Commit da1f5198 authored by Marcel Holtmann's avatar Marcel Holtmann Committed by David S. Miller

[Bluetooth] Correct SCO buffer size on request

This patch introduces a quirk that allows the drivers to tell the host
to correct the SCO buffer size values.
Signed-off-by: default avatarOlivier Galibert <galibert@pobox.com>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
parent dcdcf63e
......@@ -122,6 +122,9 @@ static struct usb_device_id blacklist_ids[] = {
/* RTX Telecom based adapter with buggy SCO support */
{ USB_DEVICE(0x0400, 0x0807), .driver_info = HCI_BROKEN_ISOC },
/* Belkin F8T012 */
{ USB_DEVICE(0x050d, 0x0012), .driver_info = HCI_WRONG_SCO_MTU },
/* Digianswer devices */
{ USB_DEVICE(0x08fd, 0x0001), .driver_info = HCI_DIGIANSWER },
{ USB_DEVICE(0x08fd, 0x0002), .driver_info = HCI_IGNORE },
......@@ -987,6 +990,9 @@ static int hci_usb_probe(struct usb_interface *intf, const struct usb_device_id
if (reset || id->driver_info & HCI_RESET)
set_bit(HCI_QUIRK_RESET_ON_INIT, &hdev->quirks);
if (id->driver_info & HCI_WRONG_SCO_MTU)
set_bit(HCI_QUIRK_FIXUP_BUFFER_SIZE, &hdev->quirks);
if (id->driver_info & HCI_SNIFFER) {
if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x997)
set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
......
......@@ -35,6 +35,7 @@
#define HCI_SNIFFER 0x10
#define HCI_BCM92035 0x20
#define HCI_BROKEN_ISOC 0x40
#define HCI_WRONG_SCO_MTU 0x80
#define HCI_MAX_IFACE_NUM 3
......
......@@ -54,7 +54,8 @@
/* HCI device quirks */
enum {
HCI_QUIRK_RESET_ON_INIT,
HCI_QUIRK_RAW_DEVICE
HCI_QUIRK_RAW_DEVICE,
HCI_QUIRK_FIXUP_BUFFER_SIZE
};
/* HCI device flags */
......
......@@ -319,9 +319,17 @@ static void hci_cc_info_param(struct hci_dev *hdev, __u16 ocf, struct sk_buff *s
}
hdev->acl_mtu = __le16_to_cpu(bs->acl_mtu);
hdev->sco_mtu = bs->sco_mtu ? bs->sco_mtu : 64;
hdev->acl_pkts = hdev->acl_cnt = __le16_to_cpu(bs->acl_max_pkt);
hdev->sco_pkts = hdev->sco_cnt = __le16_to_cpu(bs->sco_max_pkt);
hdev->sco_mtu = bs->sco_mtu;
hdev->acl_pkts = __le16_to_cpu(bs->acl_max_pkt);
hdev->sco_pkts = __le16_to_cpu(bs->sco_max_pkt);
if (test_bit(HCI_QUIRK_FIXUP_BUFFER_SIZE, &hdev->quirks)) {
hdev->sco_mtu = 64;
hdev->sco_pkts = 8;
}
hdev->acl_cnt = hdev->acl_pkts;
hdev->sco_cnt = hdev->sco_pkts;
BT_DBG("%s mtu: acl %d, sco %d max_pkt: acl %d, sco %d", hdev->name,
hdev->acl_mtu, hdev->sco_mtu, hdev->acl_pkts, hdev->sco_pkts);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment