usb: phy: fix return value check of usb_get_phy

usb_get_phy will return -ENODEV if it's not able to find the phy. Hence
fixed all the callers of usb_get_phy to check for this error condition
instead of relying on a non-zero value as success condition.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

drivers/power/ab8500_charger.c

@@ -2689,7 +2689,7 @@ static int __devinit ab8500_charger_probe(struct platform_device *pdev)
 	}
 
 	di->usb_phy = usb_get_phy(USB_PHY_TYPE_USB2);
-	if (!di->usb_phy) {
+	if (IS_ERR_OR_NULL(di->usb_phy)) {
 		dev_err(di->dev, "failed to get usb transceiver\n");
 		ret = -EINVAL;
 		goto free_usb;

drivers/power/isp1704_charger.c

@@ -416,7 +416,7 @@ static int __devinit isp1704_charger_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	isp->phy = usb_get_phy(USB_PHY_TYPE_USB2);
-	if (!isp->phy)
+	if (IS_ERR_OR_NULL(isp->phy))
 		goto fail0;
 
 	isp->dev = &pdev->dev;

drivers/power/pda_power.c

@@ -322,10 +322,10 @@ static int pda_power_probe(struct platform_device *pdev)
 
 #ifdef CONFIG_USB_OTG_UTILS
 	transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
-	if (transceiver && !pdata->is_usb_online) {
+	if (!IS_ERR_OR_NULL(transceiver)) {
+		if (!pdata->is_usb_online)
 			pdata->is_usb_online = otg_is_usb_online;
-	}
-	if (transceiver && !pdata->is_ac_online) {
+		if (!pdata->is_ac_online)
 			pdata->is_ac_online = otg_is_ac_online;
 	}
 #endif
@@ -373,7 +373,7 @@ static int pda_power_probe(struct platform_device *pdev)
 	}
 
 #ifdef CONFIG_USB_OTG_UTILS
-	if (transceiver && pdata->use_otg_notifier) {
+	if (!IS_ERR_OR_NULL(transceiver) && pdata->use_otg_notifier) {
 		otg_nb.notifier_call = otg_handle_notification;
 		ret = usb_register_notifier(transceiver, &otg_nb);
 		if (ret) {
@@ -408,7 +408,7 @@ static int pda_power_probe(struct platform_device *pdev)
 	if (pdata->is_ac_online && ac_irq)
 		free_irq(ac_irq->start, &pda_psy_ac);
 #ifdef CONFIG_USB_OTG_UTILS
-	if (transceiver)
+	if (!IS_ERR_OR_NULL(transceiver))
 		usb_put_phy(transceiver);
 #endif
 ac_irq_failed:
@@ -443,7 +443,7 @@ static int pda_power_remove(struct platform_device *pdev)
 	if (pdata->is_ac_online)
 		power_supply_unregister(&pda_psy_ac);
 #ifdef CONFIG_USB_OTG_UTILS
-	if (transceiver)
+	if (!IS_ERR_OR_NULL(transceiver))
 		usb_put_phy(transceiver);
 #endif
 	if (ac_draw) {

drivers/power/twl4030_charger.c

@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/slab.h>
+#include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/i2c/twl.h>
@@ -480,7 +481,7 @@ static int __init twl4030_bci_probe(struct platform_device *pdev)
 	INIT_WORK(&bci->work, twl4030_bci_usb_work);
 
 	bci->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
-	if (bci->transceiver != NULL) {
+	if (!IS_ERR_OR_NULL(bci->transceiver)) {
 		bci->usb_nb.notifier_call = twl4030_bci_usb_ncb;
 		usb_register_notifier(bci->transceiver, &bci->usb_nb);
 	}
@@ -507,7 +508,7 @@ static int __init twl4030_bci_probe(struct platform_device *pdev)
 	return 0;
 
 fail_unmask_interrupts:
-	if (bci->transceiver != NULL) {
+	if (!IS_ERR_OR_NULL(bci->transceiver)) {
 		usb_unregister_notifier(bci->transceiver, &bci->usb_nb);
 		usb_put_phy(bci->transceiver);
 	}
@@ -538,7 +539,7 @@ static int __exit twl4030_bci_remove(struct platform_device *pdev)
 	twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff,
 			 TWL4030_INTERRUPTS_BCIIMR2A);
 
-	if (bci->transceiver != NULL) {
+	if (!IS_ERR_OR_NULL(bci->transceiver)) {
 		usb_unregister_notifier(bci->transceiver, &bci->usb_nb);
 		usb_put_phy(bci->transceiver);
 	}

drivers/usb/chipidea/udc.c

@@ -14,6 +14,7 @@
 #include <linux/device.h>
 #include <linux/dmapool.h>
 #include <linux/dma-mapping.h>
+#include <linux/err.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/module.h>
@@ -1712,7 +1713,7 @@ static int udc_start(struct ci13xxx *udc)
 	if (retval)
 		goto unreg_device;
 
-	if (udc->transceiver) {
+	if (!IS_ERR_OR_NULL(udc->transceiver)) {
 		retval = otg_set_peripheral(udc->transceiver->otg,
 						&udc->gadget);
 		if (retval)
@@ -1729,7 +1730,7 @@ static int udc_start(struct ci13xxx *udc)
 	return retval;
 
 remove_trans:
-	if (udc->transceiver) {
+	if (!IS_ERR_OR_NULL(udc->transceiver)) {
 		otg_set_peripheral(udc->transceiver->otg, &udc->gadget);
 		usb_put_phy(udc->transceiver);
 	}
@@ -1740,7 +1741,7 @@ static int udc_start(struct ci13xxx *udc)
 unreg_device:
 	device_unregister(&udc->gadget.dev);
 put_transceiver:
-	if (udc->transceiver)
+	if (!IS_ERR_OR_NULL(udc->transceiver))
 		usb_put_phy(udc->transceiver);
 free_pools:
 	dma_pool_destroy(udc->td_pool);
@@ -1772,7 +1773,7 @@ static void udc_stop(struct ci13xxx *udc)
 	dma_pool_destroy(udc->td_pool);
 	dma_pool_destroy(udc->qh_pool);
 
-	if (udc->transceiver) {
+	if (!IS_ERR_OR_NULL(udc->transceiver)) {
 		otg_set_peripheral(udc->transceiver->otg, NULL);
 		usb_put_phy(udc->transceiver);
 	}

drivers/usb/gadget/fsl_udc_core.c

@@ -24,6 +24,7 @@
 #include <linux/ioport.h>
 #include <linux/types.h>
 #include <linux/errno.h>
+#include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/list.h>
@@ -1229,7 +1230,7 @@ static int fsl_vbus_draw(struct usb_gadget *gadget, unsigned mA)
 	struct fsl_udc *udc;
 
 	udc = container_of(gadget, struct fsl_udc, gadget);
-	if (udc->transceiver)
+	if (!IS_ERR_OR_NULL(udc->transceiver))
 		return usb_phy_set_power(udc->transceiver, mA);
 	return -ENOTSUPP;
 }
@@ -1983,13 +1984,13 @@ static int fsl_start(struct usb_gadget_driver *driver,
 		goto out;
 	}
 
-	if (udc_controller->transceiver) {
+	if (!IS_ERR_OR_NULL(udc_controller->transceiver)) {
 		/* Suspend the controller until OTG enable it */
 		udc_controller->stopped = 1;
 		printk(KERN_INFO "Suspend udc for OTG auto detect\n");
 
 		/* connect to bus through transceiver */
-		if (udc_controller->transceiver) {
+		if (!IS_ERR_OR_NULL(udc_controller->transceiver)) {
 			retval = otg_set_peripheral(
 					udc_controller->transceiver->otg,
 						    &udc_controller->gadget);
@@ -2030,7 +2031,7 @@ static int fsl_stop(struct usb_gadget_driver *driver)
 	if (!driver || driver != udc_controller->driver || !driver->unbind)
 		return -EINVAL;
 
-	if (udc_controller->transceiver)
+	if (!IS_ERR_OR_NULL(udc_controller->transceiver))
 		otg_set_peripheral(udc_controller->transceiver->otg, NULL);
 
 	/* stop DR, disable intr */
@@ -2456,7 +2457,7 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
 #ifdef CONFIG_USB_OTG
 	if (pdata->operating_mode == FSL_USB2_DR_OTG) {
 		udc_controller->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
-		if (!udc_controller->transceiver) {
+		if (IS_ERR_OR_NULL(udc_controller->transceiver)) {
 			ERR("Can't find OTG driver!\n");
 			ret = -ENODEV;
 			goto err_kfree;
@@ -2540,7 +2541,7 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
 		goto err_free_irq;
 	}
 
-	if (!udc_controller->transceiver) {
+	if (IS_ERR_OR_NULL(udc_controller->transceiver)) {
 		/* initialize usb hw reg except for regs for EP,
 		 * leave usbintr reg untouched */
 		dr_controller_setup(udc_controller);
@@ -2564,7 +2565,7 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto err_free_irq;
 
-	if (udc_controller->transceiver)
+	if (!IS_ERR_OR_NULL(udc_controller->transceiver))
 		udc_controller->gadget.is_otg = 1;
 
 	/* setup QH and epctrl for ep0 */

drivers/usb/gadget/mv_udc_core.c

@@ -19,6 +19,7 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/errno.h>
+#include <linux/err.h>
 #include <linux/init.h>
 #include <linux/timer.h>
 #include <linux/list.h>
@@ -1381,7 +1382,7 @@ static int mv_udc_start(struct usb_gadget_driver *driver,
 		return retval;
 	}
 
-	if (udc->transceiver) {
+	if (!IS_ERR_OR_NULL(udc->transceiver)) {
 		retval = otg_set_peripheral(udc->transceiver->otg,
 					&udc->gadget);
 		if (retval) {
@@ -2107,7 +2108,7 @@ static int __devexit mv_udc_remove(struct platform_device *dev)
 	 * then vbus irq will not be requested in udc driver.
 	 */
 	if (udc->pdata && udc->pdata->vbus
-		&& udc->clock_gating && udc->transceiver == NULL)
+		&& udc->clock_gating && IS_ERR_OR_NULL(udc->transceiver))
 		free_irq(udc->pdata->vbus->irq, &dev->dev);
 
 	/* free memory allocated in probe */
@@ -2325,7 +2326,7 @@ static int __devinit mv_udc_probe(struct platform_device *dev)
 	eps_init(udc);
 
 	/* VBUS detect: we can disable/enable clock on demand.*/
-	if (udc->transceiver)
+	if (!IS_ERR_OR_NULL(udc->transceiver))
 		udc->clock_gating = 1;
 	else if (pdata->vbus) {
 		udc->clock_gating = 1;
@@ -2369,7 +2370,7 @@ static int __devinit mv_udc_probe(struct platform_device *dev)
 
 err_unregister:
 	if (udc->pdata && udc->pdata->vbus
-		&& udc->clock_gating && udc->transceiver == NULL)
+		&& udc->clock_gating && IS_ERR_OR_NULL(udc->transceiver))
 		free_irq(pdata->vbus->irq, &dev->dev);
 	device_unregister(&udc->gadget.dev);
 err_free_irq:
@@ -2404,7 +2405,7 @@ static int mv_udc_suspend(struct device *_dev)
 	struct mv_udc *udc = the_controller;
 
 	/* if OTG is enabled, the following will be done in OTG driver*/
-	if (udc->transceiver)
+	if (!IS_ERR_OR_NULL(udc->transceiver))
 		return 0;
 
 	if (udc->pdata->vbus && udc->pdata->vbus->poll)
@@ -2437,7 +2438,7 @@ static int mv_udc_resume(struct device *_dev)
 	int retval;
 
 	/* if OTG is enabled, the following will be done in OTG driver*/
-	if (udc->transceiver)
+	if (!IS_ERR_OR_NULL(udc->transceiver))
 		return 0;
 
 	if (!udc->clock_gating) {

drivers/usb/gadget/omap_udc.c

@@ -35,6 +35,7 @@
 #include <linux/usb/otg.h>
 #include <linux/dma-mapping.h>
 #include <linux/clk.h>
+#include <linux/err.h>
 #include <linux/prefetch.h>
 
 #include <asm/byteorder.h>
@@ -1211,7 +1212,7 @@ static int omap_wakeup(struct usb_gadget *gadget)
 
 	/* NOTE:  non-OTG systems may use SRP TOO... */
 	} else if (!(udc->devstat & UDC_ATT)) {
-		if (udc->transceiver)
+		if (!IS_ERR_OR_NULL(udc->transceiver))
 			retval = otg_start_srp(udc->transceiver->otg);
 	}
 	spin_unlock_irqrestore(&udc->lock, flags);
@@ -1343,7 +1344,7 @@ static int omap_vbus_draw(struct usb_gadget *gadget, unsigned mA)
 	struct omap_udc	*udc;
 
 	udc = container_of(gadget, struct omap_udc, gadget);
-	if (udc->transceiver)
+	if (!IS_ERR_OR_NULL(udc->transceiver))
 		return usb_phy_set_power(udc->transceiver, mA);
 	return -EOPNOTSUPP;
 }
@@ -1792,12 +1793,12 @@ static void devstate_irq(struct omap_udc *udc, u16 irq_src)
 			if (devstat & UDC_ATT) {
 				udc->gadget.speed = USB_SPEED_FULL;
 				VDBG("connect\n");
-				if (!udc->transceiver)
+				if (IS_ERR_OR_NULL(udc->transceiver))
 					pullup_enable(udc);
 				// if (driver->connect) call it
 			} else if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
 				udc->gadget.speed = USB_SPEED_UNKNOWN;
-				if (!udc->transceiver)
+				if (IS_ERR_OR_NULL(udc->transceiver))
 					pullup_disable(udc);
 				DBG("disconnect, gadget %s\n",
 					udc->driver->driver.name);
@@ -1837,12 +1838,12 @@ static void devstate_irq(struct omap_udc *udc, u16 irq_src)
 					udc->driver->suspend(&udc->gadget);
 					spin_lock(&udc->lock);
 				}
-				if (udc->transceiver)
+				if (!IS_ERR_OR_NULL(udc->transceiver))
 					usb_phy_set_suspend(
 							udc->transceiver, 1);
 			} else {
 				VDBG("resume\n");
-				if (udc->transceiver)
+				if (!IS_ERR_OR_NULL(udc->transceiver))
 					usb_phy_set_suspend(
 							udc->transceiver, 0);
 				if (udc->gadget.speed == USB_SPEED_FULL
@@ -2154,7 +2155,7 @@ static int omap_udc_start(struct usb_gadget_driver *driver,
 	omap_writew(UDC_IRQ_SRC_MASK, UDC_IRQ_SRC);
 
 	/* connect to bus through transceiver */
-	if (udc->transceiver) {
+	if (!IS_ERR_OR_NULL(udc->transceiver)) {
 		status = otg_set_peripheral(udc->transceiver->otg,
 						&udc->gadget);
 		if (status < 0) {
@@ -2201,7 +2202,7 @@ static int omap_udc_stop(struct usb_gadget_driver *driver)
 	if (machine_without_vbus_sense())
 		omap_vbus_session(&udc->gadget, 0);
 
-	if (udc->transceiver)
+	if (!IS_ERR_OR_NULL(udc->transceiver))
 		(void) otg_set_peripheral(udc->transceiver->otg, NULL);
 	else
 		pullup_disable(udc);
@@ -2866,7 +2867,7 @@ static int __init omap_udc_probe(struct platform_device *pdev)
 		 * but not having one probably means no VBUS detection.
 		 */
 		xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
-		if (xceiv)
+		if (!IS_ERR_OR_NULL(xceiv))
 			type = xceiv->label;
 		else if (config->otg) {
 			DBG("OTG requires external transceiver!\n");
@@ -2898,7 +2899,7 @@ static int __init omap_udc_probe(struct platform_device *pdev)
 		case 16:
 		case 19:
 		case 25:
-			if (!xceiv) {
+			if (IS_ERR_OR_NULL(xceiv)) {
 				DBG("external transceiver not registered!\n");
 				type = "unknown";
 			}
@@ -3010,7 +3011,7 @@ static int __init omap_udc_probe(struct platform_device *pdev)
 	udc = NULL;
 
 cleanup0:
-	if (xceiv)
+	if (!IS_ERR_OR_NULL(xceiv))
 		usb_put_phy(xceiv);
 
 	if (cpu_is_omap16xx() || cpu_is_omap24xx() || cpu_is_omap7xx()) {
@@ -3040,7 +3041,7 @@ static int __exit omap_udc_remove(struct platform_device *pdev)
 	udc->done = &done;
 
 	pullup_disable(udc);
-	if (udc->transceiver) {
+	if (!IS_ERR_OR_NULL(udc->transceiver)) {
 		usb_put_phy(udc->transceiver);
 		udc->transceiver = NULL;
 	}

drivers/usb/gadget/pxa25x_udc.c

@@ -21,6 +21,7 @@
 #include <linux/ioport.h>
 #include <linux/types.h>
 #include <linux/errno.h>
+#include <linux/err.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/init.h>
@@ -993,7 +994,7 @@ static int pxa25x_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
 
 	udc = container_of(_gadget, struct pxa25x_udc, gadget);
 
-	if (udc->transceiver)
+	if (!IS_ERR_OR_NULL(udc->transceiver))
 		return usb_phy_set_power(udc->transceiver, mA);
 	return -EOPNOTSUPP;
 }
@@ -1299,7 +1300,7 @@ static int pxa25x_start(struct usb_gadget_driver *driver,
 	DMSG("registered gadget driver '%s'\n", driver->driver.name);
 
 	/* connect to bus through transceiver */
-	if (dev->transceiver) {
+	if (!IS_ERR_OR_NULL(dev->transceiver)) {
 		retval = otg_set_peripheral(dev->transceiver->otg,
 						&dev->gadget);
 		if (retval) {
@@ -1359,7 +1360,7 @@ static int pxa25x_stop(struct usb_gadget_driver *driver)
 	stop_activity(dev, driver);
 	local_irq_enable();
 
-	if (dev->transceiver)
+	if (!IS_ERR_OR_NULL(dev->transceiver))
 		(void) otg_set_peripheral(dev->transceiver->otg, NULL);
 
 	driver->unbind(&dev->gadget);
@@ -2237,7 +2238,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
 	if (gpio_is_valid(dev->mach->gpio_pullup))
 		gpio_free(dev->mach->gpio_pullup);
  err_gpio_pullup:
-	if (dev->transceiver) {
+	if (!IS_ERR_OR_NULL(dev->transceiver)) {
 		usb_put_phy(dev->transceiver);
 		dev->transceiver = NULL;
 	}
@@ -2279,7 +2280,7 @@ static int __exit pxa25x_udc_remove(struct platform_device *pdev)
 
 	clk_put(dev->clk);
 
-	if (dev->transceiver) {
+	if (!IS_ERR_OR_NULL(dev->transceiver)) {
 		usb_put_phy(dev->transceiver);
 		dev->transceiver = NULL;
 	}

drivers/usb/gadget/pxa27x_udc.c

@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/errno.h>
+#include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/list.h>
@@ -1573,7 +1574,7 @@ static int should_enable_udc(struct pxa_udc *udc)
 	int put_on;
 
 	put_on = ((udc->pullup_on) && (udc->driver));
-	put_on &= ((udc->vbus_sensed) || (!udc->transceiver));
+	put_on &= ((udc->vbus_sensed) || (IS_ERR_OR_NULL(udc->transceiver)));
 	return put_on;
 }
 
@@ -1594,7 +1595,7 @@ static int should_disable_udc(struct pxa_udc *udc)
 	int put_off;
 
 	put_off = ((!udc->pullup_on) || (!udc->driver));
-	put_off |= ((!udc->vbus_sensed) && (udc->transceiver));
+	put_off |= ((!udc->vbus_sensed) && (!IS_ERR_OR_NULL(udc->transceiver)));
 	return put_off;
 }
 
@@ -1665,7 +1666,7 @@ static int pxa_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
 	struct pxa_udc *udc;
 
 	udc = to_gadget_udc(_gadget);
-	if (udc->transceiver)
+	if (!IS_ERR_OR_NULL(udc->transceiver))
 		return usb_phy_set_power(udc->transceiver, mA);
 	return -EOPNOTSUPP;
 }
@@ -1834,7 +1835,7 @@ static int pxa27x_udc_start(struct usb_gadget_driver *driver,
 	dev_dbg(udc->dev, "registered gadget driver '%s'\n",
 		driver->driver.name);
 
-	if (udc->transceiver) {
+	if (!IS_ERR_OR_NULL(udc->transceiver)) {
 		retval = otg_set_peripheral(udc->transceiver->otg,
 						&udc->gadget);
 		if (retval) {
@@ -1908,7 +1909,7 @@ static int pxa27x_udc_stop(struct usb_gadget_driver *driver)
 	dev_info(udc->dev, "unregistered gadget driver '%s'\n",
 		 driver->driver.name);
 
-	if (udc->transceiver)
+	if (!IS_ERR_OR_NULL(udc->transceiver))
 		return otg_set_peripheral(udc->transceiver->otg, NULL);
 	return 0;
 }

drivers/usb/gadget/s3c-hsudc.c

@@ -24,6 +24,7 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/clk.h>
+#include <linux/err.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 #include <linux/usb/otg.h>
@@ -1165,7 +1166,7 @@ static int s3c_hsudc_start(struct usb_gadget *gadget,
 	}
 
 	/* connect to bus through transceiver */
-	if (hsudc->transceiver) {
+	if (!IS_ERR_OR_NULL(hsudc->transceiver)) {
 		ret = otg_set_peripheral(hsudc->transceiver->otg,
 					&hsudc->gadget);
 		if (ret) {
@@ -1220,7 +1221,7 @@ static int s3c_hsudc_stop(struct usb_gadget *gadget,
 	s3c_hsudc_stop_activity(hsudc);
 	spin_unlock_irqrestore(&hsudc->lock, flags);
 
-	if (hsudc->transceiver)
+	if (!IS_ERR_OR_NULL(hsudc->transceiver))
 		(void) otg_set_peripheral(hsudc->transceiver->otg, NULL);
 
 	disable_irq(hsudc->irq);
@@ -1249,7 +1250,7 @@ static int s3c_hsudc_vbus_draw(struct usb_gadget *gadget, unsigned mA)
 	if (!hsudc)
 		return -ENODEV;
 
-	if (hsudc->transceiver)
+	if (!IS_ERR_OR_NULL(hsudc->transceiver))
 		return usb_phy_set_power(hsudc->transceiver, mA);
 
 	return -EOPNOTSUPP;
@@ -1385,7 +1386,7 @@ static int __devinit s3c_hsudc_probe(struct platform_device *pdev)
 err_remap:
 	release_mem_region(res->start, resource_size(res));
 err_res:
-	if (hsudc->transceiver)
+	if (!IS_ERR_OR_NULL(hsudc->transceiver))
 		usb_put_phy(hsudc->transceiver);
 
 	regulator_bulk_free(ARRAY_SIZE(hsudc->supplies), hsudc->supplies);

drivers/usb/host/ehci-fsl.c

@@ -27,6 +27,7 @@
 #include <linux/types.h>
 #include <linux/delay.h>
 #include <linux/pm.h>
+#include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/fsl_devices.h>
 
@@ -146,7 +147,7 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver,
 		dev_dbg(&pdev->dev, "hcd=0x%p  ehci=0x%p, transceiver=0x%p\n",
 			hcd, ehci, ehci->transceiver);
 
-		if (ehci->transceiver) {
+		if (!IS_ERR_OR_NULL(ehci->transceiver)) {
 			retval = otg_set_host(ehci->transceiver->otg,
 					      &ehci_to_hcd(ehci)->self);
 			if (retval) {
@@ -192,7 +193,7 @@ static void usb_hcd_fsl_remove(struct usb_hcd *hcd,
 	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
 	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 
-	if (ehci->transceiver) {
+	if (!IS_ERR_OR_NULL(ehci->transceiver)) {
 		otg_set_host(ehci->transceiver->otg, NULL);
 		usb_put_phy(ehci->transceiver);
 	}

drivers/usb/host/ehci-msm.c

@@ -146,7 +146,7 @@ static int ehci_msm_probe(struct platform_device *pdev)
 	 * management.
 	 */
 	phy = usb_get_phy(USB_PHY_TYPE_USB2);
-	if (!phy) {
+	if (IS_ERR_OR_NULL(phy)) {
 		dev_err(&pdev->dev, "unable to find transceiver\n");
 		ret = -ENODEV;
 		goto unmap;

drivers/usb/host/ehci-mv.c

@@ -13,6 +13,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/err.h>
 #include <linux/usb/otg.h>
 #include <linux/platform_data/mv_usb.h>
 
@@ -254,7 +255,7 @@ static int mv_ehci_probe(struct platform_device *pdev)
 	if (ehci_mv->mode == MV_USB_MODE_OTG) {
 #ifdef CONFIG_USB_OTG_UTILS
 		ehci_mv->otg = usb_get_phy(USB_PHY_TYPE_USB2);
-		if (!ehci_mv->otg) {
+		if (IS_ERR_OR_NULL(ehci_mv->otg)) {
 			dev_err(&pdev->dev,
 				"unable to find transceiver\n");
 			retval = -ENODEV;
@@ -302,7 +303,7 @@ static int mv_ehci_probe(struct platform_device *pdev)
 		pdata->set_vbus(0);
 #ifdef CONFIG_USB_OTG_UTILS
 err_put_transceiver:
-	if (ehci_mv->otg)
+	if (!IS_ERR_OR_NULL(ehci_mv->otg))
 		usb_put_phy(ehci_mv->otg);
 #endif
 err_disable_clk:
@@ -331,7 +332,7 @@ static int mv_ehci_remove(struct platform_device *pdev)
 	if (hcd->rh_registered)
 		usb_remove_hcd(hcd);
 
-	if (ehci_mv->otg) {
+	if (!IS_ERR_OR_NULL(ehci_mv->otg)) {
 		otg_set_host(ehci_mv->otg->otg, NULL);
 		usb_put_phy(ehci_mv->otg);
 	}

drivers/usb/host/ehci-tegra.c

@@ -17,6 +17,7 @@
  */
 
 #include <linux/clk.h>
+#include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/tegra_usb.h>
 #include <linux/irq.h>
@@ -750,7 +751,7 @@ static int tegra_ehci_probe(struct platform_device *pdev)
 #ifdef CONFIG_USB_OTG_UTILS
 	if (pdata->operating_mode == TEGRA_USB_OTG) {
 		tegra->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
-		if (tegra->transceiver)
+		if (!IS_ERR_OR_NULL(tegra->transceiver))
 			otg_set_host(tegra->transceiver->otg, &hcd->self);
 	}
 #endif
@@ -773,7 +774,7 @@ static int tegra_ehci_probe(struct platform_device *pdev)
 
 fail:
 #ifdef CONFIG_USB_OTG_UTILS
-	if (tegra->transceiver) {
+	if (!IS_ERR_OR_NULL(tegra->transceiver)) {
 		otg_set_host(tegra->transceiver->otg, NULL);
 		usb_put_phy(tegra->transceiver);
 	}
@@ -808,7 +809,7 @@ static int tegra_ehci_remove(struct platform_device *pdev)
 	pm_runtime_put_noidle(&pdev->dev);
 
 #ifdef CONFIG_USB_OTG_UTILS
-	if (tegra->transceiver) {
+	if (!IS_ERR_OR_NULL(tegra->transceiver)) {
 		otg_set_host(tegra->transceiver->otg, NULL);
 		usb_put_phy(tegra->transceiver);
 	}

drivers/usb/host/ohci-omap.c

@@ -18,6 +18,7 @@
 #include <linux/jiffies.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/err.h>
 #include <linux/gpio.h>
 
 #include <mach/hardware.h>
@@ -212,7 +213,7 @@ static int ohci_omap_init(struct usb_hcd *hcd)
 #ifdef	CONFIG_USB_OTG
 	if (need_transceiver) {
 		ohci->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
-		if (ohci->transceiver) {
+		if (!IS_ERR_OR_NULL(ohci->transceiver)) {
 			int	status = otg_set_host(ohci->transceiver->otg,
 						&ohci_to_hcd(ohci)->self);
 			dev_dbg(hcd->self.controller, "init %s transceiver, status %d\n",
@@ -403,7 +404,7 @@ usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev)
 	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
 
 	usb_remove_hcd(hcd);
-	if (ohci->transceiver) {
+	if (!IS_ERR_OR_NULL(ohci->transceiver)) {
 		(void) otg_set_host(ohci->transceiver->otg, 0);
 		usb_put_phy(ohci->transceiver);
 	}

drivers/usb/musb/am35x.c

@@ -29,6 +29,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/clk.h>
+#include <linux/err.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
@@ -365,7 +366,7 @@ static int am35x_musb_init(struct musb *musb)
 
 	usb_nop_xceiv_register();
 	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
-	if (!musb->xceiv)
+	if (IS_ERR_OR_NULL(musb->xceiv))
 		return -ENODEV;
 
 	if (is_host_enabled(musb))

drivers/usb/musb/blackfin.c

@@ -15,6 +15,7 @@
 #include <linux/list.h>
 #include <linux/gpio.h>
 #include <linux/io.h>
+#include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/prefetch.h>
@@ -416,7 +417,7 @@ static int bfin_musb_init(struct musb *musb)
 
 	usb_nop_xceiv_register();
 	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
-	if (!musb->xceiv) {
+	if (IS_ERR_OR_NULL(musb->xceiv)) {
 		gpio_free(musb->config->gpio_vrsel);
 		return -ENODEV;
 	}

drivers/usb/musb/da8xx.c

@@ -29,6 +29,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/clk.h>
+#include <linux/err.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
@@ -426,7 +427,7 @@ static int da8xx_musb_init(struct musb *musb)
 
 	usb_nop_xceiv_register();
 	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
-	if (!musb->xceiv)
+	if (IS_ERR_OR_NULL(musb->xceiv))
 		goto fail;
 
 	if (is_host_enabled(musb))

drivers/usb/musb/davinci.c

@@ -28,6 +28,7 @@
 #include <linux/list.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
+#include <linux/err.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
@@ -385,7 +386,7 @@ static int davinci_musb_init(struct musb *musb)
 
 	usb_nop_xceiv_register();
 	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
-	if (!musb->xceiv)
+	if (IS_ERR_OR_NULL(musb->xceiv))
 		goto unregister;
 
 	musb->mregs += DAVINCI_BASE_OFFSET;

drivers/usb/musb/musb_dsps.c

@@ -31,6 +31,7 @@
 
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/pm_runtime.h>
@@ -377,7 +378,7 @@ static int dsps_musb_init(struct musb *musb)
 	/* NOP driver needs change if supporting dual instance */
 	usb_nop_xceiv_register();
 	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
-	if (!musb->xceiv)
+	if (IS_ERR_OR_NULL(musb->xceiv))
 		return -ENODEV;
 
 	/* Returns zero if e.g. not clocked */

drivers/usb/musb/omap2430.c

@@ -320,7 +320,7 @@ static int omap2430_musb_init(struct musb *musb)
 	 * which needs a driver, drivers aren't always needed.
 	 */
 	musb->xceiv = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
-	if (!musb->xceiv) {
+	if (IS_ERR_OR_NULL(musb->xceiv)) {
 		pr_err("HS USB OTG: no transceiver configured\n");
 		return -ENODEV;
 	}

drivers/usb/musb/tusb6010.c

@@ -17,6 +17,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
+#include <linux/err.h>
 #include <linux/init.h>
 #include <linux/prefetch.h>
 #include <linux/usb.h>
@@ -1079,7 +1080,7 @@ static int tusb_musb_init(struct musb *musb)
 
 	usb_nop_xceiv_register();
 	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
-	if (!musb->xceiv)
+	if (IS_ERR_OR_NULL(musb->xceiv))
 		return -ENODEV;
 
 	pdev = to_platform_device(musb->controller);

drivers/usb/musb/ux500.c

@@ -23,6 +23,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/clk.h>
+#include <linux/err.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
 
@@ -38,7 +39,7 @@ struct ux500_glue {
 static int ux500_musb_init(struct musb *musb)
 {
 	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
-	if (!musb->xceiv) {
+	if (IS_ERR_OR_NULL(musb->xceiv)) {
 		pr_err("HS USB OTG: no transceiver configured\n");
 		return -ENODEV;
 	}

drivers/usb/otg/otg.c

@@ -67,7 +67,7 @@ struct usb_phy *devm_usb_get_phy(struct device *dev, enum usb_phy_type type)
 		return NULL;
 
 	phy = usb_get_phy(type);
-	if (phy) {
+	if (!IS_ERR(phy)) {
 		*ptr = phy;
 		devres_add(dev, ptr);
 	} else
@@ -82,7 +82,7 @@ EXPORT_SYMBOL(devm_usb_get_phy);
  * @type - the type of the phy the controller requires
  *
  * Returns the phy driver, after getting a refcount to it; or
- * null if there is no such phy.  The caller is responsible for
+ * -ENODEV if there is no such phy.  The caller is responsible for
  * calling usb_put_phy() to release that count.
  *
  * For use by USB host and peripheral drivers.