Skip to content

L
linux
Commit d90ce871 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge branch 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6 

* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  Staging: comedi: fix build breakages on some platforms
  Staging: brcm80211: disable drivers except for X86 or MIPS platforms
  Staging: brcm80211: disable drivers for PPC platforms
  Staging: iio: Make IIO depend on GENERIC_HARDIRQS
  Staging: mei: fix suspend failure
  Staging: fix iio builds when IIO_RING_BUFFER is not enabled
  Staging: Comedi: Build only on arches providing PAGE_KERNEL_NOCACHE
  Staging: fix more iio builds when IIO_RING_BUFFER is not enabled
parents 505cb6bc a73738e9
Show whitespace changes
Inline Side-by-side
Showing with 40 additions and 11 deletions
drivers/staging/brcm80211/Kconfig
View file @ d90ce871
......@@ -7,6 +7,7 @@ config BRCMSMAC
default n
depends on PCI
depends on WLAN && MAC80211
depends on X86 || MIPS
select BRCMUTIL
select FW_LOADER
select CRC_CCITT
......@@ -20,6 +21,7 @@ config BRCMFMAC
default n
depends on MMC
depends on WLAN && CFG80211
depends on X86 || MIPS
select BRCMUTIL
select FW_LOADER
select WIRELESS_EXT
......
drivers/staging/comedi/Kconfig
View file @ d90ce871
......@@ -2,6 +2,7 @@ config COMEDI
tristate "Data acquisition support (comedi)"
default N
depends on m
depends on BROKEN || FRV || M32R || MN10300 || SUPERH || TILE || X86
---help---
Enable support a wide range of data acquisition devices
for Linux.
......@@ -160,6 +161,7 @@ config COMEDI_PCL730
config COMEDI_PCL812
tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216"
depends on VIRT_TO_BUS
default N
---help---
Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink
......@@ -171,6 +173,7 @@ config COMEDI_PCL812
config COMEDI_PCL816
tristate "Advantech PCL-814 and PCL-816 ISA card support"
depends on VIRT_TO_BUS
default N
---help---
Enable support for Advantech PCL-814 and PCL-816 ISA cards
......@@ -180,6 +183,7 @@ config COMEDI_PCL816
config COMEDI_PCL818
tristate "Advantech PCL-718 and PCL-818 ISA card support"
depends on VIRT_TO_BUS
default N
---help---
Enable support for Advantech PCL-818 ISA cards
......@@ -269,6 +273,7 @@ config COMEDI_DAS800
config COMEDI_DAS1800
tristate "DAS1800 and compatible ISA card support"
depends on VIRT_TO_BUS
select COMEDI_FC
default N
---help---
......@@ -340,6 +345,7 @@ config COMEDI_DT2817
config COMEDI_DT282X
tristate "Data Translation DT2821 series and DT-EZ ISA card support"
select COMEDI_FC
depends on VIRT_TO_BUS
default N
---help---
Enable support for Data Translation DT2821 series including DT-EZ
......@@ -419,6 +425,7 @@ config COMEDI_ADQ12B
config COMEDI_NI_AT_A2150
tristate "NI AT-A2150 ISA card support"
depends on COMEDI_NI_COMMON
depends on VIRT_TO_BUS
default N
---help---
Enable support for National Instruments AT-A2150 cards
......@@ -536,6 +543,7 @@ if COMEDI_PCI_DRIVERS && PCI
config COMEDI_ADDI_APCI_035
tristate "ADDI-DATA APCI_035 support"
depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_035 cards
......@@ -545,6 +553,7 @@ config COMEDI_ADDI_APCI_035
config COMEDI_ADDI_APCI_1032
tristate "ADDI-DATA APCI_1032 support"
depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_1032 cards
......@@ -554,6 +563,7 @@ config COMEDI_ADDI_APCI_1032
config COMEDI_ADDI_APCI_1500
tristate "ADDI-DATA APCI_1500 support"
depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_1500 cards
......@@ -563,6 +573,7 @@ config COMEDI_ADDI_APCI_1500
config COMEDI_ADDI_APCI_1516
tristate "ADDI-DATA APCI_1516 support"
depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_1516 cards
......@@ -572,6 +583,7 @@ config COMEDI_ADDI_APCI_1516
config COMEDI_ADDI_APCI_1564
tristate "ADDI-DATA APCI_1564 support"
depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_1564 cards
......@@ -581,6 +593,7 @@ config COMEDI_ADDI_APCI_1564
config COMEDI_ADDI_APCI_16XX
tristate "ADDI-DATA APCI_16xx support"
depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_16xx cards
......@@ -590,6 +603,7 @@ config COMEDI_ADDI_APCI_16XX
config COMEDI_ADDI_APCI_2016
tristate "ADDI-DATA APCI_2016 support"
depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_2016 cards
......@@ -599,6 +613,7 @@ config COMEDI_ADDI_APCI_2016
config COMEDI_ADDI_APCI_2032
tristate "ADDI-DATA APCI_2032 support"
depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_2032 cards
......@@ -608,6 +623,7 @@ config COMEDI_ADDI_APCI_2032
config COMEDI_ADDI_APCI_2200
tristate "ADDI-DATA APCI_2200 support"
depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_2200 cards
......@@ -617,6 +633,7 @@ config COMEDI_ADDI_APCI_2200
config COMEDI_ADDI_APCI_3001
tristate "ADDI-DATA APCI_3001 support"
depends on VIRT_TO_BUS
select COMEDI_FC
default N
---help---
......@@ -627,6 +644,7 @@ config COMEDI_ADDI_APCI_3001
config COMEDI_ADDI_APCI_3120
tristate "ADDI-DATA APCI_3520 support"
depends on VIRT_TO_BUS
select COMEDI_FC
default N
---help---
......@@ -637,6 +655,7 @@ config COMEDI_ADDI_APCI_3120
config COMEDI_ADDI_APCI_3501
tristate "ADDI-DATA APCI_3501 support"
depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_3501 cards
......@@ -646,6 +665,7 @@ config COMEDI_ADDI_APCI_3501
config COMEDI_ADDI_APCI_3XXX
tristate "ADDI-DATA APCI_3xxx support"
depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_3xxx cards
......@@ -712,6 +732,7 @@ config COMEDI_ADL_PCI9111
config COMEDI_ADL_PCI9118
tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support"
select COMEDI_FC
depends on VIRT_TO_BUS
default N
---help---
Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards
......@@ -1287,6 +1308,7 @@ config COMEDI_NI_LABPC
depends on COMEDI_MITE
select COMEDI_8255
select COMEDI_FC
depends on VIRT_TO_BUS
default N
---help---
Enable support for National Instruments Lab-PC and compatibles
......
drivers/staging/iio/Kconfig
View file @ d90ce871
......@@ -4,7 +4,7 @@
menuconfig IIO
tristate "Industrial I/O support"
depends on !S390
depends on GENERIC_HARDIRQS
help
The industrial I/O subsystem provides a unified framework for
drivers for many different types of embedded sensors using a
......
drivers/staging/iio/accel/adis16204.h
View file @ d90ce871
......@@ -84,7 +84,6 @@ struct adis16204_state {
int adis16204_set_irq(struct iio_dev *indio_dev, bool enable);
#ifdef CONFIG_IIO_RING_BUFFER
enum adis16204_scan {
ADIS16204_SCAN_SUPPLY,
ADIS16204_SCAN_ACC_X,
......@@ -93,6 +92,7 @@ enum adis16204_scan {
ADIS16204_SCAN_TEMP,
};
#ifdef CONFIG_IIO_RING_BUFFER
void adis16204_remove_trigger(struct iio_dev *indio_dev);
int adis16204_probe_trigger(struct iio_dev *indio_dev);
......
drivers/staging/iio/accel/adis16209.h
View file @ d90ce871
......@@ -121,8 +121,6 @@ struct adis16209_state {
int adis16209_set_irq(struct iio_dev *indio_dev, bool enable);
#ifdef CONFIG_IIO_RING_BUFFER
#define ADIS16209_SCAN_SUPPLY 0
#define ADIS16209_SCAN_ACC_X 1
#define ADIS16209_SCAN_ACC_Y 2
......@@ -132,6 +130,8 @@ int adis16209_set_irq(struct iio_dev *indio_dev, bool enable);
#define ADIS16209_SCAN_INCLI_Y 6
#define ADIS16209_SCAN_ROT 7
#ifdef CONFIG_IIO_RING_BUFFER
void adis16209_remove_trigger(struct iio_dev *indio_dev);
int adis16209_probe_trigger(struct iio_dev *indio_dev);
......
drivers/staging/iio/gyro/adis16260.h
View file @ d90ce871
......@@ -104,7 +104,6 @@ struct adis16260_state {
int adis16260_set_irq(struct iio_dev *indio_dev, bool enable);
#ifdef CONFIG_IIO_RING_BUFFER
/* At the moment triggers are only used for ring buffer
* filling. This may change!
*/
......@@ -115,6 +114,7 @@ int adis16260_set_irq(struct iio_dev *indio_dev, bool enable);
#define ADIS16260_SCAN_TEMP 3
#define ADIS16260_SCAN_ANGL 4
#ifdef CONFIG_IIO_RING_BUFFER
void adis16260_remove_trigger(struct iio_dev *indio_dev);
int adis16260_probe_trigger(struct iio_dev *indio_dev);
......
drivers/staging/iio/imu/adis16400.h
View file @ d90ce871
......@@ -158,7 +158,6 @@ struct adis16400_state {
int adis16400_set_irq(struct iio_dev *indio_dev, bool enable);
#ifdef CONFIG_IIO_RING_BUFFER
/* At the moment triggers are only used for ring buffer
* filling. This may change!
*/
......@@ -182,6 +181,7 @@ int adis16400_set_irq(struct iio_dev *indio_dev, bool enable);
#define ADIS16300_SCAN_INCLI_X 12
#define ADIS16300_SCAN_INCLI_Y 13
#ifdef CONFIG_IIO_RING_BUFFER
void adis16400_remove_trigger(struct iio_dev *indio_dev);
int adis16400_probe_trigger(struct iio_dev *indio_dev);
......
drivers/staging/mei/init.c
View file @ d90ce871
......@@ -189,7 +189,7 @@ int mei_hw_init(struct mei_device *dev)
mutex_lock(&dev->device_lock);
}
if (!err && !dev->recvd_msg) {
if (err <= 0 && !dev->recvd_msg) {
dev->mei_state = MEI_DISABLED;
dev_dbg(&dev->pdev->dev,
"wait_event_interruptible_timeout failed"
......
drivers/staging/mei/wd.c
View file @ d90ce871
......@@ -169,10 +169,15 @@ int mei_wd_stop(struct mei_device *dev, bool preserve)
ret = wait_event_interruptible_timeout(dev->wait_stop_wd,
dev->wd_stopped, 10 * HZ);
mutex_lock(&dev->device_lock);
if (!dev->wd_stopped)
dev_dbg(&dev->pdev->dev, "stop wd failed to complete.\n");
else
dev_dbg(&dev->pdev->dev, "stop wd complete.\n");
if (dev->wd_stopped) {
dev_dbg(&dev->pdev->dev, "stop wd complete ret=%d.\n", ret);
ret = 0;
} else {
if (!ret)
ret = -ETIMEDOUT;
dev_warn(&dev->pdev->dev,
"stop wd failed to complete ret=%d.\n", ret);
}
if (preserve)
dev->wd_timeout = wd_timeout;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7