Commit e6316565 authored by Alan Stern's avatar Alan Stern Committed by Greg Kroah-Hartman

EHCI: local variable for port status register

This patch (as708) introduces a local variable to hold the port
status-register address in ehci-hub.c.  There's not much improvement
in the object code, but it sure is a lot easier to read.
Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 896fbd71
......@@ -193,6 +193,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
static int check_reset_complete (
struct ehci_hcd *ehci,
int index,
u32 __iomem *status_reg,
int port_status
) {
if (!(port_status & PORT_CONNECT)) {
......@@ -217,8 +218,7 @@ static int check_reset_complete (
// what happens if HCS_N_CC(params) == 0 ?
port_status |= PORT_OWNER;
port_status &= ~PORT_RWC_BITS;
ehci_writel(ehci, port_status,
&ehci->regs->port_status [index]);
ehci_writel(ehci, port_status, status_reg);
} else
ehci_dbg (ehci, "port %d high speed\n", index + 1);
......@@ -347,6 +347,7 @@ static int ehci_hub_control (
) {
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
int ports = HCS_N_PORTS (ehci->hcs_params);
u32 __iomem *status_reg = &ehci->regs->port_status[wIndex - 1];
u32 temp, status;
unsigned long flags;
int retval = 0;
......@@ -375,18 +376,17 @@ static int ehci_hub_control (
if (!wIndex || wIndex > ports)
goto error;
wIndex--;
temp = ehci_readl(ehci, &ehci->regs->port_status [wIndex]);
temp = ehci_readl(ehci, status_reg);
if (temp & PORT_OWNER)
break;
switch (wValue) {
case USB_PORT_FEAT_ENABLE:
ehci_writel(ehci, temp & ~PORT_PE,
&ehci->regs->port_status [wIndex]);
ehci_writel(ehci, temp & ~PORT_PE, status_reg);
break;
case USB_PORT_FEAT_C_ENABLE:
ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_PEC,
&ehci->regs->port_status [wIndex]);
status_reg);
break;
case USB_PORT_FEAT_SUSPEND:
if (temp & PORT_RESET)
......@@ -399,7 +399,7 @@ static int ehci_hub_control (
/* resume signaling for 20 msec */
temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
ehci_writel(ehci, temp | PORT_RESUME,
&ehci->regs->port_status [wIndex]);
status_reg);
ehci->reset_done [wIndex] = jiffies
+ msecs_to_jiffies (20);
}
......@@ -411,15 +411,15 @@ static int ehci_hub_control (
if (HCS_PPC (ehci->hcs_params))
ehci_writel(ehci,
temp & ~(PORT_RWC_BITS | PORT_POWER),
&ehci->regs->port_status [wIndex]);
status_reg);
break;
case USB_PORT_FEAT_C_CONNECTION:
ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_CSC,
&ehci->regs->port_status [wIndex]);
status_reg);
break;
case USB_PORT_FEAT_C_OVER_CURRENT:
ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_OCC,
&ehci->regs->port_status [wIndex]);
status_reg);
break;
case USB_PORT_FEAT_C_RESET:
/* GetPortStatus clears reset */
......@@ -443,7 +443,7 @@ static int ehci_hub_control (
goto error;
wIndex--;
status = 0;
temp = ehci_readl(ehci, &ehci->regs->port_status [wIndex]);
temp = ehci_readl(ehci, status_reg);
// wPortChange bits
if (temp & PORT_CSC)
......@@ -461,13 +461,11 @@ static int ehci_hub_control (
ehci->reset_done [wIndex] = 0;
/* stop resume signaling */
temp = ehci_readl(ehci,
&ehci->regs->port_status [wIndex]);
temp = ehci_readl(ehci, status_reg);
ehci_writel(ehci,
temp & ~(PORT_RWC_BITS | PORT_RESUME),
&ehci->regs->port_status [wIndex]);
retval = handshake(ehci,
&ehci->regs->port_status [wIndex],
status_reg);
retval = handshake(ehci, status_reg,
PORT_RESUME, 0, 2000 /* 2msec */);
if (retval != 0) {
ehci_err (ehci, "port %d resume error %d\n",
......@@ -486,12 +484,11 @@ static int ehci_hub_control (
/* force reset to complete */
ehci_writel(ehci, temp & ~(PORT_RWC_BITS | PORT_RESET),
&ehci->regs->port_status [wIndex]);
status_reg);
/* REVISIT: some hardware needs 550+ usec to clear
* this bit; seems too long to spin routinely...
*/
retval = handshake(ehci,
&ehci->regs->port_status [wIndex],
retval = handshake(ehci, status_reg,
PORT_RESET, 0, 750);
if (retval != 0) {
ehci_err (ehci, "port %d reset error %d\n",
......@@ -500,9 +497,8 @@ static int ehci_hub_control (
}
/* see what we found out */
temp = check_reset_complete (ehci, wIndex,
ehci_readl(ehci,
&ehci->regs->port_status [wIndex]));
temp = check_reset_complete (ehci, wIndex, status_reg,
ehci_readl(ehci, status_reg));
}
// don't show wPortStatus if it's owned by a companion hc
......@@ -547,7 +543,7 @@ static int ehci_hub_control (
if (!wIndex || wIndex > ports)
goto error;
wIndex--;
temp = ehci_readl(ehci, &ehci->regs->port_status [wIndex]);
temp = ehci_readl(ehci, status_reg);
if (temp & PORT_OWNER)
break;
......@@ -561,13 +557,12 @@ static int ehci_hub_control (
goto error;
if (device_may_wakeup(&hcd->self.root_hub->dev))
temp |= PORT_WAKE_BITS;
ehci_writel(ehci, temp | PORT_SUSPEND,
&ehci->regs->port_status [wIndex]);
ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
break;
case USB_PORT_FEAT_POWER:
if (HCS_PPC (ehci->hcs_params))
ehci_writel(ehci, temp | PORT_POWER,
&ehci->regs->port_status [wIndex]);
status_reg);
break;
case USB_PORT_FEAT_RESET:
if (temp & PORT_RESUME)
......@@ -595,8 +590,7 @@ static int ehci_hub_control (
ehci->reset_done [wIndex] = jiffies
+ msecs_to_jiffies (50);
}
ehci_writel(ehci, temp,
&ehci->regs->port_status [wIndex]);
ehci_writel(ehci, temp, status_reg);
break;
/* For downstream facing ports (these): one hub port is put
......@@ -611,8 +605,7 @@ static int ehci_hub_control (
ehci_quiesce(ehci);
ehci_halt(ehci);
temp |= selector << 16;
ehci_writel(ehci, temp,
&ehci->regs->port_status [wIndex]);
ehci_writel(ehci, temp, status_reg);
break;
default:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment