Merge branch 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6

* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  n_gsm: Fix length handling
  n_gsm: Copy n2 over when configuring via ioctl interface
  serial: bfin_5xx: grab port lock before making port termios changes
  serial: bfin_5xx: disable CON_PRINTBUFFER for consoles
  serial: bfin_5xx: remove redundant SSYNC to improve TX speed
  serial: bfin_5xx: always include DMA headers
  vcs: make proper usage of the poll flags
  amiserial: Remove unused variable icount
  8250: Fix tcsetattr to avoid ioctl(TIOCMIWAIT) hang
  tty_ldisc: Fix BUG() on hangup
  TTY: restore tty_ldisc_wait_idle
  SERIAL: blacklist si3052 chip
  drivers/serial/bfin_5xx.c: Fix line continuation defects
  tty: prevent DOS in the flush_to_ldisc
  8250: add support for Kouwell KW-L221N-2
  nozomi: Fix warning from the previous TIOCGCOUNT changes
  tty: fix warning in synclink driver
  tty: Fix formatting in tty.h
  tty: the development tree is now done in git

MAINTAINERS

@@ -161,7 +161,7 @@ M:	Greg Kroah-Hartman <gregkh@suse.de>
 L:	linux-serial@vger.kernel.org
 W:	http://serial.sourceforge.net
 S:	Maintained
-T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git
 F:	drivers/serial/8250*
 F:	include/linux/serial_8250.h
 
@@ -5910,7 +5910,7 @@ S:	Maintained
 TTY LAYER
 M:	Greg Kroah-Hartman <gregkh@suse.de>
 S:	Maintained
-T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git
 F:	drivers/char/tty_*
 F:	drivers/serial/serial_core.c
 F:	include/linux/serial_core.h

drivers/char/amiserial.c

@@ -1299,7 +1299,6 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
 {
 	struct async_struct * info = tty->driver_data;
 	struct async_icount cprev, cnow;	/* kernel counter temps */
-	struct serial_icounter_struct icount;
 	void __user *argp = (void __user *)arg;
 	unsigned long flags;
 

drivers/char/nozomi.c

@@ -1828,7 +1828,6 @@ static int ntty_ioctl(struct tty_struct *tty, struct file *file,
 		      unsigned int cmd, unsigned long arg)
 {
 	struct port *port = tty->driver_data;
-	void __user *argp = (void __user *)arg;
 	int rval = -ENOIOCTLCMD;
 
 	DBG1("******** IOCTL, cmd: %d", cmd);

drivers/char/pcmcia/synclink_cs.c

@@ -2796,6 +2796,7 @@ static const struct tty_operations mgslpc_ops = {
 	.hangup = mgslpc_hangup,
 	.tiocmget = tiocmget,
 	.tiocmset = tiocmset,
+	.get_icount = mgslpc_get_icount,
 	.proc_fops = &mgslpc_proc_fops,
 };
 

drivers/serial/8250.c

@@ -2343,7 +2343,10 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	/*
 	 * CTS flow control flag and modem status interrupts
+	 * Only disable MSI if no threads are waiting in
+	 * serial_core::uart_wait_modem_status
 	 */
+	if (!waitqueue_active(&up->port.state->port.delta_msr_wait))
 		up->ier &= ~UART_IER_MSI;
 	if (!(up->bugs & UART_BUG_NOMSR) &&
 			UART_ENABLE_MS(&up->port, termios->c_cflag))

drivers/serial/8250_pci.c

@@ -2285,6 +2285,8 @@ static struct pciserial_board pci_boards[] __devinitdata = {
 
 static const struct pci_device_id softmodem_blacklist[] = {
 	{ PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */
+	{ PCI_VDEVICE(MOTOROLA, 0x3052), }, /* Motorola Si3052-based modem */
+	{ PCI_DEVICE(0x1543, 0x3052), }, /* Si3052-based modem, default IDs */
 };
 
 /*
@@ -2863,6 +2865,9 @@ static struct pci_device_id serial_pci_tbl[] = {
 		PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL,
 		0, 0,
 		pbn_b0_4_1152000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0x9505,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_bt_2_921600 },
 
 		/*
 		 * The below card is a little controversial since it is the

drivers/serial/bfin_5xx.c

@@ -23,6 +23,7 @@
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
 #include <linux/serial_core.h>
+#include <linux/dma-mapping.h>
 
 #if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
 	defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
@@ -33,12 +34,10 @@
 #include <asm/gpio.h>
 #include <mach/bfin_serial_5xx.h>
 
-#ifdef CONFIG_SERIAL_BFIN_DMA
-#include <linux/dma-mapping.h>
+#include <asm/dma.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/cacheflush.h>
-#endif
 
 #ifdef CONFIG_SERIAL_BFIN_MODULE
 # undef CONFIG_EARLY_PRINTK
@@ -360,7 +359,6 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
 		UART_PUT_CHAR(uart, xmit->buf[xmit->tail]);
 		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 		uart->port.icount.tx++;
-		SSYNC();
 	}
 
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
@@ -688,6 +686,13 @@ static int bfin_serial_startup(struct uart_port *port)
 
 # ifdef CONFIG_BF54x
 	{
+		/*
+		 * UART2 and UART3 on BF548 share interrupt PINs and DMA
+		 * controllers with SPORT2 and SPORT3. UART rx and tx
+		 * interrupts are generated in PIO mode only when configure
+		 * their peripheral mapping registers properly, which means
+		 * request corresponding DMA channels in PIO mode as well.
+		 */
 		unsigned uart_dma_ch_rx, uart_dma_ch_tx;
 
 		switch (uart->port.irq) {
@@ -734,8 +739,7 @@ static int bfin_serial_startup(struct uart_port *port)
 			IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
 			IRQF_DISABLED, "BFIN_UART_CTS", uart)) {
 			uart->cts_pin = -1;
-			pr_info("Unable to attach BlackFin UART CTS interrupt.\
-				 So, disable it.\n");
+			pr_info("Unable to attach BlackFin UART CTS interrupt. So, disable it.\n");
 		}
 	}
 	if (uart->rts_pin >= 0) {
@@ -747,8 +751,7 @@ static int bfin_serial_startup(struct uart_port *port)
 	if (request_irq(uart->status_irq,
 		bfin_serial_mctrl_cts_int,
 		IRQF_DISABLED, "BFIN_UART_MODEM_STATUS", uart)) {
-		pr_info("Unable to attach BlackFin UART Modem \
-			Status interrupt.\n");
+		pr_info("Unable to attach BlackFin UART Modem Status interrupt.\n");
 	}
 
 	/* CTS RTS PINs are negative assertive. */
@@ -846,6 +849,8 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
 	if (termios->c_cflag & CMSPAR)
 		lcr |= STP;
 
+	spin_lock_irqsave(&uart->port.lock, flags);
+
 	port->read_status_mask = OE;
 	if (termios->c_iflag & INPCK)
 		port->read_status_mask |= (FE | PE);
@@ -875,8 +880,6 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
 	if (termios->c_line != N_IRDA)
 		quot -= ANOMALY_05000230;
 
-	spin_lock_irqsave(&uart->port.lock, flags);
-
 	UART_SET_ANOMALY_THRESHOLD(uart, USEC_PER_SEC / baud * 15);
 
 	/* Disable UART */
@@ -1321,6 +1324,14 @@ struct console __init *bfin_earlyserial_init(unsigned int port,
 	struct bfin_serial_port *uart;
 	struct ktermios t;
 
+#ifdef CONFIG_SERIAL_BFIN_CONSOLE
+	/*
+	 * If we are using early serial, don't let the normal console rewind
+	 * log buffer, since that causes things to be printed multiple times
+	 */
+	bfin_serial_console.flags &= ~CON_PRINTBUFFER;
+#endif
+
 	if (port == -1 || port >= nr_active_ports)
 		port = 0;
 	bfin_serial_init_ports();

drivers/tty/n_gsm.c

@@ -716,8 +716,8 @@ static void __gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg)
 		if (msg->len < 128)
 			*--dp = (msg->len << 1) | EA;
 		else {
-			*--dp = (msg->len >> 6) | EA;
-			*--dp = (msg->len & 127) << 1;
+			*--dp = ((msg->len & 127) << 1) | EA;
+			*--dp = (msg->len >> 6) & 0xfe;
 		}
 	}
 
@@ -2375,6 +2375,7 @@ static int gsmld_config(struct tty_struct *tty, struct gsm_mux *gsm,
 	gsm->mru = c->mru;
 	gsm->encoding = c->encapsulation;
 	gsm->adaption = c->adaption;
+	gsm->n2 = c->n2;
 
 	if (c->i == 1)
 		gsm->ftype = UIH;

drivers/tty/tty_buffer.c

@@ -413,7 +413,8 @@ static void flush_to_ldisc(struct work_struct *work)
 	spin_lock_irqsave(&tty->buf.lock, flags);
 
 	if (!test_and_set_bit(TTY_FLUSHING, &tty->flags)) {
-		struct tty_buffer *head;
+		struct tty_buffer *head, *tail = tty->buf.tail;
+		int seen_tail = 0;
 		while ((head = tty->buf.head) != NULL) {
 			int count;
 			char *char_buf;
@@ -423,6 +424,15 @@ static void flush_to_ldisc(struct work_struct *work)
 			if (!count) {
 				if (head->next == NULL)
 					break;
+				/*
+				  There's a possibility tty might get new buffer
+				  added during the unlock window below. We could
+				  end up spinning in here forever hogging the CPU
+				  completely. To avoid this let's have a rest each
+				  time we processed the tail buffer.
+				*/
+				if (tail == head)
+					seen_tail = 1;
 				tty->buf.head = head->next;
 				tty_buffer_free(tty, head);
 				continue;
@@ -432,7 +442,7 @@ static void flush_to_ldisc(struct work_struct *work)
 			   line discipline as we want to empty the queue */
 			if (test_bit(TTY_FLUSHPENDING, &tty->flags))
 				break;
-			if (!tty->receive_room) {
+			if (!tty->receive_room || seen_tail) {
 				schedule_delayed_work(&tty->buf.work, 1);
 				break;
 			}

drivers/tty/tty_ldisc.c

@@ -47,6 +47,7 @@
 
 static DEFINE_SPINLOCK(tty_ldisc_lock);
 static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_wait);
+static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_idle);
 /* Line disc dispatch table */
 static struct tty_ldisc_ops *tty_ldiscs[NR_LDISCS];
 
@@ -83,6 +84,7 @@ static void put_ldisc(struct tty_ldisc *ld)
 		return;
 	}
 	local_irq_restore(flags);
+	wake_up(&tty_ldisc_idle);
 }
 
 /**
@@ -530,6 +532,23 @@ static int tty_ldisc_halt(struct tty_struct *tty)
 	return cancel_delayed_work_sync(&tty->buf.work);
 }
 
+/**
+ *	tty_ldisc_wait_idle	-	wait for the ldisc to become idle
+ *	@tty: tty to wait for
+ *
+ *	Wait for the line discipline to become idle. The discipline must
+ *	have been halted for this to guarantee it remains idle.
+ */
+static int tty_ldisc_wait_idle(struct tty_struct *tty)
+{
+	int ret;
+	ret = wait_event_interruptible_timeout(tty_ldisc_idle,
+			atomic_read(&tty->ldisc->users) == 1, 5 * HZ);
+	if (ret < 0)
+		return ret;
+	return ret > 0 ? 0 : -EBUSY;
+}
+
 /**
  *	tty_set_ldisc		-	set line discipline
  *	@tty: the terminal to set
@@ -634,8 +653,17 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
 
 	flush_scheduled_work();
 
+	retval = tty_ldisc_wait_idle(tty);
+
 	tty_lock();
 	mutex_lock(&tty->ldisc_mutex);
+
+	/* handle wait idle failure locked */
+	if (retval) {
+		tty_ldisc_put(new_ldisc);
+		goto enable;
+	}
+
 	if (test_bit(TTY_HUPPED, &tty->flags)) {
 		/* We were raced by the hangup method. It will have stomped
 		   the ldisc data and closed the ldisc down */
@@ -669,6 +697,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
 
 	tty_ldisc_put(o_ldisc);
 
+enable:
 	/*
 	 *	Allow ldisc referencing to occur again
 	 */
@@ -714,9 +743,12 @@ static void tty_reset_termios(struct tty_struct *tty)
  *	state closed
  */
 
-static void tty_ldisc_reinit(struct tty_struct *tty, int ldisc)
+static int tty_ldisc_reinit(struct tty_struct *tty, int ldisc)
 {
-	struct tty_ldisc *ld;
+	struct tty_ldisc *ld = tty_ldisc_get(ldisc);
+
+	if (IS_ERR(ld))
+		return -1;
 
 	tty_ldisc_close(tty, tty->ldisc);
 	tty_ldisc_put(tty->ldisc);
@@ -724,10 +756,10 @@ static void tty_ldisc_reinit(struct tty_struct *tty, int ldisc)
 	/*
 	 *	Switch the line discipline back
 	 */
-	ld = tty_ldisc_get(ldisc);
-	BUG_ON(IS_ERR(ld));
 	tty_ldisc_assign(tty, ld);
 	tty_set_termios_ldisc(tty, ldisc);
+
+	return 0;
 }
 
 /**
@@ -802,13 +834,16 @@ void tty_ldisc_hangup(struct tty_struct *tty)
 	   a FIXME */
 	if (tty->ldisc) {	/* Not yet closed */
 		if (reset == 0) {
-			tty_ldisc_reinit(tty, tty->termios->c_line);
+
+			if (!tty_ldisc_reinit(tty, tty->termios->c_line))
 				err = tty_ldisc_open(tty, tty->ldisc);
+			else
+				err = 1;
 		}
 		/* If the re-open fails or we reset then go to N_TTY. The
 		   N_TTY open cannot fail */
 		if (reset || err) {
-			tty_ldisc_reinit(tty, N_TTY);
+			BUG_ON(tty_ldisc_reinit(tty, N_TTY));
 			WARN_ON(tty_ldisc_open(tty, tty->ldisc));
 		}
 		tty_ldisc_enable(tty);

drivers/tty/vt/vc_screen.c

@@ -553,12 +553,12 @@ static unsigned int
 vcs_poll(struct file *file, poll_table *wait)
 {
 	struct vcs_poll_data *poll = vcs_poll_data_get(file);
-	int ret = 0;
+	int ret = DEFAULT_POLLMASK|POLLERR|POLLPRI;
 
 	if (poll) {
 		poll_wait(file, &poll->waitq, wait);
-		if (!poll->seen_last_update)
-			ret = POLLIN | POLLRDNORM;
+		if (poll->seen_last_update)
+			ret = DEFAULT_POLLMASK;
 	}
 	return ret;
 }