arm64: dts: clearfog-gt-8k: add wlan_disable signal hog

There is currently no DT binding for GPIO rfkill signals. To make
mini-PCIe attached WiFi devices work, use gpio-hog to hold the
wlan_disable signal de-asserted.
Signed-off-by: Thomas Schreiber <tschreibe@gmail.com>
[baruch: add pinctrl node; rename tag]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts

@@ -226,6 +226,11 @@ cp0_tpm_irq_pins: tpm-irq-pins {
 		marvell,function = "gpio";
 	};
 
+	cp0_wlan_disable_pins: wlan-disable-pins {
+		marvell,pins = "mpp51";
+		marvell,function = "gpio";
+	};
+
 	cp0_sdhci_pins: sdhci-pins {
 		marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
 			       "mpp60", "mpp61";
@@ -235,7 +240,7 @@ cp0_sdhci_pins: sdhci-pins {
 
 &cp0_pcie0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_pci0_reset_pins>;
+	pinctrl-0 = <&cp0_pci0_reset_pins &cp0_wlan_disable_pins>;
 	reset-gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
@@ -253,6 +258,12 @@ lte_reset {
 		output-low;
 	};
 
+	wlan_disable {
+		gpio-hog;
+		gpios = <19 GPIO_ACTIVE_LOW>;
+		output-low;
+	};
+
 	lte_disable {
 		gpio-hog;
 		gpios = <21 GPIO_ACTIVE_LOW>;