Skip to content

L
linux
Commit e8b3b45d authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 

Pull ARM SoC fixes from Olof Johansson:
 "This is a slightly larger batch of fixes that we've been sitting on a
  few -rcs.  Most of them are simple oneliners, but there are two sets
  that are slightly larger and worth pointing out:

   - A set of patches to OMAP to deal with hwmod for RTC on am33xx
     (beaglebone SoC, among others).  It's the only clock that ever has
     a valid offset of 0, so a new flag needed introduction once this
     problem was discovered.

   - A collection of CCI fixes for performance counters discovered once
     people started using it on X-Gene CPUs"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits)
  arm-cci: pmu: Fix typo in event name
  Revert "ARM: tegra: fix erroneous address in dts"
  ARM: dts: imx6qdl: Fix SPDIF regression
  ARM: imx6: add missing BM_CLPCR_BYPASS_PMIC_READY setting for imx6sx
  ARM: dts: imx7d-sdb: fix ti,x-plate-ohms property name
  ARM: dts: kirkwood: Fix PCIe label on OpenRD
  ARM: kirkwood: ib62x0: fix size of u-boot environment partition
  bus: arm-ccn: make event groups reliable
  bus: arm-ccn: fix hrtimer registration
  bus: arm-ccn: fix PMU interrupt flags
  ARM: tegra: Correct polarity for Tegra114 PMIC interrupt
  MAINTAINERS: add tree entry for ARM/UniPhier architecture
  ARM: sun5i: Fix typo in trip point temperature
  MAINTAINERS: Switch to kernel.org account for Krzysztof Kozlowski
  ARM: imx6ul: populates platform device at .init_machine
  bus: arm-ccn: Add missing event attribute exclusions for host/guest
  bus: arm-ccn: Correct required arguments for XP PMU events
  bus: arm-ccn: Fix XP watchpoint settings bitmask
  bus: arm-ccn: Do not attempt to configure XPs for cycle counter
  bus: arm-ccn: Fix PMU handling of MN
  ...
parents d71f0586 95390e32
Show whitespace changes
Inline Side-by-side
Showing with 172 additions and 109 deletions
.mailmap
View file @ e8b3b45d
......@@ -88,6 +88,7 @@ Kay Sievers <kay.sievers@vrfy.org>
Kenneth W Chen <kenneth.w.chen@intel.com>
Konstantin Khlebnikov <koct9i@gmail.com> <k.khlebnikov@samsung.com>
Koushik <raghavendra.koushik@neterion.com>
Krzysztof Kozlowski <krzk@kernel.org> <k.kozlowski@samsung.com>
Krzysztof Kozlowski <krzk@kernel.org> <k.kozlowski.k@gmail.com>
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Leonid I Ananiev <leonid.i.ananiev@intel.com>
......
Documentation/arm/CCN.txt
View file @ e8b3b45d
......@@ -18,13 +18,17 @@ and config2 fields of the perf_event_attr structure. The "events"
directory provides configuration templates for all documented
events, that can be used with perf tool. For example "xp_valid_flit"
is an equivalent of "type=0x8,event=0x4". Other parameters must be
explicitly specified. For events originating from device, "node"
defines its index. All crosspoint events require "xp" (index),
"port" (device port number) and "vc" (virtual channel ID) and
"dir" (direction). Watchpoints (special "event" value 0xfe) also
require comparator values ("cmp_l" and "cmp_h") and "mask", being
index of the comparator mask.
explicitly specified.
For events originating from device, "node" defines its index.
Crosspoint PMU events require "xp" (index), "bus" (bus number)
and "vc" (virtual channel ID).
Crosspoint watchpoint-based events (special "event" value 0xfe)
require "xp" and "vc" as as above plus "port" (device port index),
"dir" (transmit/receive direction), comparator values ("cmp_l"
and "cmp_h") and "mask", being index of the comparator mask.
Masks are defined separately from the event description
(due to limited number of the config values) in the "cmp_mask"
directory, with first 8 configurable by user and additional
......
MAINTAINERS
View file @ e8b3b45d
......@@ -1624,7 +1624,7 @@ N: rockchip
ARM/SAMSUNG EXYNOS ARM ARCHITECTURES
M: Kukjin Kim <kgene@kernel.org>
M: Krzysztof Kozlowski <k.kozlowski@samsung.com>
M: Krzysztof Kozlowski <krzk@kernel.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
S: Maintained
......@@ -1831,6 +1831,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git
ARM/UNIPHIER ARCHITECTURE
M: Masahiro Yamada <yamada.masahiro@socionext.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier.git
S: Maintained
F: arch/arm/boot/dts/uniphier*
F: arch/arm/include/asm/hardware/cache-uniphier.h
......@@ -7464,7 +7465,8 @@ F: Documentation/devicetree/bindings/sound/max9860.txt
F: sound/soc/codecs/max9860.*
MAXIM MUIC CHARGER DRIVERS FOR EXYNOS BASED BOARDS
M: Krzysztof Kozlowski <k.kozlowski@samsung.com>
M: Krzysztof Kozlowski <krzk@kernel.org>
M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
L: linux-pm@vger.kernel.org
S: Supported
F: drivers/power/max14577_charger.c
......@@ -7480,7 +7482,8 @@ F: include/dt-bindings/*/*max77802.h
MAXIM PMIC AND MUIC DRIVERS FOR EXYNOS BASED BOARDS
M: Chanwoo Choi <cw00.choi@samsung.com>
M: Krzysztof Kozlowski <k.kozlowski@samsung.com>
M: Krzysztof Kozlowski <krzk@kernel.org>
M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
L: linux-kernel@vger.kernel.org
S: Supported
F: drivers/*/max14577*.c
......@@ -9246,7 +9249,7 @@ F: drivers/pinctrl/sh-pfc/
PIN CONTROLLER - SAMSUNG
M: Tomasz Figa <tomasz.figa@gmail.com>
M: Krzysztof Kozlowski <k.kozlowski@samsung.com>
M: Krzysztof Kozlowski <krzk@kernel.org>
M: Sylwester Nawrocki <s.nawrocki@samsung.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
......@@ -10179,7 +10182,7 @@ S: Maintained
F: drivers/platform/x86/samsung-laptop.c
SAMSUNG AUDIO (ASoC) DRIVERS
M: Krzysztof Kozlowski <k.kozlowski@samsung.com>
M: Krzysztof Kozlowski <krzk@kernel.org>
M: Sangbeom Kim <sbkim73@samsung.com>
M: Sylwester Nawrocki <s.nawrocki@samsung.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
......@@ -10194,7 +10197,8 @@ F: drivers/video/fbdev/s3c-fb.c
SAMSUNG MULTIFUNCTION PMIC DEVICE DRIVERS
M: Sangbeom Kim <sbkim73@samsung.com>
M: Krzysztof Kozlowski <k.kozlowski@samsung.com>
M: Krzysztof Kozlowski <krzk@kernel.org>
M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
L: linux-kernel@vger.kernel.org
L: linux-samsung-soc@vger.kernel.org
S: Supported
......
arch/arm/boot/dts/am335x-baltos.dtsi
View file @ e8b3b45d
......@@ -226,7 +226,7 @@ nand@0,0 {
#address-cells = <1>;
#size-cells = <1>;
elm_id = <&elm>;
ti,elm-id = <&elm>;
};
};
......
arch/arm/boot/dts/am335x-igep0033.dtsi
View file @ e8b3b45d
......@@ -161,7 +161,7 @@ nand@0,0 {
#address-cells = <1>;
#size-cells = <1>;
elm_id = <&elm>;
ti,elm-id = <&elm>;
/* MTD partition table */
partition@0 {
......
arch/arm/boot/dts/am335x-phycore-som.dtsi
View file @ e8b3b45d
......@@ -197,7 +197,7 @@ nandflash: nand@0,0 {
gpmc,wr-access-ns = <30>;
gpmc,wr-data-mux-bus-ns = <0>;
elm_id = <&elm>;
ti,elm-id = <&elm>;
#address-cells = <1>;
#size-cells = <1>;
......
arch/arm/boot/dts/armada-388-clearfog.dts
View file @ e8b3b45d
......@@ -390,12 +390,12 @@ switch@0 {
port@0 {
reg = <0>;
label = "lan1";
label = "lan5";
};
port@1 {
reg = <1>;
label = "lan2";
label = "lan4";
};
port@2 {
......@@ -405,12 +405,12 @@ port@2 {
port@3 {
reg = <3>;
label = "lan4";
label = "lan2";
};
port@4 {
reg = <4>;
label = "lan5";
label = "lan1";
};
port@5 {
......
arch/arm/boot/dts/exynos5410-odroidxu.dts
View file @ e8b3b45d
......@@ -447,14 +447,11 @@ &mmc_0 {
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <0 4>;
samsung,dw-mshc-ddr-timing = <0 2>;
samsung,dw-mshc-hs400-timing = <0 2>;
samsung,read-strobe-delay = <90>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>;
bus-width = <8>;
cap-mmc-highspeed;
mmc-hs200-1_8v;
mmc-hs400-1_8v;
vmmc-supply = <&ldo20_reg>;
vqmmc-supply = <&ldo11_reg>;
};
......
arch/arm/boot/dts/imx6qdl.dtsi
View file @ e8b3b45d
......@@ -243,7 +243,7 @@ spdif: spdif@02004000 {
clocks = <&clks IMX6QDL_CLK_SPDIF_GCLK>, <&clks IMX6QDL_CLK_OSC>,
<&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_ASRC>,
<&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_ESAI_EXTAL>,
<&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_MLB>,
<&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_DUMMY>,
<&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_SPBA>;
clock-names = "core", "rxtx0",
"rxtx1", "rxtx2",
......
arch/arm/boot/dts/imx6sx-sabreauto.dts
View file @ e8b3b45d
......@@ -64,7 +64,7 @@ &usdhc4 {
cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>;
no-1-8-v;
keep-power-in-suspend;
enable-sdio-wakup;
wakeup-source;
status = "okay";
};
......
arch/arm/boot/dts/imx7d-sdb.dts
View file @ e8b3b45d
......@@ -131,7 +131,7 @@ tsc2046@0 {
ti,y-min = /bits/ 16 <0>;
ti,y-max = /bits/ 16 <0>;
ti,pressure-max = /bits/ 16 <0>;
ti,x-plat-ohms = /bits/ 16 <400>;
ti,x-plate-ohms = /bits/ 16 <400>;
wakeup-source;
};
};
......
arch/arm/boot/dts/kirkwood-ib62x0.dts
View file @ e8b3b45d
......@@ -113,7 +113,7 @@ partition@0 {
partition@e0000 {
label = "u-boot environment";
reg = <0xe0000 0x100000>;
reg = <0xe0000 0x20000>;
};
partition@100000 {
......
arch/arm/boot/dts/kirkwood-openrd.dtsi
View file @ e8b3b45d
......@@ -116,6 +116,10 @@ partition@600000 {
};
};
&pciec {
status = "okay";
};
&pcie0 {
status = "okay";
};
arch/arm/boot/dts/logicpd-som-lv.dtsi
View file @ e8b3b45d
......@@ -35,10 +35,15 @@ &gpmc {
ranges = <0 0 0x00000000 0x1000000>; /* CS0: 16MB for NAND */
nand@0,0 {
linux,mtd-name = "micron,mt29f4g16abbda3w";
compatible = "ti,omap2-nand";
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
linux,mtd-name = "micron,mt29f4g16abbda3w";
nand-bus-width = <16>;
ti,nand-ecc-opt = "bch8";
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <44>;
......@@ -54,10 +59,6 @@ nand@0,0 {
gpmc,wr-access-ns = <40>;
gpmc,wr-data-mux-bus-ns = <0>;
gpmc,device-width = <2>;
gpmc,page-burst-access-ns = <5>;
gpmc,cycle2cycle-delay-ns = <50>;
#address-cells = <1>;
#size-cells = <1>;
......
arch/arm/boot/dts/logicpd-torpedo-som.dtsi
View file @ e8b3b45d
......@@ -46,6 +46,7 @@ nand@0,0 {
linux,mtd-name = "micron,mt29f4g16abbda3w";
nand-bus-width = <16>;
ti,nand-ecc-opt = "bch8";
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <44>;
......
arch/arm/boot/dts/omap3-overo-base.dtsi
View file @ e8b3b45d
......@@ -223,7 +223,9 @@ &mcbsp2 {
};
&gpmc {
ranges = <0 0 0x00000000 0x20000000>;
ranges = <0 0 0x30000000 0x1000000>, /* CS0 */
<4 0 0x2b000000 0x1000000>, /* CS4 */
<5 0 0x2c000000 0x1000000>; /* CS5 */
nand@0,0 {
compatible = "ti,omap2-nand";
......
arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
View file @ e8b3b45d
......@@ -55,8 +55,6 @@ button1@14 {
#include "omap-gpmc-smsc9221.dtsi"
&gpmc {
ranges = <5 0 0x2c000000 0x1000000>; /* CS5 */
ethernet@gpmc {
reg = <5 0 0xff>;
interrupt-parent = <&gpio6>;
......
arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
View file @ e8b3b45d
......@@ -27,8 +27,6 @@ heartbeat {
#include "omap-gpmc-smsc9221.dtsi"
&gpmc {
ranges = <5 0 0x2c000000 0x1000000>; /* CS5 */
ethernet@gpmc {
reg = <5 0 0xff>;
interrupt-parent = <&gpio6>;
......
arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
View file @ e8b3b45d
......@@ -15,9 +15,6 @@
#include "omap-gpmc-smsc9221.dtsi"
&gpmc {
ranges = <4 0 0x2b000000 0x1000000>, /* CS4 */
<5 0 0x2c000000 0x1000000>; /* CS5 */
smsc1: ethernet@gpmc {
reg = <5 0 0xff>;
interrupt-parent = <&gpio6>;
......
arch/arm/boot/dts/sun5i-a13.dtsi
View file @ e8b3b45d
......@@ -84,7 +84,7 @@ map0 {
trips {
cpu_alert0: cpu_alert0 {
/* milliCelsius */
temperature = <850000>;
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
......
arch/arm/boot/dts/tegra114-dalmore.dts
View file @ e8b3b45d
......@@ -897,7 +897,7 @@ ldo2 {
palmas: tps65913@58 {
compatible = "ti,palmas";
reg = <0x58>;
interrupts = <0 86 IRQ_TYPE_LEVEL_LOW>;
interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
interrupt-controller;
......
arch/arm/boot/dts/tegra114-roth.dts
View file @ e8b3b45d
......@@ -802,7 +802,7 @@ regulator@43 {
palmas: pmic@58 {
compatible = "ti,palmas";
reg = <0x58>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
interrupt-controller;
......
arch/arm/boot/dts/tegra114-tn7.dts
View file @ e8b3b45d
......@@ -63,7 +63,7 @@ i2c@7000d000 {
palmas: pmic@58 {
compatible = "ti,palmas";
reg = <0x58>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
interrupt-controller;
......
arch/arm/boot/dts/tegra124-jetson-tk1.dts
View file @ e8b3b45d
......@@ -1382,7 +1382,7 @@ dsi_b {
* Pin 41: BR_UART1_TXD
* Pin 44: BR_UART1_RXD
*/
serial@0,70006000 {
serial@70006000 {
compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
status = "okay";
};
......@@ -1394,7 +1394,7 @@ serial@0,70006000 {
* Pin 71: UART2_CTS_L
* Pin 74: UART2_RTS_L
*/
serial@0,70006040 {
serial@70006040 {
compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
status = "okay";
};
......
arch/arm/mach-imx/mach-imx6ul.c
View file @ e8b3b45d
......@@ -64,6 +64,7 @@ static void __init imx6ul_init_machine(void)
if (parent == NULL)
pr_warn("failed to initialize soc device\n");
of_platform_default_populate(NULL, NULL, parent);
imx6ul_enet_init();
imx_anatop_init();
imx6ul_pm_init();
......
arch/arm/mach-imx/pm-imx6.c
View file @ e8b3b45d
......@@ -295,7 +295,7 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode)
val &= ~BM_CLPCR_SBYOS;
if (cpu_is_imx6sl())
val |= BM_CLPCR_BYPASS_PMIC_READY;
if (cpu_is_imx6sl() || cpu_is_imx6sx())
if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul())
val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
else
val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
......@@ -310,7 +310,7 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode)
val |= 0x3 << BP_CLPCR_STBY_COUNT;
val |= BM_CLPCR_VSTBY;
val |= BM_CLPCR_SBYOS;
if (cpu_is_imx6sl())
if (cpu_is_imx6sl() || cpu_is_imx6sx())
val |= BM_CLPCR_BYPASS_PMIC_READY;
if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul())
val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
......
arch/arm/mach-omap2/cm33xx.c
View file @ e8b3b45d
......@@ -220,9 +220,6 @@ static int am33xx_cm_wait_module_ready(u8 part, s16 inst, u16 clkctrl_offs,
{
int i = 0;
if (!clkctrl_offs)
return 0;
omap_test_timeout(_is_module_ready(inst, clkctrl_offs),
MAX_MODULE_READY_TIME, i);
......@@ -246,9 +243,6 @@ static int am33xx_cm_wait_module_idle(u8 part, s16 inst, u16 clkctrl_offs,
{
int i = 0;
if (!clkctrl_offs)
return 0;
omap_test_timeout((_clkctrl_idlest(inst, clkctrl_offs) ==
CLKCTRL_IDLEST_DISABLED),
MAX_MODULE_READY_TIME, i);
......
arch/arm/mach-omap2/cminst44xx.c
View file @ e8b3b45d
......@@ -278,9 +278,6 @@ static int omap4_cminst_wait_module_ready(u8 part, s16 inst, u16 clkctrl_offs,
{
int i = 0;
if (!clkctrl_offs)
return 0;
omap_test_timeout(_is_module_ready(part, inst, clkctrl_offs),
MAX_MODULE_READY_TIME, i);
......@@ -304,9 +301,6 @@ static int omap4_cminst_wait_module_idle(u8 part, s16 inst, u16 clkctrl_offs,
{
int i = 0;
if (!clkctrl_offs)
return 0;
omap_test_timeout((_clkctrl_idlest(part, inst, clkctrl_offs) ==
CLKCTRL_IDLEST_DISABLED),
MAX_MODULE_DISABLE_TIME, i);
......
arch/arm/mach-omap2/omap_hwmod.c
View file @ e8b3b45d
......@@ -1053,6 +1053,10 @@ static int _omap4_wait_target_disable(struct omap_hwmod *oh)
if (oh->flags & HWMOD_NO_IDLEST)
return 0;
if (!oh->prcm.omap4.clkctrl_offs &&
!(oh->prcm.omap4.flags & HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET))
return 0;
return omap_cm_wait_module_idle(oh->clkdm->prcm_partition,
oh->clkdm->cm_inst,
oh->prcm.omap4.clkctrl_offs, 0);
......@@ -2971,6 +2975,10 @@ static int _omap4_wait_target_ready(struct omap_hwmod *oh)
if (!_find_mpu_rt_port(oh))
return 0;
if (!oh->prcm.omap4.clkctrl_offs &&
!(oh->prcm.omap4.flags & HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET))
return 0;
/* XXX check module SIDLEMODE, hardreset status */
return omap_cm_wait_module_ready(oh->clkdm->prcm_partition,
......
arch/arm/mach-omap2/omap_hwmod.h
View file @ e8b3b45d
......@@ -443,8 +443,12 @@ struct omap_hwmod_omap2_prcm {
* HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT: Some IP blocks don't have a PRCM
* module-level context loss register associated with them; this
* flag bit should be set in those cases
* HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET: Some IP blocks have a valid CLKCTRL
* offset of zero; this flag bit should be set in those cases to
* distinguish from hwmods that have no clkctrl offset.
*/
#define HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT (1 << 0)
#define HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET (1 << 1)
/**
* struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
......
arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
View file @ e8b3b45d
......@@ -29,6 +29,7 @@
#define CLKCTRL(oh, clkctrl) ((oh).prcm.omap4.clkctrl_offs = (clkctrl))
#define RSTCTRL(oh, rstctrl) ((oh).prcm.omap4.rstctrl_offs = (rstctrl))
#define RSTST(oh, rstst) ((oh).prcm.omap4.rstst_offs = (rstst))
#define PRCM_FLAGS(oh, flag) ((oh).prcm.omap4.flags = (flag))
/*
* 'l3' class
......@@ -1296,6 +1297,7 @@ static void omap_hwmod_am33xx_clkctrl(void)
CLKCTRL(am33xx_i2c1_hwmod, AM33XX_CM_WKUP_I2C0_CLKCTRL_OFFSET);
CLKCTRL(am33xx_wd_timer1_hwmod, AM33XX_CM_WKUP_WDT1_CLKCTRL_OFFSET);
CLKCTRL(am33xx_rtc_hwmod, AM33XX_CM_RTC_RTC_CLKCTRL_OFFSET);
PRCM_FLAGS(am33xx_rtc_hwmod, HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET);
CLKCTRL(am33xx_mmc2_hwmod, AM33XX_CM_PER_MMC2_CLKCTRL_OFFSET);
CLKCTRL(am33xx_gpmc_hwmod, AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET);
CLKCTRL(am33xx_l4_ls_hwmod, AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET);
......
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
View file @ e8b3b45d
......@@ -722,8 +722,20 @@ static struct omap_hwmod omap3xxx_dss_dispc_hwmod = {
* display serial interface controller
*/
static struct omap_hwmod_class_sysconfig omap3xxx_dsi_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
.syss_offs = 0x0014,
.sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
};
static struct omap_hwmod_class omap3xxx_dsi_hwmod_class = {
.name = "dsi",
.sysc = &omap3xxx_dsi_sysc,
};
static struct omap_hwmod_irq_info omap3xxx_dsi1_irqs[] = {
......
drivers/bus/arm-cci.c
View file @ e8b3b45d
......@@ -551,7 +551,7 @@ static struct attribute *cci5xx_pmu_event_attrs[] = {
CCI5xx_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_wrq, 0xB),
CCI5xx_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_cd_hs, 0xC),
CCI5xx_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_rq_stall_addr_hazard, 0xD),
CCI5xx_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snopp_rq_stall_tt_full, 0xE),
CCI5xx_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_rq_stall_tt_full, 0xE),
CCI5xx_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_rq_tzmp1_prot, 0xF),
NULL
};
......
drivers/bus/arm-ccn.c
View file @ e8b3b45d
......@@ -187,6 +187,7 @@ struct arm_ccn {
struct arm_ccn_component *xp;
struct arm_ccn_dt dt;
int mn_id;
};
static DEFINE_MUTEX(arm_ccn_mutex);
......@@ -212,6 +213,7 @@ static int arm_ccn_node_to_xp_port(int node)
#define CCN_CONFIG_TYPE(_config) (((_config) >> 8) & 0xff)
#define CCN_CONFIG_EVENT(_config) (((_config) >> 16) & 0xff)
#define CCN_CONFIG_PORT(_config) (((_config) >> 24) & 0x3)
#define CCN_CONFIG_BUS(_config) (((_config) >> 24) & 0x3)
#define CCN_CONFIG_VC(_config) (((_config) >> 26) & 0x7)
#define CCN_CONFIG_DIR(_config) (((_config) >> 29) & 0x1)
#define CCN_CONFIG_MASK(_config) (((_config) >> 30) & 0xf)
......@@ -241,6 +243,7 @@ static CCN_FORMAT_ATTR(xp, "config:0-7");
static CCN_FORMAT_ATTR(type, "config:8-15");
static CCN_FORMAT_ATTR(event, "config:16-23");
static CCN_FORMAT_ATTR(port, "config:24-25");
static CCN_FORMAT_ATTR(bus, "config:24-25");
static CCN_FORMAT_ATTR(vc, "config:26-28");
static CCN_FORMAT_ATTR(dir, "config:29-29");
static CCN_FORMAT_ATTR(mask, "config:30-33");
......@@ -253,6 +256,7 @@ static struct attribute *arm_ccn_pmu_format_attrs[] = {
&arm_ccn_pmu_format_attr_type.attr.attr,
&arm_ccn_pmu_format_attr_event.attr.attr,
&arm_ccn_pmu_format_attr_port.attr.attr,
&arm_ccn_pmu_format_attr_bus.attr.attr,
&arm_ccn_pmu_format_attr_vc.attr.attr,
&arm_ccn_pmu_format_attr_dir.attr.attr,
&arm_ccn_pmu_format_attr_mask.attr.attr,
......@@ -328,6 +332,7 @@ struct arm_ccn_pmu_event {
static ssize_t arm_ccn_pmu_event_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct arm_ccn *ccn = pmu_to_arm_ccn(dev_get_drvdata(dev));
struct arm_ccn_pmu_event *event = container_of(attr,
struct arm_ccn_pmu_event, attr);
ssize_t res;
......@@ -349,10 +354,17 @@ static ssize_t arm_ccn_pmu_event_show(struct device *dev,
break;
case CCN_TYPE_XP:
res += snprintf(buf + res, PAGE_SIZE - res,
",xp=?,port=?,vc=?,dir=?");
",xp=?,vc=?");
if (event->event == CCN_EVENT_WATCHPOINT)
res += snprintf(buf + res, PAGE_SIZE - res,
",cmp_l=?,cmp_h=?,mask=?");
",port=?,dir=?,cmp_l=?,cmp_h=?,mask=?");
else
res += snprintf(buf + res, PAGE_SIZE - res,
",bus=?");
break;
case CCN_TYPE_MN:
res += snprintf(buf + res, PAGE_SIZE - res, ",node=%d", ccn->mn_id);
break;
default:
res += snprintf(buf + res, PAGE_SIZE - res, ",node=?");
......@@ -383,9 +395,9 @@ static umode_t arm_ccn_pmu_events_is_visible(struct kobject *kobj,
}
static struct arm_ccn_pmu_event arm_ccn_pmu_events[] = {
CCN_EVENT_MN(eobarrier, "dir=0,vc=0,cmp_h=0x1c00", CCN_IDX_MASK_OPCODE),
CCN_EVENT_MN(ecbarrier, "dir=0,vc=0,cmp_h=0x1e00", CCN_IDX_MASK_OPCODE),
CCN_EVENT_MN(dvmop, "dir=0,vc=0,cmp_h=0x2800", CCN_IDX_MASK_OPCODE),
CCN_EVENT_MN(eobarrier, "dir=1,vc=0,cmp_h=0x1c00", CCN_IDX_MASK_OPCODE),
CCN_EVENT_MN(ecbarrier, "dir=1,vc=0,cmp_h=0x1e00", CCN_IDX_MASK_OPCODE),
CCN_EVENT_MN(dvmop, "dir=1,vc=0,cmp_h=0x2800", CCN_IDX_MASK_OPCODE),
CCN_EVENT_HNI(txdatflits, "dir=1,vc=3", CCN_IDX_MASK_ANY),
CCN_EVENT_HNI(rxdatflits, "dir=0,vc=3", CCN_IDX_MASK_ANY),
CCN_EVENT_HNI(txreqflits, "dir=1,vc=0", CCN_IDX_MASK_ANY),
......@@ -733,9 +745,10 @@ static int arm_ccn_pmu_event_init(struct perf_event *event)
if (has_branch_stack(event) || event->attr.exclude_user ||
event->attr.exclude_kernel || event->attr.exclude_hv ||
event->attr.exclude_idle) {
event->attr.exclude_idle || event->attr.exclude_host ||
event->attr.exclude_guest) {
dev_warn(ccn->dev, "Can't exclude execution levels!\n");
return -EOPNOTSUPP;
return -EINVAL;
}
if (event->cpu < 0) {
......@@ -759,6 +772,12 @@ static int arm_ccn_pmu_event_init(struct perf_event *event)
/* Validate node/xp vs topology */
switch (type) {
case CCN_TYPE_MN:
if (node_xp != ccn->mn_id) {
dev_warn(ccn->dev, "Invalid MN ID %d!\n", node_xp);
return -EINVAL;
}
break;
case CCN_TYPE_XP:
if (node_xp >= ccn->num_xps) {
dev_warn(ccn->dev, "Invalid XP ID %d!\n", node_xp);
......@@ -886,6 +905,10 @@ static void arm_ccn_pmu_xp_dt_config(struct perf_event *event, int enable)
struct arm_ccn_component *xp;
u32 val, dt_cfg;
/* Nothing to do for cycle counter */
if (hw->idx == CCN_IDX_PMU_CYCLE_COUNTER)
return;
if (CCN_CONFIG_TYPE(event->attr.config) == CCN_TYPE_XP)
xp = &ccn->xp[CCN_CONFIG_XP(event->attr.config)];
else
......@@ -917,38 +940,17 @@ static void arm_ccn_pmu_event_start(struct perf_event *event, int flags)
arm_ccn_pmu_read_counter(ccn, hw->idx));
hw->state = 0;
/*
* Pin the timer, so that the overflows are handled by the chosen
* event->cpu (this is the same one as presented in "cpumask"
* attribute).
*/
if (!ccn->irq)
hrtimer_start(&ccn->dt.hrtimer, arm_ccn_pmu_timer_period(),
HRTIMER_MODE_REL_PINNED);
/* Set the DT bus input, engaging the counter */
arm_ccn_pmu_xp_dt_config(event, 1);
}
static void arm_ccn_pmu_event_stop(struct perf_event *event, int flags)
{
struct arm_ccn *ccn = pmu_to_arm_ccn(event->pmu);
struct hw_perf_event *hw = &event->hw;
u64 timeout;
/* Disable counting, setting the DT bus to pass-through mode */
arm_ccn_pmu_xp_dt_config(event, 0);
if (!ccn->irq)
hrtimer_cancel(&ccn->dt.hrtimer);
/* Let the DT bus drain */
timeout = arm_ccn_pmu_read_counter(ccn, CCN_IDX_PMU_CYCLE_COUNTER) +
ccn->num_xps;
while (arm_ccn_pmu_read_counter(ccn, CCN_IDX_PMU_CYCLE_COUNTER) <
timeout)
cpu_relax();
if (flags & PERF_EF_UPDATE)
arm_ccn_pmu_event_update(event);
......@@ -988,7 +990,7 @@ static void arm_ccn_pmu_xp_watchpoint_config(struct perf_event *event)
/* Comparison values */
writel(cmp_l & 0xffffffff, source->base + CCN_XP_DT_CMP_VAL_L(wp));
writel((cmp_l >> 32) & 0xefffffff,
writel((cmp_l >> 32) & 0x7fffffff,
source->base + CCN_XP_DT_CMP_VAL_L(wp) + 4);
writel(cmp_h & 0xffffffff, source->base + CCN_XP_DT_CMP_VAL_H(wp));
writel((cmp_h >> 32) & 0x0fffffff,
......@@ -996,7 +998,7 @@ static void arm_ccn_pmu_xp_watchpoint_config(struct perf_event *event)
/* Mask */
writel(mask_l & 0xffffffff, source->base + CCN_XP_DT_CMP_MASK_L(wp));
writel((mask_l >> 32) & 0xefffffff,
writel((mask_l >> 32) & 0x7fffffff,
source->base + CCN_XP_DT_CMP_MASK_L(wp) + 4);
writel(mask_h & 0xffffffff, source->base + CCN_XP_DT_CMP_MASK_H(wp));
writel((mask_h >> 32) & 0x0fffffff,
......@@ -1014,7 +1016,7 @@ static void arm_ccn_pmu_xp_event_config(struct perf_event *event)
hw->event_base = CCN_XP_DT_CONFIG__DT_CFG__XP_PMU_EVENT(hw->config_base);
id = (CCN_CONFIG_VC(event->attr.config) << 4) |
(CCN_CONFIG_PORT(event->attr.config) << 3) |
(CCN_CONFIG_BUS(event->attr.config) << 3) |
(CCN_CONFIG_EVENT(event->attr.config) << 0);
val = readl(source->base + CCN_XP_PMU_EVENT_SEL);
......@@ -1099,15 +1101,31 @@ static void arm_ccn_pmu_event_config(struct perf_event *event)
spin_unlock(&ccn->dt.config_lock);
}
static int arm_ccn_pmu_active_counters(struct arm_ccn *ccn)
{
return bitmap_weight(ccn->dt.pmu_counters_mask,
CCN_NUM_PMU_EVENT_COUNTERS + 1);
}
static int arm_ccn_pmu_event_add(struct perf_event *event, int flags)
{
int err;
struct hw_perf_event *hw = &event->hw;
struct arm_ccn *ccn = pmu_to_arm_ccn(event->pmu);
err = arm_ccn_pmu_event_alloc(event);
if (err)
return err;
/*
* Pin the timer, so that the overflows are handled by the chosen
* event->cpu (this is the same one as presented in "cpumask"
* attribute).
*/
if (!ccn->irq && arm_ccn_pmu_active_counters(ccn) == 1)
hrtimer_start(&ccn->dt.hrtimer, arm_ccn_pmu_timer_period(),
HRTIMER_MODE_REL_PINNED);
arm_ccn_pmu_event_config(event);
hw->state = PERF_HES_STOPPED;
......@@ -1120,9 +1138,14 @@ static int arm_ccn_pmu_event_add(struct perf_event *event, int flags)
static void arm_ccn_pmu_event_del(struct perf_event *event, int flags)
{
struct arm_ccn *ccn = pmu_to_arm_ccn(event->pmu);
arm_ccn_pmu_event_stop(event, PERF_EF_UPDATE);
arm_ccn_pmu_event_release(event);
if (!ccn->irq && arm_ccn_pmu_active_counters(ccn) == 0)
hrtimer_cancel(&ccn->dt.hrtimer);
}
static void arm_ccn_pmu_event_read(struct perf_event *event)
......@@ -1130,6 +1153,24 @@ static void arm_ccn_pmu_event_read(struct perf_event *event)
arm_ccn_pmu_event_update(event);
}
static void arm_ccn_pmu_enable(struct pmu *pmu)
{
struct arm_ccn *ccn = pmu_to_arm_ccn(pmu);
u32 val = readl(ccn->dt.base + CCN_DT_PMCR);
val |= CCN_DT_PMCR__PMU_EN;
writel(val, ccn->dt.base + CCN_DT_PMCR);
}
static void arm_ccn_pmu_disable(struct pmu *pmu)
{
struct arm_ccn *ccn = pmu_to_arm_ccn(pmu);
u32 val = readl(ccn->dt.base + CCN_DT_PMCR);
val &= ~CCN_DT_PMCR__PMU_EN;
writel(val, ccn->dt.base + CCN_DT_PMCR);
}
static irqreturn_t arm_ccn_pmu_overflow_handler(struct arm_ccn_dt *dt)
{
u32 pmovsr = readl(dt->base + CCN_DT_PMOVSR);
......@@ -1252,6 +1293,8 @@ static int arm_ccn_pmu_init(struct arm_ccn *ccn)
.start = arm_ccn_pmu_event_start,
.stop = arm_ccn_pmu_event_stop,
.read = arm_ccn_pmu_event_read,
.pmu_enable = arm_ccn_pmu_enable,
.pmu_disable = arm_ccn_pmu_disable,
};
/* No overflow interrupt? Have to use a timer instead. */
......@@ -1361,6 +1404,8 @@ static int arm_ccn_init_nodes(struct arm_ccn *ccn, int region,
switch (type) {
case CCN_TYPE_MN:
ccn->mn_id = id;
return 0;
case CCN_TYPE_DT:
return 0;
case CCN_TYPE_XP:
......@@ -1471,7 +1516,8 @@ static int arm_ccn_probe(struct platform_device *pdev)
/* Can set 'disable' bits, so can acknowledge interrupts */
writel(CCN_MN_ERRINT_STATUS__PMU_EVENTS__ENABLE,
ccn->base + CCN_MN_ERRINT_STATUS);
err = devm_request_irq(ccn->dev, irq, arm_ccn_irq_handler, 0,
err = devm_request_irq(ccn->dev, irq, arm_ccn_irq_handler,
IRQF_NOBALANCING | IRQF_NO_THREAD,
dev_name(ccn->dev), ccn);
if (err)
return err;
......
drivers/bus/vexpress-config.c
View file @ e8b3b45d
......@@ -178,6 +178,7 @@ static int vexpress_config_populate(struct device_node *node)
parent = class_find_device(vexpress_config_class, NULL, bridge,
vexpress_config_node_match);
of_node_put(bridge);
if (WARN_ON(!parent))
return -ENODEV;
......
drivers/firmware/arm_scpi.c
View file @ e8b3b45d
......@@ -709,9 +709,10 @@ static int scpi_probe(struct platform_device *pdev)
struct mbox_client *cl = &pchan->cl;
struct device_node *shmem = of_parse_phandle(np, "shmem", idx);
if (of_address_to_resource(shmem, 0, &res)) {
ret = of_address_to_resource(shmem, 0, &res);
of_node_put(shmem);
if (ret) {
dev_err(dev, "failed to get SCPI payload mem resource\n");
ret = -EINVAL;
goto err;
}
......
drivers/memory/omap-gpmc.c
View file @ e8b3b45d
......@@ -2185,7 +2185,7 @@ static int gpmc_probe_dt(struct platform_device *pdev)
return 0;
}
static int gpmc_probe_dt_children(struct platform_device *pdev)
static void gpmc_probe_dt_children(struct platform_device *pdev)
{
int ret;
struct device_node *child;
......@@ -2200,11 +2200,11 @@ static int gpmc_probe_dt_children(struct platform_device *pdev)
else
ret = gpmc_probe_generic_child(pdev, child);
if (ret)
return ret;
if (ret) {
dev_err(&pdev->dev, "failed to probe DT child '%s': %d\n",
child->name, ret);
}
}
return 0;
}
#else
static int gpmc_probe_dt(struct platform_device *pdev)
......@@ -2212,9 +2212,8 @@ static int gpmc_probe_dt(struct platform_device *pdev)
return 0;
}
static int gpmc_probe_dt_children(struct platform_device *pdev)
static void gpmc_probe_dt_children(struct platform_device *pdev)
{
return 0;
}
#endif /* CONFIG_OF */
......@@ -2369,16 +2368,10 @@ static int gpmc_probe(struct platform_device *pdev)
goto setup_irq_failed;
}
rc = gpmc_probe_dt_children(pdev);
if (rc < 0) {
dev_err(gpmc->dev, "failed to probe DT children\n");
goto dt_children_failed;
}
gpmc_probe_dt_children(pdev);
return 0;
dt_children_failed:
gpmc_free_irq(gpmc);
setup_irq_failed:
gpmc_gpio_exit(gpmc);
gpio_init_failed:
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7