Skip to content

L
linux
Commit ecaedfa3 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh64-2.6 

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh64-2.6:
  sh64: mach-cayman: Build fixes.
  sh64: Symbol export fixups.
  sh64: linker script tidying and alignment fixups.
  sh64: Set KBUILD_IMAGE to make the rpm target happy.
  sh64: Kill off obsolete linux/blk.h reference.
  sh64: cleanup struct irqaction initializers.
  sh64: Kill off dead gdb stub symbol.
  sh64: alphanumeric display only on Cayman.
  sh64: Add defconfigs for mach-sim and mach-harp.
  sh64: update cayman defconfig.
  sh64: Tidy up Kconfig dependencies.
  sh64: Move consistent DMA routines to arch/sh64/mm/.
  sh64: Some symbol exports and build fixes.
  sh64: mach-sim: Build fixes.
  sh64: mach-harp: Build fixes.
  sh64: Kill off duplicate frame pointer option.
  sh64: Kill off dead ROM-RAM and generic boards.
  sh64: Tidy up includes for Cayman board.
  sh64: Move *_p() I/O routine variants to io.h.
parents dcf397f0 cb0f3fe0
Show whitespace changes
Inline Side-by-side
Showing with 1641 additions and 455 deletions
arch/sh64/Kconfig
View file @ ecaedfa3
......@@ -36,6 +36,14 @@ config GENERIC_CALIBRATE_DELAY
bool
default y
config GENERIC_HARDIRQS
bool
default y
config GENERIC_IRQ_PROBE
bool
default y
config RWSEM_XCHGADD_ALGORITHM
bool
......@@ -58,18 +66,12 @@ choice
prompt "SuperH system type"
default SH_SIMULATOR
config SH_GENERIC
bool "Generic"
config SH_SIMULATOR
bool "Simulator"
config SH_CAYMAN
bool "Cayman"
config SH_ROMRAM
bool "ROM/RAM"
config SH_HARP
bool "ST50-Harp"
......@@ -152,60 +154,54 @@ comment "Memory options"
config CACHED_MEMORY_OFFSET
hex "Cached Area Offset"
depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
default "20000000"
config MEMORY_START
hex "Physical memory start address"
depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
default "80000000"
config MEMORY_SIZE_IN_MB
int "Memory size (in MB)" if SH_HARP || SH_CAYMAN || SH_SIMULATOR
default "64" if SH_HARP || SH_CAYMAN
int "Memory size (in MB)"
default "8" if SH_SIMULATOR
default "64"
comment "Cache options"
config DCACHE_DISABLED
bool "DCache Disabling"
depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
choice
prompt "DCache mode"
depends on !DCACHE_DISABLED && !SH_SIMULATOR
default DCACHE_DISABLED if SH_SIMULATOR
default DCACHE_WRITE_BACK
config DCACHE_WRITE_BACK
bool "Write-back"
depends on !SH_SIMULATOR
config DCACHE_WRITE_THROUGH
bool "Write-through"
depends on !SH_SIMULATOR
config DCACHE_DISABLED
bool "Disabled"
endchoice
config ICACHE_DISABLED
bool "ICache Disabling"
depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
config PCIDEVICE_MEMORY_START
hex
depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
default "C0000000"
config DEVICE_MEMORY_START
hex
depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
default "E0000000"
config FLASH_MEMORY_START
hex "Flash memory/on-chip devices start address"
depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
default "00000000"
config PCI_BLOCK_START
hex "PCI block start address"
depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
default "40000000"
comment "CPU Subtype specific options"
......@@ -214,8 +210,10 @@ config SH64_ID2815_WORKAROUND
bool "Include workaround for SH5-101 cut2 silicon defect ID2815"
comment "Misc options"
config HEARTBEAT
bool "Heartbeat LED"
depends on SH_CAYMAN
config HDSP253_LED
bool "Support for HDSP-253 LED"
......@@ -242,6 +240,7 @@ config SBUS
config PCI
bool "PCI support"
depends on SH_CAYMAN
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
......@@ -294,15 +293,3 @@ source "security/Kconfig"
source "crypto/Kconfig"
source "lib/Kconfig"
#
# Use the generic interrupt handling code in kernel/irq/:
#
config GENERIC_HARDIRQS
bool
default y
config GENERIC_IRQ_PROBE
bool
default y
arch/sh64/Kconfig.debug
View file @ ecaedfa3
......@@ -5,9 +5,6 @@ source "lib/Kconfig.debug"
config EARLY_PRINTK
bool "Early SCIF console support"
config DEBUG_KERNEL_WITH_GDB_STUB
bool "GDB Stub kernel debug"
config SH64_PROC_TLB
bool "Debug: report TLB fill/purge activity through /proc/tlb"
depends on PROC_FS
......@@ -28,17 +25,9 @@ config POOR_MANS_STRACE
config SH_ALPHANUMERIC
bool "Enable debug outputs to on-board alphanumeric display"
depends on SH_CAYMAN
config SH_NO_BSS_INIT
bool "Avoid zeroing BSS (to speed-up startup on suitable platforms)"
config FRAME_POINTER
bool "Compile the kernel with frame pointers"
default y if KGDB
help
If you say Y here the resulting kernel image will be slightly larger
and slower, but it will give very useful debugging information.
If you don't debug the kernel, you can say N, but we may not be able
to solve problems without frame pointers.
endmenu
arch/sh64/Makefile
View file @ ecaedfa3
......@@ -40,6 +40,8 @@ OBJCOPYFLAGS := -O binary -R .note -R .comment -R .stab -R .stabstr -S
#
KBUILD_DEFCONFIG := cayman_defconfig
KBUILD_IMAGE := arch/$(ARCH)/boot/zImage
ifdef LOADADDR
LINKFLAGS += -Ttext $(word 1,$(LOADADDR))
endif
......@@ -47,7 +49,6 @@ endif
machine-$(CONFIG_SH_CAYMAN) := cayman
machine-$(CONFIG_SH_SIMULATOR) := sim
machine-$(CONFIG_SH_HARP) := harp
machine-$(CONFIG_SH_ROMRAM) := romram
head-y := arch/$(ARCH)/kernel/head.o arch/$(ARCH)/kernel/init_task.o
......@@ -106,6 +107,5 @@ arch/$(ARCH)/lib/syscalltab.h: arch/sh64/kernel/syscalls.S
CLEAN_FILES += arch/$(ARCH)/lib/syscalltab.h
define archhelp
@echo ' zImage - Compressed kernel image (arch/sh64/boot/zImage)'
@echo '* zImage - Compressed kernel image'
endef
arch/sh64/configs/cayman_defconfig
View file @ ecaedfa3
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.22
# Fri Jul 20 12:28:34 2007
# Linux kernel version: 2.6.23-rc8
# Tue Oct 9 15:37:16 2007
#
CONFIG_SUPERH=y
CONFIG_SUPERH64=y
......@@ -11,21 +11,20 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
......@@ -57,7 +56,6 @@ CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
......@@ -67,7 +65,12 @@ CONFIG_SLAB=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
......@@ -90,10 +93,8 @@ CONFIG_DEFAULT_IOSCHED="cfq"
#
# System type
#
# CONFIG_SH_GENERIC is not set
# CONFIG_SH_SIMULATOR is not set
CONFIG_SH_CAYMAN=y
# CONFIG_SH_ROMRAM is not set
# CONFIG_SH_HARP is not set
CONFIG_CPU_SH5=y
CONFIG_CPU_SUBTYPE_SH5_101=y
......@@ -119,9 +120,9 @@ CONFIG_MEMORY_SIZE_IN_MB=128
#
# Cache options
#
# CONFIG_DCACHE_DISABLED is not set
CONFIG_DCACHE_WRITE_BACK=y
# CONFIG_DCACHE_WRITE_THROUGH is not set
# CONFIG_DCACHE_DISABLED is not set
# CONFIG_ICACHE_DISABLED is not set
CONFIG_PCIDEVICE_MEMORY_START=C0000000
CONFIG_DEVICE_MEMORY_START=E0000000
......@@ -151,7 +152,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=1
CONFIG_VIRT_TO_BUS=y
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
......@@ -276,7 +276,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
......@@ -325,6 +324,7 @@ CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
......@@ -332,12 +332,8 @@ CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
#
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
......@@ -347,7 +343,6 @@ CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
......@@ -449,6 +444,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
......@@ -572,7 +568,6 @@ CONFIG_WATCHDOG=y
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_SH_WDT is not set
#
# PCI-based Watchdog Cards
......@@ -586,7 +581,59 @@ CONFIG_HW_RANDOM=y
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
#
# I2C Algorithms
#
# CONFIG_I2C_ALGOBIT is not set
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
......@@ -599,16 +646,51 @@ CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
......@@ -621,8 +703,115 @@ CONFIG_HWMON=y
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_DEV=m
# CONFIG_VIDEO_V4L1 is not set
# CONFIG_VIDEO_V4L1_COMPAT is not set
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_TEA5761 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_RADIO_ADAPTERS is not set
CONFIG_DVB_CORE=y
# CONFIG_DVB_CORE_ATTACH is not set
CONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported SAA7146 based PCI Adapters
#
#
# Supported FlexCopII (B2C2) Adapters
#
# CONFIG_DVB_B2C2_FLEXCOP is not set
#
# Supported BT878 Adapters
#
#
# Supported Pluto2 Adapters
#
# CONFIG_DVB_PLUTO2 is not set
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_MT312 is not set
# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_S5H1420 is not set
# CONFIG_DVB_TDA10086 is not set
#
# DVB-T (terrestrial) frontends
#
# CONFIG_DVB_SP8870 is not set
# CONFIG_DVB_SP887X is not set
# CONFIG_DVB_CX22700 is not set
# CONFIG_DVB_CX22702 is not set
# CONFIG_DVB_L64781 is not set
# CONFIG_DVB_TDA1004X is not set
# CONFIG_DVB_NXT6000 is not set
# CONFIG_DVB_MT352 is not set
# CONFIG_DVB_ZL10353 is not set
# CONFIG_DVB_DIB3000MB is not set
# CONFIG_DVB_DIB3000MC is not set
# CONFIG_DVB_DIB7000M is not set
# CONFIG_DVB_DIB7000P is not set
#
# DVB-C (cable) frontends
#
# CONFIG_DVB_VES1820 is not set
# CONFIG_DVB_TDA10021 is not set
# CONFIG_DVB_TDA10023 is not set
# CONFIG_DVB_STV0297 is not set
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
# CONFIG_DVB_NXT200X is not set
# CONFIG_DVB_OR51211 is not set
# CONFIG_DVB_OR51132 is not set
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
#
# Tuners/PLL support
#
# CONFIG_DVB_PLL is not set
# CONFIG_DVB_TDA826X is not set
# CONFIG_DVB_TDA827X is not set
# CONFIG_DVB_TUNER_QT1010 is not set
# CONFIG_DVB_TUNER_MT2060 is not set
#
# Miscellaneous devices
#
# CONFIG_DVB_LNBP21 is not set
# CONFIG_DVB_ISL6421 is not set
# CONFIG_DVB_TUA6100 is not set
CONFIG_DAB=y
#
......@@ -635,6 +824,7 @@ CONFIG_DAB=y
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
......@@ -728,24 +918,8 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
# CONFIG_INFINIBAND is not set
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
......@@ -929,9 +1103,9 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_EARLY_PRINTK is not set
# CONFIG_DEBUG_KERNEL_WITH_GDB_STUB is not set
CONFIG_SH64_PROC_TLB=y
CONFIG_SH64_PROC_ASIDS=y
CONFIG_SH64_SR_WATCH=y
......@@ -960,5 +1134,3 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
arch/sh64/configs/harp_defconfig 0 → 100644
View file @ ecaedfa3
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.23-rc8
# Mon Oct 1 18:01:38 2007
#
CONFIG_SUPERH=y
CONFIG_SUPERH64=y
CONFIG_MMU=y
CONFIG_QUICKLIST=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# System type
#
# CONFIG_SH_SIMULATOR is not set
# CONFIG_SH_CAYMAN is not set
CONFIG_SH_HARP=y
CONFIG_CPU_SH5=y
CONFIG_CPU_SUBTYPE_SH5_101=y
# CONFIG_CPU_SUBTYPE_SH5_103 is not set
CONFIG_LITTLE_ENDIAN=y
# CONFIG_BIG_ENDIAN is not set
CONFIG_SH_FPU=y
# CONFIG_SH64_FPU_DENORM_FLUSH is not set
CONFIG_SH64_PGTABLE_2_LEVEL=y
# CONFIG_SH64_PGTABLE_3_LEVEL is not set
CONFIG_HUGETLB_PAGE_SIZE_64K=y
# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
CONFIG_SH64_USER_MISALIGNED_FIXUP=y
#
# Memory options
#
CONFIG_CACHED_MEMORY_OFFSET=0x20000000
CONFIG_MEMORY_START=0x80000000
CONFIG_MEMORY_SIZE_IN_MB=128
#
# Cache options
#
CONFIG_DCACHE_WRITE_BACK=y
# CONFIG_DCACHE_WRITE_THROUGH is not set
# CONFIG_DCACHE_DISABLED is not set
# CONFIG_ICACHE_DISABLED is not set
CONFIG_PCIDEVICE_MEMORY_START=C0000000
CONFIG_DEVICE_MEMORY_START=E0000000
CONFIG_FLASH_MEMORY_START=0x00000000
CONFIG_PCI_BLOCK_START=0x40000000
#
# CPU Subtype specific options
#
CONFIG_SH64_ID2815_WORKAROUND=y
#
# Misc options
#
# CONFIG_SH_DMA is not set
CONFIG_PREEMPT=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=1
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
# CONFIG_ARCH_SUPPORTS_MSI is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_STNIC is not set
# CONFIG_SMC91X is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=2
CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
CONFIG_DAB=y
#
# Graphics support
#
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
# CONFIG_LOGO_SUPERH_MONO is not set
# CONFIG_LOGO_SUPERH_VGA16 is not set
CONFIG_LOGO_SUPERH_CLUT224=y
#
# Sound
#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_MINIX_FS=y
CONFIG_ROMFS_FS=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
#
# Native Language Support
#
# CONFIG_NLS is not set
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_EARLY_PRINTK is not set
# CONFIG_DEBUG_KERNEL_WITH_GDB_STUB is not set
CONFIG_SH64_PROC_TLB=y
CONFIG_SH64_PROC_ASIDS=y
CONFIG_SH64_SR_WATCH=y
# CONFIG_POOR_MANS_STRACE is not set
# CONFIG_SH_ALPHANUMERIC is not set
# CONFIG_SH_NO_BSS_INIT is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_CRYPTO is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
arch/sh64/configs/sim_defconfig 0 → 100644
View file @ ecaedfa3
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.23-rc8
# Mon Oct 1 17:50:35 2007
#
CONFIG_SUPERH=y
CONFIG_SUPERH64=y
CONFIG_MMU=y
CONFIG_QUICKLIST=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_USER_NS is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# System type
#
CONFIG_SH_SIMULATOR=y
# CONFIG_SH_CAYMAN is not set
# CONFIG_SH_HARP is not set
CONFIG_CPU_SH5=y
CONFIG_CPU_SUBTYPE_SH5_101=y
# CONFIG_CPU_SUBTYPE_SH5_103 is not set
CONFIG_LITTLE_ENDIAN=y
# CONFIG_BIG_ENDIAN is not set
CONFIG_SH_FPU=y
# CONFIG_SH64_FPU_DENORM_FLUSH is not set
CONFIG_SH64_PGTABLE_2_LEVEL=y
# CONFIG_SH64_PGTABLE_3_LEVEL is not set
CONFIG_HUGETLB_PAGE_SIZE_64K=y
# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
CONFIG_SH64_USER_MISALIGNED_FIXUP=y
#
# Memory options
#
CONFIG_CACHED_MEMORY_OFFSET=0x20000000
CONFIG_MEMORY_START=0x80000000
CONFIG_MEMORY_SIZE_IN_MB=128
#
# Cache options
#
# CONFIG_DCACHE_WRITE_BACK is not set
# CONFIG_DCACHE_WRITE_THROUGH is not set
CONFIG_DCACHE_DISABLED=y
# CONFIG_ICACHE_DISABLED is not set
CONFIG_PCIDEVICE_MEMORY_START=C0000000
CONFIG_DEVICE_MEMORY_START=E0000000
CONFIG_FLASH_MEMORY_START=0x00000000
CONFIG_PCI_BLOCK_START=0x40000000
#
# CPU Subtype specific options
#
CONFIG_SH64_ID2815_WORKAROUND=y
#
# Misc options
#
# CONFIG_SH_DMA is not set
CONFIG_PREEMPT=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=1
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
# CONFIG_ARCH_SUPPORTS_MSI is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
#
# Networking
#
# CONFIG_NET is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=2
CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
CONFIG_DAB=y
#
# Graphics support
#
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
# CONFIG_LOGO_SUPERH_MONO is not set
# CONFIG_LOGO_SUPERH_VGA16 is not set
CONFIG_LOGO_SUPERH_CLUT224=y
#
# Sound
#
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
CONFIG_MINIX_FS=y
CONFIG_ROMFS_FS=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
#
# Native Language Support
#
# CONFIG_NLS is not set
#
# Profiling support
#
CONFIG_PROFILING=y
# CONFIG_OPROFILE is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_EARLY_PRINTK is not set
# CONFIG_DEBUG_KERNEL_WITH_GDB_STUB is not set
CONFIG_SH64_PROC_TLB=y
CONFIG_SH64_PROC_ASIDS=y
CONFIG_SH64_SR_WATCH=y
# CONFIG_POOR_MANS_STRACE is not set
# CONFIG_SH_ALPHANUMERIC is not set
CONFIG_SH_NO_BSS_INIT=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_CRYPTO is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
arch/sh64/kernel/Makefile
View file @ ecaedfa3
......@@ -25,7 +25,7 @@ obj-$(CONFIG_SH_DMA) += dma.o
obj-$(CONFIG_SH_FPU) += fpu.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_KALLSYMS) += unwind.o
obj-$(CONFIG_PCI) += pci-dma.o pcibios.o
obj-$(CONFIG_PCI) += pcibios.o
obj-$(CONFIG_MODULES) += module.o
ifeq ($(CONFIG_PCI),y)
......
arch/sh64/kernel/alphanum.c
View file @ ecaedfa3
......@@ -13,7 +13,6 @@
#include <linux/sched.h>
void mach_alphanum(int pos, unsigned char val);
void mach_led(int pos, int val);
void print_seg(char *file, int line)
{
......
arch/sh64/kernel/sh_ksyms.c
View file @ ecaedfa3
......@@ -31,16 +31,11 @@ extern int dump_fpu(struct pt_regs *, elf_fpregset_t *);
/* platform dependent support */
EXPORT_SYMBOL(dump_fpu);
EXPORT_SYMBOL(iounmap);
EXPORT_SYMBOL(enable_irq);
EXPORT_SYMBOL(disable_irq);
EXPORT_SYMBOL(kernel_thread);
/* Networking helper routines. */
EXPORT_SYMBOL(csum_partial_copy_nocheck);
EXPORT_SYMBOL(strstr);
#ifdef CONFIG_VT
EXPORT_SYMBOL(screen_info);
#endif
......@@ -50,27 +45,18 @@ EXPORT_SYMBOL(__down_trylock);
EXPORT_SYMBOL(__up);
EXPORT_SYMBOL(__put_user_asm_l);
EXPORT_SYMBOL(__get_user_asm_l);
EXPORT_SYMBOL(memcmp);
EXPORT_SYMBOL(__copy_user);
EXPORT_SYMBOL(memcpy);
EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(memscan);
EXPORT_SYMBOL(strchr);
EXPORT_SYMBOL(strlen);
EXPORT_SYMBOL(udelay);
EXPORT_SYMBOL(__udelay);
EXPORT_SYMBOL(ndelay);
EXPORT_SYMBOL(__ndelay);
EXPORT_SYMBOL(flush_dcache_page);
/* For ext3 */
EXPORT_SYMBOL(sh64_page_clear);
/* Ugh. These come in from libgcc.a at link time. */
#define DECLARE_EXPORT(name) extern void name(void);EXPORT_SYMBOL(name)
extern void __sdivsi3(void);
extern void __muldi3(void);
extern void __udivsi3(void);
extern char __div_table;
EXPORT_SYMBOL(__sdivsi3);
EXPORT_SYMBOL(__muldi3);
EXPORT_SYMBOL(__udivsi3);
EXPORT_SYMBOL(__div_table);
DECLARE_EXPORT(__sdivsi3);
DECLARE_EXPORT(__muldi3);
DECLARE_EXPORT(__udivsi3);
arch/sh64/kernel/time.c
View file @ ecaedfa3
......@@ -476,8 +476,18 @@ static irqreturn_t sh64_rtc_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction irq0 = { timer_interrupt, IRQF_DISABLED, CPU_MASK_NONE, "timer", NULL, NULL};
static struct irqaction irq1 = { sh64_rtc_interrupt, IRQF_DISABLED, CPU_MASK_NONE, "rtc", NULL, NULL};
static struct irqaction irq0 = {
.handler = timer_interrupt,
.flags = IRQF_DISABLED,
.mask = CPU_MASK_NONE,
.name = "timer",
};
static struct irqaction irq1 = {
.handler = sh64_rtc_interrupt,
.flags = IRQF_DISABLED,
.mask = CPU_MASK_NONE,
.name = "rtc",
};
void __init time_init(void)
{
......
arch/sh64/kernel/vmlinux.lds.S
View file @ ecaedfa3
......@@ -30,14 +30,6 @@
#define LOAD_OFFSET CONFIG_CACHED_MEMORY_OFFSET
#include <asm-generic/vmlinux.lds.h>
#ifdef NOTDEF
#ifdef CONFIG_LITTLE_ENDIAN
OUTPUT_FORMAT("elf32-sh64l-linux", "elf32-sh64l-linux", "elf32-sh64l-linux")
#else
OUTPUT_FORMAT("elf32-sh64", "elf32-sh64", "elf32-sh64")
#endif
#endif
OUTPUT_ARCH(sh:sh5)
#define C_PHYS(x) AT (ADDR(x) - LOAD_OFFSET)
......@@ -74,10 +66,12 @@ SECTIONS
__ex_table : C_PHYS(__ex_table) { *(__ex_table) }
__stop___ex_table = .;
RODATA
_etext = .; /* End of text section */
NOTES
RODATA
.data : C_PHYS(.data) { /* Data */
DATA_DATA
CONSTRUCTORS
......@@ -86,13 +80,9 @@ SECTIONS
. = ALIGN(PAGE_SIZE);
.data.page_aligned : C_PHYS(.data.page_aligned) { *(.data.page_aligned) }
. = ALIGN(PAGE_SIZE);
__per_cpu_start = .;
.data.percpu : C_PHYS(.data.percpu) {
*(.data.percpu)
*(.data.percpu.shared_aligned)
}
__per_cpu_end = . ;
PERCPU(PAGE_SIZE)
. = ALIGN(L1_CACHE_BYTES);
.data.cacheline_aligned : C_PHYS(.data.cacheline_aligned) { *(.data.cacheline_aligned) }
_edata = .; /* End of data section */
......@@ -145,38 +135,6 @@ SECTIONS
*(.exitcall.exit)
}
/* Stabs debugging sections. */
.stab 0 : C_PHYS(.stab) { *(.stab) }
.stabstr 0 : C_PHYS(.stabstr) { *(.stabstr) }
.stab.excl 0 : C_PHYS(.stab.excl) { *(.stab.excl) }
.stab.exclstr 0 : C_PHYS(.stab.exclstr) { *(.stab.exclstr) }
.stab.index 0 : C_PHYS(.stab.index) { *(.stab.index) }
.stab.indexstr 0 : C_PHYS(.stab.indexstr) { *(.stab.indexstr) }
.comment 0 : C_PHYS(.comment) { *(.comment) }
/* DWARF debug sections.
Symbols in the DWARF debugging section are relative to the beginning
of the section so we begin .debug at 0. */
/* DWARF 1 */
.debug 0 : C_PHYS(.debug) { *(.debug) }
.line 0 : C_PHYS(.line) { *(.line) }
/* GNU DWARF 1 extensions */
.debug_srcinfo 0 : C_PHYS(.debug_srcinfo) { *(.debug_srcinfo) }
.debug_sfnames 0 : C_PHYS(.debug_sfnames) { *(.debug_sfnames) }
/* DWARF 1.1 and DWARF 2 */
.debug_aranges 0 : C_PHYS(.debug_aranges) { *(.debug_aranges) }
.debug_pubnames 0 : C_PHYS(.debug_pubnames) { *(.debug_pubnames) }
/* DWARF 2 */
.debug_info 0 : C_PHYS(.debug_info) { *(.debug_info) }
.debug_abbrev 0 : C_PHYS(.debug_abbrev) { *(.debug_abbrev) }
.debug_line 0 : C_PHYS(.debug_line) { *(.debug_line) }
.debug_frame 0 : C_PHYS(.debug_frame) { *(.debug_frame) }
.debug_str 0 : C_PHYS(.debug_str) { *(.debug_str) }
.debug_loc 0 : C_PHYS(.debug_loc) { *(.debug_loc) }
.debug_macinfo 0 : C_PHYS(.debug_macinfo) { *(.debug_macinfo) }
/* SGI/MIPS DWARF 2 extensions */
.debug_weaknames 0 : C_PHYS(.debug_weaknames) { *(.debug_weaknames) }
.debug_funcnames 0 : C_PHYS(.debug_funcnames) { *(.debug_funcnames) }
.debug_typenames 0 : C_PHYS(.debug_typenames) { *(.debug_typenames) }
.debug_varnames 0 : C_PHYS(.debug_varnames) { *(.debug_varnames) }
/* These must appear regardless of . */
STABS_DEBUG
DWARF_DEBUG
}
arch/sh64/lib/c-checksum.c
View file @ ecaedfa3
......@@ -10,6 +10,7 @@
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <asm/byteorder.h>
#include <asm/uaccess.h>
......@@ -110,7 +111,7 @@ static unsigned long do_csum(const unsigned char *buff, int len)
if (odd)
result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
pr_debug("\nCHECKSUM is 0x%x\n", result);
pr_debug("\nCHECKSUM is 0x%lx\n", result);
out:
return result;
......
arch/sh64/lib/io.c
View file @ ecaedfa3
......@@ -11,30 +11,11 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <asm/system.h>
#include <asm/processor.h>
#include <asm/io.h>
/*
* readX/writeX() are used to access memory mapped devices. On some
* architectures the memory mapped IO stuff needs to be accessed
* differently. On the SuperH architecture, we just read/write the
* memory location directly.
*/
/* This is horrible at the moment - needs more work to do something sensible */
#define IO_DELAY()
#define OUT_DELAY(x,type) \
void out##x##_p(unsigned type value,unsigned long port){out##x(value,port);IO_DELAY();}
#define IN_DELAY(x,type) \
unsigned type in##x##_p(unsigned long port) {unsigned type tmp=in##x(port);IO_DELAY();return tmp;}
#if 1
OUT_DELAY(b, long) OUT_DELAY(w, long) OUT_DELAY(l, long)
IN_DELAY(b, long) IN_DELAY(w, long) IN_DELAY(l, long)
#endif
/* Now for the string version of these functions */
void outsb(unsigned long port, const void *addr, unsigned long count)
{
......@@ -45,6 +26,7 @@ void outsb(unsigned long port, const void *addr, unsigned long count)
outb(*p, port);
}
}
EXPORT_SYMBOL(outsb);
void insb(unsigned long port, void *addr, unsigned long count)
{
......@@ -55,6 +37,7 @@ void insb(unsigned long port, void *addr, unsigned long count)
*p = inb(port);
}
}
EXPORT_SYMBOL(insb);
/* For the 16 and 32 bit string functions, we have to worry about alignment.
* The SH does not do unaligned accesses, so we have to read as bytes and
......@@ -74,6 +57,7 @@ void outsw(unsigned long port, const void *addr, unsigned long count)
outw(tmp, port);
}
}
EXPORT_SYMBOL(outsw);
void insw(unsigned long port, void *addr, unsigned long count)
{
......@@ -87,6 +71,7 @@ void insw(unsigned long port, void *addr, unsigned long count)
p[1] = (tmp >> 8) & 0xff;
}
}
EXPORT_SYMBOL(insw);
void outsl(unsigned long port, const void *addr, unsigned long count)
{
......@@ -100,6 +85,7 @@ void outsl(unsigned long port, const void *addr, unsigned long count)
outl(tmp, port);
}
}
EXPORT_SYMBOL(outsl);
void insl(unsigned long port, void *addr, unsigned long count)
{
......@@ -116,6 +102,7 @@ void insl(unsigned long port, void *addr, unsigned long count)
}
}
EXPORT_SYMBOL(insl);
void memcpy_toio(void __iomem *to, const void *from, long count)
{
......@@ -126,6 +113,7 @@ void memcpy_toio(void __iomem *to, const void *from, long count)
writeb(*p++, to++);
}
}
EXPORT_SYMBOL(memcpy_toio);
void memcpy_fromio(void *to, void __iomem *from, long count)
{
......@@ -137,3 +125,4 @@ void memcpy_fromio(void *to, void __iomem *from, long count)
from++;
}
}
EXPORT_SYMBOL(memcpy_fromio);
arch/sh64/lib/iomap.c
View file @ ecaedfa3
......@@ -17,12 +17,15 @@ ioport_map(unsigned long port, unsigned int len)
{
return (void __iomem *)port;
}
EXPORT_SYMBOL(ioport_map);
void ioport_unmap(void __iomem *addr)
{
/* Nothing .. */
}
EXPORT_SYMBOL(ioport_unmap);
#ifdef CONFIG_PCI
void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max)
{
unsigned long start = pci_resource_start(dev, bar);
......@@ -41,14 +44,11 @@ void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max)
/* What? */
return NULL;
}
EXPORT_SYMBOL(pci_iomap);
void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
{
/* Nothing .. */
}
EXPORT_SYMBOL(ioport_map);
EXPORT_SYMBOL(ioport_unmap);
EXPORT_SYMBOL(pci_iomap);
EXPORT_SYMBOL(pci_iounmap);
#endif
arch/sh64/mach-cayman/setup.c
View file @ ecaedfa3
......@@ -18,19 +18,11 @@
* lethal@linux-sh.org: 15th May 2003
* Use the generic procfs cpuinfo interface, just return a valid board name.
*/
#include <linux/stddef.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/bootmem.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/seq_file.h>
#include <asm/processor.h>
#include <asm/platform.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/page.h>
#include <asm/io.h>
/*
* Platform Dependent Interrupt Priorities.
......
arch/sh64/mach-harp/Makefile
View file @ ecaedfa3
#
# Makefile for the ST50 Harp specific parts of the kernel
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
O_TARGET := harp.o
obj-y := setup.o
include $(TOPDIR)/Rules.make
arch/sh64/mach-harp/setup.c
View file @ ecaedfa3
......@@ -17,20 +17,10 @@
* lethal@linux-sh.org: 15th May 2003
* Use the generic procfs cpuinfo interface, just return a valid board name.
*/
#include <linux/stddef.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/bootmem.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <asm/processor.h>
#include <asm/platform.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/page.h>
#define RES_COUNT(res) ((sizeof((res))/sizeof(struct resource)))
/*
* Platform Dependent Interrupt Priorities.
......@@ -78,8 +68,10 @@ struct resource io_resources[] = {
};
struct resource kram_resources[] = {
{ "Kernel code", 0, 0 }, /* These must be last in the array */
{ "Kernel data", 0, 0 } /* These must be last in the array */
/* These must be last in the array */
{ .name = "Kernel code", .start = 0, .end = 0 },
/* These must be last in the array */
{ .name = "Kernel data", .start = 0, .end = 0 }
};
struct resource xram_resources[] = {
......@@ -95,13 +87,13 @@ struct sh64_platform platform_parms = {
.initial_root_dev = 0x0100,
.loader_type = 1,
.io_res_p = io_resources,
.io_res_count = RES_COUNT(io_resources),
.io_res_count = ARRAY_SIZE(io_resources),
.kram_res_p = kram_resources,
.kram_res_count = RES_COUNT(kram_resources),
.kram_res_count = ARRAY_SIZE(kram_resources),
.xram_res_p = xram_resources,
.xram_res_count = RES_COUNT(xram_resources),
.xram_res_count = ARRAY_SIZE(xram_resources),
.rom_res_p = rom_resources,
.rom_res_count = RES_COUNT(rom_resources),
.rom_res_count = ARRAY_SIZE(rom_resources),
};
int platform_int_priority[NR_INTC_IRQS] = {
......@@ -135,4 +127,3 @@ const char *get_system_type(void)
{
return "ST50 Harp";
}
arch/sh64/mach-romram/Makefile deleted 100644 → 0
View file @ dcf397f0
#
# Makefile for the SH-5 ROM/RAM specific parts of the kernel
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
O_TARGET := romram.o
obj-y := setup.o
include $(TOPDIR)/Rules.make
arch/sh64/mach-romram/setup.c deleted 100644 → 0
View file @ dcf397f0
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* arch/sh64/mach-romram/setup.c
*
* SH-5 ROM/RAM Platform Support
*
* This file handles the architecture-dependent parts of initialization
*
* Copyright (C) 2000, 2001 Paolo Alberelli
*
* benedict.gaster@superh.com: 3rd May 2002
* Added support for ramdisk, removing statically linked romfs at the same time. *
*
* lethal@linux-sh.org: 15th May 2003
* Use the generic procfs cpuinfo interface, just return a valid board name.
*
* Sean.McGoogan@superh.com 17th Feb 2004
* copied from arch/sh64/mach-harp/setup.c
*/
#include <linux/stddef.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/bootmem.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <asm/processor.h>
#include <asm/platform.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/page.h>
#define RES_COUNT(res) ((sizeof((res))/sizeof(struct resource)))
/*
* Platform Dependent Interrupt Priorities.
*/
/* Using defaults defined in irq.h */
#define RES NO_PRIORITY /* Disabled */
#define IR0 IRL0_PRIORITY /* IRLs */
#define IR1 IRL1_PRIORITY
#define IR2 IRL2_PRIORITY
#define IR3 IRL3_PRIORITY
#define PCA INTA_PRIORITY /* PCI Ints */
#define PCB INTB_PRIORITY
#define PCC INTC_PRIORITY
#define PCD INTD_PRIORITY
#define SER TOP_PRIORITY
#define ERR TOP_PRIORITY
#define PW0 TOP_PRIORITY
#define PW1 TOP_PRIORITY
#define PW2 TOP_PRIORITY
#define PW3 TOP_PRIORITY
#define DM0 NO_PRIORITY /* DMA Ints */
#define DM1 NO_PRIORITY
#define DM2 NO_PRIORITY
#define DM3 NO_PRIORITY
#define DAE NO_PRIORITY
#define TU0 TIMER_PRIORITY /* TMU Ints */
#define TU1 NO_PRIORITY
#define TU2 NO_PRIORITY
#define TI2 NO_PRIORITY
#define ATI NO_PRIORITY /* RTC Ints */
#define PRI NO_PRIORITY
#define CUI RTC_PRIORITY
#define ERI SCIF_PRIORITY /* SCIF Ints */
#define RXI SCIF_PRIORITY
#define BRI SCIF_PRIORITY
#define TXI SCIF_PRIORITY
#define ITI TOP_PRIORITY /* WDT Ints */
/*
* Platform dependent structures: maps and parms block.
*/
struct resource io_resources[] = {
/* To be updated with external devices */
};
struct resource kram_resources[] = {
{ "Kernel code", 0, 0 }, /* These must be last in the array */
{ "Kernel data", 0, 0 } /* These must be last in the array */
};
struct resource xram_resources[] = {
/* To be updated with external devices */
};
struct resource rom_resources[] = {
/* To be updated with external devices */
};
struct sh64_platform platform_parms = {
.readonly_rootfs = 1,
.initial_root_dev = 0x0100,
.loader_type = 1,
.io_res_p = io_resources,
.io_res_count = RES_COUNT(io_resources),
.kram_res_p = kram_resources,
.kram_res_count = RES_COUNT(kram_resources),
.xram_res_p = xram_resources,
.xram_res_count = RES_COUNT(xram_resources),
.rom_res_p = rom_resources,
.rom_res_count = RES_COUNT(rom_resources),
};
int platform_int_priority[NR_INTC_IRQS] = {
IR0, IR1, IR2, IR3, PCA, PCB, PCC, PCD, /* IRQ 0- 7 */
RES, RES, RES, RES, SER, ERR, PW3, PW2, /* IRQ 8-15 */
PW1, PW0, DM0, DM1, DM2, DM3, DAE, RES, /* IRQ 16-23 */
RES, RES, RES, RES, RES, RES, RES, RES, /* IRQ 24-31 */
TU0, TU1, TU2, TI2, ATI, PRI, CUI, ERI, /* IRQ 32-39 */
RXI, BRI, TXI, RES, RES, RES, RES, RES, /* IRQ 40-47 */
RES, RES, RES, RES, RES, RES, RES, RES, /* IRQ 48-55 */
RES, RES, RES, RES, RES, RES, RES, ITI, /* IRQ 56-63 */
};
void __init platform_setup(void)
{
/* ROM/RAM platform leaves the decision to head.S, for now */
platform_parms.fpu_flags = fpu_in_use;
}
void __init platform_monitor(void)
{
/* Nothing yet .. */
}
void __init platform_reserve(void)
{
/* Nothing yet .. */
}
const char *get_system_type(void)
{
return "ROM/RAM";
}
arch/sh64/mach-sim/Makefile
View file @ ecaedfa3
#
# Makefile for the SH-5 Simulator specific parts of the kernel
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
O_TARGET := sim.o
obj-y := setup.o
include $(TOPDIR)/Rules.make
arch/sh64/mach-sim/setup.c
View file @ ecaedfa3
......@@ -14,46 +14,10 @@
* lethal@linux-sh.org: 15th May 2003
* Use the generic procfs cpuinfo interface, just return a valid board name.
*/
#include <linux/stddef.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/bootmem.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <asm/addrspace.h>
#include <asm/processor.h>
#include <asm/platform.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/page.h>
#ifdef CONFIG_BLK_DEV_INITRD
#include "../rootfs/rootfs.h"
#endif
static __init void platform_monitor(void);
static __init void platform_setup(void);
static __init void platform_reserve(void);
#define PHYS_MEMORY CONFIG_MEMORY_SIZE_IN_MB*1024*1024
#if (PHYS_MEMORY < P1SEG_FOOTPRINT_RAM)
#error "Invalid kernel configuration. Physical memory below footprint requirements."
#endif
#define RAM_DISK_START CONFIG_MEMORY_START+P1SEG_INITRD_BLOCK /* Top of 4MB */
#ifdef PLATFORM_ROMFS_SIZE
#define RAM_DISK_SIZE (PAGE_ALIGN(PLATFORM_ROMFS_SIZE)) /* Variable Top */
#if ((RAM_DISK_START + RAM_DISK_SIZE) > (CONFIG_MEMORY_START + PHYS_MEMORY))
#error "Invalid kernel configuration. ROM RootFS exceeding physical memory."
#endif
#else
#define RAM_DISK_SIZE P1SEG_INITRD_BLOCK_SIZE /* Top of 4MB */
#endif
#define RES_COUNT(res) ((sizeof((res))/sizeof(struct resource)))
/*
* Platform Dependent Interrupt Priorities.
......@@ -101,8 +65,10 @@ struct resource io_resources[] = {
};
struct resource kram_resources[] = {
{ "Kernel code", 0, 0 }, /* These must be last in the array */
{ "Kernel data", 0, 0 } /* These must be last in the array */
/* These must be last in the array */
{ .name = "Kernel code", .start = 0, .end = 0 },
/* These must be last in the array */
{ .name = "Kernel data", .start = 0, .end = 0 }
};
struct resource xram_resources[] = {
......@@ -117,16 +83,14 @@ struct sh64_platform platform_parms = {
.readonly_rootfs = 1,
.initial_root_dev = 0x0100,
.loader_type = 1,
.initrd_start = RAM_DISK_START,
.initrd_size = RAM_DISK_SIZE,
.io_res_p = io_resources,
.io_res_count = RES_COUNT(io_resources),
.io_res_count = ARRAY_SIZE(io_resources),
.kram_res_p = kram_resources,
.kram_res_count = RES_COUNT(kram_resources),
.kram_res_count = ARRAY_SIZE(kram_resources),
.xram_res_p = xram_resources,
.xram_res_count = RES_COUNT(xram_resources),
.xram_res_count = ARRAY_SIZE(xram_resources),
.rom_res_p = rom_resources,
.rom_res_count = RES_COUNT(rom_resources),
.rom_res_count = ARRAY_SIZE(rom_resources),
};
int platform_int_priority[NR_IRQS] = {
......@@ -160,4 +124,3 @@ const char *get_system_type(void)
{
return "SH-5 Simulator";
}
arch/sh64/mm/Makefile
View file @ ecaedfa3
......@@ -13,7 +13,8 @@
# unless it's something special (ie not a .c file).
#
obj-y := init.o fault.o ioremap.o extable.o cache.o tlbmiss.o tlb.o
obj-y := cache.o consistent.o extable.o fault.o init.o ioremap.o \
tlbmiss.o tlb.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
......@@ -41,4 +42,3 @@ CFLAGS_tlbmiss.o += -ffixed-r7 \
-ffixed-r41 -ffixed-r42 -ffixed-r43 \
-ffixed-r60 -ffixed-r61 -ffixed-r62 \
-fomit-frame-pointer
arch/sh64/kernel/pci-dma.c → arch/sh64/mm/consistent.c
View file @ ecaedfa3
......@@ -11,6 +11,7 @@
#include <linux/mm.h>
#include <linux/string.h>
#include <linux/pci.h>
#include <linux/module.h>
#include <asm/io.h>
void *consistent_alloc(struct pci_dev *hwdev, size_t size,
......@@ -36,6 +37,7 @@ void *consistent_alloc(struct pci_dev *hwdev, size_t size,
return vp;
}
EXPORT_SYMBOL(consistent_alloc);
void consistent_free(struct pci_dev *hwdev, size_t size,
void *vaddr, dma_addr_t dma_handle)
......@@ -47,4 +49,4 @@ void consistent_free(struct pci_dev *hwdev, size_t size,
iounmap(vaddr);
}
EXPORT_SYMBOL(consistent_free);
arch/sh64/mm/init.c
View file @ ecaedfa3
......@@ -22,10 +22,6 @@
#include <asm/pgtable.h>
#include <asm/tlb.h>
#ifdef CONFIG_BLK_DEV_INITRD
#include <linux/blk.h>
#endif
DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
/*
......
arch/sh64/mm/ioremap.c
View file @ ecaedfa3
......@@ -19,11 +19,12 @@
#include <linux/sched.h>
#include <linux/string.h>
#include <linux/io.h>
#include <asm/pgalloc.h>
#include <asm/tlbflush.h>
#include <linux/ioport.h>
#include <linux/bootmem.h>
#include <linux/proc_fs.h>
#include <linux/module.h>
#include <asm/pgalloc.h>
#include <asm/tlbflush.h>
static void shmedia_mapioaddr(unsigned long, unsigned long);
static unsigned long shmedia_ioremap(struct resource *, u32, int);
......@@ -80,6 +81,7 @@ void * __ioremap(unsigned long phys_addr, unsigned long size, unsigned long flag
}
return (void *) (offset + (char *)addr);
}
EXPORT_SYMBOL(__ioremap);
void iounmap(void *addr)
{
......@@ -94,6 +96,7 @@ void iounmap(void *addr)
kfree(area);
}
EXPORT_SYMBOL(iounmap);
static struct resource shmedia_iomap = {
.name = "shmedia_iomap",
......
include/asm-sh64/io.h
View file @ ecaedfa3
......@@ -119,6 +119,13 @@ void insw(unsigned long port, void *addr, unsigned long count);
void outsl(unsigned long port, const void *addr, unsigned long count);
void insl(unsigned long port, void *addr, unsigned long count);
#define inb_p(addr) inb(addr)
#define inw_p(addr) inw(addr)
#define inl_p(addr) inl(addr)
#define outb_p(x,addr) outb(x,addr)
#define outw_p(x,addr) outw(x,addr)
#define outl_p(x,addr) outl(x,addr)
#define __raw_readb readb
#define __raw_readw readw
#define __raw_readl readl
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7