spi/dw_spi: clean the cs_control code

commit 052dc7c4i "spi/dw_spi: conditional transfer mode change"
introduced cs_control code, which has a bug by using bit offset
for spi mode to set transfer mode in control register. Also it
forces devices who don't need cs_control to re-configure the
control registers for each spi transfer. This patch will fix them
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

drivers/spi/dw_spi.c

@@ -181,10 +181,6 @@ static void flush(struct dw_spi *dws)
 	wait_till_not_busy(dws);
 }
 
-static void null_cs_control(u32 command)
-{
-}
-
 static int null_writer(struct dw_spi *dws)
 {
 	u8 n_bytes = dws->n_bytes;
@@ -322,7 +318,7 @@ static void giveback(struct dw_spi *dws)
 					struct spi_transfer,
 					transfer_list);
 
-	if (!last_transfer->cs_change)
+	if (!last_transfer->cs_change && dws->cs_control)
 		dws->cs_control(MRST_SPI_DEASSERT);
 
 	msg->state = NULL;
@@ -549,13 +545,13 @@ static void pump_transfers(unsigned long data)
 	 */
 	if (dws->cs_control) {
 		if (dws->rx && dws->tx)
-			chip->tmode = 0x00;
+			chip->tmode = SPI_TMOD_TR;
 		else if (dws->rx)
-			chip->tmode = 0x02;
+			chip->tmode = SPI_TMOD_RO;
 		else
-			chip->tmode = 0x01;
+			chip->tmode = SPI_TMOD_TO;
 
-		cr0 &= ~(0x3 << SPI_MODE_OFFSET);
+		cr0 &= ~SPI_TMOD_MASK;
 		cr0 |= (chip->tmode << SPI_TMOD_OFFSET);
 	}
 
@@ -704,9 +700,6 @@ static int dw_spi_setup(struct spi_device *spi)
 		chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
 		if (!chip)
 			return -ENOMEM;
-
-		chip->cs_control = null_cs_control;
-		chip->enable_dma = 0;
 	}
 
 	/*

include/linux/spi/dw_spi.h

@@ -14,7 +14,9 @@
 #define SPI_MODE_OFFSET			6
 #define SPI_SCPH_OFFSET			6
 #define SPI_SCOL_OFFSET			7
+
 #define SPI_TMOD_OFFSET			8
+#define SPI_TMOD_MASK			(0x3 << SPI_TMOD_OFFSET)
 #define	SPI_TMOD_TR			0x0		/* xmit & recv */
 #define SPI_TMOD_TO			0x1		/* xmit only */
 #define SPI_TMOD_RO			0x2		/* recv only */