Merge branch 'selftests-Add-tests-for-mirroring-to-gretap'

Petr Machata says:

====================
selftests: Add tests for mirroring to gretap

This suite tests GRE-encapsulated mirroring. The general topology that
most of the tests use is as follows, but each test defines details of
the topology based on its needs, and some tests actually use a somewhat
different topology.

+---------------------+                      +---------------------+
| H1                  |                      |                  H2 |
|     + $h1           |                      |           $h2 +     |
+-----|---------------+                      +---------------|-----+
      |                                                      |
+-----|------------------------------------------------------|-----+
| SW  o---> mirror                                           |     |
| +---|------------------------------------------------------|---+ |
| |   + $swp1               BR                         $swp2 +   | |
| +--------------------------------------------------------------+ |
|                                                                  |
|     + $swp3          + gt6 (ip6gretap)    + gt4 (gretap)         |
+-----|----------------:--------------------:----------------------+
      |                :                    :
+-----|----------------:--------------------:----------------------+
|     + $h3            + h3-gt6(ip6gretap)  + h3-gt4 (gretap)      |
| H3                                                               |
+------------------------------------------------------------------+

The following axes of configuration space are tested:

- ingress and egress mirroring
- mirroring triggered by matchall and flower
- mirroring to ipgretap and ip6gretap
- remote tunnel reachable directly or through a next-hop route
- skip_sw as well as skip_hw configurations

Apart from basic tests with the above mentioned features, the following
tests are included:

- handling of changes to neighbors pertinent to routing decisions in
  mirrored underlay
- handling of configuration changes at the mirrored-to tunnel (endpoint
  addresses, upness)

A suite of mlxsw-specific tests will be part of a separate submission
through linux-mlxsw patch queue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

tools/testing/selftests/net/forwarding/lib.sh

@@ -321,6 +321,25 @@ simple_if_fini()
 	vrf_destroy $vrf_name
 }
 
+tunnel_create()
+{
+	local name=$1; shift
+	local type=$1; shift
+	local local=$1; shift
+	local remote=$1; shift
+
+	ip link add name $name type $type \
+	   local $local remote $remote "$@"
+	ip link set dev $name up
+}
+
+tunnel_destroy()
+{
+	local name=$1; shift
+
+	ip link del dev $name
+}
+
 master_name_get()
 {
 	local if_name=$1
@@ -335,6 +354,15 @@ link_stats_tx_packets_get()
        ip -j -s link show dev $if_name | jq '.[]["stats64"]["tx"]["packets"]'
 }
 
+tc_rule_stats_get()
+{
+	local dev=$1; shift
+	local pref=$1; shift
+
+	tc -j -s filter show dev $dev ingress pref $pref |
+	jq '.[1].options.actions[].stats.packets'
+}
+
 mac_get()
 {
 	local if_name=$1
@@ -381,6 +409,74 @@ tc_offload_check()
 	return 0
 }
 
+slow_path_trap_install()
+{
+	local dev=$1; shift
+	local direction=$1; shift
+
+	if [ "${tcflags/skip_hw}" != "$tcflags" ]; then
+		# For slow-path testing, we need to install a trap to get to
+		# slow path the packets that would otherwise be switched in HW.
+		tc filter add dev $dev $direction pref 1 \
+		   flower skip_sw action trap
+	fi
+}
+
+slow_path_trap_uninstall()
+{
+	local dev=$1; shift
+	local direction=$1; shift
+
+	if [ "${tcflags/skip_hw}" != "$tcflags" ]; then
+		tc filter del dev $dev $direction pref 1 flower skip_sw
+	fi
+}
+
+__icmp_capture_add_del()
+{
+	local add_del=$1; shift
+	local pref=$1; shift
+	local vsuf=$1; shift
+	local tundev=$1; shift
+	local filter=$1; shift
+
+	tc filter $add_del dev "$tundev" ingress \
+	   proto ip$vsuf pref $pref \
+	   flower ip_proto icmp$vsuf $filter \
+	   action pass
+}
+
+icmp_capture_install()
+{
+	__icmp_capture_add_del add 100 "" "$@"
+}
+
+icmp_capture_uninstall()
+{
+	__icmp_capture_add_del del 100 "" "$@"
+}
+
+icmp6_capture_install()
+{
+	__icmp_capture_add_del add 100 v6 "$@"
+}
+
+icmp6_capture_uninstall()
+{
+	__icmp_capture_add_del del 100 v6 "$@"
+}
+
+matchall_sink_create()
+{
+	local dev=$1; shift
+
+	tc qdisc add dev $dev clsact
+	tc filter add dev $dev ingress \
+	   pref 10000 \
+	   matchall \
+	   action drop
+}
+
 ##############################################################################
 # Tests
 

tools/testing/selftests/net/forwarding/mirror_gre.sh

+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test uses standard topology for testing gretap. See
+# mirror_gre_topo_lib.sh for more details.
+#
+# Test for "tc action mirred egress mirror" when the device to mirror to is a
+# gretap or ip6gretap netdevice. Expect that the packets come out encapsulated,
+# and another gretap / ip6gretap netdevice is then capable of decapsulating the
+# traffic. Test that the payload is what is expected (ICMP ping request or
+# reply, depending on test).
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+source mirror_gre_topo_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+	mirror_gre_topo_create
+
+	ip address add dev $swp3 192.0.2.129/28
+	ip address add dev $h3 192.0.2.130/28
+
+	ip address add dev $swp3 2001:db8:2::1/64
+	ip address add dev $h3 2001:db8:2::2/64
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ip address del dev $h3 2001:db8:2::2/64
+	ip address del dev $swp3 2001:db8:2::1/64
+
+	ip address del dev $h3 192.0.2.130/28
+	ip address del dev $swp3 192.0.2.129/28
+
+	mirror_gre_topo_destroy
+	vrf_cleanup
+}
+
+test_span_gre_mac()
+{
+	local tundev=$1; shift
+	local direction=$1; shift
+	local prot=$1; shift
+	local what=$1; shift
+
+	local swp3mac=$(mac_get $swp3)
+	local h3mac=$(mac_get $h3)
+
+	RET=0
+
+	mirror_install $swp1 $direction $tundev "matchall $tcflags"
+	tc qdisc add dev $h3 clsact
+	tc filter add dev $h3 ingress pref 77 prot $prot \
+		flower ip_proto 0x2f src_mac $swp3mac dst_mac $h3mac \
+		action pass
+
+	mirror_test v$h1 192.0.2.1 192.0.2.2 $h3 77 10
+
+	tc filter del dev $h3 ingress pref 77
+	tc qdisc del dev $h3 clsact
+	mirror_uninstall $swp1 $direction
+
+	log_test "$direction $what: envelope MAC ($tcflags)"
+}
+
+test_two_spans()
+{
+	RET=0
+
+	mirror_install $swp1 ingress gt4 "matchall $tcflags"
+	mirror_install $swp1 egress gt6 "matchall $tcflags"
+	quick_test_span_gre_dir gt4 ingress
+	quick_test_span_gre_dir gt6 egress
+
+	mirror_uninstall $swp1 ingress
+	fail_test_span_gre_dir gt4 ingress
+	quick_test_span_gre_dir gt6 egress
+
+	mirror_install $swp1 ingress gt4 "matchall $tcflags"
+	mirror_uninstall $swp1 egress
+	quick_test_span_gre_dir gt4 ingress
+	fail_test_span_gre_dir gt6 egress
+
+	mirror_uninstall $swp1 ingress
+	log_test "two simultaneously configured mirrors ($tcflags)"
+}
+
+test_all()
+{
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	full_test_span_gre_dir gt4 ingress 8 0 "mirror to gretap"
+	full_test_span_gre_dir gt6 ingress 8 0 "mirror to ip6gretap"
+	full_test_span_gre_dir gt4 egress 0 8 "mirror to gretap"
+	full_test_span_gre_dir gt6 egress 0 8 "mirror to ip6gretap"
+
+	test_span_gre_mac gt4 ingress ip "mirror to gretap"
+	test_span_gre_mac gt6 ingress ipv6 "mirror to ip6gretap"
+	test_span_gre_mac gt4 egress ip "mirror to gretap"
+	test_span_gre_mac gt6 egress ipv6 "mirror to ip6gretap"
+
+	test_two_spans
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	test_all
+fi
+
+exit $EXIT_STATUS

tools/testing/selftests/net/forwarding/mirror_gre_bound.sh

+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+#   +---------------------+                             +---------------------+
+#   | H1                  |                             |                  H2 |
+#   |     + $h1           |                             |           $h2 +     |
+#   |     | 192.0.2.1/28  |                             |  192.0.2.2/28 |     |
+#   +-----|---------------+                             +---------------|-----+
+#         |                                                             |
+#   +-----|-------------------------------------------------------------|-----+
+#   | SW  o--> mirror                                                   |     |
+#   | +---|-------------------------------------------------------------|---+ |
+#   | |   + $swp1                    BR                           $swp2 +   | |
+#   | +---------------------------------------------------------------------+ |
+#   |                                                                         |
+#   | +---------------------------------------------------------------------+ |
+#   | | OL                      + gt6 (ip6gretap)      + gt4 (gretap)       | |
+#   | |                         : loc=2001:db8:2::1    : loc=192.0.2.129    | |
+#   | |                         : rem=2001:db8:2::2    : rem=192.0.2.130    | |
+#   | |                         : ttl=100              : ttl=100            | |
+#   | |                         : tos=inherit          : tos=inherit        | |
+#   | +-------------------------:--|-------------------:--|-----------------+ |
+#   |                           :  |                   :  |                   |
+#   | +-------------------------:--|-------------------:--|-----------------+ |
+#   | | UL                      :  |,---------------------'                 | |
+#   | |   + $swp3               :  ||                  :                    | |
+#   | |   | 192.0.2.129/28      :  vv                  :                    | |
+#   | |   | 2001:db8:2::1/64    :  + ul (dummy)        :                    | |
+#   | +---|---------------------:----------------------:--------------------+ |
+#   +-----|---------------------:----------------------:----------------------+
+#         |                     :                      :
+#   +-----|---------------------:----------------------:----------------------+
+#   | H3  + $h3                 + h3-gt6 (ip6gretap)   + h3-gt4 (gretap)      |
+#   |       192.0.2.130/28        loc=2001:db8:2::2      loc=192.0.2.130      |
+#   |       2001:db8:2::2/64      rem=2001:db8:2::1      rem=192.0.2.129      |
+#   |                             ttl=100                ttl=100              |
+#   |                             tos=inherit            tos=inherit          |
+#   |                                                                         |
+#   +-------------------------------------------------------------------------+
+#
+# This tests mirroring to gretap and ip6gretap configured in an overlay /
+# underlay manner, i.e. with a bound dummy device that marks underlay VRF where
+# the encapsulated packed should be routed.
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/28
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/28
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/28
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2 192.0.2.2/28
+}
+
+h3_create()
+{
+	simple_if_init $h3 192.0.2.130/28 2001:db8:2::2/64
+
+	tunnel_create h3-gt4 gretap 192.0.2.130 192.0.2.129
+	ip link set h3-gt4 vrf v$h3
+	matchall_sink_create h3-gt4
+
+	tunnel_create h3-gt6 ip6gretap 2001:db8:2::2 2001:db8:2::1
+	ip link set h3-gt6 vrf v$h3
+	matchall_sink_create h3-gt6
+}
+
+h3_destroy()
+{
+	tunnel_destroy h3-gt6
+	tunnel_destroy h3-gt4
+
+	simple_if_fini $h3 192.0.2.130/28 2001:db8:2::2/64
+}
+
+switch_create()
+{
+	# Bridge between H1 and H2.
+
+	ip link add name br1 type bridge vlan_filtering 1
+	ip link set dev br1 up
+
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+
+	tc qdisc add dev $swp1 clsact
+
+	# Underlay.
+
+	simple_if_init $swp3 192.0.2.129/28 2001:db8:2::1/64
+
+	ip link add name ul type dummy
+	ip link set dev ul master v$swp3
+	ip link set dev ul up
+
+	# Overlay.
+
+	vrf_create vrf-ol
+	ip link set dev vrf-ol up
+
+	tunnel_create gt4 gretap 192.0.2.129 192.0.2.130 \
+		      ttl 100 tos inherit dev ul
+	ip link set dev gt4 master vrf-ol
+	ip link set dev gt4 up
+
+	tunnel_create gt6 ip6gretap 2001:db8:2::1 2001:db8:2::2 \
+		      ttl 100 tos inherit dev ul allow-localremote
+	ip link set dev gt6 master vrf-ol
+	ip link set dev gt6 up
+}
+
+switch_destroy()
+{
+	vrf_destroy vrf-ol
+
+	tunnel_destroy gt6
+	tunnel_destroy gt4
+
+	simple_if_fini $swp3 192.0.2.129/28 2001:db8:2::1/64
+
+	ip link del dev ul
+
+	tc qdisc del dev $swp1 clsact
+
+	ip link set dev $swp1 down
+	ip link set dev $swp2 down
+	ip link del dev br1
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+	h3_create
+
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+
+	h3_destroy
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+test_all()
+{
+	RET=0
+
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	full_test_span_gre_dir gt4 ingress 8 0 "mirror to gretap w/ UL"
+	full_test_span_gre_dir gt6 ingress 8 0 "mirror to ip6gretap w/ UL"
+
+	full_test_span_gre_dir gt4 egress  0 8 "mirror to gretap w/ UL"
+	full_test_span_gre_dir gt6 egress  0 8 "mirror to ip6gretap w/ UL"
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	test_all
+fi
+
+exit $EXIT_STATUS

tools/testing/selftests/net/forwarding/mirror_gre_changes.sh

+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test uses standard topology for testing gretap. See
+# mirror_gre_topo_lib.sh for more details.
+#
+# Test how mirrors to gretap and ip6gretap react to changes to relevant
+# configuration.
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+source mirror_gre_topo_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+	mirror_gre_topo_create
+
+	# This test downs $swp3, which deletes the configured IPv6 address
+	# unless this sysctl is set.
+	local key=net.ipv6.conf.$swp3.keep_addr_on_down
+	SWP3_KEEP_ADDR_ON_DOWN=$(sysctl -n $key)
+	sysctl -qw $key=1
+
+	ip address add dev $swp3 192.0.2.129/28
+	ip address add dev $h3 192.0.2.130/28
+
+	ip address add dev $swp3 2001:db8:2::1/64
+	ip address add dev $h3 2001:db8:2::2/64
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ip address del dev $h3 2001:db8:2::2/64
+	ip address del dev $swp3 2001:db8:2::1/64
+
+	ip address del dev $h3 192.0.2.130/28
+	ip address del dev $swp3 192.0.2.129/28
+
+	local key=net.ipv6.conf.$swp3.keep_addr_on_down
+	sysctl -qw $key=$SWP3_KEEP_ADDR_ON_DOWN
+
+	mirror_gre_topo_destroy
+	vrf_cleanup
+}
+
+test_span_gre_ttl()
+{
+	local tundev=$1; shift
+	local type=$1; shift
+	local prot=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	mirror_install $swp1 ingress $tundev "matchall $tcflags"
+	tc qdisc add dev $h3 clsact
+	tc filter add dev $h3 ingress pref 77 prot $prot \
+		flower ip_ttl 50 action pass
+
+	mirror_test v$h1 192.0.2.1 192.0.2.2 $h3 77 0
+
+	ip link set dev $tundev type $type ttl 50
+	mirror_test v$h1 192.0.2.1 192.0.2.2 $h3 77 10
+
+	ip link set dev $tundev type $type ttl 100
+	tc filter del dev $h3 ingress pref 77
+	tc qdisc del dev $h3 clsact
+	mirror_uninstall $swp1 ingress
+
+	log_test "$what: TTL change ($tcflags)"
+}
+
+test_span_gre_tun_up()
+{
+	local tundev=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	ip link set dev $tundev down
+	mirror_install $swp1 ingress $tundev "matchall $tcflags"
+	fail_test_span_gre_dir $tundev ingress
+
+	ip link set dev $tundev up
+
+	quick_test_span_gre_dir $tundev ingress
+	mirror_uninstall $swp1 ingress
+
+	log_test "$what: tunnel down/up ($tcflags)"
+}
+
+test_span_gre_egress_up()
+{
+	local tundev=$1; shift
+	local remote_ip=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	ip link set dev $swp3 down
+	mirror_install $swp1 ingress $tundev "matchall $tcflags"
+	fail_test_span_gre_dir $tundev ingress
+
+	# After setting the device up, wait for neighbor to get resolved so that
+	# we can expect mirroring to work.
+	ip link set dev $swp3 up
+	while true; do
+		ip neigh sh dev $swp3 $remote_ip nud reachable |
+		    grep -q ^
+		if [[ $? -ne 0 ]]; then
+			sleep 1
+		else
+			break
+		fi
+	done
+
+	quick_test_span_gre_dir $tundev ingress
+	mirror_uninstall $swp1 ingress
+
+	log_test "$what: egress down/up ($tcflags)"
+}
+
+test_span_gre_remote_ip()
+{
+	local tundev=$1; shift
+	local type=$1; shift
+	local correct_ip=$1; shift
+	local wrong_ip=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	ip link set dev $tundev type $type remote $wrong_ip
+	mirror_install $swp1 ingress $tundev "matchall $tcflags"
+	fail_test_span_gre_dir $tundev ingress
+
+	ip link set dev $tundev type $type remote $correct_ip
+	quick_test_span_gre_dir $tundev ingress
+	mirror_uninstall $swp1 ingress
+
+	log_test "$what: remote address change ($tcflags)"
+}
+
+test_all()
+{
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	test_span_gre_ttl gt4 gretap ip "mirror to gretap"
+	test_span_gre_ttl gt6 ip6gretap ipv6 "mirror to ip6gretap"
+
+	test_span_gre_tun_up gt4 "mirror to gretap"
+	test_span_gre_tun_up gt6 "mirror to ip6gretap"
+
+	test_span_gre_egress_up gt4 192.0.2.130 "mirror to gretap"
+	test_span_gre_egress_up gt6 2001:db8:2::2 "mirror to ip6gretap"
+
+	test_span_gre_remote_ip gt4 gretap 192.0.2.130 192.0.2.132 "mirror to gretap"
+	test_span_gre_remote_ip gt6 ip6gretap 2001:db8:2::2 2001:db8:2::4 "mirror to ip6gretap"
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	test_all
+fi
+
+exit $EXIT_STATUS

tools/testing/selftests/net/forwarding/mirror_gre_flower.sh

+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test uses standard topology for testing gretap. See
+# mirror_gre_topo_lib.sh for more details.
+#
+# This tests flower-triggered mirroring to gretap and ip6gretap netdevices. The
+# interfaces on H1 and H2 have two addresses each. Flower match on one of the
+# addresses is configured with mirror action. It is expected that when pinging
+# this address, mirroring takes place, whereas when pinging the other one,
+# there's no mirroring.
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+source mirror_gre_topo_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+	mirror_gre_topo_create
+
+	ip address add dev $swp3 192.0.2.129/28
+	ip address add dev $h3 192.0.2.130/28
+
+	ip address add dev $swp3 2001:db8:2::1/64
+	ip address add dev $h3 2001:db8:2::2/64
+
+	ip address add dev $h1 192.0.2.3/28
+	ip address add dev $h2 192.0.2.4/28
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ip address del dev $h2 192.0.2.4/28
+	ip address del dev $h1 192.0.2.3/28
+
+	ip address del dev $h3 2001:db8:2::2/64
+	ip address del dev $swp3 2001:db8:2::1/64
+
+	ip address del dev $h3 192.0.2.130/28
+	ip address del dev $swp3 192.0.2.129/28
+
+	mirror_gre_topo_destroy
+	vrf_cleanup
+}
+
+test_span_gre_dir_acl()
+{
+	test_span_gre_dir_ips "$@" 192.0.2.3 192.0.2.4
+}
+
+full_test_span_gre_dir_acl()
+{
+	local tundev=$1; shift
+	local direction=$1; shift
+	local forward_type=$1; shift
+	local backward_type=$1; shift
+	local match_dip=$1; shift
+	local what=$1; shift
+
+	mirror_install $swp1 $direction $tundev \
+		       "protocol ip flower $tcflags dst_ip $match_dip"
+	fail_test_span_gre_dir $tundev $direction
+	test_span_gre_dir_acl "$tundev" "$direction" \
+			  "$forward_type" "$backward_type"
+	mirror_uninstall $swp1 $direction
+
+	log_test "$direction $what ($tcflags)"
+}
+
+test_all()
+{
+	RET=0
+
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	full_test_span_gre_dir_acl gt4 ingress 8 0 192.0.2.4 "ACL mirror to gretap"
+	full_test_span_gre_dir_acl gt6 ingress 8 0 192.0.2.4 "ACL mirror to ip6gretap"
+
+	full_test_span_gre_dir_acl gt4 egress 0 8 192.0.2.3 "ACL mirror to gretap"
+	full_test_span_gre_dir_acl gt6 egress 0 8 192.0.2.3 "ACL mirror to ip6gretap"
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	test_all
+fi
+
+exit $EXIT_STATUS

tools/testing/selftests/net/forwarding/mirror_gre_lib.sh

+# SPDX-License-Identifier: GPL-2.0
+
+do_test_span_gre_dir_ips()
+{
+	local expect=$1; shift
+	local tundev=$1; shift
+	local direction=$1; shift
+	local ip1=$1; shift
+	local ip2=$1; shift
+
+	icmp_capture_install h3-$tundev
+	mirror_test v$h1 $ip1 $ip2 h3-$tundev 100 $expect
+	mirror_test v$h2 $ip2 $ip1 h3-$tundev 100 $expect
+	icmp_capture_uninstall h3-$tundev
+}
+
+quick_test_span_gre_dir_ips()
+{
+	do_test_span_gre_dir_ips 10 "$@"
+}
+
+fail_test_span_gre_dir_ips()
+{
+	do_test_span_gre_dir_ips 0 "$@"
+}
+
+test_span_gre_dir_ips()
+{
+	local tundev=$1; shift
+	local direction=$1; shift
+	local forward_type=$1; shift
+	local backward_type=$1; shift
+	local ip1=$1; shift
+	local ip2=$1; shift
+
+	quick_test_span_gre_dir_ips "$tundev" "$direction" "$ip1" "$ip2"
+
+	icmp_capture_install h3-$tundev "type $forward_type"
+	mirror_test v$h1 $ip1 $ip2 h3-$tundev 100 10
+	icmp_capture_uninstall h3-$tundev
+
+	icmp_capture_install h3-$tundev "type $backward_type"
+	mirror_test v$h2 $ip2 $ip1 h3-$tundev 100 10
+	icmp_capture_uninstall h3-$tundev
+}
+
+full_test_span_gre_dir_ips()
+{
+	local tundev=$1; shift
+	local direction=$1; shift
+	local forward_type=$1; shift
+	local backward_type=$1; shift
+	local what=$1; shift
+	local ip1=$1; shift
+	local ip2=$1; shift
+
+	RET=0
+
+	mirror_install $swp1 $direction $tundev "matchall $tcflags"
+	test_span_gre_dir_ips "$tundev" "$direction" "$forward_type" \
+			      "$backward_type" "$ip1" "$ip2"
+	mirror_uninstall $swp1 $direction
+
+	log_test "$direction $what ($tcflags)"
+}
+
+quick_test_span_gre_dir()
+{
+	quick_test_span_gre_dir_ips "$@" 192.0.2.1 192.0.2.2
+}
+
+fail_test_span_gre_dir()
+{
+	fail_test_span_gre_dir_ips "$@" 192.0.2.1 192.0.2.2
+}
+
+test_span_gre_dir()
+{
+	test_span_gre_dir_ips "$@" 192.0.2.1 192.0.2.2
+}
+
+full_test_span_gre_dir()
+{
+	full_test_span_gre_dir_ips "$@" 192.0.2.1 192.0.2.2
+}

tools/testing/selftests/net/forwarding/mirror_gre_neigh.sh

+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test uses standard topology for testing gretap. See
+# mirror_gre_topo_lib.sh for more details.
+#
+# Test for mirroring to gretap and ip6gretap, such that the neighbor entry for
+# the tunnel remote address has invalid address at the time that the mirroring
+# is set up. Later on, the neighbor is deleted and it is expected to be
+# reinitialized using the usual ARP process, and the mirroring offload updated.
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+source mirror_gre_topo_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+	mirror_gre_topo_create
+
+	ip address add dev $swp3 192.0.2.129/28
+	ip address add dev $h3 192.0.2.130/28
+
+	ip address add dev $swp3 2001:db8:2::1/64
+	ip address add dev $h3 2001:db8:2::2/64
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ip address del dev $h3 2001:db8:2::2/64
+	ip address del dev $swp3 2001:db8:2::1/64
+
+	ip address del dev $h3 192.0.2.130/28
+	ip address del dev $swp3 192.0.2.129/28
+
+	mirror_gre_topo_destroy
+	vrf_cleanup
+}
+
+test_span_gre_neigh()
+{
+	local addr=$1; shift
+	local tundev=$1; shift
+	local direction=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	ip neigh replace dev $swp3 $addr lladdr 00:11:22:33:44:55
+	mirror_install $swp1 $direction $tundev "matchall $tcflags"
+	fail_test_span_gre_dir $tundev ingress
+	ip neigh del dev $swp3 $addr
+	quick_test_span_gre_dir $tundev ingress
+	mirror_uninstall $swp1 $direction
+
+	log_test "$direction $what: neighbor change ($tcflags)"
+}
+
+test_all()
+{
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	test_span_gre_neigh 192.0.2.130 gt4 ingress "mirror to gretap"
+	test_span_gre_neigh 192.0.2.130 gt4 egress "mirror to gretap"
+	test_span_gre_neigh 2001:db8:2::2 gt6 ingress "mirror to ip6gretap"
+	test_span_gre_neigh 2001:db8:2::2 gt6 egress "mirror to ip6gretap"
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	test_all
+fi
+
+exit $EXIT_STATUS

tools/testing/selftests/net/forwarding/mirror_gre_nh.sh

+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test uses standard topology for testing gretap. See
+# mirror_gre_topo_lib.sh for more details.
+#
+# Test that gretap and ip6gretap mirroring works when the other tunnel endpoint
+# is reachable through a next-hop route (as opposed to directly-attached route).
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+source mirror_gre_topo_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+	mirror_gre_topo_create
+
+	ip address add dev $swp3 192.0.2.161/28
+	ip address add dev $h3 192.0.2.162/28
+	ip address add dev gt4 192.0.2.129/32
+	ip address add dev h3-gt4 192.0.2.130/32
+
+	# IPv6 route can't be added after address. Such routes are rejected due
+	# to the gateway address having been configured on the local system. It
+	# works the other way around though.
+	ip address add dev $swp3 2001:db8:4::1/64
+	ip -6 route add 2001:db8:2::2/128 via 2001:db8:4::2
+	ip address add dev $h3 2001:db8:4::2/64
+	ip address add dev gt6 2001:db8:2::1
+	ip address add dev h3-gt6 2001:db8:2::2
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ip -6 route del 2001:db8:2::2/128 via 2001:db8:4::2
+	ip address del dev $h3 2001:db8:4::2/64
+	ip address del dev $swp3 2001:db8:4::1/64
+
+	ip address del dev $h3 192.0.2.162/28
+	ip address del dev $swp3 192.0.2.161/28
+
+	mirror_gre_topo_destroy
+	vrf_cleanup
+}
+
+test_gretap()
+{
+	RET=0
+	mirror_install $swp1 ingress gt4 "matchall $tcflags"
+
+	# For IPv4, test that there's no mirroring without the route directing
+	# the traffic to tunnel remote address. Then add it and test that
+	# mirroring starts. For IPv6 we can't test this due to the limitation
+	# that routes for locally-specified IPv6 addresses can't be added.
+	fail_test_span_gre_dir gt4 ingress
+
+	ip route add 192.0.2.130/32 via 192.0.2.162
+	quick_test_span_gre_dir gt4 ingress
+	ip route del 192.0.2.130/32 via 192.0.2.162
+
+	mirror_uninstall $swp1 ingress
+	log_test "mirror to gre with next-hop remote ($tcflags)"
+}
+
+test_ip6gretap()
+{
+	RET=0
+
+	mirror_install $swp1 ingress gt6 "matchall $tcflags"
+	quick_test_span_gre_dir gt6 ingress
+	mirror_uninstall $swp1 ingress
+
+	log_test "mirror to ip6gre with next-hop remote ($tcflags)"
+}
+
+test_all()
+{
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	test_gretap
+	test_ip6gretap
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	test_all
+fi
+
+exit $EXIT_STATUS

tools/testing/selftests/net/forwarding/mirror_gre_topo_lib.sh

+# SPDX-License-Identifier: GPL-2.0
+
+# This is the standard topology for testing mirroring to gretap and ip6gretap
+# netdevices. The tests that use it tweak it in one way or another--importantly,
+# $swp3 and $h3 need to have addresses set up.
+#
+#   +---------------------+                             +---------------------+
+#   | H1                  |                             |                  H2 |
+#   |     + $h1           |                             |           $h2 +     |
+#   |     | 192.0.2.1/28  |                             |  192.0.2.2/28 |     |
+#   +-----|---------------+                             +---------------|-----+
+#         |                                                             |
+#   +-----|-------------------------------------------------------------|-----+
+#   | SW  o--> mirror                                                   |     |
+#   | +---|-------------------------------------------------------------|---+ |
+#   | |   + $swp1                    BR                           $swp2 +   | |
+#   | +---------------------------------------------------------------------+ |
+#   |                                                                         |
+#   |     + $swp3               + gt6 (ip6gretap)      + gt4 (gretap)         |
+#   |     |                     : loc=2001:db8:2::1    : loc=192.0.2.129      |
+#   |     |                     : rem=2001:db8:2::2    : rem=192.0.2.130      |
+#   |     |                     : ttl=100              : ttl=100              |
+#   |     |                     : tos=inherit          : tos=inherit          |
+#   |     |                     :                      :                      |
+#   +-----|---------------------:----------------------:----------------------+
+#         |                     :                      :
+#   +-----|---------------------:----------------------:----------------------+
+#   | H3  + $h3                 + h3-gt6 (ip6gretap)   + h3-gt4 (gretap)      |
+#   |                             loc=2001:db8:2::2      loc=192.0.2.130      |
+#   |                             rem=2001:db8:2::1      rem=192.0.2.129      |
+#   |                             ttl=100                ttl=100              |
+#   |                             tos=inherit            tos=inherit          |
+#   |                                                                         |
+#   +-------------------------------------------------------------------------+
+
+mirror_gre_topo_h1_create()
+{
+	simple_if_init $h1 192.0.2.1/28
+}
+
+mirror_gre_topo_h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/28
+}
+
+mirror_gre_topo_h2_create()
+{
+	simple_if_init $h2 192.0.2.2/28
+}
+
+mirror_gre_topo_h2_destroy()
+{
+	simple_if_fini $h2 192.0.2.2/28
+}
+
+mirror_gre_topo_h3_create()
+{
+	simple_if_init $h3
+
+	tunnel_create h3-gt4 gretap 192.0.2.130 192.0.2.129
+	ip link set h3-gt4 vrf v$h3
+	matchall_sink_create h3-gt4
+
+	tunnel_create h3-gt6 ip6gretap 2001:db8:2::2 2001:db8:2::1
+	ip link set h3-gt6 vrf v$h3
+	matchall_sink_create h3-gt6
+}
+
+mirror_gre_topo_h3_destroy()
+{
+	tunnel_destroy h3-gt6
+	tunnel_destroy h3-gt4
+
+	simple_if_fini $h3
+}
+
+mirror_gre_topo_switch_create()
+{
+	ip link set dev $swp3 up
+
+	ip link add name br1 type bridge vlan_filtering 1
+	ip link set dev br1 up
+
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+
+	tunnel_create gt4 gretap 192.0.2.129 192.0.2.130 \
+		      ttl 100 tos inherit
+
+	tunnel_create gt6 ip6gretap 2001:db8:2::1 2001:db8:2::2 \
+		      ttl 100 tos inherit allow-localremote
+
+	tc qdisc add dev $swp1 clsact
+}
+
+mirror_gre_topo_switch_destroy()
+{
+	tc qdisc del dev $swp1 clsact
+
+	tunnel_destroy gt6
+	tunnel_destroy gt4
+
+	ip link set dev $swp1 down
+	ip link set dev $swp2 down
+	ip link del dev br1
+
+	ip link set dev $swp3 down
+}
+
+mirror_gre_topo_create()
+{
+	mirror_gre_topo_h1_create
+	mirror_gre_topo_h2_create
+	mirror_gre_topo_h3_create
+
+	mirror_gre_topo_switch_create
+}
+
+mirror_gre_topo_destroy()
+{
+	mirror_gre_topo_switch_destroy
+
+	mirror_gre_topo_h3_destroy
+	mirror_gre_topo_h2_destroy
+	mirror_gre_topo_h1_destroy
+}

tools/testing/selftests/net/forwarding/mirror_lib.sh

+# SPDX-License-Identifier: GPL-2.0
+
+mirror_install()
+{
+	local from_dev=$1; shift
+	local direction=$1; shift
+	local to_dev=$1; shift
+	local filter=$1; shift
+
+	tc filter add dev $from_dev $direction \
+	   pref 1000 $filter \
+	   action mirred egress mirror dev $to_dev
+}
+
+mirror_uninstall()
+{
+	local from_dev=$1; shift
+	local direction=$1; shift
+
+	tc filter del dev $swp1 $direction pref 1000
+}
+
+mirror_test()
+{
+	local vrf_name=$1; shift
+	local sip=$1; shift
+	local dip=$1; shift
+	local dev=$1; shift
+	local pref=$1; shift
+	local expect=$1; shift
+
+	local t0=$(tc_rule_stats_get $dev $pref)
+	ip vrf exec $vrf_name \
+	   ${PING} ${sip:+-I $sip} $dip -c 10 -i 0.1 -w 2 &> /dev/null
+	local t1=$(tc_rule_stats_get $dev $pref)
+	local delta=$((t1 - t0))
+	# Tolerate a couple stray extra packets.
+	((expect <= delta && delta <= expect + 2))
+	check_err $? "Expected to capture $expect packets, got $delta."
+}