Commit dc1d0f91 authored by Markus Pargmann's avatar Markus Pargmann Committed by Shawn Guo

ARM: dts: imx27 cpufreq-cpu0 frequencies

Set operating-points for imx27. There is no regulator support, so the
voltages are 0. The frequencies should be the same for all imx27 boards,
so it is defined here and can be overwritten if necessary.
Signed-off-by: default avatarMarkus Pargmann <mpa@pengutronix.de>
Acked-by: default avatarSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
parent 6a486b7e
...@@ -49,6 +49,24 @@ osc26m { ...@@ -49,6 +49,24 @@ osc26m {
}; };
}; };
cpus {
#size-cells = <0>;
#address-cells = <1>;
cpu {
device_type = "cpu";
compatible = "arm,arm926ej-s";
operating-points = <
/* kHz uV (No regulator support) */
133000 0
399000 0
>;
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clks 18>;
clock-names = "cpu";
};
};
soc { soc {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment