Commit e69972f5 authored by Jay Hernandez's avatar Jay Hernandez Committed by David S. Miller

cxgb4: Force uninitialized state if FW_ON_ADAPTER is < FW_VERSION and we're the MASTER_PF

Forcing uninitialized state allows us to upgrade and reinitialize the adapter.

FW_VERSION_T4 = 1.4.0.0
FW_VERSION_T5 = 0.0.0.0
At this point driver supports above and greater than above version of firmware.
If it doesn't find the required firmware version than it forces the adapter to
be reinitialized as shown below.

1) If FW_ON_ADAPTER < FW_VERSION and we're the MASTER_PF force uninitialized
   state and a FW upgrade if available.

       - If FW_ON_ADAPTER < /lib/firmware/cxgb4/t*fw.bin we will update the
         adapters FW.
       - If FW_ON_ADAPTER >= /lib/firmware/cxgb4/t*fw.bin don't upgrade FW.
       - If upgrade_fw() fails force reinitialization of the adapter anyways,
         it might still work.

   Either way forcing the uninitialized state allows cxgb4 reinitialize FW.

2) If FW_ON_ADAPTER >= FW_VERSION driver follows normal path.
Signed-off-by: default avatarJay Hernandez <jay@chelsio.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 5c510811
...@@ -51,7 +51,7 @@ ...@@ -51,7 +51,7 @@
#include "t4_hw.h" #include "t4_hw.h"
#define FW_VERSION_MAJOR 1 #define FW_VERSION_MAJOR 1
#define FW_VERSION_MINOR 1 #define FW_VERSION_MINOR 4
#define FW_VERSION_MICRO 0 #define FW_VERSION_MICRO 0
#define FW_VERSION_MAJOR_T5 0 #define FW_VERSION_MAJOR_T5 0
......
...@@ -4842,8 +4842,17 @@ static int adap_init0(struct adapter *adap) ...@@ -4842,8 +4842,17 @@ static int adap_init0(struct adapter *adap)
* is excessively mismatched relative to the driver.) * is excessively mismatched relative to the driver.)
*/ */
ret = t4_check_fw_version(adap); ret = t4_check_fw_version(adap);
/* The error code -EFAULT is returned by t4_check_fw_version() if
* firmware on adapter < supported firmware. If firmware on adapter
* is too old (not supported by driver) and we're the MASTER_PF set
* adapter state to DEV_STATE_UNINIT to force firmware upgrade
* and reinitialization.
*/
if ((adap->flags & MASTER_PF) && ret == -EFAULT)
state = DEV_STATE_UNINIT;
if ((adap->flags & MASTER_PF) && state != DEV_STATE_INIT) { if ((adap->flags & MASTER_PF) && state != DEV_STATE_INIT) {
if (ret == -EINVAL || ret > 0) { if (ret == -EINVAL || ret == -EFAULT || ret > 0) {
if (upgrade_fw(adap) >= 0) { if (upgrade_fw(adap) >= 0) {
/* /*
* Note that the chip was reset as part of the * Note that the chip was reset as part of the
...@@ -4852,6 +4861,20 @@ static int adap_init0(struct adapter *adap) ...@@ -4852,6 +4861,20 @@ static int adap_init0(struct adapter *adap)
*/ */
reset = 0; reset = 0;
ret = t4_check_fw_version(adap); ret = t4_check_fw_version(adap);
} else
if (ret == -EFAULT) {
/*
* Firmware is old but still might
* work if we force reinitialization
* of the adapter. Ignoring FW upgrade
* failure.
*/
dev_warn(adap->pdev_dev,
"Ignoring firmware upgrade "
"failure, and forcing driver "
"to reinitialize the "
"adapter.\n");
ret = 0;
} }
} }
if (ret < 0) if (ret < 0)
......
...@@ -938,6 +938,15 @@ int t4_check_fw_version(struct adapter *adapter) ...@@ -938,6 +938,15 @@ int t4_check_fw_version(struct adapter *adapter)
memcpy(adapter->params.api_vers, api_vers, memcpy(adapter->params.api_vers, api_vers,
sizeof(adapter->params.api_vers)); sizeof(adapter->params.api_vers));
if (major < exp_major || (major == exp_major && minor < exp_minor) ||
(major == exp_major && minor == exp_minor && micro < exp_micro)) {
dev_err(adapter->pdev_dev,
"Card has firmware version %u.%u.%u, minimum "
"supported firmware is %u.%u.%u.\n", major, minor,
micro, exp_major, exp_minor, exp_micro);
return -EFAULT;
}
if (major != exp_major) { /* major mismatch - fail */ if (major != exp_major) { /* major mismatch - fail */
dev_err(adapter->pdev_dev, dev_err(adapter->pdev_dev,
"card FW has major version %u, driver wants %u\n", "card FW has major version %u, driver wants %u\n",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment