[PATCH] ppc32: support for Artesyn Katana cPCI boards

This patch adds support for the Artesyn Katana 750i, 752i, and 3750.
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

arch/ppc/Kconfig

@@ -500,6 +500,12 @@ config APUS
 	  More information is available at:
 	  <http://linux-apus.sourceforge.net/>.
 
+config KATANA
+	bool "Artesyn-Katana"
+	help
+	  Select KATANA if configuring an Artesyn KATANA 750i or 3750
+	  cPCI board.
+
 config WILLOW
 	bool "Cogent-Willow"
 
@@ -701,6 +707,11 @@ config GT64260
 	depends on EV64260 || CPCI690
 	default y
 
+config MV64360
+	bool
+	depends on KATANA
+	default y
+
 config MV64X60
 	bool
 	depends on (GT64260 || MV64360)

arch/ppc/boot/simple/Makefile

@@ -84,6 +84,10 @@ zimageinitrd-$(CONFIG_GEMINI)		:= zImage.initrd-STRIPELF
          end-$(CONFIG_K2)		:= k2
    cacheflag-$(CONFIG_K2)		:= -include $(clear_L2_L3)
 
+     extra.o-$(CONFIG_KATANA)		:= misc-katana.o mv64x60_stub.o
+         end-$(CONFIG_KATANA)		:= katana
+   cacheflag-$(CONFIG_KATANA)		:= -include $(clear_L2_L3)
+
 # kconfig 'feature', only one of these will ever be 'y' at a time.
 # The rest will be unset.
 motorola := $(CONFIG_MCPN765)$(CONFIG_MVME5100)$(CONFIG_PRPMC750) \

arch/ppc/boot/simple/misc-katana.c

+/*
+ * arch/ppc/boot/simple/misc-katana.c
+ *
+ * Add birec data for Artesyn KATANA board.
+ *
+ * Author: Mark A. Greer <source@mvista.com>
+ *
+ * 2004 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/types.h>
+long	mv64x60_mpsc_clk_freq = 133333333;

arch/ppc/configs/katana_defconfig

+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.10-rc2
+# Fri Nov 19 15:17:10 2004
+#
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_HAVE_DEC_LOCK=y
+CONFIG_PPC=y
+CONFIG_PPC32=y
+CONFIG_GENERIC_NVRAM=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Processor
+#
+CONFIG_6xx=y
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_POWER3 is not set
+# CONFIG_POWER4 is not set
+# CONFIG_8xx is not set
+# CONFIG_E500 is not set
+CONFIG_ALTIVEC=y
+# CONFIG_TAU is not set
+# CONFIG_CPU_FREQ is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_NOT_COHERENT_CACHE=y
+
+#
+# Platform options
+#
+# CONFIG_PPC_MULTIPLATFORM is not set
+# CONFIG_APUS is not set
+CONFIG_KATANA=y
+# CONFIG_WILLOW is not set
+# CONFIG_PCORE is not set
+# CONFIG_POWERPMC250 is not set
+# CONFIG_SPRUCE is not set
+# CONFIG_EV64260 is not set
+# CONFIG_LOPEC is not set
+# CONFIG_MCPN765 is not set
+# CONFIG_MVME5100 is not set
+# CONFIG_PPLUS is not set
+# CONFIG_PRPMC750 is not set
+# CONFIG_PRPMC800 is not set
+# CONFIG_SANDPOINT is not set
+# CONFIG_ADIR is not set
+# CONFIG_K2 is not set
+# CONFIG_PAL4 is not set
+# CONFIG_GEMINI is not set
+# CONFIG_EST8260 is not set
+# CONFIG_SBC82xx is not set
+# CONFIG_SBS8260 is not set
+# CONFIG_RPX8260 is not set
+# CONFIG_TQM8260 is not set
+# CONFIG_ADS8272 is not set
+# CONFIG_LITE5200 is not set
+CONFIG_MV64360=y
+CONFIG_MV64X60=y
+
+#
+# Set bridge options
+#
+CONFIG_MV64X60_BASE=0xf8100000
+CONFIG_MV64X60_NEW_BASE=0xf8100000
+# CONFIG_SMP is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyMM0,9600 ip=on"
+
+#
+# Bus options
+#
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_LEGACY_PROC=y
+CONFIG_PCI_NAMES=y
+
+#
+# Advanced setup
+#
+CONFIG_ADVANCED_OPTIONS=y
+CONFIG_HIGHMEM_START=0xfe000000
+# CONFIG_LOWMEM_SIZE_BOOL is not set
+CONFIG_LOWMEM_SIZE=0x30000000
+# CONFIG_KERNEL_START_BOOL is not set
+CONFIG_KERNEL_START=0xc0000000
+# CONFIG_TASK_SIZE_BOOL is not set
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_START_BOOL=y
+CONFIG_CONSISTENT_START=0xf0000000
+# CONFIG_CONSISTENT_SIZE_BOOL is not set
+CONFIG_CONSISTENT_SIZE=0x00200000
+# CONFIG_BOOT_LOAD_BOOL is not set
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_LBD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+# CONFIG_NETLINK_DEV is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+CONFIG_NET_TULIP=y
+# CONFIG_DE2104X is not set
+CONFIG_TULIP=y
+# CONFIG_TULIP_MWI is not set
+# CONFIG_TULIP_MMIO is not set
+# CONFIG_TULIP_NAPI is not set
+# CONFIG_DE4X5 is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+CONFIG_E100=y
+# CONFIG_E100_NAPI is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input I/O drivers
+#
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+# CONFIG_SERIO is not set
+# CONFIG_SERIO_I8042 is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB is not set
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_DEVFS_FS=y
+# CONFIG_DEVFS_MOUNT is not set
+# CONFIG_DEVFS_DEBUG is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_XATTR is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+# CONFIG_EXPORTFS is not set
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_DEBUG_KERNEL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set

arch/ppc/platforms/Makefile

@@ -28,6 +28,7 @@ obj-$(CONFIG_EV64260)		+= ev64260.o
 obj-$(CONFIG_GEMINI)		+= gemini_pci.o gemini_setup.o gemini_prom.o
 obj-$(CONFIG_K2)		+= k2.o
 obj-$(CONFIG_LOPEC)		+= lopec.o
+obj-$(CONFIG_KATANA)		+= katana.o
 obj-$(CONFIG_MCPN765)		+= mcpn765.o
 obj-$(CONFIG_MENF1)		+= menf1_setup.o menf1_pci.o
 obj-$(CONFIG_MVME5100)		+= mvme5100.o

arch/ppc/platforms/katana.c

+/*
+ * arch/ppc/platforms/katana.c
+ *
+ * Board setup routines for the Artesyn Katana 750 based boards.
+ *
+ * Tim Montgomery <timm@artesyncp.com>
+ *
+ * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il
+ * Based on code done by - Mark A. Greer <mgreer@mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+/*
+ * Supports the Artesyn 750i, 752i, and 3750.  The 752i is virtually identical
+ * to the 750i except that it has an mv64460 bridge.
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/console.h>
+#include <linux/initrd.h>
+#include <linux/root_dev.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/smp.h>
+#include <linux/mv643xx.h>
+#ifdef CONFIG_BOOTIMG
+#include <linux/bootimg.h>
+#endif
+#include <asm/page.h>
+#include <asm/time.h>
+#include <asm/smp.h>
+#include <asm/todc.h>
+#include <asm/bootinfo.h>
+#include <asm/mv64x60.h>
+#include <platforms/katana.h>
+
+static struct		mv64x60_handle bh;
+static katana_id_t	katana_id;
+static u32		cpld_base;
+static u32		sram_base;
+
+/* PCI Interrupt routing */
+static int __init
+katana_irq_lookup_750i(unsigned char idsel, unsigned char pin)
+{
+	static char pci_irq_table[][4] = {
+		/*
+		 * PCI IDSEL/INTPIN->INTLINE
+		 *       A   B   C   D
+		 */
+		/* IDSEL 4  (PMC 1) */
+		{ KATANA_PCI_INTB_IRQ_750i, KATANA_PCI_INTC_IRQ_750i,
+			KATANA_PCI_INTD_IRQ_750i, KATANA_PCI_INTA_IRQ_750i },
+		/* IDSEL 5  (PMC 2) */
+		{ KATANA_PCI_INTC_IRQ_750i, KATANA_PCI_INTD_IRQ_750i,
+			KATANA_PCI_INTA_IRQ_750i, KATANA_PCI_INTB_IRQ_750i },
+		/* IDSEL 6 (T8110) */
+		{KATANA_PCI_INTD_IRQ_750i, 0, 0, 0 },
+	};
+	const long min_idsel = 4, max_idsel = 6, irqs_per_slot = 4;
+
+	return PCI_IRQ_TABLE_LOOKUP;
+}
+
+static int __init
+katana_irq_lookup_3750(unsigned char idsel, unsigned char pin)
+{
+	static char pci_irq_table[][4] = {
+		/*
+		 * PCI IDSEL/INTPIN->INTLINE
+		 *       A   B   C   D
+		 */
+		{ KATANA_PCI_INTA_IRQ_3750, 0, 0, 0 }, /* IDSEL 3 (BCM5691) */
+		{ KATANA_PCI_INTB_IRQ_3750, 0, 0, 0 }, /* IDSEL 4 (MV64360 #2)*/
+		{ KATANA_PCI_INTC_IRQ_3750, 0, 0, 0 }, /* IDSEL 5 (MV64360 #3)*/
+	};
+	const long min_idsel = 3, max_idsel = 5, irqs_per_slot = 4;
+
+	return PCI_IRQ_TABLE_LOOKUP;
+}
+
+static int __init
+katana_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+	switch (katana_id) {
+	case KATANA_ID_750I:
+	case KATANA_ID_752I:
+		return katana_irq_lookup_750i(idsel, pin);
+
+	case KATANA_ID_3750:
+		return katana_irq_lookup_3750(idsel, pin);
+
+	default:
+		printk(KERN_ERR "Bogus board ID\n");
+		return 0;
+	}
+}
+
+/* Board info retrieval routines */
+void __init
+katana_get_board_id(void)
+{
+	switch (in_8((volatile char *)(cpld_base + KATANA_CPLD_PRODUCT_ID))) {
+	case KATANA_PRODUCT_ID_3750:
+		katana_id = KATANA_ID_3750;
+		break;
+
+	case KATANA_PRODUCT_ID_750i:
+		katana_id = KATANA_ID_750I;
+		break;
+
+	case KATANA_PRODUCT_ID_752i:
+		katana_id = KATANA_ID_752I;
+		break;
+
+	default:
+		printk(KERN_ERR "Unsupported board\n");
+	}
+}
+
+int __init
+katana_get_proc_num(void)
+{
+	u16		val;
+	u8		save_exclude;
+	static int	proc = -1;
+	static u8	first_time = 1;
+
+	if (first_time) {
+		if (katana_id != KATANA_ID_3750)
+			proc = 0;
+		else {
+			save_exclude = mv64x60_pci_exclude_bridge;
+			mv64x60_pci_exclude_bridge = 0;
+
+			early_read_config_word(bh.hose_a, 0,
+				PCI_DEVFN(0,0), PCI_DEVICE_ID, &val);
+
+			mv64x60_pci_exclude_bridge = save_exclude;
+
+			switch(val) {
+			case PCI_DEVICE_ID_KATANA_3750_PROC0:
+				proc = 0;
+				break;
+
+			case PCI_DEVICE_ID_KATANA_3750_PROC1:
+				proc = 1;
+				break;
+
+			case PCI_DEVICE_ID_KATANA_3750_PROC2:
+				proc = 2;
+				break;
+
+			default:
+				printk(KERN_ERR "Bogus Device ID\n");
+			}
+		}
+
+		first_time = 0;
+	}
+
+	return proc;
+}
+
+static inline int
+katana_is_monarch(void)
+{
+	return in_8((volatile char *)(cpld_base + KATANA_CPLD_BD_CFG_3)) &
+		KATANA_CPLD_BD_CFG_3_MONARCH;
+}
+
+static void __init
+katana_enable_ipmi(void)
+{
+	u8 reset_out;
+
+	/* Enable access to IPMI ctlr by clearing IPMI PORTSEL bit in CPLD */
+	reset_out = in_8((volatile char *)(cpld_base + KATANA_CPLD_RESET_OUT));
+	reset_out &= ~KATANA_CPLD_RESET_OUT_PORTSEL;
+	out_8((volatile void *)(cpld_base + KATANA_CPLD_RESET_OUT), reset_out);
+	return;
+}
+
+static unsigned long
+katana_bus_freq(void)
+{
+	u8 bd_cfg_0;
+
+	bd_cfg_0 = in_8((volatile char *)(cpld_base + KATANA_CPLD_BD_CFG_0));
+
+	switch (bd_cfg_0 & KATANA_CPLD_BD_CFG_0_SYSCLK_MASK) {
+	case KATANA_CPLD_BD_CFG_0_SYSCLK_133:
+		return 133333333;
+		break;
+
+	case KATANA_CPLD_BD_CFG_0_SYSCLK_100:
+		return 100000000;
+		break;
+
+	default:
+		return 133333333;
+		break;
+	}
+}
+
+/* Bridge & platform setup routines */
+void __init
+katana_intr_setup(void)
+{
+	/* MPP 8, 9, and 10 */
+	mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_1, 0xfff);
+
+	/* MPP 14 */
+	if ((katana_id == KATANA_ID_750I) || (katana_id == KATANA_ID_752I))
+		mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_1, 0x0f000000);
+
+	/*
+	 * Define GPP 8,9,and 10 interrupt polarity as active low
+	 * input signal and level triggered
+	 */
+	mv64x60_set_bits(&bh, MV64x60_GPP_LEVEL_CNTL, 0x700);
+	mv64x60_clr_bits(&bh, MV64x60_GPP_IO_CNTL, 0x700);
+
+	if ((katana_id == KATANA_ID_750I) || (katana_id == KATANA_ID_752I)) {
+		mv64x60_set_bits(&bh, MV64x60_GPP_LEVEL_CNTL, (1<<14));
+		mv64x60_clr_bits(&bh, MV64x60_GPP_IO_CNTL, (1<<14));
+	}
+
+	/* Config GPP intr ctlr to respond to level trigger */
+	mv64x60_set_bits(&bh, MV64x60_COMM_ARBITER_CNTL, (1<<10));
+
+	/* XXXX Erranum FEr PCI-#8 */
+	mv64x60_clr_bits(&bh, MV64x60_PCI0_CMD, (1<<5) | (1<<9));
+	mv64x60_clr_bits(&bh, MV64x60_PCI1_CMD, (1<<5) | (1<<9));
+
+	/*
+	 * Dismiss and then enable interrupt on GPP interrupt cause
+	 * for CPU #0
+	 */
+	mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~0x700);
+	mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK, 0x700);
+
+	if ((katana_id == KATANA_ID_750I) || (katana_id == KATANA_ID_752I)) {
+		mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~(1<<14));
+		mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK, (1<<14));
+	}
+
+	/*
+	 * Dismiss and then enable interrupt on CPU #0 high cause reg
+	 * BIT25 summarizes GPP interrupts 8-15
+	 */
+	mv64x60_set_bits(&bh, MV64360_IC_CPU0_INTR_MASK_HI, (1<<25));
+	return;
+}
+
+void __init
+katana_setup_peripherals(void)
+{
+	u32 base, size_0, size_1;
+
+	/* Set up windows for boot CS, soldered & socketed flash, and CPLD */
+	mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
+		 KATANA_BOOT_WINDOW_BASE, KATANA_BOOT_WINDOW_SIZE, 0);
+	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
+
+	/* Assume firmware set up window sizes correctly for dev 0 & 1 */
+	mv64x60_get_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN, &base, &size_0);
+
+	if (size_0 > 0) {
+		mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN,
+			 KATANA_SOLDERED_FLASH_BASE, size_0, 0);
+		bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_0_WIN);
+	}
+
+	mv64x60_get_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN, &base, &size_1);
+
+	if (size_1 > 0) {
+		mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN,
+			 (KATANA_SOLDERED_FLASH_BASE + size_0), size_1, 0);
+		bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
+	}
+
+	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_2_WIN,
+		 KATANA_SOCKET_BASE, KATANA_SOCKETED_FLASH_SIZE, 0);
+	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_2_WIN);
+
+	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_3_WIN,
+		 KATANA_CPLD_BASE, KATANA_CPLD_SIZE, 0);
+	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_3_WIN);
+	cpld_base = (u32)ioremap(KATANA_CPLD_BASE, KATANA_CPLD_SIZE);
+
+	mv64x60_set_32bit_window(&bh, MV64x60_CPU2SRAM_WIN,
+		 KATANA_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0);
+	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN);
+	sram_base = (u32)ioremap(KATANA_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE);
+
+	/* Set up Enet->SRAM window */
+	mv64x60_set_32bit_window(&bh, MV64x60_ENET2MEM_4_WIN,
+		KATANA_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0x2);
+	bh.ci->enable_window_32bit(&bh, MV64x60_ENET2MEM_4_WIN);
+
+	/* Give enet r/w access to memory region */
+	mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_0, (0x3 << (4 << 1)));
+	mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_1, (0x3 << (4 << 1)));
+	mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_2, (0x3 << (4 << 1)));
+
+	mv64x60_clr_bits(&bh, MV64x60_PCI1_PCI_DECODE_CNTL, (1 << 3));
+	mv64x60_clr_bits(&bh, MV64x60_TIMR_CNTR_0_3_CNTL,
+			 ((1 << 0) | (1 << 8) | (1 << 16) | (1 << 24)));
+
+	/* Must wait until window set up before retrieving board id */
+	katana_get_board_id();
+
+	/* Enumerate pci bus (must know board id before getting proc number) */
+	if (katana_get_proc_num() == 0)
+		bh.hose_b->last_busno = pciauto_bus_scan(bh.hose_b, 0);
+
+#if defined(CONFIG_NOT_COHERENT_CACHE)
+	mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x00160000);
+#else
+	mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x001600b2);
+#endif
+
+	/*
+	 * Setting the SRAM to 0. Note that this generates parity errors on
+	 * internal data path in SRAM since it's first time accessing it
+	 * while after reset it's not configured.
+	 */
+	memset((void *)sram_base, 0, MV64360_SRAM_SIZE);
+
+	/* Only processor zero [on 3750] is an PCI interrupt controller */
+	if (katana_get_proc_num() == 0)
+		katana_intr_setup();
+
+	return;
+}
+
+static void __init
+katana_setup_bridge(void)
+{
+	struct mv64x60_setup_info si;
+	int i;
+
+	memset(&si, 0, sizeof(si));
+
+	si.phys_reg_base = KATANA_BRIDGE_REG_BASE;
+
+	si.pci_1.enable_bus = 1;
+	si.pci_1.pci_io.cpu_base = KATANA_PCI1_IO_START_PROC_ADDR;
+	si.pci_1.pci_io.pci_base_hi = 0;
+	si.pci_1.pci_io.pci_base_lo = KATANA_PCI1_IO_START_PCI_ADDR;
+	si.pci_1.pci_io.size = KATANA_PCI1_IO_SIZE;
+	si.pci_1.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
+	si.pci_1.pci_mem[0].cpu_base = KATANA_PCI1_MEM_START_PROC_ADDR;
+	si.pci_1.pci_mem[0].pci_base_hi = KATANA_PCI1_MEM_START_PCI_HI_ADDR;
+	si.pci_1.pci_mem[0].pci_base_lo = KATANA_PCI1_MEM_START_PCI_LO_ADDR;
+	si.pci_1.pci_mem[0].size = KATANA_PCI1_MEM_SIZE;
+	si.pci_1.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
+	si.pci_1.pci_cmd_bits = 0;
+	si.pci_1.latency_timer = 0x80;
+
+	for (i = 0; i < MV64x60_CPU2MEM_WINDOWS; i++) {
+#if defined(CONFIG_NOT_COHERENT_CACHE)
+		si.cpu_prot_options[i] = 0;
+		si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE;
+		si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE;
+		si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE;
+
+		si.pci_1.acc_cntl_options[i] =
+		    MV64360_PCI_ACC_CNTL_SNOOP_NONE |
+		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
+		    MV64360_PCI_ACC_CNTL_MBURST_128_BYTES |
+		    MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES;
+#else
+		si.cpu_prot_options[i] = 0;
+		si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE; /* errata */
+		si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE; /* errata */
+		si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE; /* errata */
+
+		si.pci_1.acc_cntl_options[i] =
+		    MV64360_PCI_ACC_CNTL_SNOOP_WB |
+		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
+		    MV64360_PCI_ACC_CNTL_MBURST_32_BYTES |
+		    MV64360_PCI_ACC_CNTL_RDSIZE_32_BYTES;
+#endif
+	}
+
+	/* Lookup PCI host bridges */
+	if (mv64x60_init(&bh, &si))
+		printk("Bridge initialization failed.\n");
+
+	pci_dram_offset = 0; /* sys mem at same addr on PCI & cpu bus */
+	ppc_md.pci_swizzle = common_swizzle;
+	ppc_md.pci_map_irq = katana_map_irq;
+	ppc_md.pci_exclude_device = mv64x60_pci_exclude_device;
+
+	mv64x60_set_bus(&bh, 1, 0);
+	bh.hose_b->first_busno = 0;
+	bh.hose_b->last_busno = 0xff;
+
+	return;
+}
+
+static void __init
+katana_setup_arch(void)
+{
+	if (ppc_md.progress)
+		ppc_md.progress("katana_setup_arch: enter", 0);
+
+	set_tb(0, 0);
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	if (initrd_start)
+		ROOT_DEV = Root_RAM0;
+	else
+#endif
+#ifdef   CONFIG_ROOT_NFS
+		ROOT_DEV = Root_NFS;
+#else
+		ROOT_DEV = Root_SDA2;
+#endif
+
+	/*
+	 * Set up the L2CR register.
+	 *
+	 * 750FX has only L2E, L2PE (bits 2-8 are reserved)
+	 * DD2.0 has bug that requires the L2 to be in WRT mode
+	 * avoid dirty data in cache
+	 */
+	if (PVR_REV(mfspr(PVR)) == 0x0200) {
+		printk("DD2.0 detected. Setting L2 cache"
+			"to Writethrough mode\n");
+		_set_L2CR(L2CR_L2E | L2CR_L2PE | L2CR_L2WT);
+	}
+	else
+		_set_L2CR(L2CR_L2E | L2CR_L2PE);
+
+	if (ppc_md.progress)
+		ppc_md.progress("katana_setup_arch: calling setup_bridge", 0);
+
+	katana_setup_bridge();
+	katana_setup_peripherals();
+	katana_enable_ipmi();
+
+	printk("Artesyn Communication Products, LLC - Katana(TM)\n");
+	if (ppc_md.progress)
+		ppc_md.progress("katana_setup_arch: exit", 0);
+	return;
+}
+
+/* Platform device data fixup routine. */
+static int __init
+katana_fixup_pd(void)
+{
+	struct list_head	*entry;
+	struct platform_device	*pd;
+	struct device		*dev;
+#if defined(CONFIG_SERIAL_MPSC)
+	struct mpsc_pd_dd	*dd;
+#endif
+#if defined(CONFIG_MV643XX_ETH)
+	struct mv64xxx_eth_pd_dd *eth_dd;
+	static u16 phy_addr[] = {
+		KATANA_ETH0_PHY_ADDR,
+		KATANA_ETH1_PHY_ADDR,
+		KATANA_ETH2_PHY_ADDR,
+	};
+	struct resource	*rx_r;
+	struct resource	*tx_r;
+	int		rx_size = KATANA_ETH_RX_QUEUE_SIZE * ETH_DESC_SIZE;
+	int		tx_size = KATANA_ETH_TX_QUEUE_SIZE * ETH_DESC_SIZE;
+#endif
+
+	list_for_each(entry, &platform_bus_type.devices.list) {
+		dev = container_of(entry, struct device, bus_list);
+		pd = container_of(dev, struct platform_device, dev);
+
+#if defined(CONFIG_SERIAL_MPSC)
+		if (!strncmp(pd->name, MPSC_CTLR_NAME, BUS_ID_SIZE)) {
+			dd = (struct mpsc_pd_dd *)dev_get_drvdata(&pd->dev);
+
+			dd->max_idle = 40;	/* XXXX what should be? */
+			dd->default_baud = KATANA_DEFAULT_BAUD;
+			dd->brg_clk_src = KATANA_MPSC_CLK_SRC;
+			dd->brg_clk_freq = KATANA_MPSC_CLK_FREQ;
+		}
+#endif
+#if defined(CONFIG_MV643XX_ETH)
+		if (!strncmp(pd->name, MV64XXX_ETH_NAME, BUS_ID_SIZE)) {
+			eth_dd = (struct mv64xxx_eth_pd_dd *)
+						dev_get_drvdata(&pd->dev);
+			eth_dd->phy_addr = phy_addr[pd->id];
+			eth_dd->port_config = KATANA_ETH_PORT_CONFIG_VALUE;
+			eth_dd->port_config_extend =
+					KATANA_ETH_PORT_CONFIG_EXTEND_VALUE;
+			eth_dd->port_sdma_config =
+					KATANA_ETH_PORT_SDMA_CONFIG_VALUE;
+			eth_dd->port_serial_control =
+					KATANA_ETH_PORT_SERIAL_CONTROL_VALUE;
+			eth_dd->tx_queue_size = KATANA_ETH_TX_QUEUE_SIZE;
+			eth_dd->rx_queue_size = KATANA_ETH_RX_QUEUE_SIZE;
+
+			rx_r = &pd->resource[5];
+			rx_r->start = KATANA_INTERNAL_SRAM_BASE +
+						(rx_size + tx_size) * pd->id;
+			rx_r->end = rx_r->start + rx_size - 1;
+			rx_r->flags = IORESOURCE_MEM;
+
+			tx_r = &pd->resource[6];
+			tx_r->start = rx_r->start + rx_size;
+			tx_r->end = tx_r->start + tx_size - 1;
+			tx_r->flags = IORESOURCE_MEM;
+		}
+#endif
+	}
+
+	return 0;
+}
+
+subsys_initcall(katana_fixup_pd);
+
+static void
+katana_restart(char *cmd)
+{
+	volatile ulong i = 10000000;
+
+	/* issue hard reset to the reset command register */
+	out_8((volatile char *)(cpld_base + KATANA_CPLD_RST_CMD),
+		KATANA_CPLD_RST_CMD_HR);
+
+	while (i-- > 0) ;
+	panic("restart failed\n");
+}
+
+static void
+katana_halt(void)
+{
+	while (1) ;
+	/* NOTREACHED */
+}
+
+static void
+katana_power_off(void)
+{
+	katana_halt();
+	/* NOTREACHED */
+}
+
+static int
+katana_show_cpuinfo(struct seq_file *m)
+{
+	seq_printf(m, "vendor\t\t: Artesyn Communication Products, LLC\n");
+
+	seq_printf(m, "board\t\t: ");
+
+	switch (katana_id) {
+	case KATANA_ID_3750:
+		seq_printf(m, "Katana 3750\n");
+		break;
+
+	case KATANA_ID_750I:
+		seq_printf(m, "Katana 750i\n");
+		break;
+
+	case KATANA_ID_752I:
+		seq_printf(m, "Katana 752i\n");
+		break;
+
+	default:
+		seq_printf(m, "Unknown\n");
+		break;
+	}
+
+	seq_printf(m, "product ID\t: 0x%x\n",
+		   in_8((volatile char *)(cpld_base + KATANA_CPLD_PRODUCT_ID)));
+	seq_printf(m, "hardware rev\t: 0x%x\n",
+		   in_8((volatile char *)(cpld_base+KATANA_CPLD_HARDWARE_VER)));
+	seq_printf(m, "PLD rev\t\t: 0x%x\n",
+		   in_8((volatile char *)(cpld_base + KATANA_CPLD_PLD_VER)));
+	seq_printf(m, "PLB freq\t: %ldMhz\n", katana_bus_freq() / 1000000);
+	seq_printf(m, "PCI\t\t: %sMonarch\n", katana_is_monarch()? "" : "Non-");
+
+	return 0;
+}
+
+static void __init
+katana_calibrate_decr(void)
+{
+	ulong freq;
+
+	freq = katana_bus_freq() / 4;
+
+	printk("time_init: decrementer frequency = %lu.%.6lu MHz\n",
+	       freq / 1000000, freq % 1000000);
+
+	tb_ticks_per_jiffy = freq / HZ;
+	tb_to_us = mulhwu_scale_factor(freq, 1000000);
+
+	return;
+}
+
+unsigned long __init
+katana_find_end_of_memory(void)
+{
+	return mv64x60_get_mem_size(KATANA_BRIDGE_REG_BASE,
+		MV64x60_TYPE_MV64360);
+}
+
+static inline void
+katana_set_bat(void)
+{
+	mb();
+	mtspr(DBAT2U, 0xf0001ffe);
+	mtspr(DBAT2L, 0xf000002a);
+	mb();
+
+	return;
+}
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE)
+static void __init
+katana_map_io(void)
+{
+	io_block_mapping(0xf8100000, 0xf8100000, 0x00020000, _PAGE_IO);
+}
+#endif
+
+void __init
+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+	      unsigned long r6, unsigned long r7)
+{
+	parse_bootinfo(find_bootinfo());
+
+	isa_mem_base = 0;
+
+	ppc_md.setup_arch = katana_setup_arch;
+	ppc_md.show_cpuinfo = katana_show_cpuinfo;
+	ppc_md.init_IRQ = mv64360_init_irq;
+	ppc_md.get_irq = mv64360_get_irq;
+	ppc_md.restart = katana_restart;
+	ppc_md.power_off = katana_power_off;
+	ppc_md.halt = katana_halt;
+	ppc_md.find_end_of_memory = katana_find_end_of_memory;
+	ppc_md.calibrate_decr = katana_calibrate_decr;
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE)
+	ppc_md.setup_io_mappings = katana_map_io;
+	ppc_md.progress = mv64x60_mpsc_progress;
+	mv64x60_progress_init(KATANA_BRIDGE_REG_BASE);
+#endif
+
+	katana_set_bat(); /* Need for katana_find_end_of_memory and progress */
+
+	return;
+}

arch/ppc/platforms/katana.h

+/*
+ * arch/ppc/platforms/katana.h
+ *
+ * Definitions for Artesyn Katana750i/3750 board.
+ *
+ * Tim Montgomery <timm@artesyncp.com>
+ *
+ * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il
+ * Based on code done by Mark A. Greer <mgreer@mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/*
+ * The MV64360 has 2 PCI buses each with 1 window from the CPU bus to
+ * PCI I/O space and 4 windows from the CPU bus to PCI MEM space.
+ * We'll only use one PCI MEM window on each PCI bus.
+ *
+ * This is the CPU physical memory map (windows must be at least 1MB and start
+ * on a boundary that is a multiple of the window size):
+ *
+ *    0xff800000-0xffffffff      - Boot window
+ *    0xf8400000-0xf85fffff      - Internal SRAM
+ *    0xf8200000-0xf823ffff      - CPLD
+ *    0xf8100000-0xf810ffff      - MV64360 Registers
+ *    0xf8000000-0xf80fffff      - PLCC socket
+ *    0xf0000000-0xf01fffff	 - Consistent memory pool
+ *    0xe8000000-0xefffffff      - soldered flash
+ *    0xc0000000-0xc0ffffff      - PCI I/O
+ *    0x80000000-0xbfffffff      - PCI MEM
+ */
+
+#ifndef __PPC_PLATFORMS_KATANA_H
+#define __PPC_PLATFORMS_KATANA_H
+
+/* CPU Physical Memory Map setup. */
+#define KATANA_BOOT_WINDOW_BASE			0xff800000
+#define KATANA_INTERNAL_SRAM_BASE		0xf8400000
+#define KATANA_CPLD_BASE			0xf8200000
+#define KATANA_BRIDGE_REG_BASE			0xf8100000
+#define KATANA_SOCKET_BASE			0xf8000000
+#define KATANA_SOLDERED_FLASH_BASE		0xe8000000
+
+#define KATANA_BOOT_WINDOW_SIZE_ACTUAL		0x00800000 /* 8MB */
+#define KATANA_CPLD_SIZE_ACTUAL			0x00020000 /* 128KB */
+#define KATANA_SOCKETED_FLASH_SIZE_ACTUAL	0x00080000 /* 512KB */
+#define KATANA_SOLDERED_FLASH_SIZE_ACTUAL	0x02000000 /* 32MB */
+
+#define KATANA_BOOT_WINDOW_SIZE		max(MV64360_WINDOW_SIZE_MIN,	\
+		KATANA_BOOT_WINDOW_SIZE_ACTUAL)
+#define KATANA_CPLD_SIZE		max(MV64360_WINDOW_SIZE_MIN,	\
+		KATANA_CPLD_SIZE_ACTUAL)
+#define KATANA_SOCKETED_FLASH_SIZE	max(MV64360_WINDOW_SIZE_MIN,	\
+		KATANA_SOCKETED_FLASH_SIZE_ACTUAL)
+#define KATANA_SOLDERED_FLASH_SIZE	max(MV64360_WINDOW_SIZE_MIN,	\
+		KATANA_SOLDERED_FLASH_SIZE_ACTUAL)
+
+#define KATANA_PCI1_MEM_START_PROC_ADDR         0x80000000
+#define KATANA_PCI1_MEM_START_PCI_HI_ADDR       0x00000000
+#define KATANA_PCI1_MEM_START_PCI_LO_ADDR       0x80000000
+#define KATANA_PCI1_MEM_SIZE                    0x40000000
+#define KATANA_PCI1_IO_START_PROC_ADDR          0xc0000000
+#define KATANA_PCI1_IO_START_PCI_ADDR           0x00000000
+#define KATANA_PCI1_IO_SIZE                     0x01000000
+
+/* Board-specific IRQ info */
+#define  KATANA_PCI_INTA_IRQ_3750		64+8
+#define  KATANA_PCI_INTB_IRQ_3750		64+9
+#define  KATANA_PCI_INTC_IRQ_3750		64+10
+
+#define  KATANA_PCI_INTA_IRQ_750i		64+8
+#define  KATANA_PCI_INTB_IRQ_750i		64+9
+#define  KATANA_PCI_INTC_IRQ_750i		64+10
+#define  KATANA_PCI_INTD_IRQ_750i		64+14
+
+#define KATANA_CPLD_RST_EVENT			0x00000000
+#define KATANA_CPLD_RST_CMD			0x00001000
+#define KATANA_CPLD_PCI_ERR_INT_EN		0x00002000
+#define KATANA_CPLD_PCI_ERR_INT_PEND		0x00003000
+#define KATANA_CPLD_PRODUCT_ID			0x00004000
+#define KATANA_CPLD_EREADY			0x00005000
+
+#define KATANA_CPLD_HARDWARE_VER		0x00007000
+#define KATANA_CPLD_PLD_VER			0x00008000
+#define KATANA_CPLD_BD_CFG_0			0x00009000
+#define KATANA_CPLD_BD_CFG_1			0x0000a000
+#define KATANA_CPLD_BD_CFG_3			0x0000c000
+#define KATANA_CPLD_LED				0x0000d000
+#define KATANA_CPLD_RESET_OUT			0x0000e000
+
+#define KATANA_CPLD_RST_EVENT_INITACT		0x80
+#define KATANA_CPLD_RST_EVENT_SW		0x40
+#define KATANA_CPLD_RST_EVENT_WD		0x20
+#define KATANA_CPLD_RST_EVENT_COPS		0x10
+#define KATANA_CPLD_RST_EVENT_COPH		0x08
+#define KATANA_CPLD_RST_EVENT_CPCI		0x02
+#define KATANA_CPLD_RST_EVENT_FP		0x01
+
+#define KATANA_CPLD_RST_CMD_SCL			0x80
+#define KATANA_CPLD_RST_CMD_SDA			0x40
+#define KATANA_CPLD_RST_CMD_I2C			0x10
+#define KATANA_CPLD_RST_CMD_FR			0x08
+#define KATANA_CPLD_RST_CMD_SR			0x04
+#define KATANA_CPLD_RST_CMD_HR			0x01
+
+#define KATANA_CPLD_BD_CFG_0_SYSCLK_MASK	0xc0
+#define KATANA_CPLD_BD_CFG_0_SYSCLK_133		0xc0
+#define KATANA_CPLD_BD_CFG_0_SYSCLK_100		0x40
+
+#define KATANA_CPLD_BD_CFG_1_FL_BANK_MASK	0x03
+#define KATANA_CPLD_BD_CFG_1_FL_BANK_16MB	0x00
+#define KATANA_CPLD_BD_CFG_1_FL_BANK_32MB	0x01
+#define KATANA_CPLD_BD_CFG_1_FL_BANK_64MB	0x02
+#define KATANA_CPLD_BD_CFG_1_FL_BANK_128MB	0x03
+
+#define KATANA_CPLD_BD_CFG_1_FL_NUM_BANKS_MASK	0x04
+#define KATANA_CPLD_BD_CFG_1_FL_NUM_BANKS_ONE	0x00
+#define KATANA_CPLD_BD_CFG_1_FL_NUM_BANKS_TWO	0x04
+
+#define KATANA_CPLD_BD_CFG_3_MONARCH		0x04
+
+#define KATANA_CPLD_RESET_OUT_PORTSEL		0x80
+#define KATANA_CPLD_RESET_OUT_WD		0x20
+#define KATANA_CPLD_RESET_OUT_COPH		0x08
+#define KATANA_CPLD_RESET_OUT_PCI_RST_PCI	0x02
+#define KATANA_CPLD_RESET_OUT_PCI_RST_FP	0x01
+
+#define KATANA_MBOX_RESET_REQUEST		0xC83A
+#define KATANA_MBOX_RESET_ACK			0xE430
+#define KATANA_MBOX_RESET_DONE			0x32E5
+
+#define HSL_PLD_BASE				0x00010000
+#define HSL_PLD_J4SGA_REG_OFF			0
+#define HSL_PLD_J4GA_REG_OFF			1
+#define HSL_PLD_J2GA_REG_OFF			2
+#define GA_MASK					0x1f
+#define HSL_PLD_SIZE				0x1000
+#define K3750_GPP_GEO_ADDR_PINS			0xf8000000
+#define K3750_GPP_GEO_ADDR_SHIFT		27
+
+#define K3750_GPP_EVENT_PROC_0			(1 << 21)
+#define K3750_GPP_EVENT_PROC_1_2		(1 << 2)
+
+#define PCI_VENDOR_ID_ARTESYN			0x1223
+#define PCI_DEVICE_ID_KATANA_3750_PROC0		0x0041
+#define PCI_DEVICE_ID_KATANA_3750_PROC1		0x0042
+#define PCI_DEVICE_ID_KATANA_3750_PROC2		0x0043
+
+#define COPROC_MEM_FUNCTION			0
+#define COPROC_MEM_BAR				0
+#define COPROC_REGS_FUNCTION			0
+#define COPROC_REGS_BAR				4
+#define COPROC_FLASH_FUNCTION			2
+#define COPROC_FLASH_BAR			4
+
+#define KATANA_IPMB_LOCAL_I2C_ADDR		0x08
+
+#define	KATANA_DEFAULT_BAUD			9600
+#define	KATANA_MPSC_CLK_SRC			8	  /* TCLK */
+#define	KATANA_MPSC_CLK_FREQ			133333333 /* 133.3333... MHz */
+
+#define	KATANA_ETH0_PHY_ADDR			12
+#define	KATANA_ETH1_PHY_ADDR			11
+#define	KATANA_ETH2_PHY_ADDR			4
+
+#define KATANA_PRODUCT_ID_3750			0x01
+#define KATANA_PRODUCT_ID_750i			0x02
+#define KATANA_PRODUCT_ID_752i			0x04
+
+#define KATANA_ETH_TX_QUEUE_SIZE		1050
+#define KATANA_ETH_RX_QUEUE_SIZE		450
+
+#define	KATANA_ETH_PORT_CONFIG_VALUE			\
+	ETH_UNICAST_NORMAL_MODE			|	\
+	ETH_DEFAULT_RX_QUEUE_0			|	\
+	ETH_DEFAULT_RX_ARP_QUEUE_0		|	\
+	ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP		|	\
+	ETH_RECEIVE_BC_IF_IP			|	\
+	ETH_RECEIVE_BC_IF_ARP			|	\
+	ETH_CAPTURE_TCP_FRAMES_DIS		|	\
+	ETH_CAPTURE_UDP_FRAMES_DIS		|	\
+	ETH_DEFAULT_RX_TCP_QUEUE_0		|	\
+	ETH_DEFAULT_RX_UDP_QUEUE_0		|	\
+	ETH_DEFAULT_RX_BPDU_QUEUE_0
+
+#define	KATANA_ETH_PORT_CONFIG_EXTEND_VALUE		\
+	ETH_SPAN_BPDU_PACKETS_AS_NORMAL		|	\
+	ETH_PARTITION_DISABLE
+
+#define	GT_ETH_IPG_INT_RX(value)			\
+	((value & 0x3fff) << 8)
+
+#define	KATANA_ETH_PORT_SDMA_CONFIG_VALUE		\
+	ETH_RX_BURST_SIZE_4_64BIT		|	\
+	GT_ETH_IPG_INT_RX(0)			|	\
+	ETH_TX_BURST_SIZE_4_64BIT
+
+#define	KATANA_ETH_PORT_SERIAL_CONTROL_VALUE		\
+	ETH_FORCE_LINK_PASS			|	\
+	ETH_ENABLE_AUTO_NEG_FOR_DUPLX		|	\
+	ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL	|	\
+	ETH_ADV_SYMMETRIC_FLOW_CTRL		|	\
+	ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX	|	\
+	ETH_FORCE_BP_MODE_NO_JAM		|	\
+	BIT9					|	\
+	ETH_DO_NOT_FORCE_LINK_FAIL		|	\
+	ETH_RETRANSMIT_16_ATTEMPTS		|	\
+	ETH_ENABLE_AUTO_NEG_SPEED_GMII		|	\
+	ETH_DTE_ADV_0				|	\
+	ETH_DISABLE_AUTO_NEG_BYPASS		|	\
+	ETH_AUTO_NEG_NO_CHANGE			|	\
+	ETH_MAX_RX_PACKET_9700BYTE		|	\
+	ETH_CLR_EXT_LOOPBACK			|	\
+	ETH_SET_FULL_DUPLEX_MODE		|	\
+	ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX
+
+#ifndef __ASSEMBLY__
+
+typedef enum {
+	KATANA_ID_3750,
+	KATANA_ID_750I,
+	KATANA_ID_752I,
+	KATANA_ID_MAX
+} katana_id_t;
+
+#endif
+
+#endif				/* __PPC_PLATFORMS_KATANA_H */

arch/ppc/syslib/Makefile

@@ -47,6 +47,7 @@ obj-$(CONFIG_GT64260)		+= gt64260_pic.o
 obj-$(CONFIG_K2)		+= i8259.o indirect_pci.o todc_time.o \
 					pci_auto.o
 obj-$(CONFIG_LOPEC)		+= i8259.o pci_auto.o todc_time.o
+obj-$(CONFIG_KATANA)		+= pci_auto.o
 obj-$(CONFIG_MCPN765)		+= todc_time.o indirect_pci.o pci_auto.o \
 					open_pic.o i8259.o hawk_common.o
 obj-$(CONFIG_MENF1)		+= todc_time.o i8259.o mpc10x_common.o \