Commit e9a5475e authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab Committed by David S. Miller

docs: networking: device drivers: convert ti/tlan.txt to ReST

- add SPDX header;
- adjust titles and chapters, adding proper markups;
- mark tables as such;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank lines where needed;
- add to networking/index.rst.
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 6f22789d
......@@ -49,6 +49,7 @@ Contents:
smsc/smc9
ti/cpsw_switchdev
ti/cpsw
ti/tlan
.. only:: subproject and html
......
.. SPDX-License-Identifier: GPL-2.0
=====================
TLAN driver for Linux
=====================
:Version: 1.14a
(C) 1997-1998 Caldera, Inc.
(C) 1998 James Banks
(C) 1999-2001 Torben Mathiasen <tmm@image.dk, torben.mathiasen@compaq.com>
For driver information/updates visit http://www.compaq.com
TLAN driver for Linux, version 1.14a
README
I. Supported Devices.
I. Supported Devices
====================
Only PCI devices will work with this driver.
Supported:
========= ========= ===========================================
Vendor ID Device ID Name
========= ========= ===========================================
0e11 ae32 Compaq Netelligent 10/100 TX PCI UTP
0e11 ae34 Compaq Netelligent 10 T PCI UTP
0e11 ae35 Compaq Integrated NetFlex 3/P
......@@ -28,6 +41,7 @@ I. Supported Devices.
108d 0012 Olicom OC-2325
108d 0013 Olicom OC-2183
108d 0014 Olicom OC-2326
========= ========= ===========================================
Caveats:
......@@ -44,14 +58,18 @@ I. Supported Devices.
II. Driver Options
==================
1. You can append debug=x to the end of the insmod line to get
debug messages, where x is a bit field where the bits mean
the following:
==== =====================================
0x01 Turn on general debugging messages.
0x02 Turn on receive debugging messages.
0x04 Turn on transmit debugging messages.
0x08 Turn on list debugging messages.
==== =====================================
2. You can append aui=1 to the end of the insmod line to cause
the adapter to use the AUI interface instead of the 10 Base T
......@@ -75,7 +93,7 @@ II. Driver Options
6. If the driver is built into the kernel, you can use the 3rd
and 4th parameters to set aui and debug respectively. For
example:
example::
ether=0,0,0x1,0x7,eth0
......@@ -84,11 +102,13 @@ II. Driver Options
The bits in the third byte are assigned as follows:
0x01 = aui
0x02 = use half duplex
0x04 = use full duplex
0x08 = use 10BaseT
0x10 = use 100BaseTx
==== ===============
0x01 aui
0x02 use half duplex
0x04 use full duplex
0x08 use 10BaseT
0x10 use 100BaseTx
==== ===============
You also need to set both speed and duplex settings when forcing
speeds with kernel-parameters.
......@@ -96,7 +116,7 @@ II. Driver Options
7. If you have more than one tlan adapter in your system, you can
use the above options on a per adapter basis. To force a 100Mbit/HD
link with your eth1 adapter use:
link with your eth1 adapter use::
insmod tlan speed=0,100 duplex=0,1
......@@ -104,7 +124,9 @@ II. Driver Options
Note that the tlan driver supports a maximum of 8 adapters.
III. Things to try if you have problems.
III. Things to try if you have problems
=======================================
1. Make sure your card's PCI id is among those listed in
section I, above.
2. Make sure routing is correct.
......@@ -113,5 +135,6 @@ III. Things to try if you have problems.
There is also a tlan mailing list which you can join by sending "subscribe tlan"
in the body of an email to majordomo@vuser.vu.union.edu.
There is also a tlan website at http://www.compaq.com
......@@ -16971,7 +16971,7 @@ M: Samuel Chessman <chessman@tux.org>
L: tlan-devel@lists.sourceforge.net (subscribers-only)
S: Maintained
W: http://sourceforge.net/projects/tlan/
F: Documentation/networking/device_drivers/ti/tlan.txt
F: Documentation/networking/device_drivers/ti/tlan.rst
F: drivers/net/ethernet/ti/tlan.*
TM6000 VIDEO4LINUX DRIVER
......
......@@ -138,7 +138,7 @@ config TLAN
Devices currently supported by this driver are Compaq Netelligent,
Compaq NetFlex and Olicom cards. Please read the file
<file:Documentation/networking/device_drivers/ti/tlan.txt>
<file:Documentation/networking/device_drivers/ti/tlan.rst>
for more details.
To compile this driver as a module, choose M here. The module
......
......@@ -70,7 +70,7 @@ MODULE_DESCRIPTION("Driver for TI ThunderLAN based ethernet PCI adapters");
MODULE_LICENSE("GPL");
/* Turn on debugging.
* See Documentation/networking/device_drivers/ti/tlan.txt for details
* See Documentation/networking/device_drivers/ti/tlan.rst for details
*/
static int debug;
module_param(debug, int, 0);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment