rsi: fix for sdio reset card issue

Issue: While removing and inserting the driver module, observed driver
loading is not successful.

Root cause: Card is not resetted completely without issuing cmd5.

Fix: Issued cmd5 properly.
Signed-off-by: Ganapathi Kondraju <ganapathirajukondraju@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/rsi/rsi_91x_sdio.c

@@ -230,19 +230,16 @@ static void rsi_reset_card(struct sdio_func *pfunction)
 		rsi_dbg(ERR_ZONE, "%s: CMD0 failed : %d\n", __func__, err);
 
 	/* Issue CMD5, arg = 0 */
-	if (!host->ocr_avail) {
 	err = rsi_issue_sdiocommand(pfunction,	SD_IO_SEND_OP_COND, 0,
 				    (MMC_RSP_R4 | MMC_CMD_BCR), &resp);
 	if (err)
 		rsi_dbg(ERR_ZONE, "%s: CMD5 failed : %d\n",
 			__func__, err);
-
-		host->ocr_avail = resp;
-	}
+	card->ocr = resp;
 	/* Issue CMD5, arg = ocr. Wait till card is ready  */
 	for (i = 0; i < 100; i++) {
 		err = rsi_issue_sdiocommand(pfunction, SD_IO_SEND_OP_COND,
-					    host->ocr_avail,
+					    card->ocr,
 					    (MMC_RSP_R4 | MMC_CMD_BCR), &resp);
 		if (err) {
 			rsi_dbg(ERR_ZONE, "%s: CMD5 failed : %d\n",