Merge branch 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac

Pull edac fixes from Mauro Carvalho Chehab:
 "Two edac fixes:

   - i7300_edac currently reports a wrong number of DIMMs when the
     memory controller is in single channel mode

   - on some Sandy Bridge machines, the EDAC driver bails out as one of
     the PCI IDs used by the driver is hidden by BIOS.  As the driver
     uses it only to detect the type of memory, make it optional at the
     driver"

* 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac:
  edac: sb_edac.c should not require prescence of IMC_DDRIO device
  i7300_edac: Fix memory detection in single mode

drivers/edac/i7300_edac.c

@@ -750,15 +750,23 @@ static int i7300_init_csrows(struct mem_ctl_info *mci)
 	struct i7300_dimm_info *dinfo;
 	int rc = -ENODEV;
 	int mtr;
-	int ch, branch, slot, channel;
+	int ch, branch, slot, channel, max_channel, max_branch;
 	struct dimm_info *dimm;
 
 	pvt = mci->pvt_info;
 
 	edac_dbg(2, "Memory Technology Registers:\n");
 
+	if (IS_SINGLE_MODE(pvt->mc_settings_a)) {
+		max_branch = 1;
+		max_channel = 1;
+	} else {
+		max_branch = MAX_BRANCHES;
+		max_channel = MAX_CH_PER_BRANCH;
+	}
+
 	/* Get the AMB present registers for the four channels */
-	for (branch = 0; branch < MAX_BRANCHES; branch++) {
+	for (branch = 0; branch < max_branch; branch++) {
 		/* Read and dump branch 0's MTRs */
 		channel = to_channel(0, branch);
 		pci_read_config_word(pvt->pci_dev_2x_0_fbd_branch[branch],
@@ -767,6 +775,9 @@ static int i7300_init_csrows(struct mem_ctl_info *mci)
 		edac_dbg(2, "\t\tAMB-present CH%d = 0x%x:\n",
 			 channel, pvt->ambpresent[channel]);
 
+		if (max_channel == 1)
+			continue;
+
 		channel = to_channel(1, branch);
 		pci_read_config_word(pvt->pci_dev_2x_0_fbd_branch[branch],
 				     AMBPRESENT_1,
@@ -778,11 +789,11 @@ static int i7300_init_csrows(struct mem_ctl_info *mci)
 	/* Get the set of MTR[0-7] regs by each branch */
 	for (slot = 0; slot < MAX_SLOTS; slot++) {
 		int where = mtr_regs[slot];
-		for (branch = 0; branch < MAX_BRANCHES; branch++) {
+		for (branch = 0; branch < max_branch; branch++) {
 			pci_read_config_word(pvt->pci_dev_2x_0_fbd_branch[branch],
 					where,
 					&pvt->mtr[slot][branch]);
-			for (ch = 0; ch < MAX_CH_PER_BRANCH; ch++) {
+			for (ch = 0; ch < max_channel; ch++) {
 				int channel = to_channel(ch, branch);
 
 				dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms,

drivers/edac/sb_edac.c

@@ -331,30 +331,31 @@ struct sbridge_pvt {
 	u64			tolm, tohm;
 };
 
-#define PCI_DESCR(device, function, device_id)	\
+#define PCI_DESCR(device, function, device_id, opt)	\
 	.dev = (device),				\
 	.func = (function),				\
-	.dev_id = (device_id)
+	.dev_id = (device_id),				\
+	.optional = opt
 
 static const struct pci_id_descr pci_dev_descr_sbridge[] = {
 		/* Processor Home Agent */
-	{ PCI_DESCR(14, 0, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_HA0)		},
+	{ PCI_DESCR(14, 0, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_HA0, 0)	},
 
 		/* Memory controller */
-	{ PCI_DESCR(15, 0, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TA)		},
-	{ PCI_DESCR(15, 1, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_RAS)		},
-	{ PCI_DESCR(15, 2, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD0)	},
-	{ PCI_DESCR(15, 3, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD1)	},
-	{ PCI_DESCR(15, 4, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD2)	},
-	{ PCI_DESCR(15, 5, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD3)	},
-	{ PCI_DESCR(17, 0, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_DDRIO)	},
+	{ PCI_DESCR(15, 0, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TA, 0)	},
+	{ PCI_DESCR(15, 1, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_RAS, 0)	},
+	{ PCI_DESCR(15, 2, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD0, 0)	},
+	{ PCI_DESCR(15, 3, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD1, 0)	},
+	{ PCI_DESCR(15, 4, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD2, 0)	},
+	{ PCI_DESCR(15, 5, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD3, 0)	},
+	{ PCI_DESCR(17, 0, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_DDRIO, 1)	},
 
 		/* System Address Decoder */
-	{ PCI_DESCR(12, 6, PCI_DEVICE_ID_INTEL_SBRIDGE_SAD0)		},
-	{ PCI_DESCR(12, 7, PCI_DEVICE_ID_INTEL_SBRIDGE_SAD1)		},
+	{ PCI_DESCR(12, 6, PCI_DEVICE_ID_INTEL_SBRIDGE_SAD0, 0)		},
+	{ PCI_DESCR(12, 7, PCI_DEVICE_ID_INTEL_SBRIDGE_SAD1, 0)		},
 
 		/* Broadcast Registers */
-	{ PCI_DESCR(13, 6, PCI_DEVICE_ID_INTEL_SBRIDGE_BR)		},
+	{ PCI_DESCR(13, 6, PCI_DEVICE_ID_INTEL_SBRIDGE_BR, 0)		},
 };
 
 #define PCI_ID_TABLE_ENTRY(A) { .descr=A, .n_devs = ARRAY_SIZE(A) }
@@ -556,6 +557,7 @@ static int get_dimm_config(struct mem_ctl_info *mci)
 		pvt->is_close_pg = false;
 	}
 
+	if (pvt->pci_ddrio) {
 		pci_read_config_dword(pvt->pci_ddrio, RANK_CFG_A, &reg);
 		if (IS_RDIMM_ENABLED(reg)) {
 			/* FIXME: Can also be LRDIMM */
@@ -565,6 +567,10 @@ static int get_dimm_config(struct mem_ctl_info *mci)
 			edac_dbg(0, "Memory is unregistered\n");
 			mtype = MEM_DDR3;
 		}
+	} else {
+		edac_dbg(0, "Cannot determine memory type\n");
+		mtype = MEM_UNKNOWN;
+	}
 
 	/* On all supported DDR3 DIMM types, there are 8 banks available */
 	banks = 8;
@@ -1303,8 +1309,7 @@ static int mci_bind_devs(struct mem_ctl_info *mci,
 
 	/* Check if everything were registered */
 	if (!pvt->pci_sad0 || !pvt->pci_sad1 || !pvt->pci_ha0 ||
-	    !pvt-> pci_tad || !pvt->pci_ras  || !pvt->pci_ta ||
-	    !pvt->pci_ddrio)
+	    !pvt-> pci_tad || !pvt->pci_ras  || !pvt->pci_ta)
 		goto enodev;
 
 	for (i = 0; i < NUM_CHANNELS; i++) {