[media] smiapp: Remove set_xclk() callback from hwconfig

The clock framework is generally so well supported that there's no reason
to keep this one around.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

drivers/media/i2c/smiapp/smiapp-core.c

@@ -1201,10 +1201,6 @@ static int smiapp_power_on(struct smiapp_sensor *sensor)
 	}
 	usleep_range(1000, 1000);
 
-	if (sensor->hwcfg->set_xclk)
-		rval = sensor->hwcfg->set_xclk(
-			&sensor->src->sd, sensor->hwcfg->ext_clk);
-	else
 	rval = clk_prepare_enable(sensor->ext_clk);
 	if (rval < 0) {
 		dev_dbg(&client->dev, "failed to enable xclk\n");
@@ -1322,9 +1318,6 @@ static int smiapp_power_on(struct smiapp_sensor *sensor)
 
 out_cci_addr_fail:
 	gpiod_set_value(sensor->xshutdown, 0);
-	if (sensor->hwcfg->set_xclk)
-		sensor->hwcfg->set_xclk(&sensor->src->sd, 0);
-	else
 	clk_disable_unprepare(sensor->ext_clk);
 
 out_xclk_fail:
@@ -1347,9 +1340,6 @@ static void smiapp_power_off(struct smiapp_sensor *sensor)
 			     SMIAPP_SOFTWARE_RESET);
 
 	gpiod_set_value(sensor->xshutdown, 0);
-	if (sensor->hwcfg->set_xclk)
-		sensor->hwcfg->set_xclk(&sensor->src->sd, 0);
-	else
 	clk_disable_unprepare(sensor->ext_clk);
 	usleep_range(5000, 5000);
 	regulator_disable(sensor->vana);
@@ -2551,7 +2541,6 @@ static int smiapp_init(struct smiapp_sensor *sensor)
 		return PTR_ERR(sensor->vana);
 	}
 
-	if (!sensor->hwcfg->set_xclk) {
 	sensor->ext_clk = devm_clk_get(&client->dev, NULL);
 	if (IS_ERR(sensor->ext_clk)) {
 		dev_err(&client->dev, "could not get clock (%ld)\n",
@@ -2567,7 +2556,6 @@ static int smiapp_init(struct smiapp_sensor *sensor)
 			sensor->hwcfg->ext_clk);
 		return rval;
 	}
-	}
 
 	sensor->xshutdown = devm_gpiod_get_optional(&client->dev, "xshutdown",
 						    GPIOD_OUT_LOW);
@@ -3108,9 +3096,6 @@ static int smiapp_remove(struct i2c_client *client)
 
 	if (sensor->power_count) {
 		gpiod_set_value(sensor->xshutdown, 0);
-		if (sensor->hwcfg->set_xclk)
-			sensor->hwcfg->set_xclk(&sensor->src->sd, 0);
-		else
 		clk_disable_unprepare(sensor->ext_clk);
 		sensor->power_count = 0;
 	}

include/media/i2c/smiapp.h

@@ -73,8 +73,6 @@ struct smiapp_hwconfig {
 	enum smiapp_module_board_orient module_board_orient;
 
 	struct smiapp_flash_strobe_parms *strobe_setup;
-
-	int (*set_xclk)(struct v4l2_subdev *sd, int hz);
 };
 
 #endif /* __SMIAPP_H_  */