Commit e0127662 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "A batch of fixes for -rc4, for various platforms.

  Nothing really substantial and worth pointing out in particular; small
  fixes for various bugs, see shortlog for details"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: sa1100: remove references to the defunct handhelds.org
  bus: uniphier-system-bus: fix condition of overlap check
  ARM: uniphier: drop weird sizeof()
  ARM: dts: am335x-baltos-ir5221: fix cpsw_emac0 link type
  ARM: OMAP: Correct interrupt type for ARM TWD
  ARM: DRA722: Add ID detect for Silicon Rev 2.0
  ARM: dts: am43xx: fix edma memcpy channel allocation
  ARM: dts: AM43x-epos: Fix clk parent for synctimer
  ARM: OMAP2: Fix up interconnect barrier initialization for DRA7
  documentation: Fix pinctrl documentation for Meson8 / Meson8b
  ARM: dts: amlogic: Split pinctrl device for Meson8 / Meson8b
  ARM: mvebu: Correct unit address for linksys
  bus: mvebu-mbus: use %pa to print phys_addr_t
  arm64: dts: vulcan: Update PCI ranges
  ARM: u8500_defconfig: turn on the Synaptics RMI4 driver
  ARM: pxa: fix the number of DMA requestor lines
  ARM: OMAP2+: hwmod: Fix updating of sysconfig register
  ARM: OMAP2+: Use srst_udelay for USB on dm814x
parents 5e1b59ab 0b24f7a8
== Amlogic Meson pinmux controller ==
Required properties for the root node:
- compatible: "amlogic,meson8-pinctrl" or "amlogic,meson8b-pinctrl"
- compatible: one of "amlogic,meson8-cbus-pinctrl"
"amlogic,meson8b-cbus-pinctrl"
"amlogic,meson8-aobus-pinctrl"
"amlogic,meson8b-aobus-pinctrl"
- reg: address and size of registers controlling irq functionality
=== GPIO sub-nodes ===
The 2 power domains of the controller (regular and always-on) are
represented as sub-nodes and each of them acts as a GPIO controller.
The GPIO bank for the controller is represented as a sub-node and it acts as a
GPIO controller.
Required properties for sub-nodes are:
- reg: should contain address and size for mux, pull-enable, pull and
......@@ -18,10 +21,6 @@ Required properties for sub-nodes are:
- gpio-controller: identifies the node as a gpio controller
- #gpio-cells: must be 2
Valid sub-node names are:
- "banks" for the regular domain
- "ao-bank" for the always-on domain
=== Other sub-nodes ===
Child nodes without the "gpio-controller" represent some desired
......@@ -45,7 +44,7 @@ pinctrl-bindings.txt
=== Example ===
pinctrl: pinctrl@c1109880 {
compatible = "amlogic,meson8-pinctrl";
compatible = "amlogic,meson8-cbus-pinctrl";
reg = <0xc1109880 0x10>;
#address-cells = <1>;
#size-cells = <1>;
......@@ -61,15 +60,6 @@ pinctrl-bindings.txt
#gpio-cells = <2>;
};
gpio_ao: ao-bank@c1108030 {
reg = <0xc8100014 0x4>,
<0xc810002c 0x4>,
<0xc8100024 0x8>;
reg-names = "mux", "pull", "gpio";
gpio-controller;
#gpio-cells = <2>;
};
nand {
mux {
groups = "nand_io", "nand_io_ce0", "nand_io_ce1",
......@@ -79,18 +69,4 @@ pinctrl-bindings.txt
function = "nand";
};
};
uart_ao_a {
mux {
groups = "uart_tx_ao_a", "uart_rx_ao_a",
"uart_cts_ao_a", "uart_rts_ao_a";
function = "uart_ao";
};
conf {
pins = "GPIOAO_0", "GPIOAO_1",
"GPIOAO_2", "GPIOAO_3";
bias-disable;
};
};
};
......@@ -470,9 +470,12 @@ &davinci_mdio {
};
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <0>;
phy-mode = "rmii";
dual_emac_res_vlan = <1>;
fixed-link {
speed = <100>;
full-duplex;
};
};
&cpsw_emac1 {
......
......@@ -207,7 +207,7 @@ edma: edma@49000000 {
ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
<&edma_tptc2 0>;
ti,edma-memcpy-channels = <32 33>;
ti,edma-memcpy-channels = <58 59>;
};
edma_tptc0: tptc@49800000 {
......
......@@ -794,3 +794,8 @@ &mcasp1 {
tx-num-evt = <32>;
rx-num-evt = <32>;
};
&synctimer_32kclk {
assigned-clocks = <&mux_synctimer32k_ck>;
assigned-clock-parents = <&clkdiv32k_ick>;
};
......@@ -117,7 +117,7 @@ sata@a8000 {
};
/* USB part of the eSATA/USB 2.0 port */
usb@50000 {
usb@58000 {
status = "okay";
};
......
......@@ -91,8 +91,8 @@ clk81: clk@0 {
clock-frequency = <141666666>;
};
pinctrl: pinctrl@c1109880 {
compatible = "amlogic,meson8-pinctrl";
pinctrl_cbus: pinctrl@c1109880 {
compatible = "amlogic,meson8-cbus-pinctrl";
reg = <0xc1109880 0x10>;
#address-cells = <1>;
#size-cells = <1>;
......@@ -108,29 +108,6 @@ gpio: banks@c11080b0 {
#gpio-cells = <2>;
};
gpio_ao: ao-bank@c1108030 {
reg = <0xc8100014 0x4>,
<0xc810002c 0x4>,
<0xc8100024 0x8>;
reg-names = "mux", "pull", "gpio";
gpio-controller;
#gpio-cells = <2>;
};
uart_ao_a_pins: uart_ao_a {
mux {
groups = "uart_tx_ao_a", "uart_rx_ao_a";
function = "uart_ao";
};
};
i2c_ao_pins: i2c_mst_ao {
mux {
groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao";
function = "i2c_mst_ao";
};
};
spi_nor_pins: nor {
mux {
groups = "nor_d", "nor_q", "nor_c", "nor_cs";
......@@ -157,4 +134,34 @@ mux {
};
};
pinctrl_aobus: pinctrl@c8100084 {
compatible = "amlogic,meson8-aobus-pinctrl";
reg = <0xc8100084 0xc>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
gpio_ao: ao-bank@c1108030 {
reg = <0xc8100014 0x4>,
<0xc810002c 0x4>,
<0xc8100024 0x8>;
reg-names = "mux", "pull", "gpio";
gpio-controller;
#gpio-cells = <2>;
};
uart_ao_a_pins: uart_ao_a {
mux {
groups = "uart_tx_ao_a", "uart_rx_ao_a";
function = "uart_ao";
};
};
i2c_ao_pins: i2c_mst_ao {
mux {
groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao";
function = "i2c_mst_ao";
};
};
};
}; /* end of / */
......@@ -155,8 +155,8 @@ clkc: clock-controller@c1104000 {
reg = <0xc1108000 0x4>, <0xc1104000 0x460>;
};
pinctrl: pinctrl@c1109880 {
compatible = "amlogic,meson8b-pinctrl";
pinctrl_cbus: pinctrl@c1109880 {
compatible = "amlogic,meson8b-cbus-pinctrl";
reg = <0xc1109880 0x10>;
#address-cells = <1>;
#size-cells = <1>;
......@@ -171,6 +171,14 @@ gpio: banks@c11080b0 {
gpio-controller;
#gpio-cells = <2>;
};
};
pinctrl_aobus: pinctrl@c8100084 {
compatible = "amlogic,meson8b-aobus-pinctrl";
reg = <0xc8100084 0xc>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
gpio_ao: ao-bank@c1108030 {
reg = <0xc8100014 0x4>,
......
......@@ -70,7 +70,7 @@ local-timer@48240600 {
compatible = "arm,cortex-a9-twd-timer";
clocks = <&mpu_periphclk>;
reg = <0x48240600 0x20>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_EDGE_RISING)>;
interrupt-parent = <&gic>;
};
......
......@@ -63,6 +63,9 @@ CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_BU21013=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_AB8500_PONKEY=y
CONFIG_RMI4_CORE=y
CONFIG_RMI4_I2C=y
CONFIG_RMI4_F11=y
# CONFIG_SERIO is not set
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_LEGACY_PTYS is not set
......
......@@ -669,9 +669,9 @@ void __init dra7xxx_check_revision(void)
case 0:
omap_revision = DRA722_REV_ES1_0;
break;
case 1:
default:
/* If we have no new revisions */
omap_revision = DRA722_REV_ES1_0;
omap_revision = DRA722_REV_ES2_0;
break;
}
break;
......
......@@ -368,6 +368,7 @@ void __init omap5_map_io(void)
void __init dra7xx_map_io(void)
{
iotable_init(dra7xx_io_desc, ARRAY_SIZE(dra7xx_io_desc));
omap_barriers_init();
}
#endif
/*
......
......@@ -1416,8 +1416,6 @@ static void _enable_sysc(struct omap_hwmod *oh)
(sf & SYSC_HAS_CLOCKACTIVITY))
_set_clockactivity(oh, oh->class->sysc->clockact, &v);
/* If the cached value is the same as the new value, skip the write */
if (oh->_sysc_cache != v)
_write_sysconfig(v, oh);
/*
......@@ -1481,6 +1479,8 @@ static void _idle_sysc(struct omap_hwmod *oh)
_set_master_standbymode(oh, idlemode, &v);
}
/* If the cached value is the same as the new value, skip the write */
if (oh->_sysc_cache != v)
_write_sysconfig(v, oh);
}
......
......@@ -582,9 +582,11 @@ static struct omap_hwmod_ocp_if dm81xx_alwon_l3_slow__gpmc = {
.user = OCP_USER_MPU,
};
/* USB needs udelay 1 after reset at least on hp t410, use 2 for margin */
static struct omap_hwmod_class_sysconfig dm81xx_usbhsotg_sysc = {
.rev_offs = 0x0,
.sysc_offs = 0x10,
.srst_udelay = 2,
.sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
SYSC_HAS_SOFTRESET,
.idlemodes = SIDLE_SMART | MSTANDBY_FORCE | MSTANDBY_SMART,
......
......@@ -489,6 +489,7 @@ IS_OMAP_TYPE(3430, 0x3430)
#define DRA752_REV_ES2_0 (DRA7XX_CLASS | (0x52 << 16) | (0x20 << 8))
#define DRA722_REV_ES1_0 (DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8))
#define DRA722_REV_ES1_0 (DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8))
#define DRA722_REV_ES2_0 (DRA7XX_CLASS | (0x22 << 16) | (0x20 << 8))
void omap2xxx_check_revision(void);
void omap3xxx_check_revision(void);
......
......@@ -1235,5 +1235,6 @@ static struct platform_device pxa2xx_pxa_dma = {
void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors)
{
pxa_dma_pdata.dma_channels = nb_channels;
pxa_dma_pdata.nb_requestors = nb_requestors;
pxa_register_device(&pxa2xx_pxa_dma, &pxa_dma_pdata);
}
......@@ -61,10 +61,7 @@ config SA1100_H3100
select MFD_IPAQ_MICRO
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
H3100 handheld computer. Information about this machine and the
Linux port to this machine can be found at:
<http://www.handhelds.org/Compaq/index.html#iPAQ_H3100>
H3100 handheld computer.
config SA1100_H3600
bool "Compaq iPAQ H3600/H3700"
......@@ -73,10 +70,7 @@ config SA1100_H3600
select MFD_IPAQ_MICRO
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
H3600 handheld computer. Information about this machine and the
Linux port to this machine can be found at:
<http://www.handhelds.org/Compaq/index.html#iPAQ_H3600>
H3600 and H3700 handheld computers.
config SA1100_BADGE4
bool "HP Labs BadgePAD 4"
......
......@@ -120,7 +120,7 @@ static int __init uniphier_smp_prepare_trampoline(unsigned int max_cpus)
if (ret)
return ret;
uniphier_smp_rom_boot_rsv2 = ioremap(rom_rsv2_phys, sizeof(SZ_4));
uniphier_smp_rom_boot_rsv2 = ioremap(rom_rsv2_phys, SZ_4);
if (!uniphier_smp_rom_boot_rsv2) {
pr_err("failed to map ROM_BOOT_RSV2 register\n");
return -ENOMEM;
......
......@@ -108,12 +108,15 @@ pci {
reg = <0x0 0x30000000 0x0 0x10000000>;
reg-names = "PCI ECAM";
/* IO 0x4000_0000 - 0x4001_0000 */
ranges = <0x01000000 0 0x40000000 0 0x40000000 0 0x00010000
/* MEM 0x4800_0000 - 0x5000_0000 */
0x02000000 0 0x48000000 0 0x48000000 0 0x08000000
/* MEM64 pref 0x6_0000_0000 - 0x7_0000_0000 */
0x43000000 6 0x00000000 6 0x00000000 1 0x00000000>;
/*
* PCI ranges:
* IO no supported
* MEM 0x4000_0000 - 0x6000_0000
* MEM64 pref 0x40_0000_0000 - 0x60_0000_0000
*/
ranges =
<0x02000000 0 0x40000000 0 0x40000000 0 0x20000000
0x43000000 0x40 0x00000000 0x40 0x00000000 0x20 0x00000000>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map =
/* addr pin ic icaddr icintr */
......
......@@ -972,7 +972,7 @@ int mvebu_mbus_get_dram_win_info(phys_addr_t phyaddr, u8 *target, u8 *attr)
}
}
pr_err("invalid dram address 0x%x\n", phyaddr);
pr_err("invalid dram address %pa\n", &phyaddr);
return -EINVAL;
}
EXPORT_SYMBOL_GPL(mvebu_mbus_get_dram_win_info);
......
......@@ -108,7 +108,7 @@ static int uniphier_system_bus_check_overlap(
for (i = 0; i < ARRAY_SIZE(priv->bank); i++) {
for (j = i + 1; j < ARRAY_SIZE(priv->bank); j++) {
if (priv->bank[i].end > priv->bank[j].base ||
if (priv->bank[i].end > priv->bank[j].base &&
priv->bank[i].base < priv->bank[j].end) {
dev_err(priv->dev,
"region overlap between bank%d and bank%d\n",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment