usb: mtu3: add a new function to do status stage

Exact a new static function to do status stage
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

drivers/usb/mtu3/mtu3_gadget_ep0.c

@@ -153,6 +153,15 @@ static void ep0_stall_set(struct mtu3_ep *mep0, bool set, u32 pktrdy)
 		set ? "SEND" : "CLEAR", decode_ep0_state(mtu));
 }
 
+static void ep0_do_status_stage(struct mtu3 *mtu)
+{
+	void __iomem *mbase = mtu->mac_base;
+	u32 value;
+
+	value = mtu3_readl(mbase, U3D_EP0CSR) & EP0_W1C_BITS;
+	mtu3_writel(mbase, U3D_EP0CSR, value | EP0_SETUPPKTRDY | EP0_DATAEND);
+}
+
 static int ep0_queue(struct mtu3_ep *mep0, struct mtu3_request *mreq);
 
 static void ep0_dummy_complete(struct usb_ep *ep, struct usb_request *req)
@@ -297,8 +306,7 @@ static int handle_test_mode(struct mtu3 *mtu, struct usb_ctrlrequest *setup)
 		ep0_load_test_packet(mtu);
 
 	/* send status before entering test mode. */
-	value = mtu3_readl(mbase, U3D_EP0CSR) & EP0_W1C_BITS;
-	mtu3_writel(mbase, U3D_EP0CSR, value | EP0_SETUPPKTRDY | EP0_DATAEND);
+	ep0_do_status_stage(mtu);
 
 	/* wait for ACK status sent by host */
 	readl_poll_timeout_atomic(mbase + U3D_EP0CSR, value,
@@ -632,7 +640,6 @@ __acquires(mtu->lock)
 {
 	struct usb_ctrlrequest setup;
 	struct mtu3_request *mreq;
-	void __iomem *mbase = mtu->mac_base;
 	int handled = 0;
 
 	ep0_read_setup(mtu, &setup);
@@ -668,10 +675,7 @@ __acquires(mtu->lock)
 		mtu->delayed_status = true;
 	} else if (le16_to_cpu(setup.wLength) == 0) { /* no data stage */
 
-		mtu3_writel(mbase, U3D_EP0CSR,
-			(mtu3_readl(mbase, U3D_EP0CSR) & EP0_W1C_BITS)
-			| EP0_SETUPPKTRDY | EP0_DATAEND);
-
+		ep0_do_status_stage(mtu);
 		/* complete zlp request directly */
 		mreq = next_ep0_request(mtu);
 		if (mreq && !mreq->request.length)
@@ -802,12 +806,9 @@ static int ep0_queue(struct mtu3_ep *mep, struct mtu3_request *mreq)
 	}
 
 	if (mtu->delayed_status) {
-		u32 csr;
 
 		mtu->delayed_status = false;
-		csr = mtu3_readl(mtu->mac_base, U3D_EP0CSR) & EP0_W1C_BITS;
-		csr |= EP0_SETUPPKTRDY | EP0_DATAEND;
-		mtu3_writel(mtu->mac_base, U3D_EP0CSR, csr);
+		ep0_do_status_stage(mtu);
 		/* needn't giveback the request for handling delay STATUS */
 		return 0;
 	}