regulator: tps65910: Correct VIO voltage configuration

The VIO regulator register specify the voltage configuration
on bit3:2 of its register. And hence only these bits should
be modified when setting voltage and used when reading voltage
from register setting.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

drivers/regulator/tps65910-regulator.c

@@ -674,8 +674,9 @@ static int tps65911_get_voltage(struct regulator_dev *dev)
 		step_mv = 100;
 		break;
 	case TPS65910_REG_VIO:
+		value &= LDO_SEL_MASK;
+		value >>= LDO_SEL_SHIFT;
 		return pmic->info[id]->voltage_table[value] * 1000;
-		break;
 	default:
 		return -EINVAL;
 	}
@@ -767,9 +768,11 @@ static int tps65911_set_voltage(struct regulator_dev *dev, unsigned selector)
 	case TPS65911_REG_LDO6:
 	case TPS65911_REG_LDO7:
 	case TPS65911_REG_LDO8:
-	case TPS65910_REG_VIO:
 		return tps65910_modify_bits(pmic, reg,
 				(selector << LDO_SEL_SHIFT), LDO3_SEL_MASK);
+	case TPS65910_REG_VIO:
+		return tps65910_modify_bits(pmic, reg,
+				(selector << LDO_SEL_SHIFT), LDO_SEL_MASK);
 	}
 
 	return -EINVAL;