hwrng: bcm2835 - fix oops when rng h/w is accessed during registration

Commit "d9e79726 hwrng: add randomness to system from rng sources"
exposed a bug in the bcm2835-rng driver resulting in boot failure
on Raspberry Pi due to the following oops:

[   28.261523] BUG: soft lockup - CPU#0 stuck for 23s! [swapper:1]
[   28.271058]
[   28.275958] CPU: 0 PID: 1 Comm: swapper Not tainted 3.14.0+ #11
[   28.285374] task: db480000 ti: db484000 task.ti: db484000
[   28.294279] PC is at bcm2835_rng_read+0x28/0x48
[   28.302276] LR is at hwrng_register+0x1a8/0x238
.
.
.

The RNG h/w is not completely initialized and enabled before
hwrng_register() is called and so the bcm2835_rng_read() fails.
Fix this by making the warmup/enable writes before registering
the RNG source with the hwrng core.
Signed-off-by: Matt Porter <mporter@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

drivers/char/hw_random/bcm2835-rng.c

@@ -61,18 +61,18 @@ static int bcm2835_rng_probe(struct platform_device *pdev)
 	}
 	bcm2835_rng_ops.priv = (unsigned long)rng_base;
 
+	/* set warm-up count & enable */
+	__raw_writel(RNG_WARMUP_COUNT, rng_base + RNG_STATUS);
+	__raw_writel(RNG_RBGEN, rng_base + RNG_CTRL);
+
 	/* register driver */
 	err = hwrng_register(&bcm2835_rng_ops);
 	if (err) {
 		dev_err(dev, "hwrng registration failed\n");
 		iounmap(rng_base);
-	} else {
+	} else
 		dev_info(dev, "hwrng registered\n");
 
-		/* set warm-up count & enable */
-		__raw_writel(RNG_WARMUP_COUNT, rng_base + RNG_STATUS);
-		__raw_writel(RNG_RBGEN, rng_base + RNG_CTRL);
-	}
 	return err;
 }