mfd: sec: Add support for S2MPS14

Add support for S2MPS14 PMIC device to the MFD sec-core driver.
The S2MPS14 is similar to S2MPS11 but it has fewer regulators, two
clocks instead of three and a little different registers layout.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

drivers/mfd/sec-core.c

@@ -27,6 +27,7 @@
 #include <linux/mfd/samsung/irq.h>
 #include <linux/mfd/samsung/rtc.h>
 #include <linux/mfd/samsung/s2mps11.h>
+#include <linux/mfd/samsung/s2mps14.h>
 #include <linux/mfd/samsung/s5m8763.h>
 #include <linux/mfd/samsung/s5m8767.h>
 #include <linux/regmap.h>
@@ -69,6 +70,16 @@ static const struct mfd_cell s2mps11_devs[] = {
 	}
 };
 
+static const struct mfd_cell s2mps14_devs[] = {
+	{
+		.name = "s2mps14-pmic",
+	}, {
+		.name = "s2mps14-rtc",
+	}, {
+		.name = "s2mps14-clk",
+	}
+};
+
 #ifdef CONFIG_OF
 static struct of_device_id sec_dt_match[] = {
 	{	.compatible = "samsung,s5m8767-pmic",
@@ -77,6 +88,9 @@ static struct of_device_id sec_dt_match[] = {
 	{	.compatible = "samsung,s2mps11-pmic",
 		.data = (void *)S2MPS11X,
 	},
+	{	.compatible = "samsung,s2mps14-pmic",
+		.data = (void *)S2MPS14X,
+	},
 	{},
 };
 #endif
@@ -120,6 +134,15 @@ static const struct regmap_config s2mps11_regmap_config = {
 	.cache_type = REGCACHE_FLAT,
 };
 
+static const struct regmap_config s2mps14_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = S2MPS14_REG_LDODSCH3,
+	.volatile_reg = s2mps11_volatile,
+	.cache_type = REGCACHE_FLAT,
+};
+
 static const struct regmap_config s5m8763_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
@@ -138,13 +161,20 @@ static const struct regmap_config s5m8767_regmap_config = {
 	.cache_type = REGCACHE_FLAT,
 };
 
-static const struct regmap_config sec_rtc_regmap_config = {
+static const struct regmap_config s5m_rtc_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
 
 	.max_register = SEC_RTC_REG_MAX,
 };
 
+static const struct regmap_config s2mps14_rtc_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = S2MPS_RTC_REG_MAX,
+};
+
 #ifdef CONFIG_OF
 /*
  * Only the common platform data elements for s5m8767 are parsed here from the
@@ -239,19 +269,23 @@ static int sec_pmic_probe(struct i2c_client *i2c,
 		 * However we must pass something to devm_regmap_init_i2c()
 		 * so use S5M-like regmap config even though it wouldn't work.
 		 */
-		regmap_rtc = &sec_rtc_regmap_config;
+		regmap_rtc = &s5m_rtc_regmap_config;
+		break;
+	case S2MPS14X:
+		regmap = &s2mps14_regmap_config;
+		regmap_rtc = &s2mps14_rtc_regmap_config;
 		break;
 	case S5M8763X:
 		regmap = &s5m8763_regmap_config;
-		regmap_rtc = &sec_rtc_regmap_config;
+		regmap_rtc = &s5m_rtc_regmap_config;
 		break;
 	case S5M8767X:
 		regmap = &s5m8767_regmap_config;
-		regmap_rtc = &sec_rtc_regmap_config;
+		regmap_rtc = &s5m_rtc_regmap_config;
 		break;
 	default:
 		regmap = &sec_regmap_config;
-		regmap_rtc = &sec_rtc_regmap_config;
+		regmap_rtc = &s5m_rtc_regmap_config;
 		break;
 	}
 
@@ -298,6 +332,10 @@ static int sec_pmic_probe(struct i2c_client *i2c,
 		ret = mfd_add_devices(sec_pmic->dev, -1, s2mps11_devs,
 				      ARRAY_SIZE(s2mps11_devs), NULL, 0, NULL);
 		break;
+	case S2MPS14X:
+		ret = mfd_add_devices(sec_pmic->dev, -1, s2mps14_devs,
+				      ARRAY_SIZE(s2mps14_devs), NULL, 0, NULL);
+		break;
 	default:
 		/* If this happens the probe function is problem */
 		BUG();

drivers/mfd/sec-irq.c

 /*
  * sec-irq.c
  *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd
+ * Copyright (c) 2011-2014 Samsung Electronics Co., Ltd
  *              http://www.samsung.com
  *
  *  This program is free software; you can redistribute  it and/or modify it
@@ -19,6 +19,7 @@
 #include <linux/mfd/samsung/core.h>
 #include <linux/mfd/samsung/irq.h>
 #include <linux/mfd/samsung/s2mps11.h>
+#include <linux/mfd/samsung/s2mps14.h>
 #include <linux/mfd/samsung/s5m8763.h>
 #include <linux/mfd/samsung/s5m8767.h>
 
@@ -89,6 +90,76 @@ static const struct regmap_irq s2mps11_irqs[] = {
 	},
 };
 
+static const struct regmap_irq s2mps14_irqs[] = {
+	[S2MPS14_IRQ_PWRONF] = {
+		.reg_offset = 0,
+		.mask = S2MPS11_IRQ_PWRONF_MASK,
+	},
+	[S2MPS14_IRQ_PWRONR] = {
+		.reg_offset = 0,
+		.mask = S2MPS11_IRQ_PWRONR_MASK,
+	},
+	[S2MPS14_IRQ_JIGONBF] = {
+		.reg_offset = 0,
+		.mask = S2MPS11_IRQ_JIGONBF_MASK,
+	},
+	[S2MPS14_IRQ_JIGONBR] = {
+		.reg_offset = 0,
+		.mask = S2MPS11_IRQ_JIGONBR_MASK,
+	},
+	[S2MPS14_IRQ_ACOKBF] = {
+		.reg_offset = 0,
+		.mask = S2MPS11_IRQ_ACOKBF_MASK,
+	},
+	[S2MPS14_IRQ_ACOKBR] = {
+		.reg_offset = 0,
+		.mask = S2MPS11_IRQ_ACOKBR_MASK,
+	},
+	[S2MPS14_IRQ_PWRON1S] = {
+		.reg_offset = 0,
+		.mask = S2MPS11_IRQ_PWRON1S_MASK,
+	},
+	[S2MPS14_IRQ_MRB] = {
+		.reg_offset = 0,
+		.mask = S2MPS11_IRQ_MRB_MASK,
+	},
+	[S2MPS14_IRQ_RTC60S] = {
+		.reg_offset = 1,
+		.mask = S2MPS11_IRQ_RTC60S_MASK,
+	},
+	[S2MPS14_IRQ_RTCA1] = {
+		.reg_offset = 1,
+		.mask = S2MPS11_IRQ_RTCA1_MASK,
+	},
+	[S2MPS14_IRQ_RTCA0] = {
+		.reg_offset = 1,
+		.mask = S2MPS11_IRQ_RTCA0_MASK,
+	},
+	[S2MPS14_IRQ_SMPL] = {
+		.reg_offset = 1,
+		.mask = S2MPS11_IRQ_SMPL_MASK,
+	},
+	[S2MPS14_IRQ_RTC1S] = {
+		.reg_offset = 1,
+		.mask = S2MPS11_IRQ_RTC1S_MASK,
+	},
+	[S2MPS14_IRQ_WTSR] = {
+		.reg_offset = 1,
+		.mask = S2MPS11_IRQ_WTSR_MASK,
+	},
+	[S2MPS14_IRQ_INT120C] = {
+		.reg_offset = 2,
+		.mask = S2MPS11_IRQ_INT120C_MASK,
+	},
+	[S2MPS14_IRQ_INT140C] = {
+		.reg_offset = 2,
+		.mask = S2MPS11_IRQ_INT140C_MASK,
+	},
+	[S2MPS14_IRQ_TSD] = {
+		.reg_offset = 2,
+		.mask = S2MPS14_IRQ_TSD_MASK,
+	},
+};
 
 static const struct regmap_irq s5m8767_irqs[] = {
 	[S5M8767_IRQ_PWRR] = {
@@ -246,6 +317,16 @@ static const struct regmap_irq_chip s2mps11_irq_chip = {
 	.ack_base = S2MPS11_REG_INT1,
 };
 
+static const struct regmap_irq_chip s2mps14_irq_chip = {
+	.name = "s2mps14",
+	.irqs = s2mps14_irqs,
+	.num_irqs = ARRAY_SIZE(s2mps14_irqs),
+	.num_regs = 3,
+	.status_base = S2MPS14_REG_INT1,
+	.mask_base = S2MPS14_REG_INT1M,
+	.ack_base = S2MPS14_REG_INT1,
+};
+
 static const struct regmap_irq_chip s5m8767_irq_chip = {
 	.name = "s5m8767",
 	.irqs = s5m8767_irqs,
@@ -297,6 +378,12 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
 				  sec_pmic->irq_base, &s2mps11_irq_chip,
 				  &sec_pmic->irq_data);
 		break;
+	case S2MPS14X:
+		ret = regmap_add_irq_chip(sec_pmic->regmap_pmic, sec_pmic->irq,
+				  IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				  sec_pmic->irq_base, &s2mps14_irq_chip,
+				  &sec_pmic->irq_data);
+		break;
 	default:
 		dev_err(sec_pmic->dev, "Unknown device type %d\n",
 			sec_pmic->device_type);

include/linux/mfd/samsung/core.h

@@ -19,6 +19,7 @@ enum sec_device_type {
 	S5M8763X,
 	S5M8767X,
 	S2MPS11X,
+	S2MPS14X,
 };
 
 /**

include/linux/mfd/samsung/irq.h

@@ -55,6 +55,33 @@ enum s2mps11_irq {
 #define S2MPS11_IRQ_INT120C_MASK	(1 << 0)
 #define S2MPS11_IRQ_INT140C_MASK	(1 << 1)
 
+enum s2mps14_irq {
+	S2MPS14_IRQ_PWRONF,
+	S2MPS14_IRQ_PWRONR,
+	S2MPS14_IRQ_JIGONBF,
+	S2MPS14_IRQ_JIGONBR,
+	S2MPS14_IRQ_ACOKBF,
+	S2MPS14_IRQ_ACOKBR,
+	S2MPS14_IRQ_PWRON1S,
+	S2MPS14_IRQ_MRB,
+
+	S2MPS14_IRQ_RTC60S,
+	S2MPS14_IRQ_RTCA1,
+	S2MPS14_IRQ_RTCA0,
+	S2MPS14_IRQ_SMPL,
+	S2MPS14_IRQ_RTC1S,
+	S2MPS14_IRQ_WTSR,
+
+	S2MPS14_IRQ_INT120C,
+	S2MPS14_IRQ_INT140C,
+	S2MPS14_IRQ_TSD,
+
+	S2MPS14_IRQ_NR,
+};
+
+/* Masks for interrupts are the same as in s2mps11 */
+#define S2MPS14_IRQ_TSD_MASK		(1 << 2)
+
 enum s5m8767_irq {
 	S5M8767_IRQ_PWRR,
 	S5M8767_IRQ_PWRF,

include/linux/mfd/samsung/rtc.h

 /* rtc.h
  *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd
+ * Copyright (c) 2011-2014 Samsung Electronics Co., Ltd
  *              http://www.samsung.com
  *
  * This program is free software; you can redistribute  it and/or modify it
@@ -8,6 +8,11 @@
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
  */
 
 #ifndef __LINUX_MFD_SEC_RTC_H
@@ -47,6 +52,37 @@ enum sec_rtc_reg {
 	SEC_RTC_REG_MAX,
 };
 
+enum s2mps_rtc_reg {
+	S2MPS_RTC_CTRL,
+	S2MPS_WTSR_SMPL_CNTL,
+	S2MPS_RTC_UDR_CON,
+	S2MPS_RSVD,
+	S2MPS_RTC_SEC,
+	S2MPS_RTC_MIN,
+	S2MPS_RTC_HOUR,
+	S2MPS_RTC_WEEKDAY,
+	S2MPS_RTC_DATE,
+	S2MPS_RTC_MONTH,
+	S2MPS_RTC_YEAR,
+	S2MPS_ALARM0_SEC,
+	S2MPS_ALARM0_MIN,
+	S2MPS_ALARM0_HOUR,
+	S2MPS_ALARM0_WEEKDAY,
+	S2MPS_ALARM0_DATE,
+	S2MPS_ALARM0_MONTH,
+	S2MPS_ALARM0_YEAR,
+	S2MPS_ALARM1_SEC,
+	S2MPS_ALARM1_MIN,
+	S2MPS_ALARM1_HOUR,
+	S2MPS_ALARM1_WEEKDAY,
+	S2MPS_ALARM1_DATE,
+	S2MPS_ALARM1_MONTH,
+	S2MPS_ALARM1_YEAR,
+	S2MPS_OFFSRC,
+
+	S2MPS_RTC_REG_MAX,
+};
+
 #define RTC_I2C_ADDR		(0x0C >> 1)
 
 #define HOUR_12			(1 << 7)
@@ -56,6 +92,9 @@ enum sec_rtc_reg {
 #define ALARM1_STATUS		(1 << 2)
 #define UPDATE_AD		(1 << 0)
 
+#define S2MPS_ALARM0_STATUS	(1 << 2)
+#define S2MPS_ALARM1_STATUS	(1 << 1)
+
 /* RTC Control Register */
 #define BCD_EN_SHIFT		0
 #define BCD_EN_MASK		(1 << BCD_EN_SHIFT)
@@ -64,6 +103,10 @@ enum sec_rtc_reg {
 /* RTC Update Register1 */
 #define RTC_UDR_SHIFT		0
 #define RTC_UDR_MASK		(1 << RTC_UDR_SHIFT)
+#define S2MPS_RTC_WUDR_SHIFT	4
+#define S2MPS_RTC_WUDR_MASK	(1 << S2MPS_RTC_WUDR_SHIFT)
+#define S2MPS_RTC_RUDR_SHIFT	0
+#define S2MPS_RTC_RUDR_MASK	(1 << S2MPS_RTC_RUDR_SHIFT)
 #define RTC_TCON_SHIFT		1
 #define RTC_TCON_MASK		(1 << RTC_TCON_SHIFT)
 #define RTC_TIME_EN_SHIFT	3

include/linux/mfd/samsung/s2mps14.h

+/*
+ * s2mps14.h
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd
+ *              http://www.samsung.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __LINUX_MFD_S2MPS14_H
+#define __LINUX_MFD_S2MPS14_H
+
+/* S2MPS14 registers */
+enum s2mps14_reg {
+	S2MPS14_REG_ID,
+	S2MPS14_REG_INT1,
+	S2MPS14_REG_INT2,
+	S2MPS14_REG_INT3,
+	S2MPS14_REG_INT1M,
+	S2MPS14_REG_INT2M,
+	S2MPS14_REG_INT3M,
+	S2MPS14_REG_ST1,
+	S2MPS14_REG_ST2,
+	S2MPS14_REG_PWRONSRC,
+	S2MPS14_REG_OFFSRC,
+	S2MPS14_REG_BU_CHG,
+	S2MPS14_REG_RTCCTRL,
+	S2MPS14_REG_CTRL1,
+	S2MPS14_REG_CTRL2,
+	S2MPS14_REG_RSVD1,
+	S2MPS14_REG_RSVD2,
+	S2MPS14_REG_RSVD3,
+	S2MPS14_REG_RSVD4,
+	S2MPS14_REG_RSVD5,
+	S2MPS14_REG_RSVD6,
+	S2MPS14_REG_CTRL3,
+	S2MPS14_REG_RSVD7,
+	S2MPS14_REG_RSVD8,
+	S2MPS14_REG_WRSTBI,
+	S2MPS14_REG_B1CTRL1,
+	S2MPS14_REG_B1CTRL2,
+	S2MPS14_REG_B2CTRL1,
+	S2MPS14_REG_B2CTRL2,
+	S2MPS14_REG_B3CTRL1,
+	S2MPS14_REG_B3CTRL2,
+	S2MPS14_REG_B4CTRL1,
+	S2MPS14_REG_B4CTRL2,
+	S2MPS14_REG_B5CTRL1,
+	S2MPS14_REG_B5CTRL2,
+	S2MPS14_REG_L1CTRL,
+	S2MPS14_REG_L2CTRL,
+	S2MPS14_REG_L3CTRL,
+	S2MPS14_REG_L4CTRL,
+	S2MPS14_REG_L5CTRL,
+	S2MPS14_REG_L6CTRL,
+	S2MPS14_REG_L7CTRL,
+	S2MPS14_REG_L8CTRL,
+	S2MPS14_REG_L9CTRL,
+	S2MPS14_REG_L10CTRL,
+	S2MPS14_REG_L11CTRL,
+	S2MPS14_REG_L12CTRL,
+	S2MPS14_REG_L13CTRL,
+	S2MPS14_REG_L14CTRL,
+	S2MPS14_REG_L15CTRL,
+	S2MPS14_REG_L16CTRL,
+	S2MPS14_REG_L17CTRL,
+	S2MPS14_REG_L18CTRL,
+	S2MPS14_REG_L19CTRL,
+	S2MPS14_REG_L20CTRL,
+	S2MPS14_REG_L21CTRL,
+	S2MPS14_REG_L22CTRL,
+	S2MPS14_REG_L23CTRL,
+	S2MPS14_REG_L24CTRL,
+	S2MPS14_REG_L25CTRL,
+	S2MPS14_REG_LDODSCH1,
+	S2MPS14_REG_LDODSCH2,
+	S2MPS14_REG_LDODSCH3,
+};
+
+/* S2MPS14 regulator ids */
+enum s2mps14_regulators {
+	S2MPS14_LDO1,
+	S2MPS14_LDO2,
+	S2MPS14_LDO3,
+	S2MPS14_LDO4,
+	S2MPS14_LDO5,
+	S2MPS14_LDO6,
+	S2MPS14_LDO7,
+	S2MPS14_LDO8,
+	S2MPS14_LDO9,
+	S2MPS14_LDO10,
+	S2MPS14_LDO11,
+	S2MPS14_LDO12,
+	S2MPS14_LDO13,
+	S2MPS14_LDO14,
+	S2MPS14_LDO15,
+	S2MPS14_LDO16,
+	S2MPS14_LDO17,
+	S2MPS14_LDO18,
+	S2MPS14_LDO19,
+	S2MPS14_LDO20,
+	S2MPS14_LDO21,
+	S2MPS14_LDO22,
+	S2MPS14_LDO23,
+	S2MPS14_LDO24,
+	S2MPS14_LDO25,
+	S2MPS14_BUCK1,
+	S2MPS14_BUCK2,
+	S2MPS14_BUCK3,
+	S2MPS14_BUCK4,
+	S2MPS14_BUCK5,
+
+	S2MPS14_REGULATOR_MAX,
+};
+
+/* Regulator constraints for BUCKx */
+#define S2MPS14_BUCK1235_MIN_600MV	600000
+#define S2MPS14_BUCK4_MIN_1400MV	1400000
+#define S2MPS14_BUCK1235_STEP_6_25MV	6250
+#define S2MPS14_BUCK4_STEP_12_5MV	12500
+#define S2MPS14_BUCK1235_START_SEL	0x20
+#define S2MPS14_BUCK4_START_SEL		0x40
+/*
+ * Default ramp delay in uv/us. Datasheet says that ramp delay can be
+ * controlled however it does not specify which register is used for that.
+ * Let's assume that default value will be set.
+ */
+#define S2MPS14_BUCK_RAMP_DELAY		12500
+
+/* Regulator constraints for different types of LDOx */
+#define S2MPS14_LDO_MIN_800MV		800000
+#define S2MPS14_LDO_MIN_1800MV		1800000
+#define S2MPS14_LDO_STEP_12_5MV		12500
+#define S2MPS14_LDO_STEP_25MV		25000
+
+#define S2MPS14_LDO_VSEL_MASK		0x3F
+#define S2MPS14_BUCK_VSEL_MASK		0xFF
+#define S2MPS14_ENABLE_MASK		(0x03 << S2MPS14_ENABLE_SHIFT)
+#define S2MPS14_ENABLE_SHIFT		6
+#define S2MPS14_LDO_N_VOLTAGES		(S2MPS14_LDO_VSEL_MASK + 1)
+#define S2MPS14_BUCK_N_VOLTAGES		(S2MPS14_BUCK_VSEL_MASK + 1)
+
+#endif /*  __LINUX_MFD_S2MPS14_H */