Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  mmc: warn about voltage mismatches
  mmc_spi: Add support for OpenFirmware bindings
  pxamci: fix dma_unmap_sg length
  mmc_block: ensure all sectors that do not have errors are read
  drivers/mmc: Move a dereference below a NULL test
  sdhci: handle built-in sdhci with modular leds class
  mmc: balanc pci_iomap with pci_iounmap
  mmc_block: print better error messages
  mmc: Add mmc_vddrange_to_ocrmask() helper function
  ricoh_mmc: Handle newer models of Ricoh controllers
  mmc: Add 8-bit bus width support
  sdhci: activate led support also when module
  mmc: trivial annotation of 'blocks'
  pci: use pci_ioremap_bar() in drivers/mmc
  sdricoh_cs: Add support for Bay Controller devices
  mmc: at91_mci: reorder timer setup and mmc_add_host() call

drivers/mmc/card/block.c

@@ -145,7 +145,7 @@ struct mmc_blk_request {
 static u32 mmc_sd_num_wr_blocks(struct mmc_card *card)
 {
 	int err;
-	u32 blocks;
+	__be32 blocks;
 
 	struct mmc_request mrq;
 	struct mmc_command cmd;
@@ -204,9 +204,24 @@ static u32 mmc_sd_num_wr_blocks(struct mmc_card *card)
 	if (cmd.error || data.error)
 		return (u32)-1;
 
-	blocks = ntohl(blocks);
+	return ntohl(blocks);
+}
 
-	return blocks;
+static u32 get_card_status(struct mmc_card *card, struct request *req)
+{
+	struct mmc_command cmd;
+	int err;
+
+	memset(&cmd, 0, sizeof(struct mmc_command));
+	cmd.opcode = MMC_SEND_STATUS;
+	if (!mmc_host_is_spi(card->host))
+		cmd.arg = card->rca << 16;
+	cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC;
+	err = mmc_wait_for_cmd(card->host, &cmd, 0);
+	if (err)
+		printk(KERN_ERR "%s: error %d sending status comand",
+		       req->rq_disk->disk_name, err);
+	return cmd.resp[0];
 }
 
 static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
@@ -214,13 +229,13 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 	struct mmc_blk_data *md = mq->data;
 	struct mmc_card *card = md->queue.card;
 	struct mmc_blk_request brq;
-	int ret = 1;
+	int ret = 1, disable_multi = 0;
 
 	mmc_claim_host(card->host);
 
 	do {
 		struct mmc_command cmd;
-		u32 readcmd, writecmd;
+		u32 readcmd, writecmd, status = 0;
 
 		memset(&brq, 0, sizeof(struct mmc_blk_request));
 		brq.mrq.cmd = &brq.cmd;
@@ -236,6 +251,14 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 		brq.stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
 		brq.data.blocks = req->nr_sectors;
 
+		/*
+		 * After a read error, we redo the request one sector at a time
+		 * in order to accurately determine which sectors can be read
+		 * successfully.
+		 */
+		if (disable_multi && brq.data.blocks > 1)
+			brq.data.blocks = 1;
+
 		if (brq.data.blocks > 1) {
 			/* SPI multiblock writes terminate using a special
 			 * token, not a STOP_TRANSMISSION request.
@@ -264,6 +287,25 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 		brq.data.sg = mq->sg;
 		brq.data.sg_len = mmc_queue_map_sg(mq);
 
+		/*
+		 * Adjust the sg list so it is the same size as the
+		 * request.
+		 */
+		if (brq.data.blocks != req->nr_sectors) {
+			int i, data_size = brq.data.blocks << 9;
+			struct scatterlist *sg;
+
+			for_each_sg(brq.data.sg, sg, brq.data.sg_len, i) {
+				data_size -= sg->length;
+				if (data_size <= 0) {
+					sg->length += data_size;
+					i++;
+					break;
+				}
+			}
+			brq.data.sg_len = i;
+		}
+
 		mmc_queue_bounce_pre(mq);
 
 		mmc_wait_for_req(card->host, &brq.mrq);
@@ -275,19 +317,40 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 		 * until later as we need to wait for the card to leave
 		 * programming mode even when things go wrong.
 		 */
+		if (brq.cmd.error || brq.data.error || brq.stop.error) {
+			if (brq.data.blocks > 1 && rq_data_dir(req) == READ) {
+				/* Redo read one sector at a time */
+				printk(KERN_WARNING "%s: retrying using single "
+				       "block read\n", req->rq_disk->disk_name);
+				disable_multi = 1;
+				continue;
+			}
+			status = get_card_status(card, req);
+		}
+
 		if (brq.cmd.error) {
-			printk(KERN_ERR "%s: error %d sending read/write command\n",
-			       req->rq_disk->disk_name, brq.cmd.error);
+			printk(KERN_ERR "%s: error %d sending read/write "
+			       "command, response %#x, card status %#x\n",
+			       req->rq_disk->disk_name, brq.cmd.error,
+			       brq.cmd.resp[0], status);
 		}
 
 		if (brq.data.error) {
-			printk(KERN_ERR "%s: error %d transferring data\n",
-			       req->rq_disk->disk_name, brq.data.error);
+			if (brq.data.error == -ETIMEDOUT && brq.mrq.stop)
+				/* 'Stop' response contains card status */
+				status = brq.mrq.stop->resp[0];
+			printk(KERN_ERR "%s: error %d transferring data,"
+			       " sector %u, nr %u, card status %#x\n",
+			       req->rq_disk->disk_name, brq.data.error,
+			       (unsigned)req->sector,
+			       (unsigned)req->nr_sectors, status);
 		}
 
 		if (brq.stop.error) {
-			printk(KERN_ERR "%s: error %d sending stop command\n",
-			       req->rq_disk->disk_name, brq.stop.error);
+			printk(KERN_ERR "%s: error %d sending stop command, "
+			       "response %#x, card status %#x\n",
+			       req->rq_disk->disk_name, brq.stop.error,
+			       brq.stop.resp[0], status);
 		}
 
 		if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) {
@@ -320,8 +383,20 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 #endif
 		}
 
-		if (brq.cmd.error || brq.data.error || brq.stop.error)
+		if (brq.cmd.error || brq.stop.error || brq.data.error) {
+			if (rq_data_dir(req) == READ) {
+				/*
+				 * After an error, we redo I/O one sector at a
+				 * time, so we only reach here after trying to
+				 * read a single sector.
+				 */
+				spin_lock_irq(&md->lock);
+				ret = __blk_end_request(req, -EIO, brq.data.blksz);
+				spin_unlock_irq(&md->lock);
+				continue;
+			}
 			goto cmd_err;
+		}
 
 		/*
 		 * A block was successfully transferred.
@@ -343,11 +418,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 	 * If the card is not SD, we can still ok written sectors
 	 * as reported by the controller (which might be less than
 	 * the real number of written sectors, but never more).
-	 *
-	 * For reads we just fail the entire chunk as that should
-	 * be safe in all cases.
 	 */
-	if (rq_data_dir(req) != READ) {
 	if (mmc_card_sd(card)) {
 		u32 blocks;
 
@@ -362,7 +433,6 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 		ret = __blk_end_request(req, 0, brq.data.bytes_xfered);
 		spin_unlock_irq(&md->lock);
 	}
-	}
 
 	mmc_release_host(card->host);
 

drivers/mmc/core/core.c

@@ -20,6 +20,7 @@
 #include <linux/err.h>
 #include <linux/leds.h>
 #include <linux/scatterlist.h>
+#include <linux/log2.h>
 
 #include <linux/mmc/card.h>
 #include <linux/mmc/host.h>
@@ -448,6 +449,80 @@ void mmc_set_bus_width(struct mmc_host *host, unsigned int width)
 	mmc_set_ios(host);
 }
 
+/**
+ * mmc_vdd_to_ocrbitnum - Convert a voltage to the OCR bit number
+ * @vdd:	voltage (mV)
+ * @low_bits:	prefer low bits in boundary cases
+ *
+ * This function returns the OCR bit number according to the provided @vdd
+ * value. If conversion is not possible a negative errno value returned.
+ *
+ * Depending on the @low_bits flag the function prefers low or high OCR bits
+ * on boundary voltages. For example,
+ * with @low_bits = true, 3300 mV translates to ilog2(MMC_VDD_32_33);
+ * with @low_bits = false, 3300 mV translates to ilog2(MMC_VDD_33_34);
+ *
+ * Any value in the [1951:1999] range translates to the ilog2(MMC_VDD_20_21).
+ */
+static int mmc_vdd_to_ocrbitnum(int vdd, bool low_bits)
+{
+	const int max_bit = ilog2(MMC_VDD_35_36);
+	int bit;
+
+	if (vdd < 1650 || vdd > 3600)
+		return -EINVAL;
+
+	if (vdd >= 1650 && vdd <= 1950)
+		return ilog2(MMC_VDD_165_195);
+
+	if (low_bits)
+		vdd -= 1;
+
+	/* Base 2000 mV, step 100 mV, bit's base 8. */
+	bit = (vdd - 2000) / 100 + 8;
+	if (bit > max_bit)
+		return max_bit;
+	return bit;
+}
+
+/**
+ * mmc_vddrange_to_ocrmask - Convert a voltage range to the OCR mask
+ * @vdd_min:	minimum voltage value (mV)
+ * @vdd_max:	maximum voltage value (mV)
+ *
+ * This function returns the OCR mask bits according to the provided @vdd_min
+ * and @vdd_max values. If conversion is not possible the function returns 0.
+ *
+ * Notes wrt boundary cases:
+ * This function sets the OCR bits for all boundary voltages, for example
+ * [3300:3400] range is translated to MMC_VDD_32_33 | MMC_VDD_33_34 |
+ * MMC_VDD_34_35 mask.
+ */
+u32 mmc_vddrange_to_ocrmask(int vdd_min, int vdd_max)
+{
+	u32 mask = 0;
+
+	if (vdd_max < vdd_min)
+		return 0;
+
+	/* Prefer high bits for the boundary vdd_max values. */
+	vdd_max = mmc_vdd_to_ocrbitnum(vdd_max, false);
+	if (vdd_max < 0)
+		return 0;
+
+	/* Prefer low bits for the boundary vdd_min values. */
+	vdd_min = mmc_vdd_to_ocrbitnum(vdd_min, true);
+	if (vdd_min < 0)
+		return 0;
+
+	/* Fill the mask, from max bit to min bit. */
+	while (vdd_max >= vdd_min)
+		mask |= 1 << vdd_max--;
+
+	return mask;
+}
+EXPORT_SYMBOL(mmc_vddrange_to_ocrmask);
+
 /*
  * Mask off any voltages we don't support and select
  * the lowest voltage
@@ -467,6 +542,8 @@ u32 mmc_select_voltage(struct mmc_host *host, u32 ocr)
 		host->ios.vdd = bit;
 		mmc_set_ios(host);
 	} else {
+		pr_warning("%s: host doesn't support card's voltages\n",
+				mmc_hostname(host));
 		ocr = 0;
 	}
 

drivers/mmc/core/mmc.c

@@ -434,13 +434,24 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 	 * Activate wide bus (if supported).
 	 */
 	if ((card->csd.mmca_vsn >= CSD_SPEC_VER_4) &&
-		(host->caps & MMC_CAP_4_BIT_DATA)) {
+	    (host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) {
+		unsigned ext_csd_bit, bus_width;
+
+		if (host->caps & MMC_CAP_8_BIT_DATA) {
+			ext_csd_bit = EXT_CSD_BUS_WIDTH_8;
+			bus_width = MMC_BUS_WIDTH_8;
+		} else {
+			ext_csd_bit = EXT_CSD_BUS_WIDTH_4;
+			bus_width = MMC_BUS_WIDTH_4;
+		}
+
 		err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
-			EXT_CSD_BUS_WIDTH, EXT_CSD_BUS_WIDTH_4);
+				 EXT_CSD_BUS_WIDTH, ext_csd_bit);
+
 		if (err)
 			goto free_card;
 
-		mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4);
+		mmc_set_bus_width(card->host, bus_width);
 	}
 
 	if (!oldcard)
@@ -624,4 +635,3 @@ int mmc_attach_mmc(struct mmc_host *host, u32 ocr)
 
 	return err;
 }
-

drivers/mmc/host/Makefile

@@ -19,6 +19,9 @@ obj-$(CONFIG_MMC_AT91)		+= at91_mci.o
 obj-$(CONFIG_MMC_ATMELMCI)	+= atmel-mci.o
 obj-$(CONFIG_MMC_TIFM_SD)	+= tifm_sd.o
 obj-$(CONFIG_MMC_SPI)		+= mmc_spi.o
+ifeq ($(CONFIG_OF),y)
+obj-$(CONFIG_MMC_SPI)		+= of_mmc_spi.o
+endif
 obj-$(CONFIG_MMC_S3C)   	+= s3cmci.o
 obj-$(CONFIG_MMC_SDRICOH_CS)	+= sdricoh_cs.o
 obj-$(CONFIG_MMC_TMIO)		+= tmio_mmc.o

drivers/mmc/host/at91_mci.c

@@ -1088,6 +1088,8 @@ static int __init at91_mci_probe(struct platform_device *pdev)
 		goto fail0;
 	}
 
+	setup_timer(&host->timer, at91_timeout_timer, (unsigned long)host);
+
 	platform_set_drvdata(pdev, mmc);
 
 	/*
@@ -1101,8 +1103,6 @@ static int __init at91_mci_probe(struct platform_device *pdev)
 
 	mmc_add_host(mmc);
 
-	setup_timer(&host->timer, at91_timeout_timer, (unsigned long)host);
-
 	/*
 	 * monitor card insertion/removal if we can
 	 */

drivers/mmc/host/mmc_spi.c

@@ -1285,7 +1285,7 @@ static int mmc_spi_probe(struct spi_device *spi)
 	/* Platform data is used to hook up things like card sensing
 	 * and power switching gpios.
 	 */
-	host->pdata = spi->dev.platform_data;
+	host->pdata = mmc_spi_get_pdata(spi);
 	if (host->pdata)
 		mmc->ocr_avail = host->pdata->ocr_mask;
 	if (!mmc->ocr_avail) {
@@ -1368,6 +1368,7 @@ static int mmc_spi_probe(struct spi_device *spi)
 
 fail_nobuf1:
 	mmc_free_host(mmc);
+	mmc_spi_put_pdata(spi);
 	dev_set_drvdata(&spi->dev, NULL);
 
 nomem:
@@ -1402,6 +1403,7 @@ static int __devexit mmc_spi_remove(struct spi_device *spi)
 
 		spi->max_speed_hz = mmc->f_max;
 		mmc_free_host(mmc);
+		mmc_spi_put_pdata(spi);
 		dev_set_drvdata(&spi->dev, NULL);
 	}
 	return 0;

drivers/mmc/host/of_mmc_spi.c

+/*
+ * OpenFirmware bindings for the MMC-over-SPI driver
+ *
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/mmc_spi.h>
+#include <linux/mmc/core.h>
+#include <linux/mmc/host.h>
+
+enum {
+	CD_GPIO = 0,
+	WP_GPIO,
+	NUM_GPIOS,
+};
+
+struct of_mmc_spi {
+	int gpios[NUM_GPIOS];
+	bool alow_gpios[NUM_GPIOS];
+	struct mmc_spi_platform_data pdata;
+};
+
+static struct of_mmc_spi *to_of_mmc_spi(struct device *dev)
+{
+	return container_of(dev->platform_data, struct of_mmc_spi, pdata);
+}
+
+static int of_mmc_spi_read_gpio(struct device *dev, int gpio_num)
+{
+	struct of_mmc_spi *oms = to_of_mmc_spi(dev);
+	bool active_low = oms->alow_gpios[gpio_num];
+	bool value = gpio_get_value(oms->gpios[gpio_num]);
+
+	return active_low ^ value;
+}
+
+static int of_mmc_spi_get_cd(struct device *dev)
+{
+	return of_mmc_spi_read_gpio(dev, CD_GPIO);
+}
+
+static int of_mmc_spi_get_ro(struct device *dev)
+{
+	return of_mmc_spi_read_gpio(dev, WP_GPIO);
+}
+
+struct mmc_spi_platform_data *mmc_spi_get_pdata(struct spi_device *spi)
+{
+	struct device *dev = &spi->dev;
+	struct device_node *np = dev_archdata_get_node(&dev->archdata);
+	struct of_mmc_spi *oms;
+	const u32 *voltage_ranges;
+	int num_ranges;
+	int i;
+	int ret = -EINVAL;
+
+	if (dev->platform_data || !np)
+		return dev->platform_data;
+
+	oms = kzalloc(sizeof(*oms), GFP_KERNEL);
+	if (!oms)
+		return NULL;
+
+	voltage_ranges = of_get_property(np, "voltage-ranges", &num_ranges);
+	num_ranges = num_ranges / sizeof(*voltage_ranges) / 2;
+	if (!voltage_ranges || !num_ranges) {
+		dev_err(dev, "OF: voltage-ranges unspecified\n");
+		goto err_ocr;
+	}
+
+	for (i = 0; i < num_ranges; i++) {
+		const int j = i * 2;
+		u32 mask;
+
+		mask = mmc_vddrange_to_ocrmask(voltage_ranges[j],
+					       voltage_ranges[j + 1]);
+		if (!mask) {
+			ret = -EINVAL;
+			dev_err(dev, "OF: voltage-range #%d is invalid\n", i);
+			goto err_ocr;
+		}
+		oms->pdata.ocr_mask |= mask;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(oms->gpios); i++) {
+		enum of_gpio_flags gpio_flags;
+
+		oms->gpios[i] = of_get_gpio_flags(np, i, &gpio_flags);
+		if (!gpio_is_valid(oms->gpios[i]))
+			continue;
+
+		ret = gpio_request(oms->gpios[i], dev->bus_id);
+		if (ret < 0) {
+			oms->gpios[i] = -EINVAL;
+			continue;
+		}
+
+		if (gpio_flags & OF_GPIO_ACTIVE_LOW)
+			oms->alow_gpios[i] = true;
+	}
+
+	if (gpio_is_valid(oms->gpios[CD_GPIO]))
+		oms->pdata.get_cd = of_mmc_spi_get_cd;
+	if (gpio_is_valid(oms->gpios[WP_GPIO]))
+		oms->pdata.get_ro = of_mmc_spi_get_ro;
+
+	/* We don't support interrupts yet, let's poll. */
+	oms->pdata.caps |= MMC_CAP_NEEDS_POLL;
+
+	dev->platform_data = &oms->pdata;
+	return dev->platform_data;
+err_ocr:
+	kfree(oms);
+	return NULL;
+}
+EXPORT_SYMBOL(mmc_spi_get_pdata);
+
+void mmc_spi_put_pdata(struct spi_device *spi)
+{
+	struct device *dev = &spi->dev;
+	struct device_node *np = dev_archdata_get_node(&dev->archdata);
+	struct of_mmc_spi *oms = to_of_mmc_spi(dev);
+	int i;
+
+	if (!dev->platform_data || !np)
+		return;
+
+	for (i = 0; i < ARRAY_SIZE(oms->gpios); i++) {
+		if (gpio_is_valid(oms->gpios[i]))
+			gpio_free(oms->gpios[i]);
+	}
+	kfree(oms);
+	dev->platform_data = NULL;
+}
+EXPORT_SYMBOL(mmc_spi_put_pdata);

drivers/mmc/host/pxamci.c

@@ -283,7 +283,7 @@ static int pxamci_data_done(struct pxamci_host *host, unsigned int stat)
 		return 0;
 
 	DCSR(host->dma) = 0;
-	dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_len,
+	dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
 		     host->dma_dir);
 
 	if (stat & STAT_READ_TIME_OUT)

drivers/mmc/host/ricoh_mmc.c

@@ -11,9 +11,10 @@
 
 /*
  * This is a conceptually ridiculous driver, but it is required by the way
- * the Ricoh multi-function R5C832 works. This chip implements firewire
- * and four different memory card controllers. Two of those controllers are
- * an SDHCI controller and a proprietary MMC controller. The linux SDHCI
+ * the Ricoh multi-function chips (R5CXXX) work. These chips implement
+ * the four main memory card controllers (SD, MMC, MS, xD) and one or both
+ * of cardbus or firewire. It happens that they implement SD and MMC
+ * support as separate controllers (and PCI functions). The linux SDHCI
  * driver supports MMC cards but the chip detects MMC cards in hardware
  * and directs them to the MMC controller - so the SDHCI driver never sees
  * them. To get around this, we must disable the useless MMC controller.
@@ -21,8 +22,10 @@
  * a detection event occurs immediately, even if the MMC card is already
  * in the reader.
  *
- * The relevant registers live on the firewire function, so this is unavoidably
- * ugly. Such is life.
+ * It seems to be the case that the relevant PCI registers to deactivate the
+ * MMC controller live on PCI function 0, which might be the cardbus controller
+ * or the firewire controller, depending on the particular chip in question. As
+ * such, it makes what this driver has to do unavoidably ugly. Such is life.
  */
 
 #include <linux/pci.h>
@@ -143,6 +146,7 @@ static int __devinit ricoh_mmc_probe(struct pci_dev *pdev,
 		pci_get_device(PCI_VENDOR_ID_RICOH,
 			PCI_DEVICE_ID_RICOH_RL5C476, fw_dev))) {
 		if (PCI_SLOT(pdev->devfn) == PCI_SLOT(fw_dev->devfn) &&
+		    PCI_FUNC(fw_dev->devfn) == 0 &&
 		    pdev->bus == fw_dev->bus) {
 			if (ricoh_mmc_disable(fw_dev) != 0)
 				return -ENODEV;
@@ -160,6 +164,7 @@ static int __devinit ricoh_mmc_probe(struct pci_dev *pdev,
 	    (fw_dev = pci_get_device(PCI_VENDOR_ID_RICOH,
 					PCI_DEVICE_ID_RICOH_R5C832, fw_dev))) {
 		if (PCI_SLOT(pdev->devfn) == PCI_SLOT(fw_dev->devfn) &&
+		    PCI_FUNC(fw_dev->devfn) == 0 &&
 		    pdev->bus == fw_dev->bus) {
 			if (ricoh_mmc_disable(fw_dev) != 0)
 				return -ENODEV;
@@ -172,7 +177,7 @@ static int __devinit ricoh_mmc_probe(struct pci_dev *pdev,
 
 	if (!ctrlfound) {
 		printk(KERN_WARNING DRIVER_NAME
-		       ": Main firewire function not found. Cannot disable controller.\n");
+		       ": Main Ricoh function not found. Cannot disable controller.\n");
 		return -ENODEV;
 	}
 

drivers/mmc/host/sdhci-pci.c

@@ -545,7 +545,7 @@ static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot(
 	}
 
 	addr = pci_resource_start(pdev, bar);
-	host->ioaddr = ioremap_nocache(addr, pci_resource_len(pdev, bar));
+	host->ioaddr = pci_ioremap_bar(pdev, bar);
 	if (!host->ioaddr) {
 		dev_err(&pdev->dev, "failed to remap registers\n");
 		goto release;

drivers/mmc/host/sdhci.c

@@ -30,6 +30,11 @@
 #define DBG(f, x...) \
 	pr_debug(DRIVER_NAME " [%s()]: " f, __func__,## x)
 
+#if defined(CONFIG_LEDS_CLASS) || (defined(CONFIG_LEDS_CLASS_MODULE) && \
+	defined(CONFIG_MMC_SDHCI_MODULE))
+#define SDHCI_USE_LEDS_CLASS
+#endif
+
 static unsigned int debug_quirks = 0;
 
 static void sdhci_prepare_data(struct sdhci_host *, struct mmc_data *);
@@ -149,7 +154,7 @@ static void sdhci_deactivate_led(struct sdhci_host *host)
 	writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL);
 }
 
-#ifdef CONFIG_LEDS_CLASS
+#ifdef SDHCI_USE_LEDS_CLASS
 static void sdhci_led_control(struct led_classdev *led,
 	enum led_brightness brightness)
 {
@@ -994,7 +999,7 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
 
 	WARN_ON(host->mrq != NULL);
 
-#ifndef CONFIG_LEDS_CLASS
+#ifndef SDHCI_USE_LEDS_CLASS
 	sdhci_activate_led(host);
 #endif
 
@@ -1201,7 +1206,7 @@ static void sdhci_tasklet_finish(unsigned long param)
 	host->cmd = NULL;
 	host->data = NULL;
 
-#ifndef CONFIG_LEDS_CLASS
+#ifndef SDHCI_USE_LEDS_CLASS
 	sdhci_deactivate_led(host);
 #endif
 
@@ -1717,7 +1722,7 @@ int sdhci_add_host(struct sdhci_host *host)
 	sdhci_dumpregs(host);
 #endif
 
-#ifdef CONFIG_LEDS_CLASS
+#ifdef SDHCI_USE_LEDS_CLASS
 	host->led.name = mmc_hostname(mmc);
 	host->led.brightness = LED_OFF;
 	host->led.default_trigger = mmc_hostname(mmc);
@@ -1739,7 +1744,7 @@ int sdhci_add_host(struct sdhci_host *host)
 
 	return 0;
 
-#ifdef CONFIG_LEDS_CLASS
+#ifdef SDHCI_USE_LEDS_CLASS
 reset:
 	sdhci_reset(host, SDHCI_RESET_ALL);
 	free_irq(host->irq, host);
@@ -1775,7 +1780,7 @@ void sdhci_remove_host(struct sdhci_host *host, int dead)
 
 	mmc_remove_host(host->mmc);
 
-#ifdef CONFIG_LEDS_CLASS
+#ifdef SDHCI_USE_LEDS_CLASS
 	led_classdev_unregister(&host->led);
 #endif
 

drivers/mmc/host/sdhci.h

@@ -220,7 +220,7 @@ struct sdhci_host {
 	struct mmc_host		*mmc;		/* MMC structure */
 	u64			dma_mask;	/* custom DMA mask */
 
-#ifdef CONFIG_LEDS_CLASS
+#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
 	struct led_classdev	led;		/* LED control */
 #endif
 

drivers/mmc/host/sdricoh_cs.c

@@ -82,6 +82,8 @@ static struct pcmcia_device_id pcmcia_ids[] = {
 	/* vendor and device strings followed by their crc32 hashes */
 	PCMCIA_DEVICE_PROD_ID12("RICOH", "Bay1Controller", 0xd9f522ed,
 				0xc3901202),
+	PCMCIA_DEVICE_PROD_ID12("RICOH", "Bay Controller", 0xd9f522ed,
+				0xace80909),
 	PCMCIA_DEVICE_NULL,
 };
 
@@ -463,7 +465,7 @@ static int sdricoh_init_mmc(struct pci_dev *pci_dev,
 
 err:
 	if (iobase)
-		iounmap(iobase);
+		pci_iounmap(pci_dev, iobase);
 	if (mmc)
 		mmc_free_host(mmc);
 

drivers/mmc/host/tmio_mmc.c

@@ -224,7 +224,7 @@ static inline void tmio_mmc_data_irq(struct tmio_mmc_host *host)
 {
 	void __iomem *ctl = host->ctl;
 	struct mmc_data *data = host->data;
-	struct mmc_command *stop = data->stop;
+	struct mmc_command *stop;
 
 	host->data = NULL;
 
@@ -232,6 +232,7 @@ static inline void tmio_mmc_data_irq(struct tmio_mmc_host *host)
 		pr_debug("Spurious data end IRQ\n");
 		return;
 	}
+	stop = data->stop;
 
 	/* FIXME - return correct transfer count on errors */
 	if (!data->error)

include/linux/mmc/core.h

@@ -151,4 +151,6 @@ static inline void mmc_claim_host(struct mmc_host *host)
 	__mmc_claim_host(host, NULL);
 }
 
+extern u32 mmc_vddrange_to_ocrmask(int vdd_min, int vdd_max);
+
 #endif

include/linux/mmc/host.h

@@ -41,6 +41,7 @@ struct mmc_ios {
 
 #define MMC_BUS_WIDTH_1		0
 #define MMC_BUS_WIDTH_4		2
+#define MMC_BUS_WIDTH_8		3
 
 	unsigned char	timing;			/* timing specification used */
 
@@ -116,6 +117,7 @@ struct mmc_host {
 #define MMC_CAP_SDIO_IRQ	(1 << 3)	/* Can signal pending SDIO IRQs */
 #define MMC_CAP_SPI		(1 << 4)	/* Talks only SPI protocols */
 #define MMC_CAP_NEEDS_POLL	(1 << 5)	/* Needs polling for card-detection */
+#define MMC_CAP_8_BIT_DATA	(1 << 6)	/* Can the host do 8 bit transfers */
 
 	/* host specific block data */
 	unsigned int		max_seg_size;	/* see blk_queue_max_segment_size */

include/linux/spi/mmc_spi.h

 #ifndef __LINUX_SPI_MMC_SPI_H
 #define __LINUX_SPI_MMC_SPI_H
 
+#include <linux/device.h>
+#include <linux/spi/spi.h>
 #include <linux/interrupt.h>
 
-struct device;
 struct mmc_host;
 
 /* Put this in platform_data of a device being used to manage an MMC/SD
@@ -41,4 +42,16 @@ struct mmc_spi_platform_data {
 	void (*setpower)(struct device *, unsigned int maskval);
 };
 
+#ifdef CONFIG_OF
+extern struct mmc_spi_platform_data *mmc_spi_get_pdata(struct spi_device *spi);
+extern void mmc_spi_put_pdata(struct spi_device *spi);
+#else
+static inline struct mmc_spi_platform_data *
+mmc_spi_get_pdata(struct spi_device *spi)
+{
+	return spi->dev.platform_data;
+}
+static inline void mmc_spi_put_pdata(struct spi_device *spi) {}
+#endif /* CONFIG_OF */
+
 #endif /* __LINUX_SPI_MMC_SPI_H */