Merge git://www.linux-watchdog.org/linux-watchdog

Pull watchdog fixes from Wim Van Sebroeck:
 - orion_wdt compile-test dependencies
 - sama5d4_wdt: WDDIS handling and a race confition
 - pcwd_usb: fix NULL-deref at probe
 - cadence_wdt: fix timeout setting
 - wdt_pci: fix build error if SOFTWARE_REBOOT is defined
 - iTCO_wdt: all versions count down twice
 - zx2967: remove redundant dev_err call in zx2967_wdt_probe()
 - bcm281xx: Fix use of uninitialized spinlock

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: bcm281xx: Fix use of uninitialized spinlock.
  watchdog: zx2967: remove redundant dev_err call in zx2967_wdt_probe()
  iTCO_wdt: all versions count down twice
  watchdog: wdt_pci: fix build error if define SOFTWARE_REBOOT
  watchdog: cadence_wdt: fix timeout setting
  watchdog: pcwd_usb: fix NULL-deref at probe
  watchdog: sama5d4: fix race condition
  watchdog: sama5d4: fix WDDIS handling
  watchdog: orion: fix compile-test dependencies

Documentation/watchdog/watchdog-parameters.txt

@@ -117,7 +117,7 @@ nowayout: Watchdog cannot be stopped once started
 -------------------------------------------------
 iTCO_wdt:
 heartbeat: Watchdog heartbeat in seconds.
-	(2<heartbeat<39 (TCO v1) or 613 (TCO v2), default=30)
+	(5<=heartbeat<=74 (TCO v1) or 1226 (TCO v2), default=30)
 nowayout: Watchdog cannot be stopped once started
 	(default=kernel config parameter)
 -------------------------------------------------

drivers/watchdog/Kconfig

@@ -452,7 +452,7 @@ config DAVINCI_WATCHDOG
 
 config ORION_WATCHDOG
 	tristate "Orion watchdog"
-	depends on ARCH_ORION5X || ARCH_DOVE || MACH_DOVE || ARCH_MVEBU || COMPILE_TEST
+	depends on ARCH_ORION5X || ARCH_DOVE || MACH_DOVE || ARCH_MVEBU || (COMPILE_TEST && !ARCH_EBSA110)
 	depends on ARM
 	select WATCHDOG_CORE
 	help

drivers/watchdog/bcm_kona_wdt.c

@@ -304,6 +304,8 @@ static int bcm_kona_wdt_probe(struct platform_device *pdev)
 	if (!wdt)
 		return -ENOMEM;
 
+	spin_lock_init(&wdt->lock);
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	wdt->base = devm_ioremap_resource(dev, res);
 	if (IS_ERR(wdt->base))
@@ -316,7 +318,6 @@ static int bcm_kona_wdt_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	spin_lock_init(&wdt->lock);
 	platform_set_drvdata(pdev, wdt);
 	watchdog_set_drvdata(&bcm_kona_wdt_wdd, wdt);
 	bcm_kona_wdt_wdd.parent = &pdev->dev;

drivers/watchdog/cadence_wdt.c

@@ -49,7 +49,7 @@
 /* Counter maximum value */
 #define CDNS_WDT_COUNTER_MAX 0xFFF
 
-static int wdt_timeout = CDNS_WDT_DEFAULT_TIMEOUT;
+static int wdt_timeout;
 static int nowayout = WATCHDOG_NOWAYOUT;
 
 module_param(wdt_timeout, int, 0);

drivers/watchdog/iTCO_wdt.c

@@ -306,16 +306,15 @@ static int iTCO_wdt_ping(struct watchdog_device *wd_dev)
 
 	iTCO_vendor_pre_keepalive(p->smi_res, wd_dev->timeout);
 
-	/* Reload the timer by writing to the TCO Timer Counter register */
-	if (p->iTCO_version >= 2) {
-		outw(0x01, TCO_RLD(p));
-	} else if (p->iTCO_version == 1) {
 	/* Reset the timeout status bit so that the timer
 	 * needs to count down twice again before rebooting */
 	outw(0x0008, TCO1_STS(p));	/* write 1 to clear bit */
 
+	/* Reload the timer by writing to the TCO Timer Counter register */
+	if (p->iTCO_version >= 2)
+		outw(0x01, TCO_RLD(p));
+	else if (p->iTCO_version == 1)
 		outb(0x01, TCO_RLD(p));
-	}
 
 	spin_unlock(&p->io_lock);
 	return 0;
@@ -328,11 +327,8 @@ static int iTCO_wdt_set_timeout(struct watchdog_device *wd_dev, unsigned int t)
 	unsigned char val8;
 	unsigned int tmrval;
 
-	tmrval = seconds_to_ticks(p, t);
-
-	/* For TCO v1 the timer counts down twice before rebooting */
-	if (p->iTCO_version == 1)
-		tmrval /= 2;
+	/* The timer counts down twice before rebooting */
+	tmrval = seconds_to_ticks(p, t) / 2;
 
 	/* from the specs: */
 	/* "Values of 0h-3h are ignored and should not be attempted" */
@@ -385,6 +381,8 @@ static unsigned int iTCO_wdt_get_timeleft(struct watchdog_device *wd_dev)
 		spin_lock(&p->io_lock);
 		val16 = inw(TCO_RLD(p));
 		val16 &= 0x3ff;
+		if (!(inw(TCO1_STS(p)) & 0x0008))
+			val16 += (inw(TCOv2_TMR(p)) & 0x3ff);
 		spin_unlock(&p->io_lock);
 
 		time_left = ticks_to_seconds(p, val16);

drivers/watchdog/pcwd_usb.c

@@ -630,6 +630,9 @@ static int usb_pcwd_probe(struct usb_interface *interface,
 		return -ENODEV;
 	}
 
+	if (iface_desc->desc.bNumEndpoints < 1)
+		return -ENODEV;
+
 	/* check out the endpoint: it has to be Interrupt & IN */
 	endpoint = &iface_desc->endpoint[0].desc;
 

drivers/watchdog/sama5d4_wdt.c

@@ -6,6 +6,7 @@
  * Licensed under GPLv2.
  */
 
+#include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
@@ -29,6 +30,7 @@ struct sama5d4_wdt {
 	struct watchdog_device	wdd;
 	void __iomem		*reg_base;
 	u32			mr;
+	unsigned long		last_ping;
 };
 
 static int wdt_timeout = WDT_DEFAULT_TIMEOUT;
@@ -44,11 +46,34 @@ MODULE_PARM_DESC(nowayout,
 	"Watchdog cannot be stopped once started (default="
 	__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
+#define wdt_enabled (!(wdt->mr & AT91_WDT_WDDIS))
+
 #define wdt_read(wdt, field) \
 	readl_relaxed((wdt)->reg_base + (field))
 
-#define wdt_write(wtd, field, val) \
-	writel_relaxed((val), (wdt)->reg_base + (field))
+/* 4 slow clock periods is 4/32768 = 122.07µs*/
+#define WDT_DELAY	usecs_to_jiffies(123)
+
+static void wdt_write(struct sama5d4_wdt *wdt, u32 field, u32 val)
+{
+	/*
+	 * WDT_CR and WDT_MR must not be modified within three slow clock
+	 * periods following a restart of the watchdog performed by a write
+	 * access in WDT_CR.
+	 */
+	while (time_before(jiffies, wdt->last_ping + WDT_DELAY))
+		usleep_range(30, 125);
+	writel_relaxed(val, wdt->reg_base + field);
+	wdt->last_ping = jiffies;
+}
+
+static void wdt_write_nosleep(struct sama5d4_wdt *wdt, u32 field, u32 val)
+{
+	if (time_before(jiffies, wdt->last_ping + WDT_DELAY))
+		udelay(123);
+	writel_relaxed(val, wdt->reg_base + field);
+	wdt->last_ping = jiffies;
+}
 
 static int sama5d4_wdt_start(struct watchdog_device *wdd)
 {
@@ -89,7 +114,16 @@ static int sama5d4_wdt_set_timeout(struct watchdog_device *wdd,
 	wdt->mr &= ~AT91_WDT_WDD;
 	wdt->mr |= AT91_WDT_SET_WDV(value);
 	wdt->mr |= AT91_WDT_SET_WDD(value);
-	wdt_write(wdt, AT91_WDT_MR, wdt->mr);
+
+	/*
+	 * WDDIS has to be 0 when updating WDD/WDV. The datasheet states: When
+	 * setting the WDDIS bit, and while it is set, the fields WDV and WDD
+	 * must not be modified.
+	 * If the watchdog is enabled, then the timeout can be updated. Else,
+	 * wait that the user enables it.
+	 */
+	if (wdt_enabled)
+		wdt_write(wdt, AT91_WDT_MR, wdt->mr & ~AT91_WDT_WDDIS);
 
 	wdd->timeout = timeout;
 
@@ -145,23 +179,21 @@ static int of_sama5d4_wdt_init(struct device_node *np, struct sama5d4_wdt *wdt)
 
 static int sama5d4_wdt_init(struct sama5d4_wdt *wdt)
 {
-	struct watchdog_device *wdd = &wdt->wdd;
-	u32 value = WDT_SEC2TICKS(wdd->timeout);
 	u32 reg;
-
 	/*
-	 * Because the fields WDV and WDD must not be modified when the WDDIS
-	 * bit is set, so clear the WDDIS bit before writing the WDT_MR.
+	 * When booting and resuming, the bootloader may have changed the
+	 * watchdog configuration.
+	 * If the watchdog is already running, we can safely update it.
+	 * Else, we have to disable it properly.
 	 */
+	if (wdt_enabled) {
+		wdt_write_nosleep(wdt, AT91_WDT_MR, wdt->mr);
+	} else {
 		reg = wdt_read(wdt, AT91_WDT_MR);
-	reg &= ~AT91_WDT_WDDIS;
-	wdt_write(wdt, AT91_WDT_MR, reg);
-
-	wdt->mr |= AT91_WDT_SET_WDD(value);
-	wdt->mr |= AT91_WDT_SET_WDV(value);
-
-	wdt_write(wdt, AT91_WDT_MR, wdt->mr);
-
+		if (!(reg & AT91_WDT_WDDIS))
+			wdt_write_nosleep(wdt, AT91_WDT_MR,
+					  reg | AT91_WDT_WDDIS);
+	}
 	return 0;
 }
 
@@ -172,6 +204,7 @@ static int sama5d4_wdt_probe(struct platform_device *pdev)
 	struct resource *res;
 	void __iomem *regs;
 	u32 irq = 0;
+	u32 timeout;
 	int ret;
 
 	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
@@ -184,6 +217,7 @@ static int sama5d4_wdt_probe(struct platform_device *pdev)
 	wdd->ops = &sama5d4_wdt_ops;
 	wdd->min_timeout = MIN_WDT_TIMEOUT;
 	wdd->max_timeout = MAX_WDT_TIMEOUT;
+	wdt->last_ping = jiffies;
 
 	watchdog_set_drvdata(wdd, wdt);
 
@@ -221,6 +255,11 @@ static int sama5d4_wdt_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	timeout = WDT_SEC2TICKS(wdd->timeout);
+
+	wdt->mr |= AT91_WDT_SET_WDD(timeout);
+	wdt->mr |= AT91_WDT_SET_WDV(timeout);
+
 	ret = sama5d4_wdt_init(wdt);
 	if (ret)
 		return ret;
@@ -263,9 +302,7 @@ static int sama5d4_wdt_resume(struct device *dev)
 {
 	struct sama5d4_wdt *wdt = dev_get_drvdata(dev);
 
-	wdt_write(wdt, AT91_WDT_MR, wdt->mr & ~AT91_WDT_WDDIS);
-	if (wdt->mr & AT91_WDT_WDDIS)
-		wdt_write(wdt, AT91_WDT_MR, wdt->mr);
+	sama5d4_wdt_init(wdt);
 
 	return 0;
 }

drivers/watchdog/wdt_pci.c

@@ -332,7 +332,7 @@ static irqreturn_t wdtpci_interrupt(int irq, void *dev_id)
 		pr_crit("Would Reboot\n");
 #else
 		pr_crit("Initiating system reboot\n");
-		emergency_restart(NULL);
+		emergency_restart();
 #endif
 #else
 		pr_crit("Reset in 5ms\n");

drivers/watchdog/zx2967_wdt.c

@@ -211,10 +211,8 @@ static int zx2967_wdt_probe(struct platform_device *pdev)
 
 	base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	wdt->reg_base = devm_ioremap_resource(dev, base);
-	if (IS_ERR(wdt->reg_base)) {
-		dev_err(dev, "ioremap failed\n");
+	if (IS_ERR(wdt->reg_base))
 		return PTR_ERR(wdt->reg_base);
-	}
 
 	zx2967_wdt_reset_sysctrl(dev);