Commit da1d39e3 authored by Simon Horman's avatar Simon Horman Committed by Paul Mundt

mmc, sh: Move constants to sh_mmcif.h

This moves some constants from sh_mmcif.c to sh_mmcif.h
so that they can be used in sh_mmcif_boot_init().

It also alters the definition of SOFT_RST_OFF from (0 << 31) to
~SOFT_RST_ON (= ~(1 << 31)). The former seems bogus.  The latter is
consistent with the code in sh_mmcif_boot_init().

Cc: Yusuke Goda <yusuke.goda.sx@renesas.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: default avatarSimon Horman <horms@verge.net.au>
Signed-off-by: default avatarPaul Mundt <lethal@linux-sh.org>
parent a7bcf21e
......@@ -62,25 +62,6 @@
/* CE_BLOCK_SET */
#define BLOCK_SIZE_MASK 0x0000ffff
/* CE_CLK_CTRL */
#define CLK_ENABLE (1 << 24) /* 1: output mmc clock */
#define CLK_CLEAR ((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16))
#define CLK_SUP_PCLK ((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16))
#define SRSPTO_256 ((1 << 13) | (0 << 12)) /* resp timeout */
#define SRBSYTO_29 ((1 << 11) | (1 << 10) | \
(1 << 9) | (1 << 8)) /* resp busy timeout */
#define SRWDTO_29 ((1 << 7) | (1 << 6) | \
(1 << 5) | (1 << 4)) /* read/write timeout */
#define SCCSTO_29 ((1 << 3) | (1 << 2) | \
(1 << 1) | (1 << 0)) /* ccs timeout */
/* CE_BUF_ACC */
#define BUF_ACC_DMAWEN (1 << 25)
#define BUF_ACC_DMAREN (1 << 24)
#define BUF_ACC_BUSW_32 (0 << 17)
#define BUF_ACC_BUSW_16 (1 << 17)
#define BUF_ACC_ATYP (1 << 16)
/* CE_INT */
#define INT_CCSDE (1 << 29)
#define INT_CMD12DRE (1 << 26)
......@@ -165,10 +146,6 @@
STS2_AC12BSYTO | STS2_RSPBSYTO | \
STS2_AC12RSPTO | STS2_RSPTO)
/* CE_VERSION */
#define SOFT_RST_ON (1 << 31)
#define SOFT_RST_OFF (0 << 31)
#define CLKDEV_EMMC_DATA 52000000 /* 52MHz */
#define CLKDEV_MMC_DATA 20000000 /* 20MHz */
#define CLKDEV_INIT 400000 /* 400 KHz */
......
......@@ -59,6 +59,29 @@ struct sh_mmcif_plat_data {
#define MMCIF_CE_HOST_STS2 0x0000004C
#define MMCIF_CE_VERSION 0x0000007C
/* CE_BUF_ACC */
#define BUF_ACC_DMAWEN (1 << 25)
#define BUF_ACC_DMAREN (1 << 24)
#define BUF_ACC_BUSW_32 (0 << 17)
#define BUF_ACC_BUSW_16 (1 << 17)
#define BUF_ACC_ATYP (1 << 16)
/* CE_CLK_CTRL */
#define CLK_ENABLE (1 << 24) /* 1: output mmc clock */
#define CLK_CLEAR ((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16))
#define CLK_SUP_PCLK ((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16))
#define SRSPTO_256 ((1 << 13) | (0 << 12)) /* resp timeout */
#define SRBSYTO_29 ((1 << 11) | (1 << 10) | \
(1 << 9) | (1 << 8)) /* resp busy timeout */
#define SRWDTO_29 ((1 << 7) | (1 << 6) | \
(1 << 5) | (1 << 4)) /* read/write timeout */
#define SCCSTO_29 ((1 << 3) | (1 << 2) | \
(1 << 1) | (1 << 0)) /* ccs timeout */
/* CE_VERSION */
#define SOFT_RST_ON (1 << 31)
#define SOFT_RST_OFF ~SOFT_RST_ON
static inline u32 sh_mmcif_readl(void __iomem *addr, int reg)
{
return readl(addr + reg);
......@@ -149,17 +172,23 @@ static inline void sh_mmcif_boot_init(void __iomem *base)
/* reset */
tmp = sh_mmcif_readl(base, MMCIF_CE_VERSION);
sh_mmcif_writel(base, MMCIF_CE_VERSION, tmp | 0x80000000);
sh_mmcif_writel(base, MMCIF_CE_VERSION, tmp & ~0x80000000);
sh_mmcif_writel(base, MMCIF_CE_VERSION, tmp | SOFT_RST_ON);
sh_mmcif_writel(base, MMCIF_CE_VERSION, tmp & SOFT_RST_OFF);
/* byte swap */
sh_mmcif_writel(base, MMCIF_CE_BUF_ACC, 0x00010000);
sh_mmcif_writel(base, MMCIF_CE_BUF_ACC, BUF_ACC_ATYP);
/* Set block size in MMCIF hardware */
sh_mmcif_writel(base, MMCIF_CE_BLOCK_SET, SH_MMCIF_BBS);
/* Enable the clock, set it to Bus clock/256 (about 325Khz)*/
sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL, 0x01072fff);
/* Enable the clock, set it to Bus clock/256 (about 325Khz).
* It is unclear where 0x70000 comes from or if it is even needed.
* It is there for byte-compatibility with code that is known to
* work.
*/
sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL,
CLK_ENABLE | SRSPTO_256 | SRBSYTO_29 | SRWDTO_29 |
SCCSTO_29 | 0x70000);
/* CMD0 */
sh_mmcif_boot_cmd(base, 0x00000040, 0);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment