Commit e13ce26b authored by Franky Lin's avatar Franky Lin Committed by John W. Linville

brcmfmac: replace brcmf_sdcard_reg_write with brcmf_sdio_regwl

Use the newly introduced brcmf_sdio_regwl to replace
brcmf_sdcard_reg_write as part of the SDIO WiFi dongle register
access interface clean up.
Reviewed-by: default avatarPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: default avatarArend van Spriel <arend@broadcom.com>
Signed-off-by: default avatarFranky Lin <frankyl@broadcom.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 79ae3957
......@@ -298,38 +298,6 @@ void brcmf_sdio_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr,
*ret = retval;
}
u32 brcmf_sdcard_reg_write(struct brcmf_sdio_dev *sdiodev, u32 addr, u32 data)
{
int status;
uint bar0 = addr & ~SBSDIO_SB_OFT_ADDR_MASK;
int err = 0;
brcmf_dbg(INFO, "fun = 1, addr = 0x%x, uint32data = 0x%x\n",
addr, data);
if (bar0 != sdiodev->sbwad) {
err = brcmf_sdcard_set_sbaddr_window(sdiodev, bar0);
if (err)
return err;
sdiodev->sbwad = bar0;
}
addr &= SBSDIO_SB_OFT_ADDR_MASK;
addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
status =
brcmf_sdioh_request_word(sdiodev, SDIOH_WRITE, SDIO_FUNC_1,
addr, &data, 4);
sdiodev->regfail = (status != 0);
if (status == 0)
return 0;
brcmf_dbg(ERROR, "error writing 0x%08x to addr 0x%04x\n",
data, addr);
return 0xFFFFFFFF;
}
bool brcmf_sdcard_regfail(struct brcmf_sdio_dev *sdiodev)
{
return sdiodev->regfail;
......
......@@ -653,13 +653,13 @@ static void
w_sdreg32(struct brcmf_sdio *bus, u32 regval, u32 reg_offset, u32 *retryvar)
{
u8 idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV);
int ret;
*retryvar = 0;
do {
brcmf_sdcard_reg_write(bus->sdiodev,
brcmf_sdio_regwl(bus->sdiodev,
bus->ci->c_inf[idx].base + reg_offset,
regval);
} while (brcmf_sdcard_regfail(bus->sdiodev) &&
(++(*retryvar) <= retry_limit));
regval, &ret);
} while ((ret != 0) && (++(*retryvar) <= retry_limit));
if (*retryvar) {
bus->regfails += (*retryvar-1);
if (*retryvar > retry_limit)
......@@ -3751,7 +3751,7 @@ brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus, u32 regsva)
reg_addr = bus->ci->c_inf[idx].base +
offsetof(struct sdpcmd_regs, corecontrol);
reg_val = brcmf_sdio_regrl(bus->sdiodev, reg_addr, NULL);
brcmf_sdcard_reg_write(bus->sdiodev, reg_addr, reg_val | CC_BPRESEN);
brcmf_sdio_regwl(bus->sdiodev, reg_addr, reg_val | CC_BPRESEN, NULL);
brcmu_pktq_init(&bus->txq, (PRIOMASK + 1), TXQLEN);
......
......@@ -171,9 +171,8 @@ brcmf_sdio_sb_coredisable(struct brcmf_sdio_dev *sdiodev,
*/
regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbtmstatelow),
NULL);
brcmf_sdcard_reg_write(sdiodev,
CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
regdata | SSB_TMSLOW_REJECT);
brcmf_sdio_regwl(sdiodev, CORE_SB(base, sbtmstatelow),
regdata | SSB_TMSLOW_REJECT, NULL);
regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbtmstatelow),
NULL);
......@@ -196,9 +195,8 @@ brcmf_sdio_sb_coredisable(struct brcmf_sdio_dev *sdiodev,
CORE_SB(base, sbimstate),
NULL);
regdata |= SSB_IMSTATE_REJECT;
brcmf_sdcard_reg_write(sdiodev,
CORE_SB(ci->c_inf[idx].base, sbimstate),
regdata);
brcmf_sdio_regwl(sdiodev, CORE_SB(base, sbimstate),
regdata, NULL);
regdata = brcmf_sdio_regrl(sdiodev,
CORE_SB(base, sbimstate),
NULL);
......@@ -210,10 +208,10 @@ brcmf_sdio_sb_coredisable(struct brcmf_sdio_dev *sdiodev,
}
/* set reset and reject while enabling the clocks */
brcmf_sdcard_reg_write(sdiodev,
CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
(SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET));
regdata = SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET;
brcmf_sdio_regwl(sdiodev, CORE_SB(base, sbtmstatelow),
regdata, NULL);
regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbtmstatelow),
NULL);
udelay(10);
......@@ -226,16 +224,14 @@ brcmf_sdio_sb_coredisable(struct brcmf_sdio_dev *sdiodev,
CORE_SB(base, sbimstate),
NULL);
regdata &= ~SSB_IMSTATE_REJECT;
brcmf_sdcard_reg_write(sdiodev,
CORE_SB(ci->c_inf[idx].base, sbimstate),
regdata);
brcmf_sdio_regwl(sdiodev, CORE_SB(base, sbimstate),
regdata, NULL);
}
}
/* leave reset and reject asserted */
brcmf_sdcard_reg_write(sdiodev,
CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
(SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET));
brcmf_sdio_regwl(sdiodev, CORE_SB(base, sbtmstatelow),
(SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET), NULL);
udelay(1);
}
......@@ -255,13 +251,13 @@ brcmf_sdio_ai_coredisable(struct brcmf_sdio_dev *sdiodev,
if ((regdata & BCMA_RESET_CTL_RESET) != 0)
return;
brcmf_sdcard_reg_write(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, 0);
brcmf_sdio_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, 0, NULL);
regdata = brcmf_sdio_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL,
NULL);
udelay(10);
brcmf_sdcard_reg_write(sdiodev, ci->c_inf[idx].wrapbase+BCMA_RESET_CTL,
BCMA_RESET_CTL_RESET);
brcmf_sdio_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_RESET_CTL,
BCMA_RESET_CTL_RESET, NULL);
udelay(1);
}
......@@ -285,9 +281,10 @@ brcmf_sdio_sb_resetcore(struct brcmf_sdio_dev *sdiodev,
* set reset while enabling the clock and
* forcing them on throughout the core
*/
brcmf_sdcard_reg_write(sdiodev,
brcmf_sdio_regwl(sdiodev,
CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET);
SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET,
NULL);
regdata = brcmf_sdio_regrl(sdiodev,
CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
NULL);
......@@ -298,30 +295,30 @@ brcmf_sdio_sb_resetcore(struct brcmf_sdio_dev *sdiodev,
CORE_SB(ci->c_inf[idx].base, sbtmstatehigh),
NULL);
if (regdata & SSB_TMSHIGH_SERR)
brcmf_sdcard_reg_write(sdiodev,
CORE_SB(ci->c_inf[idx].base, sbtmstatehigh), 0);
brcmf_sdio_regwl(sdiodev,
CORE_SB(ci->c_inf[idx].base, sbtmstatehigh),
0, NULL);
regdata = brcmf_sdio_regrl(sdiodev,
CORE_SB(ci->c_inf[idx].base, sbimstate),
NULL);
if (regdata & (SSB_IMSTATE_IBE | SSB_IMSTATE_TO))
brcmf_sdcard_reg_write(sdiodev,
brcmf_sdio_regwl(sdiodev,
CORE_SB(ci->c_inf[idx].base, sbimstate),
regdata & ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO));
regdata & ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO),
NULL);
/* clear reset and allow it to propagate throughout the core */
brcmf_sdcard_reg_write(sdiodev,
CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK);
brcmf_sdio_regwl(sdiodev, CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK, NULL);
regdata = brcmf_sdio_regrl(sdiodev,
CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
NULL);
udelay(1);
/* leave clock enabled */
brcmf_sdcard_reg_write(sdiodev,
CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
SSB_TMSLOW_CLOCK);
brcmf_sdio_regwl(sdiodev, CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
SSB_TMSLOW_CLOCK, NULL);
regdata = brcmf_sdio_regrl(sdiodev,
CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
NULL);
......@@ -341,16 +338,16 @@ brcmf_sdio_ai_resetcore(struct brcmf_sdio_dev *sdiodev,
brcmf_sdio_ai_coredisable(sdiodev, ci, coreid);
/* now do initialization sequence */
brcmf_sdcard_reg_write(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL,
BCMA_IOCTL_FGC | BCMA_IOCTL_CLK);
brcmf_sdio_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL,
BCMA_IOCTL_FGC | BCMA_IOCTL_CLK, NULL);
regdata = brcmf_sdio_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL,
NULL);
brcmf_sdcard_reg_write(sdiodev, ci->c_inf[idx].wrapbase+BCMA_RESET_CTL,
0);
brcmf_sdio_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_RESET_CTL,
0, NULL);
udelay(1);
brcmf_sdcard_reg_write(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL,
BCMA_IOCTL_CLK);
brcmf_sdio_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL,
BCMA_IOCTL_CLK, NULL);
regdata = brcmf_sdio_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL,
NULL);
udelay(1);
......@@ -536,10 +533,10 @@ int brcmf_sdio_chip_attach(struct brcmf_sdio_dev *sdiodev,
brcmf_sdio_chip_buscoresetup(sdiodev, ci);
brcmf_sdcard_reg_write(sdiodev,
CORE_CC_REG(ci->c_inf[0].base, gpiopullup), 0);
brcmf_sdcard_reg_write(sdiodev,
CORE_CC_REG(ci->c_inf[0].base, gpiopulldown), 0);
brcmf_sdio_regwl(sdiodev, CORE_CC_REG(ci->c_inf[0].base, gpiopullup),
0, NULL);
brcmf_sdio_regwl(sdiodev, CORE_CC_REG(ci->c_inf[0].base, gpiopulldown),
0, NULL);
*ci_ptr = ci;
return 0;
......@@ -605,9 +602,8 @@ brcmf_sdio_chip_drivestrengthinit(struct brcmf_sdio_dev *sdiodev,
}
}
brcmf_sdcard_reg_write(sdiodev,
CORE_CC_REG(ci->c_inf[0].base, chipcontrol_addr),
1);
brcmf_sdio_regwl(sdiodev, CORE_CC_REG(base, chipcontrol_addr),
1, NULL);
cc_data_temp =
brcmf_sdio_regrl(sdiodev,
CORE_CC_REG(base, chipcontrol_addr),
......@@ -615,9 +611,8 @@ brcmf_sdio_chip_drivestrengthinit(struct brcmf_sdio_dev *sdiodev,
cc_data_temp &= ~str_mask;
drivestrength_sel <<= str_shift;
cc_data_temp |= drivestrength_sel;
brcmf_sdcard_reg_write(sdiodev,
CORE_CC_REG(ci->c_inf[0].base, chipcontrol_addr),
cc_data_temp);
brcmf_sdio_regwl(sdiodev, CORE_CC_REG(base, chipcontrol_addr),
cc_data_temp, NULL);
brcmf_dbg(INFO, "SDIO: %dmA drive strength selected, set to 0x%08x\n",
drivestrength, cc_data_temp);
......
......@@ -168,14 +168,6 @@ struct brcmf_sdio_dev {
extern int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev);
extern int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev);
/* Synchronous access to device (client) core registers via CMD53 to F1.
* addr: backplane address (i.e. >= regsva from attach)
* size: register width in bytes (2 or 4)
* data: data for register write
*/
extern u32
brcmf_sdcard_reg_write(struct brcmf_sdio_dev *sdiodev, u32 addr, u32 data);
/* sdio device register access interface */
extern u8 brcmf_sdio_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret);
extern u32 brcmf_sdio_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment