Skip to content

L
linux
Commit e60193f2 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge bk://linuxusb.bkbits.net/dir_move-2.5 

into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux
parents 0637845a c0e2f2f1
Show whitespace changes
Inline Side-by-side
Showing with 586 additions and 316 deletions
drivers/usb/Config.help
View file @ e60193f2
......@@ -37,60 +37,6 @@ CONFIG_USB_LONG_TIMEOUT
If you have an MGE Ellipse UPS, or you see timeouts in HID
transactions, say Y; otherwise say N.
CONFIG_USB_UHCI
The Universal Host Controller Interface is a standard by Intel for
accessing the USB hardware in the PC (which is also called the USB
host controller). If your USB host controller conforms to this
standard, you may want to say Y, but see below. All recent boards
with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX,
i810, i820) conform to this standard. Also all VIA PCI chipsets
(like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro
133).
Currently there exist two drivers for UHCI host controllers: this
one and the so-called JE driver, which you can get from
"UHCI alternate (JE) support", below. You need only one.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called usb-uhci.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
CONFIG_USB_UHCI_ALT
The Universal Host Controller Interface is a standard by Intel for
accessing the USB hardware in the PC (which is also called the USB
host controller). If your USB host controller conforms to this
standard, you may want to say Y, but see below. All recent boards
with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX,
i810, i820) conform to this standard. Also all VIA PCI chipsets
(like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro
133). If unsure, say Y.
Currently there exist two drivers for UHCI host controllers: this
so-called JE driver, and the one you get from "UHCI support", above.
You need only one.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called uhci.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
CONFIG_USB_OHCI
The Open Host Controller Interface is a standard by
Compaq/Microsoft/National for accessing the USB PC hardware (also
called USB host controller). If your USB host controller conforms to
this standard, say Y. The USB host controllers on most non-Intel
architectures and on several x86 compatibles with non-Intel chipsets
-- like SiS (aktual 610, 610 and so on) or ALi (ALi IV, ALi V,
Aladdin Pro..) -- conform to this standard.
You may want to read <file:Documentation/usb/ohci.txt>.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called usb-ohci.o. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
CONFIG_USB_HID
Say Y here if you want full HID support to connect keyboards,
mice, joysticks, graphic tablets, or any other HID based devices
......@@ -445,32 +391,6 @@ CONFIG_USB_MDC800
The module will be called mdc800.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
CONFIG_USB_STORAGE
Say Y here if you want to connect USB mass storage devices to your
computer's USB port.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called usb-storage.o. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
CONFIG_USB_STORAGE_DEBUG
Say Y here in order to have the USB Mass Storage code generate
verbose debugging messages.
CONFIG_USB_STORAGE_ISD200
Say Y here if you want to use USB Mass Store devices based
on the In-Systems Design ISD-200 USB/ATA bridge.
Some of the products that use this chip are:
- Archos Jukebox 6000
- ISD SmartCable for Storage
- Taiwan Skymaster CD530U/DEL-0241 IDE bridge
- Sony CRX10U CD-R/RW drive
- CyQ've CQ8060A CDRW drive
- Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
CONFIG_USB_USS720
This driver is for USB parallel port adapters that use the Lucent
Technologies USS-720 chip. These cables are plugged into your USB
......@@ -576,19 +496,6 @@ CONFIG_USB_USBNET
The module will be called usbnet.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
CONFIG_USB_STORAGE_FREECOM
Support for the Freecom USB to IDE/ATAPI adaptor.
Freecom has a web page at <http://www.freecom.de/>.
CONFIG_USB_STORAGE_DPCM
Say Y here to support the Microtech ZiO! CompactFlash/SmartMedia
reader, details at <http://www.microtechint.com/zio/index.html>.
This driver treats the flash card as a removable storage device.
CONFIG_USB_STORAGE_SDDR09
Say Y here to include additional code to support the Sandisk SDDR-09
SmartMedia reader in the USB Mass Storage driver.
CONFIG_USB_RIO500
Say Y here if you want to connect a USB Rio500 mp3 player to your
computer's USB port. Please read <file:Documentation/usb/rio.txt>
......
drivers/usb/Config.in
View file @ e60193f2
......@@ -6,104 +6,41 @@ comment 'USB support'
dep_tristate 'Support for USB' CONFIG_USB $CONFIG_PCI
if [ "$CONFIG_USB" = "y" -o "$CONFIG_USB" = "m" ]; then
bool ' USB verbose debug messages' CONFIG_USB_DEBUG
source drivers/usb/core/Config.in
comment 'Miscellaneous USB options'
bool ' USB device filesystem' CONFIG_USB_DEVICEFS
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
bool ' Enforce USB bandwidth allocation (EXPERIMENTAL)' CONFIG_USB_BANDWIDTH
else
define_bool CONFIG_USB_BANDWIDTH n
fi
bool ' Long timeout for slow-responding devices (some MGE Ellipse UPSes)' CONFIG_USB_LONG_TIMEOUT
source drivers/usb/host/Config.in
comment 'USB Host Controller Drivers'
source drivers/usb/hcd/Config.in
if [ "$CONFIG_USB_UHCI_ALT" != "y" ]; then
dep_tristate ' UHCI (Intel PIIX4, VIA, ...) support' CONFIG_USB_UHCI $CONFIG_USB
fi
if [ "$CONFIG_USB_UHCI" != "y" ]; then
dep_tristate ' UHCI Alternate Driver (JE) support' CONFIG_USB_UHCI_ALT $CONFIG_USB
else
define_bool CONFIG_USB_UHCI_ALT n
fi
dep_tristate ' OHCI (Compaq, iMacs, OPTi, SiS, ALi, ...) support' CONFIG_USB_OHCI $CONFIG_USB
comment 'USB Device Class drivers'
dep_tristate ' USB Audio support' CONFIG_USB_AUDIO $CONFIG_USB $CONFIG_SOUND
dep_tristate ' EMI 2|6 USB Audio interface support' CONFIG_USB_EMI26 $CONFIG_USB_AUDIO
dep_tristate ' USB Bluetooth support (EXPERIMENTAL)' CONFIG_USB_BLUETOOTH $CONFIG_USB $CONFIG_EXPERIMENTAL
if [ "$CONFIG_SCSI" = "n" ]; then
comment ' SCSI support is needed for USB Storage'
fi
dep_tristate ' USB Mass Storage support' CONFIG_USB_STORAGE $CONFIG_USB $CONFIG_SCSI
dep_mbool ' USB Mass Storage verbose debug' CONFIG_USB_STORAGE_DEBUG $CONFIG_USB_STORAGE
dep_mbool ' Datafab MDCFE-B Compact Flash Reader support' CONFIG_USB_STORAGE_DATAFAB $CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
dep_mbool ' Freecom USB/ATAPI Bridge support' CONFIG_USB_STORAGE_FREECOM $CONFIG_USB_STORAGE
dep_mbool ' ISD-200 USB/ATA Bridge support' CONFIG_USB_STORAGE_ISD200 $CONFIG_USB_STORAGE
dep_mbool ' Microtech CompactFlash/SmartMedia support' CONFIG_USB_STORAGE_DPCM $CONFIG_USB_STORAGE
dep_mbool ' HP CD-Writer 82xx support' CONFIG_USB_STORAGE_HP8200e $CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
dep_mbool ' SanDisk SDDR-09 (and other SmartMedia) support' CONFIG_USB_STORAGE_SDDR09 $CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
dep_mbool ' Lexar Jumpshot Compact Flash Reader' CONFIG_USB_STORAGE_JUMPSHOT $CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
dep_tristate ' USB Modem (CDC ACM) support' CONFIG_USB_ACM $CONFIG_USB
dep_tristate ' USB Printer support' CONFIG_USB_PRINTER $CONFIG_USB
source drivers/usb/class/Config.in
comment 'USB Human Interface Devices (HID)'
dep_tristate ' USB Human Interface Device (full HID) support' CONFIG_USB_HID $CONFIG_USB
if [ "$CONFIG_INPUT" = "n" ]; then
comment ' Input core support is needed for USB HID input layer or HIDBP support'
fi
dep_mbool ' HID input layer support' CONFIG_USB_HIDINPUT $CONFIG_INPUT $CONFIG_USB_HID
dep_mbool ' /dev/hiddev raw HID device support' CONFIG_USB_HIDDEV $CONFIG_USB_HID
source drivers/usb/storage/Config.in
if [ "$CONFIG_USB_HID" != "y" ]; then
dep_tristate ' USB HIDBP Keyboard (basic) support' CONFIG_USB_KBD $CONFIG_USB $CONFIG_INPUT
dep_tristate ' USB HIDBP Mouse (basic) support' CONFIG_USB_MOUSE $CONFIG_USB $CONFIG_INPUT
fi
dep_tristate ' Wacom Intuos/Graphire tablet support' CONFIG_USB_WACOM $CONFIG_USB $CONFIG_INPUT
source drivers/usb/input/Config.in
comment 'USB Imaging devices'
dep_tristate ' USB Kodak DC-2xx Camera support' CONFIG_USB_DC2XX $CONFIG_USB
dep_tristate ' USB Mustek MDC800 Digital Camera support (EXPERIMENTAL)' CONFIG_USB_MDC800 $CONFIG_USB $CONFIG_EXPERIMENTAL
dep_tristate ' USB Scanner support' CONFIG_USB_SCANNER $CONFIG_USB
dep_tristate ' Microtek X6USB scanner support' CONFIG_USB_MICROTEK $CONFIG_USB $CONFIG_SCSI
dep_tristate ' HP53xx USB scanner support (EXPERIMENTAL)' CONFIG_USB_HPUSBSCSI $CONFIG_USB $CONFIG_SCSI $CONFIG_EXPERIMENTAL
source drivers/usb/image/Config.in
comment 'USB Multimedia devices'
if [ "$CONFIG_VIDEO_DEV" = "n" ]; then
comment ' Video4Linux support is needed for USB Multimedia device support'
else
dep_tristate ' USB IBM (Xirlink) C-it Camera support' CONFIG_USB_IBMCAM $CONFIG_USB $CONFIG_VIDEO_DEV
dep_tristate ' USB OV511 Camera support' CONFIG_USB_OV511 $CONFIG_USB $CONFIG_VIDEO_DEV
dep_tristate ' USB Philips Cameras' CONFIG_USB_PWC $CONFIG_USB $CONFIG_VIDEO_DEV
dep_tristate ' USB SE401 Camera support' CONFIG_USB_SE401 $CONFIG_USB $CONFIG_VIDEO_DEV
dep_tristate ' USB STV680 (Pencam) Camera support' CONFIG_USB_STV680 $CONFIG_USB $CONFIG_VIDEO_DEV
dep_tristate ' USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)' CONFIG_USB_VICAM $CONFIG_USB $CONFIG_VIDEO_DEV $CONFIG_EXPERIMENTAL
dep_tristate ' D-Link USB FM radio support (EXPERIMENTAL)' CONFIG_USB_DSBR $CONFIG_USB $CONFIG_VIDEO_DEV $CONFIG_EXPERIMENTAL
dep_tristate ' DABUSB driver' CONFIG_USB_DABUSB $CONFIG_USB
dep_tristate ' USB Konica Webcam support' CONFIG_USB_KONICAWC $CONFIG_USB $CONFIG_VIDEO_DEV
fi
source drivers/usb/media/Config.in
comment 'USB Network adaptors'
if [ "$CONFIG_NET" = "n" ]; then
comment ' Networking support is needed for USB Networking device support'
else
dep_tristate ' USB Pegasus/Pegasus-II based ethernet device support (EXPERIMENTAL)' CONFIG_USB_PEGASUS $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
dep_tristate ' USB RTL8150 based ethernet device support (EXPERIMENTAL)' CONFIG_USB_RTL8150 $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
dep_tristate ' USB KLSI KL5USB101-based ethernet device support (EXPERIMENTAL)' CONFIG_USB_KAWETH $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
dep_tristate ' USB CATC NetMate-based Ethernet device support (EXPERIMENTAL)' CONFIG_USB_CATC $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
dep_tristate ' USB Communication Class Ethernet device support (EXPERIMENTAL)' CONFIG_USB_CDCETHER $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
dep_tristate ' USB-to-USB Networking cable device support (EXPERIMENTAL)' CONFIG_USB_USBNET $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
fi
source drivers/usb/net/Config.in
comment 'USB port drivers'
dep_tristate ' USS720 parport driver' CONFIG_USB_USS720 $CONFIG_USB $CONFIG_PARPORT
source drivers/usb/serial/Config.in
comment 'USB Miscellaneous drivers'
dep_tristate ' USB Diamond Rio500 support (EXPERIMENTAL)' CONFIG_USB_RIO500 $CONFIG_USB $CONFIG_EXPERIMENTAL
dep_tristate ' USB Auerswald ISDN support (EXPERIMENTAL)' CONFIG_USB_AUERSWALD $CONFIG_USB $CONFIG_EXPERIMENTAL
dep_tristate ' EMI 2|6 USB Audio interface support' CONFIG_USB_EMI26 $CONFIG_USB_AUDIO
dep_tristate ' Texas Instruments Graph Link USB (aka SilverLink) cable support' CONFIG_USB_TIGL $CONFIG_USB
dep_tristate ' USB Auerswald ISDN support (EXPERIMENTAL)' CONFIG_USB_AUERSWALD $CONFIG_USB $CONFIG_EXPERIMENTAL
dep_tristate ' USB Diamond Rio500 support (EXPERIMENTAL)' CONFIG_USB_RIO500 $CONFIG_USB $CONFIG_EXPERIMENTAL
# Turn on CONFIG_USB_MISC if any of the drivers are compiled into the kernel
# to make our Makefile logic a bit simpler
if [ "$CONFIG_USB_USS720" = "y" -o "$CONFIG_USB_EMI26" = "y" -o "$CONFIG_USB_RIO500" = "y" ]; then
define_bool CONFIG_USB_MISC y
fi
if [ "$CONFIG_USB_AUERSWALD" = "y" -o "$CONFIG_USB_TIGL" = "y" ]; then
define_bool CONFIG_USB_MISC y
fi
fi
endmenu
drivers/usb/Makefile
View file @ e60193f2
......@@ -2,108 +2,90 @@
# Makefile for the kernel USB device drivers.
#
# The target object and module list name.
O_TARGET := usbdrv.o
# Objects that export symbols.
export-objs := usb.o hcd.o ov511.o pwc-uncompress.o
# Multipart objects.
usbcore-objs := usb.o usb-debug.o hub.o hcd.o
hid-objs := hid-core.o
pwc-objs := pwc-if.o pwc-misc.o pwc-ctrl.o pwc-uncompress.o
# Optional parts of multipart objects.
# Object files in subdirectories
mod-subdirs := core host class media net serial storage image misc input
ifeq ($(CONFIG_USB_DEVICEFS),y)
usbcore-objs += devio.o inode.o drivers.o devices.o
subdir-$(CONFIG_USB) += core
ifeq ($(CONFIG_USB),y)
obj-y += core/usb-core.o
endif
ifeq ($(CONFIG_USB_HIDDEV),y)
hid-objs += hiddev.o
subdir-$(CONFIG_USB_EHCI_HCD) += host
subdir-$(CONFIG_USB_OHCI_HCD) += host
subdir-$(CONFIG_USB_OHCI) += host
subdir-$(CONFIG_USB_UHCI_ALT) += host
subdir-$(CONFIG_USB_UHCI) += host
ifeq ($(CONFIG_USB_HOST),y)
obj-y += host/usb-host.o
endif
ifeq ($(CONFIG_USB_HIDINPUT),y)
hid-objs += hid-input.o
subdir-$(CONFIG_USB_ACM) += class
subdir-$(CONFIG_USB_AUDIO) += class
subdir-$(CONFIG_USB_BLUETOOTH) += class
subdir-$(CONFIG_USB_PRINTER) += class
ifeq ($(CONFIG_USB_CLASS),y)
obj-y += class/usb-class.o
endif
# Object file lists.
obj-y :=
obj-m :=
obj-n :=
obj- :=
# Each configuration option enables a list of files.
obj-$(CONFIG_USB) += usbcore.o
# EHCI needs to be linked before the other HCD drivers
ifeq ($(CONFIG_USB_EHCI_HCD),y)
obj-y += hcd/ehci-hcd.o
subdir-$(CONFIG_USB_STORAGE) += storage
ifeq ($(CONFIG_USB_STORAGE),y)
obj-y += storage/storage.o
endif
ifeq ($(CONFIG_USB_OHCI_HCD),y)
obj-y += hcd/ohci-hcd.o
subdir-$(CONFIG_USB_HID) += input
subdir-$(CONFIG_USB_KBD) += input
subdir-$(CONFIG_USB_MOUSE) += input
subdir-$(CONFIG_USB_WACOM) += input
ifeq ($(CONFIG_USB_INPUT),y)
obj-y += input/usb-input.o
endif
obj-$(CONFIG_USB_UHCI) += usb-uhci.o
obj-$(CONFIG_USB_UHCI_ALT) += uhci.o
obj-$(CONFIG_USB_OHCI) += usb-ohci.o
obj-$(CONFIG_USB_MOUSE) += usbmouse.o
obj-$(CONFIG_USB_HID) += hid.o
obj-$(CONFIG_USB_KBD) += usbkbd.o
obj-$(CONFIG_USB_WACOM) += wacom.o
subdir-$(CONFIG_USB_DABUSB) += media
subdir-$(CONFIG_USB_DSBR) += media
subdir-$(CONFIG_USB_IBMCAM) += media
subdir-$(CONFIG_USB_KONICAWC) += media
subdir-$(CONFIG_USB_OV511) += media
subdir-$(CONFIG_USB_PWC) += media
subdir-$(CONFIG_USB_SE401) += media
subdir-$(CONFIG_USB_STV680) += media
subdir-$(CONFIG_USB_VICAM) += media
ifeq ($(CONFIG_USB_MEDIA),y)
obj-y += media/usb-media.o
endif
obj-$(CONFIG_USB_SCANNER) += scanner.o
obj-$(CONFIG_USB_ACM) += acm.o
obj-$(CONFIG_USB_PRINTER) += printer.o
obj-$(CONFIG_USB_AUDIO) += audio.o
obj-$(CONFIG_USB_EMI26) += emi26.o
obj-$(CONFIG_USB_IBMCAM) += ibmcam.o usbvideo.o ultracam.o
obj-$(CONFIG_USB_KONICAWC) += konicawc.o usbvideo.o
obj-$(CONFIG_USB_PWC) += pwc.o
obj-$(CONFIG_USB_DC2XX) += dc2xx.o
obj-$(CONFIG_USB_MDC800) += mdc800.o
obj-$(CONFIG_USB_USS720) += uss720.o
obj-$(CONFIG_USB_DABUSB) += dabusb.o
obj-$(CONFIG_USB_VICAM) += vicam.o
obj-$(CONFIG_USB_OV511) += ov511.o
obj-$(CONFIG_USB_SE401) += se401.o
obj-$(CONFIG_USB_STV680) += stv680.o
obj-$(CONFIG_USB_PEGASUS) += pegasus.o
obj-$(CONFIG_USB_RTL8150) += rtl8150.o
obj-$(CONFIG_USB_CATC) += catc.o
obj-$(CONFIG_USB_KAWETH) += kaweth.o
obj-$(CONFIG_USB_CDCETHER) += CDCEther.o
obj-$(CONFIG_USB_RIO500) += rio500.o
obj-$(CONFIG_USB_DSBR) += dsbr100.o
obj-$(CONFIG_USB_MICROTEK) += microtek.o
obj-$(CONFIG_USB_HPUSBSCSI) += hpusbscsi.o
obj-$(CONFIG_USB_BLUETOOTH) += bluetooth.o
obj-$(CONFIG_USB_USBNET) += usbnet.o
obj-$(CONFIG_USB_AUERSWALD) += auerswald.o
obj-$(CONFIG_USB_TIGL) += tiglusb.o
subdir-$(CONFIG_USB_CATC) += net
subdir-$(CONFIG_USB_CDCETHER) += net
subdir-$(CONFIG_USB_KAWETH) += net
subdir-$(CONFIG_USB_PEGASUS) += net
subdir-$(CONFIG_USB_RTL8150) += net
subdir-$(CONFIG_USB_USBNET) += net
ifeq ($(CONFIG_USB_NET),y)
obj-y += net/usb-net.o
endif
# Object files in subdirectories
mod-subdirs := serial hcd
subdir-$(CONFIG_USB_DC2XX) += image
subdir-$(CONFIG_USB_HPUSBSCSI) += image
subdir-$(CONFIG_USB_MDC800) += image
subdir-$(CONFIG_USB_MICROTEK) += image
subdir-$(CONFIG_USB_SCANNER) += image
ifeq ($(CONFIG_USB_IMAGE),y)
obj-y += image/usb-image.o
endif
subdir-$(CONFIG_USB_EHCI_HCD) += hcd
subdir-$(CONFIG_USB_OHCI_HCD) += hcd
subdir-$(CONFIG_USB_SERIAL) += serial
subdir-$(CONFIG_USB_STORAGE) += storage
ifeq ($(CONFIG_USB_SERIAL),y)
obj-y += serial/usb-serial.o
endif
ifeq ($(CONFIG_USB_STORAGE),y)
obj-y += storage/storage.o
subdir-$(CONFIG_USB_AUERSWALD) += misc
subdir-$(CONFIG_USB_EMI26) += misc
subdir-$(CONFIG_USB_RIO500) += misc
subdir-$(CONFIG_USB_TIGL) += misc
subdir-$(CONFIG_USB_USS720) += misc
ifeq ($(CONFIG_USB_MISC),y)
obj-y += misc/usb-misc.o
endif
include $(TOPDIR)/Rules.make
drivers/usb/README 0 → 100644
View file @ e60193f2
Here is a list of what each subdirectory here is, and what is contained in
them.
core/ - This is for the core USB host code, including the
usbfs files.
host/ - This is for all of the USB host drivers. This
includes UHCI, OHCI, EHCI, and any others that might
be created in the future.
device/ - This is for all of the USB device controller drivers.
Individual USB driver directories. A new driver should be added to the
first subdirectory in the list below that it fits into.
image/ - This is for still image drivers, like scanners or
digital cameras.
input/ - This if for any driver that uses the input subsystem,
like keyboard, mice, touchscreens, tablets, etc.
media/ - This is for multimedia drivers, like video cameras,
radios, and any other drivers that talk to the v4l
subsystem.
net/ - This is for network drivers.
serial/ - This is for USB to serial drivers.
storage/ - This is for USB mass-storage drivers.
class/ - This is for all USB device drivers that do not fit
into any of the above categories, and work for a range
of USB Class specified devices.
misc/ - This is for all USB device drivers that do not fit
into any of the above categories.
drivers/usb/class/Config.in 0 → 100644
View file @ e60193f2
#
# USB Class driver configuration
#
comment 'USB Device Class drivers'
dep_tristate ' USB Audio support' CONFIG_USB_AUDIO $CONFIG_USB $CONFIG_SOUND
dep_tristate ' USB Bluetooth support (EXPERIMENTAL)' CONFIG_USB_BLUETOOTH $CONFIG_USB $CONFIG_EXPERIMENTAL
dep_tristate ' USB Modem (CDC ACM) support' CONFIG_USB_ACM $CONFIG_USB
dep_tristate ' USB Printer support' CONFIG_USB_PRINTER $CONFIG_USB
# Turn on CONFIG_USB_CLASS if any of the drivers are compiled into the kernel
# to make our Makefile logic a bit simpler.
if [ "$CONFIG_USB_AUDIO" = "y" -o "$CONFIG_USB_BLUETOOTH" = "y" ]; then
define_bool CONFIG_USB_CLASS y
fi
if [ "$CONFIG_USB_ACM" = "y" -o "$CONFIG_USB_PRINTER" = "y" ]; then
define_bool CONFIG_USB_CLASS y
fi
drivers/usb/class/Makefile 0 → 100644
View file @ e60193f2
#
# Makefile for USB Class drivers
# (one step up from the misc category)
#
O_TARGET := usb-class.o
obj-$(CONFIG_USB_ACM) += cdc-acm.o
obj-$(CONFIG_USB_AUDIO) += audio.o
obj-$(CONFIG_USB_BLUETOOTH) += bluetooth.o
obj-$(CONFIG_USB_PRINTER) += printer.o
include $(TOPDIR)/Rules.make
drivers/usb/core/Config.in 0 → 100644
View file @ e60193f2
#
# USB Core configuration
#
bool ' USB verbose debug messages' CONFIG_USB_DEBUG
comment 'Miscellaneous USB options'
bool ' USB device filesystem' CONFIG_USB_DEVICEFS
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
bool ' Enforce USB bandwidth allocation (EXPERIMENTAL)' CONFIG_USB_BANDWIDTH
else
define_bool CONFIG_USB_BANDWIDTH n
fi
bool ' Long timeout for slow-responding devices (some MGE Ellipse UPSes)' CONFIG_USB_LONG_TIMEOUT
drivers/usb/core/Makefile 0 → 100644
View file @ e60193f2
#
# Makefile for USB Core files and filesystem
#
O_TARGET := usb-core.o
export-objs := usb.o hcd.o
usbcore-objs := usb.o usb-debug.o hub.o hcd.o
ifeq ($(CONFIG_USB_DEVICEFS),y)
usbcore-objs += devio.o inode.o drivers.o devices.o
endif
obj-$(CONFIG_USB) += usbcore.o
include $(TOPDIR)/Rules.make
drivers/usb/hcd/Makefile deleted 100644 → 0
View file @ 0637845a
#
# Makefile for USB Host Controller Driver
# framework and drivers
#
O_TARGET :=
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o
# obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o
# Extract lists of the multi-part drivers.
# The 'int-*' lists are the intermediate files used to build the multi's.
multi-y := $(filter $(list-multi), $(obj-y))
multi-m := $(filter $(list-multi), $(obj-m))
int-y := $(sort $(foreach m, $(multi-y), $($(basename $(m))-objs)))
int-m := $(sort $(foreach m, $(multi-m), $($(basename $(m))-objs)))
# Take multi-part drivers out of obj-y and put components in.
obj-y := $(filter-out $(list-multi), $(obj-y)) $(int-y)
# Translate to Rules.make lists.
OX_OBJS := $(obj-y)
MX_OBJS := $(obj-m)
MIX_OBJS := $(int-m)
include $(TOPDIR)/Rules.make
drivers/usb/hcd/Config.help → drivers/usb/host/Config.help
View file @ e60193f2
......@@ -35,3 +35,57 @@ CONFIG_USB_OHCI_HCD
inserted in and removed from the running kernel whenever you want).
The module will be called ohci-hcd.o. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
CONFIG_USB_UHCI
The Universal Host Controller Interface is a standard by Intel for
accessing the USB hardware in the PC (which is also called the USB
host controller). If your USB host controller conforms to this
standard, you may want to say Y, but see below. All recent boards
with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX,
i810, i820) conform to this standard. Also all VIA PCI chipsets
(like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro
133).
Currently there exist two drivers for UHCI host controllers: this
one and the so-called JE driver, which you can get from
"UHCI alternate (JE) support", below. You need only one.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called usb-uhci.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
CONFIG_USB_UHCI_ALT
The Universal Host Controller Interface is a standard by Intel for
accessing the USB hardware in the PC (which is also called the USB
host controller). If your USB host controller conforms to this
standard, you may want to say Y, but see below. All recent boards
with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX,
i810, i820) conform to this standard. Also all VIA PCI chipsets
(like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro
133). If unsure, say Y.
Currently there exist two drivers for UHCI host controllers: this
so-called JE driver, and the one you get from "UHCI support", above.
You need only one.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called uhci.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
CONFIG_USB_OHCI
The Open Host Controller Interface is a standard by
Compaq/Microsoft/National for accessing the USB PC hardware (also
called USB host controller). If your USB host controller conforms to
this standard, say Y. The USB host controllers on most non-Intel
architectures and on several x86 compatibles with non-Intel chipsets
-- like SiS (aktual 610, 610 and so on) or ALi (ALi IV, ALi V,
Aladdin Pro..) -- conform to this standard.
You may want to read <file:Documentation/usb/ohci.txt>.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called usb-ohci.o. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
drivers/usb/hcd/Config.in → drivers/usb/host/Config.in
View file @ e60193f2
#
# USB Host Controller Drivers
#
comment 'USB Host Controller Drivers'
dep_tristate ' EHCI HCD (USB 2.0) support (EXPERIMENTAL)' CONFIG_USB_EHCI_HCD $CONFIG_USB $CONFIG_EXPERIMENTAL
dep_tristate ' OHCI HCD support (EXPERIMENTAL)' CONFIG_USB_OHCI_HCD $CONFIG_USB $CONFIG_EXPERIMENTAL
# dep_tristate ' UHCI HCD (most Intel and VIA) support (EXPERIMENTAL)' CONFIG_USB_UHCI_HCD $CONFIG_USB $CONFIG_EXPERIMENTAL
if [ "$CONFIG_USB_UHCI_ALT" != "y" ]; then
dep_tristate ' UHCI (Intel PIIX4, VIA, ...) support' CONFIG_USB_UHCI $CONFIG_USB
fi
if [ "$CONFIG_USB_UHCI" != "y" ]; then
dep_tristate ' UHCI Alternate Driver (JE) support' CONFIG_USB_UHCI_ALT $CONFIG_USB
else
define_bool CONFIG_USB_UHCI_ALT n
fi
dep_tristate ' OHCI (Compaq, iMacs, OPTi, SiS, ALi, ...) support' CONFIG_USB_OHCI $CONFIG_USB
# Turn on CONFIG_USB_HOST if any of the Host controller drivers are compiled
# into the kernel to make our Makefile logic a bit simpler
if [ "$CONFIG_USB_EHCI_HCD" = "y" -o "$CONFIG_USB_OHCI_HCD" = "y" -o "$CONFIG_USB_UHCI_HCD" = "y" ]; then
define_bool CONFIG_USB_HOST y
fi
if [ "$CONFIG_USB_UHCI" = "y" -o "$CONFIG_USB_UHCI_ALT" = "y" -o "$CONFIG_USB_OHCI" = "y" ]; then
define_bool CONFIG_USB_HOST y
fi
drivers/usb/host/Makefile 0 → 100644
View file @ e60193f2
#
# Makefile for USB Host Controller Driver
# framework and drivers
#
O_TARGET := usb-host.o
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o
# obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o
obj-$(CONFIG_USB_UHCI) += usb-uhci.o
obj-$(CONFIG_USB_UHCI_ALT) += uhci.o
obj-$(CONFIG_USB_OHCI) += usb-ohci.o
include $(TOPDIR)/Rules.make
drivers/usb/hcd/ehci-hcd.c → drivers/usb/host/ehci-hcd.c
View file @ e60193f2
......@@ -38,7 +38,7 @@
#endif
#include <linux/usb.h>
#include "../hcd.h"
#include "../core/hcd.h"
#include <asm/byteorder.h>
#include <asm/io.h>
......
drivers/usb/hcd/ohci-hcd.c → drivers/usb/host/ohci-hcd.c
View file @ e60193f2
......@@ -81,7 +81,7 @@
#endif
#include <linux/usb.h>
#include "../hcd.h"
#include "../core/hcd.h"
#include <asm/io.h>
#include <asm/irq.h>
......
drivers/usb/uhci.c → drivers/usb/host/uhci.c
View file @ e60193f2
......@@ -53,7 +53,7 @@
#include <asm/irq.h>
#include <asm/system.h>
#include "hcd.h"
#include "../core/hcd.h"
#include "uhci.h"
#include <linux/pm.h>
......
drivers/usb/usb-ohci.c → drivers/usb/host/usb-ohci.c
View file @ e60193f2
......@@ -78,7 +78,7 @@
#define OHCI_USE_NPS // force NoPowerSwitching mode
// #define OHCI_VERBOSE_DEBUG /* not always helpful */
#include "hcd.h"
#include "../core/hcd.h"
#include "usb-ohci.h"
......
drivers/usb/usb-uhci.c → drivers/usb/host/usb-uhci.c
View file @ e60193f2
......@@ -57,7 +57,7 @@
#define VERSTR "$Revision: 1.275 $ time " __TIME__ " " __DATE__
#include <linux/usb.h>
#include "hcd.h"
#include "../core/hcd.h"
#include "usb-uhci.h"
#include "usb-uhci-debug.h"
......
drivers/usb/image/Config.in 0 → 100644
View file @ e60193f2
#
# USB Imageing devices configuration
#
comment 'USB Imaging devices'
dep_tristate ' USB Kodak DC-2xx Camera support' CONFIG_USB_DC2XX $CONFIG_USB
dep_tristate ' USB Mustek MDC800 Digital Camera support (EXPERIMENTAL)' CONFIG_USB_MDC800 $CONFIG_USB $CONFIG_EXPERIMENTAL
dep_tristate ' USB Scanner support' CONFIG_USB_SCANNER $CONFIG_USB
dep_tristate ' Microtek X6USB scanner support' CONFIG_USB_MICROTEK $CONFIG_USB $CONFIG_SCSI
dep_tristate ' HP53xx USB scanner support (EXPERIMENTAL)' CONFIG_USB_HPUSBSCSI $CONFIG_USB $CONFIG_SCSI $CONFIG_EXPERIMENTAL
# Turn on CONFIG_USB_IMAGE if any of the drivers are compiled into the kernel to
# make our Makefile logic a bit simpler
if [ "$CONFIG_USB_DC2XX" = "y" -o "$CONFIG_USB_MDC800" = "y" ]; then
define_bool CONFIG_USB_IMAGE y
fi
if [ "$CONFIG_USB_SCANNER" = "y" -o "$CONFIG_USB_MICROTEK" = "y" -o "$CONFIG_USB_HPUSBSCSI" = "y" ]; then
define_bool CONFIG_USB_IMAGE y
fi
drivers/usb/image/Makefile 0 → 100644
View file @ e60193f2
#
# Makefile for USB Image drivers
#
O_TARGET := usb-image.o
obj-$(CONFIG_USB_DC2XX) += dc2xx.o
obj-$(CONFIG_USB_MDC800) += mdc800.o
obj-$(CONFIG_USB_HPUSBSCSI) += hpusbscsi.o
obj-$(CONFIG_USB_MICROTEK) += microtek.o
obj-$(CONFIG_USB_SCANNER) += scanner.o
include $(TOPDIR)/Rules.make
drivers/usb/hpusbscsi.c → drivers/usb/image/hpusbscsi.c
View file @ e60193f2
......@@ -10,9 +10,9 @@
#include <linux/usb.h>
#include <asm/atomic.h>
#include <linux/blk.h>
#include "../scsi/scsi.h"
#include "../scsi/hosts.h"
#include "../scsi/sd.h"
#include "../../scsi/scsi.h"
#include "../../scsi/hosts.h"
#include "../../scsi/sd.h"
#include "hpusbscsi.h"
......
drivers/usb/microtek.c → drivers/usb/image/microtek.c
View file @ e60193f2
......@@ -135,9 +135,9 @@
#include <asm/atomic.h>
#include <linux/blk.h>
#include "../scsi/scsi.h"
#include "../scsi/hosts.h"
#include "../scsi/sd.h"
#include "../../scsi/scsi.h"
#include "../../scsi/hosts.h"
#include "../../scsi/sd.h"
#include "microtek.h"
......
drivers/usb/input/Config.in 0 → 100644
View file @ e60193f2
#
# USB Input driver configuration
#
comment 'USB Human Interface Devices (HID)'
dep_tristate ' USB Human Interface Device (full HID) support' CONFIG_USB_HID $CONFIG_USB
if [ "$CONFIG_INPUT" = "n" ]; then
comment ' Input core support is needed for USB HID input layer or HIDBP support'
fi
dep_mbool ' HID input layer support' CONFIG_USB_HIDINPUT $CONFIG_INPUT $CONFIG_USB_HID
dep_mbool ' /dev/hiddev raw HID device support' CONFIG_USB_HIDDEV $CONFIG_USB_HID
if [ "$CONFIG_USB_HID" != "y" ]; then
dep_tristate ' USB HIDBP Keyboard (basic) support' CONFIG_USB_KBD $CONFIG_USB $CONFIG_INPUT
dep_tristate ' USB HIDBP Mouse (basic) support' CONFIG_USB_MOUSE $CONFIG_USB $CONFIG_INPUT
fi
dep_tristate ' Wacom Intuos/Graphire tablet support' CONFIG_USB_WACOM $CONFIG_USB $CONFIG_INPUT
# Turn on CONFIG_USB_INPUT if any of the drivers are compiled into the kernel
# to make our Makefile logic a bit simpler.
if [ "$CONFIG_USB_HID" = "y" -o "$CONFIG_USB_KBD" = "y" -o "$CONFIG_USB_MOUSE" = "y" ]; then
define_bool CONFIG_USB_INPUT y
fi
if [ "$CONFIG_USB_WACOM" = "y" ]; then
define_bool CONFIG_USB_INPUT y
fi
drivers/usb/input/Makefile 0 → 100644
View file @ e60193f2
#
# Makefile for the USB input drivers
#
O_TARGET := usb-input.o
# Multipart objects.
hid-objs := hid-core.o
# Optional parts of multipart objects.
ifeq ($(CONFIG_USB_HIDDEV),y)
hid-objs += hiddev.o
endif
ifeq ($(CONFIG_USB_HIDINPUT),y)
hid-objs += hid-input.o
endif
obj-$(CONFIG_USB_HID) += hid.o
obj-$(CONFIG_USB_KBD) += usbkbd.o
obj-$(CONFIG_USB_MOUSE) += usbmouse.o
obj-$(CONFIG_USB_WACOM) += wacom.o
include $(TOPDIR)/Rules.make
drivers/usb/media/Config.in 0 → 100644
View file @ e60193f2
#
# USB Multimedia device configuration
#
comment 'USB Multimedia devices'
dep_tristate ' DABUSB driver' CONFIG_USB_DABUSB $CONFIG_USB
if [ "$CONFIG_VIDEO_DEV" = "n" ]; then
comment ' Video4Linux support is needed for USB Multimedia device support'
fi
dep_tristate ' USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)' CONFIG_USB_VICAM $CONFIG_USB $CONFIG_VIDEO_DEV $CONFIG_EXPERIMENTAL
dep_tristate ' D-Link USB FM radio support (EXPERIMENTAL)' CONFIG_USB_DSBR $CONFIG_USB $CONFIG_VIDEO_DEV $CONFIG_EXPERIMENTAL
dep_tristate ' USB IBM (Xirlink) C-it Camera support' CONFIG_USB_IBMCAM $CONFIG_USB $CONFIG_VIDEO_DEV
dep_tristate ' USB Konica Webcam support' CONFIG_USB_KONICAWC $CONFIG_USB $CONFIG_VIDEO_DEV
dep_tristate ' USB OV511 Camera support' CONFIG_USB_OV511 $CONFIG_USB $CONFIG_VIDEO_DEV
dep_tristate ' USB Philips Cameras' CONFIG_USB_PWC $CONFIG_USB $CONFIG_VIDEO_DEV
dep_tristate ' USB SE401 Camera support' CONFIG_USB_SE401 $CONFIG_USB $CONFIG_VIDEO_DEV
dep_tristate ' USB STV680 (Pencam) Camera support' CONFIG_USB_STV680 $CONFIG_USB $CONFIG_VIDEO_DEV
# Turn on CONFIG_USB_MEDIA if any of the drivers are compiled into the kernel
# to make our Makefile logic a bit simpler
if [ "$CONFIG_USB_IBMCAM" = "y" -o "$CONFIG_USB_OV511" = "y" -o "$CONFIG_USB_PWC" = "y" ]; then
define_bool CONFIG_USB_MEDIA y
fi
if [ "$CONFIG_USB_SE401" = "y" -o "$CONFIG_USB_STV680" = "y" -o "$CONFIG_USB_VICAM" = "y" ]; then
define_bool CONFIG_USB_MEDIA y
fi
if [ "$CONFIG_USB_DSBR" = "y" -o "$CONFIG_USB_KONICAWC" = "y" -o "$CONFIG_USB_DABUSB" = "y" ]; then
define_bool CONFIG_USB_MEDIA y
fi
drivers/usb/media/Makefile 0 → 100644
View file @ e60193f2
#
# Makefile for USB Media drivers
#
O_TARGET := usb-media.o
export-objs := ov511.o pwc-uncompress.o
pwc-objs := pwc-if.o pwc-misc.o pwc-ctrl.o pwc-uncompress.o
obj-$(CONFIG_USB_DABUSB) += dabusb.o
obj-$(CONFIG_USB_DSBR) += dsbr100.o
obj-$(CONFIG_USB_IBMCAM) += ibmcam.o usbvideo.o ultracam.o
obj-$(CONFIG_USB_KONICAWC) += konicawc.o usbvideo.o
obj-$(CONFIG_USB_OV511) += ov511.o
obj-$(CONFIG_USB_PWC) += pwc.o
obj-$(CONFIG_USB_SE401) += se401.o
obj-$(CONFIG_USB_STV680) += stv680.o
obj-$(CONFIG_USB_VICAM) += vicam.o
include $(TOPDIR)/Rules.make
drivers/usb/misc/Makefile 0 → 100644
View file @ e60193f2
#
# Makefile for the rest of the USB drivers
# (the ones that don't fit into any other categories)
#
O_TARGET := usb-misc.o
obj-$(CONFIG_USB_AUERSWALD) += auerswald.o
obj-$(CONFIG_USB_EMI26) += emi26.o
obj-$(CONFIG_USB_RIO500) += rio500.o
obj-$(CONFIG_USB_TIGL) += tiglusb.o
obj-$(CONFIG_USB_USS720) += uss720.o
include $(TOPDIR)/Rules.make
drivers/usb/net/Config.in 0 → 100644
View file @ e60193f2
#
# USB Network devices configuration
#
comment 'USB Network adaptors'
if [ "$CONFIG_NET" = "n" ]; then
comment ' Networking support is needed for USB Networking device support'
else
dep_tristate ' USB CATC NetMate-based Ethernet device support (EXPERIMENTAL)' CONFIG_USB_CATC $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
dep_tristate ' USB CDC Ethernet support (EXPERIMENTAL)' CONFIG_USB_CDCETHER $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
dep_tristate ' USB KLSI KL5USB101-based ethernet device support (EXPERIMENTAL)' CONFIG_USB_KAWETH $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
dep_tristate ' USB Pegasus/Pegasus-II based ethernet device support (EXPERIMENTAL)' CONFIG_USB_PEGASUS $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
dep_tristate ' USB RTL8150 based ethernet device support (EXPERIMENTAL)' CONFIG_USB_RTL8150 $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
dep_tristate ' USB-to-USB Networking cable device support (EXPERIMENTAL)' CONFIG_USB_USBNET $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
fi
# Turn on CONFIG_USB_NET if any of the drivers are compiled into the kernel to
# make our Makefile logic a bit simpler
if [ "$CONFIG_USB_PEGASUS" = "y" -o "$CONFIG_USB_RTL8150" = "y" -o "$CONFIG_USB_KAWETH" = "y" ]; then
define_bool CONFIG_USB_NET y
fi
if [ "$CONFIG_USB_CATC" = "y" -o "$CONFIG_USB_USBNET" = "y" -o "$CONFIG_USB_CDCETHER" = "y" ]; then
define_bool CONFIG_USB_NET y
fi
drivers/usb/net/Makefile 0 → 100644
View file @ e60193f2
#
# Makefile for USB Network drivers
#
O_TARGET := usb-net.o
obj-$(CONFIG_USB_CATC) += catc.o
obj-$(CONFIG_USB_CDCETHER) += cdc-ether.o
obj-$(CONFIG_USB_KAWETH) += kaweth.o
obj-$(CONFIG_USB_PEGASUS) += pegasus.o
obj-$(CONFIG_USB_RTL8150) += rtl8150.o
obj-$(CONFIG_USB_USBNET) += usbnet.o
include $(TOPDIR)/Rules.make
drivers/usb/CDCEther.c → drivers/usb/net/cdc-ether.c
View file @ e60193f2
......@@ -27,7 +27,7 @@
#include <linux/etherdevice.h>
#include <linux/usb.h>
#include <linux/module.h>
#include "CDCEther.h"
#include "cdc-ether.h"
static const char *version = __FILE__ ": v0.98.5 22 Sep 2001 Brad Hards and another";
......
drivers/usb/serial/visor.c
View file @ e60193f2
......@@ -12,6 +12,10 @@
*
* See Documentation/usb/usb-serial.txt for more information on using this driver
*
* (04/03/2002) gkh
* Added support for the Sony OS 4.1 devices. Thanks to Hiroyuki ARAKI
* <hiro@zob.ne.jp> for the information.
*
* (03/27/2002) gkh
* Removed assumptions that port->tty was always valid (is not true
* for usb serial console devices.)
......@@ -186,6 +190,7 @@ static __devinitdata struct usb_device_id combined_id_table [] = {
{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID) },
{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_0_ID) },
{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_S360_ID) },
{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_1_ID) },
{ } /* Terminating entry */
};
......@@ -205,6 +210,7 @@ static __devinitdata struct usb_device_id id_table [] = {
{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_3_5_ID) },
{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_0_ID) },
{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_S360_ID) },
{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_1_ID) },
{ } /* Terminating entry */
};
......@@ -215,7 +221,7 @@ MODULE_DEVICE_TABLE (usb, id_table);
/* All of the device info needed for the Handspring Visor, and Palm 4.0 devices */
static struct usb_serial_device_type handspring_device = {
owner: THIS_MODULE,
name: "Handspring Visor / Palm 4.0 / Clié 4.0",
name: "Handspring Visor / Palm 4.0 / Clié 4.x",
id_table: combined_id_table,
num_interrupt_in: 0,
num_bulk_in: 2,
......@@ -582,7 +588,8 @@ static int visor_startup (struct usb_serial *serial)
}
if ((serial->dev->descriptor.idVendor == PALM_VENDOR_ID) ||
(serial->dev->descriptor.idVendor == SONY_VENDOR_ID)) {
((serial->dev->descriptor.idVendor == SONY_VENDOR_ID) &&
(serial->dev->descriptor.idProduct != SONY_CLIE_4_1_ID))) {
/* Palm OS 4.0 Hack */
response = usb_control_msg (serial->dev, usb_rcvctrlpipe(serial->dev, 0),
PALM_GET_SOME_UNKNOWN_INFORMATION,
......
drivers/usb/serial/visor.h
View file @ e60193f2
......@@ -32,6 +32,7 @@
#define SONY_CLIE_3_5_ID 0x0038
#define SONY_CLIE_4_0_ID 0x0066
#define SONY_CLIE_S360_ID 0x0095
#define SONY_CLIE_4_1_ID 0x009A
/****************************************************************************
* Handspring Visor Vendor specific request codes (bRequest values)
......
drivers/usb/storage/Config.help 0 → 100644
View file @ e60193f2
CONFIG_USB_STORAGE
Say Y here if you want to connect USB mass storage devices to your
computer's USB port.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called usb-storage.o. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
CONFIG_USB_STORAGE_DEBUG
Say Y here in order to have the USB Mass Storage code generate
verbose debugging messages.
CONFIG_USB_STORAGE_ISD200
Say Y here if you want to use USB Mass Store devices based
on the In-Systems Design ISD-200 USB/ATA bridge.
Some of the products that use this chip are:
- Archos Jukebox 6000
- ISD SmartCable for Storage
- Taiwan Skymaster CD530U/DEL-0241 IDE bridge
- Sony CRX10U CD-R/RW drive
- CyQ've CQ8060A CDRW drive
- Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
CONFIG_USB_STORAGE_FREECOM
Support for the Freecom USB to IDE/ATAPI adaptor.
Freecom has a web page at <http://www.freecom.de/>.
CONFIG_USB_STORAGE_DPCM
Say Y here to support the Microtech ZiO! CompactFlash/SmartMedia
reader, details at <http://www.microtechint.com/zio/index.html>.
This driver treats the flash card as a removable storage device.
CONFIG_USB_STORAGE_SDDR09
Say Y here to include additional code to support the Sandisk SDDR-09
SmartMedia reader in the USB Mass Storage driver.
drivers/usb/storage/Config.in 0 → 100644
View file @ e60193f2
#
# USB Storage driver configuration
#
if [ "$CONFIG_SCSI" = "n" ]; then
comment ' SCSI support is needed for USB Storage'
fi
dep_tristate ' USB Mass Storage support' CONFIG_USB_STORAGE $CONFIG_USB $CONFIG_SCSI
dep_mbool ' USB Mass Storage verbose debug' CONFIG_USB_STORAGE_DEBUG $CONFIG_USB_STORAGE
dep_mbool ' Datafab MDCFE-B Compact Flash Reader support' CONFIG_USB_STORAGE_DATAFAB $CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
dep_mbool ' Freecom USB/ATAPI Bridge support' CONFIG_USB_STORAGE_FREECOM $CONFIG_USB_STORAGE
dep_mbool ' ISD-200 USB/ATA Bridge support' CONFIG_USB_STORAGE_ISD200 $CONFIG_USB_STORAGE
dep_mbool ' Microtech CompactFlash/SmartMedia support' CONFIG_USB_STORAGE_DPCM $CONFIG_USB_STORAGE
dep_mbool ' HP CD-Writer 82xx support' CONFIG_USB_STORAGE_HP8200e $CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
dep_mbool ' SanDisk SDDR-09 (and other SmartMedia) support' CONFIG_USB_STORAGE_SDDR09 $CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
dep_mbool ' Lexar Jumpshot Compact Flash Reader' CONFIG_USB_STORAGE_JUMPSHOT $CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
drivers/usb/storage/Makefile
View file @ e60193f2
......@@ -8,8 +8,6 @@
O_TARGET := storage.o
EXTRA_CFLAGS := -I../../scsi/
list-multi := usb-storage.o
obj-$(CONFIG_USB_STORAGE) += usb-storage.o
usb-storage-obj-$(CONFIG_USB_STORAGE_DEBUG) += debug.o
......@@ -27,6 +25,3 @@ usb-storage-objs := scsiglue.o protocol.o transport.o usb.o \
initializers.o $(usb-storage-obj-y)
include $(TOPDIR)/Rules.make
usb-storage.o: $(usb-storage-objs)
$(LD) -r -o $@ $(usb-storage-objs)
lib/Makefile
View file @ e60193f2
......@@ -28,7 +28,7 @@ subdir-$(CONFIG_ZLIB_DEFLATE) += zlib_deflate
obj-y += $(join $(subdir-y),$(subdir-y:%=/%.o))
include $(TOPDIR)/drivers/net/Makefile.lib
include $(TOPDIR)/drivers/usb/Makefile.lib
include $(TOPDIR)/drivers/usb/class/Makefile.lib
include $(TOPDIR)/fs/Makefile.lib
include $(TOPDIR)/Rules.make
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7