mtd: rawnand: omap2: convert driver to nand_scan()

Two helpers have been added to the core to do all kind of controller
side configuration/initialization between the detection phase and the
final NAND scan. Implement these hooks so that we can convert the driver
to just use nand_scan() instead of the nand_scan_ident() +
nand_scan_tail() pair.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

drivers/mtd/nand/raw/omap2.c

@@ -144,12 +144,6 @@ static u_char bch8_vector[] = {0xf3, 0xdb, 0x14, 0x16, 0x8b, 0xd2, 0xbe, 0xcc,
 	0xac, 0x6b, 0xff, 0x99, 0x7b};
 static u_char bch4_vector[] = {0x00, 0x6b, 0x31, 0xdd, 0x41, 0xbc, 0x10};
 
-/* Shared among all NAND instances to synchronize access to the ECC Engine */
-static struct nand_controller omap_gpmc_controller = {
-	.lock = __SPIN_LOCK_UNLOCKED(omap_gpmc_controller.lock),
-	.wq = __WAIT_QUEUE_HEAD_INITIALIZER(omap_gpmc_controller.wq),
-};
-
 struct omap_nand_info {
 	struct nand_chip		nand;
 	struct platform_device		*pdev;
@@ -1915,106 +1909,26 @@ static const struct mtd_ooblayout_ops omap_sw_ooblayout_ops = {
 	.free = omap_sw_ooblayout_free,
 };
 
-static int omap_nand_probe(struct platform_device *pdev)
+static int omap_nand_attach_chip(struct nand_chip *chip)
 {
-	struct omap_nand_info		*info;
-	struct mtd_info			*mtd;
-	struct nand_chip		*nand_chip;
-	int				err;
-	dma_cap_mask_t			mask;
-	struct resource			*res;
-	struct device			*dev = &pdev->dev;
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct omap_nand_info *info = mtd_to_omap(mtd);
+	struct device *dev = &info->pdev->dev;
 	int min_oobbytes = BADBLOCK_MARKER_LENGTH;
 	int oobbytes_per_step;
+	dma_cap_mask_t mask;
+	int err;
 
-	info = devm_kzalloc(&pdev->dev, sizeof(struct omap_nand_info),
-				GFP_KERNEL);
-	if (!info)
-		return -ENOMEM;
-
-	info->pdev = pdev;
-
-	err = omap_get_dt_info(dev, info);
-	if (err)
-		return err;
-
-	info->ops = gpmc_omap_get_nand_ops(&info->reg, info->gpmc_cs);
-	if (!info->ops) {
-		dev_err(&pdev->dev, "Failed to get GPMC->NAND interface\n");
-		return -ENODEV;
-	}
-
-	nand_chip		= &info->nand;
-	mtd			= nand_to_mtd(nand_chip);
-	mtd->dev.parent		= &pdev->dev;
-	nand_chip->ecc.priv	= NULL;
-	nand_set_flash_node(nand_chip, dev->of_node);
-
-	if (!mtd->name) {
-		mtd->name = devm_kasprintf(&pdev->dev, GFP_KERNEL,
-					   "omap2-nand.%d", info->gpmc_cs);
-		if (!mtd->name) {
-			dev_err(&pdev->dev, "Failed to set MTD name\n");
-			return -ENOMEM;
-		}
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	nand_chip->IO_ADDR_R = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(nand_chip->IO_ADDR_R))
-		return PTR_ERR(nand_chip->IO_ADDR_R);
-
-	info->phys_base = res->start;
-
-	nand_chip->controller = &omap_gpmc_controller;
-
-	nand_chip->IO_ADDR_W = nand_chip->IO_ADDR_R;
-	nand_chip->cmd_ctrl  = omap_hwcontrol;
-
-	info->ready_gpiod = devm_gpiod_get_optional(&pdev->dev, "rb",
-						    GPIOD_IN);
-	if (IS_ERR(info->ready_gpiod)) {
-		dev_err(dev, "failed to get ready gpio\n");
-		return PTR_ERR(info->ready_gpiod);
-	}
-
-	/*
-	 * If RDY/BSY line is connected to OMAP then use the omap ready
-	 * function and the generic nand_wait function which reads the status
-	 * register after monitoring the RDY/BSY line. Otherwise use a standard
-	 * chip delay which is slightly more than tR (AC Timing) of the NAND
-	 * device and read status register until you get a failure or success
-	 */
-	if (info->ready_gpiod) {
-		nand_chip->dev_ready = omap_dev_ready;
-		nand_chip->chip_delay = 0;
-	} else {
-		nand_chip->waitfunc = omap_wait;
-		nand_chip->chip_delay = 50;
-	}
-
-	if (info->flash_bbt)
-		nand_chip->bbt_options |= NAND_BBT_USE_FLASH;
-
-	/* scan NAND device connected to chip controller */
-	nand_chip->options |= info->devsize & NAND_BUSWIDTH_16;
-	err = nand_scan_ident(mtd, 1, NULL);
-	if (err) {
-		dev_err(&info->pdev->dev,
-			"scan failed, may be bus-width mismatch\n");
-		goto return_error;
-	}
-
-	if (nand_chip->bbt_options & NAND_BBT_USE_FLASH)
-		nand_chip->bbt_options |= NAND_BBT_NO_OOB;
+	if (chip->bbt_options & NAND_BBT_USE_FLASH)
+		chip->bbt_options |= NAND_BBT_NO_OOB;
 	else
-		nand_chip->options |= NAND_SKIP_BBTSCAN;
+		chip->options |= NAND_SKIP_BBTSCAN;
 
-	/* re-populate low-level callbacks based on xfer modes */
+	/* Re-populate low-level callbacks based on xfer modes */
 	switch (info->xfer_type) {
 	case NAND_OMAP_PREFETCH_POLLED:
-		nand_chip->read_buf   = omap_read_buf_pref;
-		nand_chip->write_buf  = omap_write_buf_pref;
+		chip->read_buf = omap_read_buf_pref;
+		chip->write_buf = omap_write_buf_pref;
 		break;
 
 	case NAND_OMAP_POLLED:
@@ -2024,12 +1938,11 @@ static int omap_nand_probe(struct platform_device *pdev)
 	case NAND_OMAP_PREFETCH_DMA:
 		dma_cap_zero(mask);
 		dma_cap_set(DMA_SLAVE, mask);
-		info->dma = dma_request_chan(pdev->dev.parent, "rxtx");
+		info->dma = dma_request_chan(dev, "rxtx");
 
 		if (IS_ERR(info->dma)) {
-			dev_err(&pdev->dev, "DMA engine request failed\n");
-			err = PTR_ERR(info->dma);
-			goto return_error;
+			dev_err(dev, "DMA engine request failed\n");
+			return PTR_ERR(info->dma);
 		} else {
 			struct dma_slave_config cfg;
 
@@ -2042,222 +1955,306 @@ static int omap_nand_probe(struct platform_device *pdev)
 			cfg.dst_maxburst = 16;
 			err = dmaengine_slave_config(info->dma, &cfg);
 			if (err) {
-				dev_err(&pdev->dev, "DMA engine slave config failed: %d\n",
+				dev_err(dev,
+					"DMA engine slave config failed: %d\n",
 					err);
-				goto return_error;
+				return err;
 			}
-			nand_chip->read_buf   = omap_read_buf_dma_pref;
-			nand_chip->write_buf  = omap_write_buf_dma_pref;
+			chip->read_buf = omap_read_buf_dma_pref;
+			chip->write_buf = omap_write_buf_dma_pref;
 		}
 		break;
 
 	case NAND_OMAP_PREFETCH_IRQ:
-		info->gpmc_irq_fifo = platform_get_irq(pdev, 0);
+		info->gpmc_irq_fifo = platform_get_irq(info->pdev, 0);
 		if (info->gpmc_irq_fifo <= 0) {
-			dev_err(&pdev->dev, "error getting fifo irq\n");
-			err = -ENODEV;
-			goto return_error;
+			dev_err(dev, "Error getting fifo IRQ\n");
+			return -ENODEV;
 		}
-		err = devm_request_irq(&pdev->dev, info->gpmc_irq_fifo,
+		err = devm_request_irq(dev, info->gpmc_irq_fifo,
 				       omap_nand_irq, IRQF_SHARED,
 				       "gpmc-nand-fifo", info);
 		if (err) {
-			dev_err(&pdev->dev, "requesting irq(%d) error:%d",
+			dev_err(dev, "Requesting IRQ %d, error %d\n",
 				info->gpmc_irq_fifo, err);
 			info->gpmc_irq_fifo = 0;
-			goto return_error;
+			return err;
 		}
 
-		info->gpmc_irq_count = platform_get_irq(pdev, 1);
+		info->gpmc_irq_count = platform_get_irq(info->pdev, 1);
 		if (info->gpmc_irq_count <= 0) {
-			dev_err(&pdev->dev, "error getting count irq\n");
-			err = -ENODEV;
-			goto return_error;
+			dev_err(dev, "Error getting IRQ count\n");
+			return -ENODEV;
 		}
-		err = devm_request_irq(&pdev->dev, info->gpmc_irq_count,
+		err = devm_request_irq(dev, info->gpmc_irq_count,
 				       omap_nand_irq, IRQF_SHARED,
 				       "gpmc-nand-count", info);
 		if (err) {
-			dev_err(&pdev->dev, "requesting irq(%d) error:%d",
+			dev_err(dev, "Requesting IRQ %d, error %d\n",
 				info->gpmc_irq_count, err);
 			info->gpmc_irq_count = 0;
-			goto return_error;
+			return err;
 		}
 
-		nand_chip->read_buf  = omap_read_buf_irq_pref;
-		nand_chip->write_buf = omap_write_buf_irq_pref;
+		chip->read_buf = omap_read_buf_irq_pref;
+		chip->write_buf = omap_write_buf_irq_pref;
 
 		break;
 
 	default:
-		dev_err(&pdev->dev,
-			"xfer_type(%d) not supported!\n", info->xfer_type);
-		err = -EINVAL;
-		goto return_error;
+		dev_err(dev, "xfer_type %d not supported!\n", info->xfer_type);
+		return -EINVAL;
 	}
 
-	if (!omap2_nand_ecc_check(info)) {
-		err = -EINVAL;
-		goto return_error;
-	}
+	if (!omap2_nand_ecc_check(info))
+		return -EINVAL;
 
 	/*
 	 * Bail out earlier to let NAND_ECC_SOFT code create its own
 	 * ooblayout instead of using ours.
 	 */
 	if (info->ecc_opt == OMAP_ECC_HAM1_CODE_SW) {
-		nand_chip->ecc.mode = NAND_ECC_SOFT;
-		nand_chip->ecc.algo = NAND_ECC_HAMMING;
-		goto scan_tail;
+		chip->ecc.mode = NAND_ECC_SOFT;
+		chip->ecc.algo = NAND_ECC_HAMMING;
+		return 0;
 	}
 
-	/* populate MTD interface based on ECC scheme */
+	/* Populate MTD interface based on ECC scheme */
 	switch (info->ecc_opt) {
 	case OMAP_ECC_HAM1_CODE_HW:
-		pr_info("nand: using OMAP_ECC_HAM1_CODE_HW\n");
-		nand_chip->ecc.mode             = NAND_ECC_HW;
-		nand_chip->ecc.bytes            = 3;
-		nand_chip->ecc.size             = 512;
-		nand_chip->ecc.strength         = 1;
-		nand_chip->ecc.calculate        = omap_calculate_ecc;
-		nand_chip->ecc.hwctl            = omap_enable_hwecc;
-		nand_chip->ecc.correct          = omap_correct_data;
+		dev_info(dev, "nand: using OMAP_ECC_HAM1_CODE_HW\n");
+		chip->ecc.mode		= NAND_ECC_HW;
+		chip->ecc.bytes		= 3;
+		chip->ecc.size		= 512;
+		chip->ecc.strength	= 1;
+		chip->ecc.calculate	= omap_calculate_ecc;
+		chip->ecc.hwctl		= omap_enable_hwecc;
+		chip->ecc.correct	= omap_correct_data;
 		mtd_set_ooblayout(mtd, &omap_ooblayout_ops);
-		oobbytes_per_step		= nand_chip->ecc.bytes;
+		oobbytes_per_step	= chip->ecc.bytes;
 
-		if (!(nand_chip->options & NAND_BUSWIDTH_16))
+		if (!(chip->options & NAND_BUSWIDTH_16))
 			min_oobbytes	= 1;
 
 		break;
 
 	case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
 		pr_info("nand: using OMAP_ECC_BCH4_CODE_HW_DETECTION_SW\n");
-		nand_chip->ecc.mode		= NAND_ECC_HW;
-		nand_chip->ecc.size		= 512;
-		nand_chip->ecc.bytes		= 7;
-		nand_chip->ecc.strength		= 4;
-		nand_chip->ecc.hwctl		= omap_enable_hwecc_bch;
-		nand_chip->ecc.correct		= nand_bch_correct_data;
-		nand_chip->ecc.calculate	= omap_calculate_ecc_bch_sw;
+		chip->ecc.mode		= NAND_ECC_HW;
+		chip->ecc.size		= 512;
+		chip->ecc.bytes		= 7;
+		chip->ecc.strength	= 4;
+		chip->ecc.hwctl		= omap_enable_hwecc_bch;
+		chip->ecc.correct	= nand_bch_correct_data;
+		chip->ecc.calculate	= omap_calculate_ecc_bch_sw;
 		mtd_set_ooblayout(mtd, &omap_sw_ooblayout_ops);
 		/* Reserve one byte for the OMAP marker */
-		oobbytes_per_step		= nand_chip->ecc.bytes + 1;
-		/* software bch library is used for locating errors */
-		nand_chip->ecc.priv		= nand_bch_init(mtd);
-		if (!nand_chip->ecc.priv) {
-			dev_err(&info->pdev->dev, "unable to use BCH library\n");
-			err = -EINVAL;
-			goto return_error;
+		oobbytes_per_step	= chip->ecc.bytes + 1;
+		/* Software BCH library is used for locating errors */
+		chip->ecc.priv		= nand_bch_init(mtd);
+		if (!chip->ecc.priv) {
+			dev_err(dev, "Unable to use BCH library\n");
+			return -EINVAL;
 		}
 		break;
 
 	case OMAP_ECC_BCH4_CODE_HW:
 		pr_info("nand: using OMAP_ECC_BCH4_CODE_HW ECC scheme\n");
-		nand_chip->ecc.mode		= NAND_ECC_HW;
-		nand_chip->ecc.size		= 512;
+		chip->ecc.mode		= NAND_ECC_HW;
+		chip->ecc.size		= 512;
 		/* 14th bit is kept reserved for ROM-code compatibility */
-		nand_chip->ecc.bytes		= 7 + 1;
-		nand_chip->ecc.strength		= 4;
-		nand_chip->ecc.hwctl		= omap_enable_hwecc_bch;
-		nand_chip->ecc.correct		= omap_elm_correct_data;
-		nand_chip->ecc.read_page	= omap_read_page_bch;
-		nand_chip->ecc.write_page	= omap_write_page_bch;
-		nand_chip->ecc.write_subpage	= omap_write_subpage_bch;
+		chip->ecc.bytes		= 7 + 1;
+		chip->ecc.strength	= 4;
+		chip->ecc.hwctl		= omap_enable_hwecc_bch;
+		chip->ecc.correct	= omap_elm_correct_data;
+		chip->ecc.read_page	= omap_read_page_bch;
+		chip->ecc.write_page	= omap_write_page_bch;
+		chip->ecc.write_subpage	= omap_write_subpage_bch;
 		mtd_set_ooblayout(mtd, &omap_ooblayout_ops);
-		oobbytes_per_step		= nand_chip->ecc.bytes;
+		oobbytes_per_step	= chip->ecc.bytes;
 
 		err = elm_config(info->elm_dev, BCH4_ECC,
-				 mtd->writesize / nand_chip->ecc.size,
-				 nand_chip->ecc.size, nand_chip->ecc.bytes);
+				 mtd->writesize / chip->ecc.size,
+				 chip->ecc.size, chip->ecc.bytes);
 		if (err < 0)
-			goto return_error;
+			return err;
 		break;
 
 	case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
 		pr_info("nand: using OMAP_ECC_BCH8_CODE_HW_DETECTION_SW\n");
-		nand_chip->ecc.mode		= NAND_ECC_HW;
-		nand_chip->ecc.size		= 512;
-		nand_chip->ecc.bytes		= 13;
-		nand_chip->ecc.strength		= 8;
-		nand_chip->ecc.hwctl		= omap_enable_hwecc_bch;
-		nand_chip->ecc.correct		= nand_bch_correct_data;
-		nand_chip->ecc.calculate	= omap_calculate_ecc_bch_sw;
+		chip->ecc.mode		= NAND_ECC_HW;
+		chip->ecc.size		= 512;
+		chip->ecc.bytes		= 13;
+		chip->ecc.strength	= 8;
+		chip->ecc.hwctl		= omap_enable_hwecc_bch;
+		chip->ecc.correct	= nand_bch_correct_data;
+		chip->ecc.calculate	= omap_calculate_ecc_bch_sw;
 		mtd_set_ooblayout(mtd, &omap_sw_ooblayout_ops);
 		/* Reserve one byte for the OMAP marker */
-		oobbytes_per_step		= nand_chip->ecc.bytes + 1;
-		/* software bch library is used for locating errors */
-		nand_chip->ecc.priv		= nand_bch_init(mtd);
-		if (!nand_chip->ecc.priv) {
-			dev_err(&info->pdev->dev, "unable to use BCH library\n");
-			err = -EINVAL;
-			goto return_error;
+		oobbytes_per_step	= chip->ecc.bytes + 1;
+		/* Software BCH library is used for locating errors */
+		chip->ecc.priv		= nand_bch_init(mtd);
+		if (!chip->ecc.priv) {
+			dev_err(dev, "unable to use BCH library\n");
+			return -EINVAL;
 		}
 		break;
 
 	case OMAP_ECC_BCH8_CODE_HW:
 		pr_info("nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme\n");
-		nand_chip->ecc.mode		= NAND_ECC_HW;
-		nand_chip->ecc.size		= 512;
+		chip->ecc.mode		= NAND_ECC_HW;
+		chip->ecc.size		= 512;
 		/* 14th bit is kept reserved for ROM-code compatibility */
-		nand_chip->ecc.bytes		= 13 + 1;
-		nand_chip->ecc.strength		= 8;
-		nand_chip->ecc.hwctl		= omap_enable_hwecc_bch;
-		nand_chip->ecc.correct		= omap_elm_correct_data;
-		nand_chip->ecc.read_page	= omap_read_page_bch;
-		nand_chip->ecc.write_page	= omap_write_page_bch;
-		nand_chip->ecc.write_subpage	= omap_write_subpage_bch;
+		chip->ecc.bytes		= 13 + 1;
+		chip->ecc.strength	= 8;
+		chip->ecc.hwctl		= omap_enable_hwecc_bch;
+		chip->ecc.correct	= omap_elm_correct_data;
+		chip->ecc.read_page	= omap_read_page_bch;
+		chip->ecc.write_page	= omap_write_page_bch;
+		chip->ecc.write_subpage	= omap_write_subpage_bch;
 		mtd_set_ooblayout(mtd, &omap_ooblayout_ops);
-		oobbytes_per_step		= nand_chip->ecc.bytes;
+		oobbytes_per_step	= chip->ecc.bytes;
 
 		err = elm_config(info->elm_dev, BCH8_ECC,
-				 mtd->writesize / nand_chip->ecc.size,
-				 nand_chip->ecc.size, nand_chip->ecc.bytes);
+				 mtd->writesize / chip->ecc.size,
+				 chip->ecc.size, chip->ecc.bytes);
 		if (err < 0)
-			goto return_error;
+			return err;
 
 		break;
 
 	case OMAP_ECC_BCH16_CODE_HW:
-		pr_info("using OMAP_ECC_BCH16_CODE_HW ECC scheme\n");
-		nand_chip->ecc.mode		= NAND_ECC_HW;
-		nand_chip->ecc.size		= 512;
-		nand_chip->ecc.bytes		= 26;
-		nand_chip->ecc.strength		= 16;
-		nand_chip->ecc.hwctl		= omap_enable_hwecc_bch;
-		nand_chip->ecc.correct		= omap_elm_correct_data;
-		nand_chip->ecc.read_page	= omap_read_page_bch;
-		nand_chip->ecc.write_page	= omap_write_page_bch;
-		nand_chip->ecc.write_subpage	= omap_write_subpage_bch;
+		pr_info("Using OMAP_ECC_BCH16_CODE_HW ECC scheme\n");
+		chip->ecc.mode		= NAND_ECC_HW;
+		chip->ecc.size		= 512;
+		chip->ecc.bytes		= 26;
+		chip->ecc.strength	= 16;
+		chip->ecc.hwctl		= omap_enable_hwecc_bch;
+		chip->ecc.correct	= omap_elm_correct_data;
+		chip->ecc.read_page	= omap_read_page_bch;
+		chip->ecc.write_page	= omap_write_page_bch;
+		chip->ecc.write_subpage	= omap_write_subpage_bch;
 		mtd_set_ooblayout(mtd, &omap_ooblayout_ops);
-		oobbytes_per_step		= nand_chip->ecc.bytes;
+		oobbytes_per_step	= chip->ecc.bytes;
 
 		err = elm_config(info->elm_dev, BCH16_ECC,
-				 mtd->writesize / nand_chip->ecc.size,
-				 nand_chip->ecc.size, nand_chip->ecc.bytes);
+				 mtd->writesize / chip->ecc.size,
+				 chip->ecc.size, chip->ecc.bytes);
 		if (err < 0)
-			goto return_error;
+			return err;
 
 		break;
 	default:
-		dev_err(&info->pdev->dev, "invalid or unsupported ECC scheme\n");
-		err = -EINVAL;
-		goto return_error;
+		dev_err(dev, "Invalid or unsupported ECC scheme\n");
+		return -EINVAL;
 	}
 
-	/* check if NAND device's OOB is enough to store ECC signatures */
+	/* Check if NAND device's OOB is enough to store ECC signatures */
 	min_oobbytes += (oobbytes_per_step *
-			 (mtd->writesize / nand_chip->ecc.size));
+			 (mtd->writesize / chip->ecc.size));
 	if (mtd->oobsize < min_oobbytes) {
-		dev_err(&info->pdev->dev,
-			"not enough OOB bytes required = %d, available=%d\n",
+		dev_err(dev,
+			"Not enough OOB bytes: required = %d, available=%d\n",
 			min_oobbytes, mtd->oobsize);
-		err = -EINVAL;
-		goto return_error;
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct nand_controller_ops omap_nand_controller_ops = {
+	.attach_chip = omap_nand_attach_chip,
+};
+
+/* Shared among all NAND instances to synchronize access to the ECC Engine */
+static struct nand_controller omap_gpmc_controller = {
+	.lock = __SPIN_LOCK_UNLOCKED(omap_gpmc_controller.lock),
+	.wq = __WAIT_QUEUE_HEAD_INITIALIZER(omap_gpmc_controller.wq),
+	.ops = &omap_nand_controller_ops,
+};
+
+static int omap_nand_probe(struct platform_device *pdev)
+{
+	struct omap_nand_info		*info;
+	struct mtd_info			*mtd;
+	struct nand_chip		*nand_chip;
+	int				err;
+	struct resource			*res;
+	struct device			*dev = &pdev->dev;
+
+	info = devm_kzalloc(&pdev->dev, sizeof(struct omap_nand_info),
+				GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->pdev = pdev;
+
+	err = omap_get_dt_info(dev, info);
+	if (err)
+		return err;
+
+	info->ops = gpmc_omap_get_nand_ops(&info->reg, info->gpmc_cs);
+	if (!info->ops) {
+		dev_err(&pdev->dev, "Failed to get GPMC->NAND interface\n");
+		return -ENODEV;
+	}
+
+	nand_chip		= &info->nand;
+	mtd			= nand_to_mtd(nand_chip);
+	mtd->dev.parent		= &pdev->dev;
+	nand_chip->ecc.priv	= NULL;
+	nand_set_flash_node(nand_chip, dev->of_node);
+
+	if (!mtd->name) {
+		mtd->name = devm_kasprintf(&pdev->dev, GFP_KERNEL,
+					   "omap2-nand.%d", info->gpmc_cs);
+		if (!mtd->name) {
+			dev_err(&pdev->dev, "Failed to set MTD name\n");
+			return -ENOMEM;
+		}
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	nand_chip->IO_ADDR_R = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(nand_chip->IO_ADDR_R))
+		return PTR_ERR(nand_chip->IO_ADDR_R);
+
+	info->phys_base = res->start;
+
+	nand_chip->controller = &omap_gpmc_controller;
+
+	nand_chip->IO_ADDR_W = nand_chip->IO_ADDR_R;
+	nand_chip->cmd_ctrl  = omap_hwcontrol;
+
+	info->ready_gpiod = devm_gpiod_get_optional(&pdev->dev, "rb",
+						    GPIOD_IN);
+	if (IS_ERR(info->ready_gpiod)) {
+		dev_err(dev, "failed to get ready gpio\n");
+		return PTR_ERR(info->ready_gpiod);
 	}
 
-scan_tail:
-	/* second phase scan */
-	err = nand_scan_tail(mtd);
+	/*
+	 * If RDY/BSY line is connected to OMAP then use the omap ready
+	 * function and the generic nand_wait function which reads the status
+	 * register after monitoring the RDY/BSY line. Otherwise use a standard
+	 * chip delay which is slightly more than tR (AC Timing) of the NAND
+	 * device and read status register until you get a failure or success
+	 */
+	if (info->ready_gpiod) {
+		nand_chip->dev_ready = omap_dev_ready;
+		nand_chip->chip_delay = 0;
+	} else {
+		nand_chip->waitfunc = omap_wait;
+		nand_chip->chip_delay = 50;
+	}
+
+	if (info->flash_bbt)
+		nand_chip->bbt_options |= NAND_BBT_USE_FLASH;
+
+	/* scan NAND device connected to chip controller */
+	nand_chip->options |= info->devsize & NAND_BUSWIDTH_16;
+
+	err = nand_scan(mtd, 1);
 	if (err)
 		goto return_error;