ARM: dts: aspeed: Correctly order UART nodes

Order them all by address.
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>

arch/arm/boot/dts/aspeed-g4.dtsi

@@ -183,6 +183,27 @@ timer: timer@1e782000 {
 				clock-names = "PCLK";
 			};
 
+			uart1: serial@1e783000 {
+				compatible = "ns16550a";
+				reg = <0x1e783000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <9>;
+				clocks = <&clk_uart>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart5: serial@1e784000 {
+				compatible = "ns16550a";
+				reg = <0x1e784000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <10>;
+				clocks = <&clk_uart>;
+				current-speed = <38400>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
 			wdt1: wdt@1e785000 {
 				compatible = "aspeed,ast2400-wdt";
 				reg = <0x1e785000 0x1c>;
@@ -197,11 +218,11 @@ wdt2: wdt@1e785020 {
 				status = "disabled";
 			};
 
-			uart1: serial@1e783000 {
+			uart6: serial@1e787000 {
 				compatible = "ns16550a";
-				reg = <0x1e783000 0x1000>;
+				reg = <0x1e787000 0x1000>;
 				reg-shift = <2>;
-				interrupts = <9>;
+				interrupts = <10>;
 				clocks = <&clk_uart>;
 				no-loopback-test;
 				status = "disabled";
@@ -237,27 +258,6 @@ uart4: serial@1e78f000 {
 				status = "disabled";
 			};
 
-			uart5: serial@1e784000 {
-				compatible = "ns16550a";
-				reg = <0x1e784000 0x1000>;
-				reg-shift = <2>;
-				interrupts = <10>;
-				clocks = <&clk_uart>;
-				current-speed = <38400>;
-				no-loopback-test;
-				status = "disabled";
-			};
-
-			uart6: serial@1e787000 {
-				compatible = "ns16550a";
-				reg = <0x1e787000 0x1000>;
-				reg-shift = <2>;
-				interrupts = <10>;
-				clocks = <&clk_uart>;
-				no-loopback-test;
-				status = "disabled";
-			};
-
 			i2c: i2c@1e78a000 {
 				compatible = "simple-bus";
 				#address-cells = <1>;

arch/arm/boot/dts/aspeed-g5.dtsi

@@ -227,6 +227,26 @@ timer: timer@1e782000 {
 				clock-names = "PCLK";
 			};
 
+			uart1: serial@1e783000 {
+				compatible = "ns16550a";
+				reg = <0x1e783000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <9>;
+				clocks = <&clk_uart>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart5: serial@1e784000 {
+				compatible = "ns16550a";
+				reg = <0x1e784000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <10>;
+				clocks = <&clk_uart>;
+				current-speed = <38400>;
+				no-loopback-test;
+				status = "disabled";
+			};
 
 			wdt1: wdt@1e785000 {
 				compatible = "aspeed,ast2500-wdt";
@@ -247,16 +267,6 @@ wdt3: wdt@1e785040 {
 				status = "disabled";
 			};
 
-			uart1: serial@1e783000 {
-				compatible = "ns16550a";
-				reg = <0x1e783000 0x1000>;
-				reg-shift = <2>;
-				interrupts = <9>;
-				clocks = <&clk_uart>;
-				no-loopback-test;
-				status = "disabled";
-			};
-
 			lpc: lpc@1e789000 {
 				compatible = "aspeed,ast2500-lpc", "simple-mfd";
 				reg = <0x1e789000 0x1000>;
@@ -287,6 +297,16 @@ lhc: lhc@20 {
 				};
 			};
 
+			uart6: serial@1e787000 {
+				compatible = "ns16550a";
+				reg = <0x1e787000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <10>;
+				clocks = <&clk_uart>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
 			uart2: serial@1e78d000 {
 				compatible = "ns16550a";
 				reg = <0x1e78d000 0x1000>;
@@ -317,27 +337,6 @@ uart4: serial@1e78f000 {
 				status = "disabled";
 			};
 
-			uart5: serial@1e784000 {
-				compatible = "ns16550a";
-				reg = <0x1e784000 0x1000>;
-				reg-shift = <2>;
-				interrupts = <10>;
-				clocks = <&clk_uart>;
-				current-speed = <38400>;
-				no-loopback-test;
-				status = "disabled";
-			};
-
-			uart6: serial@1e787000 {
-				compatible = "ns16550a";
-				reg = <0x1e787000 0x1000>;
-				reg-shift = <2>;
-				interrupts = <10>;
-				clocks = <&clk_uart>;
-				no-loopback-test;
-				status = "disabled";
-			};
-
 			i2c: i2c@1e78a000 {
 				compatible = "simple-bus";
 				#address-cells = <1>;