Commit e72394e2 authored by Paul Cercueil's avatar Paul Cercueil Committed by Linus Walleij

pinctrl: ingenic: Merge GPIO functionality

Merge the code of the gpio-ingenic driver into the pinctrl-ingenic
driver.

The reason behind this, is that the same hardware block handles both pin
config / muxing and GPIO.

ingenic_gpio_probe() have been marked as __init, but for the most part,
the code is the exact same as what it was in the gpio-ingenic driver.
Signed-off-by: default avatarPaul Cercueil <paul@crapouillou.net>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 4717b11f
...@@ -315,6 +315,8 @@ config PINCTRL_INGENIC ...@@ -315,6 +315,8 @@ config PINCTRL_INGENIC
select GENERIC_PINCONF select GENERIC_PINCONF
select GENERIC_PINCTRL_GROUPS select GENERIC_PINCTRL_GROUPS
select GENERIC_PINMUX_FUNCTIONS select GENERIC_PINMUX_FUNCTIONS
select GPIOLIB
select GPIOLIB_IRQCHIP
select REGMAP_MMIO select REGMAP_MMIO
config PINCTRL_RK805 config PINCTRL_RK805
......
...@@ -11,6 +11,7 @@ ...@@ -11,6 +11,7 @@
#include <linux/interrupt.h> #include <linux/interrupt.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/of_device.h> #include <linux/of_device.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h> #include <linux/of_platform.h>
#include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinmux.h> #include <linux/pinctrl/pinmux.h>
...@@ -24,6 +25,9 @@ ...@@ -24,6 +25,9 @@
#include "pinconf.h" #include "pinconf.h"
#include "pinmux.h" #include "pinmux.h"
#define GPIO_PIN 0x00
#define GPIO_MSK 0x20
#define JZ4740_GPIO_DATA 0x10 #define JZ4740_GPIO_DATA 0x10
#define JZ4740_GPIO_PULL_DIS 0x30 #define JZ4740_GPIO_PULL_DIS 0x30
#define JZ4740_GPIO_FUNC 0x40 #define JZ4740_GPIO_FUNC 0x40
...@@ -33,7 +37,6 @@ ...@@ -33,7 +37,6 @@
#define JZ4740_GPIO_FLAG 0x80 #define JZ4740_GPIO_FLAG 0x80
#define JZ4770_GPIO_INT 0x10 #define JZ4770_GPIO_INT 0x10
#define JZ4770_GPIO_MSK 0x20
#define JZ4770_GPIO_PAT1 0x30 #define JZ4770_GPIO_PAT1 0x30
#define JZ4770_GPIO_PAT0 0x40 #define JZ4770_GPIO_PAT0 0x40
#define JZ4770_GPIO_FLAG 0x50 #define JZ4770_GPIO_FLAG 0x50
...@@ -72,6 +75,13 @@ struct ingenic_pinctrl { ...@@ -72,6 +75,13 @@ struct ingenic_pinctrl {
const struct ingenic_chip_info *info; const struct ingenic_chip_info *info;
}; };
struct ingenic_gpio_chip {
struct ingenic_pinctrl *jzpc;
struct gpio_chip gc;
struct irq_chip irq_chip;
unsigned int irq, reg_base;
};
static const u32 jz4740_pull_ups[4] = { static const u32 jz4740_pull_ups[4] = {
0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
}; };
...@@ -438,6 +448,235 @@ static const struct ingenic_chip_info jz4770_chip_info = { ...@@ -438,6 +448,235 @@ static const struct ingenic_chip_info jz4770_chip_info = {
.pull_downs = jz4770_pull_downs, .pull_downs = jz4770_pull_downs,
}; };
static u32 gpio_ingenic_read_reg(struct ingenic_gpio_chip *jzgc, u8 reg)
{
unsigned int val;
regmap_read(jzgc->jzpc->map, jzgc->reg_base + reg, &val);
return (u32) val;
}
static void gpio_ingenic_set_bit(struct ingenic_gpio_chip *jzgc,
u8 reg, u8 offset, bool set)
{
if (set)
reg = REG_SET(reg);
else
reg = REG_CLEAR(reg);
regmap_write(jzgc->jzpc->map, jzgc->reg_base + reg, BIT(offset));
}
static inline bool ingenic_gpio_get_value(struct ingenic_gpio_chip *jzgc,
u8 offset)
{
unsigned int val = gpio_ingenic_read_reg(jzgc, GPIO_PIN);
return !!(val & BIT(offset));
}
static void ingenic_gpio_set_value(struct ingenic_gpio_chip *jzgc,
u8 offset, int value)
{
if (jzgc->jzpc->version >= ID_JZ4770)
gpio_ingenic_set_bit(jzgc, JZ4770_GPIO_PAT0, offset, !!value);
else
gpio_ingenic_set_bit(jzgc, JZ4740_GPIO_DATA, offset, !!value);
}
static void irq_set_type(struct ingenic_gpio_chip *jzgc,
u8 offset, unsigned int type)
{
u8 reg1, reg2;
if (jzgc->jzpc->version >= ID_JZ4770) {
reg1 = JZ4770_GPIO_PAT1;
reg2 = JZ4770_GPIO_PAT0;
} else {
reg1 = JZ4740_GPIO_TRIG;
reg2 = JZ4740_GPIO_DIR;
}
switch (type) {
case IRQ_TYPE_EDGE_RISING:
gpio_ingenic_set_bit(jzgc, reg2, offset, true);
gpio_ingenic_set_bit(jzgc, reg1, offset, true);
break;
case IRQ_TYPE_EDGE_FALLING:
gpio_ingenic_set_bit(jzgc, reg2, offset, false);
gpio_ingenic_set_bit(jzgc, reg1, offset, true);
break;
case IRQ_TYPE_LEVEL_HIGH:
gpio_ingenic_set_bit(jzgc, reg2, offset, true);
gpio_ingenic_set_bit(jzgc, reg1, offset, false);
break;
case IRQ_TYPE_LEVEL_LOW:
default:
gpio_ingenic_set_bit(jzgc, reg2, offset, false);
gpio_ingenic_set_bit(jzgc, reg1, offset, false);
break;
}
}
static void ingenic_gpio_irq_mask(struct irq_data *irqd)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
gpio_ingenic_set_bit(jzgc, GPIO_MSK, irqd->hwirq, true);
}
static void ingenic_gpio_irq_unmask(struct irq_data *irqd)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
gpio_ingenic_set_bit(jzgc, GPIO_MSK, irqd->hwirq, false);
}
static void ingenic_gpio_irq_enable(struct irq_data *irqd)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
int irq = irqd->hwirq;
if (jzgc->jzpc->version >= ID_JZ4770)
gpio_ingenic_set_bit(jzgc, JZ4770_GPIO_INT, irq, true);
else
gpio_ingenic_set_bit(jzgc, JZ4740_GPIO_SELECT, irq, true);
ingenic_gpio_irq_unmask(irqd);
}
static void ingenic_gpio_irq_disable(struct irq_data *irqd)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
int irq = irqd->hwirq;
ingenic_gpio_irq_mask(irqd);
if (jzgc->jzpc->version >= ID_JZ4770)
gpio_ingenic_set_bit(jzgc, JZ4770_GPIO_INT, irq, false);
else
gpio_ingenic_set_bit(jzgc, JZ4740_GPIO_SELECT, irq, false);
}
static void ingenic_gpio_irq_ack(struct irq_data *irqd)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
int irq = irqd->hwirq;
bool high;
if (irqd_get_trigger_type(irqd) == IRQ_TYPE_EDGE_BOTH) {
/*
* Switch to an interrupt for the opposite edge to the one that
* triggered the interrupt being ACKed.
*/
high = ingenic_gpio_get_value(jzgc, irq);
if (high)
irq_set_type(jzgc, irq, IRQ_TYPE_EDGE_FALLING);
else
irq_set_type(jzgc, irq, IRQ_TYPE_EDGE_RISING);
}
if (jzgc->jzpc->version >= ID_JZ4770)
gpio_ingenic_set_bit(jzgc, JZ4770_GPIO_FLAG, irq, false);
else
gpio_ingenic_set_bit(jzgc, JZ4740_GPIO_DATA, irq, true);
}
static int ingenic_gpio_irq_set_type(struct irq_data *irqd, unsigned int type)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
switch (type) {
case IRQ_TYPE_EDGE_BOTH:
case IRQ_TYPE_EDGE_RISING:
case IRQ_TYPE_EDGE_FALLING:
irq_set_handler_locked(irqd, handle_edge_irq);
break;
case IRQ_TYPE_LEVEL_HIGH:
case IRQ_TYPE_LEVEL_LOW:
irq_set_handler_locked(irqd, handle_level_irq);
break;
default:
irq_set_handler_locked(irqd, handle_bad_irq);
}
if (type == IRQ_TYPE_EDGE_BOTH) {
/*
* The hardware does not support interrupts on both edges. The
* best we can do is to set up a single-edge interrupt and then
* switch to the opposing edge when ACKing the interrupt.
*/
bool high = ingenic_gpio_get_value(jzgc, irqd->hwirq);
type = high ? IRQ_TYPE_EDGE_FALLING : IRQ_TYPE_EDGE_RISING;
}
irq_set_type(jzgc, irqd->hwirq, type);
return 0;
}
static int ingenic_gpio_irq_set_wake(struct irq_data *irqd, unsigned int on)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
return irq_set_irq_wake(jzgc->irq, on);
}
static void ingenic_gpio_irq_handler(struct irq_desc *desc)
{
struct gpio_chip *gc = irq_desc_get_handler_data(desc);
struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
struct irq_chip *irq_chip = irq_data_get_irq_chip(&desc->irq_data);
unsigned long flag, i;
chained_irq_enter(irq_chip, desc);
if (jzgc->jzpc->version >= ID_JZ4770)
flag = gpio_ingenic_read_reg(jzgc, JZ4770_GPIO_FLAG);
else
flag = gpio_ingenic_read_reg(jzgc, JZ4740_GPIO_FLAG);
for_each_set_bit(i, &flag, 32)
generic_handle_irq(irq_linear_revmap(gc->irq.domain, i));
chained_irq_exit(irq_chip, desc);
}
static void ingenic_gpio_set(struct gpio_chip *gc,
unsigned int offset, int value)
{
struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
ingenic_gpio_set_value(jzgc, offset, value);
}
static int ingenic_gpio_get(struct gpio_chip *gc, unsigned int offset)
{
struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
return (int) ingenic_gpio_get_value(jzgc, offset);
}
static int ingenic_gpio_direction_input(struct gpio_chip *gc,
unsigned int offset)
{
return pinctrl_gpio_direction_input(gc->base + offset);
}
static int ingenic_gpio_direction_output(struct gpio_chip *gc,
unsigned int offset, int value)
{
ingenic_gpio_set(gc, offset, value);
return pinctrl_gpio_direction_output(gc->base + offset);
}
static inline void ingenic_config_pin(struct ingenic_pinctrl *jzpc, static inline void ingenic_config_pin(struct ingenic_pinctrl *jzpc,
unsigned int pin, u8 reg, bool set) unsigned int pin, u8 reg, bool set)
{ {
...@@ -479,7 +718,7 @@ static int ingenic_pinmux_set_pin_fn(struct ingenic_pinctrl *jzpc, ...@@ -479,7 +718,7 @@ static int ingenic_pinmux_set_pin_fn(struct ingenic_pinctrl *jzpc,
if (jzpc->version >= ID_JZ4770) { if (jzpc->version >= ID_JZ4770) {
ingenic_config_pin(jzpc, pin, JZ4770_GPIO_INT, false); ingenic_config_pin(jzpc, pin, JZ4770_GPIO_INT, false);
ingenic_config_pin(jzpc, pin, JZ4770_GPIO_MSK, false); ingenic_config_pin(jzpc, pin, GPIO_MSK, false);
ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PAT1, func & 0x2); ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PAT1, func & 0x2);
ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PAT0, func & 0x1); ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PAT0, func & 0x1);
} else { } else {
...@@ -532,7 +771,7 @@ static int ingenic_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev, ...@@ -532,7 +771,7 @@ static int ingenic_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev,
if (jzpc->version >= ID_JZ4770) { if (jzpc->version >= ID_JZ4770) {
ingenic_config_pin(jzpc, pin, JZ4770_GPIO_INT, false); ingenic_config_pin(jzpc, pin, JZ4770_GPIO_INT, false);
ingenic_config_pin(jzpc, pin, JZ4770_GPIO_MSK, true); ingenic_config_pin(jzpc, pin, GPIO_MSK, true);
ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PAT1, input); ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PAT1, input);
} else { } else {
ingenic_config_pin(jzpc, pin, JZ4740_GPIO_SELECT, false); ingenic_config_pin(jzpc, pin, JZ4740_GPIO_SELECT, false);
...@@ -717,6 +956,87 @@ static const struct of_device_id ingenic_pinctrl_of_match[] = { ...@@ -717,6 +956,87 @@ static const struct of_device_id ingenic_pinctrl_of_match[] = {
{}, {},
}; };
static const struct of_device_id ingenic_gpio_of_match[] __initconst = {
{ .compatible = "ingenic,jz4740-gpio", },
{ .compatible = "ingenic,jz4770-gpio", },
{ .compatible = "ingenic,jz4780-gpio", },
{},
};
static int __init ingenic_gpio_probe(struct ingenic_pinctrl *jzpc,
struct device_node *node)
{
struct ingenic_gpio_chip *jzgc;
struct device *dev = jzpc->dev;
unsigned int bank;
int err;
err = of_property_read_u32(node, "reg", &bank);
if (err) {
dev_err(dev, "Cannot read \"reg\" property: %i\n", err);
return err;
}
jzgc = devm_kzalloc(dev, sizeof(*jzgc), GFP_KERNEL);
if (!jzgc)
return -ENOMEM;
jzgc->jzpc = jzpc;
jzgc->reg_base = bank * 0x100;
jzgc->gc.label = devm_kasprintf(dev, GFP_KERNEL, "GPIO%c", 'A' + bank);
if (!jzgc->gc.label)
return -ENOMEM;
/* DO NOT EXPAND THIS: FOR BACKWARD GPIO NUMBERSPACE COMPATIBIBILITY
* ONLY: WORK TO TRANSITION CONSUMERS TO USE THE GPIO DESCRIPTOR API IN
* <linux/gpio/consumer.h> INSTEAD.
*/
jzgc->gc.base = bank * 32;
jzgc->gc.ngpio = 32;
jzgc->gc.parent = dev;
jzgc->gc.of_node = node;
jzgc->gc.owner = THIS_MODULE;
jzgc->gc.set = ingenic_gpio_set;
jzgc->gc.get = ingenic_gpio_get;
jzgc->gc.direction_input = ingenic_gpio_direction_input;
jzgc->gc.direction_output = ingenic_gpio_direction_output;
if (of_property_read_bool(node, "gpio-ranges")) {
jzgc->gc.request = gpiochip_generic_request;
jzgc->gc.free = gpiochip_generic_free;
}
err = devm_gpiochip_add_data(dev, &jzgc->gc, jzgc);
if (err)
return err;
jzgc->irq = irq_of_parse_and_map(node, 0);
if (!jzgc->irq)
return -EINVAL;
jzgc->irq_chip.name = jzgc->gc.label;
jzgc->irq_chip.irq_enable = ingenic_gpio_irq_enable;
jzgc->irq_chip.irq_disable = ingenic_gpio_irq_disable;
jzgc->irq_chip.irq_unmask = ingenic_gpio_irq_unmask;
jzgc->irq_chip.irq_mask = ingenic_gpio_irq_mask;
jzgc->irq_chip.irq_ack = ingenic_gpio_irq_ack;
jzgc->irq_chip.irq_set_type = ingenic_gpio_irq_set_type;
jzgc->irq_chip.irq_set_wake = ingenic_gpio_irq_set_wake;
jzgc->irq_chip.flags = IRQCHIP_MASK_ON_SUSPEND;
err = gpiochip_irqchip_add(&jzgc->gc, &jzgc->irq_chip, 0,
handle_level_irq, IRQ_TYPE_NONE);
if (err)
return err;
gpiochip_set_chained_irqchip(&jzgc->gc, &jzgc->irq_chip,
jzgc->irq, ingenic_gpio_irq_handler);
return 0;
}
static int __init ingenic_pinctrl_probe(struct platform_device *pdev) static int __init ingenic_pinctrl_probe(struct platform_device *pdev)
{ {
struct device *dev = &pdev->dev; struct device *dev = &pdev->dev;
...@@ -727,6 +1047,7 @@ static int __init ingenic_pinctrl_probe(struct platform_device *pdev) ...@@ -727,6 +1047,7 @@ static int __init ingenic_pinctrl_probe(struct platform_device *pdev)
const struct of_device_id *of_id = of_match_device( const struct of_device_id *of_id = of_match_device(
ingenic_pinctrl_of_match, dev); ingenic_pinctrl_of_match, dev);
const struct ingenic_chip_info *chip_info; const struct ingenic_chip_info *chip_info;
struct device_node *node;
unsigned int i; unsigned int i;
int err; int err;
...@@ -815,11 +1136,11 @@ static int __init ingenic_pinctrl_probe(struct platform_device *pdev) ...@@ -815,11 +1136,11 @@ static int __init ingenic_pinctrl_probe(struct platform_device *pdev)
dev_set_drvdata(dev, jzpc->map); dev_set_drvdata(dev, jzpc->map);
if (dev->of_node) { for_each_child_of_node(dev->of_node, node) {
err = of_platform_populate(dev->of_node, NULL, NULL, dev); if (of_match_node(ingenic_gpio_of_match, node)) {
if (err) { err = ingenic_gpio_probe(jzpc, node);
dev_err(dev, "Failed to probe GPIO devices\n"); if (err)
return err; return err;
} }
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment