Commit e4b081f5 authored by Claudiu Manoil's avatar Claudiu Manoil Committed by David S. Miller

net/fsl_pq_mdio: Replace spin_event_timeout() with arch independent

spin_event_timeout() is PPC dependent, use an arch independent
equivalent instead.
Signed-off-by: default avatarClaudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent f5bbd262
...@@ -104,7 +104,7 @@ static int fsl_pq_mdio_write(struct mii_bus *bus, int mii_id, int regnum, ...@@ -104,7 +104,7 @@ static int fsl_pq_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
{ {
struct fsl_pq_mdio_priv *priv = bus->priv; struct fsl_pq_mdio_priv *priv = bus->priv;
struct fsl_pq_mii __iomem *regs = priv->regs; struct fsl_pq_mii __iomem *regs = priv->regs;
u32 status; unsigned int timeout;
/* Set the PHY address and the register address we want to write */ /* Set the PHY address and the register address we want to write */
iowrite32be((mii_id << 8) | regnum, &regs->miimadd); iowrite32be((mii_id << 8) | regnum, &regs->miimadd);
...@@ -113,10 +113,13 @@ static int fsl_pq_mdio_write(struct mii_bus *bus, int mii_id, int regnum, ...@@ -113,10 +113,13 @@ static int fsl_pq_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
iowrite32be(value, &regs->miimcon); iowrite32be(value, &regs->miimcon);
/* Wait for the transaction to finish */ /* Wait for the transaction to finish */
status = spin_event_timeout(!(ioread32be(&regs->miimind) & timeout = MII_TIMEOUT;
MIIMIND_BUSY), MII_TIMEOUT, 0); while ((ioread32be(&regs->miimind) & MIIMIND_BUSY) && timeout) {
cpu_relax();
timeout--;
}
return status ? 0 : -ETIMEDOUT; return timeout ? 0 : -ETIMEDOUT;
} }
/* /*
...@@ -133,7 +136,7 @@ static int fsl_pq_mdio_read(struct mii_bus *bus, int mii_id, int regnum) ...@@ -133,7 +136,7 @@ static int fsl_pq_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
{ {
struct fsl_pq_mdio_priv *priv = bus->priv; struct fsl_pq_mdio_priv *priv = bus->priv;
struct fsl_pq_mii __iomem *regs = priv->regs; struct fsl_pq_mii __iomem *regs = priv->regs;
u32 status; unsigned int timeout;
u16 value; u16 value;
/* Set the PHY address and the register address we want to read */ /* Set the PHY address and the register address we want to read */
...@@ -144,10 +147,14 @@ static int fsl_pq_mdio_read(struct mii_bus *bus, int mii_id, int regnum) ...@@ -144,10 +147,14 @@ static int fsl_pq_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
iowrite32be(MII_READ_COMMAND, &regs->miimcom); iowrite32be(MII_READ_COMMAND, &regs->miimcom);
/* Wait for the transaction to finish, normally less than 100us */ /* Wait for the transaction to finish, normally less than 100us */
status = spin_event_timeout(!(ioread32be(&regs->miimind) & timeout = MII_TIMEOUT;
(MIIMIND_NOTVALID | MIIMIND_BUSY)), while ((ioread32be(&regs->miimind) &
MII_TIMEOUT, 0); (MIIMIND_NOTVALID | MIIMIND_BUSY)) && timeout) {
if (!status) cpu_relax();
timeout--;
}
if (!timeout)
return -ETIMEDOUT; return -ETIMEDOUT;
/* Grab the value of the register from miimstat */ /* Grab the value of the register from miimstat */
...@@ -162,7 +169,7 @@ static int fsl_pq_mdio_reset(struct mii_bus *bus) ...@@ -162,7 +169,7 @@ static int fsl_pq_mdio_reset(struct mii_bus *bus)
{ {
struct fsl_pq_mdio_priv *priv = bus->priv; struct fsl_pq_mdio_priv *priv = bus->priv;
struct fsl_pq_mii __iomem *regs = priv->regs; struct fsl_pq_mii __iomem *regs = priv->regs;
u32 status; unsigned int timeout;
mutex_lock(&bus->mdio_lock); mutex_lock(&bus->mdio_lock);
...@@ -173,12 +180,15 @@ static int fsl_pq_mdio_reset(struct mii_bus *bus) ...@@ -173,12 +180,15 @@ static int fsl_pq_mdio_reset(struct mii_bus *bus)
iowrite32be(MIIMCFG_INIT_VALUE, &regs->miimcfg); iowrite32be(MIIMCFG_INIT_VALUE, &regs->miimcfg);
/* Wait until the bus is free */ /* Wait until the bus is free */
status = spin_event_timeout(!(ioread32be(&regs->miimind) & timeout = MII_TIMEOUT;
MIIMIND_BUSY), MII_TIMEOUT, 0); while ((ioread32be(&regs->miimind) & MIIMIND_BUSY) && timeout) {
cpu_relax();
timeout--;
}
mutex_unlock(&bus->mdio_lock); mutex_unlock(&bus->mdio_lock);
if (!status) { if (!timeout) {
dev_err(&bus->dev, "timeout waiting for MII bus\n"); dev_err(&bus->dev, "timeout waiting for MII bus\n");
return -EBUSY; return -EBUSY;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment