diff --git a/Documentation/hwmon/da9055 b/Documentation/hwmon/da9055
new file mode 100644
index 0000000000000000000000000000000000000000..855c3f536e00f80683426c595bb7dd860c1bc553
--- /dev/null
+++ b/Documentation/hwmon/da9055
@@ -0,0 +1,47 @@
+Supported chips:
+  * Dialog Semiconductors DA9055 PMIC
+    Prefix: 'da9055'
+    Datasheet: Datasheet is not publicly available.
+
+Authors: David Dajun Chen <dchen@diasemi.com>
+
+Description
+-----------
+
+The DA9055 provides an Analogue to Digital Converter (ADC) with 10 bits
+resolution and track and hold circuitry combined with an analogue input
+multiplexer. The analogue input multiplexer will allow conversion of up to 5
+different inputs. The track and hold circuit ensures stable input voltages at
+the input of the ADC during the conversion.
+
+The ADC is used to measure the following inputs:
+Channel 0: VDDOUT - measurement of the system voltage
+Channel 1: ADC_IN1 - high impedance input (0 - 2.5V)
+Channel 2: ADC_IN2 - high impedance input (0 - 2.5V)
+Channel 3: ADC_IN3 - high impedance input (0 - 2.5V)
+Channel 4: Internal Tjunc. - sense (internal temp. sensor)
+
+By using sysfs attributes we can measure the system voltage VDDOUT,
+chip junction temperature and auxiliary channels voltages.
+
+Voltage Monitoring
+------------------
+
+Voltages are sampled in a AUTO mode it can be manually sampled too and results
+are stored in a 10 bit ADC.
+
+The system voltage is calculated as:
+	Milli volt = ((ADC value * 1000) / 85) + 2500
+
+The voltages on ADC channels 1, 2 and 3 are calculated as:
+	Milli volt = (ADC value * 1000) / 102
+
+Temperature Monitoring
+----------------------
+
+Temperatures are sampled by a 10 bit ADC.  Junction temperatures
+are monitored by the ADC channels.
+
+The junction temperature is calculated:
+	Degrees celsius = -0.4084 * (ADC_RES - T_OFFSET) + 307.6332
+The junction temperature attribute is supported by the driver.
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 42f21ad56276cdd6972d5e05f3cb39cbed157c09..4800d4c2a7b7fc8c7634039dfbd52ee5c4232ae5 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -334,6 +334,16 @@ config SENSORS_DA9052_ADC
 	  This driver can also be built as module. If so, the module
 	  will be called da9052-hwmon.
 
+config SENSORS_DA9055
+	tristate "Dialog Semiconductor DA9055 ADC"
+	depends on MFD_DA9055
+	help
+	  If you say yes here you get support for ADC on the Dialog
+	  Semiconductor DA9055 PMIC.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called da9055-hwmon.
+
 config SENSORS_I5K_AMB
 	tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
 	depends on PCI
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 8d5fcb5e8e9f479438cfb3e6927906e0abd214cf..a930f0997d25a7fe4c69ad5fa10bc1a9c42ca5cb 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -44,6 +44,7 @@ obj-$(CONFIG_SENSORS_ASC7621)	+= asc7621.o
 obj-$(CONFIG_SENSORS_ATXP1)	+= atxp1.o
 obj-$(CONFIG_SENSORS_CORETEMP)	+= coretemp.o
 obj-$(CONFIG_SENSORS_DA9052_ADC)+= da9052-hwmon.o
+obj-$(CONFIG_SENSORS_DA9055)+= da9055-hwmon.o
 obj-$(CONFIG_SENSORS_DME1737)	+= dme1737.o
 obj-$(CONFIG_SENSORS_DS620)	+= ds620.o
 obj-$(CONFIG_SENSORS_DS1621)	+= ds1621.o
diff --git a/drivers/hwmon/da9055-hwmon.c b/drivers/hwmon/da9055-hwmon.c
new file mode 100644
index 0000000000000000000000000000000000000000..d32edaea86d5721f469794ea92dee10553d23709
--- /dev/null
+++ b/drivers/hwmon/da9055-hwmon.c
@@ -0,0 +1,336 @@
+/*
+ * HWMON Driver for Dialog DA9055
+ *
+ * Copyright(c) 2012 Dialog Semiconductor Ltd.
+ *
+ * Author: David Dajun Chen <dchen@diasemi.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/completion.h>
+
+#include <linux/mfd/da9055/core.h>
+#include <linux/mfd/da9055/reg.h>
+
+#define DA9055_ADCIN_DIV	102
+#define DA9055_VSYS_DIV	85
+
+#define DA9055_ADC_VSYS	0
+#define DA9055_ADC_ADCIN1	1
+#define DA9055_ADC_ADCIN2	2
+#define DA9055_ADC_ADCIN3	3
+#define DA9055_ADC_TJUNC	4
+
+struct da9055_hwmon {
+	struct da9055	*da9055;
+	struct device	*class_device;
+	struct mutex	hwmon_lock;
+	struct mutex	irq_lock;
+	struct completion done;
+};
+
+static const char * const input_names[] = {
+	[DA9055_ADC_VSYS]	= "VSYS",
+	[DA9055_ADC_ADCIN1]	= "ADC IN1",
+	[DA9055_ADC_ADCIN2]	= "ADC IN2",
+	[DA9055_ADC_ADCIN3]	= "ADC IN3",
+	[DA9055_ADC_TJUNC]	= "CHIP TEMP",
+};
+
+static const u8 chan_mux[DA9055_ADC_TJUNC + 1] = {
+	[DA9055_ADC_VSYS]	= DA9055_ADC_MUX_VSYS,
+	[DA9055_ADC_ADCIN1]	= DA9055_ADC_MUX_ADCIN1,
+	[DA9055_ADC_ADCIN2]	= DA9055_ADC_MUX_ADCIN2,
+	[DA9055_ADC_ADCIN3]	= DA9055_ADC_MUX_ADCIN1,
+	[DA9055_ADC_TJUNC]	= DA9055_ADC_MUX_T_SENSE,
+};
+
+static int da9055_adc_manual_read(struct da9055_hwmon *hwmon,
+					unsigned char channel)
+{
+	int ret;
+	unsigned short calc_data;
+	unsigned short data;
+	unsigned char mux_sel;
+	struct da9055 *da9055 = hwmon->da9055;
+
+	if (channel > DA9055_ADC_TJUNC)
+		return -EINVAL;
+
+	mutex_lock(&hwmon->irq_lock);
+
+	/* Selects desired MUX for manual conversion */
+	mux_sel = chan_mux[channel] | DA9055_ADC_MAN_CONV;
+
+	ret = da9055_reg_write(da9055, DA9055_REG_ADC_MAN, mux_sel);
+	if (ret < 0)
+		goto err;
+
+	/* Wait for an interrupt */
+	if (!wait_for_completion_timeout(&hwmon->done,
+					msecs_to_jiffies(500))) {
+		dev_err(da9055->dev,
+			"timeout waiting for ADC conversion interrupt\n");
+		ret = -ETIMEDOUT;
+		goto err;
+	}
+
+	ret = da9055_reg_read(da9055, DA9055_REG_ADC_RES_H);
+	if (ret < 0)
+		goto err;
+
+	calc_data = (unsigned short)ret;
+	data = calc_data << 2;
+
+	ret = da9055_reg_read(da9055, DA9055_REG_ADC_RES_L);
+	if (ret < 0)
+		goto err;
+
+	calc_data = (unsigned short)(ret & DA9055_ADC_LSB_MASK);
+	data |= calc_data;
+
+	ret = data;
+
+err:
+	mutex_unlock(&hwmon->irq_lock);
+	return ret;
+}
+
+static irqreturn_t da9055_auxadc_irq(int irq, void *irq_data)
+{
+	struct da9055_hwmon *hwmon = irq_data;
+
+	complete(&hwmon->done);
+
+	return IRQ_HANDLED;
+}
+
+/* Conversion function for VSYS and ADCINx */
+static inline int volt_reg_to_mV(int value, int channel)
+{
+	if (channel == DA9055_ADC_VSYS)
+		return DIV_ROUND_CLOSEST(value * 1000, DA9055_VSYS_DIV) + 2500;
+	else
+		return DIV_ROUND_CLOSEST(value * 1000, DA9055_ADCIN_DIV);
+}
+
+static int da9055_enable_auto_mode(struct da9055 *da9055, int channel)
+{
+
+	return da9055_reg_update(da9055, DA9055_REG_ADC_CONT, 1 << channel,
+				1 << channel);
+
+}
+
+static int da9055_disable_auto_mode(struct da9055 *da9055, int channel)
+{
+
+	return da9055_reg_update(da9055, DA9055_REG_ADC_CONT, 1 << channel, 0);
+}
+
+static ssize_t da9055_read_auto_ch(struct device *dev,
+				struct device_attribute *devattr, char *buf)
+{
+	struct da9055_hwmon *hwmon = dev_get_drvdata(dev);
+	int ret, adc;
+	int channel = to_sensor_dev_attr(devattr)->index;
+
+	mutex_lock(&hwmon->hwmon_lock);
+
+	ret = da9055_enable_auto_mode(hwmon->da9055, channel);
+	if (ret < 0)
+		goto hwmon_err;
+
+	usleep_range(10000, 10500);
+
+	adc = da9055_reg_read(hwmon->da9055, DA9055_REG_VSYS_RES + channel);
+	if (adc < 0) {
+		ret = adc;
+		goto hwmon_err_release;
+	}
+
+	ret = da9055_disable_auto_mode(hwmon->da9055, channel);
+	if (ret < 0)
+		goto hwmon_err;
+
+	mutex_unlock(&hwmon->hwmon_lock);
+
+	return sprintf(buf, "%d\n", volt_reg_to_mV(adc, channel));
+
+hwmon_err_release:
+	da9055_disable_auto_mode(hwmon->da9055, channel);
+hwmon_err:
+	mutex_unlock(&hwmon->hwmon_lock);
+	return ret;
+}
+
+static ssize_t da9055_read_tjunc(struct device *dev,
+				 struct device_attribute *devattr, char *buf)
+{
+	struct da9055_hwmon *hwmon = dev_get_drvdata(dev);
+	int tjunc;
+	int toffset;
+
+	tjunc = da9055_adc_manual_read(hwmon, DA9055_ADC_TJUNC);
+	if (tjunc < 0)
+		return tjunc;
+
+	toffset = da9055_reg_read(hwmon->da9055, DA9055_REG_T_OFFSET);
+	if (toffset < 0)
+		return toffset;
+
+	/*
+	 * Degrees celsius = -0.4084 * (ADC_RES - T_OFFSET) + 307.6332
+	 * T_OFFSET is a trim value used to improve accuracy of the result
+	 */
+	return sprintf(buf, "%d\n", DIV_ROUND_CLOSEST(-4084 * (tjunc - toffset)
+							+ 3076332, 10000));
+}
+
+static ssize_t da9055_hwmon_show_name(struct device *dev,
+				      struct device_attribute *devattr,
+				      char *buf)
+{
+	return sprintf(buf, "da9055-hwmon\n");
+}
+
+static ssize_t show_label(struct device *dev,
+			  struct device_attribute *devattr, char *buf)
+{
+	return sprintf(buf, "%s\n",
+		       input_names[to_sensor_dev_attr(devattr)->index]);
+}
+
+static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, da9055_read_auto_ch, NULL,
+			  DA9055_ADC_VSYS);
+static SENSOR_DEVICE_ATTR(in0_label, S_IRUGO, show_label, NULL,
+			  DA9055_ADC_VSYS);
+static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, da9055_read_auto_ch, NULL,
+			  DA9055_ADC_ADCIN1);
+static SENSOR_DEVICE_ATTR(in1_label, S_IRUGO, show_label, NULL,
+			  DA9055_ADC_ADCIN1);
+static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, da9055_read_auto_ch, NULL,
+			  DA9055_ADC_ADCIN2);
+static SENSOR_DEVICE_ATTR(in2_label, S_IRUGO, show_label, NULL,
+			  DA9055_ADC_ADCIN2);
+static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, da9055_read_auto_ch, NULL,
+			  DA9055_ADC_ADCIN3);
+static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_label, NULL,
+			  DA9055_ADC_ADCIN3);
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, da9055_read_tjunc, NULL,
+			  DA9055_ADC_TJUNC);
+static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_label, NULL,
+			  DA9055_ADC_TJUNC);
+
+static DEVICE_ATTR(name, S_IRUGO, da9055_hwmon_show_name, NULL);
+
+static struct attribute *da9055_attr[] = {
+	&dev_attr_name.attr,
+	&sensor_dev_attr_in0_input.dev_attr.attr,
+	&sensor_dev_attr_in0_label.dev_attr.attr,
+	&sensor_dev_attr_in1_input.dev_attr.attr,
+	&sensor_dev_attr_in1_label.dev_attr.attr,
+	&sensor_dev_attr_in2_input.dev_attr.attr,
+	&sensor_dev_attr_in2_label.dev_attr.attr,
+	&sensor_dev_attr_in3_input.dev_attr.attr,
+	&sensor_dev_attr_in3_label.dev_attr.attr,
+
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_label.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group da9055_attr_group = {.attrs = da9055_attr};
+
+static int da9055_hwmon_probe(struct platform_device *pdev)
+{
+	struct da9055_hwmon *hwmon;
+	int hwmon_irq, ret;
+
+	hwmon = devm_kzalloc(&pdev->dev, sizeof(struct da9055_hwmon),
+			     GFP_KERNEL);
+	if (!hwmon)
+		return -ENOMEM;
+
+	mutex_init(&hwmon->hwmon_lock);
+	mutex_init(&hwmon->irq_lock);
+
+	init_completion(&hwmon->done);
+	hwmon->da9055 = dev_get_drvdata(pdev->dev.parent);
+
+	platform_set_drvdata(pdev, hwmon);
+
+	hwmon_irq = platform_get_irq_byname(pdev, "HWMON");
+	if (hwmon_irq < 0)
+		return hwmon_irq;
+
+	hwmon_irq = regmap_irq_get_virq(hwmon->da9055->irq_data, hwmon_irq);
+	if (hwmon_irq < 0)
+		return hwmon_irq;
+
+	ret = devm_request_threaded_irq(&pdev->dev, hwmon_irq,
+					NULL, da9055_auxadc_irq,
+					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+					"adc-irq", hwmon);
+	if (ret != 0) {
+		dev_err(hwmon->da9055->dev, "DA9055 ADC IRQ failed ret=%d\n",
+			ret);
+		return ret;
+	}
+
+	ret = sysfs_create_group(&pdev->dev.kobj, &da9055_attr_group);
+	if (ret)
+		return ret;
+
+	hwmon->class_device = hwmon_device_register(&pdev->dev);
+	if (IS_ERR(hwmon->class_device)) {
+		ret = PTR_ERR(hwmon->class_device);
+		goto err;
+	}
+
+	return 0;
+
+err:
+	sysfs_remove_group(&pdev->dev.kobj, &da9055_attr_group);
+	return ret;
+}
+
+static int da9055_hwmon_remove(struct platform_device *pdev)
+{
+	struct da9055_hwmon *hwmon = platform_get_drvdata(pdev);
+
+	sysfs_remove_group(&pdev->dev.kobj, &da9055_attr_group);
+	hwmon_device_unregister(hwmon->class_device);
+
+	return 0;
+}
+
+static struct platform_driver da9055_hwmon_driver = {
+	.probe = da9055_hwmon_probe,
+	.remove = da9055_hwmon_remove,
+	.driver = {
+		.name = "da9055-hwmon",
+		.owner = THIS_MODULE,
+	},
+};
+
+module_platform_driver(da9055_hwmon_driver);
+
+MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
+MODULE_DESCRIPTION("DA9055 HWMON driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da9055-hwmon");