Skip to content

L
linux
Commit de8e71ca authored by Russell King's avatar Russell King
Browse files
Options

ARM: pm: only use preallocated page table during resume 

Only use the preallocated page table during the resume, not while
suspending.  This avoids the overhead of having to switch unnecessarily
to the resume page table in the suspend path.
Tested-by: default avatarSantosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: default avatarShawn Guo <shawn.guo@linaro.org>
Tested-by: default avatarLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent e8ce0eb5
Show whitespace changes
Inline Side-by-side
Showing with 99 additions and 99 deletions
arch/arm/kernel/sleep.S
View file @ de8e71ca
......@@ -9,12 +9,14 @@
/*
* Save CPU state for a suspend
* r0 = phys addr of temporary page tables
* r1 = v:p offset
* r2 = suspend function arg0
* r3 = suspend function
*/
ENTRY(__cpu_suspend)
stmfd sp!, {r4 - r11, lr}
mov r4, r0
#ifdef MULTI_CPU
ldr r10, =processor
ldr r5, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state
......@@ -27,7 +29,7 @@ ENTRY(__cpu_suspend)
sub sp, sp, r5 @ allocate CPU state on stack
mov r0, sp @ save pointer to CPU save block
add ip, ip, r1 @ convert resume fn to phys
stmfd sp!, {r6, ip} @ save virt SP, phys resume fn
stmfd sp!, {r4, r6, ip} @ save phys pgd, virt SP, phys resume fn
ldr r5, =sleep_save_sp
add r6, sp, r1 @ convert SP to phys
stmfd sp!, {r2, r3} @ save suspend func arg and pointer
......@@ -60,7 +62,7 @@ ENDPROC(__cpu_suspend)
.ltorg
cpu_suspend_abort:
ldmia sp!, {r2 - r3} @ pop virt SP, phys resume fn
ldmia sp!, {r1 - r3} @ pop phys pgd, virt SP, phys resume fn
teq r0, #0
moveq r0, #1 @ force non-zero value
mov sp, r2
......@@ -69,9 +71,6 @@ ENDPROC(cpu_suspend_abort)
/*
* r0 = control register value
* r1 = v:p offset (preserved by cpu_do_resume)
* r2 = phys page table base
* r3 = L1 section flags
*/
ENTRY(cpu_resume_mmu)
ldr r3, =cpu_resume_after_mmu
......@@ -112,9 +111,9 @@ ENTRY(cpu_resume)
ldr r0, sleep_save_sp @ stack phys addr
#endif
setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r1 @ set SVC, irqs off
@ load stack, resume fn
ARM( ldmia r0!, {sp, pc} )
THUMB( ldmia r0!, {r2, r3} )
@ load phys pgd, stack, resume fn
ARM( ldmia r0!, {r1, sp, pc} )
THUMB( ldmia r0!, {r1, r2, r3} )
THUMB( mov sp, r2 )
THUMB( bx r3 )
ENDPROC(cpu_resume)
......
arch/arm/kernel/suspend.c
View file @ de8e71ca
......@@ -24,14 +24,17 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
return -EINVAL;
/*
* Temporarily switch the page tables to our suspend page
* tables, which contain the temporary identity mapping
* required for resuming.
* Provide a temporary page table with an identity mapping for
* the MMU-enable code, required for resuming. On successful
* resume (indicated by a zero return code), we need to switch
* back to the correct page tables.
*/
cpu_switch_mm(suspend_pgd, mm);
ret = __cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, arg, fn);
ret = __cpu_suspend(virt_to_phys(suspend_pgd),
PHYS_OFFSET - PAGE_OFFSET, arg, fn);
if (ret == 0) {
cpu_switch_mm(mm->pgd, mm);
local_flush_tlb_all();
}
return ret;
}
......
arch/arm/mm/proc-arm920.S
View file @ de8e71ca
......@@ -379,27 +379,26 @@ ENTRY(cpu_arm920_set_pte_ext)
/* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
.globl cpu_arm920_suspend_size
.equ cpu_arm920_suspend_size, 4 * 4
.equ cpu_arm920_suspend_size, 4 * 3
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_arm920_do_suspend)
stmfd sp!, {r4 - r7, lr}
stmfd sp!, {r4 - r6, lr}
mrc p15, 0, r4, c13, c0, 0 @ PID
mrc p15, 0, r5, c3, c0, 0 @ Domain ID
mrc p15, 0, r6, c2, c0, 0 @ TTB address
mrc p15, 0, r7, c1, c0, 0 @ Control register
stmia r0, {r4 - r7}
ldmfd sp!, {r4 - r7, pc}
mrc p15, 0, r6, c1, c0, 0 @ Control register
stmia r0, {r4 - r6}
ldmfd sp!, {r4 - r6, pc}
ENDPROC(cpu_arm920_do_suspend)
ENTRY(cpu_arm920_do_resume)
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ invalidate I+D TLBs
mcr p15, 0, ip, c7, c7, 0 @ invalidate I+D caches
ldmia r0, {r4 - r7}
ldmia r0, {r4 - r6}
mcr p15, 0, r4, c13, c0, 0 @ PID
mcr p15, 0, r5, c3, c0, 0 @ Domain ID
mcr p15, 0, r6, c2, c0, 0 @ TTB address
mov r0, r7 @ control register
mcr p15, 0, r1, c2, c0, 0 @ TTB address
mov r0, r6 @ control register
b cpu_resume_mmu
ENDPROC(cpu_arm920_do_resume)
#endif
......
arch/arm/mm/proc-arm926.S
View file @ de8e71ca
......@@ -394,27 +394,26 @@ ENTRY(cpu_arm926_set_pte_ext)
/* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
.globl cpu_arm926_suspend_size
.equ cpu_arm926_suspend_size, 4 * 4
.equ cpu_arm926_suspend_size, 4 * 3
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_arm926_do_suspend)
stmfd sp!, {r4 - r7, lr}
stmfd sp!, {r4 - r6, lr}
mrc p15, 0, r4, c13, c0, 0 @ PID
mrc p15, 0, r5, c3, c0, 0 @ Domain ID
mrc p15, 0, r6, c2, c0, 0 @ TTB address
mrc p15, 0, r7, c1, c0, 0 @ Control register
stmia r0, {r4 - r7}
ldmfd sp!, {r4 - r7, pc}
mrc p15, 0, r6, c1, c0, 0 @ Control register
stmia r0, {r4 - r6}
ldmfd sp!, {r4 - r6, pc}
ENDPROC(cpu_arm926_do_suspend)
ENTRY(cpu_arm926_do_resume)
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ invalidate I+D TLBs
mcr p15, 0, ip, c7, c7, 0 @ invalidate I+D caches
ldmia r0, {r4 - r7}
ldmia r0, {r4 - r6}
mcr p15, 0, r4, c13, c0, 0 @ PID
mcr p15, 0, r5, c3, c0, 0 @ Domain ID
mcr p15, 0, r6, c2, c0, 0 @ TTB address
mov r0, r7 @ control register
mcr p15, 0, r1, c2, c0, 0 @ TTB address
mov r0, r6 @ control register
b cpu_resume_mmu
ENDPROC(cpu_arm926_do_resume)
#endif
......
arch/arm/mm/proc-sa1100.S
View file @ de8e71ca
......@@ -168,20 +168,19 @@ ENTRY(cpu_sa1100_set_pte_ext)
mov pc, lr
.globl cpu_sa1100_suspend_size
.equ cpu_sa1100_suspend_size, 4*4
.equ cpu_sa1100_suspend_size, 4 * 3
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_sa1100_do_suspend)
stmfd sp!, {r4 - r7, lr}
stmfd sp!, {r4 - r6, lr}
mrc p15, 0, r4, c3, c0, 0 @ domain ID
mrc p15, 0, r5, c2, c0, 0 @ translation table base addr
mrc p15, 0, r6, c13, c0, 0 @ PID
mrc p15, 0, r7, c1, c0, 0 @ control reg
stmia r0, {r4 - r7} @ store cp regs
ldmfd sp!, {r4 - r7, pc}
mrc p15, 0, r5, c13, c0, 0 @ PID
mrc p15, 0, r6, c1, c0, 0 @ control reg
stmia r0, {r4 - r6} @ store cp regs
ldmfd sp!, {r4 - r6, pc}
ENDPROC(cpu_sa1100_do_suspend)
ENTRY(cpu_sa1100_do_resume)
ldmia r0, {r4 - r7} @ load cp regs
ldmia r0, {r4 - r6} @ load cp regs
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ flush I+D TLBs
mcr p15, 0, ip, c7, c7, 0 @ flush I&D cache
......@@ -189,9 +188,9 @@ ENTRY(cpu_sa1100_do_resume)
mcr p15, 0, ip, c9, c0, 5 @ allow user space to use RB
mcr p15, 0, r4, c3, c0, 0 @ domain ID
mcr p15, 0, r5, c2, c0, 0 @ translation table base addr
mcr p15, 0, r6, c13, c0, 0 @ PID
mov r0, r7 @ control register
mcr p15, 0, r1, c2, c0, 0 @ translation table base addr
mcr p15, 0, r5, c13, c0, 0 @ PID
mov r0, r6 @ control register
b cpu_resume_mmu
ENDPROC(cpu_sa1100_do_resume)
#endif
......
arch/arm/mm/proc-v6.S
View file @ de8e71ca
......@@ -128,20 +128,19 @@ ENTRY(cpu_v6_set_pte_ext)
/* Suspend/resume support: taken from arch/arm/mach-s3c64xx/sleep.S */
.globl cpu_v6_suspend_size
.equ cpu_v6_suspend_size, 4 * 8
.equ cpu_v6_suspend_size, 4 * 7
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_v6_do_suspend)
stmfd sp!, {r4 - r11, lr}
stmfd sp!, {r4 - r10, lr}
mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
mrc p15, 0, r5, c13, c0, 1 @ Context ID
mrc p15, 0, r6, c3, c0, 0 @ Domain ID
mrc p15, 0, r7, c2, c0, 0 @ Translation table base 0
mrc p15, 0, r8, c2, c0, 1 @ Translation table base 1
mrc p15, 0, r9, c1, c0, 1 @ auxiliary control register
mrc p15, 0, r10, c1, c0, 2 @ co-processor access control
mrc p15, 0, r11, c1, c0, 0 @ control register
stmia r0, {r4 - r11}
ldmfd sp!, {r4- r11, pc}
mrc p15, 0, r7, c2, c0, 1 @ Translation table base 1
mrc p15, 0, r8, c1, c0, 1 @ auxiliary control register
mrc p15, 0, r9, c1, c0, 2 @ co-processor access control
mrc p15, 0, r10, c1, c0, 0 @ control register
stmia r0, {r4 - r10}
ldmfd sp!, {r4- r10, pc}
ENDPROC(cpu_v6_do_suspend)
ENTRY(cpu_v6_do_resume)
......@@ -150,17 +149,19 @@ ENTRY(cpu_v6_do_resume)
mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
mcr p15, 0, ip, c7, c15, 0 @ clean+invalidate cache
mcr p15, 0, ip, c7, c10, 4 @ drain write buffer
ldmia r0, {r4 - r11}
ldmia r0, {r4 - r10}
mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
mcr p15, 0, r5, c13, c0, 1 @ Context ID
mcr p15, 0, r6, c3, c0, 0 @ Domain ID
mcr p15, 0, r7, c2, c0, 0 @ Translation table base 0
mcr p15, 0, r8, c2, c0, 1 @ Translation table base 1
mcr p15, 0, r9, c1, c0, 1 @ auxiliary control register
mcr p15, 0, r10, c1, c0, 2 @ co-processor access control
ALT_SMP(orr r1, r1, #TTB_FLAGS_SMP)
ALT_UP(orr r1, r1, #TTB_FLAGS_UP)
mcr p15, 0, r1, c2, c0, 0 @ Translation table base 0
mcr p15, 0, r7, c2, c0, 1 @ Translation table base 1
mcr p15, 0, r8, c1, c0, 1 @ auxiliary control register
mcr p15, 0, r9, c1, c0, 2 @ co-processor access control
mcr p15, 0, ip, c2, c0, 2 @ TTB control register
mcr p15, 0, ip, c7, c5, 4 @ ISB
mov r0, r11 @ control register
mov r0, r10 @ control register
b cpu_resume_mmu
ENDPROC(cpu_v6_do_resume)
#endif
......
arch/arm/mm/proc-v7.S
View file @ de8e71ca
......@@ -217,22 +217,21 @@ ENDPROC(cpu_v7_set_pte_ext)
/* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */
.globl cpu_v7_suspend_size
.equ cpu_v7_suspend_size, 4 * 9
.equ cpu_v7_suspend_size, 4 * 8
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_v7_do_suspend)
stmfd sp!, {r4 - r11, lr}
stmfd sp!, {r4 - r10, lr}
mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
mrc p15, 0, r5, c13, c0, 1 @ Context ID
mrc p15, 0, r6, c13, c0, 3 @ User r/o thread ID
stmia r0!, {r4 - r6}
mrc p15, 0, r6, c3, c0, 0 @ Domain ID
mrc p15, 0, r7, c2, c0, 0 @ TTB 0
mrc p15, 0, r8, c2, c0, 1 @ TTB 1
mrc p15, 0, r9, c1, c0, 0 @ Control register
mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register
mrc p15, 0, r11, c1, c0, 2 @ Co-processor access control
stmia r0, {r6 - r11}
ldmfd sp!, {r4 - r11, pc}
mrc p15, 0, r7, c2, c0, 1 @ TTB 1
mrc p15, 0, r8, c1, c0, 0 @ Control register
mrc p15, 0, r9, c1, c0, 1 @ Auxiliary control register
mrc p15, 0, r10, c1, c0, 2 @ Co-processor access control
stmia r0, {r6 - r10}
ldmfd sp!, {r4 - r10, pc}
ENDPROC(cpu_v7_do_suspend)
ENTRY(cpu_v7_do_resume)
......@@ -243,22 +242,24 @@ ENTRY(cpu_v7_do_resume)
mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
mcr p15, 0, r5, c13, c0, 1 @ Context ID
mcr p15, 0, r6, c13, c0, 3 @ User r/o thread ID
ldmia r0, {r6 - r11}
ldmia r0, {r6 - r10}
mcr p15, 0, r6, c3, c0, 0 @ Domain ID
mcr p15, 0, r7, c2, c0, 0 @ TTB 0
mcr p15, 0, r8, c2, c0, 1 @ TTB 1
ALT_SMP(orr r1, r1, #TTB_FLAGS_SMP)
ALT_UP(orr r1, r1, #TTB_FLAGS_UP)
mcr p15, 0, r1, c2, c0, 0 @ TTB 0
mcr p15, 0, r7, c2, c0, 1 @ TTB 1
mcr p15, 0, ip, c2, c0, 2 @ TTB control register
mrc p15, 0, r4, c1, c0, 1 @ Read Auxiliary control register
teq r4, r10 @ Is it already set?
mcrne p15, 0, r10, c1, c0, 1 @ No, so write it
mcr p15, 0, r11, c1, c0, 2 @ Co-processor access control
teq r4, r9 @ Is it already set?
mcrne p15, 0, r9, c1, c0, 1 @ No, so write it
mcr p15, 0, r10, c1, c0, 2 @ Co-processor access control
ldr r4, =PRRR @ PRRR
ldr r5, =NMRR @ NMRR
mcr p15, 0, r4, c10, c2, 0 @ write PRRR
mcr p15, 0, r5, c10, c2, 1 @ write NMRR
isb
dsb
mov r0, r9 @ control register
mov r0, r8 @ control register
b cpu_resume_mmu
ENDPROC(cpu_v7_do_resume)
#endif
......
arch/arm/mm/proc-xsc3.S
View file @ de8e71ca
......@@ -406,24 +406,23 @@ ENTRY(cpu_xsc3_set_pte_ext)
.align
.globl cpu_xsc3_suspend_size
.equ cpu_xsc3_suspend_size, 4 * 7
.equ cpu_xsc3_suspend_size, 4 * 6
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_xsc3_do_suspend)
stmfd sp!, {r4 - r10, lr}
stmfd sp!, {r4 - r9, lr}
mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode
mrc p15, 0, r5, c15, c1, 0 @ CP access reg
mrc p15, 0, r6, c13, c0, 0 @ PID
mrc p15, 0, r7, c3, c0, 0 @ domain ID
mrc p15, 0, r8, c2, c0, 0 @ translation table base addr
mrc p15, 0, r9, c1, c0, 1 @ auxiliary control reg
mrc p15, 0, r10, c1, c0, 0 @ control reg
mrc p15, 0, r8, c1, c0, 1 @ auxiliary control reg
mrc p15, 0, r9, c1, c0, 0 @ control reg
bic r4, r4, #2 @ clear frequency change bit
stmia r0, {r4 - r10} @ store cp regs
ldmia sp!, {r4 - r10, pc}
stmia r0, {r4 - r9} @ store cp regs
ldmia sp!, {r4 - r9, pc}
ENDPROC(cpu_xsc3_do_suspend)
ENTRY(cpu_xsc3_do_resume)
ldmia r0, {r4 - r10} @ load cp regs
ldmia r0, {r4 - r9} @ load cp regs
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB
mcr p15, 0, ip, c7, c10, 4 @ drain write (&fill) buffer
......@@ -433,9 +432,10 @@ ENTRY(cpu_xsc3_do_resume)
mcr p15, 0, r5, c15, c1, 0 @ CP access reg
mcr p15, 0, r6, c13, c0, 0 @ PID
mcr p15, 0, r7, c3, c0, 0 @ domain ID
mcr p15, 0, r8, c2, c0, 0 @ translation table base addr
mcr p15, 0, r9, c1, c0, 1 @ auxiliary control reg
mov r0, r10 @ control register
orr r1, r1, #0x18 @ cache the page table in L2
mcr p15, 0, r1, c2, c0, 0 @ translation table base addr
mcr p15, 0, r8, c1, c0, 1 @ auxiliary control reg
mov r0, r9 @ control register
b cpu_resume_mmu
ENDPROC(cpu_xsc3_do_resume)
#endif
......
arch/arm/mm/proc-xscale.S
View file @ de8e71ca
......@@ -520,24 +520,23 @@ ENTRY(cpu_xscale_set_pte_ext)
.align
.globl cpu_xscale_suspend_size
.equ cpu_xscale_suspend_size, 4 * 7
.equ cpu_xscale_suspend_size, 4 * 6
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_xscale_do_suspend)
stmfd sp!, {r4 - r10, lr}
stmfd sp!, {r4 - r9, lr}
mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode
mrc p15, 0, r5, c15, c1, 0 @ CP access reg
mrc p15, 0, r6, c13, c0, 0 @ PID
mrc p15, 0, r7, c3, c0, 0 @ domain ID
mrc p15, 0, r8, c2, c0, 0 @ translation table base addr
mrc p15, 0, r9, c1, c1, 0 @ auxiliary control reg
mrc p15, 0, r10, c1, c0, 0 @ control reg
mrc p15, 0, r8, c1, c1, 0 @ auxiliary control reg
mrc p15, 0, r9, c1, c0, 0 @ control reg
bic r4, r4, #2 @ clear frequency change bit
stmia r0, {r4 - r10} @ store cp regs
ldmfd sp!, {r4 - r10, pc}
stmia r0, {r4 - r9} @ store cp regs
ldmfd sp!, {r4 - r9, pc}
ENDPROC(cpu_xscale_do_suspend)
ENTRY(cpu_xscale_do_resume)
ldmia r0, {r4 - r10} @ load cp regs
ldmia r0, {r4 - r9} @ load cp regs
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB
......@@ -545,9 +544,9 @@ ENTRY(cpu_xscale_do_resume)
mcr p15, 0, r5, c15, c1, 0 @ CP access reg
mcr p15, 0, r6, c13, c0, 0 @ PID
mcr p15, 0, r7, c3, c0, 0 @ domain ID
mcr p15, 0, r8, c2, c0, 0 @ translation table base addr
mcr p15, 0, r9, c1, c1, 0 @ auxiliary control reg
mov r0, r10 @ control register
mcr p15, 0, r1, c2, c0, 0 @ translation table base addr
mcr p15, 0, r8, c1, c1, 0 @ auxiliary control reg
mov r0, r9 @ control register
b cpu_resume_mmu
ENDPROC(cpu_xscale_do_resume)
#endif
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7