Merge branch 'tee/initial-merge' into fixes

This is a dependency for the following fix

* tee/initial-merge:
  arm64: dt: hikey: Add optee node
  Documentation: tee subsystem and op-tee driver
  tee: add OP-TEE driver
  tee: generic TEE subsystem
  dt/bindings: add bindings for optee

Documentation/00-INDEX

@@ -412,6 +412,8 @@ sysctl/
 	- directory with info on the /proc/sys/* files.
 target/
 	- directory with info on generating TCM v4 fabric .ko modules
+tee.txt
+	- info on the TEE subsystem and drivers
 this_cpu_ops.txt
 	- List rationale behind and the way to use this_cpu operations.
 thermal/

Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.txt

+OP-TEE Device Tree Bindings
+
+OP-TEE is a piece of software using hardware features to provide a Trusted
+Execution Environment. The security can be provided with ARM TrustZone, but
+also by virtualization or a separate chip.
+
+We're using "linaro" as the first part of the compatible property for
+the reference implementation maintained by Linaro.
+
+* OP-TEE based on ARM TrustZone required properties:
+
+- compatible     : should contain "linaro,optee-tz"
+
+- method         : The method of calling the OP-TEE Trusted OS. Permitted
+                   values are:
+
+                   "smc" : SMC #0, with the register assignments specified
+		           in drivers/tee/optee/optee_smc.h
+
+                   "hvc" : HVC #0, with the register assignments specified
+		           in drivers/tee/optee/optee_smc.h
+
+
+
+Example:
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -173,6 +173,7 @@ lego	LEGO Systems A/S
 lenovo	Lenovo Group Ltd.
 lg	LG Corporation
 licheepi	Lichee Pi
+linaro	Linaro Limited
 linux	Linux-specific binding
 lltc	Linear Technology Corporation
 lsi	LSI Corp. (LSI Logic)

Documentation/ioctl/ioctl-number.txt

@@ -309,6 +309,7 @@ Code  Seq#(hex)	Include File		Comments
 0xA3	80-8F	Port ACL		in development:
 					<mailto:tlewis@mindspring.com>
 0xA3	90-9F	linux/dtlk.h
+0xA4	00-1F	uapi/linux/tee.h	Generic TEE subsystem
 0xAA	00-3F	linux/uapi/linux/userfaultfd.h
 0xAB	00-1F	linux/nbd.h
 0xAC	00-1F	linux/raw.h

Documentation/tee.txt

+TEE subsystem
+This document describes the TEE subsystem in Linux.
+
+A TEE (Trusted Execution Environment) is a trusted OS running in some
+secure environment, for example, TrustZone on ARM CPUs, or a separate
+secure co-processor etc. A TEE driver handles the details needed to
+communicate with the TEE.
+
+This subsystem deals with:
+
+- Registration of TEE drivers
+
+- Managing shared memory between Linux and the TEE
+
+- Providing a generic API to the TEE
+
+The TEE interface
+=================
+
+include/uapi/linux/tee.h defines the generic interface to a TEE.
+
+User space (the client) connects to the driver by opening /dev/tee[0-9]* or
+/dev/teepriv[0-9]*.
+
+- TEE_IOC_SHM_ALLOC allocates shared memory and returns a file descriptor
+  which user space can mmap. When user space doesn't need the file
+  descriptor any more, it should be closed. When shared memory isn't needed
+  any longer it should be unmapped with munmap() to allow the reuse of
+  memory.
+
+- TEE_IOC_VERSION lets user space know which TEE this driver handles and
+  the its capabilities.
+
+- TEE_IOC_OPEN_SESSION opens a new session to a Trusted Application.
+
+- TEE_IOC_INVOKE invokes a function in a Trusted Application.
+
+- TEE_IOC_CANCEL may cancel an ongoing TEE_IOC_OPEN_SESSION or TEE_IOC_INVOKE.
+
+- TEE_IOC_CLOSE_SESSION closes a session to a Trusted Application.
+
+There are two classes of clients, normal clients and supplicants. The latter is
+a helper process for the TEE to access resources in Linux, for example file
+system access. A normal client opens /dev/tee[0-9]* and a supplicant opens
+/dev/teepriv[0-9].
+
+Much of the communication between clients and the TEE is opaque to the
+driver. The main job for the driver is to receive requests from the
+clients, forward them to the TEE and send back the results. In the case of
+supplicants the communication goes in the other direction, the TEE sends
+requests to the supplicant which then sends back the result.
+
+OP-TEE driver
+=============
+
+The OP-TEE driver handles OP-TEE [1] based TEEs. Currently it is only the ARM
+TrustZone based OP-TEE solution that is supported.
+
+Lowest level of communication with OP-TEE builds on ARM SMC Calling
+Convention (SMCCC) [2], which is the foundation for OP-TEE's SMC interface
+[3] used internally by the driver. Stacked on top of that is OP-TEE Message
+Protocol [4].
+
+OP-TEE SMC interface provides the basic functions required by SMCCC and some
+additional functions specific for OP-TEE. The most interesting functions are:
+
+- OPTEE_SMC_FUNCID_CALLS_UID (part of SMCCC) returns the version information
+  which is then returned by TEE_IOC_VERSION
+
+- OPTEE_SMC_CALL_GET_OS_UUID returns the particular OP-TEE implementation, used
+  to tell, for instance, a TrustZone OP-TEE apart from an OP-TEE running on a
+  separate secure co-processor.
+
+- OPTEE_SMC_CALL_WITH_ARG drives the OP-TEE message protocol
+
+- OPTEE_SMC_GET_SHM_CONFIG lets the driver and OP-TEE agree on which memory
+  range to used for shared memory between Linux and OP-TEE.
+
+The GlobalPlatform TEE Client API [5] is implemented on top of the generic
+TEE API.
+
+Picture of the relationship between the different components in the
+OP-TEE architecture.
+
+    User space                  Kernel                   Secure world
+    ~~~~~~~~~~                  ~~~~~~                   ~~~~~~~~~~~~
+ +--------+                                             +-------------+
+ | Client |                                             | Trusted     |
+ +--------+                                             | Application |
+    /\                                                  +-------------+
+    || +----------+                                           /\
+    || |tee-      |                                           ||
+    || |supplicant|                                           \/
+    || +----------+                                     +-------------+
+    \/      /\                                          | TEE Internal|
+ +-------+  ||                                          | API         |
+ + TEE   |  ||            +--------+--------+           +-------------+
+ | Client|  ||            | TEE    | OP-TEE |           | OP-TEE      |
+ | API   |  \/            | subsys | driver |           | Trusted OS  |
+ +-------+----------------+----+-------+----+-----------+-------------+
+ |      Generic TEE API        |       |     OP-TEE MSG               |
+ |      IOCTL (TEE_IOC_*)      |       |     SMCCC (OPTEE_SMC_CALL_*) |
+ +-----------------------------+       +------------------------------+
+
+RPC (Remote Procedure Call) are requests from secure world to kernel driver
+or tee-supplicant. An RPC is identified by a special range of SMCCC return
+values from OPTEE_SMC_CALL_WITH_ARG. RPC messages which are intended for the
+kernel are handled by the kernel driver. Other RPC messages will be forwarded to
+tee-supplicant without further involvement of the driver, except switching
+shared memory buffer representation.
+
+References:
+[1] https://github.com/OP-TEE/optee_os
+[2] http://infocenter.arm.com/help/topic/com.arm.doc.den0028a/index.html
+[3] drivers/tee/optee/optee_smc.h
+[4] drivers/tee/optee/optee_msg.h
+[5] http://www.globalplatform.org/specificationsdevice.asp look for
+    "TEE Client API Specification v1.0" and click download.

MAINTAINERS

@@ -9515,6 +9515,11 @@ F:	arch/*/oprofile/
 F:	drivers/oprofile/
 F:	include/linux/oprofile.h
 
+OP-TEE DRIVER
+M:	Jens Wiklander <jens.wiklander@linaro.org>
+S:	Maintained
+F:	drivers/tee/optee/
+
 ORACLE CLUSTER FILESYSTEM 2 (OCFS2)
 M:	Mark Fasheh <mfasheh@versity.com>
 M:	Joel Becker <jlbec@evilplan.org>
@@ -11296,6 +11301,14 @@ F:	drivers/hwtracing/stm/
 F:	include/linux/stm.h
 F:	include/uapi/linux/stm.h
 
+TEE SUBSYSTEM
+M:	Jens Wiklander <jens.wiklander@linaro.org>
+S:	Maintained
+F:	include/linux/tee_drv.h
+F:	include/uapi/linux/tee.h
+F:	drivers/tee/
+F:	Documentation/tee.txt
+
 THUNDERBOLT DRIVER
 M:	Andreas Noever <andreas.noever@gmail.com>
 S:	Maintained

arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts

@@ -411,6 +411,13 @@ ldo22: LDO22 {
 			};
 		};
 	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
 };
 
 &uart2 {

drivers/Kconfig

@@ -204,4 +204,6 @@ source "drivers/fpga/Kconfig"
 
 source "drivers/fsi/Kconfig"
 
+source "drivers/tee/Kconfig"
+
 endmenu

drivers/Makefile

@@ -180,3 +180,4 @@ obj-$(CONFIG_ANDROID)		+= android/
 obj-$(CONFIG_NVMEM)		+= nvmem/
 obj-$(CONFIG_FPGA)		+= fpga/
 obj-$(CONFIG_FSI)		+= fsi/
+obj-$(CONFIG_TEE)		+= tee/

drivers/tee/Kconfig

+# Generic Trusted Execution Environment Configuration
+config TEE
+	tristate "Trusted Execution Environment support"
+	select DMA_SHARED_BUFFER
+	select GENERIC_ALLOCATOR
+	help
+	  This implements a generic interface towards a Trusted Execution
+	  Environment (TEE).
+
+if TEE
+
+menu "TEE drivers"
+
+source "drivers/tee/optee/Kconfig"
+
+endmenu
+
+endif

drivers/tee/Makefile

+obj-$(CONFIG_TEE) += tee.o
+tee-objs += tee_core.o
+tee-objs += tee_shm.o
+tee-objs += tee_shm_pool.o
+obj-$(CONFIG_OPTEE) += optee/

drivers/tee/optee/Kconfig

+# OP-TEE Trusted Execution Environment Configuration
+config OPTEE
+	tristate "OP-TEE"
+	depends on HAVE_ARM_SMCCC
+	help
+	  This implements the OP-TEE Trusted Execution Environment (TEE)
+	  driver.

drivers/tee/optee/Makefile

+obj-$(CONFIG_OPTEE) += optee.o
+optee-objs += core.o
+optee-objs += call.o
+optee-objs += rpc.o
+optee-objs += supp.o

drivers/tee/optee/optee_private.h

+/*
+ * Copyright (c) 2015, Linaro Limited
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef OPTEE_PRIVATE_H
+#define OPTEE_PRIVATE_H
+
+#include <linux/arm-smccc.h>
+#include <linux/semaphore.h>
+#include <linux/tee_drv.h>
+#include <linux/types.h>
+#include "optee_msg.h"
+
+#define OPTEE_MAX_ARG_SIZE	1024
+
+/* Some Global Platform error codes used in this driver */
+#define TEEC_SUCCESS			0x00000000
+#define TEEC_ERROR_BAD_PARAMETERS	0xFFFF0006
+#define TEEC_ERROR_COMMUNICATION	0xFFFF000E
+#define TEEC_ERROR_OUT_OF_MEMORY	0xFFFF000C
+
+#define TEEC_ORIGIN_COMMS		0x00000002
+
+typedef void (optee_invoke_fn)(unsigned long, unsigned long, unsigned long,
+				unsigned long, unsigned long, unsigned long,
+				unsigned long, unsigned long,
+				struct arm_smccc_res *);
+
+struct optee_call_queue {
+	/* Serializes access to this struct */
+	struct mutex mutex;
+	struct list_head waiters;
+};
+
+struct optee_wait_queue {
+	/* Serializes access to this struct */
+	struct mutex mu;
+	struct list_head db;
+};
+
+/**
+ * struct optee_supp - supplicant synchronization struct
+ * @ctx			the context of current connected supplicant.
+ *			if !NULL the supplicant device is available for use,
+ *			else busy
+ * @ctx_mutex:		held while accessing @ctx
+ * @func:		supplicant function id to call
+ * @ret:		call return value
+ * @num_params:		number of elements in @param
+ * @param:		parameters for @func
+ * @req_posted:		if true, a request has been posted to the supplicant
+ * @supp_next_send:	if true, next step is for supplicant to send response
+ * @thrd_mutex:		held by the thread doing a request to supplicant
+ * @supp_mutex:		held by supplicant while operating on this struct
+ * @data_to_supp:	supplicant is waiting on this for next request
+ * @data_from_supp:	requesting thread is waiting on this to get the result
+ */
+struct optee_supp {
+	struct tee_context *ctx;
+	/* Serializes access of ctx */
+	struct mutex ctx_mutex;
+
+	u32 func;
+	u32 ret;
+	size_t num_params;
+	struct tee_param *param;
+
+	bool req_posted;
+	bool supp_next_send;
+	/* Serializes access to this struct for requesting thread */
+	struct mutex thrd_mutex;
+	/* Serializes access to this struct for supplicant threads */
+	struct mutex supp_mutex;
+	struct completion data_to_supp;
+	struct completion data_from_supp;
+};
+
+/**
+ * struct optee - main service struct
+ * @supp_teedev:	supplicant device
+ * @teedev:		client device
+ * @invoke_fn:		function to issue smc or hvc
+ * @call_queue:		queue of threads waiting to call @invoke_fn
+ * @wait_queue:		queue of threads from secure world waiting for a
+ *			secure world sync object
+ * @supp:		supplicant synchronization struct for RPC to supplicant
+ * @pool:		shared memory pool
+ * @memremaped_shm	virtual address of memory in shared memory pool
+ */
+struct optee {
+	struct tee_device *supp_teedev;
+	struct tee_device *teedev;
+	optee_invoke_fn *invoke_fn;
+	struct optee_call_queue call_queue;
+	struct optee_wait_queue wait_queue;
+	struct optee_supp supp;
+	struct tee_shm_pool *pool;
+	void *memremaped_shm;
+};
+
+struct optee_session {
+	struct list_head list_node;
+	u32 session_id;
+};
+
+struct optee_context_data {
+	/* Serializes access to this struct */
+	struct mutex mutex;
+	struct list_head sess_list;
+};
+
+struct optee_rpc_param {
+	u32	a0;
+	u32	a1;
+	u32	a2;
+	u32	a3;
+	u32	a4;
+	u32	a5;
+	u32	a6;
+	u32	a7;
+};
+
+void optee_handle_rpc(struct tee_context *ctx, struct optee_rpc_param *param);
+
+void optee_wait_queue_init(struct optee_wait_queue *wq);
+void optee_wait_queue_exit(struct optee_wait_queue *wq);
+
+u32 optee_supp_thrd_req(struct tee_context *ctx, u32 func, size_t num_params,
+			struct tee_param *param);
+
+int optee_supp_read(struct tee_context *ctx, void __user *buf, size_t len);
+int optee_supp_write(struct tee_context *ctx, void __user *buf, size_t len);
+void optee_supp_init(struct optee_supp *supp);
+void optee_supp_uninit(struct optee_supp *supp);
+
+int optee_supp_recv(struct tee_context *ctx, u32 *func, u32 *num_params,
+		    struct tee_param *param);
+int optee_supp_send(struct tee_context *ctx, u32 ret, u32 num_params,
+		    struct tee_param *param);
+
+u32 optee_do_call_with_arg(struct tee_context *ctx, phys_addr_t parg);
+int optee_open_session(struct tee_context *ctx,
+		       struct tee_ioctl_open_session_arg *arg,
+		       struct tee_param *param);
+int optee_close_session(struct tee_context *ctx, u32 session);
+int optee_invoke_func(struct tee_context *ctx, struct tee_ioctl_invoke_arg *arg,
+		      struct tee_param *param);
+int optee_cancel_req(struct tee_context *ctx, u32 cancel_id, u32 session);
+
+void optee_enable_shm_cache(struct optee *optee);
+void optee_disable_shm_cache(struct optee *optee);
+
+int optee_from_msg_param(struct tee_param *params, size_t num_params,
+			 const struct optee_msg_param *msg_params);
+int optee_to_msg_param(struct optee_msg_param *msg_params, size_t num_params,
+		       const struct tee_param *params);
+
+/*
+ * Small helpers
+ */
+
+static inline void *reg_pair_to_ptr(u32 reg0, u32 reg1)
+{
+	return (void *)(unsigned long)(((u64)reg0 << 32) | reg1);
+}
+
+static inline void reg_pair_from_64(u32 *reg0, u32 *reg1, u64 val)
+{
+	*reg0 = val >> 32;
+	*reg1 = val;
+}
+
+#endif /*OPTEE_PRIVATE_H*/

drivers/tee/optee/rpc.c

+/*
+ * Copyright (c) 2015-2016, Linaro Limited
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/tee_drv.h>
+#include "optee_private.h"
+#include "optee_smc.h"
+
+struct wq_entry {
+	struct list_head link;
+	struct completion c;
+	u32 key;
+};
+
+void optee_wait_queue_init(struct optee_wait_queue *priv)
+{
+	mutex_init(&priv->mu);
+	INIT_LIST_HEAD(&priv->db);
+}
+
+void optee_wait_queue_exit(struct optee_wait_queue *priv)
+{
+	mutex_destroy(&priv->mu);
+}
+
+static void handle_rpc_func_cmd_get_time(struct optee_msg_arg *arg)
+{
+	struct timespec64 ts;
+
+	if (arg->num_params != 1)
+		goto bad;
+	if ((arg->params[0].attr & OPTEE_MSG_ATTR_TYPE_MASK) !=
+			OPTEE_MSG_ATTR_TYPE_VALUE_OUTPUT)
+		goto bad;
+
+	getnstimeofday64(&ts);
+	arg->params[0].u.value.a = ts.tv_sec;
+	arg->params[0].u.value.b = ts.tv_nsec;
+
+	arg->ret = TEEC_SUCCESS;
+	return;
+bad:
+	arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+}
+
+static struct wq_entry *wq_entry_get(struct optee_wait_queue *wq, u32 key)
+{
+	struct wq_entry *w;
+
+	mutex_lock(&wq->mu);
+
+	list_for_each_entry(w, &wq->db, link)
+		if (w->key == key)
+			goto out;
+
+	w = kmalloc(sizeof(*w), GFP_KERNEL);
+	if (w) {
+		init_completion(&w->c);
+		w->key = key;
+		list_add_tail(&w->link, &wq->db);
+	}
+out:
+	mutex_unlock(&wq->mu);
+	return w;
+}
+
+static void wq_sleep(struct optee_wait_queue *wq, u32 key)
+{
+	struct wq_entry *w = wq_entry_get(wq, key);
+
+	if (w) {
+		wait_for_completion(&w->c);
+		mutex_lock(&wq->mu);
+		list_del(&w->link);
+		mutex_unlock(&wq->mu);
+		kfree(w);
+	}
+}
+
+static void wq_wakeup(struct optee_wait_queue *wq, u32 key)
+{
+	struct wq_entry *w = wq_entry_get(wq, key);
+
+	if (w)
+		complete(&w->c);
+}
+
+static void handle_rpc_func_cmd_wq(struct optee *optee,
+				   struct optee_msg_arg *arg)
+{
+	if (arg->num_params != 1)
+		goto bad;
+
+	if ((arg->params[0].attr & OPTEE_MSG_ATTR_TYPE_MASK) !=
+			OPTEE_MSG_ATTR_TYPE_VALUE_INPUT)
+		goto bad;
+
+	switch (arg->params[0].u.value.a) {
+	case OPTEE_MSG_RPC_WAIT_QUEUE_SLEEP:
+		wq_sleep(&optee->wait_queue, arg->params[0].u.value.b);
+		break;
+	case OPTEE_MSG_RPC_WAIT_QUEUE_WAKEUP:
+		wq_wakeup(&optee->wait_queue, arg->params[0].u.value.b);
+		break;
+	default:
+		goto bad;
+	}
+
+	arg->ret = TEEC_SUCCESS;
+	return;
+bad:
+	arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+}
+
+static void handle_rpc_func_cmd_wait(struct optee_msg_arg *arg)
+{
+	u32 msec_to_wait;
+
+	if (arg->num_params != 1)
+		goto bad;
+
+	if ((arg->params[0].attr & OPTEE_MSG_ATTR_TYPE_MASK) !=
+			OPTEE_MSG_ATTR_TYPE_VALUE_INPUT)
+		goto bad;
+
+	msec_to_wait = arg->params[0].u.value.a;
+
+	/* set task's state to interruptible sleep */
+	set_current_state(TASK_INTERRUPTIBLE);
+
+	/* take a nap */
+	msleep(msec_to_wait);
+
+	arg->ret = TEEC_SUCCESS;
+	return;
+bad:
+	arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+}
+
+static void handle_rpc_supp_cmd(struct tee_context *ctx,
+				struct optee_msg_arg *arg)
+{
+	struct tee_param *params;
+
+	arg->ret_origin = TEEC_ORIGIN_COMMS;
+
+	params = kmalloc_array(arg->num_params, sizeof(struct tee_param),
+			       GFP_KERNEL);
+	if (!params) {
+		arg->ret = TEEC_ERROR_OUT_OF_MEMORY;
+		return;
+	}
+
+	if (optee_from_msg_param(params, arg->num_params, arg->params)) {
+		arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+		goto out;
+	}
+
+	arg->ret = optee_supp_thrd_req(ctx, arg->cmd, arg->num_params, params);
+
+	if (optee_to_msg_param(arg->params, arg->num_params, params))
+		arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+out:
+	kfree(params);
+}
+
+static struct tee_shm *cmd_alloc_suppl(struct tee_context *ctx, size_t sz)
+{
+	u32 ret;
+	struct tee_param param;
+	struct optee *optee = tee_get_drvdata(ctx->teedev);
+	struct tee_shm *shm;
+
+	param.attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT;
+	param.u.value.a = OPTEE_MSG_RPC_SHM_TYPE_APPL;
+	param.u.value.b = sz;
+	param.u.value.c = 0;
+
+	ret = optee_supp_thrd_req(ctx, OPTEE_MSG_RPC_CMD_SHM_ALLOC, 1, &param);
+	if (ret)
+		return ERR_PTR(-ENOMEM);
+
+	mutex_lock(&optee->supp.ctx_mutex);
+	/* Increases count as secure world doesn't have a reference */
+	shm = tee_shm_get_from_id(optee->supp.ctx, param.u.value.c);
+	mutex_unlock(&optee->supp.ctx_mutex);
+	return shm;
+}
+
+static void handle_rpc_func_cmd_shm_alloc(struct tee_context *ctx,
+					  struct optee_msg_arg *arg)
+{
+	phys_addr_t pa;
+	struct tee_shm *shm;
+	size_t sz;
+	size_t n;
+
+	arg->ret_origin = TEEC_ORIGIN_COMMS;
+
+	if (!arg->num_params ||
+	    arg->params[0].attr != OPTEE_MSG_ATTR_TYPE_VALUE_INPUT) {
+		arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+		return;
+	}
+
+	for (n = 1; n < arg->num_params; n++) {
+		if (arg->params[n].attr != OPTEE_MSG_ATTR_TYPE_NONE) {
+			arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+			return;
+		}
+	}
+
+	sz = arg->params[0].u.value.b;
+	switch (arg->params[0].u.value.a) {
+	case OPTEE_MSG_RPC_SHM_TYPE_APPL:
+		shm = cmd_alloc_suppl(ctx, sz);
+		break;
+	case OPTEE_MSG_RPC_SHM_TYPE_KERNEL:
+		shm = tee_shm_alloc(ctx, sz, TEE_SHM_MAPPED);
+		break;
+	default:
+		arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+		return;
+	}
+
+	if (IS_ERR(shm)) {
+		arg->ret = TEEC_ERROR_OUT_OF_MEMORY;
+		return;
+	}
+
+	if (tee_shm_get_pa(shm, 0, &pa)) {
+		arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+		goto bad;
+	}
+
+	arg->params[0].attr = OPTEE_MSG_ATTR_TYPE_TMEM_OUTPUT;
+	arg->params[0].u.tmem.buf_ptr = pa;
+	arg->params[0].u.tmem.size = sz;
+	arg->params[0].u.tmem.shm_ref = (unsigned long)shm;
+	arg->ret = TEEC_SUCCESS;
+	return;
+bad:
+	tee_shm_free(shm);
+}
+
+static void cmd_free_suppl(struct tee_context *ctx, struct tee_shm *shm)
+{
+	struct tee_param param;
+
+	param.attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT;
+	param.u.value.a = OPTEE_MSG_RPC_SHM_TYPE_APPL;
+	param.u.value.b = tee_shm_get_id(shm);
+	param.u.value.c = 0;
+
+	/*
+	 * Match the tee_shm_get_from_id() in cmd_alloc_suppl() as secure
+	 * world has released its reference.
+	 *
+	 * It's better to do this before sending the request to supplicant
+	 * as we'd like to let the process doing the initial allocation to
+	 * do release the last reference too in order to avoid stacking
+	 * many pending fput() on the client process. This could otherwise
+	 * happen if secure world does many allocate and free in a single
+	 * invoke.
+	 */
+	tee_shm_put(shm);
+
+	optee_supp_thrd_req(ctx, OPTEE_MSG_RPC_CMD_SHM_FREE, 1, &param);
+}
+
+static void handle_rpc_func_cmd_shm_free(struct tee_context *ctx,
+					 struct optee_msg_arg *arg)
+{
+	struct tee_shm *shm;
+
+	arg->ret_origin = TEEC_ORIGIN_COMMS;
+
+	if (arg->num_params != 1 ||
+	    arg->params[0].attr != OPTEE_MSG_ATTR_TYPE_VALUE_INPUT) {
+		arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+		return;
+	}
+
+	shm = (struct tee_shm *)(unsigned long)arg->params[0].u.value.b;
+	switch (arg->params[0].u.value.a) {
+	case OPTEE_MSG_RPC_SHM_TYPE_APPL:
+		cmd_free_suppl(ctx, shm);
+		break;
+	case OPTEE_MSG_RPC_SHM_TYPE_KERNEL:
+		tee_shm_free(shm);
+		break;
+	default:
+		arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+	}
+	arg->ret = TEEC_SUCCESS;
+}
+
+static void handle_rpc_func_cmd(struct tee_context *ctx, struct optee *optee,
+				struct tee_shm *shm)
+{
+	struct optee_msg_arg *arg;
+
+	arg = tee_shm_get_va(shm, 0);
+	if (IS_ERR(arg)) {
+		pr_err("%s: tee_shm_get_va %p failed\n", __func__, shm);
+		return;
+	}
+
+	switch (arg->cmd) {
+	case OPTEE_MSG_RPC_CMD_GET_TIME:
+		handle_rpc_func_cmd_get_time(arg);
+		break;
+	case OPTEE_MSG_RPC_CMD_WAIT_QUEUE:
+		handle_rpc_func_cmd_wq(optee, arg);
+		break;
+	case OPTEE_MSG_RPC_CMD_SUSPEND:
+		handle_rpc_func_cmd_wait(arg);
+		break;
+	case OPTEE_MSG_RPC_CMD_SHM_ALLOC:
+		handle_rpc_func_cmd_shm_alloc(ctx, arg);
+		break;
+	case OPTEE_MSG_RPC_CMD_SHM_FREE:
+		handle_rpc_func_cmd_shm_free(ctx, arg);
+		break;
+	default:
+		handle_rpc_supp_cmd(ctx, arg);
+	}
+}
+
+/**
+ * optee_handle_rpc() - handle RPC from secure world
+ * @ctx:	context doing the RPC
+ * @param:	value of registers for the RPC
+ *
+ * Result of RPC is written back into @param.
+ */
+void optee_handle_rpc(struct tee_context *ctx, struct optee_rpc_param *param)
+{
+	struct tee_device *teedev = ctx->teedev;
+	struct optee *optee = tee_get_drvdata(teedev);
+	struct tee_shm *shm;
+	phys_addr_t pa;
+
+	switch (OPTEE_SMC_RETURN_GET_RPC_FUNC(param->a0)) {
+	case OPTEE_SMC_RPC_FUNC_ALLOC:
+		shm = tee_shm_alloc(ctx, param->a1, TEE_SHM_MAPPED);
+		if (!IS_ERR(shm) && !tee_shm_get_pa(shm, 0, &pa)) {
+			reg_pair_from_64(&param->a1, &param->a2, pa);
+			reg_pair_from_64(&param->a4, &param->a5,
+					 (unsigned long)shm);
+		} else {
+			param->a1 = 0;
+			param->a2 = 0;
+			param->a4 = 0;
+			param->a5 = 0;
+		}
+		break;
+	case OPTEE_SMC_RPC_FUNC_FREE:
+		shm = reg_pair_to_ptr(param->a1, param->a2);
+		tee_shm_free(shm);
+		break;
+	case OPTEE_SMC_RPC_FUNC_IRQ:
+		/*
+		 * An IRQ was raised while secure world was executing,
+		 * since all IRQs are handled in Linux a dummy RPC is
+		 * performed to let Linux take the IRQ through the normal
+		 * vector.
+		 */
+		break;
+	case OPTEE_SMC_RPC_FUNC_CMD:
+		shm = reg_pair_to_ptr(param->a1, param->a2);
+		handle_rpc_func_cmd(ctx, optee, shm);
+		break;
+	default:
+		pr_warn("Unknown RPC func 0x%x\n",
+			(u32)OPTEE_SMC_RETURN_GET_RPC_FUNC(param->a0));
+		break;
+	}
+
+	param->a0 = OPTEE_SMC_CALL_RETURN_FROM_RPC;
+}

drivers/tee/optee/supp.c

+/*
+ * Copyright (c) 2015, Linaro Limited
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include "optee_private.h"
+
+void optee_supp_init(struct optee_supp *supp)
+{
+	memset(supp, 0, sizeof(*supp));
+	mutex_init(&supp->ctx_mutex);
+	mutex_init(&supp->thrd_mutex);
+	mutex_init(&supp->supp_mutex);
+	init_completion(&supp->data_to_supp);
+	init_completion(&supp->data_from_supp);
+}
+
+void optee_supp_uninit(struct optee_supp *supp)
+{
+	mutex_destroy(&supp->ctx_mutex);
+	mutex_destroy(&supp->thrd_mutex);
+	mutex_destroy(&supp->supp_mutex);
+}
+
+/**
+ * optee_supp_thrd_req() - request service from supplicant
+ * @ctx:	context doing the request
+ * @func:	function requested
+ * @num_params:	number of elements in @param array
+ * @param:	parameters for function
+ *
+ * Returns result of operation to be passed to secure world
+ */
+u32 optee_supp_thrd_req(struct tee_context *ctx, u32 func, size_t num_params,
+			struct tee_param *param)
+{
+	bool interruptable;
+	struct optee *optee = tee_get_drvdata(ctx->teedev);
+	struct optee_supp *supp = &optee->supp;
+	u32 ret;
+
+	/*
+	 * Other threads blocks here until we've copied our answer from
+	 * supplicant.
+	 */
+	while (mutex_lock_interruptible(&supp->thrd_mutex)) {
+		/* See comment below on when the RPC can be interrupted. */
+		mutex_lock(&supp->ctx_mutex);
+		interruptable = !supp->ctx;
+		mutex_unlock(&supp->ctx_mutex);
+		if (interruptable)
+			return TEEC_ERROR_COMMUNICATION;
+	}
+
+	/*
+	 * We have exclusive access now since the supplicant at this
+	 * point is either doing a
+	 * wait_for_completion_interruptible(&supp->data_to_supp) or is in
+	 * userspace still about to do the ioctl() to enter
+	 * optee_supp_recv() below.
+	 */
+
+	supp->func = func;
+	supp->num_params = num_params;
+	supp->param = param;
+	supp->req_posted = true;
+
+	/* Let supplicant get the data */
+	complete(&supp->data_to_supp);
+
+	/*
+	 * Wait for supplicant to process and return result, once we've
+	 * returned from wait_for_completion(data_from_supp) we have
+	 * exclusive access again.
+	 */
+	while (wait_for_completion_interruptible(&supp->data_from_supp)) {
+		mutex_lock(&supp->ctx_mutex);
+		interruptable = !supp->ctx;
+		if (interruptable) {
+			/*
+			 * There's no supplicant available and since the
+			 * supp->ctx_mutex currently is held none can
+			 * become available until the mutex released
+			 * again.
+			 *
+			 * Interrupting an RPC to supplicant is only
+			 * allowed as a way of slightly improving the user
+			 * experience in case the supplicant hasn't been
+			 * started yet. During normal operation the supplicant
+			 * will serve all requests in a timely manner and
+			 * interrupting then wouldn't make sense.
+			 */
+			supp->ret = TEEC_ERROR_COMMUNICATION;
+			init_completion(&supp->data_to_supp);
+		}
+		mutex_unlock(&supp->ctx_mutex);
+		if (interruptable)
+			break;
+	}
+
+	ret = supp->ret;
+	supp->param = NULL;
+	supp->req_posted = false;
+
+	/* We're done, let someone else talk to the supplicant now. */
+	mutex_unlock(&supp->thrd_mutex);
+
+	return ret;
+}
+
+/**
+ * optee_supp_recv() - receive request for supplicant
+ * @ctx:	context receiving the request
+ * @func:	requested function in supplicant
+ * @num_params:	number of elements allocated in @param, updated with number
+ *		used elements
+ * @param:	space for parameters for @func
+ *
+ * Returns 0 on success or <0 on failure
+ */
+int optee_supp_recv(struct tee_context *ctx, u32 *func, u32 *num_params,
+		    struct tee_param *param)
+{
+	struct tee_device *teedev = ctx->teedev;
+	struct optee *optee = tee_get_drvdata(teedev);
+	struct optee_supp *supp = &optee->supp;
+	int rc;
+
+	/*
+	 * In case two threads in one supplicant is calling this function
+	 * simultaneously we need to protect the data with a mutex which
+	 * we'll release before returning.
+	 */
+	mutex_lock(&supp->supp_mutex);
+
+	if (supp->supp_next_send) {
+		/*
+		 * optee_supp_recv() has been called again without
+		 * a optee_supp_send() in between. Supplicant has
+		 * probably been restarted before it was able to
+		 * write back last result. Abort last request and
+		 * wait for a new.
+		 */
+		if (supp->req_posted) {
+			supp->ret = TEEC_ERROR_COMMUNICATION;
+			supp->supp_next_send = false;
+			complete(&supp->data_from_supp);
+		}
+	}
+
+	/*
+	 * This is where supplicant will be hanging most of the
+	 * time, let's make this interruptable so we can easily
+	 * restart supplicant if needed.
+	 */
+	if (wait_for_completion_interruptible(&supp->data_to_supp)) {
+		rc = -ERESTARTSYS;
+		goto out;
+	}
+
+	/* We have exlusive access to the data */
+
+	if (*num_params < supp->num_params) {
+		/*
+		 * Not enough room for parameters, tell supplicant
+		 * it failed and abort last request.
+		 */
+		supp->ret = TEEC_ERROR_COMMUNICATION;
+		rc = -EINVAL;
+		complete(&supp->data_from_supp);
+		goto out;
+	}
+
+	*func = supp->func;
+	*num_params = supp->num_params;
+	memcpy(param, supp->param,
+	       sizeof(struct tee_param) * supp->num_params);
+
+	/* Allow optee_supp_send() below to do its work */
+	supp->supp_next_send = true;
+
+	rc = 0;
+out:
+	mutex_unlock(&supp->supp_mutex);
+	return rc;
+}
+
+/**
+ * optee_supp_send() - send result of request from supplicant
+ * @ctx:	context sending result
+ * @ret:	return value of request
+ * @num_params:	number of parameters returned
+ * @param:	returned parameters
+ *
+ * Returns 0 on success or <0 on failure.
+ */
+int optee_supp_send(struct tee_context *ctx, u32 ret, u32 num_params,
+		    struct tee_param *param)
+{
+	struct tee_device *teedev = ctx->teedev;
+	struct optee *optee = tee_get_drvdata(teedev);
+	struct optee_supp *supp = &optee->supp;
+	size_t n;
+	int rc = 0;
+
+	/*
+	 * We still have exclusive access to the data since that's how we
+	 * left it when returning from optee_supp_read().
+	 */
+
+	/* See comment on mutex in optee_supp_read() above */
+	mutex_lock(&supp->supp_mutex);
+
+	if (!supp->supp_next_send) {
+		/*
+		 * Something strange is going on, supplicant shouldn't
+		 * enter optee_supp_send() in this state
+		 */
+		rc = -ENOENT;
+		goto out;
+	}
+
+	if (num_params != supp->num_params) {
+		/*
+		 * Something is wrong, let supplicant restart. Next call to
+		 * optee_supp_recv() will give an error to the requesting
+		 * thread and release it.
+		 */
+		rc = -EINVAL;
+		goto out;
+	}
+
+	/* Update out and in/out parameters */
+	for (n = 0; n < num_params; n++) {
+		struct tee_param *p = supp->param + n;
+
+		switch (p->attr) {
+		case TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT:
+		case TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT:
+			p->u.value.a = param[n].u.value.a;
+			p->u.value.b = param[n].u.value.b;
+			p->u.value.c = param[n].u.value.c;
+			break;
+		case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT:
+		case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT:
+			p->u.memref.size = param[n].u.memref.size;
+			break;
+		default:
+			break;
+		}
+	}
+	supp->ret = ret;
+
+	/* Allow optee_supp_recv() above to do its work */
+	supp->supp_next_send = false;
+
+	/* Let the requesting thread continue */
+	complete(&supp->data_from_supp);
+out:
+	mutex_unlock(&supp->supp_mutex);
+	return rc;
+}

drivers/tee/tee_private.h

+/*
+ * Copyright (c) 2015-2016, Linaro Limited
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#ifndef TEE_PRIVATE_H
+#define TEE_PRIVATE_H
+
+#include <linux/cdev.h>
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <linux/kref.h>
+#include <linux/mutex.h>
+#include <linux/types.h>
+
+struct tee_device;
+
+/**
+ * struct tee_shm - shared memory object
+ * @teedev:	device used to allocate the object
+ * @ctx:	context using the object, if NULL the context is gone
+ * @link	link element
+ * @paddr:	physical address of the shared memory
+ * @kaddr:	virtual address of the shared memory
+ * @size:	size of shared memory
+ * @dmabuf:	dmabuf used to for exporting to user space
+ * @flags:	defined by TEE_SHM_* in tee_drv.h
+ * @id:		unique id of a shared memory object on this device
+ */
+struct tee_shm {
+	struct tee_device *teedev;
+	struct tee_context *ctx;
+	struct list_head link;
+	phys_addr_t paddr;
+	void *kaddr;
+	size_t size;
+	struct dma_buf *dmabuf;
+	u32 flags;
+	int id;
+};
+
+struct tee_shm_pool_mgr;
+
+/**
+ * struct tee_shm_pool_mgr_ops - shared memory pool manager operations
+ * @alloc:	called when allocating shared memory
+ * @free:	called when freeing shared memory
+ */
+struct tee_shm_pool_mgr_ops {
+	int (*alloc)(struct tee_shm_pool_mgr *poolmgr, struct tee_shm *shm,
+		     size_t size);
+	void (*free)(struct tee_shm_pool_mgr *poolmgr, struct tee_shm *shm);
+};
+
+/**
+ * struct tee_shm_pool_mgr - shared memory manager
+ * @ops:		operations
+ * @private_data:	private data for the shared memory manager
+ */
+struct tee_shm_pool_mgr {
+	const struct tee_shm_pool_mgr_ops *ops;
+	void *private_data;
+};
+
+/**
+ * struct tee_shm_pool - shared memory pool
+ * @private_mgr:	pool manager for shared memory only between kernel
+ *			and secure world
+ * @dma_buf_mgr:	pool manager for shared memory exported to user space
+ * @destroy:		called when destroying the pool
+ * @private_data:	private data for the pool
+ */
+struct tee_shm_pool {
+	struct tee_shm_pool_mgr private_mgr;
+	struct tee_shm_pool_mgr dma_buf_mgr;
+	void (*destroy)(struct tee_shm_pool *pool);
+	void *private_data;
+};
+
+#define TEE_DEVICE_FLAG_REGISTERED	0x1
+#define TEE_MAX_DEV_NAME_LEN		32
+
+/**
+ * struct tee_device - TEE Device representation
+ * @name:	name of device
+ * @desc:	description of device
+ * @id:		unique id of device
+ * @flags:	represented by TEE_DEVICE_FLAG_REGISTERED above
+ * @dev:	embedded basic device structure
+ * @cdev:	embedded cdev
+ * @num_users:	number of active users of this device
+ * @c_no_user:	completion used when unregistering the device
+ * @mutex:	mutex protecting @num_users and @idr
+ * @idr:	register of shared memory object allocated on this device
+ * @pool:	shared memory pool
+ */
+struct tee_device {
+	char name[TEE_MAX_DEV_NAME_LEN];
+	const struct tee_desc *desc;
+	int id;
+	unsigned int flags;
+
+	struct device dev;
+	struct cdev cdev;
+
+	size_t num_users;
+	struct completion c_no_users;
+	struct mutex mutex;	/* protects num_users and idr */
+
+	struct idr idr;
+	struct tee_shm_pool *pool;
+};
+
+int tee_shm_init(void);
+
+int tee_shm_get_fd(struct tee_shm *shm);
+
+bool tee_device_get(struct tee_device *teedev);
+void tee_device_put(struct tee_device *teedev);
+
+#endif /*TEE_PRIVATE_H*/

drivers/tee/tee_shm.c

+/*
+ * Copyright (c) 2015-2016, Linaro Limited
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/device.h>
+#include <linux/dma-buf.h>
+#include <linux/fdtable.h>
+#include <linux/idr.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/tee_drv.h>
+#include "tee_private.h"
+
+static void tee_shm_release(struct tee_shm *shm)
+{
+	struct tee_device *teedev = shm->teedev;
+	struct tee_shm_pool_mgr *poolm;
+
+	mutex_lock(&teedev->mutex);
+	idr_remove(&teedev->idr, shm->id);
+	if (shm->ctx)
+		list_del(&shm->link);
+	mutex_unlock(&teedev->mutex);
+
+	if (shm->flags & TEE_SHM_DMA_BUF)
+		poolm = &teedev->pool->dma_buf_mgr;
+	else
+		poolm = &teedev->pool->private_mgr;
+
+	poolm->ops->free(poolm, shm);
+	kfree(shm);
+
+	tee_device_put(teedev);
+}
+
+static struct sg_table *tee_shm_op_map_dma_buf(struct dma_buf_attachment
+			*attach, enum dma_data_direction dir)
+{
+	return NULL;
+}
+
+static void tee_shm_op_unmap_dma_buf(struct dma_buf_attachment *attach,
+				     struct sg_table *table,
+				     enum dma_data_direction dir)
+{
+}
+
+static void tee_shm_op_release(struct dma_buf *dmabuf)
+{
+	struct tee_shm *shm = dmabuf->priv;
+
+	tee_shm_release(shm);
+}
+
+static void *tee_shm_op_kmap_atomic(struct dma_buf *dmabuf, unsigned long pgnum)
+{
+	return NULL;
+}
+
+static void *tee_shm_op_kmap(struct dma_buf *dmabuf, unsigned long pgnum)
+{
+	return NULL;
+}
+
+static int tee_shm_op_mmap(struct dma_buf *dmabuf, struct vm_area_struct *vma)
+{
+	struct tee_shm *shm = dmabuf->priv;
+	size_t size = vma->vm_end - vma->vm_start;
+
+	return remap_pfn_range(vma, vma->vm_start, shm->paddr >> PAGE_SHIFT,
+			       size, vma->vm_page_prot);
+}
+
+static struct dma_buf_ops tee_shm_dma_buf_ops = {
+	.map_dma_buf = tee_shm_op_map_dma_buf,
+	.unmap_dma_buf = tee_shm_op_unmap_dma_buf,
+	.release = tee_shm_op_release,
+	.kmap_atomic = tee_shm_op_kmap_atomic,
+	.kmap = tee_shm_op_kmap,
+	.mmap = tee_shm_op_mmap,
+};
+
+/**
+ * tee_shm_alloc() - Allocate shared memory
+ * @ctx:	Context that allocates the shared memory
+ * @size:	Requested size of shared memory
+ * @flags:	Flags setting properties for the requested shared memory.
+ *
+ * Memory allocated as global shared memory is automatically freed when the
+ * TEE file pointer is closed. The @flags field uses the bits defined by
+ * TEE_SHM_* in <linux/tee_drv.h>. TEE_SHM_MAPPED must currently always be
+ * set. If TEE_SHM_DMA_BUF global shared memory will be allocated and
+ * associated with a dma-buf handle, else driver private memory.
+ */
+struct tee_shm *tee_shm_alloc(struct tee_context *ctx, size_t size, u32 flags)
+{
+	struct tee_device *teedev = ctx->teedev;
+	struct tee_shm_pool_mgr *poolm = NULL;
+	struct tee_shm *shm;
+	void *ret;
+	int rc;
+
+	if (!(flags & TEE_SHM_MAPPED)) {
+		dev_err(teedev->dev.parent,
+			"only mapped allocations supported\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	if ((flags & ~(TEE_SHM_MAPPED | TEE_SHM_DMA_BUF))) {
+		dev_err(teedev->dev.parent, "invalid shm flags 0x%x", flags);
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (!tee_device_get(teedev))
+		return ERR_PTR(-EINVAL);
+
+	if (!teedev->pool) {
+		/* teedev has been detached from driver */
+		ret = ERR_PTR(-EINVAL);
+		goto err_dev_put;
+	}
+
+	shm = kzalloc(sizeof(*shm), GFP_KERNEL);
+	if (!shm) {
+		ret = ERR_PTR(-ENOMEM);
+		goto err_dev_put;
+	}
+
+	shm->flags = flags;
+	shm->teedev = teedev;
+	shm->ctx = ctx;
+	if (flags & TEE_SHM_DMA_BUF)
+		poolm = &teedev->pool->dma_buf_mgr;
+	else
+		poolm = &teedev->pool->private_mgr;
+
+	rc = poolm->ops->alloc(poolm, shm, size);
+	if (rc) {
+		ret = ERR_PTR(rc);
+		goto err_kfree;
+	}
+
+	mutex_lock(&teedev->mutex);
+	shm->id = idr_alloc(&teedev->idr, shm, 1, 0, GFP_KERNEL);
+	mutex_unlock(&teedev->mutex);
+	if (shm->id < 0) {
+		ret = ERR_PTR(shm->id);
+		goto err_pool_free;
+	}
+
+	if (flags & TEE_SHM_DMA_BUF) {
+		DEFINE_DMA_BUF_EXPORT_INFO(exp_info);
+
+		exp_info.ops = &tee_shm_dma_buf_ops;
+		exp_info.size = shm->size;
+		exp_info.flags = O_RDWR;
+		exp_info.priv = shm;
+
+		shm->dmabuf = dma_buf_export(&exp_info);
+		if (IS_ERR(shm->dmabuf)) {
+			ret = ERR_CAST(shm->dmabuf);
+			goto err_rem;
+		}
+	}
+	mutex_lock(&teedev->mutex);
+	list_add_tail(&shm->link, &ctx->list_shm);
+	mutex_unlock(&teedev->mutex);
+
+	return shm;
+err_rem:
+	mutex_lock(&teedev->mutex);
+	idr_remove(&teedev->idr, shm->id);
+	mutex_unlock(&teedev->mutex);
+err_pool_free:
+	poolm->ops->free(poolm, shm);
+err_kfree:
+	kfree(shm);
+err_dev_put:
+	tee_device_put(teedev);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(tee_shm_alloc);
+
+/**
+ * tee_shm_get_fd() - Increase reference count and return file descriptor
+ * @shm:	Shared memory handle
+ * @returns user space file descriptor to shared memory
+ */
+int tee_shm_get_fd(struct tee_shm *shm)
+{
+	u32 req_flags = TEE_SHM_MAPPED | TEE_SHM_DMA_BUF;
+	int fd;
+
+	if ((shm->flags & req_flags) != req_flags)
+		return -EINVAL;
+
+	fd = dma_buf_fd(shm->dmabuf, O_CLOEXEC);
+	if (fd >= 0)
+		get_dma_buf(shm->dmabuf);
+	return fd;
+}
+
+/**
+ * tee_shm_free() - Free shared memory
+ * @shm:	Handle to shared memory to free
+ */
+void tee_shm_free(struct tee_shm *shm)
+{
+	/*
+	 * dma_buf_put() decreases the dmabuf reference counter and will
+	 * call tee_shm_release() when the last reference is gone.
+	 *
+	 * In the case of driver private memory we call tee_shm_release
+	 * directly instead as it doesn't have a reference counter.
+	 */
+	if (shm->flags & TEE_SHM_DMA_BUF)
+		dma_buf_put(shm->dmabuf);
+	else
+		tee_shm_release(shm);
+}
+EXPORT_SYMBOL_GPL(tee_shm_free);
+
+/**
+ * tee_shm_va2pa() - Get physical address of a virtual address
+ * @shm:	Shared memory handle
+ * @va:		Virtual address to tranlsate
+ * @pa:		Returned physical address
+ * @returns 0 on success and < 0 on failure
+ */
+int tee_shm_va2pa(struct tee_shm *shm, void *va, phys_addr_t *pa)
+{
+	/* Check that we're in the range of the shm */
+	if ((char *)va < (char *)shm->kaddr)
+		return -EINVAL;
+	if ((char *)va >= ((char *)shm->kaddr + shm->size))
+		return -EINVAL;
+
+	return tee_shm_get_pa(
+			shm, (unsigned long)va - (unsigned long)shm->kaddr, pa);
+}
+EXPORT_SYMBOL_GPL(tee_shm_va2pa);
+
+/**
+ * tee_shm_pa2va() - Get virtual address of a physical address
+ * @shm:	Shared memory handle
+ * @pa:		Physical address to tranlsate
+ * @va:		Returned virtual address
+ * @returns 0 on success and < 0 on failure
+ */
+int tee_shm_pa2va(struct tee_shm *shm, phys_addr_t pa, void **va)
+{
+	/* Check that we're in the range of the shm */
+	if (pa < shm->paddr)
+		return -EINVAL;
+	if (pa >= (shm->paddr + shm->size))
+		return -EINVAL;
+
+	if (va) {
+		void *v = tee_shm_get_va(shm, pa - shm->paddr);
+
+		if (IS_ERR(v))
+			return PTR_ERR(v);
+		*va = v;
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(tee_shm_pa2va);
+
+/**
+ * tee_shm_get_va() - Get virtual address of a shared memory plus an offset
+ * @shm:	Shared memory handle
+ * @offs:	Offset from start of this shared memory
+ * @returns virtual address of the shared memory + offs if offs is within
+ *	the bounds of this shared memory, else an ERR_PTR
+ */
+void *tee_shm_get_va(struct tee_shm *shm, size_t offs)
+{
+	if (offs >= shm->size)
+		return ERR_PTR(-EINVAL);
+	return (char *)shm->kaddr + offs;
+}
+EXPORT_SYMBOL_GPL(tee_shm_get_va);
+
+/**
+ * tee_shm_get_pa() - Get physical address of a shared memory plus an offset
+ * @shm:	Shared memory handle
+ * @offs:	Offset from start of this shared memory
+ * @pa:		Physical address to return
+ * @returns 0 if offs is within the bounds of this shared memory, else an
+ *	error code.
+ */
+int tee_shm_get_pa(struct tee_shm *shm, size_t offs, phys_addr_t *pa)
+{
+	if (offs >= shm->size)
+		return -EINVAL;
+	if (pa)
+		*pa = shm->paddr + offs;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(tee_shm_get_pa);
+
+/**
+ * tee_shm_get_from_id() - Find shared memory object and increase reference
+ * count
+ * @ctx:	Context owning the shared memory
+ * @id:		Id of shared memory object
+ * @returns a pointer to 'struct tee_shm' on success or an ERR_PTR on failure
+ */
+struct tee_shm *tee_shm_get_from_id(struct tee_context *ctx, int id)
+{
+	struct tee_device *teedev;
+	struct tee_shm *shm;
+
+	if (!ctx)
+		return ERR_PTR(-EINVAL);
+
+	teedev = ctx->teedev;
+	mutex_lock(&teedev->mutex);
+	shm = idr_find(&teedev->idr, id);
+	if (!shm || shm->ctx != ctx)
+		shm = ERR_PTR(-EINVAL);
+	else if (shm->flags & TEE_SHM_DMA_BUF)
+		get_dma_buf(shm->dmabuf);
+	mutex_unlock(&teedev->mutex);
+	return shm;
+}
+EXPORT_SYMBOL_GPL(tee_shm_get_from_id);
+
+/**
+ * tee_shm_get_id() - Get id of a shared memory object
+ * @shm:	Shared memory handle
+ * @returns id
+ */
+int tee_shm_get_id(struct tee_shm *shm)
+{
+	return shm->id;
+}
+EXPORT_SYMBOL_GPL(tee_shm_get_id);
+
+/**
+ * tee_shm_put() - Decrease reference count on a shared memory handle
+ * @shm:	Shared memory handle
+ */
+void tee_shm_put(struct tee_shm *shm)
+{
+	if (shm->flags & TEE_SHM_DMA_BUF)
+		dma_buf_put(shm->dmabuf);
+}
+EXPORT_SYMBOL_GPL(tee_shm_put);

drivers/tee/tee_shm_pool.c

+/*
+ * Copyright (c) 2015, Linaro Limited
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/device.h>
+#include <linux/dma-buf.h>
+#include <linux/genalloc.h>
+#include <linux/slab.h>
+#include <linux/tee_drv.h>
+#include "tee_private.h"
+
+static int pool_op_gen_alloc(struct tee_shm_pool_mgr *poolm,
+			     struct tee_shm *shm, size_t size)
+{
+	unsigned long va;
+	struct gen_pool *genpool = poolm->private_data;
+	size_t s = roundup(size, 1 << genpool->min_alloc_order);
+
+	va = gen_pool_alloc(genpool, s);
+	if (!va)
+		return -ENOMEM;
+
+	memset((void *)va, 0, s);
+	shm->kaddr = (void *)va;
+	shm->paddr = gen_pool_virt_to_phys(genpool, va);
+	shm->size = s;
+	return 0;
+}
+
+static void pool_op_gen_free(struct tee_shm_pool_mgr *poolm,
+			     struct tee_shm *shm)
+{
+	gen_pool_free(poolm->private_data, (unsigned long)shm->kaddr,
+		      shm->size);
+	shm->kaddr = NULL;
+}
+
+static const struct tee_shm_pool_mgr_ops pool_ops_generic = {
+	.alloc = pool_op_gen_alloc,
+	.free = pool_op_gen_free,
+};
+
+static void pool_res_mem_destroy(struct tee_shm_pool *pool)
+{
+	gen_pool_destroy(pool->private_mgr.private_data);
+	gen_pool_destroy(pool->dma_buf_mgr.private_data);
+}
+
+static int pool_res_mem_mgr_init(struct tee_shm_pool_mgr *mgr,
+				 struct tee_shm_pool_mem_info *info,
+				 int min_alloc_order)
+{
+	size_t page_mask = PAGE_SIZE - 1;
+	struct gen_pool *genpool = NULL;
+	int rc;
+
+	/*
+	 * Start and end must be page aligned
+	 */
+	if ((info->vaddr & page_mask) || (info->paddr & page_mask) ||
+	    (info->size & page_mask))
+		return -EINVAL;
+
+	genpool = gen_pool_create(min_alloc_order, -1);
+	if (!genpool)
+		return -ENOMEM;
+
+	gen_pool_set_algo(genpool, gen_pool_best_fit, NULL);
+	rc = gen_pool_add_virt(genpool, info->vaddr, info->paddr, info->size,
+			       -1);
+	if (rc) {
+		gen_pool_destroy(genpool);
+		return rc;
+	}
+
+	mgr->private_data = genpool;
+	mgr->ops = &pool_ops_generic;
+	return 0;
+}
+
+/**
+ * tee_shm_pool_alloc_res_mem() - Create a shared memory pool from reserved
+ * memory range
+ * @priv_info:	Information for driver private shared memory pool
+ * @dmabuf_info: Information for dma-buf shared memory pool
+ *
+ * Start and end of pools will must be page aligned.
+ *
+ * Allocation with the flag TEE_SHM_DMA_BUF set will use the range supplied
+ * in @dmabuf, others will use the range provided by @priv.
+ *
+ * @returns pointer to a 'struct tee_shm_pool' or an ERR_PTR on failure.
+ */
+struct tee_shm_pool *
+tee_shm_pool_alloc_res_mem(struct tee_shm_pool_mem_info *priv_info,
+			   struct tee_shm_pool_mem_info *dmabuf_info)
+{
+	struct tee_shm_pool *pool = NULL;
+	int ret;
+
+	pool = kzalloc(sizeof(*pool), GFP_KERNEL);
+	if (!pool) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	/*
+	 * Create the pool for driver private shared memory
+	 */
+	ret = pool_res_mem_mgr_init(&pool->private_mgr, priv_info,
+				    3 /* 8 byte aligned */);
+	if (ret)
+		goto err;
+
+	/*
+	 * Create the pool for dma_buf shared memory
+	 */
+	ret = pool_res_mem_mgr_init(&pool->dma_buf_mgr, dmabuf_info,
+				    PAGE_SHIFT);
+	if (ret)
+		goto err;
+
+	pool->destroy = pool_res_mem_destroy;
+	return pool;
+err:
+	if (ret == -ENOMEM)
+		pr_err("%s: can't allocate memory for res_mem shared memory pool\n", __func__);
+	if (pool && pool->private_mgr.private_data)
+		gen_pool_destroy(pool->private_mgr.private_data);
+	kfree(pool);
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(tee_shm_pool_alloc_res_mem);
+
+/**
+ * tee_shm_pool_free() - Free a shared memory pool
+ * @pool:	The shared memory pool to free
+ *
+ * There must be no remaining shared memory allocated from this pool when
+ * this function is called.
+ */
+void tee_shm_pool_free(struct tee_shm_pool *pool)
+{
+	pool->destroy(pool);
+	kfree(pool);
+}
+EXPORT_SYMBOL_GPL(tee_shm_pool_free);

include/linux/tee_drv.h

+/*
+ * Copyright (c) 2015-2016, Linaro Limited
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __TEE_DRV_H
+#define __TEE_DRV_H
+
+#include <linux/types.h>
+#include <linux/idr.h>
+#include <linux/list.h>
+#include <linux/tee.h>
+
+/*
+ * The file describes the API provided by the generic TEE driver to the
+ * specific TEE driver.
+ */
+
+#define TEE_SHM_MAPPED		0x1	/* Memory mapped by the kernel */
+#define TEE_SHM_DMA_BUF		0x2	/* Memory with dma-buf handle */
+
+struct tee_device;
+struct tee_shm;
+struct tee_shm_pool;
+
+/**
+ * struct tee_context - driver specific context on file pointer data
+ * @teedev:	pointer to this drivers struct tee_device
+ * @list_shm:	List of shared memory object owned by this context
+ * @data:	driver specific context data, managed by the driver
+ */
+struct tee_context {
+	struct tee_device *teedev;
+	struct list_head list_shm;
+	void *data;
+};
+
+struct tee_param_memref {
+	size_t shm_offs;
+	size_t size;
+	struct tee_shm *shm;
+};
+
+struct tee_param_value {
+	u64 a;
+	u64 b;
+	u64 c;
+};
+
+struct tee_param {
+	u64 attr;
+	union {
+		struct tee_param_memref memref;
+		struct tee_param_value value;
+	} u;
+};
+
+/**
+ * struct tee_driver_ops - driver operations vtable
+ * @get_version:	returns version of driver
+ * @open:		called when the device file is opened
+ * @release:		release this open file
+ * @open_session:	open a new session
+ * @close_session:	close a session
+ * @invoke_func:	invoke a trusted function
+ * @cancel_req:		request cancel of an ongoing invoke or open
+ * @supp_revc:		called for supplicant to get a command
+ * @supp_send:		called for supplicant to send a response
+ */
+struct tee_driver_ops {
+	void (*get_version)(struct tee_device *teedev,
+			    struct tee_ioctl_version_data *vers);
+	int (*open)(struct tee_context *ctx);
+	void (*release)(struct tee_context *ctx);
+	int (*open_session)(struct tee_context *ctx,
+			    struct tee_ioctl_open_session_arg *arg,
+			    struct tee_param *param);
+	int (*close_session)(struct tee_context *ctx, u32 session);
+	int (*invoke_func)(struct tee_context *ctx,
+			   struct tee_ioctl_invoke_arg *arg,
+			   struct tee_param *param);
+	int (*cancel_req)(struct tee_context *ctx, u32 cancel_id, u32 session);
+	int (*supp_recv)(struct tee_context *ctx, u32 *func, u32 *num_params,
+			 struct tee_param *param);
+	int (*supp_send)(struct tee_context *ctx, u32 ret, u32 num_params,
+			 struct tee_param *param);
+};
+
+/**
+ * struct tee_desc - Describes the TEE driver to the subsystem
+ * @name:	name of driver
+ * @ops:	driver operations vtable
+ * @owner:	module providing the driver
+ * @flags:	Extra properties of driver, defined by TEE_DESC_* below
+ */
+#define TEE_DESC_PRIVILEGED	0x1
+struct tee_desc {
+	const char *name;
+	const struct tee_driver_ops *ops;
+	struct module *owner;
+	u32 flags;
+};
+
+/**
+ * tee_device_alloc() - Allocate a new struct tee_device instance
+ * @teedesc:	Descriptor for this driver
+ * @dev:	Parent device for this device
+ * @pool:	Shared memory pool, NULL if not used
+ * @driver_data: Private driver data for this device
+ *
+ * Allocates a new struct tee_device instance. The device is
+ * removed by tee_device_unregister().
+ *
+ * @returns a pointer to a 'struct tee_device' or an ERR_PTR on failure
+ */
+struct tee_device *tee_device_alloc(const struct tee_desc *teedesc,
+				    struct device *dev,
+				    struct tee_shm_pool *pool,
+				    void *driver_data);
+
+/**
+ * tee_device_register() - Registers a TEE device
+ * @teedev:	Device to register
+ *
+ * tee_device_unregister() need to be called to remove the @teedev if
+ * this function fails.
+ *
+ * @returns < 0 on failure
+ */
+int tee_device_register(struct tee_device *teedev);
+
+/**
+ * tee_device_unregister() - Removes a TEE device
+ * @teedev:	Device to unregister
+ *
+ * This function should be called to remove the @teedev even if
+ * tee_device_register() hasn't been called yet. Does nothing if
+ * @teedev is NULL.
+ */
+void tee_device_unregister(struct tee_device *teedev);
+
+/**
+ * struct tee_shm_pool_mem_info - holds information needed to create a shared
+ * memory pool
+ * @vaddr:	Virtual address of start of pool
+ * @paddr:	Physical address of start of pool
+ * @size:	Size in bytes of the pool
+ */
+struct tee_shm_pool_mem_info {
+	unsigned long vaddr;
+	phys_addr_t paddr;
+	size_t size;
+};
+
+/**
+ * tee_shm_pool_alloc_res_mem() - Create a shared memory pool from reserved
+ * memory range
+ * @priv_info:	 Information for driver private shared memory pool
+ * @dmabuf_info: Information for dma-buf shared memory pool
+ *
+ * Start and end of pools will must be page aligned.
+ *
+ * Allocation with the flag TEE_SHM_DMA_BUF set will use the range supplied
+ * in @dmabuf, others will use the range provided by @priv.
+ *
+ * @returns pointer to a 'struct tee_shm_pool' or an ERR_PTR on failure.
+ */
+struct tee_shm_pool *
+tee_shm_pool_alloc_res_mem(struct tee_shm_pool_mem_info *priv_info,
+			   struct tee_shm_pool_mem_info *dmabuf_info);
+
+/**
+ * tee_shm_pool_free() - Free a shared memory pool
+ * @pool:	The shared memory pool to free
+ *
+ * The must be no remaining shared memory allocated from this pool when
+ * this function is called.
+ */
+void tee_shm_pool_free(struct tee_shm_pool *pool);
+
+/**
+ * tee_get_drvdata() - Return driver_data pointer
+ * @returns the driver_data pointer supplied to tee_register().
+ */
+void *tee_get_drvdata(struct tee_device *teedev);
+
+/**
+ * tee_shm_alloc() - Allocate shared memory
+ * @ctx:	Context that allocates the shared memory
+ * @size:	Requested size of shared memory
+ * @flags:	Flags setting properties for the requested shared memory.
+ *
+ * Memory allocated as global shared memory is automatically freed when the
+ * TEE file pointer is closed. The @flags field uses the bits defined by
+ * TEE_SHM_* above. TEE_SHM_MAPPED must currently always be set. If
+ * TEE_SHM_DMA_BUF global shared memory will be allocated and associated
+ * with a dma-buf handle, else driver private memory.
+ *
+ * @returns a pointer to 'struct tee_shm'
+ */
+struct tee_shm *tee_shm_alloc(struct tee_context *ctx, size_t size, u32 flags);
+
+/**
+ * tee_shm_free() - Free shared memory
+ * @shm:	Handle to shared memory to free
+ */
+void tee_shm_free(struct tee_shm *shm);
+
+/**
+ * tee_shm_put() - Decrease reference count on a shared memory handle
+ * @shm:	Shared memory handle
+ */
+void tee_shm_put(struct tee_shm *shm);
+
+/**
+ * tee_shm_va2pa() - Get physical address of a virtual address
+ * @shm:	Shared memory handle
+ * @va:		Virtual address to tranlsate
+ * @pa:		Returned physical address
+ * @returns 0 on success and < 0 on failure
+ */
+int tee_shm_va2pa(struct tee_shm *shm, void *va, phys_addr_t *pa);
+
+/**
+ * tee_shm_pa2va() - Get virtual address of a physical address
+ * @shm:	Shared memory handle
+ * @pa:		Physical address to tranlsate
+ * @va:		Returned virtual address
+ * @returns 0 on success and < 0 on failure
+ */
+int tee_shm_pa2va(struct tee_shm *shm, phys_addr_t pa, void **va);
+
+/**
+ * tee_shm_get_va() - Get virtual address of a shared memory plus an offset
+ * @shm:	Shared memory handle
+ * @offs:	Offset from start of this shared memory
+ * @returns virtual address of the shared memory + offs if offs is within
+ *	the bounds of this shared memory, else an ERR_PTR
+ */
+void *tee_shm_get_va(struct tee_shm *shm, size_t offs);
+
+/**
+ * tee_shm_get_pa() - Get physical address of a shared memory plus an offset
+ * @shm:	Shared memory handle
+ * @offs:	Offset from start of this shared memory
+ * @pa:		Physical address to return
+ * @returns 0 if offs is within the bounds of this shared memory, else an
+ *	error code.
+ */
+int tee_shm_get_pa(struct tee_shm *shm, size_t offs, phys_addr_t *pa);
+
+/**
+ * tee_shm_get_id() - Get id of a shared memory object
+ * @shm:	Shared memory handle
+ * @returns id
+ */
+int tee_shm_get_id(struct tee_shm *shm);
+
+/**
+ * tee_shm_get_from_id() - Find shared memory object and increase reference
+ * count
+ * @ctx:	Context owning the shared memory
+ * @id:		Id of shared memory object
+ * @returns a pointer to 'struct tee_shm' on success or an ERR_PTR on failure
+ */
+struct tee_shm *tee_shm_get_from_id(struct tee_context *ctx, int id);
+
+#endif /*__TEE_DRV_H*/