Commit d94eab86 authored by Wang Xiaoyin's avatar Wang Xiaoyin Committed by Wei Xu

arm64: dts: hi3660: add gpio dtsi file for Hisilicon Hi3660 SOC

This patch adds pl061 device nodes for Hi3660 SoC.
Signed-off-by: default avatarWang Xiaoyin <hw.wangxiaoyin@hisilicon.com>
Signed-off-by: default avatarWei Xu <xuwei5@hisilicon.com>
parent 5f8a3b77
......@@ -251,5 +251,385 @@ uart5: serial@fdf05000 {
clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
gpio0: gpio@e8a0b000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0 0xe8a0b000 0 0x1000>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 1 0 7>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3660_PCLK_GPIO0>;
clock-names = "apb_pclk";
};
gpio1: gpio@e8a0c000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0 0xe8a0c000 0 0x1000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 1 7 7>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3660_PCLK_GPIO1>;
clock-names = "apb_pclk";
};
gpio2: gpio@e8a0d000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0 0xe8a0d000 0 0x1000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 14 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3660_PCLK_GPIO2>;
clock-names = "apb_pclk";
};
gpio3: gpio@e8a0e000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0 0xe8a0e000 0 0x1000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 22 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3660_PCLK_GPIO3>;
clock-names = "apb_pclk";
};
gpio4: gpio@e8a0f000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0 0xe8a0f000 0 0x1000>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 30 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3660_PCLK_GPIO4>;
clock-names = "apb_pclk";
};
gpio5: gpio@e8a10000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0 0xe8a10000 0 0x1000>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 38 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3660_PCLK_GPIO5>;
clock-names = "apb_pclk";
};
gpio6: gpio@e8a11000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0 0xe8a11000 0 0x1000>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 46 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3660_PCLK_GPIO6>;
clock-names = "apb_pclk";
};
gpio7: gpio@e8a12000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0 0xe8a12000 0 0x1000>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 54 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3660_PCLK_GPIO7>;
clock-names = "apb_pclk";
};
gpio8: gpio@e8a13000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0 0xe8a13000 0 0x1000>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 62 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3660_PCLK_GPIO8>;
clock-names = "apb_pclk";
};
gpio9: gpio@e8a14000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0 0xe8a14000 0 0x1000>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 70 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3660_PCLK_GPIO9>;
clock-names = "apb_pclk";
};
gpio10: gpio@e8a15000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0 0xe8a15000 0 0x1000>;
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 78 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3660_PCLK_GPIO10>;
clock-names = "apb_pclk";
};
gpio11: gpio@e8a16000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0 0xe8a16000 0 0x1000>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 86 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3660_PCLK_GPIO11>;
clock-names = "apb_pclk";
};
gpio12: gpio@e8a17000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0 0xe8a17000 0 0x1000>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 94 3 &pmx0 7 101 1>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3660_PCLK_GPIO12>;
clock-names = "apb_pclk";
};
gpio13: gpio@e8a18000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0 0xe8a18000 0 0x1000>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 102 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3660_PCLK_GPIO13>;
clock-names = "apb_pclk";
};
gpio14: gpio@e8a19000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0 0xe8a19000 0 0x1000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 110 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3660_PCLK_GPIO14>;
clock-names = "apb_pclk";
};
gpio15: gpio@e8a1a000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0 0xe8a1a000 0 0x1000>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 118 6>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3660_PCLK_GPIO15>;
clock-names = "apb_pclk";
};
gpio16: gpio@e8a1b000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0 0xe8a1b000 0 0x1000>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3660_PCLK_GPIO16>;
clock-names = "apb_pclk";
};
gpio17: gpio@e8a1c000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0 0xe8a1c000 0 0x1000>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3660_PCLK_GPIO17>;
clock-names = "apb_pclk";
};
gpio18: gpio@ff3b4000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0 0xff3b4000 0 0x1000>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx2 0 0 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3660_PCLK_GPIO18>;
clock-names = "apb_pclk";
};
gpio19: gpio@ff3b5000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0 0xff3b5000 0 0x1000>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx2 0 8 4>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3660_PCLK_GPIO19>;
clock-names = "apb_pclk";
};
gpio20: gpio@e8a1f000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0 0xe8a1f000 0 0x1000>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx1 0 0 6>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3660_PCLK_GPIO20>;
clock-names = "apb_pclk";
};
gpio21: gpio@e8a20000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0 0xe8a20000 0 0x1000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&pmx3 0 0 6>;
clocks = <&crg_ctrl HI3660_PCLK_GPIO21>;
clock-names = "apb_pclk";
};
gpio22: gpio@fff0b000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0 0xfff0b000 0 0x1000>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
/* GPIO176 */
gpio-ranges = <&pmx4 2 0 6>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&sctrl HI3660_PCLK_AO_GPIO0>;
clock-names = "apb_pclk";
};
gpio23: gpio@fff0c000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0 0xfff0c000 0 0x1000>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
/* GPIO184 */
gpio-ranges = <&pmx4 0 6 7>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&sctrl HI3660_PCLK_AO_GPIO1>;
clock-names = "apb_pclk";
};
gpio24: gpio@fff0d000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0 0xfff0d000 0 0x1000>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
/* GPIO192 */
gpio-ranges = <&pmx4 0 13 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&sctrl HI3660_PCLK_AO_GPIO2>;
clock-names = "apb_pclk";
};
gpio25: gpio@fff0e000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0 0xfff0e000 0 0x1000>;
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
/* GPIO200 */
gpio-ranges = <&pmx4 0 21 4 &pmx4 5 25 3>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&sctrl HI3660_PCLK_AO_GPIO3>;
clock-names = "apb_pclk";
};
gpio26: gpio@fff0f000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0 0xfff0f000 0 0x1000>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
/* GPIO208 */
gpio-ranges = <&pmx4 0 28 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&sctrl HI3660_PCLK_AO_GPIO4>;
clock-names = "apb_pclk";
};
gpio27: gpio@fff10000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0 0xfff10000 0 0x1000>;
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
/* GPIO216 */
gpio-ranges = <&pmx4 0 36 6>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&sctrl HI3660_PCLK_AO_GPIO5>;
clock-names = "apb_pclk";
};
gpio28: gpio@fff1d000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0 0xfff1d000 0 0x1000>;
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&sctrl HI3660_PCLK_AO_GPIO6>;
clock-names = "apb_pclk";
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment