Commit e988d35a authored by Christian Lütke-Stetzkamp's avatar Christian Lütke-Stetzkamp Committed by Greg Kroah-Hartman

staging: mt7621-mmc: Replace sdr_read32 with readl

The current code uses a macro (sdr_read32) for reading from hardware,
but it is only a readl, so replace it to get nearer to upstream code.
Signed-off-by: default avatarChristian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 8fbcf120
......@@ -948,7 +948,6 @@ struct msdc_host {
};
#define sdr_read8(reg) readb(reg)
#define sdr_read32(reg) readl(reg)
#define sdr_write8(reg, val) writeb(val, reg)
static inline void sdr_set_bits(void __iomem *reg, u32 bs)
......
......@@ -167,13 +167,13 @@ static void msdc_reset_hw(struct msdc_host *host)
void __iomem *base = host->base;
sdr_set_bits(MSDC_CFG, MSDC_CFG_RST);
while (sdr_read32(MSDC_CFG) & MSDC_CFG_RST)
while (readl(MSDC_CFG) & MSDC_CFG_RST)
cpu_relax();
}
#define msdc_clr_int() \
do { \
volatile u32 val = sdr_read32(MSDC_INT); \
volatile u32 val = readl(MSDC_INT); \
writel(val, MSDC_INT); \
} while (0)
......@@ -181,12 +181,12 @@ static void msdc_reset_hw(struct msdc_host *host)
do { \
int retry = 3, cnt = 1000; \
sdr_set_bits(MSDC_FIFOCS, MSDC_FIFOCS_CLR); \
msdc_retry(sdr_read32(MSDC_FIFOCS) & MSDC_FIFOCS_CLR, retry, cnt); \
msdc_retry(readl(MSDC_FIFOCS) & MSDC_FIFOCS_CLR, retry, cnt); \
} while (0)
#define msdc_irq_save(val) \
do { \
val = sdr_read32(MSDC_INTEN); \
val = readl(MSDC_INTEN); \
sdr_clr_bits(MSDC_INTEN, val); \
} while (0)
......@@ -230,8 +230,8 @@ static u32 hclks[] = {50000000}; /* +/- by chhung */
(void)hwPowerDown(MT65XX_POWER_LDO_VMCH, "SD"); \
} while (0)
#define sdc_is_busy() (sdr_read32(SDC_STS) & SDC_STS_SDCBUSY)
#define sdc_is_cmd_busy() (sdr_read32(SDC_STS) & SDC_STS_CMDBUSY)
#define sdc_is_busy() (readl(SDC_STS) & SDC_STS_SDCBUSY)
#define sdc_is_cmd_busy() (readl(SDC_STS) & SDC_STS_CMDBUSY)
#define sdc_send_cmd(cmd, arg) \
do { \
......@@ -240,7 +240,7 @@ static u32 hclks[] = {50000000}; /* +/- by chhung */
} while (0)
// can modify to read h/w register.
//#define is_card_present(h) ((sdr_read32(MSDC_PS) & MSDC_PS_CDSTS) ? 0 : 1);
//#define is_card_present(h) ((readl(MSDC_PS) & MSDC_PS_CDSTS) ? 0 : 1);
#define is_card_present(h) (((struct msdc_host *)(h))->card_inserted)
/* +++ by chhung */
......@@ -426,7 +426,7 @@ static void msdc_tasklet_card(struct work_struct *work)
spin_lock(&host->lock);
status = sdr_read32(MSDC_PS);
status = readl(MSDC_PS);
if (cd_active_low)
inserted = (status & MSDC_PS_CDSTS) ? 0 : 1;
else
......@@ -469,8 +469,8 @@ static void msdc_select_clksrc(struct msdc_host *host, unsigned char clksrc)
BUG_ON(clksrc > 3);
INIT_MSG("set clock source to <%d>", clksrc);
val = sdr_read32(MSDC_CLKSRC_REG);
if (sdr_read32(MSDC_ECO_VER) >= 4) {
val = readl(MSDC_CLKSRC_REG);
if (readl(MSDC_ECO_VER) >= 4) {
val &= ~(0x3 << clk_src_bit[host->id]);
val |= clksrc << clk_src_bit[host->id];
} else {
......@@ -531,7 +531,7 @@ static void msdc_set_mclk(struct msdc_host *host, int ddr, unsigned int hz)
sdr_set_field(MSDC_CFG, MSDC_CFG_CKDIV, div);
/* wait clock stable */
while (!(sdr_read32(MSDC_CFG) & MSDC_CFG_CKSTB))
while (!(readl(MSDC_CFG) & MSDC_CFG_CKSTB))
cpu_relax();
host->sclk = sclk;
......@@ -940,7 +940,7 @@ static unsigned int msdc_command_resp(struct msdc_host *host,
/* memory card CRC */
if (host->hw->flags & MSDC_REMOVABLE && cmd->error == -EIO) {
if (sdr_read32(SDC_CMD) & 0x1800) { /* check if has data phase */
if (readl(SDC_CMD) & 0x1800) { /* check if has data phase */
msdc_abort_data(host);
} else {
/* do basic: reset*/
......@@ -953,7 +953,7 @@ static unsigned int msdc_command_resp(struct msdc_host *host,
// check DAT0
/* if (resp == RESP_R1B) {
while ((sdr_read32(MSDC_PS) & 0x10000) != 0x10000);
while ((readl(MSDC_PS) & 0x10000) != 0x10000);
} */
/* CMD12 Error Handle */
......@@ -1007,11 +1007,11 @@ static void msdc_dma_stop(struct msdc_host *host)
//u32 retries=500;
u32 wints = MSDC_INTEN_XFER_COMPL | MSDC_INTEN_DATTMO | MSDC_INTEN_DATCRCERR;
N_MSG(DMA, "DMA status: 0x%.8x", sdr_read32(MSDC_DMA_CFG));
//while (sdr_read32(MSDC_DMA_CFG) & MSDC_DMA_CFG_STS);
N_MSG(DMA, "DMA status: 0x%.8x", readl(MSDC_DMA_CFG));
//while (readl(MSDC_DMA_CFG) & MSDC_DMA_CFG_STS);
sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_STOP, 1);
while (sdr_read32(MSDC_DMA_CFG) & MSDC_DMA_CFG_STS)
while (readl(MSDC_DMA_CFG) & MSDC_DMA_CFG_STS)
;
//dsb(); /* --- by chhung */
......@@ -1101,9 +1101,9 @@ static void msdc_dma_config(struct msdc_host *host, struct msdc_dma *dma)
break;
}
N_MSG(DMA, "DMA_CTRL = 0x%x", sdr_read32(MSDC_DMA_CTRL));
N_MSG(DMA, "DMA_CFG = 0x%x", sdr_read32(MSDC_DMA_CFG));
N_MSG(DMA, "DMA_SA = 0x%x", sdr_read32(MSDC_DMA_SA));
N_MSG(DMA, "DMA_CTRL = 0x%x", readl(MSDC_DMA_CTRL));
N_MSG(DMA, "DMA_CFG = 0x%x", readl(MSDC_DMA_CFG));
N_MSG(DMA, "DMA_SA = 0x%x", readl(MSDC_DMA_SA));
}
......@@ -1200,10 +1200,10 @@ static int msdc_do_request(struct mmc_host *mmc, struct mmc_request *mrq)
spin_unlock(&host->lock);
if (!wait_for_completion_timeout(&host->xfer_done, DAT_TIMEOUT)) {
ERR_MSG("XXX CMD<%d> wait xfer_done<%d> timeout!!", cmd->opcode, data->blocks * data->blksz);
ERR_MSG(" DMA_SA = 0x%x", sdr_read32(MSDC_DMA_SA));
ERR_MSG(" DMA_CA = 0x%x", sdr_read32(MSDC_DMA_CA));
ERR_MSG(" DMA_CTRL = 0x%x", sdr_read32(MSDC_DMA_CTRL));
ERR_MSG(" DMA_CFG = 0x%x", sdr_read32(MSDC_DMA_CFG));
ERR_MSG(" DMA_SA = 0x%x", readl(MSDC_DMA_SA));
ERR_MSG(" DMA_CA = 0x%x", readl(MSDC_DMA_CA));
ERR_MSG(" DMA_CTRL = 0x%x", readl(MSDC_DMA_CTRL));
ERR_MSG(" DMA_CFG = 0x%x", readl(MSDC_DMA_CFG));
data->error = -ETIMEDOUT;
msdc_reset_hw(host);
......@@ -1346,7 +1346,7 @@ static int msdc_tune_cmdrsp(struct msdc_host *host, struct mmc_command *cmd)
}
/* should be EIO */
if (sdr_read32(SDC_CMD) & 0x1800) { /* check if has data phase */
if (readl(SDC_CMD) & 0x1800) { /* check if has data phase */
msdc_abort_data(host);
}
}
......@@ -1406,7 +1406,7 @@ static int msdc_tune_bread(struct mmc_host *mmc, struct mmc_request *mrq)
dcrc &= ~SDC_DCRC_STS_NEG;
ERR_MSG("TUNE_BREAD<%s> dcrc<0x%x> DATRDDLY0/1<0x%x><0x%x> dsmpl<0x%x>",
(result == 0 && dcrc == 0) ? "PASS" : "FAIL", dcrc,
sdr_read32(MSDC_DAT_RDDLY0), sdr_read32(MSDC_DAT_RDDLY1), cur_dsmpl);
readl(MSDC_DAT_RDDLY0), readl(MSDC_DAT_RDDLY1), cur_dsmpl);
/* Fix me: result is 0, but dcrc is still exist */
if (result == 0 && dcrc == 0) {
......@@ -1422,11 +1422,11 @@ static int msdc_tune_bread(struct mmc_host *mmc, struct mmc_request *mrq)
}
}
cur_rxdly0 = sdr_read32(MSDC_DAT_RDDLY0);
cur_rxdly1 = sdr_read32(MSDC_DAT_RDDLY1);
cur_rxdly0 = readl(MSDC_DAT_RDDLY0);
cur_rxdly1 = readl(MSDC_DAT_RDDLY1);
/* E1 ECO. YD: Reverse */
if (sdr_read32(MSDC_ECO_VER) >= 4) {
if (readl(MSDC_ECO_VER) >= 4) {
orig_dat0 = (cur_rxdly0 >> 24) & 0x1F;
orig_dat1 = (cur_rxdly0 >> 16) & 0x1F;
orig_dat2 = (cur_rxdly0 >> 8) & 0x1F;
......@@ -1494,10 +1494,10 @@ static int msdc_tune_bwrite(struct mmc_host *mmc, struct mmc_request *mrq)
/* Tune Method 2. just DAT0 */
sdr_set_field(MSDC_IOCON, MSDC_IOCON_DDLSEL, 1);
cur_rxdly0 = sdr_read32(MSDC_DAT_RDDLY0);
cur_rxdly0 = readl(MSDC_DAT_RDDLY0);
/* E1 ECO. YD: Reverse */
if (sdr_read32(MSDC_ECO_VER) >= 4) {
if (readl(MSDC_ECO_VER) >= 4) {
orig_dat0 = (cur_rxdly0 >> 24) & 0x1F;
orig_dat1 = (cur_rxdly0 >> 16) & 0x1F;
orig_dat2 = (cur_rxdly0 >> 8) & 0x1F;
......@@ -1708,7 +1708,7 @@ static void msdc_ops_request(struct mmc_host *mmc, struct mmc_request *mrq)
static void msdc_set_buswidth(struct msdc_host *host, u32 width)
{
void __iomem *base = host->base;
u32 val = sdr_read32(SDC_CFG);
u32 val = readl(SDC_CFG);
val &= ~SDC_CFG_BUSWIDTH;
......@@ -1808,7 +1808,7 @@ static int msdc_ops_get_ro(struct mmc_host *mmc)
if (host->hw->flags & MSDC_WP_PIN_EN) { /* set for card */
spin_lock_irqsave(&host->lock, flags);
ro = (sdr_read32(MSDC_PS) >> 31);
ro = (readl(MSDC_PS) >> 31);
spin_unlock_irqrestore(&host->lock, flags);
}
return ro;
......@@ -1843,9 +1843,9 @@ static int msdc_ops_get_cd(struct mmc_host *mmc)
#else
// CD
if (cd_active_low)
present = (sdr_read32(MSDC_PS) & MSDC_PS_CDSTS) ? 0 : 1;
present = (readl(MSDC_PS) & MSDC_PS_CDSTS) ? 0 : 1;
else
present = (sdr_read32(MSDC_PS) & MSDC_PS_CDSTS) ? 1 : 0;
present = (readl(MSDC_PS) & MSDC_PS_CDSTS) ? 1 : 0;
host->card_inserted = present;
#endif
spin_unlock_irqrestore(&host->lock, flags);
......@@ -1879,8 +1879,8 @@ static irqreturn_t msdc_irq(int irq, void *dev_id)
MSDC_INT_ACMD19_DONE;
u32 datsts = MSDC_INT_DATCRCERR | MSDC_INT_DATTMO;
u32 intsts = sdr_read32(MSDC_INT);
u32 inten = sdr_read32(MSDC_INTEN); inten &= intsts;
u32 intsts = readl(MSDC_INT);
u32 inten = readl(MSDC_INTEN); inten &= intsts;
writel(intsts, MSDC_INT); /* clear interrupts */
/* MSG will cause fatal error */
......@@ -1917,11 +1917,11 @@ static irqreturn_t msdc_irq(int irq, void *dev_id)
IRQ_MSG("XXX CMD<%d> MSDC_INT_DATTMO", host->mrq->cmd->opcode);
data->error = -ETIMEDOUT;
} else if (intsts & MSDC_INT_DATCRCERR) {
IRQ_MSG("XXX CMD<%d> MSDC_INT_DATCRCERR, SDC_DCRC_STS<0x%x>", host->mrq->cmd->opcode, sdr_read32(SDC_DCRC_STS));
IRQ_MSG("XXX CMD<%d> MSDC_INT_DATCRCERR, SDC_DCRC_STS<0x%x>", host->mrq->cmd->opcode, readl(SDC_DCRC_STS));
data->error = -EIO;
}
//if(sdr_read32(MSDC_INTEN) & MSDC_INT_XFER_COMPL) {
//if(readl(MSDC_INTEN) & MSDC_INT_XFER_COMPL) {
complete(&host->xfer_done); /* Read CRC come fast, XFER_COMPL not enabled */
}
}
......@@ -1936,14 +1936,14 @@ static irqreturn_t msdc_irq(int irq, void *dev_id)
case RESP_NONE:
break;
case RESP_R2:
*rsp++ = sdr_read32(SDC_RESP3); *rsp++ = sdr_read32(SDC_RESP2);
*rsp++ = sdr_read32(SDC_RESP1); *rsp++ = sdr_read32(SDC_RESP0);
*rsp++ = readl(SDC_RESP3); *rsp++ = readl(SDC_RESP2);
*rsp++ = readl(SDC_RESP1); *rsp++ = readl(SDC_RESP0);
break;
default: /* Response types 1, 3, 4, 5, 6, 7(1b) */
if ((intsts & MSDC_INT_ACMDRDY) || (intsts & MSDC_INT_ACMD19_DONE))
*rsp = sdr_read32(SDC_ACMD_RESP);
*rsp = readl(SDC_ACMD_RESP);
else
*rsp = sdr_read32(SDC_RESP0);
*rsp = readl(SDC_RESP0);
break;
}
} else if ((intsts & MSDC_INT_RSPCRCERR) || (intsts & MSDC_INT_ACMDCRCERR)) {
......@@ -1967,7 +1967,7 @@ static irqreturn_t msdc_irq(int irq, void *dev_id)
/* mmc irq interrupts */
if (intsts & MSDC_INT_MMCIRQ)
printk(KERN_INFO "msdc[%d] MMCIRQ: SDC_CSTS=0x%.8x\r\n", host->id, sdr_read32(SDC_CSTS));
printk(KERN_INFO "msdc[%d] MMCIRQ: SDC_CSTS=0x%.8x\r\n", host->id, readl(SDC_CSTS));
#ifdef MT6575_SD_DEBUG
{
......@@ -2077,8 +2077,8 @@ static void msdc_init_hw(struct msdc_host *host)
sdr_clr_bits(MSDC_PS, MSDC_PS_CDEN);
/* Disable and clear all interrupts */
sdr_clr_bits(MSDC_INTEN, sdr_read32(MSDC_INTEN));
writel(sdr_read32(MSDC_INT), MSDC_INT);
sdr_clr_bits(MSDC_INTEN, readl(MSDC_INTEN));
writel(readl(MSDC_INT), MSDC_INT);
#if 1
/* reset tuning parameter */
......@@ -2095,7 +2095,7 @@ static void msdc_init_hw(struct msdc_host *host)
writel(0x003C000F, MSDC_PATCH_BIT0); /* bit0 modified: Rx Data Clock Source: 1 -> 2.0*/
#endif
if (sdr_read32(MSDC_ECO_VER) >= 4) {
if (readl(MSDC_ECO_VER) >= 4) {
if (host->id == 1) {
sdr_set_field(MSDC_PATCH_BIT1, MSDC_PATCH_BIT1_WRDAT_CRCS, 1);
sdr_set_field(MSDC_PATCH_BIT1, MSDC_PATCH_BIT1_CMD_RSP, 1);
......@@ -2156,8 +2156,8 @@ static void msdc_deinit_hw(struct msdc_host *host)
void __iomem *base = host->base;
/* Disable and clear all interrupts */
sdr_clr_bits(MSDC_INTEN, sdr_read32(MSDC_INTEN));
writel(sdr_read32(MSDC_INT), MSDC_INT);
sdr_clr_bits(MSDC_INTEN, readl(MSDC_INTEN));
writel(readl(MSDC_INT), MSDC_INT);
/* Disable card detection */
msdc_enable_cd_irq(host, 0);
......@@ -2419,7 +2419,7 @@ static int __init mt_msdc_init(void)
// Set the pins for sdxc to sdxc mode
//FIXME: this should be done by pinctl and not by the sd driver
reg = sdr_read32((void __iomem *)(RALINK_SYSCTL_BASE + 0x60)) & ~(0x3 << 18);
reg = readl((void __iomem *)(RALINK_SYSCTL_BASE + 0x60)) & ~(0x3 << 18);
writel(reg, (void __iomem *)(RALINK_SYSCTL_BASE + 0x60));
ret = platform_driver_register(&mt_msdc_driver);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment