power management: implement pm_ops.valid for everybody

Almost all users of pm_ops only support mem sleep, don't check in .valid and
don't reject any others in .prepare so users can be confused if they check
/sys/power/state, especially when new states are added (these would then
result in s-t-r although they're supposed to be something different).

This patch implements a generic pm_valid_only_mem function that is then
exported for users and puts it to use in almost all existing pm_ops.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: linux-pm@lists.linux-foundation.org
Cc: Len Brown <lenb@kernel.org>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Cc: Greg KH <greg@kroah.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arch/arm/common/sharpsl_pm.c

@@ -769,6 +769,7 @@ static struct pm_ops sharpsl_pm_ops = {
 	.prepare	= pxa_pm_prepare,
 	.enter		= corgi_pxa_pm_enter,
 	.finish		= pxa_pm_finish,
+	.valid		= pm_valid_only_mem,
 };
 
 static int __init sharpsl_pm_probe(struct platform_device *pdev)

arch/arm/mach-omap1/pm.c

@@ -701,6 +701,7 @@ static struct pm_ops omap_pm_ops ={
 	.prepare	= omap_pm_prepare,
 	.enter		= omap_pm_enter,
 	.finish		= omap_pm_finish,
+	.valid		= pm_valid_only_mem,
 };
 
 static int __init omap_pm_init(void)

arch/arm/mach-omap2/pm.c

@@ -373,6 +373,7 @@ static struct pm_ops omap_pm_ops = {
 	.prepare	= omap2_pm_prepare,
 	.enter		= omap2_pm_enter,
 	.finish		= omap2_pm_finish,
+	.valid		= pm_valid_only_mem,
 };
 
 int __init omap2_pm_init(void)

arch/arm/mach-pnx4008/pm.c

@@ -107,50 +107,19 @@ static int pnx4008_pm_enter(suspend_state_t state)
 	case PM_SUSPEND_MEM:
 		pnx4008_suspend();
 		break;
-	case PM_SUSPEND_DISK:
-		return -ENOTSUPP;
-	default:
-		return -EINVAL;
 	}
 	return 0;
 }
 
-/*
- * Called after processes are frozen, but before we shut down devices.
- */
-static int pnx4008_pm_prepare(suspend_state_t state)
-{
-	switch (state) {
-	case PM_SUSPEND_STANDBY:
-	case PM_SUSPEND_MEM:
-		break;
-
-	case PM_SUSPEND_DISK:
-		return -ENOTSUPP;
-		break;
-
-	default:
-		return -EINVAL;
-		break;
-	}
-	return 0;
-}
-
-/*
- * Called after devices are re-setup, but before processes are thawed.
- */
-static int pnx4008_pm_finish(suspend_state_t state)
+static int pnx4008_pm_valid(suspend_state_t state)
 {
-	return 0;
+	return (state == PM_SUSPEND_STANDBY) ||
+	       (state == PM_SUSPEND_MEM);
 }
 
-/*
- * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk.
- */
 static struct pm_ops pnx4008_pm_ops = {
-	.prepare = pnx4008_pm_prepare,
 	.enter = pnx4008_pm_enter,
-	.finish = pnx4008_pm_finish,
+	.valid = pnx4008_pm_valid,
 };
 
 static int __init pnx4008_pm_init(void)

arch/arm/mach-pxa/pm.c

@@ -227,6 +227,7 @@ static struct pm_ops pxa_pm_ops = {
 	.prepare	= pxa_pm_prepare,
 	.enter		= pxa_pm_enter,
 	.finish		= pxa_pm_finish,
+	.valid		= pm_valid_only_mem,
 };
 
 static int __init pxa_pm_init(void)

arch/arm/mach-sa1100/pm.c

@@ -133,6 +133,7 @@ unsigned long sleep_phys_sp(void *sp)
 
 static struct pm_ops sa11x0_pm_ops = {
 	.enter		= sa11x0_pm_enter,
+	.valid		= pm_valid_only_mem,
 };
 
 static int __init sa11x0_pm_init(void)

arch/arm/plat-s3c24xx/pm.c

@@ -612,26 +612,9 @@ static int s3c2410_pm_enter(suspend_state_t state)
 	return 0;
 }
 
-/*
- * Called after processes are frozen, but before we shut down devices.
- */
-static int s3c2410_pm_prepare(suspend_state_t state)
-{
-	return 0;
-}
-
-/*
- * Called after devices are re-setup, but before processes are thawed.
- */
-static int s3c2410_pm_finish(suspend_state_t state)
-{
-	return 0;
-}
-
 static struct pm_ops s3c2410_pm_ops = {
-	.prepare	= s3c2410_pm_prepare,
 	.enter		= s3c2410_pm_enter,
-	.finish		= s3c2410_pm_finish,
+	.valid		= pm_valid_only_mem,
 };
 
 /* s3c2410_pm_init

arch/sh/boards/hp6xx/pm.c

@@ -69,6 +69,7 @@ static int hp6x0_pm_enter(suspend_state_t state)
 
 static struct pm_ops hp6x0_pm_ops = {
 	.enter		= hp6x0_pm_enter,
+	.valid		= pm_valid_only_mem,
 };
 
 static int __init hp6x0_pm_init(void)

drivers/acpi/sleep/main.c

@@ -168,9 +168,18 @@ int acpi_suspend(u32 acpi_state)
 
 static int acpi_pm_state_valid(suspend_state_t pm_state)
 {
-	u32 acpi_state = acpi_suspend_states[pm_state];
+	u32 acpi_state;
+
+	switch (pm_state) {
+	case PM_SUSPEND_ON:
+	case PM_SUSPEND_STANDBY:
+	case PM_SUSPEND_MEM:
+		acpi_state = acpi_suspend_states[pm_state];
 
 		return sleep_states[acpi_state];
+	default:
+		return 0;
+	}
 }
 
 static struct pm_ops acpi_pm_ops = {

include/linux/pm.h

@@ -128,6 +128,9 @@ typedef int __bitwise suspend_disk_method_t;
  *	always valid and never passed to this call.
  *	If not assigned, all suspend states are advertised as valid
  *	in /sys/power/state (but can still be rejected by prepare or enter.)
+ *	Since new states can be added for other platforms, you should
+ *	assign this callback. There is a %pm_valid_only_mem function
+ *	available if you only implemented mem sleep.
  *
  * @prepare: Prepare the platform for the given suspend state. Can return a
  *	negative error code if necessary.
@@ -165,6 +168,7 @@ extern void pm_set_ops(struct pm_ops *pm_ops);
 extern struct pm_ops *pm_ops;
 extern int pm_suspend(suspend_state_t state);
 
+extern int pm_valid_only_mem(suspend_state_t state);
 
 /**
  * arch_suspend_disable_irqs - disable IRQs for suspend

kernel/power/main.c

@@ -48,6 +48,19 @@ void pm_set_ops(struct pm_ops * ops)
 	mutex_unlock(&pm_mutex);
 }
 
+/**
+ * pm_valid_only_mem - generic memory-only valid callback
+ *
+ * pm_ops drivers that implement mem suspend only and only need
+ * to check for that in their .valid callback can use this instead
+ * of rolling their own .valid callback.
+ */
+int pm_valid_only_mem(suspend_state_t state)
+{
+	return state == PM_SUSPEND_MEM;
+}
+
+
 static inline void pm_finish(suspend_state_t state)
 {
 	if (pm_ops->finish)