Commit e7b565e7 authored by David S. Miller's avatar David S. Miller

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net

Jeff Kirsher says:

====================
This series contains fixes/updates to ixgbe only.  There are three
PTP fixes, polling loop fix and the addition of a device id (X540-AT1).
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents f4ef85bb df376f0d
...@@ -1099,7 +1099,7 @@ s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw) ...@@ -1099,7 +1099,7 @@ s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw)
if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) & if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) &
IXGBE_FDIRCTRL_INIT_DONE) IXGBE_FDIRCTRL_INIT_DONE)
break; break;
udelay(10); usleep_range(1000, 2000);
} }
if (i >= IXGBE_FDIR_INIT_DONE_POLL) { if (i >= IXGBE_FDIR_INIT_DONE_POLL) {
hw_dbg(hw, "Flow Director Signature poll time exceeded!\n"); hw_dbg(hw, "Flow Director Signature poll time exceeded!\n");
......
...@@ -70,6 +70,7 @@ static s32 ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw) ...@@ -70,6 +70,7 @@ static s32 ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw)
switch (hw->device_id) { switch (hw->device_id) {
case IXGBE_DEV_ID_X540T: case IXGBE_DEV_ID_X540T:
case IXGBE_DEV_ID_X540T1:
return 0; return 0;
case IXGBE_DEV_ID_82599_T3_LOM: case IXGBE_DEV_ID_82599_T3_LOM:
return 0; return 0;
......
...@@ -2690,10 +2690,7 @@ static int ixgbe_get_ts_info(struct net_device *dev, ...@@ -2690,10 +2690,7 @@ static int ixgbe_get_ts_info(struct net_device *dev,
(1 << HWTSTAMP_FILTER_NONE) | (1 << HWTSTAMP_FILTER_NONE) |
(1 << HWTSTAMP_FILTER_PTP_V1_L4_SYNC) | (1 << HWTSTAMP_FILTER_PTP_V1_L4_SYNC) |
(1 << HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ) | (1 << HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ) |
(1 << HWTSTAMP_FILTER_PTP_V2_SYNC) | (1 << HWTSTAMP_FILTER_PTP_V2_EVENT);
(1 << HWTSTAMP_FILTER_PTP_V2_DELAY_REQ) |
(1 << HWTSTAMP_FILTER_PTP_V2_EVENT) |
(1 << HWTSTAMP_FILTER_SOME);
break; break;
#endif /* CONFIG_IXGBE_PTP */ #endif /* CONFIG_IXGBE_PTP */
default: default:
......
...@@ -114,6 +114,7 @@ static DEFINE_PCI_DEVICE_TABLE(ixgbe_pci_tbl) = { ...@@ -114,6 +114,7 @@ static DEFINE_PCI_DEVICE_TABLE(ixgbe_pci_tbl) = {
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_LS), board_82599 }, {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_LS), board_82599 },
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599EN_SFP), board_82599 }, {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599EN_SFP), board_82599 },
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_SF_QP), board_82599 }, {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_SF_QP), board_82599 },
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540T1), board_X540 },
/* required last entry */ /* required last entry */
{0, } {0, }
}; };
...@@ -2322,6 +2323,12 @@ static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter, bool queues, ...@@ -2322,6 +2323,12 @@ static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter, bool queues,
default: default:
break; break;
} }
#ifdef CONFIG_IXGBE_PTP
if (adapter->hw.mac.type == ixgbe_mac_X540)
mask |= IXGBE_EIMS_TIMESYNC;
#endif
if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) && if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) &&
!(adapter->flags2 & IXGBE_FLAG2_FDIR_REQUIRES_REINIT)) !(adapter->flags2 & IXGBE_FLAG2_FDIR_REQUIRES_REINIT))
mask |= IXGBE_EIMS_FLOW_DIR; mask |= IXGBE_EIMS_FLOW_DIR;
...@@ -2385,7 +2392,9 @@ static irqreturn_t ixgbe_msix_other(int irq, void *data) ...@@ -2385,7 +2392,9 @@ static irqreturn_t ixgbe_msix_other(int irq, void *data)
} }
ixgbe_check_fan_failure(adapter, eicr); ixgbe_check_fan_failure(adapter, eicr);
#ifdef CONFIG_IXGBE_PTP #ifdef CONFIG_IXGBE_PTP
if (unlikely(eicr & IXGBE_EICR_TIMESYNC))
ixgbe_ptp_check_pps_event(adapter, eicr); ixgbe_ptp_check_pps_event(adapter, eicr);
#endif #endif
...@@ -2580,6 +2589,7 @@ static irqreturn_t ixgbe_intr(int irq, void *data) ...@@ -2580,6 +2589,7 @@ static irqreturn_t ixgbe_intr(int irq, void *data)
ixgbe_check_fan_failure(adapter, eicr); ixgbe_check_fan_failure(adapter, eicr);
#ifdef CONFIG_IXGBE_PTP #ifdef CONFIG_IXGBE_PTP
if (unlikely(eicr & IXGBE_EICR_TIMESYNC))
ixgbe_ptp_check_pps_event(adapter, eicr); ixgbe_ptp_check_pps_event(adapter, eicr);
#endif #endif
...@@ -7045,6 +7055,7 @@ int ixgbe_wol_supported(struct ixgbe_adapter *adapter, u16 device_id, ...@@ -7045,6 +7055,7 @@ int ixgbe_wol_supported(struct ixgbe_adapter *adapter, u16 device_id,
is_wol_supported = 1; is_wol_supported = 1;
break; break;
case IXGBE_DEV_ID_X540T: case IXGBE_DEV_ID_X540T:
case IXGBE_DEV_ID_X540T1:
/* check eeprom to see if enabled wol */ /* check eeprom to see if enabled wol */
if ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0_1) || if ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0_1) ||
((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0) && ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0) &&
......
...@@ -105,6 +105,83 @@ static struct sock_filter ptp_filter[] = { ...@@ -105,6 +105,83 @@ static struct sock_filter ptp_filter[] = {
PTP_FILTER PTP_FILTER
}; };
/**
* ixgbe_ptp_setup_sdp
* @hw: the hardware private structure
*
* this function enables or disables the clock out feature on SDP0 for
* the X540 device. It will create a 1second periodic output that can
* be used as the PPS (via an interrupt).
*
* It calculates when the systime will be on an exact second, and then
* aligns the start of the PPS signal to that value. The shift is
* necessary because it can change based on the link speed.
*/
static void ixgbe_ptp_setup_sdp(struct ixgbe_adapter *adapter)
{
struct ixgbe_hw *hw = &adapter->hw;
int shift = adapter->cc.shift;
u32 esdp, tsauxc, clktiml, clktimh, trgttiml, trgttimh, rem;
u64 ns = 0, clock_edge = 0;
if ((adapter->flags2 & IXGBE_FLAG2_PTP_PPS_ENABLED) &&
(hw->mac.type == ixgbe_mac_X540)) {
/* disable the pin first */
IXGBE_WRITE_REG(hw, IXGBE_TSAUXC, 0x0);
IXGBE_WRITE_FLUSH(hw);
esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
/*
* enable the SDP0 pin as output, and connected to the
* native function for Timesync (ClockOut)
*/
esdp |= (IXGBE_ESDP_SDP0_DIR |
IXGBE_ESDP_SDP0_NATIVE);
/*
* enable the Clock Out feature on SDP0, and allow
* interrupts to occur when the pin changes
*/
tsauxc = (IXGBE_TSAUXC_EN_CLK |
IXGBE_TSAUXC_SYNCLK |
IXGBE_TSAUXC_SDP0_INT);
/* clock period (or pulse length) */
clktiml = (u32)(NSECS_PER_SEC << shift);
clktimh = (u32)((NSECS_PER_SEC << shift) >> 32);
/*
* Account for the cyclecounter wrap-around value by
* using the converted ns value of the current time to
* check for when the next aligned second would occur.
*/
clock_edge |= (u64)IXGBE_READ_REG(hw, IXGBE_SYSTIML);
clock_edge |= (u64)IXGBE_READ_REG(hw, IXGBE_SYSTIMH) << 32;
ns = timecounter_cyc2time(&adapter->tc, clock_edge);
div_u64_rem(ns, NSECS_PER_SEC, &rem);
clock_edge += ((NSECS_PER_SEC - (u64)rem) << shift);
/* specify the initial clock start time */
trgttiml = (u32)clock_edge;
trgttimh = (u32)(clock_edge >> 32);
IXGBE_WRITE_REG(hw, IXGBE_CLKTIML, clktiml);
IXGBE_WRITE_REG(hw, IXGBE_CLKTIMH, clktimh);
IXGBE_WRITE_REG(hw, IXGBE_TRGTTIML0, trgttiml);
IXGBE_WRITE_REG(hw, IXGBE_TRGTTIMH0, trgttimh);
IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
IXGBE_WRITE_REG(hw, IXGBE_TSAUXC, tsauxc);
} else {
IXGBE_WRITE_REG(hw, IXGBE_TSAUXC, 0x0);
}
IXGBE_WRITE_FLUSH(hw);
}
/** /**
* ixgbe_ptp_read - read raw cycle counter (to be used by time counter) * ixgbe_ptp_read - read raw cycle counter (to be used by time counter)
* @cc: the cyclecounter structure * @cc: the cyclecounter structure
...@@ -198,6 +275,9 @@ static int ixgbe_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta) ...@@ -198,6 +275,9 @@ static int ixgbe_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta)
now); now);
spin_unlock_irqrestore(&adapter->tmreg_lock, flags); spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
ixgbe_ptp_setup_sdp(adapter);
return 0; return 0;
} }
...@@ -251,6 +331,7 @@ static int ixgbe_ptp_settime(struct ptp_clock_info *ptp, ...@@ -251,6 +331,7 @@ static int ixgbe_ptp_settime(struct ptp_clock_info *ptp,
timecounter_init(&adapter->tc, &adapter->cc, ns); timecounter_init(&adapter->tc, &adapter->cc, ns);
spin_unlock_irqrestore(&adapter->tmreg_lock, flags); spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
ixgbe_ptp_setup_sdp(adapter);
return 0; return 0;
} }
...@@ -281,8 +362,9 @@ static int ixgbe_ptp_enable(struct ptp_clock_info *ptp, ...@@ -281,8 +362,9 @@ static int ixgbe_ptp_enable(struct ptp_clock_info *ptp,
if (on) if (on)
adapter->flags2 |= IXGBE_FLAG2_PTP_PPS_ENABLED; adapter->flags2 |= IXGBE_FLAG2_PTP_PPS_ENABLED;
else else
adapter->flags2 &= adapter->flags2 &= ~IXGBE_FLAG2_PTP_PPS_ENABLED;
~IXGBE_FLAG2_PTP_PPS_ENABLED;
ixgbe_ptp_setup_sdp(adapter);
return 0; return 0;
default: default:
break; break;
...@@ -305,14 +387,6 @@ void ixgbe_ptp_check_pps_event(struct ixgbe_adapter *adapter, u32 eicr) ...@@ -305,14 +387,6 @@ void ixgbe_ptp_check_pps_event(struct ixgbe_adapter *adapter, u32 eicr)
struct ixgbe_hw *hw = &adapter->hw; struct ixgbe_hw *hw = &adapter->hw;
struct ptp_clock_event event; struct ptp_clock_event event;
event.type = PTP_CLOCK_PPS;
/* Make sure ptp clock is valid, and PPS event enabled */
if (!adapter->ptp_clock ||
!(adapter->flags2 & IXGBE_FLAG2_PTP_PPS_ENABLED))
return;
if (unlikely(eicr & IXGBE_EICR_TIMESYNC)) {
switch (hw->mac.type) { switch (hw->mac.type) {
case ixgbe_mac_X540: case ixgbe_mac_X540:
ptp_clock_event(adapter->ptp_clock, &event); ptp_clock_event(adapter->ptp_clock, &event);
...@@ -320,94 +394,8 @@ void ixgbe_ptp_check_pps_event(struct ixgbe_adapter *adapter, u32 eicr) ...@@ -320,94 +394,8 @@ void ixgbe_ptp_check_pps_event(struct ixgbe_adapter *adapter, u32 eicr)
default: default:
break; break;
} }
}
}
/**
* ixgbe_ptp_enable_sdp
* @hw: the hardware private structure
* @shift: the clock shift for calculating nanoseconds
*
* this function enables the clock out feature on the sdp0 for the
* X540 device. It will create a 1second periodic output that can be
* used as the PPS (via an interrupt).
*
* It calculates when the systime will be on an exact second, and then
* aligns the start of the PPS signal to that value. The shift is
* necessary because it can change based on the link speed.
*/
static void ixgbe_ptp_enable_sdp(struct ixgbe_hw *hw, int shift)
{
u32 esdp, tsauxc, clktiml, clktimh, trgttiml, trgttimh;
u64 clock_edge = 0;
u32 rem;
switch (hw->mac.type) {
case ixgbe_mac_X540:
esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
/*
* enable the SDP0 pin as output, and connected to the native
* function for Timesync (ClockOut)
*/
esdp |= (IXGBE_ESDP_SDP0_DIR |
IXGBE_ESDP_SDP0_NATIVE);
/*
* enable the Clock Out feature on SDP0, and allow interrupts
* to occur when the pin changes
*/
tsauxc = (IXGBE_TSAUXC_EN_CLK |
IXGBE_TSAUXC_SYNCLK |
IXGBE_TSAUXC_SDP0_INT);
/* clock period (or pulse length) */
clktiml = (u32)(NSECS_PER_SEC << shift);
clktimh = (u32)((NSECS_PER_SEC << shift) >> 32);
clock_edge |= (u64)IXGBE_READ_REG(hw, IXGBE_SYSTIML);
clock_edge |= (u64)IXGBE_READ_REG(hw, IXGBE_SYSTIMH) << 32;
/*
* account for the fact that we can't do u64 division
* with remainder, by converting the clock values into
* nanoseconds first
*/
clock_edge >>= shift;
div_u64_rem(clock_edge, NSECS_PER_SEC, &rem);
clock_edge += (NSECS_PER_SEC - rem);
clock_edge <<= shift;
/* specify the initial clock start time */
trgttiml = (u32)clock_edge;
trgttimh = (u32)(clock_edge >> 32);
IXGBE_WRITE_REG(hw, IXGBE_CLKTIML, clktiml);
IXGBE_WRITE_REG(hw, IXGBE_CLKTIMH, clktimh);
IXGBE_WRITE_REG(hw, IXGBE_TRGTTIML0, trgttiml);
IXGBE_WRITE_REG(hw, IXGBE_TRGTTIMH0, trgttimh);
IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
IXGBE_WRITE_REG(hw, IXGBE_TSAUXC, tsauxc);
IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EICR_TIMESYNC);
break;
default:
break;
}
} }
/**
* ixgbe_ptp_disable_sdp
* @hw: the private hardware structure
*
* this function disables the auxiliary SDP clock out feature
*/
static void ixgbe_ptp_disable_sdp(struct ixgbe_hw *hw)
{
IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_EICR_TIMESYNC);
IXGBE_WRITE_REG(hw, IXGBE_TSAUXC, 0);
}
/** /**
* ixgbe_ptp_overflow_check - delayed work to detect SYSTIME overflow * ixgbe_ptp_overflow_check - delayed work to detect SYSTIME overflow
...@@ -822,9 +810,6 @@ void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter) ...@@ -822,9 +810,6 @@ void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter)
if (adapter->cycle_speed == cycle_speed && timinca) if (adapter->cycle_speed == cycle_speed && timinca)
return; return;
/* disable the SDP clock out */
ixgbe_ptp_disable_sdp(hw);
/** /**
* Scale the NIC cycle counter by a large factor so that * Scale the NIC cycle counter by a large factor so that
* relatively small corrections to the frequency can be added * relatively small corrections to the frequency can be added
...@@ -877,10 +862,6 @@ void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter) ...@@ -877,10 +862,6 @@ void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter)
IXGBE_WRITE_REG(hw, IXGBE_SYSTIMH, 0x00000000); IXGBE_WRITE_REG(hw, IXGBE_SYSTIMH, 0x00000000);
IXGBE_WRITE_FLUSH(hw); IXGBE_WRITE_FLUSH(hw);
/* now that the shift has been calculated and the systime
* registers reset, (re-)enable the Clock out feature*/
ixgbe_ptp_enable_sdp(hw, shift);
/* store the new cycle speed */ /* store the new cycle speed */
adapter->cycle_speed = cycle_speed; adapter->cycle_speed = cycle_speed;
...@@ -901,6 +882,12 @@ void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter) ...@@ -901,6 +882,12 @@ void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter)
ktime_to_ns(ktime_get_real())); ktime_to_ns(ktime_get_real()));
spin_unlock_irqrestore(&adapter->tmreg_lock, flags); spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
/*
* Now that the shift has been calculated and the systime
* registers reset, (re-)enable the Clock out feature
*/
ixgbe_ptp_setup_sdp(adapter);
} }
/** /**
...@@ -979,10 +966,11 @@ void ixgbe_ptp_init(struct ixgbe_adapter *adapter) ...@@ -979,10 +966,11 @@ void ixgbe_ptp_init(struct ixgbe_adapter *adapter)
*/ */
void ixgbe_ptp_stop(struct ixgbe_adapter *adapter) void ixgbe_ptp_stop(struct ixgbe_adapter *adapter)
{ {
ixgbe_ptp_disable_sdp(&adapter->hw);
/* stop the overflow check task */ /* stop the overflow check task */
adapter->flags2 &= ~IXGBE_FLAG2_OVERFLOW_CHECK_ENABLED; adapter->flags2 &= ~(IXGBE_FLAG2_OVERFLOW_CHECK_ENABLED |
IXGBE_FLAG2_PTP_PPS_ENABLED);
ixgbe_ptp_setup_sdp(adapter);
if (adapter->ptp_clock) { if (adapter->ptp_clock) {
ptp_clock_unregister(adapter->ptp_clock); ptp_clock_unregister(adapter->ptp_clock);
......
...@@ -65,6 +65,7 @@ ...@@ -65,6 +65,7 @@
#define IXGBE_DEV_ID_82599_LS 0x154F #define IXGBE_DEV_ID_82599_LS 0x154F
#define IXGBE_DEV_ID_X540T 0x1528 #define IXGBE_DEV_ID_X540T 0x1528
#define IXGBE_DEV_ID_82599_SFP_SF_QP 0x154A #define IXGBE_DEV_ID_82599_SFP_SF_QP 0x154A
#define IXGBE_DEV_ID_X540T1 0x1560
/* VF Device IDs */ /* VF Device IDs */
#define IXGBE_DEV_ID_82599_VF 0x10ED #define IXGBE_DEV_ID_82599_VF 0x10ED
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment