Commit ec89ab50 authored by Steve Capper's avatar Steve Capper Committed by Catalin Marinas

arm64: Fix TTBR + PAN + 52-bit PA logic in cpu_do_switch_mm

In cpu_do_switch_mm(.) with ARM64_SW_TTBR0_PAN=y we apply phys_to_ttbr
to a value that already has an ASID inserted into the upper bits. For
52-bit PA configurations this then can give us TTBR0_EL1 registers that
cause translation table walks to attempt to access non-zero PA[51:48]
spuriously. Ultimately leading to a Synchronous External Abort on level
1 translation.

This patch re-arranges the logic in cpu_do_switch_mm(.) such that
phys_to_ttbr is called before the ASID is inserted into the TTBR0 value.

Fixes: 6b88a32c ("arm64: kpti: Fix the interaction between ASID switching and software PAN")
Acked-by: default avatarSuzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: default avatarKristina Martsenko <kristina.martsenko@arm.com>
Reviewed-by: default avatarKristina Martsenko <kristina.martsenko@arm.com>
Signed-off-by: default avatarSteve Capper <steve.capper@arm.com>
Signed-off-by: default avatarCatalin Marinas <catalin.marinas@arm.com>
parent 0ba2e29c
...@@ -153,14 +153,14 @@ ENDPROC(cpu_do_resume) ...@@ -153,14 +153,14 @@ ENDPROC(cpu_do_resume)
ENTRY(cpu_do_switch_mm) ENTRY(cpu_do_switch_mm)
mrs x2, ttbr1_el1 mrs x2, ttbr1_el1
mmid x1, x1 // get mm->context.id mmid x1, x1 // get mm->context.id
phys_to_ttbr x0, x3
#ifdef CONFIG_ARM64_SW_TTBR0_PAN #ifdef CONFIG_ARM64_SW_TTBR0_PAN
bfi x0, x1, #48, #16 // set the ASID field in TTBR0 bfi x3, x1, #48, #16 // set the ASID field in TTBR0
#endif #endif
bfi x2, x1, #48, #16 // set the ASID bfi x2, x1, #48, #16 // set the ASID
msr ttbr1_el1, x2 // in TTBR1 (since TCR.A1 is set) msr ttbr1_el1, x2 // in TTBR1 (since TCR.A1 is set)
isb isb
phys_to_ttbr x0, x2 msr ttbr0_el1, x3 // now update TTBR0
msr ttbr0_el1, x2 // now update TTBR0
isb isb
b post_ttbr_update_workaround // Back to C code... b post_ttbr_update_workaround // Back to C code...
ENDPROC(cpu_do_switch_mm) ENDPROC(cpu_do_switch_mm)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment