Commit e4e3a2ce authored by Quinn Tran's avatar Quinn Tran Committed by Martin K. Petersen

scsi: qla2xxx: Add ability to autodetect SFP type

SFP can come in 2 formats: short range/SR and long range/LR.  For LR,
user the can increase the number of Buffer to Buffer credits between end
points via Cavium's command line tool.  By default, FW uses a lower BB
Credit value optimized for SR.  This patch will read the SFP for each
link up event and during chip reset sequence. If the SFP type and
setting are mismatch, then the chip is reset 1 time to use the
appropriate setting.
Signed-off-by: default avatarQuinn Tran <quinn.tran@cavium.com>
Signed-off-by: default avatarHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent b2e8ae3f
......@@ -565,47 +565,17 @@ qla2x00_sysfs_read_sfp(struct file *filp, struct kobject *kobj,
{
struct scsi_qla_host *vha = shost_priv(dev_to_shost(container_of(kobj,
struct device, kobj)));
struct qla_hw_data *ha = vha->hw;
uint16_t iter, addr, offset;
int rval;
if (!capable(CAP_SYS_ADMIN) || off != 0 || count != SFP_DEV_SIZE * 2)
if (!capable(CAP_SYS_ADMIN) || off != 0 || count < SFP_DEV_SIZE)
return 0;
if (ha->sfp_data)
goto do_read;
ha->sfp_data = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL,
&ha->sfp_data_dma);
if (!ha->sfp_data) {
ql_log(ql_log_warn, vha, 0x706c,
"Unable to allocate memory for SFP read-data.\n");
if (qla2x00_reset_active(vha))
return 0;
}
do_read:
memset(ha->sfp_data, 0, SFP_BLOCK_SIZE);
addr = 0xa0;
for (iter = 0, offset = 0; iter < (SFP_DEV_SIZE * 2) / SFP_BLOCK_SIZE;
iter++, offset += SFP_BLOCK_SIZE) {
if (iter == 4) {
/* Skip to next device address. */
addr = 0xa2;
offset = 0;
}
rval = qla2x00_read_sfp(vha, ha->sfp_data_dma, ha->sfp_data,
addr, offset, SFP_BLOCK_SIZE, BIT_1);
if (rval != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0x706d,
"Unable to read SFP data (%x/%x/%x).\n", rval,
addr, offset);
rval = qla2x00_read_sfp_dev(vha, buf, count);
if (rval)
return -EIO;
}
memcpy(buf, ha->sfp_data, SFP_BLOCK_SIZE);
buf += SFP_BLOCK_SIZE;
}
return count;
}
......@@ -615,7 +585,7 @@ static struct bin_attribute sysfs_sfp_attr = {
.name = "sfp",
.mode = S_IRUSR | S_IWUSR,
},
.size = SFP_DEV_SIZE * 2,
.size = SFP_DEV_SIZE,
.read = qla2x00_sysfs_read_sfp,
};
......
......@@ -3465,8 +3465,15 @@ struct qla_hw_data {
uint32_t n2n_ae:1;
uint32_t fw_started:1;
uint32_t fw_init_done:1;
uint32_t detected_lr_sfp:1;
uint32_t using_lr_setting:1;
} flags;
u8 long_range_distance; /* 32G & above */
#define LR_DISTANCE_5K 1
#define LR_DISTANCE_10K 0
/* This spinlock is used to protect "io transactions", you must
* acquire it before doing any IO to the card, eg with RD_REG*() and
* WRT_REG*() for the duration of your entire commandtransaction.
......@@ -3714,7 +3721,7 @@ struct qla_hw_data {
struct sns_cmd_pkt *sns_cmd;
dma_addr_t sns_cmd_dma;
#define SFP_DEV_SIZE 256
#define SFP_DEV_SIZE 512
#define SFP_BLOCK_SIZE 64
void *sfp_data;
dma_addr_t sfp_data_dma;
......@@ -4095,6 +4102,7 @@ typedef struct scsi_qla_host {
#define FX00_HOST_INFO_RESEND 26
#define QPAIR_ONLINE_CHECK_NEEDED 27
#define SET_ZIO_THRESHOLD_NEEDED 28
#define DETECT_SFP_CHANGE 29
unsigned long pci_flags;
#define PFLG_DISCONNECTED 0 /* PCI device removed */
......@@ -4378,6 +4386,88 @@ enum nexus_wait_type {
WAIT_LUN,
};
/* Refer to SNIA SFF 8247 */
struct sff_8247_a0 {
u8 txid; /* transceiver id */
u8 ext_txid;
u8 connector;
/* compliance code */
u8 eth_infi_cc3; /* ethernet, inifiband */
u8 sonet_cc4[2];
u8 eth_cc6;
/* link length */
#define FC_LL_VL BIT_7 /* very long */
#define FC_LL_S BIT_6 /* Short */
#define FC_LL_I BIT_5 /* Intermidiate*/
#define FC_LL_L BIT_4 /* Long */
#define FC_LL_M BIT_3 /* Medium */
#define FC_LL_SA BIT_2 /* ShortWave laser */
#define FC_LL_LC BIT_1 /* LongWave laser */
#define FC_LL_EL BIT_0 /* Electrical inter enclosure */
u8 fc_ll_cc7;
/* FC technology */
#define FC_TEC_EL BIT_7 /* Electrical inter enclosure */
#define FC_TEC_SN BIT_6 /* short wave w/o OFC */
#define FC_TEC_SL BIT_5 /* short wave with OFC */
#define FC_TEC_LL BIT_4 /* Longwave Laser */
#define FC_TEC_ACT BIT_3 /* Active cable */
#define FC_TEC_PAS BIT_2 /* Passive cable */
u8 fc_tec_cc8;
/* Transmission Media */
#define FC_MED_TW BIT_7 /* Twin Ax */
#define FC_MED_TP BIT_6 /* Twited Pair */
#define FC_MED_MI BIT_5 /* Min Coax */
#define FC_MED_TV BIT_4 /* Video Coax */
#define FC_MED_M6 BIT_3 /* Multimode, 62.5um */
#define FC_MED_M5 BIT_2 /* Multimode, 50um */
#define FC_MED_SM BIT_0 /* Single Mode */
u8 fc_med_cc9;
/* speed FC_SP_12: 12*100M = 1200 MB/s */
#define FC_SP_12 BIT_7
#define FC_SP_8 BIT_6
#define FC_SP_16 BIT_5
#define FC_SP_4 BIT_4
#define FC_SP_32 BIT_3
#define FC_SP_2 BIT_2
#define FC_SP_1 BIT_0
u8 fc_sp_cc10;
u8 encode;
u8 bitrate;
u8 rate_id;
u8 length_km; /* offset 14/eh */
u8 length_100m;
u8 length_50um_10m;
u8 length_62um_10m;
u8 length_om4_10m;
u8 length_om3_10m;
#define SFF_VEN_NAME_LEN 16
u8 vendor_name[SFF_VEN_NAME_LEN]; /* offset 20/14h */
u8 tx_compat;
u8 vendor_oui[3];
#define SFF_PART_NAME_LEN 16
u8 vendor_pn[SFF_PART_NAME_LEN]; /* part number */
u8 vendor_rev[4];
u8 wavelength[2];
u8 resv;
u8 cc_base;
u8 options[2]; /* offset 64 */
u8 br_max;
u8 br_min;
u8 vendor_sn[16];
u8 date_code[8];
u8 diag;
u8 enh_options;
u8 sff_revision;
u8 cc_ext;
u8 vendor_specific[32];
u8 resv2[128];
};
#define AUTO_DETECT_SFP_SUPPORT(_vha)\
(ql2xautodetectsfp && !_vha->vp_idx && \
(IS_QLA25XX(_vha->hw) || IS_QLA81XX(_vha->hw) ||\
IS_QLA83XX(_vha->hw) || IS_QLA27XX(_vha->hw)))
#define USER_CTRL_IRQ(_ha) (ql2xuctrlirq && QLA_TGT_MODE_ENABLED() && \
(IS_QLA27XX(_ha) || IS_QLA83XX(_ha)))
......
......@@ -105,6 +105,7 @@ int qla24xx_async_notify_ack(scsi_qla_host_t *, fc_port_t *,
int qla24xx_post_newsess_work(struct scsi_qla_host *, port_id_t *, u8 *,
void *);
int qla24xx_fcport_handle_login(struct scsi_qla_host *, fc_port_t *);
int qla24xx_detect_sfp(scsi_qla_host_t *vha);
/*
* Global Data in qla_os.c source file.
......@@ -142,6 +143,7 @@ extern int ql2xfwholdabts;
extern int ql2xmvasynctoatio;
extern int ql2xuctrlirq;
extern int ql2xnvmeenable;
extern int ql2xautodetectsfp;
extern int qla2x00_loop_reset(scsi_qla_host_t *);
extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int);
......@@ -796,6 +798,7 @@ extern char *qdev_state(uint32_t);
extern void qla82xx_clear_pending_mbx(scsi_qla_host_t *);
extern int qla82xx_read_temperature(scsi_qla_host_t *);
extern int qla8044_read_temperature(scsi_qla_host_t *);
extern int qla2x00_read_sfp_dev(struct scsi_qla_host *, char *, int);
/* BSG related functions */
extern int qla24xx_bsg_request(struct bsg_job *);
......
......@@ -2823,6 +2823,147 @@ qla2x00_alloc_outstanding_cmds(struct qla_hw_data *ha, struct req_que *req)
return QLA_SUCCESS;
}
#define PRINT_FIELD(_field, _flag, _str) { \
if (a0->_field & _flag) {\
if (p) {\
strcat(ptr, "|");\
ptr++;\
leftover--;\
} \
len = snprintf(ptr, leftover, "%s", _str); \
p = 1;\
leftover -= len;\
ptr += len; \
} \
}
static void qla2xxx_print_sfp_info(struct scsi_qla_host *vha)
{
#define STR_LEN 64
struct sff_8247_a0 *a0 = (struct sff_8247_a0 *)vha->hw->sfp_data;
u8 str[STR_LEN], *ptr, p;
int leftover, len;
memset(str, 0, STR_LEN);
snprintf(str, SFF_VEN_NAME_LEN+1, a0->vendor_name);
ql_dbg(ql_dbg_init, vha, 0x015a,
"SFP MFG Name: %s\n", str);
memset(str, 0, STR_LEN);
snprintf(str, SFF_PART_NAME_LEN+1, a0->vendor_pn);
ql_dbg(ql_dbg_init, vha, 0x015c,
"SFP Part Name: %s\n", str);
/* media */
memset(str, 0, STR_LEN);
ptr = str;
leftover = STR_LEN;
p = len = 0;
PRINT_FIELD(fc_med_cc9, FC_MED_TW, "Twin AX");
PRINT_FIELD(fc_med_cc9, FC_MED_TP, "Twisted Pair");
PRINT_FIELD(fc_med_cc9, FC_MED_MI, "Min Coax");
PRINT_FIELD(fc_med_cc9, FC_MED_TV, "Video Coax");
PRINT_FIELD(fc_med_cc9, FC_MED_M6, "MultiMode 62.5um");
PRINT_FIELD(fc_med_cc9, FC_MED_M5, "MultiMode 50um");
PRINT_FIELD(fc_med_cc9, FC_MED_SM, "SingleMode");
ql_dbg(ql_dbg_init, vha, 0x0160,
"SFP Media: %s\n", str);
/* link length */
memset(str, 0, STR_LEN);
ptr = str;
leftover = STR_LEN;
p = len = 0;
PRINT_FIELD(fc_ll_cc7, FC_LL_VL, "Very Long");
PRINT_FIELD(fc_ll_cc7, FC_LL_S, "Short");
PRINT_FIELD(fc_ll_cc7, FC_LL_I, "Intermediate");
PRINT_FIELD(fc_ll_cc7, FC_LL_L, "Long");
PRINT_FIELD(fc_ll_cc7, FC_LL_M, "Medium");
ql_dbg(ql_dbg_init, vha, 0x0196,
"SFP Link Length: %s\n", str);
memset(str, 0, STR_LEN);
ptr = str;
leftover = STR_LEN;
p = len = 0;
PRINT_FIELD(fc_ll_cc7, FC_LL_SA, "Short Wave (SA)");
PRINT_FIELD(fc_ll_cc7, FC_LL_LC, "Long Wave(LC)");
PRINT_FIELD(fc_tec_cc8, FC_TEC_SN, "Short Wave (SN)");
PRINT_FIELD(fc_tec_cc8, FC_TEC_SL, "Short Wave (SL)");
PRINT_FIELD(fc_tec_cc8, FC_TEC_LL, "Long Wave (LL)");
ql_dbg(ql_dbg_init, vha, 0x016e,
"SFP FC Link Tech: %s\n", str);
if (a0->length_km)
ql_dbg(ql_dbg_init, vha, 0x016f,
"SFP Distant: %d km\n", a0->length_km);
if (a0->length_100m)
ql_dbg(ql_dbg_init, vha, 0x0170,
"SFP Distant: %d m\n", a0->length_100m*100);
if (a0->length_50um_10m)
ql_dbg(ql_dbg_init, vha, 0x0189,
"SFP Distant (WL=50um): %d m\n", a0->length_50um_10m * 10);
if (a0->length_62um_10m)
ql_dbg(ql_dbg_init, vha, 0x018a,
"SFP Distant (WL=62.5um): %d m\n", a0->length_62um_10m * 10);
if (a0->length_om4_10m)
ql_dbg(ql_dbg_init, vha, 0x0194,
"SFP Distant (OM4): %d m\n", a0->length_om4_10m * 10);
if (a0->length_om3_10m)
ql_dbg(ql_dbg_init, vha, 0x0195,
"SFP Distant (OM3): %d m\n", a0->length_om3_10m * 10);
}
/*
* Return Code:
* QLA_SUCCESS: no action
* QLA_INTERFACE_ERROR: SFP is not there.
* QLA_FUNCTION_FAILED: detected New SFP
*/
int
qla24xx_detect_sfp(scsi_qla_host_t *vha)
{
int rc = QLA_SUCCESS;
struct sff_8247_a0 *a;
struct qla_hw_data *ha = vha->hw;
if (!AUTO_DETECT_SFP_SUPPORT(vha))
goto out;
rc = qla2x00_read_sfp_dev(vha, NULL, 0);
if (rc)
goto out;
a = (struct sff_8247_a0 *)vha->hw->sfp_data;
qla2xxx_print_sfp_info(vha);
if (a->fc_ll_cc7 & FC_LL_VL || a->fc_ll_cc7 & FC_LL_L) {
/* long range */
ha->flags.detected_lr_sfp = 1;
if (a->length_km > 5 || a->length_100m > 50)
ha->long_range_distance = LR_DISTANCE_10K;
else
ha->long_range_distance = LR_DISTANCE_5K;
if (ha->flags.detected_lr_sfp != ha->flags.using_lr_setting)
ql_dbg(ql_dbg_async, vha, 0x507b,
"Detected Long Range SFP.\n");
} else {
/* short range */
ha->flags.detected_lr_sfp = 0;
if (ha->flags.using_lr_setting)
ql_dbg(ql_dbg_async, vha, 0x5084,
"Detected Short Range SFP.\n");
}
if (!vha->flags.init_done)
rc = QLA_SUCCESS;
out:
return rc;
}
/**
* qla2x00_setup_chip() - Load and start RISC firmware.
* @ha: HA context
......@@ -2879,6 +3020,8 @@ qla2x00_setup_chip(scsi_qla_host_t *vha)
rval = qla2x00_execute_fw(vha, srisc_address);
/* Retrieve firmware information. */
if (rval == QLA_SUCCESS) {
qla24xx_detect_sfp(vha);
rval = qla2x00_set_exlogins_buffer(vha);
if (rval != QLA_SUCCESS)
goto failed;
......
......@@ -799,6 +799,11 @@ qla2x00_async_event(scsi_qla_host_t *vha, struct rsp_que *rsp, uint16_t *mb)
vha->flags.management_server_logged_in = 0;
qla2x00_post_aen_work(vha, FCH_EVT_LINKUP, ha->link_data_rate);
if (AUTO_DETECT_SFP_SUPPORT(vha)) {
set_bit(DETECT_SFP_CHANGE, &vha->dpc_flags);
qla2xxx_wake_dpc(vha);
}
break;
case MBA_LOOP_DOWN: /* Loop Down Event */
......
......@@ -57,6 +57,7 @@ static struct rom_cmd {
{ MBC_INITIALIZE_MULTIQ },
{ MBC_IOCB_COMMAND_A64 },
{ MBC_GET_ADAPTER_LOOP_ID },
{ MBC_READ_SFP },
};
static int is_rom_cmd(uint16_t cmd)
......@@ -598,13 +599,29 @@ qla2x00_execute_fw(scsi_qla_host_t *vha, uint32_t risc_addr)
mcp->mb[1] = MSW(risc_addr);
mcp->mb[2] = LSW(risc_addr);
mcp->mb[3] = 0;
mcp->mb[4] = 0;
if (IS_QLA25XX(ha) || IS_QLA81XX(ha) || IS_QLA83XX(ha) ||
IS_QLA27XX(ha)) {
if (ql2xautodetectsfp) {
if (ha->flags.detected_lr_sfp) {
mcp->mb[4] |= EXTENDED_BB_CREDITS;
if (IS_QLA27XX(ha))
mcp->mb[4] |=
(u16)ha->long_range_distance << 12;
ha->flags.using_lr_setting = 1;
}
} else {
struct nvram_81xx *nv = ha->nvram;
mcp->mb[4] = (nv->enhanced_features &
EXTENDED_BB_CREDITS);
} else
mcp->mb[4] = 0;
if (nv->enhanced_features &
EXTENDED_BB_CREDITS) {
mcp->mb[4] |= EXTENDED_BB_CREDITS;
ha->flags.using_lr_setting = 1;
}
}
} else {
ha->flags.using_lr_setting = 0;
}
if (ql2xnvmeenable && IS_QLA27XX(ha))
mcp->mb[4] |= NVME_ENABLE_FLAG;
......@@ -4585,6 +4602,10 @@ qla2x00_read_sfp(scsi_qla_host_t *vha, dma_addr_t sfp_dma, uint8_t *sfp,
if (rval != QLA_SUCCESS) {
ql_dbg(ql_dbg_mbx, vha, 0x10e9,
"Failed=%x mb[0]=%x.\n", rval, mcp->mb[0]);
if (mcp->mb[0] == MBS_COMMAND_ERROR &&
mcp->mb[1] == 0x22)
/* sfp is not there */
rval = QLA_INTERFACE_ERROR;
} else {
ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x10ea,
"Done %s.\n", __func__);
......@@ -6133,3 +6154,55 @@ int qla27xx_get_zio_threshold(scsi_qla_host_t *vha, uint16_t *value)
return rval;
}
int
qla2x00_read_sfp_dev(struct scsi_qla_host *vha, char *buf, int count)
{
struct qla_hw_data *ha = vha->hw;
uint16_t iter, addr, offset;
dma_addr_t phys_addr;
int rval, c;
u8 *sfp_data;
memset(ha->sfp_data, 0, SFP_DEV_SIZE);
addr = 0xa0;
phys_addr = ha->sfp_data_dma;
sfp_data = ha->sfp_data;
offset = c = 0;
for (iter = 0; iter < SFP_DEV_SIZE / SFP_BLOCK_SIZE; iter++) {
if (iter == 4) {
/* Skip to next device address. */
addr = 0xa2;
offset = 0;
}
rval = qla2x00_read_sfp(vha, phys_addr, sfp_data,
addr, offset, SFP_BLOCK_SIZE, BIT_1);
if (rval != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0x706d,
"Unable to read SFP data (%x/%x/%x).\n", rval,
addr, offset);
return rval;
}
if (buf && (c < count)) {
u16 sz;
if ((count - c) >= SFP_BLOCK_SIZE)
sz = SFP_BLOCK_SIZE;
else
sz = count - c;
memcpy(buf, sfp_data, sz);
buf += SFP_BLOCK_SIZE;
c += sz;
}
phys_addr += SFP_BLOCK_SIZE;
sfp_data += SFP_BLOCK_SIZE;
offset += SFP_BLOCK_SIZE;
}
return rval;
}
......@@ -262,6 +262,12 @@ MODULE_PARM_DESC(ql2xmvasynctoatio,
"0 (Default). Do not move IOCBs"
"1 - Move IOCBs.");
int ql2xautodetectsfp = 1;
module_param(ql2xautodetectsfp, int, 0444);
MODULE_PARM_DESC(ql2xautodetectsfp,
"Detect SFP range and set appropriate distance.\n"
"1 (Default): Enable\n");
/*
* SCSI host template entry points
*/
......@@ -3330,6 +3336,13 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
if (test_bit(UNLOADING, &base_vha->dpc_flags))
return -ENODEV;
if (ha->flags.detected_lr_sfp) {
ql_log(ql_log_info, base_vha, 0xffff,
"Reset chip to pick up LR SFP setting\n");
set_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags);
qla2xxx_wake_dpc(base_vha);
}
return 0;
probe_init_failed:
......@@ -4019,8 +4032,18 @@ qla2x00_mem_alloc(struct qla_hw_data *ha, uint16_t req_len, uint16_t rsp_len,
"loop_id_map=%p.\n", ha->loop_id_map);
}
ha->sfp_data = dma_alloc_coherent(&ha->pdev->dev,
SFP_DEV_SIZE, &ha->sfp_data_dma, GFP_KERNEL);
if (!ha->sfp_data) {
ql_dbg_pci(ql_dbg_init, ha->pdev, 0x011b,
"Unable to allocate memory for SFP read-data.\n");
goto fail_sfp_data;
}
return 0;
fail_sfp_data:
kfree(ha->loop_id_map);
fail_loop_id_map:
dma_pool_free(ha->s_dma_pool, ha->async_pd, ha->async_pd_dma);
fail_async_pd:
......@@ -4358,7 +4381,8 @@ qla2x00_mem_free(struct qla_hw_data *ha)
ha->ct_sns, ha->ct_sns_dma);
if (ha->sfp_data)
dma_pool_free(ha->s_dma_pool, ha->sfp_data, ha->sfp_data_dma);
dma_free_coherent(&ha->pdev->dev, SFP_DEV_SIZE, ha->sfp_data,
ha->sfp_data_dma);
if (ha->ms_iocb)
dma_pool_free(ha->s_dma_pool, ha->ms_iocb, ha->ms_iocb_dma);
......@@ -5707,6 +5731,16 @@ qla2x00_do_dpc(void *data)
}
}
if (test_and_clear_bit(DETECT_SFP_CHANGE,
&base_vha->dpc_flags) &&
!test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags)) {
qla24xx_detect_sfp(base_vha);
if (ha->flags.detected_lr_sfp !=
ha->flags.using_lr_setting)
set_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags);
}
if (test_and_clear_bit(ISP_ABORT_NEEDED,
&base_vha->dpc_flags)) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment