failed to enable Interrupt-remapping and x2apic\n");
#else
if (!cpu_has_x2apic)
return;
if (x2apic_preenabled)
panic("x2apic enabled prior OS handover,"
" enable CONFIG_INTR_REMAP");
printk(KERN_INFO "Enable CONFIG_INTR_REMAP for enabling intr-remapping "
" and x2apic\n");
#endif
return;
}
/*
* Detect and enable local APICs on non-SMP boards.
* Original code written by Keir Fraser.
......@@ -872,7 +1190,7 @@ void __init early_init_lapic_mapping(void)
* Fetch the APIC ID of the BSP in case we have a
* default configuration (or the MP table is broken).
*/
boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
boot_cpu_physical_apicid = read_apic_id();
}
/**
......@@ -880,6 +1198,11 @@ void __init early_init_lapic_mapping(void)
*/
void __init init_apic_mappings(void)
{
if (x2apic) {
boot_cpu_physical_apicid = read_apic_id();
return;
}
/*
* If no local APIC can be found then set up a fake all
* zeroes page to simulate the local APIC and another
......@@ -899,13 +1222,15 @@ void __init init_apic_mappings(void)
* Fetch the APIC ID of the BSP in case we have a
* default configuration (or the MP table is broken).
*/
boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
boot_cpu_physical_apicid = read_apic_id();
}
/*
* This initializes the IO-APIC and APIC hardware if this is
* a UP kernel.
*/
int apic_version[MAX_APICS];
int __init APIC_init_uniprocessor(void)
{
if (disable_apic) {
......@@ -918,6 +1243,9 @@ int __init APIC_init_uniprocessor(void)
return -1;
}
enable_IR_x2apic();
setup_apic_routing();
verify_local_APIC();
connect_bsp_APIC();
......@@ -1004,17 +1332,57 @@ asmlinkage void smp_error_interrupt(void)
}
/**
* * connect_bsp_APIC - attach the APIC to the interrupt system
* */
* connect_bsp_APIC - attach the APIC to the interrupt system
*/
void __init connect_bsp_APIC(void)
{
#ifdef CONFIG_X86_32
if (pic_mode) {
/*
* Do not trust the local APIC being empty at bootup.
*/
clear_local_APIC();
/*
* PIC mode, enable APIC mode in the IMCR, i.e. connect BSP's
* local APIC to INT and NMI lines.
*/
apic_printk(APIC_VERBOSE, "leaving PIC mode, "
"enabling APIC mode.\n");
outb(0x70, 0x22);
outb(0x01, 0x23);
}
#endif
enable_apic_mode();
}
/**
* disconnect_bsp_APIC - detach the APIC from the interrupt system
* @virt_wire_setup: indicates, whether virtual wire mode is selected
*
* Virtual wire mode is necessary to deliver legacy interrupts even when the
* APIC is disabled.
*/
void disconnect_bsp_APIC(int virt_wire_setup)
{
unsigned int value;
#ifdef CONFIG_X86_32
if (pic_mode) {
/*
* Put the board back into PIC mode (has an effect only on
* certain older boards). Note that APIC interrupts, including
* IPIs, won't work beyond this point! The only exception are
* INIT IPIs.
*/
apic_printk(APIC_VERBOSE, "disabling APIC mode, "
"entering PIC mode.\n");
outb(0x70, 0x22);
outb(0x00, 0x23);
return;
}
#endif
/* Go back to Virtual Wire compatibility mode */
unsigned long value;
/* For the spurious interrupt use vector F, and enable it */
value = apic_read(APIC_SPIV);
......@@ -1040,7 +1408,10 @@ void disconnect_bsp_APIC(int virt_wire_setup)
apic_write(APIC_LVT0, APIC_LVT_MASKED);
}
/* For LVT1 make it edge triggered, active high, nmi and enabled */
/*
* For LVT1 make it edge triggered, active high,
* nmi and enabled
*/
value = apic_read(APIC_LVT1);
value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
......@@ -1055,9 +1426,20 @@ void __cpuinit generic_processor_info(int apicid, int version)
int cpu;
cpumask_t tmp_map;
/*
* Validate version
*/
if (version == 0x0) {
printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! "
"fixing up to 0x10. (tell your hw vendor)\n",
version);
version = 0x10;
}
apic_version[apicid] = version;
if (num_processors >= NR_CPUS) {
printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
" Processor ignored.\n", NR_CPUS);
" Processor ignored.\n", NR_CPUS);
return;
}
......@@ -1077,6 +1459,29 @@ void __cpuinit generic_processor_info(int apicid, int version)
if (apicid > max_physical_apicid)
max_physical_apicid = apicid;
#ifdef CONFIG_X86_32
/*
* Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y
* but we need to work other dependencies like SMP_SUSPEND etc
* before this can be done without some confusion.
* if (CPU_HOTPLUG_ENABLED || num_processors > 8)
* - Ashok Raj <ashok.raj@intel.com>
*/
if (max_physical_apicid >= 8) {
switch (boot_cpu_data.x86_vendor) {
case X86_VENDOR_INTEL:
if (!APIC_XAPIC(version)) {
def_to_bigsmp = 0;
break;
}
/* If P4 and above fall through */
case X86_VENDOR_AMD:
def_to_bigsmp = 1;
}
}
#endif
#if defined(CONFIG_X86_SMP) || defined(CONFIG_X86_64)
/* are we being called early in kernel startup? */
if (early_per_cpu_ptr(x86_cpu_to_apicid)) {
u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid);
......@@ -1088,20 +1493,28 @@ void __cpuinit generic_processor_info(int apicid, int version)
per_cpu(x86_cpu_to_apicid, cpu) = apicid;
per_cpu(x86_bios_cpu_apicid, cpu) = apicid;
}
#endif
cpu_set(cpu, cpu_possible_map);
cpu_set(cpu, cpu_present_map);
}
int hard_smp_processor_id(void)
{
return read_apic_id();
}
/*
* Power management
*/
#ifdef CONFIG_PM
static struct {
/* 'active' is true if the local APIC was enabled by us and
not the BIOS; this signifies that we are also responsible
for disabling it before entering apm/acpi suspend */
/*
* 'active' is true if the local APIC was enabled by us and
* not the BIOS; this signifies that we are also responsible
* for disabling it before entering apm/acpi suspend
*/
int active;
/* r/w apic fields */
unsigned int apic_id;
......@@ -1129,7 +1542,7 @@ static int lapic_suspend(struct sys_device *dev, pm_message_t state)
maxlvt = lapic_get_maxlvt();
apic_pm_state.apic_id = read_apic_id();
apic_pm_state.apic_id = apic_read(APIC_ID);
apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI);
apic_pm_state.apic_ldr = apic_read(APIC_LDR);
apic_pm_state.apic_dfr = apic_read(APIC_DFR);
......@@ -1142,10 +1555,11 @@ static int lapic_suspend(struct sys_device *dev, pm_message_t state)
apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR);
apic_pm_state.apic_tmict = apic_read(APIC_TMICT);
apic_pm_state.apic_tdcr = apic_read(APIC_TDCR);
#ifdef CONFIG_X86_MCE_INTEL
#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL)
if (maxlvt >= 5)
apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR);
#endif
local_irq_save(flags);
disable_local_APIC();
local_irq_restore(flags);
......@@ -1164,10 +1578,25 @@ static int lapic_resume(struct sys_device *dev)
maxlvt = lapic_get_maxlvt();
local_irq_save(flags);
rdmsr(MSR_IA32_APICBASE, l, h);
l &= ~MSR_IA32_APICBASE_BASE;
l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
wrmsr(MSR_IA32_APICBASE, l, h);
#ifdef CONFIG_X86_64
if (x2apic)
enable_x2apic();
else
#endif
{
/*
* Make sure the APICBASE points to the right address
*
* FIXME! This will be wrong if we ever support suspend on
* SMP! We'll need to do this as part of the CPU restore!
*/
rdmsr(MSR_IA32_APICBASE, l, h);
l &= ~MSR_IA32_APICBASE_BASE;
l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
wrmsr(MSR_IA32_APICBASE, l, h);
}
apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED);
apic_write(APIC_ID, apic_pm_state.apic_id);
apic_write(APIC_DFR, apic_pm_state.apic_dfr);
......@@ -1176,7 +1605,7 @@ static int lapic_resume(struct sys_device *dev)
apic_write(APIC_SPIV, apic_pm_state.apic_spiv);
apic_write(APIC_LVT0, apic_pm_state.apic_lvt0);
apic_write(APIC_LVT1, apic_pm_state.apic_lvt1);
#ifdef CONFIG_X86_MCE_INTEL
#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL)
if (maxlvt >= 5)
apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr);
#endif
......@@ -1190,10 +1619,17 @@ static int lapic_resume(struct sys_device *dev)
apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr);
apic_write(APIC_ESR, 0);
apic_read(APIC_ESR);
local_irq_restore(flags);
return 0;
}
/*
* This device has no shutdown method - fully functioning local APICs
* are needed on every CPU up until machine_halt/restart/poweroff.
*/
static struct sysdev_class lapic_sysclass = {
.name = "lapic",
.resume = lapic_resume,
......@@ -1307,31 +1743,19 @@ __cpuinit int apic_is_clustered_box(void)
return (clusters > 2);
}
/*
* APIC command line parameters
*/
static int __init apic_set_verbosity(char *str)
static __init int setup_nox2apic(char *str)
{
if (str == NULL) {
skip_ioapic_setup = 0;
ioapic_force = 1;
return 0;
}
if (strcmp("debug", str) == 0)
apic_verbosity = APIC_DEBUG;
else if (strcmp("verbose", str) == 0)
apic_verbosity = APIC_VERBOSE;
else {
printk(KERN_WARNING "APIC Verbosity level %s not recognised"
" use apic=verbose or apic=debug\n", str);
return -EINVAL;
}
disable_x2apic = 1;
clear_cpu_cap(&boot_cpu_data, X86_FEATURE_X2APIC);
return 0;
}
early_param("apic", apic_set_verbosity);
early_param("nox2apic", setup_nox2apic);
static __init int setup_disableapic(char *str)
/*
* APIC command line parameters
*/
static int __init setup_disableapic(char *arg)
{
disable_apic = 1;
setup_clear_cpu_cap(X86_FEATURE_APIC);
......@@ -1340,9 +1764,9 @@ static __init int setup_disableapic(char *str)
early_param("disableapic", setup_disableapic);
/* same as disableapic, for compatibility */
static __init int setup_nolapic(char *str)
static int __init setup_nolapic(char *arg)
{
return setup_disableapic(str);
return setup_disableapic(arg);
}
early_param("nolapic", setup_nolapic);
......@@ -1353,14 +1777,19 @@ static int __init parse_lapic_timer_c2_ok(char *arg)
}
early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok);
static __init int setup_noapictimer(char *str)
static int __init parse_disable_apic_timer(char *arg)
{
if (str[0] != ' ' && str[0] != 0)
return 0;
disable_apic_timer = 1;
return 1;
return 0;
}
__setup("noapictimer", setup_noapictimer);
early_param("noapictimer", parse_disable_apic_timer);
static int __init parse_nolapic_timer(char *arg)
{
disable_apic_timer = 1;
return 0;
}
early_param("nolapic_timer", parse_nolapic_timer);
static __init int setup_apicpmtimer(char *s)
{
......@@ -1370,6 +1799,31 @@ static __init int setup_apicpmtimer(char *s)
}
__setup("apicpmtimer", setup_apicpmtimer);
static int __init apic_set_verbosity(char *arg)
{
if (!arg) {
#ifdef CONFIG_X86_64
skip_ioapic_setup = 0;
ioapic_force = 1;
return 0;
#endif
return -EINVAL;
}
if (strcmp("debug", arg) == 0)
apic_verbosity = APIC_DEBUG;
else if (strcmp("verbose", arg) == 0)
apic_verbosity = APIC_VERBOSE;
else {
printk(KERN_WARNING "APIC Verbosity level %s not recognised"
" use apic=verbose or apic=debug\n", arg);
return -EINVAL;
}
return 0;
}
early_param("apic", apic_set_verbosity);
static int __init lapic_insert_resource(void)
{
if (!apic_phys)
......
arch/x86/kernel/cpu/common_64.c
View file @ d8470596
......@@ -687,6 +687,8 @@ void __cpuinit cpu_init(void)
barrier();
check_efer();
if (cpu != 0 && x2apic)
enable_x2apic();
/*
* set up and load the per-CPU TSS
......
arch/x86/kernel/cpu/feature_names.c
View file @ d8470596
......@@ -46,7 +46,7 @@ const char * const x86_cap_flags[NCAPINTS*32] = {
/* Intel-defined (#2) */
"pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est",
"tm2", "ssse3", "cid", NULL, NULL, "cx16", "xtpr", NULL,
NULL, NULL, "dca", "sse4_1", "sse4_2", NULL, NULL, "popcnt",
NULL, NULL, "dca", "sse4_1", "sse4_2", "x2apic", NULL, "popcnt",
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* VIA/Cyrix/Centaur-defined */
......
arch/x86/kernel/genapic_64.c
View file @ d8470596
......@@ -16,87 +16,63 @@
#include <linux/ctype.h>
#include <linux/init.h>
#include <linux/hardirq.h>
#include <linux/dmar.h>
#include <asm/smp.h>
#include <asm/ipi.h>
#include <asm/genapic.h>
#ifdef CONFIG_ACPI
#include <acpi/acpi_bus.h>
#endif
DEFINE_PER_CPU(int, x2apic_extra_bits);
extern struct genapic apic_flat;
extern struct genapic apic_physflat;
extern struct genapic apic_x2xpic_uv_x;
extern struct genapic apic_x2apic_phys;
extern struct genapic apic_x2apic_cluster;
struct genapic __read_mostly *genapic = &apic_flat;
static enum uv_system_type uv_system_type;
static struct genapic *apic_probe[] __initdata = {
&apic_x2apic_uv_x,
&apic_x2apic_phys,
&apic_x2apic_cluster,
&apic_physflat,
NULL,
};
/*
* Check the APIC IDs in bios_cpu_apicid and choose the APIC mode.
*/
void __init setup_apic_routing(void)
{
if (uv_system_type == UV_NON_UNIQUE_APIC)
genapic = &apic_x2apic_uv_x;
else
#ifdef CONFIG_ACPI
/*
* Quirk: some x86_64 machines can only use physical APIC mode
* regardless of how many processors are present (x86_64 ES7000
* is an example).
*/
if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID &&
(acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL))
genapic = &apic_physflat;
else
#endif
if (max_physical_apicid < 8)
genapic = &apic_flat;
else
genapic = &apic_physflat;
if (genapic == &apic_x2apic_phys || genapic == &apic_x2apic_cluster) {
if (!intr_remapping_enabled)
genapic = &apic_flat;
}
printk(KERN_INFO "Setting APIC routing to %s\n", genapic->name);
if (genapic == &apic_flat) {
if (max_physical_apicid >= 8)
genapic = &apic_physflat;
printk(KERN_INFO "Setting APIC routing to %s\n", genapic->name);
}
}
/* Same for both flat and physical. */
void send_IPI_self(int vector)
void apic_send_IPI_self(int vector)
{
__send_IPI_shortcut(APIC_DEST_SELF, vector, APIC_DEST_PHYSICAL);
}
int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
if (!strcmp(oem_id, "SGI")) {
if (!strcmp(oem_table_id, "UVL"))
uv_system_type = UV_LEGACY_APIC;
else if (!strcmp(oem_table_id, "UVX"))
uv_system_type = UV_X2APIC;
else if (!strcmp(oem_table_id, "UVH"))
uv_system_type = UV_NON_UNIQUE_APIC;
int i;
for (i = 0; apic_probe[i]; ++i) {
if (apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id)) {
genapic = apic_probe[i];
printk(KERN_INFO "Setting APIC routing to %s.\n",
genapic->name);
return 1;
}
}
return 0;
}
unsigned int read_apic_id(void)
{
unsigned int id;
WARN_ON(preemptible() && num_online_cpus() > 1);
id = apic_read(APIC_ID);
if (uv_system_type >= UV_X2APIC)
id |= __get_cpu_var(x2apic_extra_bits);
return id;
}
enum uv_system_type get_uv_system_type(void)
{
return uv_system_type;
}
int is_uv_system(void)
{
return uv_system_type != UV_NONE;
}
EXPORT_SYMBOL_GPL(is_uv_system);
arch/x86/kernel/genapic_flat_64.c
View file @ d8470596
......@@ -15,9 +15,20 @@
#include <linux/kernel.h>
#include <linux/ctype.h>
#include <linux/init.h>
#include <linux/hardirq.h>
#include <asm/smp.h>
#include <asm/ipi.h>
#include <asm/genapic.h>
#include <mach_apicdef.h>
#ifdef CONFIG_ACPI
#include <acpi/acpi_bus.h>
#endif
static int __init flat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
return 1;
}
static cpumask_t flat_target_cpus(void)
{
......@@ -95,9 +106,33 @@ static void flat_send_IPI_all(int vector)
__send_IPI_shortcut(APIC_DEST_ALLINC, vector, APIC_DEST_LOGICAL);
}
static unsigned int get_apic_id(unsigned long x)
{
unsigned int id;
id = (((x)>>24) & 0xFFu);
return id;
}
static unsigned long set_apic_id(unsigned int id)
{
unsigned long x;
x = ((id & 0xFFu)<<24);
return x;
}
static unsigned int read_xapic_id(void)
{
unsigned int id;
id = get_apic_id(apic_read(APIC_ID));
return id;
}
static int flat_apic_id_registered(void)
{
return physid_isset(GET_APIC_ID(read_apic_id()), phys_cpu_present_map);
return physid_isset(read_xapic_id(), phys_cpu_present_map);
}
static unsigned int flat_cpu_mask_to_apicid(cpumask_t cpumask)
......@@ -112,6 +147,7 @@ static unsigned int phys_pkg_id(int index_msb)
struct genapic apic_flat = {
.name = "flat",
.acpi_madt_oem_check = flat_acpi_madt_oem_check,
.int_delivery_mode = dest_LowestPrio,
.int_dest_mode = (APIC_DEST_LOGICAL != 0),
.target_cpus = flat_target_cpus,
......@@ -121,8 +157,12 @@ struct genapic apic_flat = {
.send_IPI_all = flat_send_IPI_all,
.send_IPI_allbutself = flat_send_IPI_allbutself,
.send_IPI_mask = flat_send_IPI_mask,
.send_IPI_self = apic_send_IPI_self,
.cpu_mask_to_apicid = flat_cpu_mask_to_apicid,
.phys_pkg_id = phys_pkg_id,
.get_apic_id = get_apic_id,
.set_apic_id = set_apic_id,
.apic_id_mask = (0xFFu<<24),
};
/*
......@@ -130,6 +170,21 @@ struct genapic apic_flat = {
* We cannot use logical delivery in this case because the mask
* overflows, so use physical mode.
*/
static int __init physflat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
#ifdef CONFIG_ACPI
/*
* Quirk: some x86_64 machines can only use physical APIC mode
* regardless of how many processors are present (x86_64 ES7000
* is an example).
*/
if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID &&
(acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL))
return 1;
#endif
return 0;
}
static cpumask_t physflat_target_cpus(void)
{
......@@ -176,6 +231,7 @@ static unsigned int physflat_cpu_mask_to_apicid(cpumask_t cpumask)
struct genapic apic_physflat = {
.name = "physical flat",
.acpi_madt_oem_check = physflat_acpi_madt_oem_check,
.int_delivery_mode = dest_Fixed,
.int_dest_mode = (APIC_DEST_PHYSICAL != 0),
.target_cpus = physflat_target_cpus,
......@@ -185,6 +241,10 @@ struct genapic apic_physflat = {
.send_IPI_all = physflat_send_IPI_all,
.send_IPI_allbutself = physflat_send_IPI_allbutself,
.send_IPI_mask = physflat_send_IPI_mask,
.send_IPI_self = apic_send_IPI_self,
.cpu_mask_to_apicid = physflat_cpu_mask_to_apicid,
.phys_pkg_id = phys_pkg_id,
.get_apic_id = get_apic_id,
.set_apic_id = set_apic_id,
.apic_id_mask = (0xFFu<<24),
};
arch/x86/kernel/genx2apic_cluster.c 0 → 100644
View file @ d8470596
#include <linux/threads.h>
#include <linux/cpumask.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/ctype.h>
#include <linux/init.h>
#include <linux/dmar.h>
#include <asm/smp.h>
#include <asm/ipi.h>
#include <asm/genapic.h>
DEFINE_PER_CPU(u32, x86_cpu_to_logical_apicid);
static int __init x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
if (cpu_has_x2apic)
return 1;
return 0;
}
/* Start with all IRQs pointing to boot CPU. IRQ balancing will shift them. */
static cpumask_t x2apic_target_cpus(void)
{
return cpumask_of_cpu(0);
}
/*
* for now each logical cpu is in its own vector allocation domain.
*/
static cpumask_t x2apic_vector_allocation_domain(int cpu)
{
cpumask_t domain = CPU_MASK_NONE;
cpu_set(cpu, domain);
return domain;
}
static void __x2apic_send_IPI_dest(unsigned int apicid, int vector,
unsigned int dest)
{
unsigned long cfg;
cfg = __prepare_ICR(0, vector, dest);
/*
* send the IPI.
*/
x2apic_icr_write(cfg, apicid);
}
/*
* for now, we send the IPI's one by one in the cpumask.
* TBD: Based on the cpu mask, we can send the IPI's to the cluster group
* at once. We have 16 cpu's in a cluster. This will minimize IPI register
* writes.
*/
static void x2apic_send_IPI_mask(cpumask_t mask, int vector)
{
unsigned long flags;
unsigned long query_cpu;
local_irq_save(flags);
for_each_cpu_mask(query_cpu, mask) {
__x2apic_send_IPI_dest(per_cpu(x86_cpu_to_logical_apicid, query_cpu),
vector, APIC_DEST_LOGICAL);
}
local_irq_restore(flags);
}
static void x2apic_send_IPI_allbutself(int vector)
{
cpumask_t mask = cpu_online_map;
cpu_clear(smp_processor_id(), mask);
if (!cpus_empty(mask))
x2apic_send_IPI_mask(mask, vector);
}
static void x2apic_send_IPI_all(int vector)
{
x2apic_send_IPI_mask(cpu_online_map, vector);
}
static int x2apic_apic_id_registered(void)
{
return 1;
}
static unsigned int x2apic_cpu_mask_to_apicid(cpumask_t cpumask)
{
int cpu;
/*
* We're using fixed IRQ delivery, can only return one phys APIC ID.
* May as well be the first.
*/
cpu = first_cpu(cpumask);
if ((unsigned)cpu < NR_CPUS)
return per_cpu(x86_cpu_to_logical_apicid, cpu);
else
return BAD_APICID;
}
static unsigned int get_apic_id(unsigned long x)
{
unsigned int id;
id = x;
return id;
}
static unsigned long set_apic_id(unsigned int id)
{
unsigned long x;
x = id;
return x;
}
static unsigned int x2apic_read_id(void)
{
return apic_read(APIC_ID);
}
static unsigned int phys_pkg_id(int index_msb)
{
return x2apic_read_id() >> index_msb;
}
static void x2apic_send_IPI_self(int vector)
{
apic_write(APIC_SELF_IPI, vector);
}
static void init_x2apic_ldr(void)
{
int cpu = smp_processor_id();
per_cpu(x86_cpu_to_logical_apicid, cpu) = apic_read(APIC_LDR);
return;
}
struct genapic apic_x2apic_cluster = {
.name = "cluster x2apic",
.acpi_madt_oem_check = x2apic_acpi_madt_oem_check,
.int_delivery_mode = dest_LowestPrio,
.int_dest_mode = (APIC_DEST_LOGICAL != 0),
.target_cpus = x2apic_target_cpus,
.vector_allocation_domain = x2apic_vector_allocation_domain,
.apic_id_registered = x2apic_apic_id_registered,
.init_apic_ldr = init_x2apic_ldr,
.send_IPI_all = x2apic_send_IPI_all,
.send_IPI_allbutself = x2apic_send_IPI_allbutself,
.send_IPI_mask = x2apic_send_IPI_mask,
.send_IPI_self = x2apic_send_IPI_self,
.cpu_mask_to_apicid = x2apic_cpu_mask_to_apicid,
.phys_pkg_id = phys_pkg_id,
.get_apic_id = get_apic_id,
.set_apic_id = set_apic_id,
.apic_id_mask = (0xFFFFFFFFu),
};
arch/x86/kernel/genx2apic_phys.c 0 → 100644
View file @ d8470596
#include <linux/threads.h>
#include <linux/cpumask.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/ctype.h>
#include <linux/init.h>
#include <linux/dmar.h>
#include <asm/smp.h>
#include <asm/ipi.h>
#include <asm/genapic.h>
static int x2apic_phys;
static int set_x2apic_phys_mode(char *arg)
{
x2apic_phys = 1;
return 0;
}
early_param("x2apic_phys", set_x2apic_phys_mode);
static int __init x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
if (cpu_has_x2apic && x2apic_phys)
return 1;
return 0;
}
/* Start with all IRQs pointing to boot CPU. IRQ balancing will shift them. */
static cpumask_t x2apic_target_cpus(void)
{
return cpumask_of_cpu(0);
}
static cpumask_t x2apic_vector_allocation_domain(int cpu)
{
cpumask_t domain = CPU_MASK_NONE;
cpu_set(cpu, domain);
return domain;
}
static void __x2apic_send_IPI_dest(unsigned int apicid, int vector,
unsigned int dest)
{
unsigned long cfg;
cfg = __prepare_ICR(0, vector, dest);
/*
* send the IPI.
*/
x2apic_icr_write(cfg, apicid);
}
static void x2apic_send_IPI_mask(cpumask_t mask, int vector)
{
unsigned long flags;
unsigned long query_cpu;
local_irq_save(flags);
for_each_cpu_mask(query_cpu, mask) {
__x2apic_send_IPI_dest(per_cpu(x86_cpu_to_apicid, query_cpu),
vector, APIC_DEST_PHYSICAL);
}
local_irq_restore(flags);
}
static void x2apic_send_IPI_allbutself(int vector)
{
cpumask_t mask = cpu_online_map;
cpu_clear(smp_processor_id(), mask);
if (!cpus_empty(mask))
x2apic_send_IPI_mask(mask, vector);
}
static void x2apic_send_IPI_all(int vector)
{
x2apic_send_IPI_mask(cpu_online_map, vector);
}
static int x2apic_apic_id_registered(void)
{
return 1;
}
static unsigned int x2apic_cpu_mask_to_apicid(cpumask_t cpumask)
{
int cpu;
/*
* We're using fixed IRQ delivery, can only return one phys APIC ID.
* May as well be the first.
*/
cpu = first_cpu(cpumask);
if ((unsigned)cpu < NR_CPUS)
return per_cpu(x86_cpu_to_apicid, cpu);
else
return BAD_APICID;
}
static unsigned int get_apic_id(unsigned long x)
{
unsigned int id;
id = x;
return id;
}
static unsigned long set_apic_id(unsigned int id)
{
unsigned long x;
x = id;
return x;
}
static unsigned int x2apic_read_id(void)
{
return apic_read(APIC_ID);
}
static unsigned int phys_pkg_id(int index_msb)
{
return x2apic_read_id() >> index_msb;
}
void x2apic_send_IPI_self(int vector)
{
apic_write(APIC_SELF_IPI, vector);
}
void init_x2apic_ldr(void)
{
return;
}
struct genapic apic_x2apic_phys = {
.name = "physical x2apic",
.acpi_madt_oem_check = x2apic_acpi_madt_oem_check,
.int_delivery_mode = dest_Fixed,
.int_dest_mode = (APIC_DEST_PHYSICAL != 0),
.target_cpus = x2apic_target_cpus,
.vector_allocation_domain = x2apic_vector_allocation_domain,
.apic_id_registered = x2apic_apic_id_registered,
.init_apic_ldr = init_x2apic_ldr,
.send_IPI_all = x2apic_send_IPI_all,
.send_IPI_allbutself = x2apic_send_IPI_allbutself,
.send_IPI_mask = x2apic_send_IPI_mask,
.send_IPI_self = x2apic_send_IPI_self,
.cpu_mask_to_apicid = x2apic_cpu_mask_to_apicid,
.phys_pkg_id = phys_pkg_id,
.get_apic_id = get_apic_id,
.set_apic_id = set_apic_id,
.apic_id_mask = (0xFFFFFFFFu),
};
arch/x86/kernel/genx2apic_uv_x.c
View file @ d8470596
......@@ -12,12 +12,12 @@
#include <linux/threads.h>
#include <linux/cpumask.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/ctype.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/bootmem.h>
#include <linux/module.h>
#include <linux/hardirq.h>
#include <asm/smp.h>
#include <asm/ipi.h>
#include <asm/genapic.h>
......@@ -26,6 +26,36 @@
#include <asm/uv/uv_hub.h>
#include <asm/uv/bios.h>
DEFINE_PER_CPU(int, x2apic_extra_bits);
static enum uv_system_type uv_system_type;
static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
if (!strcmp(oem_id, "SGI")) {
if (!strcmp(oem_table_id, "UVL"))
uv_system_type = UV_LEGACY_APIC;
else if (!strcmp(oem_table_id, "UVX"))
uv_system_type = UV_X2APIC;
else if (!strcmp(oem_table_id, "UVH")) {
uv_system_type = UV_NON_UNIQUE_APIC;
return 1;
}
}
return 0;
}
enum uv_system_type get_uv_system_type(void)
{
return uv_system_type;
}
int is_uv_system(void)
{
return uv_system_type != UV_NONE;
}
EXPORT_SYMBOL_GPL(is_uv_system);
DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info);
......@@ -123,6 +153,10 @@ static int uv_apic_id_registered(void)
return 1;
}
static void uv_init_apic_ldr(void)
{
}
static unsigned int uv_cpu_mask_to_apicid(cpumask_t cpumask)
{
int cpu;
......@@ -138,9 +172,34 @@ static unsigned int uv_cpu_mask_to_apicid(cpumask_t cpumask)
return BAD_APICID;
}
static unsigned int get_apic_id(unsigned long x)
{
unsigned int id;
WARN_ON(preemptible() && num_online_cpus() > 1);
id = x | __get_cpu_var(x2apic_extra_bits);
return id;
}
static unsigned long set_apic_id(unsigned int id)
{
unsigned long x;
/* maskout x2apic_extra_bits ? */
x = id;
return x;
}
static unsigned int uv_read_apic_id(void)
{
return get_apic_id(apic_read(APIC_ID));
}
static unsigned int phys_pkg_id(int index_msb)
{
return GET_APIC_ID(read_apic_id()) >> index_msb;
return uv_read_apic_id() >> index_msb;
}
#ifdef ZZZ /* Needs x2apic patch */
......@@ -152,17 +211,22 @@ static void uv_send_IPI_self(int vector)
struct genapic apic_x2apic_uv_x = {
.name = "UV large system",
.acpi_madt_oem_check = uv_acpi_madt_oem_check,
.int_delivery_mode = dest_Fixed,
.int_dest_mode = (APIC_DEST_PHYSICAL != 0),
.target_cpus = uv_target_cpus,
.vector_allocation_domain = uv_vector_allocation_domain,/* Fixme ZZZ */
.apic_id_registered = uv_apic_id_registered,
.init_apic_ldr = uv_init_apic_ldr,
.send_IPI_all = uv_send_IPI_all,
.send_IPI_allbutself = uv_send_IPI_allbutself,
.send_IPI_mask = uv_send_IPI_mask,
/* ZZZ.send_IPI_self = uv_send_IPI_self, */
.cpu_mask_to_apicid = uv_cpu_mask_to_apicid,
.phys_pkg_id = phys_pkg_id, /* Fixme ZZZ */
.get_apic_id = get_apic_id,
.set_apic_id = set_apic_id,
.apic_id_mask = (0xFFFFFFFFu),
};
static __cpuinit void set_x2apic_extra_bits(int pnode)
......@@ -401,3 +465,5 @@ void __cpuinit uv_cpu_init(void)
if (get_uv_system_type() == UV_NON_UNIQUE_APIC)
set_x2apic_extra_bits(uv_hub_info->pnode);
}
arch/x86/kernel/i8259.c
View file @ d8470596
......@@ -282,6 +282,30 @@ static int __init i8259A_init_sysfs(void)
device_initcall(i8259A_init_sysfs);
void mask_8259A(void)
{
unsigned long flags;
spin_lock_irqsave(&i8259A_lock, flags);
outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */
outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */
spin_unlock_irqrestore(&i8259A_lock, flags);
}
void unmask_8259A(void)
{
unsigned long flags;
spin_lock_irqsave(&i8259A_lock, flags);
outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */
outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */
spin_unlock_irqrestore(&i8259A_lock, flags);
}
void init_8259A(int auto_eoi)
{
unsigned long flags;
......
arch/x86/kernel/io_apic_32.c
View file @ d8470596
......@@ -46,10 +46,13 @@
#include <asm/nmi.h>
#include <asm/msidef.h>
#include <asm/hypertransport.h>
#include <asm/setup.h>
#include <mach_apic.h>
#include <mach_apicdef.h>
#define __apicdebuginit(type) static type __init
int (*ioapic_renumber_irq)(int ioapic, int irq);
atomic_t irq_mis_count;
......@@ -1341,7 +1344,8 @@ static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin,
ioapic_write_entry(apic, pin, entry);
}
void __init print_IO_APIC(void)
__apicdebuginit(void) print_IO_APIC(void)
{
int apic, i;
union IO_APIC_reg_00 reg_00;
......@@ -1456,9 +1460,7 @@ void __init print_IO_APIC(void)
return;
}
#if 0
static void print_APIC_bitfield(int base)
__apicdebuginit(void) print_APIC_bitfield(int base)
{
unsigned int v;
int i, j;
......@@ -1479,9 +1481,10 @@ static void print_APIC_bitfield(int base)
}
}
void /*__init*/ print_local_APIC(void *dummy)
__apicdebuginit(void) print_local_APIC(void *dummy)
{
unsigned int v, ver, maxlvt;
u64 icr;
if (apic_verbosity == APIC_QUIET)
return;
......@@ -1490,7 +1493,7 @@ void /*__init*/ print_local_APIC(void *dummy)
smp_processor_id(), hard_smp_processor_id());
v = apic_read(APIC_ID);
printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v,
GET_APIC_ID(read_apic_id()));
GET_APIC_ID(v));
v = apic_read(APIC_LVR);
printk(KERN_INFO "... APIC VERSION: %08x\n", v);
ver = GET_APIC_VERSION(v);
......@@ -1532,10 +1535,9 @@ void /*__init*/ print_local_APIC(void *dummy)
printk(KERN_DEBUG "... APIC ESR: %08x\n", v);
}
v = apic_read(APIC_ICR);
printk(KERN_DEBUG "... APIC ICR: %08x\n", v);
v = apic_read(APIC_ICR2);
printk(KERN_DEBUG "... APIC ICR2: %08x\n", v);
icr = apic_icr_read();
printk(KERN_DEBUG "... APIC ICR: %08x\n", icr);
printk(KERN_DEBUG "... APIC ICR2: %08x\n", icr >> 32);
v = apic_read(APIC_LVTT);
printk(KERN_DEBUG "... APIC LVTT: %08x\n", v);
......@@ -1563,12 +1565,12 @@ void /*__init*/ print_local_APIC(void *dummy)
printk("\n");
}
void print_all_local_APICs(void)
__apicdebuginit(void) print_all_local_APICs(void)
{
on_each_cpu(print_local_APIC, NULL, 1);
}
void /*__init*/ print_PIC(void)
__apicdebuginit(void) print_PIC(void)
{
unsigned int v;
unsigned long flags;
......@@ -1600,7 +1602,17 @@ void /*__init*/ print_PIC(void)
printk(KERN_DEBUG "... PIC ELCR: %04x\n", v);
}
#endif /* 0 */
__apicdebuginit(int) print_all_ICs(void)
{
print_PIC();
print_all_local_APICs();
print_IO_APIC();
return 0;
}
fs_initcall(print_all_ICs);
static void __init enable_IO_APIC(void)
{
......@@ -1698,8 +1710,7 @@ void disable_IO_APIC(void)
entry.dest_mode = 0; /* Physical */
entry.delivery_mode = dest_ExtINT; /* ExtInt */
entry.vector = 0;
entry.dest.physical.physical_dest =
GET_APIC_ID(read_apic_id());
entry.dest.physical.physical_dest = read_apic_id();
/*
* Add it to the IO-APIC irq-routing table:
......@@ -1725,10 +1736,8 @@ static void __init setup_ioapic_ids_from_mpc(void)
unsigned char old_id;
unsigned long flags;
#ifdef CONFIG_X86_NUMAQ
if (found_numaq)
if (x86_quirks->setup_ioapic_ids && x86_quirks->setup_ioapic_ids())
return;
#endif
/*
* Don't check I/O APIC IDs for xAPIC systems. They have
......@@ -2329,8 +2338,6 @@ void __init setup_IO_APIC(void)
setup_IO_APIC_irqs();
init_IO_APIC_traps();
check_timer();
if (!acpi_ioapic)
print_IO_APIC();
}
/*
......
arch/x86/kernel/io_apic_64.c
View file @ d8470596
......@@ -37,6 +37,7 @@
#include <acpi/acpi_bus.h>
#endif
#include <linux/bootmem.h>
#include <linux/dmar.h>
#include <asm/idle.h>
#include <asm/io.h>
......@@ -49,10 +50,13 @@
#include <asm/nmi.h>
#include <asm/msidef.h>
#include <asm/hypertransport.h>
#include <asm/irq_remapping.h>
#include <mach_ipi.h>
#include <mach_apic.h>
#define __apicdebuginit(type) static type __init
struct irq_cfg {
cpumask_t domain;
cpumask_t old_domain;
......@@ -87,8 +91,6 @@ int first_system_vector = 0xfe;
char system_vectors[NR_VECTORS] = { [0 ... NR_VECTORS-1] = SYS_VECTOR_FREE};
#define __apicdebuginit __init
int sis_apic_bug; /* not actually supported, dummy for compile */
static int no_timer_check;
......@@ -108,6 +110,9 @@ static DEFINE_SPINLOCK(vector_lock);
*/
int nr_ioapic_registers[MAX_IO_APICS];
/* I/O APIC RTE contents at the OS boot up */
struct IO_APIC_route_entry *early_ioapic_entries[MAX_IO_APICS];
/* I/O APIC entries */
struct mp_config_ioapic mp_ioapics[MAX_IO_APICS];
int nr_ioapics;
......@@ -303,7 +308,12 @@ static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, u8 vector)
pin = entry->pin;
if (pin == -1)
break;
io_apic_write(apic, 0x11 + pin*2, dest);
/*
* With interrupt-remapping, destination information comes
* from interrupt-remapping table entry.
*/
if (!irq_remapped(irq))
io_apic_write(apic, 0x11 + pin*2, dest);
reg = io_apic_read(apic, 0x10 + pin*2);
reg &= ~IO_APIC_REDIR_VECTOR_MASK;
reg |= vector;
......@@ -440,6 +450,69 @@ static void clear_IO_APIC (void)
clear_IO_APIC_pin(apic, pin);
}
/*
* Saves and masks all the unmasked IO-APIC RTE's
*/
int save_mask_IO_APIC_setup(void)
{
union IO_APIC_reg_01 reg_01;
unsigned long flags;
int apic, pin;
/*
* The number of IO-APIC IRQ registers (== #pins):
*/
for (apic = 0; apic < nr_ioapics; apic++) {
spin_lock_irqsave(&ioapic_lock, flags);
reg_01.raw = io_apic_read(apic, 1);
spin_unlock_irqrestore(&ioapic_lock, flags);
nr_ioapic_registers[apic] = reg_01.bits.entries+1;
}
for (apic = 0; apic < nr_ioapics; apic++) {
early_ioapic_entries[apic] =
kzalloc(sizeof(struct IO_APIC_route_entry) *
nr_ioapic_registers[apic], GFP_KERNEL);
if (!early_ioapic_entries[apic])
return -ENOMEM;
}
for (apic = 0; apic < nr_ioapics; apic++)
for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
struct IO_APIC_route_entry entry;
entry = early_ioapic_entries[apic][pin] =
ioapic_read_entry(apic, pin);
if (!entry.mask) {
entry.mask = 1;
ioapic_write_entry(apic, pin, entry);
}
}
return 0;
}
void restore_IO_APIC_setup(void)
{
int apic, pin;
for (apic = 0; apic < nr_ioapics; apic++)
for (pin = 0; pin < nr_ioapic_registers[apic]; pin++)
ioapic_write_entry(apic, pin,
early_ioapic_entries[apic][pin]);
}
void reinit_intr_remapped_IO_APIC(int intr_remapping)
{
/*
* for now plain restore of previous settings.
* TBD: In the case of OS enabling interrupt-remapping,
* IO-APIC RTE's need to be setup to point to interrupt-remapping
* table entries. for now, do a plain restore, and wait for
* the setup_IO_APIC_irqs() to do proper initialization.
*/
restore_IO_APIC_setup();
}
int skip_ioapic_setup;
int ioapic_force;
......@@ -839,18 +912,98 @@ void __setup_vector_irq(int cpu)
}
static struct irq_chip ioapic_chip;
#ifdef CONFIG_INTR_REMAP
static struct irq_chip ir_ioapic_chip;
#endif
static void ioapic_register_intr(int irq, unsigned long trigger)
{
if (trigger) {
if (trigger)
irq_desc[irq].status |= IRQ_LEVEL;
set_irq_chip_and_handler_name(irq, &ioapic_chip,
handle_fasteoi_irq, "fasteoi");
} else {
else
irq_desc[irq].status &= ~IRQ_LEVEL;
#ifdef CONFIG_INTR_REMAP
if (irq_remapped(irq)) {
irq_desc[irq].status |= IRQ_MOVE_PCNTXT;
if (trigger)
set_irq_chip_and_handler_name(irq, &ir_ioapic_chip,
handle_fasteoi_irq,
"fasteoi");
else
set_irq_chip_and_handler_name(irq, &ir_ioapic_chip,
handle_edge_irq, "edge");
return;
}
#endif
if (trigger)
set_irq_chip_and_handler_name(irq, &ioapic_chip,
handle_fasteoi_irq,
"fasteoi");
else
set_irq_chip_and_handler_name(irq, &ioapic_chip,
handle_edge_irq, "edge");
}
static int setup_ioapic_entry(int apic, int irq,
struct IO_APIC_route_entry *entry,
unsigned int destination, int trigger,
int polarity, int vector)
{
/*
* add it to the IO-APIC irq-routing table:
*/
memset(entry,0,sizeof(*entry));
#ifdef CONFIG_INTR_REMAP
if (intr_remapping_enabled) {
struct intel_iommu *iommu = map_ioapic_to_ir(apic);
struct irte irte;
struct IR_IO_APIC_route_entry *ir_entry =
(struct IR_IO_APIC_route_entry *) entry;
int index;
if (!iommu)
panic("No mapping iommu for ioapic %d\n", apic);
index = alloc_irte(iommu, irq, 1);
if (index < 0)
panic("Failed to allocate IRTE for ioapic %d\n", apic);
memset(&irte, 0, sizeof(irte));
irte.present = 1;
irte.dst_mode = INT_DEST_MODE;
irte.trigger_mode = trigger;
irte.dlvry_mode = INT_DELIVERY_MODE;
irte.vector = vector;
irte.dest_id = IRTE_DEST(destination);
modify_irte(irq, &irte);
ir_entry->index2 = (index >> 15) & 0x1;
ir_entry->zero = 0;
ir_entry->format = 1;
ir_entry->index = (index & 0x7fff);
} else
#endif
{
entry->delivery_mode = INT_DELIVERY_MODE;
entry->dest_mode = INT_DEST_MODE;
entry->dest = destination;
}
entry->mask = 0; /* enable IRQ */
entry->trigger = trigger;
entry->polarity = polarity;
entry->vector = vector;
/* Mask level triggered irqs.
* Use IRQ_DELAYED_DISABLE for edge triggered irqs.
*/
if (trigger)
entry->mask = 1;
return 0;
}
static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq,
......@@ -875,24 +1028,15 @@ static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq,
apic, mp_ioapics[apic].mp_apicid, pin, cfg->vector,
irq, trigger, polarity);
/*
* add it to the IO-APIC irq-routing table:
*/
memset(&entry,0,sizeof(entry));
entry.delivery_mode = INT_DELIVERY_MODE;
entry.dest_mode = INT_DEST_MODE;
entry.dest = cpu_mask_to_apicid(mask);
entry.mask = 0; /* enable IRQ */
entry.trigger = trigger;
entry.polarity = polarity;
entry.vector = cfg->vector;
/* Mask level triggered irqs.
* Use IRQ_DELAYED_DISABLE for edge triggered irqs.
*/
if (trigger)
entry.mask = 1;
if (setup_ioapic_entry(mp_ioapics[apic].mp_apicid, irq, &entry,
cpu_mask_to_apicid(mask), trigger, polarity,
cfg->vector)) {
printk("Failed to setup ioapic entry for ioapic %d, pin %d\n",
mp_ioapics[apic].mp_apicid, pin);
__clear_irq_vector(irq);
return;
}
ioapic_register_intr(irq, trigger);
if (irq < 16)
......@@ -944,6 +1088,9 @@ static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin,
{
struct IO_APIC_route_entry entry;
if (intr_remapping_enabled)
return;
memset(&entry, 0, sizeof(entry));
/*
......@@ -970,7 +1117,8 @@ static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin,
ioapic_write_entry(apic, pin, entry);
}
void __apicdebuginit print_IO_APIC(void)
__apicdebuginit(void) print_IO_APIC(void)
{
int apic, i;
union IO_APIC_reg_00 reg_00;
......@@ -1064,9 +1212,7 @@ void __apicdebuginit print_IO_APIC(void)
return;
}
#if 0
static __apicdebuginit void print_APIC_bitfield (int base)
__apicdebuginit(void) print_APIC_bitfield(int base)
{
unsigned int v;
int i, j;
......@@ -1087,9 +1233,10 @@ static __apicdebuginit void print_APIC_bitfield (int base)
}
}
void __apicdebuginit print_local_APIC(void * dummy)
__apicdebuginit(void) print_local_APIC(void *dummy)
{
unsigned int v, ver, maxlvt;
unsigned long icr;
if (apic_verbosity == APIC_QUIET)
return;
......@@ -1097,7 +1244,7 @@ void __apicdebuginit print_local_APIC(void * dummy)
printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
smp_processor_id(), hard_smp_processor_id());
v = apic_read(APIC_ID);
printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, GET_APIC_ID(read_apic_id()));
printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, read_apic_id());
v = apic_read(APIC_LVR);
printk(KERN_INFO "... APIC VERSION: %08x\n", v);
ver = GET_APIC_VERSION(v);
......@@ -1133,10 +1280,9 @@ void __apicdebuginit print_local_APIC(void * dummy)
v = apic_read(APIC_ESR);
printk(KERN_DEBUG "... APIC ESR: %08x\n", v);
v = apic_read(APIC_ICR);
printk(KERN_DEBUG "... APIC ICR: %08x\n", v);
v = apic_read(APIC_ICR2);
printk(KERN_DEBUG "... APIC ICR2: %08x\n", v);
icr = apic_icr_read();
printk(KERN_DEBUG "... APIC ICR: %08x\n", icr);
printk(KERN_DEBUG "... APIC ICR2: %08x\n", icr >> 32);
v = apic_read(APIC_LVTT);
printk(KERN_DEBUG "... APIC LVTT: %08x\n", v);
......@@ -1164,12 +1310,12 @@ void __apicdebuginit print_local_APIC(void * dummy)
printk("\n");
}
void print_all_local_APICs (void)
__apicdebuginit(void) print_all_local_APICs(void)
{
on_each_cpu(print_local_APIC, NULL, 1);
}
void __apicdebuginit print_PIC(void)
__apicdebuginit(void) print_PIC(void)
{
unsigned int v;
unsigned long flags;
......@@ -1201,7 +1347,17 @@ void __apicdebuginit print_PIC(void)
printk(KERN_DEBUG "... PIC ELCR: %04x\n", v);
}
#endif /* 0 */
__apicdebuginit(int) print_all_ICs(void)
{
print_PIC();
print_all_local_APICs();
print_IO_APIC();
return 0;
}
fs_initcall(print_all_ICs);
void __init enable_IO_APIC(void)
{
......@@ -1291,7 +1447,7 @@ void disable_IO_APIC(void)
entry.dest_mode = 0; /* Physical */
entry.delivery_mode = dest_ExtINT; /* ExtInt */
entry.vector = 0;
entry.dest = GET_APIC_ID(read_apic_id());
entry.dest = read_apic_id();
/*
* Add it to the IO-APIC irq-routing table:
......@@ -1397,6 +1553,147 @@ static int ioapic_retrigger_irq(unsigned int irq)
*/
#ifdef CONFIG_SMP
#ifdef CONFIG_INTR_REMAP
static void ir_irq_migration(struct work_struct *work);
static DECLARE_DELAYED_WORK(ir_migration_work, ir_irq_migration);
/*
* Migrate the IO-APIC irq in the presence of intr-remapping.
*
* For edge triggered, irq migration is a simple atomic update(of vector
* and cpu destination) of IRTE and flush the hardware cache.
*
* For level triggered, we need to modify the io-apic RTE aswell with the update
* vector information, along with modifying IRTE with vector and destination.
* So irq migration for level triggered is little bit more complex compared to
* edge triggered migration. But the good news is, we use the same algorithm
* for level triggered migration as we have today, only difference being,
* we now initiate the irq migration from process context instead of the
* interrupt context.
*
* In future, when we do a directed EOI (combined with cpu EOI broadcast
* suppression) to the IO-APIC, level triggered irq migration will also be
* as simple as edge triggered migration and we can do the irq migration
* with a simple atomic update to IO-APIC RTE.
*/
static void migrate_ioapic_irq(int irq, cpumask_t mask)
{
struct irq_cfg *cfg = irq_cfg + irq;
struct irq_desc *desc = irq_desc + irq;
cpumask_t tmp, cleanup_mask;
struct irte irte;
int modify_ioapic_rte = desc->status & IRQ_LEVEL;
unsigned int dest;
unsigned long flags;
cpus_and(tmp, mask, cpu_online_map);
if (cpus_empty(tmp))
return;
if (get_irte(irq, &irte))
return;
if (assign_irq_vector(irq, mask))
return;
cpus_and(tmp, cfg->domain, mask);
dest = cpu_mask_to_apicid(tmp);
if (modify_ioapic_rte) {
spin_lock_irqsave(&ioapic_lock, flags);
__target_IO_APIC_irq(irq, dest, cfg->vector);
spin_unlock_irqrestore(&ioapic_lock, flags);
}
irte.vector = cfg->vector;
irte.dest_id = IRTE_DEST(dest);
/*
* Modified the IRTE and flushes the Interrupt entry cache.
*/
modify_irte(irq, &irte);
if (cfg->move_in_progress) {
cpus_and(cleanup_mask, cfg->old_domain, cpu_online_map);
cfg->move_cleanup_count = cpus_weight(cleanup_mask);
send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
cfg->move_in_progress = 0;
}
irq_desc[irq].affinity = mask;
}
static int migrate_irq_remapped_level(int irq)
{
int ret = -1;
mask_IO_APIC_irq(irq);
if (io_apic_level_ack_pending(irq)) {
/*
* Interrupt in progress. Migrating irq now will change the
* vector information in the IO-APIC RTE and that will confuse
* the EOI broadcast performed by cpu.
* So, delay the irq migration to the next instance.
*/
schedule_delayed_work(&ir_migration_work, 1);
goto unmask;
}
/* everthing is clear. we have right of way */
migrate_ioapic_irq(irq, irq_desc[irq].pending_mask);
ret = 0;
irq_desc[irq].status &= ~IRQ_MOVE_PENDING;
cpus_clear(irq_desc[irq].pending_mask);
unmask:
unmask_IO_APIC_irq(irq);
return ret;
}
static void ir_irq_migration(struct work_struct *work)
{
int irq;
for (irq = 0; irq < NR_IRQS; irq++) {
struct irq_desc *desc = irq_desc + irq;
if (desc->status & IRQ_MOVE_PENDING) {
unsigned long flags;
spin_lock_irqsave(&desc->lock, flags);
if (!desc->chip->set_affinity ||
!(desc->status & IRQ_MOVE_PENDING)) {
desc->status &= ~IRQ_MOVE_PENDING;
spin_unlock_irqrestore(&desc->lock, flags);
continue;
}
desc->chip->set_affinity(irq,
irq_desc[irq].pending_mask);
spin_unlock_irqrestore(&desc->lock, flags);
}
}
}
/*
* Migrates the IRQ destination in the process context.
*/
static void set_ir_ioapic_affinity_irq(unsigned int irq, cpumask_t mask)
{
if (irq_desc[irq].status & IRQ_LEVEL) {
irq_desc[irq].status |= IRQ_MOVE_PENDING;
irq_desc[irq].pending_mask = mask;
migrate_irq_remapped_level(irq);
return;
}
migrate_ioapic_irq(irq, mask);
}
#endif
asmlinkage void smp_irq_move_cleanup_interrupt(void)
{
unsigned vector, me;
......@@ -1453,6 +1750,17 @@ static void irq_complete_move(unsigned int irq)
#else
static inline void irq_complete_move(unsigned int irq) {}
#endif
#ifdef CONFIG_INTR_REMAP
static void ack_x2apic_level(unsigned int irq)
{
ack_x2APIC_irq();
}
static void ack_x2apic_edge(unsigned int irq)
{
ack_x2APIC_irq();
}
#endif
static void ack_apic_edge(unsigned int irq)
{
......@@ -1527,6 +1835,21 @@ static struct irq_chip ioapic_chip __read_mostly = {
.retrigger = ioapic_retrigger_irq,
};
#ifdef CONFIG_INTR_REMAP
static struct irq_chip ir_ioapic_chip __read_mostly = {
.name = "IR-IO-APIC",
.startup = startup_ioapic_irq,
.mask = mask_IO_APIC_irq,
.unmask = unmask_IO_APIC_irq,
.ack = ack_x2apic_edge,
.eoi = ack_x2apic_level,
#ifdef CONFIG_SMP
.set_affinity = set_ir_ioapic_affinity_irq,
#endif
.retrigger = ioapic_retrigger_irq,
};
#endif
static inline void init_IO_APIC_traps(void)
{
int irq;
......@@ -1712,6 +2035,8 @@ static inline void __init check_timer(void)
* 8259A.
*/
if (pin1 == -1) {
if (intr_remapping_enabled)
panic("BIOS bug: timer not connected to IO-APIC");
pin1 = pin2;
apic1 = apic2;
no_pin1 = 1;
......@@ -1738,6 +2063,8 @@ static inline void __init check_timer(void)
clear_IO_APIC_pin(0, pin1);
goto out;
}
if (intr_remapping_enabled)
panic("timer doesn't work through Interrupt-remapped IO-APIC");
clear_IO_APIC_pin(apic1, pin1);
if (!no_pin1)
apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: "
......@@ -1854,8 +2181,6 @@ void __init setup_IO_APIC(void)
setup_IO_APIC_irqs();
init_IO_APIC_traps();
check_timer();
if (!acpi_ioapic)
print_IO_APIC();
}
struct sysfs_ioapic_data {
......@@ -1977,6 +2302,9 @@ void destroy_irq(unsigned int irq)
dynamic_irq_cleanup(irq);
#ifdef CONFIG_INTR_REMAP
free_irte(irq);
#endif
spin_lock_irqsave(&vector_lock, flags);
__clear_irq_vector(irq);
spin_unlock_irqrestore(&vector_lock, flags);
......@@ -1995,10 +2323,41 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_ms
tmp = TARGET_CPUS;
err = assign_irq_vector(irq, tmp);
if (!err) {
cpus_and(tmp, cfg->domain, tmp);
dest = cpu_mask_to_apicid(tmp);
if (err)
return err;
cpus_and(tmp, cfg->domain, tmp);
dest = cpu_mask_to_apicid(tmp);
#ifdef CONFIG_INTR_REMAP
if (irq_remapped(irq)) {
struct irte irte;
int ir_index;
u16 sub_handle;
ir_index = map_irq_to_irte_handle(irq, &sub_handle);
BUG_ON(ir_index == -1);
memset (&irte, 0, sizeof(irte));
irte.present = 1;
irte.dst_mode = INT_DEST_MODE;
irte.trigger_mode = 0; /* edge */
irte.dlvry_mode = INT_DELIVERY_MODE;
irte.vector = cfg->vector;
irte.dest_id = IRTE_DEST(dest);
modify_irte(irq, &irte);
msg->address_hi = MSI_ADDR_BASE_HI;
msg->data = sub_handle;
msg->address_lo = MSI_ADDR_BASE_LO | MSI_ADDR_IR_EXT_INT |
MSI_ADDR_IR_SHV |
MSI_ADDR_IR_INDEX1(ir_index) |
MSI_ADDR_IR_INDEX2(ir_index);
} else
#endif
{
msg->address_hi = MSI_ADDR_BASE_HI;
msg->address_lo =
MSI_ADDR_BASE_LO |
......@@ -2049,6 +2408,55 @@ static void set_msi_irq_affinity(unsigned int irq, cpumask_t mask)
write_msi_msg(irq, &msg);
irq_desc[irq].affinity = mask;
}
#ifdef CONFIG_INTR_REMAP
/*
* Migrate the MSI irq to another cpumask. This migration is
* done in the process context using interrupt-remapping hardware.
*/
static void ir_set_msi_irq_affinity(unsigned int irq, cpumask_t mask)
{
struct irq_cfg *cfg = irq_cfg + irq;
unsigned int dest;
cpumask_t tmp, cleanup_mask;
struct irte irte;
cpus_and(tmp, mask, cpu_online_map);
if (cpus_empty(tmp))
return;
if (get_irte(irq, &irte))
return;
if (assign_irq_vector(irq, mask))
return;
cpus_and(tmp, cfg->domain, mask);
dest = cpu_mask_to_apicid(tmp);
irte.vector = cfg->vector;
irte.dest_id = IRTE_DEST(dest);
/*
* atomically update the IRTE with the new destination and vector.
*/
modify_irte(irq, &irte);
/*
* After this point, all the interrupts will start arriving
* at the new destination. So, time to cleanup the previous
* vector allocation.
*/
if (cfg->move_in_progress) {
cpus_and(cleanup_mask, cfg->old_domain, cpu_online_map);
cfg->move_cleanup_count = cpus_weight(cleanup_mask);
send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
cfg->move_in_progress = 0;
}
irq_desc[irq].affinity = mask;
}
#endif
#endif /* CONFIG_SMP */
/*
......@@ -2066,26 +2474,157 @@ static struct irq_chip msi_chip = {
.retrigger = ioapic_retrigger_irq,
};
int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
#ifdef CONFIG_INTR_REMAP
static struct irq_chip msi_ir_chip = {
.name = "IR-PCI-MSI",
.unmask = unmask_msi_irq,
.mask = mask_msi_irq,
.ack = ack_x2apic_edge,
#ifdef CONFIG_SMP
.set_affinity = ir_set_msi_irq_affinity,
#endif
.retrigger = ioapic_retrigger_irq,
};
/*
* Map the PCI dev to the corresponding remapping hardware unit
* and allocate 'nvec' consecutive interrupt-remapping table entries
* in it.
*/
static int msi_alloc_irte(struct pci_dev *dev, int irq, int nvec)
{
struct intel_iommu *iommu;
int index;
iommu = map_dev_to_ir(dev);
if (!iommu) {
printk(KERN_ERR
"Unable to map PCI %s to iommu\n", pci_name(dev));
return -ENOENT;
}
index = alloc_irte(iommu, irq, nvec);
if (index < 0) {
printk(KERN_ERR
"Unable to allocate %d IRTE for PCI %s\n", nvec,
pci_name(dev));
return -ENOSPC;
}
return index;
}
#endif
static int setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc, int irq)
{
int ret;
struct msi_msg msg;
ret = msi_compose_msg(dev, irq, &msg);
if (ret < 0)
return ret;
set_irq_msi(irq, desc);
write_msi_msg(irq, &msg);
#ifdef CONFIG_INTR_REMAP
if (irq_remapped(irq)) {
struct irq_desc *desc = irq_desc + irq;
/*
* irq migration in process context
*/
desc->status |= IRQ_MOVE_PCNTXT;
set_irq_chip_and_handler_name(irq, &msi_ir_chip, handle_edge_irq, "edge");
} else
#endif
set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, "edge");
return 0;
}
int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
{
int irq, ret;
irq = create_irq();
if (irq < 0)
return irq;
ret = msi_compose_msg(dev, irq, &msg);
#ifdef CONFIG_INTR_REMAP
if (!intr_remapping_enabled)
goto no_ir;
ret = msi_alloc_irte(dev, irq, 1);
if (ret < 0)
goto error;
no_ir:
#endif
ret = setup_msi_irq(dev, desc, irq);
if (ret < 0) {
destroy_irq(irq);
return ret;
}
return 0;
set_irq_msi(irq, desc);
write_msi_msg(irq, &msg);
#ifdef CONFIG_INTR_REMAP
error:
destroy_irq(irq);
return ret;
#endif
}
set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, "edge");
int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
{
int irq, ret, sub_handle;
struct msi_desc *desc;
#ifdef CONFIG_INTR_REMAP
struct intel_iommu *iommu = 0;
int index = 0;
#endif
sub_handle = 0;
list_for_each_entry(desc, &dev->msi_list, list) {
irq = create_irq();
if (irq < 0)
return irq;
#ifdef CONFIG_INTR_REMAP
if (!intr_remapping_enabled)
goto no_ir;
if (!sub_handle) {
/*
* allocate the consecutive block of IRTE's
* for 'nvec'
*/
index = msi_alloc_irte(dev, irq, nvec);
if (index < 0) {
ret = index;
goto error;
}
} else {
iommu = map_dev_to_ir(dev);
if (!iommu) {
ret = -ENOENT;
goto error;
}
/*
* setup the mapping between the irq and the IRTE
* base index, the sub_handle pointing to the
* appropriate interrupt remap table entry.
*/
set_irte_irq(irq, iommu, index, sub_handle);
}
no_ir:
#endif
ret = setup_msi_irq(dev, desc, irq);
if (ret < 0)
goto error;
sub_handle++;
}
return 0;
error:
destroy_irq(irq);
return ret;
}
void arch_teardown_msi_irq(unsigned int irq)
......@@ -2333,6 +2872,10 @@ void __init setup_ioapic_dest(void)
setup_IO_APIC_irq(ioapic, pin, irq,
irq_trigger(irq_entry),
irq_polarity(irq_entry));
#ifdef CONFIG_INTR_REMAP
else if (intr_remapping_enabled)
set_ir_ioapic_affinity_irq(irq, TARGET_CPUS);
#endif
else
set_ioapic_affinity_irq(irq, TARGET_CPUS);
}
......
arch/x86/kernel/irqinit_32.c
View file @ d8470596
......@@ -74,6 +74,15 @@ void __init init_ISA_irqs (void)
}
}
/*
* IRQ2 is cascade interrupt to second interrupt controller
*/
static struct irqaction irq2 = {
.handler = no_action,
.mask = CPU_MASK_NONE,
.name = "cascade",
};
/* Overridden in paravirt.c */
void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
......@@ -98,6 +107,46 @@ void __init native_init_IRQ(void)
set_intr_gate(vector, interrupt[i]);
}
#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_SMP)
/*
* IRQ0 must be given a fixed assignment and initialized,
* because it's used before the IO-APIC is set up.
*/
set_intr_gate(FIRST_DEVICE_VECTOR, interrupt[0]);
/*
* The reschedule interrupt is a CPU-to-CPU reschedule-helper
* IPI, driven by wakeup.
*/
alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
/* IPI for invalidation */
alloc_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt);
/* IPI for generic function call */
alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
/* IPI for single call function */
set_intr_gate(CALL_FUNCTION_SINGLE_VECTOR, call_function_single_interrupt);
#endif
#ifdef CONFIG_X86_LOCAL_APIC
/* self generated IPI for local APIC timer */
alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
/* IPI vectors for APIC spurious and error interrupts */
alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
#endif
#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_MCE_P4THERMAL)
/* thermal monitor LVT interrupt */
alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
#endif
if (!acpi_ioapic)
setup_irq(2, &irq2);
/* setup after call gates are initialised (usually add in
* the architecture specific gates)
*/
......
arch/x86/kernel/mpparse.c
View file @ d8470596
......@@ -397,7 +397,9 @@ static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early)
generic_bigsmp_probe();
#endif
#ifdef CONFIG_X86_32
setup_apic_routing();
#endif
if (!num_processors)
printk(KERN_ERR "MPTABLE: no processors registered!\n");
return num_processors;
......
arch/x86/kernel/numaq_32.c
View file @ d8470596
......@@ -229,6 +229,12 @@ static void __init smp_read_mpc_oem(struct mp_config_oemtable *oemtable,
}
}
static int __init numaq_setup_ioapic_ids(void)
{
/* so can skip it */
return 1;
}
static struct x86_quirks numaq_x86_quirks __initdata = {
.arch_pre_time_init = numaq_pre_time_init,
.arch_time_init = NULL,
......@@ -243,6 +249,7 @@ static struct x86_quirks numaq_x86_quirks __initdata = {
.mpc_oem_bus_info = mpc_oem_bus_info,
.mpc_oem_pci_bus = mpc_oem_pci_bus,
.smp_read_mpc_oem = smp_read_mpc_oem,
.setup_ioapic_ids = numaq_setup_ioapic_ids,
};
void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
......
arch/x86/kernel/paravirt.c
View file @ d8470596
......@@ -374,8 +374,6 @@ struct pv_cpu_ops pv_cpu_ops = {
struct pv_apic_ops pv_apic_ops = {
#ifdef CONFIG_X86_LOCAL_APIC
.apic_write = native_apic_write,
.apic_read = native_apic_read,
.setup_boot_clock = setup_boot_APIC_clock,
.setup_secondary_clock = setup_secondary_APIC_clock,
.startup_ipi_hook = paravirt_nop,
......
arch/x86/kernel/setup.c
View file @ d8470596
......@@ -758,6 +758,8 @@ void __init setup_arch(char **cmdline_p)
#else
num_physpages = max_pfn;
if (cpu_has_x2apic)
check_x2apic();
/* How many end-of-memory variables you have, grandma! */
/* need this before calling reserve_initrd */
......
arch/x86/kernel/smpboot.c
View file @ d8470596
......@@ -123,7 +123,6 @@ EXPORT_PER_CPU_SYMBOL(cpu_info);
static atomic_t init_deasserted;
static int boot_cpu_logical_apicid;
/* representing cpus for which sibling maps can be computed */
static cpumask_t cpu_sibling_setup_map;
......@@ -165,6 +164,8 @@ static void unmap_cpu_to_node(int cpu)
#endif
#ifdef CONFIG_X86_32
static int boot_cpu_logical_apicid;
u8 cpu_2_logical_apicid[NR_CPUS] __read_mostly =
{ [0 ... NR_CPUS-1] = BAD_APICID };
......@@ -210,7 +211,7 @@ static void __cpuinit smp_callin(void)
/*
* (This works even if the APIC is not enabled.)
*/
phys_id = GET_APIC_ID(read_apic_id());
phys_id = read_apic_id();
cpuid = smp_processor_id();
if (cpu_isset(cpuid, cpu_callin_map)) {
panic("%s: phys CPU#%d, CPU#%d already present??\n", __func__,
......@@ -550,8 +551,7 @@ static inline void __inquire_remote_apic(int apicid)
printk(KERN_CONT
"a previous APIC delivery may have failed\n");
apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
apic_write(APIC_ICR, APIC_DM_REMRD | regs[i]);
apic_icr_write(APIC_DM_REMRD | regs[i], apicid);
timeout = 0;
do {
......@@ -583,11 +583,9 @@ wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip)
int maxlvt;
/* Target chip */
apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(logical_apicid));
/* Boot on the stack */
/* Kick the second */
apic_write(APIC_ICR, APIC_DM_NMI | APIC_DEST_LOGICAL);
apic_icr_write(APIC_DM_NMI | APIC_DEST_LOGICAL, logical_apicid);
pr_debug("Waiting for send to finish...\n");
send_status = safe_apic_wait_icr_idle();
......@@ -640,13 +638,11 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
/*
* Turn INIT on target chip
*/
apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
/*
* Send IPI
*/
apic_write(APIC_ICR,
APIC_INT_LEVELTRIG | APIC_INT_ASSERT | APIC_DM_INIT);
apic_icr_write(APIC_INT_LEVELTRIG | APIC_INT_ASSERT | APIC_DM_INIT,
phys_apicid);
pr_debug("Waiting for send to finish...\n");
send_status = safe_apic_wait_icr_idle();
......@@ -656,10 +652,8 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
pr_debug("Deasserting INIT.\n");
/* Target chip */
apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
/* Send IPI */
apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT);
apic_icr_write(APIC_INT_LEVELTRIG | APIC_DM_INIT, phys_apicid);
pr_debug("Waiting for send to finish...\n");
send_status = safe_apic_wait_icr_idle();
......@@ -702,11 +696,10 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
*/
/* Target chip */
apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
/* Boot on the stack */
/* Kick the second */
apic_write(APIC_ICR, APIC_DM_STARTUP | (start_eip >> 12));
apic_icr_write(APIC_DM_STARTUP | (start_eip >> 12),
phys_apicid);
/*
* Give the other CPU some time to accept the IPI.
......@@ -1175,10 +1168,17 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
* Setup boot CPU information
*/
smp_store_cpu_info(0); /* Final full version of the data */
#ifdef CONFIG_X86_32
boot_cpu_logical_apicid = logical_smp_processor_id();
#endif
current_thread_info()->cpu = 0; /* needed? */
set_cpu_sibling_map(0);
#ifdef CONFIG_X86_64
enable_IR_x2apic();
setup_apic_routing();
#endif
if (smp_sanity_check(max_cpus) < 0) {
printk(KERN_INFO "SMP disabled\n");
disable_smp();
......@@ -1186,9 +1186,9 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
}
preempt_disable();
if (GET_APIC_ID(read_apic_id()) != boot_cpu_physical_apicid) {
if (read_apic_id() != boot_cpu_physical_apicid) {
panic("Boot APIC ID in local APIC unexpected (%d vs %d)",
GET_APIC_ID(read_apic_id()), boot_cpu_physical_apicid);
read_apic_id(), boot_cpu_physical_apicid);
/* Or can we switch back to PIC here? */
}
preempt_enable();
......
arch/x86/kernel/summit_32.c
View file @ d8470596
......@@ -30,7 +30,7 @@
#include <linux/init.h>
#include <asm/io.h>
#include <asm/bios_ebda.h>
#include <asm/mach-summit/mach_mpparse.h>
#include <asm/summit/mpparse.h>
static struct rio_table_hdr *rio_table_hdr __initdata;
static struct scal_detail *scal_devs[MAX_NUMNODES] __initdata;
......
arch/x86/kernel/vmi_32.c
View file @ d8470596
......@@ -905,8 +905,8 @@ static inline int __init activate_vmi(void)
#endif
#ifdef CONFIG_X86_LOCAL_APIC
para_fill(pv_apic_ops.apic_read, APICRead);
para_fill(pv_apic_ops.apic_write, APICWrite);
para_fill(apic_ops->read, APICRead);
para_fill(apic_ops->write, APICWrite);
#endif
/*
......
arch/x86/lguest/boot.c
View file @ d8470596
......@@ -55,6 +55,7 @@
#include <linux/lguest_launcher.h>
#include <linux/virtio_console.h>
#include <linux/pm.h>
#include <asm/apic.h>
#include <asm/lguest.h>
#include <asm/paravirt.h>
#include <asm/param.h>
......@@ -783,14 +784,44 @@ static void lguest_wbinvd(void)
* code qualifies for Advanced. It will also never interrupt anything. It
* does, however, allow us to get through the Linux boot code. */
#ifdef CONFIG_X86_LOCAL_APIC
static void lguest_apic_write(unsigned long reg, u32 v)
static void lguest_apic_write(u32 reg, u32 v)
{
}
static u32 lguest_apic_read(unsigned long reg)
static u32 lguest_apic_read(u32 reg)
{
return 0;
}
static u64 lguest_apic_icr_read(void)
{
return 0;
}
static void lguest_apic_icr_write(u32 low, u32 id)
{
/* Warn to see if there's any stray references */
WARN_ON(1);
}
static void lguest_apic_wait_icr_idle(void)
{
return;
}
static u32 lguest_apic_safe_wait_icr_idle(void)
{
return 0;
}
static struct apic_ops lguest_basic_apic_ops = {
.read = lguest_apic_read,
.write = lguest_apic_write,
.icr_read = lguest_apic_icr_read,
.icr_write = lguest_apic_icr_write,
.wait_icr_idle = lguest_apic_wait_icr_idle,
.safe_wait_icr_idle = lguest_apic_safe_wait_icr_idle,
};
#endif
/* STOP! Until an interrupt comes in. */
......@@ -990,8 +1021,7 @@ __init void lguest_init(void)
#ifdef CONFIG_X86_LOCAL_APIC
/* apic read/write intercepts */
pv_apic_ops.apic_write = lguest_apic_write;
pv_apic_ops.apic_read = lguest_apic_read;
apic_ops = &lguest_basic_apic_ops;
#endif
/* time operations */
......
arch/x86/mach-default/setup.c
View file @ d8470596
......@@ -38,15 +38,6 @@ void __init pre_intr_init_hook(void)
init_ISA_irqs();
}
/*
* IRQ2 is cascade interrupt to second interrupt controller
*/
static struct irqaction irq2 = {
.handler = no_action,
.mask = CPU_MASK_NONE,
.name = "cascade",
};
/**
* intr_init_hook - post gate setup interrupt initialisation
*
......@@ -62,12 +53,6 @@ void __init intr_init_hook(void)
if (x86_quirks->arch_intr_init())
return;
}
#ifdef CONFIG_X86_LOCAL_APIC
apic_intr_init();
#endif
if (!acpi_ioapic)
setup_irq(2, &irq2);
}
/**
......
arch/x86/mach-generic/Makefile
View file @ d8470596
......@@ -9,4 +9,4 @@ obj-$(CONFIG_X86_NUMAQ) += numaq.o
obj-$(CONFIG_X86_SUMMIT) += summit.o
obj-$(CONFIG_X86_BIGSMP) += bigsmp.o
obj-$(CONFIG_X86_ES7000) += es7000.o
obj-$(CONFIG_X86_ES7000) += ../../x86/mach-es7000/
obj-$(CONFIG_X86_ES7000) += ../../x86/es7000/
arch/x86/mach-generic/bigsmp.c
View file @ d8470596
......@@ -5,18 +5,17 @@
#define APIC_DEFINITION 1
#include <linux/threads.h>
#include <linux/cpumask.h>
#include <asm/smp.h>
#include <asm/mpspec.h>
#include <asm/genapic.h>
#include <asm/fixmap.h>
#include <asm/apicdef.h>
#include <linux/kernel.h>
#include <linux/smp.h>
#include <linux/init.h>
#include <linux/dmi.h>
#include <asm/mach-bigsmp/mach_apic.h>
#include <asm/mach-bigsmp/mach_apicdef.h>
#include <asm/mach-bigsmp/mach_ipi.h>
#include <asm/bigsmp/apicdef.h>
#include <linux/smp.h>
#include <asm/bigsmp/apic.h>
#include <asm/bigsmp/ipi.h>
#include <asm/mach-default/mach_mpparse.h>
static int dmi_bigsmp; /* can be set by dmi scanners */
......
arch/x86/mach-generic/es7000.c
View file @ d8470596
......@@ -4,20 +4,19 @@
#define APIC_DEFINITION 1
#include <linux/threads.h>
#include <linux/cpumask.h>
#include <asm/smp.h>
#include <asm/mpspec.h>
#include <asm/genapic.h>
#include <asm/fixmap.h>
#include <asm/apicdef.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/smp.h>
#include <linux/init.h>
#include <asm/mach-es7000/mach_apicdef.h>
#include <asm/mach-es7000/mach_apic.h>
#include <asm/mach-es7000/mach_ipi.h>
#include <asm/mach-es7000/mach_mpparse.h>
#include <asm/mach-es7000/mach_wakecpu.h>
#include <asm/es7000/apicdef.h>
#include <linux/smp.h>
#include <asm/es7000/apic.h>
#include <asm/es7000/ipi.h>
#include <asm/es7000/mpparse.h>
#include <asm/es7000/wakecpu.h>
static int probe_es7000(void)
{
......
arch/x86/mach-generic/numaq.c
View file @ d8470596
......@@ -4,7 +4,6 @@
#define APIC_DEFINITION 1
#include <linux/threads.h>
#include <linux/cpumask.h>
#include <linux/smp.h>
#include <asm/mpspec.h>
#include <asm/genapic.h>
#include <asm/fixmap.h>
......@@ -12,11 +11,12 @@
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/init.h>
#include <asm/mach-numaq/mach_apic.h>
#include <asm/mach-numaq/mach_apicdef.h>
#include <asm/mach-numaq/mach_ipi.h>
#include <asm/mach-numaq/mach_mpparse.h>
#include <asm/mach-numaq/mach_wakecpu.h>
#include <asm/numaq/apicdef.h>
#include <linux/smp.h>
#include <asm/numaq/apic.h>
#include <asm/numaq/ipi.h>
#include <asm/numaq/mpparse.h>
#include <asm/numaq/wakecpu.h>
#include <asm/numaq.h>
static int mps_oem_check(struct mp_config_table *mpc, char *oem,
......
arch/x86/mach-generic/summit.c
View file @ d8470596
......@@ -4,19 +4,18 @@
#define APIC_DEFINITION 1
#include <linux/threads.h>
#include <linux/cpumask.h>
#include <asm/smp.h>
#include <asm/mpspec.h>
#include <asm/genapic.h>
#include <asm/fixmap.h>
#include <asm/apicdef.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/smp.h>
#include <linux/init.h>
#include <asm/mach-summit/mach_apic.h>
#include <asm/mach-summit/mach_apicdef.h>
#include <asm/mach-summit/mach_ipi.h>
#include <asm/mach-summit/mach_mpparse.h>
#include <asm/summit/apicdef.h>
#include <linux/smp.h>
#include <asm/summit/apic.h>
#include <asm/summit/ipi.h>
#include <asm/summit/mpparse.h>
static int probe_summit(void)
{
......
arch/x86/pci/acpi.c
View file @ d8470596
......@@ -250,10 +250,5 @@ int __init pci_acpi_init(void)
acpi_pci_irq_enable(dev);
}
#ifdef CONFIG_X86_IO_APIC
if (acpi_ioapic)
print_IO_APIC();
#endif
return 0;
}
arch/x86/xen/enlighten.c
View file @ d8470596
......@@ -36,6 +36,7 @@
#include <xen/hvc-console.h>
#include <asm/paravirt.h>
#include <asm/apic.h>
#include <asm/page.h>
#include <asm/xen/hypercall.h>
#include <asm/xen/hypervisor.h>
......@@ -580,16 +581,47 @@ static void xen_io_delay(void)
}
#ifdef CONFIG_X86_LOCAL_APIC
static u32 xen_apic_read(unsigned long reg)
static u32 xen_apic_read(u32 reg)
{
return 0;
}
static void xen_apic_write(unsigned long reg, u32 val)
static void xen_apic_write(u32 reg, u32 val)
{
/* Warn to see if there's any stray references */
WARN_ON(1);
}
static u64 xen_apic_icr_read(void)
{
return 0;
}
static void xen_apic_icr_write(u32 low, u32 id)
{
/* Warn to see if there's any stray references */
WARN_ON(1);
}
static void xen_apic_wait_icr_idle(void)
{
return;
}
static u32 xen_safe_apic_wait_icr_idle(void)
{
return 0;
}
static struct apic_ops xen_basic_apic_ops = {
.read = xen_apic_read,
.write = xen_apic_write,
.icr_read = xen_apic_icr_read,
.icr_write = xen_apic_icr_write,
.wait_icr_idle = xen_apic_wait_icr_idle,
.safe_wait_icr_idle = xen_safe_apic_wait_icr_idle,
};
#endif
static void xen_flush_tlb(void)
......@@ -1273,8 +1305,6 @@ static const struct pv_irq_ops xen_irq_ops __initdata = {
static const struct pv_apic_ops xen_apic_ops __initdata = {
#ifdef CONFIG_X86_LOCAL_APIC
.apic_write = xen_apic_write,
.apic_read = xen_apic_read,
.setup_boot_clock = paravirt_nop,
.setup_secondary_clock = paravirt_nop,
.startup_ipi_hook = paravirt_nop,
......@@ -1677,6 +1707,13 @@ asmlinkage void __init xen_start_kernel(void)
pv_apic_ops = xen_apic_ops;
pv_mmu_ops = xen_mmu_ops;
#ifdef CONFIG_X86_LOCAL_APIC
/*
* set up the basic apic ops.
*/
apic_ops = &xen_basic_apic_ops;
#endif
if (xen_feature(XENFEAT_mmu_pt_update_preserve_ad)) {
pv_mmu_ops.ptep_modify_prot_start = xen_ptep_modify_prot_start;
pv_mmu_ops.ptep_modify_prot_commit = xen_ptep_modify_prot_commit;
......
drivers/pci/Makefile
View file @ d8470596
......@@ -26,6 +26,8 @@ obj-$(CONFIG_HT_IRQ) += htirq.o
# Build Intel IOMMU support
obj-$(CONFIG_DMAR) += dmar.o iova.o intel-iommu.o
obj-$(CONFIG_INTR_REMAP) += dmar.o intr_remapping.o
#
# Some architectures use the generic PCI setup functions
#
......
drivers/pci/dma_remapping.h 0 → 100644
View file @ d8470596
#ifndef _DMA_REMAPPING_H
#define _DMA_REMAPPING_H
/*
* We need a fixed PAGE_SIZE of 4K irrespective of
* arch PAGE_SIZE for IOMMU page tables.
*/
#define PAGE_SHIFT_4K (12)
#define PAGE_SIZE_4K (1UL << PAGE_SHIFT_4K)
#define PAGE_MASK_4K (((u64)-1) << PAGE_SHIFT_4K)
#define PAGE_ALIGN_4K(addr) (((addr) + PAGE_SIZE_4K - 1) & PAGE_MASK_4K)
#define IOVA_PFN(addr) ((addr) >> PAGE_SHIFT_4K)
#define DMA_32BIT_PFN IOVA_PFN(DMA_32BIT_MASK)
#define DMA_64BIT_PFN IOVA_PFN(DMA_64BIT_MASK)
/*
* 0: Present
* 1-11: Reserved
* 12-63: Context Ptr (12 - (haw-1))
* 64-127: Reserved
*/
struct root_entry {
u64 val;
u64 rsvd1;
};
#define ROOT_ENTRY_NR (PAGE_SIZE_4K/sizeof(struct root_entry))
static inline bool root_present(struct root_entry *root)
{
return (root->val & 1);
}
static inline void set_root_present(struct root_entry *root)
{
root->val |= 1;
}
static inline void set_root_value(struct root_entry *root, unsigned long value)
{
root->val |= value & PAGE_MASK_4K;
}
struct context_entry;
static inline struct context_entry *
get_context_addr_from_root(struct root_entry *root)
{
return (struct context_entry *)
(root_present(root)?phys_to_virt(
root->val & PAGE_MASK_4K):
NULL);
}
/*
* low 64 bits:
* 0: present
* 1: fault processing disable
* 2-3: translation type
* 12-63: address space root
* high 64 bits:
* 0-2: address width
* 3-6: aval
* 8-23: domain id
*/
struct context_entry {
u64 lo;
u64 hi;
};
#define context_present(c) ((c).lo & 1)
#define context_fault_disable(c) (((c).lo >> 1) & 1)
#define context_translation_type(c) (((c).lo >> 2) & 3)
#define context_address_root(c) ((c).lo & PAGE_MASK_4K)
#define context_address_width(c) ((c).hi & 7)
#define context_domain_id(c) (((c).hi >> 8) & ((1 << 16) - 1))
#define context_set_present(c) do {(c).lo |= 1;} while (0)
#define context_set_fault_enable(c) \
do {(c).lo &= (((u64)-1) << 2) | 1;} while (0)
#define context_set_translation_type(c, val) \
do { \
(c).lo &= (((u64)-1) << 4) | 3; \
(c).lo |= ((val) & 3) << 2; \
} while (0)
#define CONTEXT_TT_MULTI_LEVEL 0
#define context_set_address_root(c, val) \
do {(c).lo |= (val) & PAGE_MASK_4K;} while (0)
#define context_set_address_width(c, val) do {(c).hi |= (val) & 7;} while (0)
#define context_set_domain_id(c, val) \
do {(c).hi |= ((val) & ((1 << 16) - 1)) << 8;} while (0)
#define context_clear_entry(c) do {(c).lo = 0; (c).hi = 0;} while (0)
/*
* 0: readable
* 1: writable
* 2-6: reserved
* 7: super page
* 8-11: available
* 12-63: Host physcial address
*/
struct dma_pte {
u64 val;
};
#define dma_clear_pte(p) do {(p).val = 0;} while (0)
#define DMA_PTE_READ (1)
#define DMA_PTE_WRITE (2)
#define dma_set_pte_readable(p) do {(p).val |= DMA_PTE_READ;} while (0)
#define dma_set_pte_writable(p) do {(p).val |= DMA_PTE_WRITE;} while (0)
#define dma_set_pte_prot(p, prot) \
do {(p).val = ((p).val & ~3) | ((prot) & 3); } while (0)
#define dma_pte_addr(p) ((p).val & PAGE_MASK_4K)
#define dma_set_pte_addr(p, addr) do {\
(p).val |= ((addr) & PAGE_MASK_4K); } while (0)
#define dma_pte_present(p) (((p).val & 3) != 0)
struct intel_iommu;
struct dmar_domain {
int id; /* domain id */
struct intel_iommu *iommu; /* back pointer to owning iommu */
struct list_head devices; /* all devices' list */
struct iova_domain iovad; /* iova's that belong to this domain */
struct dma_pte *pgd; /* virtual address */
spinlock_t mapping_lock; /* page table lock */
int gaw; /* max guest address width */
/* adjusted guest address width, 0 is level 2 30-bit */
int agaw;
#define DOMAIN_FLAG_MULTIPLE_DEVICES 1
int flags;
};
/* PCI domain-device relationship */
struct device_domain_info {
struct list_head link; /* link to domain siblings */
struct list_head global; /* link to global list */
u8 bus; /* PCI bus numer */
u8 devfn; /* PCI devfn number */
struct pci_dev *dev; /* it's NULL for PCIE-to-PCI bridge */
struct dmar_domain *domain; /* pointer to domain */
};
extern int init_dmars(void);
extern void free_dmar_iommu(struct intel_iommu *iommu);
extern int dmar_disabled;
#ifndef CONFIG_DMAR_GFX_WA
static inline void iommu_prepare_gfx_mapping(void)
{
return;
}
#endif /* !CONFIG_DMAR_GFX_WA */
#endif
drivers/pci/dmar.c
View file @ d8470596
......@@ -19,13 +19,16 @@
* Author: Shaohua Li <shaohua.li@intel.com>
* Author: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
*
* This file implements early detection/parsing of DMA Remapping Devices
* This file implements early detection/parsing of Remapping Devices
* reported to OS through BIOS via DMA remapping reporting (DMAR) ACPI
* tables.
*
* These routines are used by both DMA-remapping and Interrupt-remapping
*/
#include <linux/pci.h>
#include <linux/dmar.h>
#include <linux/timer.h>
#include "iova.h"
#include "intel-iommu.h"
......@@ -37,7 +40,6 @@
* these units are not supported by the architecture.
*/
LIST_HEAD(dmar_drhd_units);
LIST_HEAD(dmar_rmrr_units);
static struct acpi_table_header * __initdata dmar_tbl;
......@@ -53,11 +55,6 @@ static void __init dmar_register_drhd_unit(struct dmar_drhd_unit *drhd)
list_add(&drhd->list, &dmar_drhd_units);
}
static void __init dmar_register_rmrr_unit(struct dmar_rmrr_unit *rmrr)
{
list_add(&rmrr->list, &dmar_rmrr_units);
}
static int __init dmar_parse_one_dev_scope(struct acpi_dmar_device_scope *scope,
struct pci_dev **dev, u16 segment)
{
......@@ -172,19 +169,37 @@ dmar_parse_one_drhd(struct acpi_dmar_header *header)
struct acpi_dmar_hardware_unit *drhd;
struct dmar_drhd_unit *dmaru;
int ret = 0;
static int include_all;
dmaru = kzalloc(sizeof(*dmaru), GFP_KERNEL);
if (!dmaru)
return -ENOMEM;
dmaru->hdr = header;
drhd = (struct acpi_dmar_hardware_unit *)header;
dmaru->reg_base_addr = drhd->address;
dmaru->include_all = drhd->flags & 0x1; /* BIT0: INCLUDE_ALL */
ret = alloc_iommu(dmaru);
if (ret) {
kfree(dmaru);
return ret;
}
dmar_register_drhd_unit(dmaru);
return 0;
}
static int __init
dmar_parse_dev(struct dmar_drhd_unit *dmaru)
{
struct acpi_dmar_hardware_unit *drhd;
static int include_all;
int ret;
drhd = (struct acpi_dmar_hardware_unit *) dmaru->hdr;
if (!dmaru->include_all)
ret = dmar_parse_dev_scope((void *)(drhd + 1),
((void *)drhd) + header->length,
((void *)drhd) + drhd->header.length,
&dmaru->devices_cnt, &dmaru->devices,
drhd->segment);
else {
......@@ -197,37 +212,59 @@ dmar_parse_one_drhd(struct acpi_dmar_header *header)
include_all = 1;
}
if (ret || (dmaru->devices_cnt == 0 && !dmaru->include_all))
if (ret || (dmaru->devices_cnt == 0 && !dmaru->include_all)) {
list_del(&dmaru->list);
kfree(dmaru);
else
dmar_register_drhd_unit(dmaru);
}
return ret;
}
#ifdef CONFIG_DMAR
LIST_HEAD(dmar_rmrr_units);
static void __init dmar_register_rmrr_unit(struct dmar_rmrr_unit *rmrr)
{
list_add(&rmrr->list, &dmar_rmrr_units);
}
static int __init
dmar_parse_one_rmrr(struct acpi_dmar_header *header)
{
struct acpi_dmar_reserved_memory *rmrr;
struct dmar_rmrr_unit *rmrru;
int ret = 0;
rmrru = kzalloc(sizeof(*rmrru), GFP_KERNEL);
if (!rmrru)
return -ENOMEM;
rmrru->hdr = header;
rmrr = (struct acpi_dmar_reserved_memory *)header;
rmrru->base_address = rmrr->base_address;
rmrru->end_address = rmrr->end_address;
dmar_register_rmrr_unit(rmrru);
return 0;
}
static int __init
rmrr_parse_dev(struct dmar_rmrr_unit *rmrru)
{
struct acpi_dmar_reserved_memory *rmrr;
int ret;
rmrr = (struct acpi_dmar_reserved_memory *) rmrru->hdr;
ret = dmar_parse_dev_scope((void *)(rmrr + 1),
((void *)rmrr) + header->length,
((void *)rmrr) + rmrr->header.length,
&rmrru->devices_cnt, &rmrru->devices, rmrr->segment);
if (ret || (rmrru->devices_cnt == 0))
if (ret || (rmrru->devices_cnt == 0)) {
list_del(&rmrru->list);
kfree(rmrru);
else
dmar_register_rmrr_unit(rmrru);
}
return ret;
}
#endif
static void __init
dmar_table_print_dmar_entry(struct acpi_dmar_header *header)
......@@ -252,6 +289,7 @@ dmar_table_print_dmar_entry(struct acpi_dmar_header *header)
}
}
/**
* parse_dmar_table - parses the DMA reporting table
*/
......@@ -284,7 +322,9 @@ parse_dmar_table(void)
ret = dmar_parse_one_drhd(entry_header);
break;
case ACPI_DMAR_TYPE_RESERVED_MEMORY:
#ifdef CONFIG_DMAR
ret = dmar_parse_one_rmrr(entry_header);
#endif
break;
default:
printk(KERN_WARNING PREFIX
......@@ -300,15 +340,77 @@ parse_dmar_table(void)
return ret;
}
int dmar_pci_device_match(struct pci_dev *devices[], int cnt,
struct pci_dev *dev)
{
int index;
while (dev) {
for (index = 0; index < cnt; index++)
if (dev == devices[index])
return 1;
int __init dmar_table_init(void)
/* Check our parent */
dev = dev->bus->self;
}
return 0;
}
struct dmar_drhd_unit *
dmar_find_matched_drhd_unit(struct pci_dev *dev)
{
struct dmar_drhd_unit *drhd = NULL;
list_for_each_entry(drhd, &dmar_drhd_units, list) {
if (drhd->include_all || dmar_pci_device_match(drhd->devices,
drhd->devices_cnt, dev))
return drhd;
}
return NULL;
}
int __init dmar_dev_scope_init(void)
{
struct dmar_drhd_unit *drhd;
int ret = -ENODEV;
for_each_drhd_unit(drhd) {
ret = dmar_parse_dev(drhd);
if (ret)
return ret;
}
#ifdef CONFIG_DMAR
{
struct dmar_rmrr_unit *rmrr;
for_each_rmrr_units(rmrr) {
ret = rmrr_parse_dev(rmrr);
if (ret)
return ret;
}
}
#endif
return ret;
}
int __init dmar_table_init(void)
{
static int dmar_table_initialized;
int ret;
if (dmar_table_initialized)
return 0;
dmar_table_initialized = 1;
ret = parse_dmar_table();
if (ret) {
printk(KERN_INFO PREFIX "parse DMAR table failure.\n");
if (ret != -ENODEV)
printk(KERN_INFO PREFIX "parse DMAR table failure.\n");
return ret;
}
......@@ -317,9 +419,14 @@ int __init dmar_table_init(void)
return -ENODEV;
}
#ifdef CONFIG_DMAR
if (list_empty(&dmar_rmrr_units))
printk(KERN_INFO PREFIX "No RMRR found\n");
#endif
#ifdef CONFIG_INTR_REMAP
parse_ioapics_under_ir();
#endif
return 0;
}
......@@ -341,3 +448,255 @@ int __init early_dmar_detect(void)
return (ACPI_SUCCESS(status) ? 1 : 0);
}
void __init detect_intel_iommu(void)
{
int ret;
ret = early_dmar_detect();
#ifdef CONFIG_DMAR
{
struct acpi_table_dmar *dmar;
/*
* for now we will disable dma-remapping when interrupt
* remapping is enabled.
* When support for queued invalidation for IOTLB invalidation
* is added, we will not need this any more.
*/
dmar = (struct acpi_table_dmar *) dmar_tbl;
if (ret && cpu_has_x2apic && dmar->flags & 0x1) {
printk(KERN_INFO
"Queued invalidation will be enabled to support "
"x2apic and Intr-remapping.\n");
printk(KERN_INFO
"Disabling IOMMU detection, because of missing "
"queued invalidation support for IOTLB "
"invalidation\n");
printk(KERN_INFO
"Use \"nox2apic\", if you want to use Intel "
" IOMMU for DMA-remapping and don't care about "
" x2apic support\n");
dmar_disabled = 1;
return;
}
if (ret && !no_iommu && !iommu_detected && !swiotlb &&
!dmar_disabled)
iommu_detected = 1;
}
#endif
}
int alloc_iommu(struct dmar_drhd_unit *drhd)
{
struct intel_iommu *iommu;
int map_size;
u32 ver;
static int iommu_allocated = 0;
iommu = kzalloc(sizeof(*iommu), GFP_KERNEL);
if (!iommu)
return -ENOMEM;
iommu->seq_id = iommu_allocated++;
iommu->reg = ioremap(drhd->reg_base_addr, PAGE_SIZE_4K);
if (!iommu->reg) {
printk(KERN_ERR "IOMMU: can't map the region\n");
goto error;
}
iommu->cap = dmar_readq(iommu->reg + DMAR_CAP_REG);
iommu->ecap = dmar_readq(iommu->reg + DMAR_ECAP_REG);
/* the registers might be more than one page */
map_size = max_t(int, ecap_max_iotlb_offset(iommu->ecap),
cap_max_fault_reg_offset(iommu->cap));
map_size = PAGE_ALIGN_4K(map_size);
if (map_size > PAGE_SIZE_4K) {
iounmap(iommu->reg);
iommu->reg = ioremap(drhd->reg_base_addr, map_size);
if (!iommu->reg) {
printk(KERN_ERR "IOMMU: can't map the region\n");
goto error;
}
}
ver = readl(iommu->reg + DMAR_VER_REG);
pr_debug("IOMMU %llx: ver %d:%d cap %llx ecap %llx\n",
drhd->reg_base_addr, DMAR_VER_MAJOR(ver), DMAR_VER_MINOR(ver),
iommu->cap, iommu->ecap);
spin_lock_init(&iommu->register_lock);
drhd->iommu = iommu;
return 0;
error:
kfree(iommu);
return -1;
}
void free_iommu(struct intel_iommu *iommu)
{
if (!iommu)
return;
#ifdef CONFIG_DMAR
free_dmar_iommu(iommu);
#endif
if (iommu->reg)
iounmap(iommu->reg);
kfree(iommu);
}
/*
* Reclaim all the submitted descriptors which have completed its work.
*/
static inline void reclaim_free_desc(struct q_inval *qi)
{
while (qi->desc_status[qi->free_tail] == QI_DONE) {
qi->desc_status[qi->free_tail] = QI_FREE;
qi->free_tail = (qi->free_tail + 1) % QI_LENGTH;
qi->free_cnt++;
}
}
/*
* Submit the queued invalidation descriptor to the remapping
* hardware unit and wait for its completion.
*/
void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu)
{
struct q_inval *qi = iommu->qi;
struct qi_desc *hw, wait_desc;
int wait_index, index;
unsigned long flags;
if (!qi)
return;
hw = qi->desc;
spin_lock(&qi->q_lock);
while (qi->free_cnt < 3) {
spin_unlock(&qi->q_lock);
cpu_relax();
spin_lock(&qi->q_lock);
}
index = qi->free_head;
wait_index = (index + 1) % QI_LENGTH;
qi->desc_status[index] = qi->desc_status[wait_index] = QI_IN_USE;
hw[index] = *desc;
wait_desc.low = QI_IWD_STATUS_DATA(2) | QI_IWD_STATUS_WRITE | QI_IWD_TYPE;
wait_desc.high = virt_to_phys(&qi->desc_status[wait_index]);
hw[wait_index] = wait_desc;
__iommu_flush_cache(iommu, &hw[index], sizeof(struct qi_desc));
__iommu_flush_cache(iommu, &hw[wait_index], sizeof(struct qi_desc));
qi->free_head = (qi->free_head + 2) % QI_LENGTH;
qi->free_cnt -= 2;
spin_lock_irqsave(&iommu->register_lock, flags);
/*
* update the HW tail register indicating the presence of
* new descriptors.
*/
writel(qi->free_head << 4, iommu->reg + DMAR_IQT_REG);
spin_unlock_irqrestore(&iommu->register_lock, flags);
while (qi->desc_status[wait_index] != QI_DONE) {
spin_unlock(&qi->q_lock);
cpu_relax();
spin_lock(&qi->q_lock);
}
qi->desc_status[index] = QI_DONE;
reclaim_free_desc(qi);
spin_unlock(&qi->q_lock);
}
/*
* Flush the global interrupt entry cache.
*/
void qi_global_iec(struct intel_iommu *iommu)
{
struct qi_desc desc;
desc.low = QI_IEC_TYPE;
desc.high = 0;
qi_submit_sync(&desc, iommu);
}
/*
* Enable Queued Invalidation interface. This is a must to support
* interrupt-remapping. Also used by DMA-remapping, which replaces
* register based IOTLB invalidation.
*/
int dmar_enable_qi(struct intel_iommu *iommu)
{
u32 cmd, sts;
unsigned long flags;
struct q_inval *qi;
if (!ecap_qis(iommu->ecap))
return -ENOENT;
/*
* queued invalidation is already setup and enabled.
*/
if (iommu->qi)
return 0;
iommu->qi = kmalloc(sizeof(*qi), GFP_KERNEL);
if (!iommu->qi)
return -ENOMEM;
qi = iommu->qi;
qi->desc = (void *)(get_zeroed_page(GFP_KERNEL));
if (!qi->desc) {
kfree(qi);
iommu->qi = 0;
return -ENOMEM;
}
qi->desc_status = kmalloc(QI_LENGTH * sizeof(int), GFP_KERNEL);
if (!qi->desc_status) {
free_page((unsigned long) qi->desc);
kfree(qi);
iommu->qi = 0;
return -ENOMEM;
}
qi->free_head = qi->free_tail = 0;
qi->free_cnt = QI_LENGTH;
spin_lock_init(&qi->q_lock);
spin_lock_irqsave(&iommu->register_lock, flags);
/* write zero to the tail reg */
writel(0, iommu->reg + DMAR_IQT_REG);
dmar_writeq(iommu->reg + DMAR_IQA_REG, virt_to_phys(qi->desc));
cmd = iommu->gcmd | DMA_GCMD_QIE;
iommu->gcmd |= DMA_GCMD_QIE;
writel(cmd, iommu->reg + DMAR_GCMD_REG);
/* Make sure hardware complete it */
IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG, readl, (sts & DMA_GSTS_QIES), sts);
spin_unlock_irqrestore(&iommu->register_lock, flags);
return 0;
}
drivers/pci/intel-iommu.c
View file @ d8470596
......@@ -49,8 +49,6 @@
#define DEFAULT_DOMAIN_ADDRESS_WIDTH 48
#define DMAR_OPERATION_TIMEOUT ((cycles_t) tsc_khz*10*1000) /* 10sec */
#define DOMAIN_MAX_ADDR(gaw) ((((u64)1) << gaw) - 1)
......@@ -58,8 +56,6 @@ static void flush_unmaps_timeout(unsigned long data);
DEFINE_TIMER(unmap_timer, flush_unmaps_timeout, 0, 0);
static struct intel_iommu *g_iommus;
#define HIGH_WATER_MARK 250
struct deferred_flush_tables {
int next;
......@@ -185,13 +181,6 @@ void free_iova_mem(struct iova *iova)
kmem_cache_free(iommu_iova_cache, iova);
}
static inline void __iommu_flush_cache(
struct intel_iommu *iommu, void *addr, int size)
{
if (!ecap_coherent(iommu->ecap))
clflush_cache_range(addr, size);
}
/* Gets context entry for a given bus and devfn */
static struct context_entry * device_to_context_entry(struct intel_iommu *iommu,
u8 bus, u8 devfn)
......@@ -488,19 +477,6 @@ static int iommu_alloc_root_entry(struct intel_iommu *iommu)
return 0;
}
#define IOMMU_WAIT_OP(iommu, offset, op, cond, sts) \
{\
cycles_t start_time = get_cycles();\
while (1) {\
sts = op (iommu->reg + offset);\
if (cond)\
break;\
if (DMAR_OPERATION_TIMEOUT < (get_cycles() - start_time))\
panic("DMAR hardware is malfunctioning\n");\
cpu_relax();\
}\
}
static void iommu_set_root_entry(struct intel_iommu *iommu)
{
void *addr;
......@@ -990,6 +966,8 @@ static int iommu_init_domains(struct intel_iommu *iommu)
return -ENOMEM;
}
spin_lock_init(&iommu->lock);
/*
* if Caching mode is set, then invalid translations are tagged
* with domainid 0. Hence we need to pre-allocate it.
......@@ -998,62 +976,15 @@ static int iommu_init_domains(struct intel_iommu *iommu)
set_bit(0, iommu->domain_ids);
return 0;
}
static struct intel_iommu *alloc_iommu(struct intel_iommu *iommu,
struct dmar_drhd_unit *drhd)
{
int ret;
int map_size;
u32 ver;
iommu->reg = ioremap(drhd->reg_base_addr, PAGE_SIZE_4K);
if (!iommu->reg) {
printk(KERN_ERR "IOMMU: can't map the region\n");
goto error;
}
iommu->cap = dmar_readq(iommu->reg + DMAR_CAP_REG);
iommu->ecap = dmar_readq(iommu->reg + DMAR_ECAP_REG);
/* the registers might be more than one page */
map_size = max_t(int, ecap_max_iotlb_offset(iommu->ecap),
cap_max_fault_reg_offset(iommu->cap));
map_size = PAGE_ALIGN_4K(map_size);
if (map_size > PAGE_SIZE_4K) {
iounmap(iommu->reg);
iommu->reg = ioremap(drhd->reg_base_addr, map_size);
if (!iommu->reg) {
printk(KERN_ERR "IOMMU: can't map the region\n");
goto error;
}
}
ver = readl(iommu->reg + DMAR_VER_REG);
pr_debug("IOMMU %llx: ver %d:%d cap %llx ecap %llx\n",
drhd->reg_base_addr, DMAR_VER_MAJOR(ver), DMAR_VER_MINOR(ver),
iommu->cap, iommu->ecap);
ret = iommu_init_domains(iommu);
if (ret)
goto error_unmap;
spin_lock_init(&iommu->lock);
spin_lock_init(&iommu->register_lock);
drhd->iommu = iommu;
return iommu;
error_unmap:
iounmap(iommu->reg);
error:
kfree(iommu);
return NULL;
}
static void domain_exit(struct dmar_domain *domain);
static void free_iommu(struct intel_iommu *iommu)
void free_dmar_iommu(struct intel_iommu *iommu)
{
struct dmar_domain *domain;
int i;
if (!iommu)
return;
i = find_first_bit(iommu->domain_ids, cap_ndoms(iommu->cap));
for (; i < cap_ndoms(iommu->cap); ) {
domain = iommu->domains[i];
......@@ -1078,10 +1009,6 @@ static void free_iommu(struct intel_iommu *iommu)
/* free context mapping */
free_context_table(iommu);
if (iommu->reg)
iounmap(iommu->reg);
kfree(iommu);
}
static struct dmar_domain * iommu_alloc_domain(struct intel_iommu *iommu)
......@@ -1426,37 +1353,6 @@ find_domain(struct pci_dev *pdev)
return NULL;
}
static int dmar_pci_device_match(struct pci_dev *devices[], int cnt,
struct pci_dev *dev)
{
int index;
while (dev) {
for (index = 0; index < cnt; index++)
if (dev == devices[index])
return 1;
/* Check our parent */
dev = dev->bus->self;
}
return 0;
}
static struct dmar_drhd_unit *
dmar_find_matched_drhd_unit(struct pci_dev *dev)
{
struct dmar_drhd_unit *drhd = NULL;
list_for_each_entry(drhd, &dmar_drhd_units, list) {
if (drhd->include_all || dmar_pci_device_match(drhd->devices,
drhd->devices_cnt, dev))
return drhd;
}
return NULL;
}
/* domain is initialized */
static struct dmar_domain *get_domain_for_dev(struct pci_dev *pdev, int gaw)
{
......@@ -1729,8 +1625,6 @@ int __init init_dmars(void)
* endfor
*/
for_each_drhd_unit(drhd) {
if (drhd->ignored)
continue;
g_num_of_iommus++;
/*
* lock not needed as this is only incremented in the single
......@@ -1739,12 +1633,6 @@ int __init init_dmars(void)
*/
}
g_iommus = kzalloc(g_num_of_iommus * sizeof(*iommu), GFP_KERNEL);
if (!g_iommus) {
ret = -ENOMEM;
goto error;
}
deferred_flush = kzalloc(g_num_of_iommus *
sizeof(struct deferred_flush_tables), GFP_KERNEL);
if (!deferred_flush) {
......@@ -1752,16 +1640,15 @@ int __init init_dmars(void)
goto error;
}
i = 0;
for_each_drhd_unit(drhd) {
if (drhd->ignored)
continue;
iommu = alloc_iommu(&g_iommus[i], drhd);
i++;
if (!iommu) {
ret = -ENOMEM;
iommu = drhd->iommu;
ret = iommu_init_domains(iommu);
if (ret)
goto error;
}
/*
* TBD:
......@@ -1845,7 +1732,6 @@ int __init init_dmars(void)
iommu = drhd->iommu;
free_iommu(iommu);
}
kfree(g_iommus);
return ret;
}
......@@ -2002,7 +1888,10 @@ static void flush_unmaps(void)
/* just flush them all */
for (i = 0; i < g_num_of_iommus; i++) {
if (deferred_flush[i].next) {
iommu_flush_iotlb_global(&g_iommus[i], 0);
struct intel_iommu *iommu =
deferred_flush[i].domain[0]->iommu;
iommu_flush_iotlb_global(iommu, 0);
for (j = 0; j < deferred_flush[i].next; j++) {
__free_iova(&deferred_flush[i].domain[j]->iovad,
deferred_flush[i].iova[j]);
......@@ -2032,7 +1921,8 @@ static void add_unmap(struct dmar_domain *dom, struct iova *iova)
if (list_size == HIGH_WATER_MARK)
flush_unmaps();
iommu_id = dom->iommu - g_iommus;
iommu_id = dom->iommu->seq_id;
next = deferred_flush[iommu_id].next;
deferred_flush[iommu_id].domain[next] = dom;
deferred_flush[iommu_id].iova[next] = iova;
......@@ -2348,38 +2238,6 @@ static void __init iommu_exit_mempool(void)
}
static int blacklist_iommu(const struct dmi_system_id *id)
{
printk(KERN_INFO "%s detected; disabling IOMMU\n",
id->ident);
dmar_disabled = 1;
return 0;
}
static struct dmi_system_id __initdata intel_iommu_dmi_table[] = {
{ /* Some DG33BU BIOS revisions advertised non-existent VT-d */
.callback = blacklist_iommu,
.ident = "Intel DG33BU",
{ DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"),
DMI_MATCH(DMI_BOARD_NAME, "DG33BU"),
}
},
{ }
};
void __init detect_intel_iommu(void)
{
if (swiotlb || no_iommu || iommu_detected || dmar_disabled)
return;
if (early_dmar_detect()) {
dmi_check_system(intel_iommu_dmi_table);
if (dmar_disabled)
return;
iommu_detected = 1;
}
}
static void __init init_no_remapping_devices(void)
{
struct dmar_drhd_unit *drhd;
......@@ -2426,12 +2284,19 @@ int __init intel_iommu_init(void)
{
int ret = 0;
if (no_iommu || swiotlb || dmar_disabled)
return -ENODEV;
if (dmar_table_init())
return -ENODEV;
if (dmar_dev_scope_init())
return -ENODEV;
/*
* Check the need for DMA-remapping initialization now.
* Above initialization will also be used by Interrupt-remapping.
*/
if (no_iommu || swiotlb || dmar_disabled)
return -ENODEV;
iommu_init_mempool();
dmar_init_reserved_ranges();
......
drivers/pci/intel-iommu.h
View file @ d8470596
......@@ -27,19 +27,8 @@
#include <linux/sysdev.h>
#include "iova.h"
#include <linux/io.h>
/*
* We need a fixed PAGE_SIZE of 4K irrespective of
* arch PAGE_SIZE for IOMMU page tables.
*/
#define PAGE_SHIFT_4K (12)
#define PAGE_SIZE_4K (1UL << PAGE_SHIFT_4K)
#define PAGE_MASK_4K (((u64)-1) << PAGE_SHIFT_4K)
#define PAGE_ALIGN_4K(addr) (((addr) + PAGE_SIZE_4K - 1) & PAGE_MASK_4K)
#define IOVA_PFN(addr) ((addr) >> PAGE_SHIFT_4K)
#define DMA_32BIT_PFN IOVA_PFN(DMA_32BIT_MASK)
#define DMA_64BIT_PFN IOVA_PFN(DMA_64BIT_MASK)
#include <asm/cacheflush.h>
#include "dma_remapping.h"
/*
* Intel IOMMU register specification per version 1.0 public spec.
......@@ -63,6 +52,11 @@
#define DMAR_PLMLIMIT_REG 0x6c /* PMRR low limit */
#define DMAR_PHMBASE_REG 0x70 /* pmrr high base addr */
#define DMAR_PHMLIMIT_REG 0x78 /* pmrr high limit */
#define DMAR_IQH_REG 0x80 /* Invalidation queue head register */
#define DMAR_IQT_REG 0x88 /* Invalidation queue tail register */
#define DMAR_IQA_REG 0x90 /* Invalidation queue addr register */
#define DMAR_ICS_REG 0x98 /* Invalidation complete status register */
#define DMAR_IRTA_REG 0xb8 /* Interrupt remapping table addr register */
#define OFFSET_STRIDE (9)
/*
......@@ -126,6 +120,10 @@ static inline void dmar_writeq(void __iomem *addr, u64 val)
#define ecap_max_iotlb_offset(e) \
(ecap_iotlb_offset(e) + ecap_niotlb_iunits(e) * 16)
#define ecap_coherent(e) ((e) & 0x1)
#define ecap_qis(e) ((e) & 0x2)
#define ecap_eim_support(e) ((e >> 4) & 0x1)
#define ecap_ir_support(e) ((e >> 3) & 0x1)
#define ecap_max_handle_mask(e) ((e >> 20) & 0xf)
/* IOTLB_REG */
......@@ -141,6 +139,17 @@ static inline void dmar_writeq(void __iomem *addr, u64 val)
#define DMA_TLB_IH_NONLEAF (((u64)1) << 6)
#define DMA_TLB_MAX_SIZE (0x3f)
/* INVALID_DESC */
#define DMA_ID_TLB_GLOBAL_FLUSH (((u64)1) << 3)
#define DMA_ID_TLB_DSI_FLUSH (((u64)2) << 3)
#define DMA_ID_TLB_PSI_FLUSH (((u64)3) << 3)
#define DMA_ID_TLB_READ_DRAIN (((u64)1) << 7)
#define DMA_ID_TLB_WRITE_DRAIN (((u64)1) << 6)
#define DMA_ID_TLB_DID(id) (((u64)((id & 0xffff) << 16)))
#define DMA_ID_TLB_IH_NONLEAF (((u64)1) << 6)
#define DMA_ID_TLB_ADDR(addr) (addr)
#define DMA_ID_TLB_ADDR_MASK(mask) (mask)
/* PMEN_REG */
#define DMA_PMEN_EPM (((u32)1)<<31)
#define DMA_PMEN_PRS (((u32)1)<<0)
......@@ -151,6 +160,9 @@ static inline void dmar_writeq(void __iomem *addr, u64 val)
#define DMA_GCMD_SFL (((u32)1) << 29)
#define DMA_GCMD_EAFL (((u32)1) << 28)
#define DMA_GCMD_WBF (((u32)1) << 27)
#define DMA_GCMD_QIE (((u32)1) << 26)
#define DMA_GCMD_SIRTP (((u32)1) << 24)
#define DMA_GCMD_IRE (((u32) 1) << 25)
/* GSTS_REG */
#define DMA_GSTS_TES (((u32)1) << 31)
......@@ -158,6 +170,9 @@ static inline void dmar_writeq(void __iomem *addr, u64 val)
#define DMA_GSTS_FLS (((u32)1) << 29)
#define DMA_GSTS_AFLS (((u32)1) << 28)
#define DMA_GSTS_WBFS (((u32)1) << 27)
#define DMA_GSTS_QIES (((u32)1) << 26)
#define DMA_GSTS_IRTPS (((u32)1) << 24)
#define DMA_GSTS_IRES (((u32)1) << 25)
/* CCMD_REG */
#define DMA_CCMD_ICC (((u64)1) << 63)
......@@ -187,158 +202,106 @@ static inline void dmar_writeq(void __iomem *addr, u64 val)
#define dma_frcd_source_id(c) (c & 0xffff)
#define dma_frcd_page_addr(d) (d & (((u64)-1) << 12)) /* low 64 bit */
/*
* 0: Present
* 1-11: Reserved
* 12-63: Context Ptr (12 - (haw-1))
* 64-127: Reserved
*/
struct root_entry {
u64 val;
u64 rsvd1;
};
#define ROOT_ENTRY_NR (PAGE_SIZE_4K/sizeof(struct root_entry))
static inline bool root_present(struct root_entry *root)
{
return (root->val & 1);
}
static inline void set_root_present(struct root_entry *root)
{
root->val |= 1;
}
static inline void set_root_value(struct root_entry *root, unsigned long value)
{
root->val |= value & PAGE_MASK_4K;
#define DMAR_OPERATION_TIMEOUT ((cycles_t) tsc_khz*10*1000) /* 10sec */
#define IOMMU_WAIT_OP(iommu, offset, op, cond, sts) \
{\
cycles_t start_time = get_cycles();\
while (1) {\
sts = op (iommu->reg + offset);\
if (cond)\
break;\
if (DMAR_OPERATION_TIMEOUT < (get_cycles() - start_time))\
panic("DMAR hardware is malfunctioning\n");\
cpu_relax();\
}\
}
struct context_entry;
static inline struct context_entry *
get_context_addr_from_root(struct root_entry *root)
{
return (struct context_entry *)
(root_present(root)?phys_to_virt(
root->val & PAGE_MASK_4K):
NULL);
}
/*
* low 64 bits:
* 0: present
* 1: fault processing disable
* 2-3: translation type
* 12-63: address space root
* high 64 bits:
* 0-2: address width
* 3-6: aval
* 8-23: domain id
*/
struct context_entry {
u64 lo;
u64 hi;
};
#define context_present(c) ((c).lo & 1)
#define context_fault_disable(c) (((c).lo >> 1) & 1)
#define context_translation_type(c) (((c).lo >> 2) & 3)
#define context_address_root(c) ((c).lo & PAGE_MASK_4K)
#define context_address_width(c) ((c).hi & 7)
#define context_domain_id(c) (((c).hi >> 8) & ((1 << 16) - 1))
#define context_set_present(c) do {(c).lo |= 1;} while (0)
#define context_set_fault_enable(c) \
do {(c).lo &= (((u64)-1) << 2) | 1;} while (0)
#define context_set_translation_type(c, val) \
do { \
(c).lo &= (((u64)-1) << 4) | 3; \
(c).lo |= ((val) & 3) << 2; \
} while (0)
#define CONTEXT_TT_MULTI_LEVEL 0
#define context_set_address_root(c, val) \
do {(c).lo |= (val) & PAGE_MASK_4K;} while (0)
#define context_set_address_width(c, val) do {(c).hi |= (val) & 7;} while (0)
#define context_set_domain_id(c, val) \
do {(c).hi |= ((val) & ((1 << 16) - 1)) << 8;} while (0)
#define context_clear_entry(c) do {(c).lo = 0; (c).hi = 0;} while (0)
#define QI_LENGTH 256 /* queue length */
/*
* 0: readable
* 1: writable
* 2-6: reserved
* 7: super page
* 8-11: available
* 12-63: Host physcial address
*/
struct dma_pte {
u64 val;
enum {
QI_FREE,
QI_IN_USE,
QI_DONE
};
#define dma_clear_pte(p) do {(p).val = 0;} while (0)
#define DMA_PTE_READ (1)
#define DMA_PTE_WRITE (2)
#define dma_set_pte_readable(p) do {(p).val |= DMA_PTE_READ;} while (0)
#define dma_set_pte_writable(p) do {(p).val |= DMA_PTE_WRITE;} while (0)
#define dma_set_pte_prot(p, prot) \
do {(p).val = ((p).val & ~3) | ((prot) & 3); } while (0)
#define dma_pte_addr(p) ((p).val & PAGE_MASK_4K)
#define dma_set_pte_addr(p, addr) do {\
(p).val |= ((addr) & PAGE_MASK_4K); } while (0)
#define dma_pte_present(p) (((p).val & 3) != 0)
#define QI_CC_TYPE 0x1
#define QI_IOTLB_TYPE 0x2
#define QI_DIOTLB_TYPE 0x3
#define QI_IEC_TYPE 0x4
#define QI_IWD_TYPE 0x5
struct intel_iommu;
#define QI_IEC_SELECTIVE (((u64)1) << 4)
#define QI_IEC_IIDEX(idx) (((u64)(idx & 0xffff) << 32))
#define QI_IEC_IM(m) (((u64)(m & 0x1f) << 27))
struct dmar_domain {
int id; /* domain id */
struct intel_iommu *iommu; /* back pointer to owning iommu */
#define QI_IWD_STATUS_DATA(d) (((u64)d) << 32)
#define QI_IWD_STATUS_WRITE (((u64)1) << 5)
struct list_head devices; /* all devices' list */
struct iova_domain iovad; /* iova's that belong to this domain */
struct qi_desc {
u64 low, high;
};
struct dma_pte *pgd; /* virtual address */
spinlock_t mapping_lock; /* page table lock */
int gaw; /* max guest address width */
struct q_inval {
spinlock_t q_lock;
struct qi_desc *desc; /* invalidation queue */
int *desc_status; /* desc status */
int free_head; /* first free entry */
int free_tail; /* last free entry */
int free_cnt;
};
/* adjusted guest address width, 0 is level 2 30-bit */
int agaw;
#ifdef CONFIG_INTR_REMAP
/* 1MB - maximum possible interrupt remapping table size */
#define INTR_REMAP_PAGE_ORDER 8
#define INTR_REMAP_TABLE_REG_SIZE 0xf
#define DOMAIN_FLAG_MULTIPLE_DEVICES 1
int flags;
};
#define INTR_REMAP_TABLE_ENTRIES 65536
/* PCI domain-device relationship */
struct device_domain_info {
struct list_head link; /* link to domain siblings */
struct list_head global; /* link to global list */
u8 bus; /* PCI bus numer */
u8 devfn; /* PCI devfn number */
struct pci_dev *dev; /* it's NULL for PCIE-to-PCI bridge */
struct dmar_domain *domain; /* pointer to domain */
struct ir_table {
struct irte *base;
};
extern int init_dmars(void);
#endif
struct intel_iommu {
void __iomem *reg; /* Pointer to hardware regs, virtual addr */
u64 cap;
u64 ecap;
unsigned long *domain_ids; /* bitmap of domains */
struct dmar_domain **domains; /* ptr to domains */
int seg;
u32 gcmd; /* Holds TE, EAFL. Don't need SRTP, SFL, WBF */
spinlock_t lock; /* protect context, domain ids */
spinlock_t register_lock; /* protect register handling */
int seq_id; /* sequence id of the iommu */
#ifdef CONFIG_DMAR
unsigned long *domain_ids; /* bitmap of domains */
struct dmar_domain **domains; /* ptr to domains */
spinlock_t lock; /* protect context, domain ids */
struct root_entry *root_entry; /* virtual address */
unsigned int irq;
unsigned char name[7]; /* Device Name */
struct msi_msg saved_msg;
struct sys_device sysdev;
#endif
struct q_inval *qi; /* Queued invalidation info */
#ifdef CONFIG_INTR_REMAP
struct ir_table *ir_table; /* Interrupt remapping info */
#endif
};
#ifndef CONFIG_DMAR_GFX_WA
static inline void iommu_prepare_gfx_mapping(void)
static inline void __iommu_flush_cache(
struct intel_iommu *iommu, void *addr, int size)
{
return;
if (!ecap_coherent(iommu->ecap))
clflush_cache_range(addr, size);
}
#endif /* !CONFIG_DMAR_GFX_WA */
extern struct dmar_drhd_unit * dmar_find_matched_drhd_unit(struct pci_dev *dev);
extern int alloc_iommu(struct dmar_drhd_unit *drhd);
extern void free_iommu(struct intel_iommu *iommu);
extern int dmar_enable_qi(struct intel_iommu *iommu);
extern void qi_global_iec(struct intel_iommu *iommu);
extern void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu);
#endif
drivers/pci/intr_remapping.c 0 → 100644
View file @ d8470596
#include <linux/dmar.h>
#include <linux/spinlock.h>
#include <linux/jiffies.h>
#include <linux/pci.h>
#include <linux/irq.h>
#include <asm/io_apic.h>
#include "intel-iommu.h"
#include "intr_remapping.h"
static struct ioapic_scope ir_ioapic[MAX_IO_APICS];
static int ir_ioapic_num;
int intr_remapping_enabled;
static struct {
struct intel_iommu *iommu;
u16 irte_index;
u16 sub_handle;
u8 irte_mask;
} irq_2_iommu[NR_IRQS];
static DEFINE_SPINLOCK(irq_2_ir_lock);
int irq_remapped(int irq)
{
if (irq > NR_IRQS)
return 0;
if (!irq_2_iommu[irq].iommu)
return 0;
return 1;
}
int get_irte(int irq, struct irte *entry)
{
int index;
if (!entry || irq > NR_IRQS)
return -1;
spin_lock(&irq_2_ir_lock);
if (!irq_2_iommu[irq].iommu) {
spin_unlock(&irq_2_ir_lock);
return -1;
}
index = irq_2_iommu[irq].irte_index + irq_2_iommu[irq].sub_handle;
*entry = *(irq_2_iommu[irq].iommu->ir_table->base + index);
spin_unlock(&irq_2_ir_lock);
return 0;
}
int alloc_irte(struct intel_iommu *iommu, int irq, u16 count)
{
struct ir_table *table = iommu->ir_table;
u16 index, start_index;
unsigned int mask = 0;
int i;
if (!count)
return -1;
/*
* start the IRTE search from index 0.
*/
index = start_index = 0;
if (count > 1) {
count = __roundup_pow_of_two(count);
mask = ilog2(count);
}
if (mask > ecap_max_handle_mask(iommu->ecap)) {
printk(KERN_ERR
"Requested mask %x exceeds the max invalidation handle"
" mask value %Lx\n", mask,
ecap_max_handle_mask(iommu->ecap));
return -1;
}
spin_lock(&irq_2_ir_lock);
do {
for (i = index; i < index + count; i++)
if (table->base[i].present)
break;
/* empty index found */
if (i == index + count)
break;
index = (index + count) % INTR_REMAP_TABLE_ENTRIES;
if (index == start_index) {
spin_unlock(&irq_2_ir_lock);
printk(KERN_ERR "can't allocate an IRTE\n");
return -1;
}
} while (1);
for (i = index; i < index + count; i++)
table->base[i].present = 1;
irq_2_iommu[irq].iommu = iommu;
irq_2_iommu[irq].irte_index = index;
irq_2_iommu[irq].sub_handle = 0;
irq_2_iommu[irq].irte_mask = mask;
spin_unlock(&irq_2_ir_lock);
return index;
}
static void qi_flush_iec(struct intel_iommu *iommu, int index, int mask)
{
struct qi_desc desc;
desc.low = QI_IEC_IIDEX(index) | QI_IEC_TYPE | QI_IEC_IM(mask)
| QI_IEC_SELECTIVE;
desc.high = 0;
qi_submit_sync(&desc, iommu);
}
int map_irq_to_irte_handle(int irq, u16 *sub_handle)
{
int index;
spin_lock(&irq_2_ir_lock);
if (irq >= NR_IRQS || !irq_2_iommu[irq].iommu) {
spin_unlock(&irq_2_ir_lock);
return -1;
}
*sub_handle = irq_2_iommu[irq].sub_handle;
index = irq_2_iommu[irq].irte_index;
spin_unlock(&irq_2_ir_lock);
return index;
}
int set_irte_irq(int irq, struct intel_iommu *iommu, u16 index, u16 subhandle)
{
spin_lock(&irq_2_ir_lock);
if (irq >= NR_IRQS || irq_2_iommu[irq].iommu) {
spin_unlock(&irq_2_ir_lock);
return -1;
}
irq_2_iommu[irq].iommu = iommu;
irq_2_iommu[irq].irte_index = index;
irq_2_iommu[irq].sub_handle = subhandle;
irq_2_iommu[irq].irte_mask = 0;
spin_unlock(&irq_2_ir_lock);
return 0;
}
int clear_irte_irq(int irq, struct intel_iommu *iommu, u16 index)
{
spin_lock(&irq_2_ir_lock);
if (irq >= NR_IRQS || !irq_2_iommu[irq].iommu) {
spin_unlock(&irq_2_ir_lock);
return -1;
}
irq_2_iommu[irq].iommu = NULL;
irq_2_iommu[irq].irte_index = 0;
irq_2_iommu[irq].sub_handle = 0;
irq_2_iommu[irq].irte_mask = 0;
spin_unlock(&irq_2_ir_lock);
return 0;
}
int modify_irte(int irq, struct irte *irte_modified)
{
int index;
struct irte *irte;
struct intel_iommu *iommu;
spin_lock(&irq_2_ir_lock);
if (irq >= NR_IRQS || !irq_2_iommu[irq].iommu) {
spin_unlock(&irq_2_ir_lock);
return -1;
}
iommu = irq_2_iommu[irq].iommu;
index = irq_2_iommu[irq].irte_index + irq_2_iommu[irq].sub_handle;
irte = &iommu->ir_table->base[index];
set_64bit((unsigned long *)irte, irte_modified->low | (1 << 1));
__iommu_flush_cache(iommu, irte, sizeof(*irte));
qi_flush_iec(iommu, index, 0);
spin_unlock(&irq_2_ir_lock);
return 0;
}
int flush_irte(int irq)
{
int index;
struct intel_iommu *iommu;
spin_lock(&irq_2_ir_lock);
if (irq >= NR_IRQS || !irq_2_iommu[irq].iommu) {
spin_unlock(&irq_2_ir_lock);
return -1;
}
iommu = irq_2_iommu[irq].iommu;
index = irq_2_iommu[irq].irte_index + irq_2_iommu[irq].sub_handle;
qi_flush_iec(iommu, index, irq_2_iommu[irq].irte_mask);
spin_unlock(&irq_2_ir_lock);
return 0;
}
struct intel_iommu *map_ioapic_to_ir(int apic)
{
int i;
for (i = 0; i < MAX_IO_APICS; i++)
if (ir_ioapic[i].id == apic)
return ir_ioapic[i].iommu;
return NULL;
}
struct intel_iommu *map_dev_to_ir(struct pci_dev *dev)
{
struct dmar_drhd_unit *drhd;
drhd = dmar_find_matched_drhd_unit(dev);
if (!drhd)
return NULL;
return drhd->iommu;
}
int free_irte(int irq)
{
int index, i;
struct irte *irte;
struct intel_iommu *iommu;
spin_lock(&irq_2_ir_lock);
if (irq >= NR_IRQS || !irq_2_iommu[irq].iommu) {
spin_unlock(&irq_2_ir_lock);
return -1;
}
iommu = irq_2_iommu[irq].iommu;
index = irq_2_iommu[irq].irte_index + irq_2_iommu[irq].sub_handle;
irte = &iommu->ir_table->base[index];
if (!irq_2_iommu[irq].sub_handle) {
for (i = 0; i < (1 << irq_2_iommu[irq].irte_mask); i++)
set_64bit((unsigned long *)irte, 0);
qi_flush_iec(iommu, index, irq_2_iommu[irq].irte_mask);
}
irq_2_iommu[irq].iommu = NULL;
irq_2_iommu[irq].irte_index = 0;
irq_2_iommu[irq].sub_handle = 0;
irq_2_iommu[irq].irte_mask = 0;
spin_unlock(&irq_2_ir_lock);
return 0;
}
static void iommu_set_intr_remapping(struct intel_iommu *iommu, int mode)
{
u64 addr;
u32 cmd, sts;
unsigned long flags;
addr = virt_to_phys((void *)iommu->ir_table->base);
spin_lock_irqsave(&iommu->register_lock, flags);
dmar_writeq(iommu->reg + DMAR_IRTA_REG,
(addr) | IR_X2APIC_MODE(mode) | INTR_REMAP_TABLE_REG_SIZE);
/* Set interrupt-remapping table pointer */
cmd = iommu->gcmd | DMA_GCMD_SIRTP;
writel(cmd, iommu->reg + DMAR_GCMD_REG);
IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG,
readl, (sts & DMA_GSTS_IRTPS), sts);
spin_unlock_irqrestore(&iommu->register_lock, flags);
/*
* global invalidation of interrupt entry cache before enabling
* interrupt-remapping.
*/
qi_global_iec(iommu);
spin_lock_irqsave(&iommu->register_lock, flags);
/* Enable interrupt-remapping */
cmd = iommu->gcmd | DMA_GCMD_IRE;
iommu->gcmd |= DMA_GCMD_IRE;
writel(cmd, iommu->reg + DMAR_GCMD_REG);
IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG,
readl, (sts & DMA_GSTS_IRES), sts);
spin_unlock_irqrestore(&iommu->register_lock, flags);
}
static int setup_intr_remapping(struct intel_iommu *iommu, int mode)
{
struct ir_table *ir_table;
struct page *pages;
ir_table = iommu->ir_table = kzalloc(sizeof(struct ir_table),
GFP_KERNEL);
if (!iommu->ir_table)
return -ENOMEM;
pages = alloc_pages(GFP_KERNEL | __GFP_ZERO, INTR_REMAP_PAGE_ORDER);
if (!pages) {
printk(KERN_ERR "failed to allocate pages of order %d\n",
INTR_REMAP_PAGE_ORDER);
kfree(iommu->ir_table);
return -ENOMEM;
}
ir_table->base = page_address(pages);
iommu_set_intr_remapping(iommu, mode);
return 0;
}
int __init enable_intr_remapping(int eim)
{
struct dmar_drhd_unit *drhd;
int setup = 0;
/*
* check for the Interrupt-remapping support
*/
for_each_drhd_unit(drhd) {
struct intel_iommu *iommu = drhd->iommu;
if (!ecap_ir_support(iommu->ecap))
continue;
if (eim && !ecap_eim_support(iommu->ecap)) {
printk(KERN_INFO "DRHD %Lx: EIM not supported by DRHD, "
" ecap %Lx\n", drhd->reg_base_addr, iommu->ecap);
return -1;
}
}
/*
* Enable queued invalidation for all the DRHD's.
*/
for_each_drhd_unit(drhd) {
int ret;
struct intel_iommu *iommu = drhd->iommu;
ret = dmar_enable_qi(iommu);
if (ret) {
printk(KERN_ERR "DRHD %Lx: failed to enable queued, "
" invalidation, ecap %Lx, ret %d\n",
drhd->reg_base_addr, iommu->ecap, ret);
return -1;
}
}
/*
* Setup Interrupt-remapping for all the DRHD's now.
*/
for_each_drhd_unit(drhd) {
struct intel_iommu *iommu = drhd->iommu;
if (!ecap_ir_support(iommu->ecap))
continue;
if (setup_intr_remapping(iommu, eim))
goto error;
setup = 1;
}
if (!setup)
goto error;
intr_remapping_enabled = 1;
return 0;
error:
/*
* handle error condition gracefully here!
*/
return -1;
}
static int ir_parse_ioapic_scope(struct acpi_dmar_header *header,
struct intel_iommu *iommu)
{
struct acpi_dmar_hardware_unit *drhd;
struct acpi_dmar_device_scope *scope;
void *start, *end;
drhd = (struct acpi_dmar_hardware_unit *)header;
start = (void *)(drhd + 1);
end = ((void *)drhd) + header->length;
while (start < end) {
scope = start;
if (scope->entry_type == ACPI_DMAR_SCOPE_TYPE_IOAPIC) {
if (ir_ioapic_num == MAX_IO_APICS) {
printk(KERN_WARNING "Exceeded Max IO APICS\n");
return -1;
}
printk(KERN_INFO "IOAPIC id %d under DRHD base"
" 0x%Lx\n", scope->enumeration_id,
drhd->address);
ir_ioapic[ir_ioapic_num].iommu = iommu;
ir_ioapic[ir_ioapic_num].id = scope->enumeration_id;
ir_ioapic_num++;
}
start += scope->length;
}
return 0;
}
/*
* Finds the assocaition between IOAPIC's and its Interrupt-remapping
* hardware unit.
*/
int __init parse_ioapics_under_ir(void)
{
struct dmar_drhd_unit *drhd;
int ir_supported = 0;
for_each_drhd_unit(drhd) {
struct intel_iommu *iommu = drhd->iommu;
if (ecap_ir_support(iommu->ecap)) {
if (ir_parse_ioapic_scope(drhd->hdr, iommu))
return -1;
ir_supported = 1;
}
}
if (ir_supported && ir_ioapic_num != nr_ioapics) {
printk(KERN_WARNING
"Not all IO-APIC's listed under remapping hardware\n");
return -1;
}
return ir_supported;
}
drivers/pci/intr_remapping.h 0 → 100644
View file @ d8470596
#include "intel-iommu.h"
struct ioapic_scope {
struct intel_iommu *iommu;
unsigned int id;
};
#define IR_X2APIC_MODE(mode) (mode ? (1 << 11) : 0)
include/asm-x86/apic.h
View file @ d8470596
......@@ -9,6 +9,8 @@
#include <asm/apicdef.h>
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/cpufeature.h>
#include <asm/msr.h>
#define ARCH_APICTIMER_STOPS_ON_C3 1
......@@ -47,8 +49,6 @@ extern int disable_apic;
#ifdef CONFIG_PARAVIRT
#include <asm/paravirt.h>
#else
#define apic_write native_apic_write
#define apic_read native_apic_read
#define setup_boot_clock setup_boot_APIC_clock
#define setup_secondary_clock setup_secondary_APIC_clock
#endif
......@@ -60,7 +60,7 @@ extern u64 xapic_icr_read(void);
extern void xapic_icr_write(u32, u32);
extern int setup_profiling_timer(unsigned int);
static inline void native_apic_write(unsigned long reg, u32 v)
static inline void native_apic_mem_write(u32 reg, u32 v)
{
volatile u32 *addr = (volatile u32 *)(APIC_BASE + reg);
......@@ -69,15 +69,68 @@ static inline void native_apic_write(unsigned long reg, u32 v)
ASM_OUTPUT2("0" (v), "m" (*addr)));
}
static inline u32 native_apic_read(unsigned long reg)
static inline u32 native_apic_mem_read(u32 reg)
{
return *((volatile u32 *)(APIC_BASE + reg));
}
extern void apic_wait_icr_idle(void);
extern u32 safe_apic_wait_icr_idle(void);
static inline void native_apic_msr_write(u32 reg, u32 v)
{
if (reg == APIC_DFR || reg == APIC_ID || reg == APIC_LDR ||
reg == APIC_LVR)
return;
wrmsr(APIC_BASE_MSR + (reg >> 4), v, 0);
}
static inline u32 native_apic_msr_read(u32 reg)
{
u32 low, high;
if (reg == APIC_DFR)
return -1;
rdmsr(APIC_BASE_MSR + (reg >> 4), low, high);
return low;
}
#ifndef CONFIG_X86_32
extern int x2apic, x2apic_preenabled;
extern void check_x2apic(void);
extern void enable_x2apic(void);
extern void enable_IR_x2apic(void);
extern void x2apic_icr_write(u32 low, u32 id);
#endif
struct apic_ops {
u32 (*read)(u32 reg);
void (*write)(u32 reg, u32 v);
u64 (*icr_read)(void);
void (*icr_write)(u32 low, u32 high);
void (*wait_icr_idle)(void);
u32 (*safe_wait_icr_idle)(void);
};
extern struct apic_ops *apic_ops;
#define apic_read (apic_ops->read)
#define apic_write (apic_ops->write)
#define apic_icr_read (apic_ops->icr_read)
#define apic_icr_write (apic_ops->icr_write)
#define apic_wait_icr_idle (apic_ops->wait_icr_idle)
#define safe_apic_wait_icr_idle (apic_ops->safe_wait_icr_idle)
extern int get_physical_broadcast(void);
#ifdef CONFIG_X86_64
static inline void ack_x2APIC_irq(void)
{
/* Docs say use 0 for future compatibility */
native_apic_msr_write(APIC_EOI, 0);
}
#endif
static inline void ack_APIC_irq(void)
{
/*
......
include/asm-x86/apicdef.h
View file @ d8470596
......@@ -105,6 +105,7 @@
#define APIC_TMICT 0x380
#define APIC_TMCCT 0x390
#define APIC_TDCR 0x3E0
#define APIC_SELF_IPI 0x3F0
#define APIC_TDR_DIV_TMBASE (1 << 2)
#define APIC_TDR_DIV_1 0xB
#define APIC_TDR_DIV_2 0x0
......@@ -128,6 +129,8 @@
#define APIC_EILVT3 0x530
#define APIC_BASE (fix_to_virt(FIX_APIC_BASE))
#define APIC_BASE_MSR 0x800
#define X2APIC_ENABLE (1UL << 10)
#ifdef CONFIG_X86_32
# define MAX_IO_APICS 64
......
include/asm-x86/arch_hooks.h
View file @ d8470596
......@@ -12,8 +12,6 @@
/* these aren't arch hooks, they are generic routines
* that can be used by the hooks */
extern void init_ISA_irqs(void);
extern void apic_intr_init(void);
extern void smp_intr_init(void);
extern irqreturn_t timer_interrupt(int irq, void *dev_id);
/* these are the defined hooks */
......
include/asm-x86/mach-bigsmp/mach_apic.h → include/asm-x86/bigsmp/apic.h
View file @ d8470596
#ifndef ASM_X86__MACH_BIGSMP__MACH_APIC_H
#define ASM_X86__MACH_BIGSMP__MACH_APIC_H
#ifndef __ASM_MACH_APIC_H
#define __ASM_MACH_APIC_H
#define xapic_phys_to_log_apicid(cpu) (per_cpu(x86_bios_cpu_apicid, cpu))
#define esr_disable (1)
......@@ -11,7 +11,7 @@ static inline int apic_id_registered(void)
/* Round robin the irqs amoung the online cpus */
static inline cpumask_t target_cpus(void)
{
{
static unsigned long cpu = NR_CPUS;
do {
if (cpu >= NR_CPUS)
......@@ -23,7 +23,7 @@ static inline cpumask_t target_cpus(void)
}
#undef APIC_DEST_LOGICAL
#define APIC_DEST_LOGICAL 0
#define APIC_DEST_LOGICAL 0
#define TARGET_CPUS (target_cpus())
#define APIC_DFR_VALUE (APIC_DFR_FLAT)
#define INT_DELIVERY_MODE (dest_Fixed)
......@@ -141,4 +141,4 @@ static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
return cpuid_apic >> index_msb;
}
#endif /* ASM_X86__MACH_BIGSMP__MACH_APIC_H */
#endif /* __ASM_MACH_APIC_H */
include/asm-x86/mach-bigsmp/mach_apicdef.h → include/asm-x86/bigsmp/apicdef.h
View file @ d8470596
#ifndef ASM_X86__MACH_BIGSMP__MACH_APICDEF_H
#define ASM_X86__MACH_BIGSMP__MACH_APICDEF_H
#ifndef __ASM_MACH_APICDEF_H
#define __ASM_MACH_APICDEF_H
#define APIC_ID_MASK (0xFF<<24)
static inline unsigned get_apic_id(unsigned long x)
{
static inline unsigned get_apic_id(unsigned long x)
{
return (((x)>>24)&0xFF);
}
}
#define GET_APIC_ID(x) get_apic_id(x)
#endif /* ASM_X86__MACH_BIGSMP__MACH_APICDEF_H */
#endif
include/asm-x86/mach-bigsmp/mach_ipi.h → include/asm-x86/bigsmp/ipi.h
View file @ d8470596
#ifndef ASM_X86__MACH_BIGSMP__MACH_IPI_H
#define ASM_X86__MACH_BIGSMP__MACH_IPI_H
#ifndef __ASM_MACH_IPI_H
#define __ASM_MACH_IPI_H
void send_IPI_mask_sequence(cpumask_t mask, int vector);
......@@ -22,4 +22,4 @@ static inline void send_IPI_all(int vector)
send_IPI_mask(cpu_online_map, vector);
}
#endif /* ASM_X86__MACH_BIGSMP__MACH_IPI_H */
#endif /* __ASM_MACH_IPI_H */
include/asm-x86/cpufeature.h
View file @ d8470596
......@@ -93,6 +93,7 @@
#define X86_FEATURE_CX16 (4*32+13) /* CMPXCHG16B */
#define X86_FEATURE_XTPR (4*32+14) /* Send Task Priority Messages */
#define X86_FEATURE_DCA (4*32+18) /* Direct Cache Access */
#define X86_FEATURE_X2APIC (4*32+21) /* x2APIC */
#define X86_FEATURE_XMM4_2 (4*32+20) /* Streaming SIMD Extensions-4.2 */
/* VIA/Cyrix/Centaur-defined CPU features, CPUID level 0xC0000001, word 5 */
......@@ -192,6 +193,7 @@ extern const char * const x86_power_flags[32];
#define cpu_has_gbpages boot_cpu_has(X86_FEATURE_GBPAGES)
#define cpu_has_arch_perfmon boot_cpu_has(X86_FEATURE_ARCH_PERFMON)
#define cpu_has_pat boot_cpu_has(X86_FEATURE_PAT)
#define cpu_has_x2apic boot_cpu_has(X86_FEATURE_X2APIC)
#define cpu_has_xmm4_2 boot_cpu_has(X86_FEATURE_XMM4_2)
#if defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_64)
......
include/asm-x86/mach-es7000/mach_apic.h → include/asm-x86/es7000/apic.h
View file @ d8470596
#ifndef ASM_X86__MACH_ES7000__MACH_APIC_H
#define ASM_X86__MACH_ES7000__MACH_APIC_H
#ifndef __ASM_ES7000_APIC_H
#define __ASM_ES7000_APIC_H
#define xapic_phys_to_log_apicid(cpu) per_cpu(x86_bios_cpu_apicid, cpu)
#define esr_disable (1)
......@@ -10,7 +10,7 @@ static inline int apic_id_registered(void)
}
static inline cpumask_t target_cpus(void)
{
{
#if defined CONFIG_ES7000_CLUSTERED_APIC
return CPU_MASK_ALL;
#else
......@@ -23,24 +23,24 @@ static inline cpumask_t target_cpus(void)
#define APIC_DFR_VALUE (APIC_DFR_CLUSTER)
#define INT_DELIVERY_MODE (dest_LowestPrio)
#define INT_DEST_MODE (1) /* logical delivery broadcast to all procs */
#define NO_BALANCE_IRQ (1)
#define NO_BALANCE_IRQ (1)
#undef WAKE_SECONDARY_VIA_INIT
#define WAKE_SECONDARY_VIA_MIP
#else
#define APIC_DFR_VALUE (APIC_DFR_FLAT)
#define INT_DELIVERY_MODE (dest_Fixed)
#define INT_DEST_MODE (0) /* phys delivery to target procs */
#define NO_BALANCE_IRQ (0)
#define NO_BALANCE_IRQ (0)
#undef APIC_DEST_LOGICAL
#define APIC_DEST_LOGICAL 0x0
#define WAKE_SECONDARY_VIA_INIT
#endif
static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
{
{
return 0;
}
static inline unsigned long check_apicid_present(int bit)
}
static inline unsigned long check_apicid_present(int bit)
{
return physid_isset(bit, phys_cpu_present_map);
}
......@@ -80,7 +80,7 @@ static inline void setup_apic_routing(void)
{
int apic = per_cpu(x86_bios_cpu_apicid, smp_processor_id());
printk("Enabling APIC mode: %s. Using %d I/O APICs, target cpus %lx\n",
(apic_version[apic] == 0x14) ?
(apic_version[apic] == 0x14) ?
"Physical Cluster" : "Logical Cluster", nr_ioapics, cpus_addr(TARGET_CPUS)[0]);
}
......@@ -141,7 +141,7 @@ static inline void setup_portio_remap(void)
extern unsigned int boot_cpu_physical_apicid;
static inline int check_phys_apicid_present(int cpu_physical_apicid)
{
boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
boot_cpu_physical_apicid = read_apic_id();
return (1);
}
......@@ -150,7 +150,7 @@ static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
int num_bits_set;
int cpus_found = 0;
int cpu;
int apicid;
int apicid;
num_bits_set = cpus_weight(cpumask);
/* Return id to all */
......@@ -160,16 +160,16 @@ static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
#else
return cpu_to_logical_apicid(0);
#endif
/*
* The cpus in the mask must all be on the apic cluster. If are not
* on the same apicid cluster return default value of TARGET_CPUS.
/*
* The cpus in the mask must all be on the apic cluster. If are not
* on the same apicid cluster return default value of TARGET_CPUS.
*/
cpu = first_cpu(cpumask);
apicid = cpu_to_logical_apicid(cpu);
while (cpus_found < num_bits_set) {
if (cpu_isset(cpu, cpumask)) {
int new_apicid = cpu_to_logical_apicid(cpu);
if (apicid_cluster(apicid) !=
if (apicid_cluster(apicid) !=
apicid_cluster(new_apicid)){
printk ("%s: Not a valid mask!\n",__FUNCTION__);
#if defined CONFIG_ES7000_CLUSTERED_APIC
......@@ -191,4 +191,4 @@ static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
return cpuid_apic >> index_msb;
}
#endif /* ASM_X86__MACH_ES7000__MACH_APIC_H */
#endif /* __ASM_ES7000_APIC_H */
include/asm-x86/mach-summit/mach_apicdef.h → include/asm-x86/es7000/apicdef.h
View file @ d8470596
#ifndef ASM_X86__MACH_SUMMIT__MACH_APICDEF_H
#define ASM_X86__MACH_SUMMIT__MACH_APICDEF_H
#ifndef __ASM_ES7000_APICDEF_H
#define __ASM_ES7000_APICDEF_H
#define APIC_ID_MASK (0xFF<<24)
static inline unsigned get_apic_id(unsigned long x)
{
static inline unsigned get_apic_id(unsigned long x)
{
return (((x)>>24)&0xFF);
}
}
#define GET_APIC_ID(x) get_apic_id(x)
#endif /* ASM_X86__MACH_SUMMIT__MACH_APICDEF_H */
#endif
include/asm-x86/mach-es7000/mach_ipi.h → include/asm-x86/es7000/ipi.h
View file @ d8470596
#ifndef ASM_X86__MACH_ES7000__MACH_IPI_H
#define ASM_X86__MACH_ES7000__MACH_IPI_H
#ifndef __ASM_ES7000_IPI_H
#define __ASM_ES7000_IPI_H
void send_IPI_mask_sequence(cpumask_t mask, int vector);
......@@ -21,4 +21,4 @@ static inline void send_IPI_all(int vector)
send_IPI_mask(cpu_online_map, vector);
}
#endif /* ASM_X86__MACH_ES7000__MACH_IPI_H */
#endif /* __ASM_ES7000_IPI_H */
include/asm-x86/mach-es7000/mach_mpparse.h → include/asm-x86/es7000/mpparse.h
View file @ d8470596
#ifndef ASM_X86__MACH_ES7000__MACH_MPPARSE_H
#define ASM_X86__MACH_ES7000__MACH_MPPARSE_H
#ifndef __ASM_ES7000_MPPARSE_H
#define __ASM_ES7000_MPPARSE_H
#include <linux/acpi.h>
......@@ -26,4 +26,4 @@ static inline int es7000_check_dsdt(void)
}
#endif
#endif /* ASM_X86__MACH_ES7000__MACH_MPPARSE_H */
#endif /* __ASM_MACH_MPPARSE_H */
include/asm-x86/mach-es7000/mach_wakecpu.h → include/asm-x86/es7000/wakecpu.h
View file @ d8470596
#ifndef ASM_X86__MACH_ES7000__MACH_WAKECPU_H
#define ASM_X86__MACH_ES7000__MACH_WAKECPU_H
#ifndef __ASM_ES7000_WAKECPU_H
#define __ASM_ES7000_WAKECPU_H
/*
/*
* This file copes with machines that wakeup secondary CPUs by the
* INIT, INIT, STARTUP sequence.
*/
......@@ -56,4 +56,4 @@ static inline void restore_NMI_vector(unsigned short *high, unsigned short *low)
#define inquire_remote_apic(apicid) {}
#endif
#endif /* ASM_X86__MACH_ES7000__MACH_WAKECPU_H */
#endif /* __ASM_MACH_WAKECPU_H */
include/asm-x86/genapic_64.h
View file @ d8470596
......@@ -14,6 +14,7 @@
struct genapic {
char *name;
int (*acpi_madt_oem_check)(char *oem_id, char *oem_table_id);
u32 int_delivery_mode;
u32 int_dest_mode;
int (*apic_id_registered)(void);
......@@ -24,17 +25,24 @@ struct genapic {
void (*send_IPI_mask)(cpumask_t mask, int vector);
void (*send_IPI_allbutself)(int vector);
void (*send_IPI_all)(int vector);
void (*send_IPI_self)(int vector);
/* */
unsigned int (*cpu_mask_to_apicid)(cpumask_t cpumask);
unsigned int (*phys_pkg_id)(int index_msb);
unsigned int (*get_apic_id)(unsigned long x);
unsigned long (*set_apic_id)(unsigned int id);
unsigned long apic_id_mask;
};
extern struct genapic *genapic;
extern struct genapic apic_flat;
extern struct genapic apic_physflat;
extern struct genapic apic_x2apic_cluster;
extern struct genapic apic_x2apic_phys;
extern int acpi_madt_oem_check(char *, char *);
extern void apic_send_IPI_self(int vector);
enum uv_system_type {UV_NONE, UV_LEGACY_APIC, UV_X2APIC, UV_NON_UNIQUE_APIC};
extern enum uv_system_type get_uv_system_type(void);
extern int is_uv_system(void);
......
include/asm-x86/hw_irq.h
View file @ d8470596
......@@ -64,7 +64,6 @@ extern unsigned long io_apic_irqs;
extern void init_VISWS_APIC_irqs(void);
extern void setup_IO_APIC(void);
extern void disable_IO_APIC(void);
extern void print_IO_APIC(void);
extern int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn);
extern void setup_ioapic_dest(void);
......@@ -73,7 +72,9 @@ extern void enable_IO_APIC(void);
#endif
/* IPI functions */
#ifdef CONFIG_X86_32
extern void send_IPI_self(int vector);
#endif
extern void send_IPI(int dest, int vector);
/* Statistics */
......
include/asm-x86/i8259.h
View file @ d8470596
......@@ -57,4 +57,7 @@ static inline void outb_pic(unsigned char value, unsigned int port)
extern struct irq_chip i8259A_chip;
extern void mask_8259A(void);
extern void unmask_8259A(void);
#endif /* ASM_X86__I8259_H */
include/asm-x86/io_apic.h
View file @ d8470596
......@@ -107,6 +107,20 @@ struct IO_APIC_route_entry {
} __attribute__ ((packed));
struct IR_IO_APIC_route_entry {
__u64 vector : 8,
zero : 3,
index2 : 1,
delivery_status : 1,
polarity : 1,
irr : 1,
trigger : 1,
mask : 1,
reserved : 31,
format : 1,
index : 15;
} __attribute__ ((packed));
#ifdef CONFIG_X86_IO_APIC
/*
......@@ -183,6 +197,12 @@ extern int io_apic_set_pci_routing(int ioapic, int pin, int irq,
extern int (*ioapic_renumber_irq)(int ioapic, int irq);
extern void ioapic_init_mappings(void);
#ifdef CONFIG_X86_64
extern int save_mask_IO_APIC_setup(void);
extern void restore_IO_APIC_setup(void);
extern void reinit_intr_remapped_IO_APIC(int);
#endif
#else /* !CONFIG_X86_IO_APIC */
#define io_apic_assign_pci_irqs 0
static const int timer_through_8259 = 0;
......
include/asm-x86/ipi.h
View file @ d8470596
......@@ -49,6 +49,12 @@ static inline int __prepare_ICR2(unsigned int mask)
return SET_APIC_DEST_FIELD(mask);
}
static inline void __xapic_wait_icr_idle(void)
{
while (native_apic_mem_read(APIC_ICR) & APIC_ICR_BUSY)
cpu_relax();
}
static inline void __send_IPI_shortcut(unsigned int shortcut, int vector,
unsigned int dest)
{
......@@ -64,7 +70,7 @@ static inline void __send_IPI_shortcut(unsigned int shortcut, int vector,
/*
* Wait for idle.
*/
apic_wait_icr_idle();
__xapic_wait_icr_idle();
/*
* No need to touch the target chip field
......@@ -74,7 +80,7 @@ static inline void __send_IPI_shortcut(unsigned int shortcut, int vector,
/*
* Send the IPI. The write to APIC_ICR fires this off.
*/
apic_write(APIC_ICR, cfg);
native_apic_mem_write(APIC_ICR, cfg);
}
/*
......@@ -92,13 +98,13 @@ static inline void __send_IPI_dest_field(unsigned int mask, int vector,
if (unlikely(vector == NMI_VECTOR))
safe_apic_wait_icr_idle();
else
apic_wait_icr_idle();
__xapic_wait_icr_idle();
/*
* prepare target chip field
*/
cfg = __prepare_ICR2(mask);
apic_write(APIC_ICR2, cfg);
native_apic_mem_write(APIC_ICR2, cfg);
/*
* program the ICR
......@@ -108,7 +114,7 @@ static inline void __send_IPI_dest_field(unsigned int mask, int vector,
/*
* Send the IPI. The write to APIC_ICR fires this off.
*/
apic_write(APIC_ICR, cfg);
native_apic_mem_write(APIC_ICR, cfg);
}
static inline void send_IPI_mask_sequence(cpumask_t mask, int vector)
......
include/asm-x86/irq_remapping.h 0 → 100644
View file @ d8470596
#ifndef _ASM_IRQ_REMAPPING_H
#define _ASM_IRQ_REMAPPING_H
extern int x2apic;
#define IRTE_DEST(dest) ((x2apic) ? dest : dest << 8)
#endif
include/asm-x86/mach-default/mach_apic.h
View file @ d8470596
......@@ -30,6 +30,8 @@ static inline cpumask_t target_cpus(void)
#define cpu_mask_to_apicid (genapic->cpu_mask_to_apicid)
#define phys_pkg_id (genapic->phys_pkg_id)
#define vector_allocation_domain (genapic->vector_allocation_domain)
#define read_apic_id() (GET_APIC_ID(apic_read(APIC_ID)))
#define send_IPI_self (genapic->send_IPI_self)
extern void setup_apic_routing(void);
#else
#define INT_DELIVERY_MODE dest_LowestPrio
......@@ -54,7 +56,7 @@ static inline void init_apic_ldr(void)
static inline int apic_id_registered(void)
{
return physid_isset(GET_APIC_ID(read_apic_id()), phys_cpu_present_map);
return physid_isset(read_apic_id(), phys_cpu_present_map);
}
static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
......
include/asm-x86/mach-default/mach_apicdef.h
View file @ d8470596
......@@ -4,9 +4,9 @@
#include <asm/apic.h>
#ifdef CONFIG_X86_64
#define APIC_ID_MASK (0xFFu<<24)
#define GET_APIC_ID(x) (((x)>>24)&0xFFu)
#define SET_APIC_ID(x) (((x)<<24))
#define APIC_ID_MASK (genapic->apic_id_mask)
#define GET_APIC_ID(x) (genapic->get_apic_id(x))
#define SET_APIC_ID(x) (genapic->set_apic_id(x))
#else
#define APIC_ID_MASK (0xF<<24)
static inline unsigned get_apic_id(unsigned long x)
......
include/asm-x86/mach-es7000/mach_apicdef.h deleted 100644 → 0
View file @ 725c2581
#ifndef ASM_X86__MACH_ES7000__MACH_APICDEF_H
#define ASM_X86__MACH_ES7000__MACH_APICDEF_H
#define APIC_ID_MASK (0xFF<<24)
static inline unsigned get_apic_id(unsigned long x)
{
return (((x)>>24)&0xFF);
}
#define GET_APIC_ID(x) get_apic_id(x)
#endif /* ASM_X86__MACH_ES7000__MACH_APICDEF_H */
include/asm-x86/mpspec.h
View file @ d8470596
......@@ -5,11 +5,12 @@
#include <asm/mpspec_def.h>
extern int apic_version[MAX_APICS];
#ifdef CONFIG_X86_32
#include <mach_mpspec.h>
extern unsigned int def_to_bigsmp;
extern int apic_version[MAX_APICS];
extern u8 apicid_2_node[];
extern int pic_mode;
......
include/asm-x86/msidef.h
View file @ d8470596
......@@ -48,4 +48,8 @@
#define MSI_ADDR_DEST_ID(dest) (((dest) << MSI_ADDR_DEST_ID_SHIFT) & \
MSI_ADDR_DEST_ID_MASK)
#define MSI_ADDR_IR_EXT_INT (1 << 4)
#define MSI_ADDR_IR_SHV (1 << 3)
#define MSI_ADDR_IR_INDEX1(index) ((index & 0x8000) >> 13)
#define MSI_ADDR_IR_INDEX2(index) ((index & 0x7fff) << 5)
#endif /* ASM_X86__MSIDEF_H */
include/asm-x86/mach-numaq/mach_apic.h → include/asm-x86/numaq/apic.h
View file @ d8470596
#ifndef ASM_X86__MACH_NUMAQ__MACH_APIC_H
#define ASM_X86__MACH_NUMAQ__MACH_APIC_H
#ifndef __ASM_NUMAQ_APIC_H
#define __ASM_NUMAQ_APIC_H
#include <asm/io.h>
#include <linux/mmzone.h>
......@@ -135,4 +135,4 @@ static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
return cpuid_apic >> index_msb;
}
#endif /* ASM_X86__MACH_NUMAQ__MACH_APIC_H */
#endif /* __ASM_NUMAQ_APIC_H */
include/asm-x86/mach-numaq/mach_apicdef.h → include/asm-x86/numaq/apicdef.h
View file @ d8470596
#ifndef ASM_X86__MACH_NUMAQ__MACH_APICDEF_H
#define ASM_X86__MACH_NUMAQ__MACH_APICDEF_H
#ifndef __ASM_NUMAQ_APICDEF_H
#define __ASM_NUMAQ_APICDEF_H
#define APIC_ID_MASK (0xF<<24)
......@@ -11,4 +11,4 @@ static inline unsigned get_apic_id(unsigned long x)
#define GET_APIC_ID(x) get_apic_id(x)
#endif /* ASM_X86__MACH_NUMAQ__MACH_APICDEF_H */
#endif
include/asm-x86/mach-numaq/mach_ipi.h → include/asm-x86/numaq/ipi.h
View file @ d8470596
#ifndef ASM_X86__MACH_NUMAQ__MACH_IPI_H
#define ASM_X86__MACH_NUMAQ__MACH_IPI_H
#ifndef __ASM_NUMAQ_IPI_H
#define __ASM_NUMAQ_IPI_H
void send_IPI_mask_sequence(cpumask_t, int vector);
......@@ -22,4 +22,4 @@ static inline void send_IPI_all(int vector)
send_IPI_mask(cpu_online_map, vector);
}
#endif /* ASM_X86__MACH_NUMAQ__MACH_IPI_H */
#endif /* __ASM_NUMAQ_IPI_H */
include/asm-x86/mach-numaq/mach_mpparse.h → include/asm-x86/numaq/mpparse.h
View file @ d8470596
#ifndef ASM_X86__MACH_NUMAQ__MACH_MPPARSE_H
#define ASM_X86__MACH_NUMAQ__MACH_MPPARSE_H
#ifndef __ASM_NUMAQ_MPPARSE_H
#define __ASM_NUMAQ_MPPARSE_H
extern void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
char *productid);
#endif /* ASM_X86__MACH_NUMAQ__MACH_MPPARSE_H */
#endif /* __ASM_NUMAQ_MPPARSE_H */
include/asm-x86/mach-numaq/mach_wakecpu.h → include/asm-x86/numaq/wakecpu.h
View file @ d8470596
#ifndef ASM_X86__MACH_NUMAQ__MACH_WAKECPU_H
#define ASM_X86__MACH_NUMAQ__MACH_WAKECPU_H
#ifndef __ASM_NUMAQ_WAKECPU_H
#define __ASM_NUMAQ_WAKECPU_H
/* This file copes with machines that wakeup secondary CPUs by NMIs */
......@@ -40,4 +40,4 @@ static inline void restore_NMI_vector(unsigned short *high, unsigned short *low)
#define inquire_remote_apic(apicid) {}
#endif /* ASM_X86__MACH_NUMAQ__MACH_WAKECPU_H */
#endif /* __ASM_NUMAQ_WAKECPU_H */
include/asm-x86/paravirt.h
View file @ d8470596
......@@ -201,12 +201,6 @@ struct pv_irq_ops {
struct pv_apic_ops {
#ifdef CONFIG_X86_LOCAL_APIC
/*
* Direct APIC operations, principally for VMI. Ideally
* these shouldn't be in this interface.
*/
void (*apic_write)(unsigned long reg, u32 v);
u32 (*apic_read)(unsigned long reg);
void (*setup_boot_clock)(void);
void (*setup_secondary_clock)(void);
......@@ -910,19 +904,6 @@ static inline void slow_down_io(void)
}
#ifdef CONFIG_X86_LOCAL_APIC
/*
* Basic functions accessing APICs.
*/
static inline void apic_write(unsigned long reg, u32 v)
{
PVOP_VCALL2(pv_apic_ops.apic_write, reg, v);
}
static inline u32 apic_read(unsigned long reg)
{
return PVOP_CALL1(unsigned long, pv_apic_ops.apic_read, reg);
}
static inline void setup_boot_clock(void)
{
PVOP_VCALL0(pv_apic_ops.setup_boot_clock);
......
include/asm-x86/setup.h
View file @ d8470596
......@@ -38,6 +38,7 @@ struct x86_quirks {
void (*mpc_oem_pci_bus)(struct mpc_config_bus *m);
void (*smp_read_mpc_oem)(struct mp_config_oemtable *oemtable,
unsigned short oemsize);
int (*setup_ioapic_ids)(void);
};
extern struct x86_quirks *x86_quirks;
......
include/asm-x86/smp.h
View file @ d8470596
......@@ -167,30 +167,33 @@ extern int safe_smp_processor_id(void);
#ifdef CONFIG_X86_LOCAL_APIC
#ifndef CONFIG_X86_64
static inline int logical_smp_processor_id(void)
{
/* we don't want to mark this access volatile - bad code generation */
return GET_APIC_LOGICAL_ID(*(u32 *)(APIC_BASE + APIC_LDR));
}
#ifndef CONFIG_X86_64
#include <mach_apicdef.h>
static inline unsigned int read_apic_id(void)
{
return *(u32 *)(APIC_BASE + APIC_ID);
unsigned int reg;
reg = *(u32 *)(APIC_BASE + APIC_ID);
return GET_APIC_ID(reg);
}
#else
extern unsigned int read_apic_id(void);
#endif
# ifdef APIC_DEFINITION
# if defined(APIC_DEFINITION) || defined(CONFIG_X86_64)
extern int hard_smp_processor_id(void);
# else
# include <mach_apicdef.h>
#include <mach_apicdef.h>
static inline int hard_smp_processor_id(void)
{
/* we don't want to mark this access volatile - bad code generation */
return GET_APIC_ID(read_apic_id());
return read_apic_id();
}
# endif /* APIC_DEFINITION */
......
include/asm-x86/mach-summit/mach_apic.h → include/asm-x86/summit/apic.h
View file @ d8470596
#ifndef ASM_X86__MACH_SUMMIT__MACH_APIC_H
#define ASM_X86__MACH_SUMMIT__MACH_APIC_H
#ifndef __ASM_SUMMIT_APIC_H
#define __ASM_SUMMIT_APIC_H
#include <asm/smp.h>
......@@ -21,7 +21,7 @@ static inline cpumask_t target_cpus(void)
* Just start on cpu 0. IRQ balancing will spread load
*/
return cpumask_of_cpu(0);
}
}
#define TARGET_CPUS (target_cpus())
#define INT_DELIVERY_MODE (dest_LowestPrio)
......@@ -30,10 +30,10 @@ static inline cpumask_t target_cpus(void)
static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
{
return 0;
}
}
/* we don't use the phys_cpu_present_map to indicate apicid presence */
static inline unsigned long check_apicid_present(int bit)
static inline unsigned long check_apicid_present(int bit)
{
return 1;
}
......@@ -122,7 +122,7 @@ static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_id_map)
static inline physid_mask_t apicid_to_cpu_present(int apicid)
{
return physid_mask_of_physid(apicid);
return physid_mask_of_physid(0);
}
static inline void setup_portio_remap(void)
......@@ -143,22 +143,22 @@ static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
int num_bits_set;
int cpus_found = 0;
int cpu;
int apicid;
int apicid;
num_bits_set = cpus_weight(cpumask);
/* Return id to all */
if (num_bits_set == NR_CPUS)
return (int) 0xFF;
/*
* The cpus in the mask must all be on the apic cluster. If are not
* on the same apicid cluster return default value of TARGET_CPUS.
/*
* The cpus in the mask must all be on the apic cluster. If are not
* on the same apicid cluster return default value of TARGET_CPUS.
*/
cpu = first_cpu(cpumask);
apicid = cpu_to_logical_apicid(cpu);
while (cpus_found < num_bits_set) {
if (cpu_isset(cpu, cpumask)) {
int new_apicid = cpu_to_logical_apicid(cpu);
if (apicid_cluster(apicid) !=
if (apicid_cluster(apicid) !=
apicid_cluster(new_apicid)){
printk ("%s: Not a valid mask!\n",__FUNCTION__);
return 0xFF;
......@@ -182,4 +182,4 @@ static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
return hard_smp_processor_id() >> index_msb;
}
#endif /* ASM_X86__MACH_SUMMIT__MACH_APIC_H */
#endif /* __ASM_SUMMIT_APIC_H */
include/asm-x86/summit/apicdef.h 0 → 100644
View file @ d8470596
#ifndef __ASM_SUMMIT_APICDEF_H
#define __ASM_SUMMIT_APICDEF_H
#define APIC_ID_MASK (0xFF<<24)
static inline unsigned get_apic_id(unsigned long x)
{
return (x>>24)&0xFF;
}
#define GET_APIC_ID(x) get_apic_id(x)
#endif
include/asm-x86/mach-summit/mach_ipi.h → include/asm-x86/summit/ipi.h
View file @ d8470596
#ifndef ASM_X86__MACH_SUMMIT__MACH_IPI_H
#define ASM_X86__MACH_SUMMIT__MACH_IPI_H
#ifndef __ASM_SUMMIT_IPI_H
#define __ASM_SUMMIT_IPI_H
void send_IPI_mask_sequence(cpumask_t mask, int vector);
......@@ -22,4 +22,4 @@ static inline void send_IPI_all(int vector)
send_IPI_mask(cpu_online_map, vector);
}
#endif /* ASM_X86__MACH_SUMMIT__MACH_IPI_H */
#endif /* __ASM_SUMMIT_IPI_H */
include/asm-x86/mach-summit/irq_vectors_limits.h → include/asm-x86/summit/irq_vectors_limits.h
View file @ d8470596
#ifndef ASM_X86__MACH_SUMMIT__IRQ_VECTORS_LIMITS_H
#define ASM_X86__MACH_SUMMIT__IRQ_VECTORS_LIMITS_H
#ifndef _ASM_IRQ_VECTORS_LIMITS_H
#define _ASM_IRQ_VECTORS_LIMITS_H
/*
* For Summit or generic (i.e. installer) kernels, we have lots of I/O APICs,
......@@ -11,4 +11,4 @@
#define NR_IRQS 224
#define NR_IRQ_VECTORS 1024
#endif /* ASM_X86__MACH_SUMMIT__IRQ_VECTORS_LIMITS_H */
#endif /* _ASM_IRQ_VECTORS_LIMITS_H */
include/asm-x86/mach-summit/mach_mpparse.h → include/asm-x86/summit/mpparse.h
View file @ d8470596
#ifndef ASM_X86__MACH_SUMMIT__MACH_MPPARSE_H
#define ASM_X86__MACH_SUMMIT__MACH_MPPARSE_H
#ifndef __ASM_SUMMIT_MPPARSE_H
#define __ASM_SUMMIT_MPPARSE_H
#include <mach_apic.h>
#include <asm/tsc.h>
extern int use_cyclone;
......@@ -12,11 +11,11 @@ extern void setup_summit(void);
#define setup_summit() {}
#endif
static inline int mps_oem_check(struct mp_config_table *mpc, char *oem,
static inline int mps_oem_check(struct mp_config_table *mpc, char *oem,
char *productid)
{
if (!strncmp(oem, "IBM ENSW", 8) &&
(!strncmp(productid, "VIGIL SMP", 9)
if (!strncmp(oem, "IBM ENSW", 8) &&
(!strncmp(productid, "VIGIL SMP", 9)
|| !strncmp(productid, "EXA", 3)
|| !strncmp(productid, "RUTHLESS SMP", 12))){
mark_tsc_unstable("Summit based system");
......@@ -107,4 +106,4 @@ static inline int is_WPEG(struct rio_detail *rio){
rio->type == LookOutAWPEG || rio->type == LookOutBWPEG);
}
#endif /* ASM_X86__MACH_SUMMIT__MACH_MPPARSE_H */
#endif /* __ASM_SUMMIT_MPPARSE_H */
include/linux/dmar.h
View file @ d8470596
......@@ -25,9 +25,99 @@
#include <linux/types.h>
#include <linux/msi.h>
#ifdef CONFIG_DMAR
#if defined(CONFIG_DMAR) || defined(CONFIG_INTR_REMAP)
struct intel_iommu;
struct dmar_drhd_unit {
struct list_head list; /* list of drhd units */
struct acpi_dmar_header *hdr; /* ACPI header */
u64 reg_base_addr; /* register base address*/
struct pci_dev **devices; /* target device array */
int devices_cnt; /* target device count */
u8 ignored:1; /* ignore drhd */
u8 include_all:1;
struct intel_iommu *iommu;
};
extern struct list_head dmar_drhd_units;
#define for_each_drhd_unit(drhd) \
list_for_each_entry(drhd, &dmar_drhd_units, list)
extern int dmar_table_init(void);
extern int early_dmar_detect(void);
extern int dmar_dev_scope_init(void);
/* Intel IOMMU detection */
extern void detect_intel_iommu(void);
extern int parse_ioapics_under_ir(void);
extern int alloc_iommu(struct dmar_drhd_unit *);
#else
static inline void detect_intel_iommu(void)
{
return;
}
static inline int dmar_table_init(void)
{
return -ENODEV;
}
#endif /* !CONFIG_DMAR && !CONFIG_INTR_REMAP */
#ifdef CONFIG_INTR_REMAP
extern int intr_remapping_enabled;
extern int enable_intr_remapping(int);
struct irte {
union {
struct {
__u64 present : 1,
fpd : 1,
dst_mode : 1,
redir_hint : 1,
trigger_mode : 1,
dlvry_mode : 3,
avail : 4,
__reserved_1 : 4,
vector : 8,
__reserved_2 : 8,
dest_id : 32;
};
__u64 low;
};
union {
struct {
__u64 sid : 16,
sq : 2,
svt : 2,
__reserved_3 : 44;
};
__u64 high;
};
};
extern int get_irte(int irq, struct irte *entry);
extern int modify_irte(int irq, struct irte *irte_modified);
extern int alloc_irte(struct intel_iommu *iommu, int irq, u16 count);
extern int set_irte_irq(int irq, struct intel_iommu *iommu, u16 index,
u16 sub_handle);
extern int map_irq_to_irte_handle(int irq, u16 *sub_handle);
extern int clear_irte_irq(int irq, struct intel_iommu *iommu, u16 index);
extern int flush_irte(int irq);
extern int free_irte(int irq);
extern int irq_remapped(int irq);
extern struct intel_iommu *map_dev_to_ir(struct pci_dev *dev);
extern struct intel_iommu *map_ioapic_to_ir(int apic);
#else
#define irq_remapped(irq) (0)
#define enable_intr_remapping(mode) (-1)
#define intr_remapping_enabled (0)
#endif
#ifdef CONFIG_DMAR
extern const char *dmar_get_fault_reason(u8 fault_reason);
/* Can't use the common MSI interrupt functions
......@@ -40,47 +130,30 @@ extern void dmar_msi_write(int irq, struct msi_msg *msg);
extern int dmar_set_interrupt(struct intel_iommu *iommu);
extern int arch_setup_dmar_msi(unsigned int irq);
/* Intel IOMMU detection and initialization functions */
extern void detect_intel_iommu(void);
extern int intel_iommu_init(void);
extern int dmar_table_init(void);
extern int early_dmar_detect(void);
extern struct list_head dmar_drhd_units;
extern int iommu_detected, no_iommu;
extern struct list_head dmar_rmrr_units;
struct dmar_drhd_unit {
struct list_head list; /* list of drhd units */
u64 reg_base_addr; /* register base address*/
struct pci_dev **devices; /* target device array */
int devices_cnt; /* target device count */
u8 ignored:1; /* ignore drhd */
u8 include_all:1;
struct intel_iommu *iommu;
};
struct dmar_rmrr_unit {
struct list_head list; /* list of rmrr units */
struct acpi_dmar_header *hdr; /* ACPI header */
u64 base_address; /* reserved base address*/
u64 end_address; /* reserved end address */
struct pci_dev **devices; /* target devices */
int devices_cnt; /* target device count */
};
#define for_each_drhd_unit(drhd) \
list_for_each_entry(drhd, &dmar_drhd_units, list)
#define for_each_rmrr_units(rmrr) \
list_for_each_entry(rmrr, &dmar_rmrr_units, list)
/* Intel DMAR initialization functions */
extern int intel_iommu_init(void);
extern int dmar_disabled;
#else
static inline void detect_intel_iommu(void)
{
return;
}
static inline int intel_iommu_init(void)
{
#ifdef CONFIG_INTR_REMAP
return dmar_dev_scope_init();
#else
return -ENODEV;
#endif
}
#endif /* !CONFIG_DMAR */
#endif /* __DMAR_H__ */
include/linux/irq.h
View file @ d8470596
......@@ -62,6 +62,7 @@ typedef void (*irq_flow_handler_t)(unsigned int irq,
#define IRQ_MOVE_PENDING 0x00200000 /* need to re-target IRQ destination */
#define IRQ_NO_BALANCING 0x00400000 /* IRQ is excluded from balancing */
#define IRQ_SPURIOUS_DISABLED 0x00800000 /* IRQ was disabled by the spurious trap */
#define IRQ_MOVE_PCNTXT 0x01000000 /* IRQ migration from process context */
#ifdef CONFIG_IRQ_PER_CPU
# define CHECK_IRQ_PER_CPU(var) ((var) & IRQ_PER_CPU)
......
kernel/irq/manage.c
View file @ d8470596
......@@ -89,7 +89,14 @@ int irq_set_affinity(unsigned int irq, cpumask_t cpumask)
set_balance_irq_affinity(irq, cpumask);
#ifdef CONFIG_GENERIC_PENDING_IRQ
set_pending_irq(irq, cpumask);
if (desc->status & IRQ_MOVE_PCNTXT) {
unsigned long flags;
spin_lock_irqsave(&desc->lock, flags);
desc->chip->set_affinity(irq, cpumask);
spin_unlock_irqrestore(&desc->lock, flags);
} else
set_pending_irq(irq, cpumask);
#else
desc->affinity = cpumask;
desc->chip->set_affinity(irq, cpumask);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7